SUBMITTAL B-136.4G JOB:
REPRESENTATIVE:
UNIT TAG:
ORDER NO.
ENGINEER:
SUBMITTED BY:
CONTRACTOR:
DATE: DATE: DATE:
APPROVED BY:
Series 80 In-Line Mounted Centrifugal Pumps SPECIFICATIONS FLOW HP
MATERIALS OF CONSTRUCTION HEAD
ALL IRON
RPM
MAXIMUM WORKING PRESSURE
VOLTS CYCLE
BRONZE FITTED
PHASE
ENCLOSURE APPROX. WEIGHT SPECIALS
© COPYRIGHT 2007 ITT, Corporation
175 psi (12 bar) W.P. with 125# ANSI flange drilling 250 psi (17 bar) W.P. with 250# ANSI flange drilling (requires 80-S) 300 psi (21 bar) W.P. with 250# ANSI flange drilling (EPR-Sintered Silicon Carbide-Sintered Silicon Carbide) Requires 80-S
TYPE OF SEAL 80 Standard Seal (Buna-Carbon/Ceramic) 80 -F Standard Seal w/ Flush Line (Buna-Carbon/Ceramic) 80 -S Stuffing Box construction w/ Flushed Mechanical Single Seal (EPR-Tungsten Carbide/Carbon) 80 -D Stuffing Box construction w/ Flushed Double Mechanical Seal (EPR-Carbon/Ceramic) Requires external water source 80 -PF Stuffing Box Construction w/ Flushed Packing (Graphite Impregnated Teflon)
Bell & Gossett
SUBMITTAL B-136.4G JOB:
REPRESENTATIVE:
UNIT TAG:
ORDER NO.
ENGINEER:
SUBMITTED BY:
CONTRACTOR:
DATE: DATE: DATE:
APPROVED BY:
Series 80 In-Line Mounted Centrifugal Pumps SPECIFICATIONS FLOW HP
MATERIALS OF CONSTRUCTION HEAD
ALL IRON
RPM
MAXIMUM WORKING PRESSURE
VOLTS CYCLE
BRONZE FITTED
PHASE
ENCLOSURE APPROX. WEIGHT SPECIALS
© COPYRIGHT 2007 ITT, Corporation
175 psi (12 bar) W.P. with 125# ANSI flange drilling 250 psi (17 bar) W.P. with 250# ANSI flange drilling (requires 80-S) 300 psi (21 bar) W.P. with 250# ANSI flange drilling (EPR-Sintered Silicon Carbide-Sintered Silicon Carbide) Requires 80-S
TYPE OF SEAL 80 Standard Seal (Buna-Carbon/Ceramic) 80 -F Standard Seal w/ Flush Line (Buna-Carbon/Ceramic) 80 -S Stuffing Box construction w/ Flushed Mechanical Single Seal (EPR-Tungsten Carbide/Carbon) 80 -D Stuffing Box construction w/ Flushed Double Mechanical Seal (EPR-Carbon/Ceramic) Requires external water source 80 -PF Stuffing Box Construction w/ Flushed Packing (Graphite Impregnated Teflon)
Bell & Gossett
SUBMITTAL B-136.4G JOB:
REPRESENTATIVE:
UNIT TAG:
ORDER NO.
ENGINEER:
SUBMITTED BY:
CONTRACTOR:
DATE: DATE: DATE:
APPROVED BY:
Series 80 In-Line Mounted Centrifugal Pumps SPECIFICATIONS FLOW HP
MATERIALS OF CONSTRUCTION HEAD
ALL IRON
RPM
MAXIMUM WORKING PRESSURE
VOLTS CYCLE
BRONZE FITTED
PHASE
ENCLOSURE APPROX. WEIGHT SPECIALS
© COPYRIGHT 2007 ITT, Corporation
175 psi (12 bar) W.P. with 125# ANSI flange drilling 250 psi (17 bar) W.P. with 250# ANSI flange drilling (requires 80-S) 300 psi (21 bar) W.P. with 250# ANSI flange drilling (EPR-Sintered Silicon Carbide-Sintered Silicon Carbide) Requires 80-S
TYPE OF SEAL 80 Standard Seal (Buna-Carbon/Ceramic) 80 -F Standard Seal w/ Flush Line (Buna-Carbon/Ceramic) 80 -S Stuffing Box construction w/ Flushed Mechanical Single Seal (EPR-Tungsten Carbide/Carbon) 80 -D Stuffing Box construction w/ Flushed Double Mechanical Seal (EPR-Carbon/Ceramic) Requires external water source 80 -PF Stuffing Box Construction w/ Flushed Packing (Graphite Impregnated Teflon)
Bell & Gossett
Series 80
Centrifugal Pump Submittal
B-136.4G
FLANGE DIMENSIONS IN INCHES (MM) SIZE
THICKNESS
O.D.
Discharge
1-1/2"
13/16 (21)
6 (187)
Suction
1-1/2"
13/16 (21)
6 (152)
** Motor may be supplied with feet
DIMENSIONS − Inches (mm) MOTOR FRAME 143 145 182 184 213 215 254 256 284 286
A
B
C
D
E (Max)
F
9-1/2 (241) 9-1/2 (241) 9-1/2 (241) 9-1/2 (241) 9-1/2 (241) 9-1/2 (241) 9-1/2 (241) 9-1/2 (241) 9-1/2 (241) 9-1/2 (241)
19 (483) 19 (483) 19 (483) 19 (483) 19 (483) 19 (483) 19 (483) 19 (483) 19 (483) 19 (483)
5-7/8 (149) 5-7/8 (149) 5-7/8 (149) 5-7/8 (149) 5-7/8 (149) 5-7/8 (149) 5-7/8 (149) 5-7/8 (149) 5-7/8 (149) 5-7/8 (149)
6-1/4 (159) 6-1/4 (159) 6-1/4 (159) 6-1/4 (159) 6-1/4 (159) 6-1/4 (159) 6-1/4 (159) 6-1/4 (159) 6-1/4 (159) 6-1/4 (159)
11-5/8 (295) 12-5/8 (321) 15-5/16 (389) 15-5/16 (389) 19-1/4 (489) 19-1/4 (489) 24-1/8 (613) 24-1/8 (613) 23-5/8 (600) 25-1/8 (638)
4-11/16 (119) 4-11/16 (119) 4-11/16 (119) 4-11/16 (119) 4-11/16 (119) 4-11/16 (119) 8-9/16 (217) 8-9/16 (217) 8-9/16 (217) 8-9/16 (217)
STANDARD SEAL 80, 80-F 125# ANSI G H (Max) J N P 4-1/2 20-7/8 3-7/8 5/8 4 (114) (530) (98) (16) 4-1/2 21-7/8 3-7/8 5/8 4 (114) (556) (98) (16) 4-1/2 24-1/2 3-7/8 5/8 4 (622) (114) (98) (16) 4-1/2 24-1/2 3-7/8 5/8 4 (114) (622) (98) (16) 4-1/2 28-1/2 3-7/8 5/8 4 (114) (724) (98) (16) 4-1/2 28-1/2 3-7/8 5/8 4 (114) (724) (98) (16) 4-1/2 37-1/4 3-7/8 5/8 4 (946) (114) (98) (16) 4-1/2 37-1/4 3-7/8 5/8 4 (946) (114) (98) (16) 4-1/2 36-3/4 3-7/8 5/8 4 (114) (933) (98) (16) 4-1/2 38-1/4 3-7/8 4 5/8 (114) (972) (98) (102) (16)
250# ANSI J N P 4-1/2 7/8 4 (114) (22) 4-1/2 7/8 4 (114) (22) 4-1/2 7/8 4 (114) (22) 4-1/2 7/8 4 (114) (22) 4-1/2 7/8 4 (114) (22) 4-1/2 7/8 4 (114) (22) 4-1/2 7/8 4 (114) (22) 4-1/2 7/8 4 (114) (22) 4-1/2 7/8 4 (114) (22) 4-1/2 4 7/8 (114) (102) (22)
R
S (Max)*
T
V (Min)
9-3/4 (248) 9-3/4 (248) 11-3/4 (298) 11-3/4 (298) 14 (356) 14 (356) 17 (432) 17 (432) 16-1/8 (410) 16-1/8 (410)
1-1/2 (38) 1-1/2 (38) 1 (25) 1 (25)
4-5/8 (117) 4-5/8 (117)
12-1/8 (308) 12-1/8 (308) 12-1/8 (308) 12-1/8 (308) 12-1/8 (308) 12-1/8 (308) 12-1/8 (308) 12-1/8 (308) 12-1/8 (308) 12-1/8 (308)
4 (102) 4 (102) 4 (102) 4 (102) 4 (102) 4 (102) 4 (102) 4 (102) 4 (102) 4 (102)
R
S (Max)*
T
V (Min)
9-3/4 (248) 9-3/4 (248) 11-3/4 (298) 11-3/4 (298) 14 (356) 14 (356) 17 (432) 17 (432) 16-1/8 (410) 16-1/8 (410)
1-1/2 (38) 1-1/2 (38) 1 (25) 1 (25)
12-1/8 (308) 12-1/8 (308) 12-1/8 (308) 12-1/8 (308) 12-1/8 (308) 12-1/8 (308) 12-1/8 (308) 12-1/8 (308) 12-1/8 (308) 12-1/8 (308)
4 (102) 4 (102) 4 (102) 4 (102) 4 (102) 4 (102) 4 (102) 4 (102) 4 (102) 4 (102)
− − − −
STUFFING BOX 80-PF, 80-S, 80-D 125# ANSI J N P 9-1/2 19 5-7/8 6-1/4 11-5/8 7-13/16 4-1/2 24 3-7/8 5/8 143 4 (295) (610) (241) (483) (149) (159) (198) (114) (98) (16) 9-1/2 19 5-7/8 6-1/4 12-5/8 7-11/16 4-1/2 25 3-7/8 5/8 145 4 (321) (635) (241) (483) (149) (159) (195) (114) (98) (16) 9-1/2 19 5-7/8 6-1/4 15-5/16 7-13/16 4-1/2 27-5/8 3-7/8 5/8 182 4 (241) (483) (149) (159) (389) (198) (114) (702) (98) (16) 9-1/2 19 5-7/8 6-1/4 15-5/16 7-13/16 4-1/2 27-5/8 3-7/8 5/8 184 4 (241) (483) (149) (159) (389) (198) (114) (702) (98) (16) 9-1/2 19 5-7/8 6-1/4 19-1/4 8-9/16 4-1/2 32-3/8 3-7/8 5/8 213 4 (241) (483) (149) (159) (489) (217) (114) (822) (98) (16) 9-1/2 19 5-7/8 6-1/4 19-1/4 8-9/16 4-1/2 32-3/8 3-7/8 5/8 215 4 (241) (483) (149) (159) (489) (217) (114) (822) (98) (16) 9-1/2 19 5-7/8 6-1/4 24-1/8 8-9/16 4-1/2 37-1/4 3-7/8 5/8 254 4 (241) (483) (149) (159) (613) (217) (114) (946) (98) (16) 9-1/2 19 5-7/8 6-1/4 24-1/8 8-9/16 4-1/2 37-1/4 3-7/8 5/8 256 4 (241) (483) (149) (159) (613) (217) (114) (946) (98) (16) 9-1/2 19 5-7/8 6-1/4 23-5/8 8-9/16 4-1/2 36-3/4 3-7/8 5/8 284 4 (241) (483) (149) (159) (600) (217) (114) (933) (98) (16) 9-1/2 19 5-7/8 6-1/4 25-1/8 8-9/16 4-1/2 38-1/8 3-7/8 4 5/8 286 (241) (483) (149) (159) (638) (217) (114) (968) (98) (102) (16) Dimensions are subject to change. Not to be used for construction purposes unless certified. MOTOR FRAME
A
B
C
D
E (Max)
F
NOTE: For 1 phase Motors add 1" to dimensions E & H. *For TEFC Motors add S dimension to dimensions E& H. ITT 8200 N. Austin Avenue Morton Grove, IL 60053 Phone (847)966-3700 Facsimile (847)966-9052 www.bellgossett.com
G
H (Max)
250# ANSI J N P 4-1/2 7/8 4 (114) (22) 4-1/2 7/8 4 (114) (22) 4-1/2 7/8 4 (114) (22) 4-1/2 7/8 4 (114) (22) 4-1/2 7/8 4 (114) (22) 4-1/2 7/8 4 (114) (22) 4-1/2 7/8 4 (114) (22) 4-1/2 7/8 4 (114) (22) 4-1/2 7/8 4 (114) (22) 4-1/2 4 7/8 (114) (102) (22)
− − − − 4-5/8 (117) 4-5/8 (117)