Different Tips to Clean a Car Battery by Emanualonline If you have an old battery or a mechanical failure, then perhaps an automotive specialist needs intervention. But if the problem is just enough that your battery needs to be cleaned, then there is something that you can do yourself. Here Emanualonline gives you some tips to clean your car battery. First and foremost, turn off your engine. While cleaning the terminals it is quite a simple DIY project, yet there is little risk of injury. When you work, you can make sure that you have the engine closed or not.
Next, release the walnut holding your negative cable; you will need a wrench for it. Separate the cable from the post. Then, follow the same steps with positive cables. Just take some time to visually inspect your car's battery. Especially look for any crack or crack. If you see any one, it means that there is a problem with your car battery that you might not be able to fix on your own; there is not much chance, you are looking at the need to replace batteries.
You would also like to see cable and clamp yourself. Then, what you see is a very clear evidence of wear and tear. If you have large hips or tears in your cables or clamps, you probably will need to change them. These things cannot really be modified. Suppose you do not see any of these obvious signs of wear and tear, then you would like to mix your cleaning solution - one teaspoon of baking soda into one cup of water. Mix well, and then immerse an old toothbrush in the mix. Use toothbrush to remove any traces of corrosion that appear on your battery terminals. To clean the squeak does not really need to be completely scared. You may have to soak your toothbrush twice or twice in the mixture of baking soda, because you keep scrubbing away. When you finish, use a spray bottle with cold water to rinse any residue. It is important to make sure that all baking soda and Jung are washed. Then, use an old rag or towel to pat the battery and dry it completely. Use a little petroleum jelly to lubricate the terminals. Bring the cable to their correct terminals. If you want to know more information you can visit our website.