Technical information Certification
THE TIVE' C E T O PR 'P ION SOLUT
FIREFLEX-S FIRE ROLLER SHUTTER - DATA SHEET
CE Mark (Declaration of conformity) Type Approval (Chiltern Dynamics - UKAS approved test laboratory) Testing Laboratory (BRE Testing – UKAS approved test laboratory) Compliant with Part 1 BS EN 13241-1: 2003 Mechanical Aspects EN12604, Safety in use of power operated doors. Side guide protection EN 12604: 2000 4.5.1 and EN 12453: 2000 5.1.1.3 Protection Against crushing, shearing or drawing in Electrical Safety Depending on the use Water Tightness EN 12489 Resistance to Wind Load EN 12444 Fire Resistance test B.S.476 : Part 22 : 1987 Integrity 241 minutes (4 hours) Air permeability EN 12427 Gravity and self-closing EN 12453 - 5.1.1.5 Anti fall back device EN 12453 - 5.1.1.5 Installation Instructions EN 12635: 2002 4.1.1.1 Durability of Mechanical Performance EN 12635: 2002 4.1.1.1
DIM D 130
ELEVATION
HEAD ROOM CLEARANCE (DIM B)
DIMENSION A
350
DIMENSION A
350
TEST: BRE Test report number 220737 ASSESSMENT: Assessment report number CC 224355 INETGRITY: 240 minutes
min 60
SPACE FOR CONNECTING CABLE
A. MASONRY GUIDE FIXING
A
Vertical Slot
157
Products Insulated Roller Shutter SERVICES LTD A DIVISION OF P&D GROUP
systems operated Roller Shutter Door Product Description: Power Safedrive Equipped with ELEKTROMATEN® Operator sizes 170Nm –1400Nm EC Guidelines Complies with the following Directive EC Construction Products 89/106/ Low Voltage Directive 73/23EEC Machinery Directive 98/37/EC Compatibility Directive 89/336/EEC Electromagnetic comply with the following above-mentioned products We hereby certify that the gly to their determination: standards when used accordin BS EN 13241-1 Annex ZA Chilt/P05003/01 BS EN 12489:2000 Water tightness Chilt/P05003/01 BS EN 12444:2000 Resistance to wind load Chilt/P05003/01 BS EN 12427:2000 Air permeability Chilt/PO5003/03 BS EN 12453:2000 Operating forces TorFV 4/023/024/025/026 12604:2000 EN BS dropping Safeguarding against
SOFFIT ANGLE
230 150
184
336
A
DIRECT DRIVE MOTOR CLEARANCE
A
GALVANISED STEEL HOOD
PLAN
L
DIM C 184
WIDTH
HEIGHT
DIM A
DIM B
2500
2500
400
450
3000
3000
450
500
4000
4000
450
500
5000
5000
500
550
6000
6000
550
600
7000
7000
600
650
Door hood addition - Dim B + 50
All Dimensions in mm
Manufactured by
Approved Laboratories: Wycombe HP14 4AD Lane, Hughenden Valley High Chiltern Dynamics Stocking until it has must not be put into service declaration of conformity relates rers instructions The Machinery to which this accordance with the manufactu assembled and installed in provisions of the been completely and safely to be in conformity with the installation has been declared and not until the complete machinery directive.
Danks Graham This declaration is made GRAHAM DANKS
95
CLEAR OPENING WIDTH OF SHUTTER 184
R
Manufacturer:
30
B. STEELWORK GUIDE FIXING
OPERATION The door is arranged for an electric motor unit with fusible link or solenoid release unit complete with built on starter, or direct drive maintained power.
2003 According to BS EN 13241-1:
B
30
MAIN SUPPORT BRACKETS Main support plates for the barrel and motor unit manufactured from mild steel. Support plates to BS 4360/43A with perimeter welded angles and structure support angles.
EC Declaration of Conformity
SECTION A - A FITTING SPACE FOR CONTROLS
BARREL Manufactured from seamless mild steel tube to BS4760 Grade 50C. Maximum barrel deflection measured at 1:400, fitted with precisionmachined BDMS axles to BS970 EN33 with end fitted plate wheel.
VERTICAL SIDE GUIDES Formed from pre-galvanized material having a minimum thickness of 2.5mm. The door guide is designed to allow reduced working face and tapered inner faces to provide automatic interlock/retaining feature.
300
OPENING HEIGHT
190
SHUTTER CURTAIN Manufactured from pre-galvanized material, 75mm curved lath. The curtain, when assembled is held in position with purposely-designed end fittings, which act as a curtain alignment system. The bottom panel of the shutter is terminated with a galvanized steel angle with horizontal and vertical slots.
by
MANAGING DIRECTOR PRODUCTS INSULATED ROLLER SHUTTER
A Division of P&D Group Services Ltd
C
Motor Controlled Descent Direct Drive Power to Close
THE IVE' T C E T PRO TION 'P SOLU
FIREFLEX S - THE PROTECTIVE SOLUTION DIM D 130
ELEVATION
HEAD ROOM CLEARANCE (DIM B)
DIMENSION A
350
DIMENSION A
350
FIRE ROLLER SHUTTER SHUTTER CURTAIN Manufactured from pre-galvanized material, 75mm curved lath. The curtain, when assembled is held in position with purposely designed end fittings, which act as a curtain alignment system. The bottom panel of the shutter is terminated with a galvanized steel angle with horizontal and vertical slots.
300
OPENING HEIGHT
190
min 60
SPACE FOR CONNECTING CABLE
OPERATION The door is arranged for an electric motor unit with fusible link or solenoid release unit complete with built on starter, or direct drive maintained power.
SECTION A - A FITTING SPACE FOR CONTROLS
A. MASONRY GUIDE FIXING
A
ORDER INFORMATION
B
30
JOB No:
30 Vertical Slot
ORDER No: B. STEELWORK GUIDE FIXING
OPENING HEIGHT: OPENING WIDTH:
157
95
GUIDE TYPE: DELIVERY DATE:
CLEAR OPENING WIDTH OF SHUTTER 184
SOFFIT ANGLE
230 150
DELIVERY ADDRESS:
184
336
A
DIRECT DRIVE MOTOR CLEARANCE
A R
GALVANISED STEEL HOOD
PLAN
L
DIM C
GENERAL NOTES:
WIDTH
HEIGHT
DIM A
DIM B
2500
2500
350
450
3000
3000
400
500
4000 5000
4000 5000
400 450
550 600
6000
6000
500
650
Door hood addition - Dim B + 50
Manufactured by
All Dimensions in mm
A Division of P&D Group Services Ltd
184
C
Dock Shelters
Resellers’ price list Nr. LS09-2
Armo s.p.a. – Via Rosa di Luxemburg, 1 – 10093 Collegno (To) Italy Tel: +39-011-7176011 Fax: +39-011-7176019 E-mail:info@armoweb.com Web: http://www.armoweb.com
armo
Resellers’ price list Pag. 2 di 3
Dock shelters are necessary to correctly isolate your staff and goods of your warehouses from bad weather conditions and sudden variations of temperature. With the installation of ARMO dock shelters you save on a lot of energy.
STRUCTURE
Dock shelter with front part in black rubber with differential stiffness. Opening/closing device through swinging scissors. The truck, by coming back, can press the dock shelter structure without causing damages. Self-carrying structure in SENDMIR galvanized steel tube, telescopic type, to deaden possible impacts with trucks. Structure front part in pre-painted white steel. Frontal realized in anti-wearing black rubber plates with anti-cut warp Covering tarpaulin in polyester PVC, anti-flame Class 2 Warning arrows to centre the truck.
armo
Resellers’ price list Pag. 3 di 3
Flat roof model PIW-S Structure characteristics Outside width Side panels Upper panel Outside height Depth
mm mm mm mm mm
3400 700 1000 3500 650
Flat roof model PIW-T Structure characteristics Outside width Side panels Upper panel Outside height Depth
mm mm mm mm mm
3400 700 1000 4500 650
Tech. features can change without advise. This booklet is not to be considered as a contract and all the information are to be considered as advises. Errors and omissis can be found. Photos and drawings are for illustration proposal only.