70-0063_GE_TechMan_V2.0 by Emi Eguchi

AVT Prosilica GE

Technical Manual AVT GigE Vision Cameras

70-0063 V2.0.0 14 July 2011

Allied Vision Technologies Canada Inc. 101-3750 North Fraser Way V5J 5E9, Burnaby, BC / Canada

Legal notice For customers in the U.S.A. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However there is no guarantee that interferences will not occur in a particular installation. If the equipment does cause harmful interference to radio or television reception, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the distance between the equipment and the receiver. • Use a different line outlet for the receiver. • Consult a radio or TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. The shielded interface cable recommended in this manual must be used with this equipment in order to comply with the limits for a computing device pursuant to Subpart A of Part 15 of FCC Rules. For customers in Canada This apparatus complies with the Class A limits for radio noise emissions set out in the Radio Interference Regulations. Pour utilisateurs au Canada Cet appareil est conforme aux normes classe A pour bruits radioélectriques, spécifiées dans le Règlement sur le brouillage radioélectrique. Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Allied Vision Technologies customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Allied for any damages resulting from such improper use or sale. Trademarks Unless stated otherwise, all trademarks appearing in this document of Allied Vision Technologies are brands protected by law. Warranty The information provided by Allied Vision Technologies is supplied without any guarantees or warranty whatsoever, be it specific or implicit. Also excluded are all implicit warranties concerning the negotiability, the suitability for specific applications or the non-breaking of laws and patents. Even if we assume that the information supplied to us is accurate, errors and inaccuracy may still occur. Copyright All texts, pictures and graphics are protected by copyright and other laws protecting intellectual property. It is not permitted to copy or modify them for trade use or transfer, nor may they be used on web sites. Allied Vision Technologies Canada Inc. 7/2011 All rights reserved. Managing Director: Mr. Frank Grube TaxID: 889528709 Headquarters: 101-3750 North Fraser Way V5J 5E9, Burnaby, BC / Canada

AVT Prosilica GE Technical Manual V2.0.0 2

Contents Contacting Allied Vision Technologies ............................................................. 5 Introduction .................................................................................................................. 6 Document history ...................................................................................................... 6 Symbols used in this manual ........................................................................................ 7 Warranty.................................................................................................................. 7 Precautions .............................................................................................................. 8 Cleaning the sensor ................................................................................................... 9

Conformity.................................................................................................................... 10 Specifications ............................................................................................................. 11 Prosilica GE680/GE680C............................................................................................. 11 Prosilica GE1050/GE1050C ......................................................................................... 13 Prosilica GE1650/GE1650C ......................................................................................... 15 Prosilica GE1660/GE1660C ......................................................................................... 17 Prosilica GE1900/GE1900C ......................................................................................... 19 Prosilica GE1910/GE1910C ......................................................................................... 21 Prosilica GE2040/GE2040C ......................................................................................... 23 Prosilica GE4000/GE4000C ......................................................................................... 25 Prosilica GE4900/GE4900C ......................................................................................... 27 Camera attribute highlights ........................................................................................ 29

IR cut filter: spectral transmission .................................................................... 30 Camera dimensions.................................................................................................. 31 Prosilica GE (C-Mount)............................................................................................... 31 Prosilica GE (F-mount)............................................................................................... 32 Prosilica GE large format (F-mount) ............................................................................. 33 Tripod adapter ......................................................................................................... 34 Adjustment of lens mount .......................................................................................... 35

Camera interfaces .................................................................................................... 37 Camera I/O connector pin assignment .......................................................................... 38 Sync input............................................................................................................... 40 AVT Prosilica GE Technical Manual V2.0.0 3

Sync output ............................................................................................................. 41 Camera power .......................................................................................................... 42 Gigabit Ethernet port ................................................................................................ 42 Camera I/O connector internal circuit diagram ............................................................... 43 Camera I/O connector external circuit example .............................................................. 44 Sync connectors external circuit example ...................................................................... 45

Notes on triggering................................................................................................... 46 Timing diagram ........................................................................................................ 46 Signal definitions ..................................................................................................... 47 Trigger rules ............................................................................................................ 48

Firmware update ....................................................................................................... 49 Resolution and ROI frame rates.......................................................................... 50 CAMERA: Prosilica GE680............................................................................................ 50 CAMERA: Prosilica GE1050 .......................................................................................... 51 CAMERA: Prosilica GE1650 .......................................................................................... 51 CAMERA: Prosilica GE1660 .......................................................................................... 52 CAMERA: Prosilica GE1900 .......................................................................................... 52 CAMERA: Prosilica GE1910 .......................................................................................... 53 CAMERA: Prosilica GE2040 .......................................................................................... 53 CAMERA: Prosilica GE4000 .......................................................................................... 54 CAMERA: Prosilica GE4900 .......................................................................................... 54 Prosilica GE frame rate performance comparison ............................................................. 55

Additional references .............................................................................................. 56 Prosilica GE webpage................................................................................................. 56 Prosilica GE Documentation ........................................................................................ 56 AVT GigE PvAPI SDK ................................................................................................... 56 Knowledge Base ....................................................................................................... 56 Case Studies ............................................................................................................ 56 Prosilica GE Firmware ................................................................................................ 56

AVT Prosilica GE Technical Manual V2.0.0 4

Contacting Allied Vision Technologies â&#x20AC;˘

Technical information: http://www.alliedvisiontec.com

â&#x20AC;˘

Support: support@alliedvisiontec.com

Allied Vision Technologies GmbH Taschenweg 2a 07646 Stadtroda, Germany Tel.: +49.36428.677-0 Fax.: +49.36428.677-28 e-mail: info@alliedvisiontec.com Allied Vision Technologies Inc. 38 Washington Street Newburyport, MA 01950, USA Toll Free number +1-877-USA-1394 Tel.: +1 978-225-2030 Fax: +1 978-225-2029 e-mail: info@alliedvisiontec.com Allied Vision Technologies Canada Inc. 101-3750 North Fraser Way Burnaby, BC, V5J 5E9, Canada Tel: +1 604-875-8855 Fax: +1 604-875-8856 e-mail: info@alliedvisiontec.com Allied Vision Technologies Asia Pte. Ltd. 82 Playfair Road #07-02 D'Lithium Singapore 368001 Tel. +65 6634-9027 Fax:+65 6634-9029 e-mail: info@alliedvisiontec.com

AVT Prosilica GE Technical Manual V2.0.0 5

IIntrod ductiion This AV VT Prosilica GE G Technicall Manual desscribes in deppth the techn nical specificcations of this camera family including dimensions,, feature oveerview, I/O definition, trigger timing waveforms, frame rate performance,, etc. For info ormation on software insstallation reaad the AVT GiigE Installattion Manuall. For dettailed information on cam mera featuress and controols specific too the Prosilicca GX, GE, GS, GB and GC referr to the AVT Prosilica P GiggE Camera an nd Driver Atttributes doccument. AVVT Prosilica GE literature: htttp://www.alliedvisiontecc.com/us/suupport/down nloads/produuctliteerature/prossilica-ge.htm ml

Pleease read thrrough this m anual carefuully.

D Docum ment history h y Versio on

Date

Remarks

V2.0.0 0

14.07.11

New Manuual â&#x20AC;&#x201C; SERIAL Status Table 1: Doccument Histoory

AVT Proosilica GE Tecchnical Manuual V2.0.0 6

S Symbo ols us sed in this manua m al Thiis symbol hig ghlights impportant inform mation

ghlights impportant instruuctions. You have to folloow these Thiis symbol hig insstructions to avoid malfuunctions.

ghlights URLLs for furtherr information n. The URL itsself is Thiis symbol hig sho own in blue. Exaample: htttp://www.alliedvisiontecc.com

W Warra anty Alllied Vision Teechnologies Canada provvides a 2 yearr warranty which covvers the repllacement andd repair of alll AVT parts w which are fouund to be defective in thee normal usee of this prodduct. AVT willl not warran nty parts wh hich have beeen damaged through thee obvious missuse of this pproduct.

AVT Proosilica GE Tecchnical Manuual V2.0.0 7

P Precautions s DO O NOT OPEN THE T CAMERA A. WARRANTTY IS VOID IFF CAMERA IS OP PENED. Thiis camera contains sensittive components which ccan be damagged if handled incorrrectly.

KEEEP SHIPPING MATERIALL. Poor packaging g of this prodduct can cause damage dduring shippiing.

VERIFY ALL EXT XTERNAL CON NNECTIONS. Verify all external connectiions in termss of voltage llevels, power quirements, voltage polaarity, and siggnal integrityy prior to pow wering req thiis device.

CLEANING. ning agents.. Avoid Thiis product caan be damag ed by some vvolatile clean cleeaning the im mage sensor unless absollutely necesssary. Please see insstructions on n sensor cleaaning in this document.

DO O NOT EXCEED D ENVIRONM MENTAL SPECCIFICATIONSS. See environmeental specificcations limitss in the Speccifications seection of n a reasonable thiis document.. Special carre is requiredd to maintain operating temp perature. If the camera iis to be operated in a warrm environment, it is suggesteed that the camera be moounted on a heat sink succh as a metal bracket andd that there iis sufficient air flow.

AVT Proosilica GE Tecchnical Manuual V2.0.0 8

Cleaning th he sensor DO O NOT CON NTACT CLEAN SENSSOR UNLEESS AB BSOLUTELLY NECESSARY Identiffying Debriss Debris on the image sensor or optical components w will appear as a darkened area or smudge on the image that doees not move as the t camera is moved. m Do not confuse this wiith a pixel defeect which will apppear as a distinct point.

Locatin ng Debris Before attempting to clean the imagee sensor, it is im mportant to firsst determine that the problem m is due to debris on n the sensor wiindow. To do th his you should be viewing a unniform image, such as a piecee of paper, with the camera. Debriss will appear ass a dark spot orr dark region thhat does not moove as the cameera is moved. To determine that t the debris is not on the caamera lens, rottate the lens independent of tthe camera. If the spot mo oves as the lenss moves, then t he object is on the lens -not oon the image seensor- and therefore cleaning is no ot required. If the camera ha s an IR filter, t hen rotate the IR filter. If thee object moves th hen the particlee is on the IR filter not the sennsor. If this is the case removve the IR filter ccarefully using a small s flat head screw driver. Clean both sidees of the IR filtter using the saame techniquess as explaineed below for thee sensor window.

DO O NOT TOUCCH ANY OPT PTICS WITH FINGERS. OIL FROM M FINGERS CAN N DAMAGE FRAGILE O OPTICAL CO OATINGS.

Cleanin ng with Air If it is deetermined that debris is on the sensor windoow, then removve the camera leens, and blow tthe sensor window directly with cllean compresseed air. If canneed air is used, ddo not shake or tilt the can priior to blowing the sensor. Vieew a live image with the cameera after blowinng. If the debris is still there, repeat this process. Repeat the prrocess a number of times with increased inteensity until it is determined th hat the particulaate cannot be dislodged. d If this is the case thhen proceed too the contact cleeaning techniqque.

Contacct Cleaning Only usee this method as a last resort. Use 99% laborratory quality isopropyl alcoh hol and clean cootton swabs. Dampen D the sw wab in the alcoh hol and gently w wipe the sensor in a single strroke. Do not reeuse the same swab. Do not wip pe the sensor if the sensor andd swab are bothh dry. You mustt wipe the sensoor quickly after imm mersion in the alcohol, or glue from the swaab will contaminnate the sensor window. Repeat this process until the debriss is gone. If thiis process fails to remove the debris, then coontact AVT.

AVT Proosilica GE Tecchnical Manuual V2.0.0 9

Conformity Allied Vision Technologies declares under its sole responsibility that all standard cameras of the AVT Prosilica GE family to which this declaration relates are in conformity with the following standard(s) or other normative document(s): •

CE, following the provisions of 2004/108/EG directive

•

FCC Part 15 Class A

•

RoHS (2002/95/EC)

We declare, under our sole responsibility, that the previously described AVT Prosilica GE cameras conform to the directives of the CE.

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

AVT Prosilica GE Technical Manual V2.0.0 10

Specifications Prosilica

GE680/GE680C

Resolution Sensor Type Sensor size Cell size Lens mount Max frame rate at full resolution A/D On-board FIFO Bit depth Mono formats Color formats Exposure control Gain control Horizontal binning Vertical binning TTL I/Os (galvanic isolation) RS-232 Power requirements Power consumption

640 x 480 pixels Kodak KAI-0340 CCD Progressive 1/3 inch 7.4μm C 205 fps 12 bit 32 MB 8/12 Mono8, Mono16 (monochrome models only) Bayer8, Bayer16, YUV411, YUV422, YUV444, RGB24, BGR24, RGBA24, BGRA24 25 μs to 60 seconds; 1 μs increments 0 to 34 dB 1 to 8 pixels 1 to 8 rows 1 input, 3 outputs 1 5-24 VDC Typical < 4.5W (@ 12 VDC); (full resolution and maximal frame rates) 169g (without lens) 39mm (height) x 51mm (width) x 80mm (length); including connectors, without tripod and lens 0 0C … +50 0C ambient temperature (without condensation) -10 0C … +70 0C ambient temperature (without condensation) 1.2μs ±10ns 90ns 20 to 80% non-condensing IEEE 802.3 1000BASE-T, 100BASE-TX GigE Vision Standard 1.0 CE, FCC Class A, RoHS (2002/95/EC)

Mass Dimensions Operating temperature Storage temperature Trigger latency Trigger jitter Tpd Operating humidity Hardware interface standard Software interface standard Regulatory

Table 2: Prosilica GE680 camera specification

AVT Prosilica GE Technical Manual V2.0.0 11

Figure 1 â&#x20AC;&#x201C; Prosilica GE680 monochrom me spectral response

Figure 2 â&#x20AC;&#x201C; Prosilica GEE680C color sspectral respponse

Thee design and d specificatioons for the prroducts desccribed above may chaange without notice.

AVT Proosilica GE Tecchnical Manuual V2.0.0 12

Specifications Prosilica

GE1050/GE1050C

1024 x 1024 pixels Kodak KAI-01050 CCD Progressive 1/2 inch 5.5μm C 59 fps 12 bit 32 MB 8/12 Mono8, Mono16 (monochrome models only) Bayer8, Bayer16, YUV411, YUV422, YUV444, RGB24, BGR24, RGBA24, BGRA24 10 μs to 60 seconds; 1 μs increments 0 to 34 dB 1 to 8 pixels 1 to 8 rows 1 input, 3 outputs 1 5-24 VDC Typical < 5W (@ 12 VDC); (full resolution and maximal frame rates) 178g (without lens) 39mm (height) x 51mm (width) x 80mm (length); including connectors, without tripod and lens 0 0C … +50 0C ambient temperature (without condensation) -10 0C … +70 0C ambient temperature (without condensation) 5μs ±10ns 90ns 20 to 80% non-condensing IEEE 802.3 1000BASE-T, 100BASE-TX GigE Vision Standard 1.0 CE, FCC Class A, RoHS (2002/95/EC)

Mass Dimensions Operating temperature Storage temperature Trigger latency Trigger jitter Tpd Operating humidity Hardware interface standard Software interface standard Regulatory

Table 3: Prosilica GE1050 camera specification

AVT Prosilica GE Technical Manual V2.0.0 13

Figure F 3 â&#x20AC;&#x201C; Pro osilica GE105 50 monochroome spectrall response

Figure 4 â&#x20AC;&#x201C; Prosilica GEE1050C colorr spectral ressponse

Thee design and d specificatioons for the prroducts desccribed above may chaange without notice.

AVT Proosilica GE Tecchnical Manuual V2.0.0 14

Specifications Prosilica

GE1650/GE1650C

1600 x 1200 pixels Kodak KAI-2020 CCD Progressive 1 inch 7.4μm C 32 fps 12 bit 32 MB 8/12 Mono8, Mono16 (monochrome models only) Bayer8, Bayer16, YUV411, YUV422, YUV444, RGB24, BGR24, RGBA24, BGRA24 50 μs to 60 seconds; 1 μs increments 0 to 34 dB 1 to 8 pixels 1 to 8 rows 1 input, 3 outputs 1 5-24 VDC Typical < 5W (@ 12 VDC); (full resolution and maximal frame rates) 169g (without lens) 39mm (height) x 51mm (width) x 80mm (length); including connectors, without tripod and lens 0 0C … +50 0C ambient temperature (without condensation) -10 0C … +70 0C ambient temperature (without condensation) 5μs ±10ns 90ns 20 to 80% non-condensing IEEE 802.3 1000BASE-T, 100BASE-TX GigE Vision Standard 1.0 CE, FCC Class A, RoHS (2002/95/EC)

Mass Dimensions Operating temperature Storage temperature Trigger latency Trigger jitter Tpd Operating humidity Hardware interface standard Software interface standard Regulatory

Table 4: Prosilica GE1650 camera specification

AVT Prosilica GE Technical Manual V2.0.0 15

Figure 5 â&#x20AC;&#x201C; Pro osilica GE165 50 monochroome spectrall response

Figure 6 â&#x20AC;&#x201C; Prosilica GEE1650C colorr spectral ressponse

Thee design and d specificatioons for the prroducts desccribed above may chaange without notice.

AVT Proosilica GE Tecchnical Manuual V2.0.0 16

Specifications Prosilica

GE1660/GE1660C

Resolution Sensor Type Sensor size Cell size

1600 x 1200 pixels Kodak KAI-02050 CCD Progressive 2/3 inch

Lens mount Max frame rate at full resolution A/D On-board FIFO Bit depth Mono formats Color formats Exposure control Gain control Horizontal binning Vertical binning TTL I/Os (galvanic isolation) RS-232 Power requirements Power consumption Mass Dimensions Operating temperature Storage temperature Trigger latency Trigger jitter Tpd Operating humidity Hardware interface standard Software interface standard Regulatory

5.5μm C 34.6 fps 12 bit 32 MB 8/12 Mono8, Mono16 (monochrome models only) Bayer8, Bayer16, YUV411, YUV422, YUV444, RGB24, BGR24, RGBA24, BGRA24 10 μs to 60 seconds; 1 μs increments 0 to 34 dB 1 to 8 pixels 1 to 8 rows 1 input, 3 outputs 1 5-24 VDC Typical < 5W (@ 12 VDC); (full resolution and maximal frame rates) 178g (without lens) 39mm (height) x 51mm (width) x 80mm (length); including connectors, without tripod and lens 0 0C … +50 0C ambient temperature (without condensation) -10 0C … +70 0C ambient temperature (without condensation) 5μs ±10ns 90ns 20 to 80% non-condensing IEEE 802.3 1000BASE-T, 100BASE-TX GigE Vision Standard 1.0 CE, FCC Class A, RoHS (2002/95/EC)

Table 5: Prosilica GE1660 camera specification

AVT Prosilica GE Technical Manual V2.0.0 17

Figure 7 â&#x20AC;&#x201C; Pro osilica GE166 60 monochroome spectrall response

Figure 8 â&#x20AC;&#x201C; Prosilica GEE1660C colorr spectral ressponse

Thee design and d specificatioons for the prroducts desccribed above may chaange without notice.

AVT Proosilica GE Tecchnical Manuual V2.0.0 18

Specifications Prosilica

GE1900/GE1900C

Resolution Sensor Type Sensor size Cell size

1920 x 1080 pixels Kodak KAI-2093 CCD Progressive 1 inch

7.4μm C 30 fps 12 bit 32 MB 8/12 Mono8, Mono16 (monochrome models only) Bayer8, Bayer16, YUV411, YUV422, YUV444, RGB24, BGR24, RGBA24, BGRA24 50 μs to 60 seconds; 1 μs increments 0 to 34 dB 1 to 8 pixels 1 to 8 rows 1 input, 3 outputs 1 5-24 VDC Typical < 5W (@ 12 VDC); (full resolution and maximal frame rates) 169g (without lens) 39mm (height) x 51mm (width) x 80mm (length); including connectors, without tripod and lens 0 0C … +50 0C ambient temperature (without condensation) -10 0C … +70 0C ambient temperature (without condensation) 5μs ±10ns 90ns 20 to 80% non-condensing IEEE 802.3 1000BASE-T, 100BASE-TX GigE Vision Standard 1.0 CE, FCC Class A, RoHS (2002/95/EC)

Table 6: Prosilica GE1900 camera specification

AVT Prosilica GE Technical Manual V2.0.0 19

Figure 9 â&#x20AC;&#x201C; Pro osilica GE190 00 monochroome spectrall response

Figure 10 â&#x20AC;&#x201C; Prosilica GEE1900C colorr spectral ressponse

Thee design and d specificatioons for the prroducts desccribed above may chaange without notice. AVT Proosilica GE Tecchnical Manuual V2.0.0 20

Specifications Prosilica

GE1910/GE1910C

Resolution Sensor Type Sensor size Cell size

1920 x 1080 pixels Kodak KAI- 02150 CCD Progressive 2/3 inch

5.5μm C 32 fps 12 bit 32 MB 8/12 Mono8, Mono16 (monochrome models only) Bayer8, Bayer16, YUV411, YUV422, YUV444, RGB24, BGR24, RGBA24, BGRA24 10 μs to 60 seconds; 1 μs increments 0 to 34 dB 1 to 8 pixels 1 to 8 rows 1 input, 3 outputs 1 5-24 VDC Typical < 5W (@ 12 VDC); (full resolution and maximal frame rates) 178g (without lens) 39mm (height) x 51mm (width) x 80mm (length); including connectors, without tripod and lens 0 0C … +50 0C ambient temperature (without condensation) -10 0C … +70 0C ambient temperature (without condensation) 5μs ±10ns 90ns 20 to 80% non-condensing IEEE 802.3 1000BASE-T, 100BASE-TX GigE Vision Standard 1.0 CE, FCC Class A, RoHS (2002/95/EC)

Table 7: Prosilica GE1910 camera specification

AVT Prosilica GE Technical Manual V2.0.0 21

Figure 11 â&#x20AC;&#x201C; Prosilica GE1910 monochroome spectral response

Figure 12 â&#x20AC;&#x201C; Prosilica GEE1910C colorr spectral ressponse

Thee design and d specificatioons for the prroducts desccribed above may chaange without notice. AVT Proosilica GE Tecchnical Manuual V2.0.0 22

Specifications Prosilica

GE2040/GE2040C

Resolution Sensor Type Sensor size Cell size

2040 x 2048 pixels Kodak KAI- 04022 CCD Progressive 1.2 inch

7.4μm C/F 15 fps 12 bit 32 MB 8/12 Mono8, Mono16 (monochrome models only) Bayer8, Bayer16, YUV411, YUV422, YUV444, RGB24, BGR24, RGBA24, BGRA24 75 μs to 60 seconds; 1 μs increments 0 to 34 dB 1 to 8 pixels 1 to 8 rows 1 input, 3 outputs 1 5-24 VDC Typical < 5.5W (@ 12 VDC); (full resolution and maximal frame rates) 169g (without lens) 39mm (height) x 51mm (width) x 80mm (length); including connectors, without tripod and lens 0 0C … +50 0C ambient temperature (without condensation) -10 0C … +70 0C ambient temperature (without condensation) 4.2μs ±10ns 90ns 20 to 80% non-condensing IEEE 802.3 1000BASE-T, 100BASE-TX GigE Vision Standard 1.0 CE, FCC Class A, RoHS (2002/95/EC)

Table 8: Prosilica GE2040 camera specification

AVT Prosilica GE Technical Manual V2.0.0 23

Figure 13 â&#x20AC;&#x201C; Prosilica GE2040 monochroome spectral response

Figure 14 â&#x20AC;&#x201C; Prosilica GEE2040C colorr spectral ressponse

Thee design and d specificatioons for the prroducts desccribed above may chaange without notice.

AVT Proosilica GE Tecchnical Manuual V2.0.0 24

Specifications Prosilica

GE4000/GE4000C

Resolution Sensor Type Sensor size Cell size

4008 x 2672 pixels Kodak KAI-11002 CCD Progressive 35mm

9μm F 5 fps 12 bit 32 MB 8/12 Mono8, Mono16 (monochrome models only) Bayer8, Bayer16, YUV411, YUV422, YUV444, RGB24, BGR24, RGBA24, BGRA24 625 μs to 60 seconds; 1 μs increments 0 to 34 dB 1 to 8 pixels 1 to 8 rows 1 input, 3 outputs 1 5-24 VDC Typical < 6W(@ 12 VDC); (full resolution and maximal frame rates) 402g (without lens) 66mm (height) x 66mm (width) x 110mm (length); including connectors, without tripod and lens 0 0C … +50 0C ambient temperature (without condensation) -10 0C … +70 0C ambient temperature (without condensation) 4.2μs ±10ns 90ns 20 to 80% non-condensing IEEE 802.3 1000BASE-T, 100BASE-TX GigE Vision Standard 1.0 CE, FCC Class A, RoHS (2002/95/EC)

Table 9: Prosilica GE4000 camera specification

AVT Prosilica GE Technical Manual V2.0.0 25

Figure 15 â&#x20AC;&#x201C; Prosilica GE4000 monochroome spectral response

Figure 16 â&#x20AC;&#x201C; Prosilica GEE4000C colorr spectral ressponse

Thee design and d specificatioons for the prroducts desccribed above may chaange without notice. AVT Proosilica GE Tecchnical Manuual V2.0.0 26

Specifications Prosilica

GE4900/GE4900C

Resolution Sensor Type Sensor size Cell size

4872 x 3248 pixels Kodak KAI-16000 CCD Progressive 35mm

7.4μm F 3 fps 12 bit 32 MB 8/12 Mono8, Mono16 (monochrome models only) Bayer8, Bayer16, YUV411, YUV422, YUV444, RGB24, BGR24, RGBA24, BGRA24 625 μs to 60 seconds; 1 μs increments 0 to 34 dB 1 to 8 pixels 1 to 8 rows 1 input, 3 outputs 1 5-24 VDC Typical < 6W(@ 12 VDC); (full resolution and maximal frame rates) 391g (without lens) 66mm (height) x 66mm (width) x 110mm (length); including connectors, without tripod and lens 0 0C … +50 0C ambient temperature (without condensation) -10 0C … +70 0C ambient temperature (without condensation) 4.2μs ±10ns 90ns 20 to 80% non-condensing IEEE 802.3 1000BASE-T, 100BASE-TX GigE Vision Standard 1.0 CE, FCC Class A, RoHS (2002/95/EC)

Table 10: Prosilica GE4900 camera specification

AVT Prosilica GE Technical Manual V2.0.0 27

Figure 17 â&#x20AC;&#x201C; Prosilica GE4900 monochroome spectral response

Figure 18 â&#x20AC;&#x201C; Prosilica GEE4900C colorr spectral ressponse

Thee design and d specificatioons for the prroducts desccribed above may chaange without notice.

AVT Proosilica GE Tecchnical Manuual V2.0.0 28

C Camera attrribute e highllights AVT cam meras support a number of standard aand extendeed features. TThe table beelow identifiies the most interesting capabilities c of this camera family. A complete lissting of cameraa controls, in ncluding conttrol definitioons can be foound in the A AVT Prosilicaa GigE Cameraa and Driverr Attributes document. AVVT Prosilica GiigE Camera aand Driver Atttributes doccument onlin ne: http p://www.alliedvisio ontec.com/fileadm min/content/PDF/SSoftware/Prosilicaa_software/Prosilicca_firmware/ AVT_ _Camera_and_Drivver_Attributes.pdff

Control Gain control c

Sp pecification n Manual M and auuto

Exposure control

Manual M and auuto

Whitebalance

Reed and blue channel; maanual and autto control

Extern nal trigger evvent

Riising edge, ffalling edge, any edge, leevel high, levvel low

Extern nal trigger deelay

0 to 60 secondds; 1 us increements

Fixed rate control

0..001 fps to m maximum frame rate

Imaging modes

Frree-running,, external trigger, fixed rrate, softwarre trigger

Sync Out O modes

Trrigger ready,, trigger inpuut, exposing, readout, im maging, sttrobe, GPO

Region of Interestt (ROI)

in ndependent x and y contrrol with 1 pixxel resolutioon

Multiccast

Sttreaming to multiple PC

Event Channel

In n-camera eveents includinng exposure start and triggger are assynchronoussly broadcastted to the hoost PC Caaptured imagges are bunddled with attrribute inform mation su uch as expossure and gainn value

Chunkk Data

Tablee 11: Prosilicca GE cameraa and driver aattribute highlights

AVT Proosilica GE Tecchnical Manuual V2.0.0 29

IR cu ut filte er: sp pectrral tra ansm missio on Alll Prosilica GEE color mode ls are equippped with an iinfrared blocck filter (IR R filter). Thiss filter is empployed to stoop infrared w wavelength pphotons fro om passing to o the imagin g device. If the filter is rremoved, images will be dominated by b red and caannot be prooperly color bbalanced. onochrome Prosilica P GE ccameras do not employ an n IR filter. Mo Thee figure belo ow shows thee filter transm mission response for the IRC filter fam mily from Sun nex. Prosilicca GE cameraas utilize thee IRC30 filterr.

Figure F 19: Sunex IRC filteer transmissioon values

AVT Proosilica GE Tecchnical Manuual V2.0.0 30

Camera dimensions Prosilica GE (C-Mount) GE680/C, GE1050/C, GE1650/C, GE1660/C, GE1900/C, GE1910/C, GE2040/C

Figure 20: Prosilica GE models (C-Mount) mechanical dimensions AVT Prosilica GE Technical Manual V2.0.0 31

Prosili P ica GE E (F-m mount) GE2040/C G option

Figure 21: Prosilica GEE (F-Mount) m models mechhanical dimensions

AVT Proosilica GE Tecchnical Manuual V2.0.0 32

Prosilica GE large format (F-mount) GE4000/C, GE4900/C

Figure 22: Prosilica GE large format (F-Mount) models mechanical dimensions

AVT Prosilica GE Technical Manual V2.0.0 33

T Tripod d adap pter A Prosiilica GE cameera can be mounted on a camera tripood by using tthis mountin ng plate. The sam me mounting g plate can be used for alll models witthin the GE caamera familyy.

Thee Prosilica GE tripod mouunt can be prrovided by AVVT P/N: 02-5000A A

2 Prosilica GE tripod moount mechannical drawingg Figure 23:

AVT Proosilica GE Tecchnical Manuual V2.0.0 34

A Adjusttmentt of len ns mo ount Thee C-mount iss adjusted aat the factorry and should d not requirre adjjusting. If for f some reasson, the lenss mount requuires adjustm ment, use thee folllowing meth hod.

Figure F 24: Prrosilica GE (CC-mount) cam mera front view

Looseen Locking Ring Use an adjustable wrench w to loo osen lockingg ring. Be carreful not to sscratch the ccamera. When the t locking riing is loose, unthread th e ring a few tturns from th he camera faace. w suitable for this pprocedure caan be provideed by AVT A wrench P/N 02-5003A..

Imagee to Infinitty Use a c-mount c compatible lens that allows aan infinity foocus. Set thee lens to infinity and image a distant object. The disttance requir ed will depend on the len ns used but ttypically 30 to 50 feet should d suffice. Maake sure the lens is firmlyy threaded oonto the c-moount ring. Rotate R the len ns and c-mount ring untiil the image is focused. CCarefully tighten locking g ring. Recheeck focus.

AVT Proosilica GE Tecchnical Manuual V2.0.0 35

Thee F-mount iss adjusted aat the factory ry and should d not requirre adjjusting. If for f some reasson, the lenss mount requuires adjustm ment, use thee folllowing meth hod.

Figure F 25: Prrosilica GE (FF-Mount) cam mera front view Attach F-mount co ompatible lens mpatible lens that allowss an infinity ffocus. Attach h the lens too the Use an F-mount com cameraa using a counter-clockwiise rotation oof about a quuarter turn. TThe lens should snap into plaace and the lens l flange and a camera fflange shouldd mate over tthe full circumfference. Loosen n F-MOUNT FRONT F ASSEM MBLY Use a 1.5mm 1 hex wrench w to loosen the 3 sett screws thann hold the F--mount frontt assemb bly to the cam mera body. Image to Infinity Set thee lens to infin nity and imag ge a distant oobject. The ddistance requuired will deppend on the lens used, but typically t 30 to t 50 feet sh ould suffice.. Gently move the F-moun nt front ocused, then lock. until fo Pro osilica GE cam meras are shhipped with CC-mount or FF-mount. Thee camera can n also be buiilt with a CS--mount on reequest.

AVT Proosilica GE Tecchnical Manuual V2.0.0 36

C Came era in nterfa aces This chapter gives you y informattion on Gigabbit Ethernet port, inputs and outputss and triggerr features. For accessoriess like cables see: htttp://www.alliedvisiontecc.com/emea//products/aaccessories/ggigeacccessories.htm ml

Figure 26: Prosilica G GE connectioon diagram

AVT Proosilica GE Tecchnical Manuual V2.0.0 37

C Camera I/O connector pin as ssignm ment Pin

Signal

Directioon

Level

Descrription

Camera In

TTL max. 5 V

Camerra Input Galvan nic isolation (GPIn1)

Camera Out 2

Out

TTL max. 5 V

Camerra Output 2 Galvan nic isolation (GPOuut2)

Camera Out 3

Out

TTL max. 5 V

Camerra Output 3 Galvan nic isolation (GPOuut3)

RxD RS232

RS232

Termin nal Receive Daata

TxD RS232

Out

RS232

Termin nal Transmit D Data

Reserved

---

Reserved

---

Reserved

---

Reserved

---

Isolated GND D

---

Isolated GND D

---

Isolated GND D

---

Tablle 12: Prosili ca GE I/O connector definition The Gen neral Purposse I/O port usses a Hirose HR10A-10R--12SB conneector on the ccamera side. The T mating caable connecttor is Hirose HR10A-10P--12P. Thiis cable side Hirose connnector can bee purchased ffrom AVT. P/N: K7600039 9

AVT Proosilica GE Tecchnical Manuual V2.0.0 38

Camerra In This inp put signal (G GPIn1) allowss the cameraa to be synchronized to an external evvent. The cam mera can be programmed p d to trigger oon the rising edge, fallingg edge, both h edges, or level of this signal. The cameera can also be programm med to captuure an imagee at some program mmable delaay time after the trigger eevent. O NOT EXCEED D 5.5V ON SIIGNAL INPUTTS. DO Refer to Chapteer Camera I/ O connectorr external circuit examplee on page 44 for wiring in nformation.

nd Camera Out 3 Camerra Out 2 an These signals s (GPOu ut2 and GPOut3) functionn as outputs and can be cconfigured aas followss: Exposin ng

Correspondss to when cam mera is integgrating light.

Trigger Ready

Indicates wh hen the cameera will acceppt a trigger ssignal.

Trigger Input

A relay of the trigger inpput signal used to â&#x20AC;&#x153;daisy chainâ&#x20AC;? the trigger signaal for multiple cameras.

Readou ut

Valid when camera c is reaading out datta.

Imaging

Valid when camera c is expposing or reaading out.

Strobe

Programmab ble pulse bassed on one of the above eevents.

GPO

User program mmable binaary output.

t above sig gnals can bee set for activve high or acttive low. Any of the

32 RXD and d RS-232 TX XD RS-23 These signals s are RSS-232 compaatible. Thesee signals alloow communication from the host system via the Etheernet port to a peripherall device connnected to thee camera. Noote that these signals s are no ot isolated and thereforee careful atteention should be used wh hen designiing cabling in noisy environments.

AVT Proosilica GE Tecchnical Manuual V2.0.0 39

Isolatted Ground d Isolateed Ground mu ust be conneected to the uuserâ&#x20AC;&#x2122;s externnal circuit groound if Sync Input 1 or Syncc Output 1 is to be used.

Signal Ground Signal Ground mustt be connectted to the useerâ&#x20AC;&#x2122;s externall circuit grouund if Cameraa Input 2 or Camera Output 2 is to be used or if the RSS-232 port iss to be used. Note that Siignal Ground d is common with Power Ground G howeever it is goood practice too provide a seeparate ground d connection for power an nd signaling when designning the cabbling.

Video Iris This sig gnal can be used u to drive the video innput of a videeo iris lens. SSee Addenduum.

Reservved These signals s are reeserved for fu uture use an d should be left disconneected.

S Sync input i The Min ni-SMB Trigg ger Input is in nternally connnected to thhe Camera In nput (GPIn1)) of the Generaal Purpose I/O O Port descriibed above. The Min ni-SMB port on the camera uses an Am mphenol 9033-406J-51R connector. A suitablle mating cab ble connecto or is Amp 4133985-3 whichh can be usedd with RG1744 coaxial cable. SM MB to SMB cables can be ppurchased frrom AVT with various lenggths. The 3 meter m length h uses the folllowing: P//N 02-6007A A

AVT Proosilica GE Tecchnical Manuual V2.0.0 40

S Sync outputt This Mini-SMB trigg ger output (G GPOut1) is NO OT internallyy connected tto other cam mera output pins of the Camera C I/O connector c deescribed abovve. This connector is paarticularly usseful for trig gering multiiple camerass in a “daisy cchain” fashion n. It can be configured c as follows: Exposin ng

Correspondss to when cam mera is integgrating light.

Trigger Ready

Indicates wh hen the cameera will acceppt a trigger ssignal.

Trigger Input

A relay of the trigger inpput signal used to “daisy chain” the trigger signaal for multiple cameras.

Readou ut

Valid when camera c is reaading out datta.

Imaging

Valid when camera c is expposing or reaading out.

Strobe

Programmab ble pulse bassed on one of the above eevents.

GPO

User program mmable binaary output.

Any of the t above sig gnals can bee set for activve high or acttive low. Thee Mini-SMB pport on the cam mera uses an Amphenol 903-406J-51 9 1R connectorr. A suitable mating cablle connecctor is Amp 413985-3 whiich can be ussed with RG1174 coaxial ccable. MB to BNC cab bles can be ppurchased froom AVT. SM P//N 02-6014A A

AVT Proosilica GE Tecchnical Manuual V2.0.0 41

C Camera pow wer The Pro osilica GE cam mera family supports s aw wide input power voltage range. The ccamera will nott power in reeverse polaritty. Exceedinng the voltagge range speccified below will damagee the cameraa. N 5V - 24V. 12V Nominal.

1 power ad daptor with bbarrel connector can be oordered from m AVT: A 12V P/N 02-8003A North Ameriica Supply P/N 02-8010C Universal Suupply

G Gigabit Ethe ernet port The Gig gabit Etherneet port confo orms to the IEEEE 802.3 10000BASE-T sttandard for G Gigabit Etherneet over copper. We recom mmend usingg Category 5ee or Categoryy 6 compatible cabling g and connecctors for bestt performancce. • Cable length hs up to 100 m are suppoorted. • The 8-pin RJJ-45 jack hass the pin assiignment acccording to the Ethernet staandard (IEEEE 802.3 10000BASE-T). • Cables with screw-lock cconnectors aare available from AVT: http://www w.alliedvisionntec.com/em mea/products/accessoriees/gigeaccessories..html

AVT Proosilica GE Tecchnical Manuual V2.0.0 42

Camera I/O connector internal circuit diagram HIROSE HR10A-10R-12SB

1 10

2 3

7 6

CAMERA INTERNAL CIRCUIT 1 2 3 4 5 6 7 8 9 10 11 12

TRIGGER INPUT SYNC OUT 2 SYNC OUT 3 RS-232 RXD RS-232 TXD 18 16 14 12

SYNC OUT 3 SYNC OUT 2 SYNC OUT 1

9 7 5 3

AS SEEN FROM CAMERA REAR VIEW

MINI-SMB

TEXAS INSTRUMENTS SN74ACT244PWR 2 1Y1 1A1 4 1Y2 1A2 6 1Y3 1A3 8 1Y4 1A4 2Y1 2Y2 2Y3 2Y4

2A1 2A2 2A3 2A4 1OE 2OE VCC GND

11 13 15 17

ISO+5V

1 19 20 10

ISO_+5V

ISO+5V ISO+5V

MAXIM MAX3221CPWR 0.1u

2 0.1u

3 4

0.1u MINI-SMB

SYNC OUT 1

6 0.1u

7 8

FORCEOFF

C1+

VCC

V+

GND

C1-

DOUT

C2+ C2VRIN

FORCEON DIN INVALID ROUT

15 14 13

RS232-TXD

VDD2 GND2 OUT1 OUT2 IN3 IN4 NC GND2

VDD1 GND1 IN1 IN2 OUT3 OUT4 NC GND1

1 2 3 4 5 6 7 8

VDD2 GND2 OUT1 OUT2 IN3 IN4 NC GND2

LOGIC SYNC OUT 1 LOGIC SYNC OUT 2 LOGIC TRIGGER INPUT

VDD-3.3

NVE IL716-3 16 15 14 13 12 11 10 9

VDD-3.3

NVE IL716-3 16 15 14 13 12 11 10 9

TRIGGER INPUT

OUT

ISO+5V TRIGGER INPUT

VDD1 GND1 IN1 IN2 OUT3 OUT4 NC GND1

1 2 3 4 5 6 7 8

LOGIC SYNC OUT 3 LOGIC TXD LOGIC RXD

12 11

ISO TXD

10 9

ISO RXD ISO+5V

RS232-RXD ISOLATED 5V POWER ISOLATED GROUND

Maxim MAX3221CPWR Used to drive the RS232 signal logic via the external connector

GALVANIC ISOLATION BOUNDARY

Texas Instruments SN74ACT244PWR Used as trigger buffer/driver. The required trigger input current is less than 10uA and the maximum sync output current is 24mA.

Figure 27: Prosilica GE internal circuit diagram

AVT Prosilica GE Technical Manual V2.0.0 43

C Camera I/O con nnectorr external circu uit exam mple US SERS TRIGGER CIRCUIT

CABLE SID DE TRIGGER INPU UT GP PIN1 (5V TTL DRIVER)

SYNC OUT 2 SYNC OUT 3

GP POUT 2 (5V TTL RECEIVER) GP POUT 3 (5V TTL RECEIVER)

1 2 3 4 5 6 7 8 9 10 11 12

9 10

7 4

HIROSE HR10A-10 0P-12P

ONE GROUN ND RETURN IS S SUFFICIEN NT.

Figure 28: 2 Prosilica GE external e circuit

Input: In ncoming trigger must be able to source 10uA. Output: Sync output current is 24mA. ger circuit is connected to a Texaas Instruments SN74ACT244PWR S R buffer/driver in nside the cameraa. The trigg

AVT Prosillica GE Technicall Manual V2.0.0 44

S Sync co onnectorrs exterrnal circ cuit exa ample USERS S TRIGGER CIR RCUIT

RG-174 COAX CABL LE TRIGGER INPUT

GPIN1 (5V V TTL DRIVER)

RG-174 COAX CABL LE SYNC OUT 1

GPOOUT1 1 (5V TTL RECEIVER)

MINI-SMB

OUT

Figure 29: Prrosilica GE sync connector c externnal circuit

Input: Th he required trigg ger input currentt is less than 10u uA Output: The maximum syync output curreent is 24mA.

nected to a Texass Instruments SN N74ACT244PWR buffer/driver insside the camera. Note that the trigger input The triggeer circuit is conn signal is not n terminated to t match the cab ble impedance.

AVT Prosillica GE Technicall Manual V2.0.0 45

Notes on triggering Timing diagram

Figure 30: Prosilica GE internal signal timing waveforms AVT Prosilica GE Technical Manual V2.0.0 46

Signal definitions Term

Definition

User Trigger

Trigger signal applied by the user (hardware trigger, software trigger)

Logic Trigger

Trigger signal seen by the camera internal logic (not visible to the user)

Tpd

Propagation delay between the User Trigger and the Logic Trigger

Exposure

... is high when the camera image sensor is integrating light.

Readout

... is high when the camera image sensor is reading out data.

Trigger Latency

Time delay between the User Trigger and the start of Exposure

Trigger Jitter

Error in the Trigger Latency Time

Trigger Ready

... indicates to the user that the camera will accept the next trigger.

Registered Exposure Time

... is the Exposure Time value currently stored in the camera memory.

Exposure Start Delay

... is the Registered Exposure Time subtracted from the Readout time and indicates when the next Exposure cycle can begin such that the Exposure will end after the current Readout.

Interline Time

... is the time between sensor row readout cycles.

Imaging

... is high when the camera image sensor is either exposing and/or reading out data.

Idle

... is high if the camera image sensor is not exposing and/or reading out data.

Table 13: Explanation of signals in timing diagram

AVT Prosilica GE Technical Manual V2.0.0 47

Trigge er rule es Thee User Trigger pulse widdth should bee at least thrree times thee width of the Trigger Latency L as inndicated in Chapter Speciifications on page 11.

•

E will always triggger the nextt Readout. The end of Exposure

•

The end of Exposure E mu ust always ennd after the ccurrent Readdout.

•

The start off Exposure must m always ccorrespond w with the Inteerline Time iff Readout is true.

•

Expose Starrt Delay equals the Readdout time minnus the Registered Expossure Time.

ng the Idlee State Triggeering durin For app plications req quiring the shortest s posssible Trigger Latency andd the smallesst possiblle Trigger Jittter the User Trigger sign al should bee applied wheen Imaging is false and Idlle is true. In this case, Trigger Latency and Trigger Jitt tter are as inddicated in th he Specificatiions section n.

Triggeering durin ng the Readout Statee For app plications req quiring the fastest f triggeering cycle time wherebyy the camera image sensor is exposing and a reading out simultanneously, then the User Trrigger signall should be applied as soon as a valid Triigger Ready iis detected. In this case, Trigger Latency and Trigger Jitt tter can be upp to 1 line tim me since Expposure must allways begin on an Interliine boundaryy.

AVT Proosilica GE Tecchnical Manuual V2.0.0 48

F Firmw ware upda ate Firmwaare updates are a carried ou ut via the Ethhernet conneection. AVT pprovides an applicaation for all GigE G camerass which loadss firmware too the cameraa using a simple interface. New feaature introdu uctions and product p imprrovements m motivate new w firmware releases. All users are encouraged to usee the newest firmware avaailable and ccomplete thee firmware update if necessary. Do ownload the latest l GigE fiirmware loadder from the AVT website: htttp://www.alliedvisiontec.ccom/us/suppoort/downloads/firmware.httml

To determine the current fi rmware verssion loaded oonto the cam mera, read thee cameraâ&#x20AC;&#x2122;s Device Firmwaare attributee using GigE SSample View wer or thiird party app plications lik e NIâ&#x20AC;&#x2122;s Measuurement and Acquisition asssistant.

Figuree 31: Screenshot of GigE Sample View wer controls window

AVT Proosilica GE Tecchnical Manuual V2.0.0 49

R Reso olution and d ROI fram me ra ates This secction aims to o provide useers with perfoormance infoormation which identifiees the impact of reducing the region of o interest onn the camera’s maximum frame rate. • The camera frame rate ccan be increaased by reduccing the camera's Height attribute, resultiing in a decreased region n of interest (ROI) or "window". • The camera frame rate ccan also be inncreased by iincreasing th he camera's BinningY attribbute, resulting in a vertically scaled image (less overall height withh same field oof view). • There is no frame f rate inncrease with reduced widdth • Frame rate data d was gennerated usingg StreamBytesPerSecondd equals 120 MB and an 8 bit pixeel format succh as Mono8 or Bayer8

C CAMER RA: Pros silica GE680 600 500 400 Height H 300 (p pixels) 200 100 0

500

1000

1500

2000

25500

3000 0

3500

Frame raate

Fig gure 32: Maxiimum frame rate versus rregion heighht for GE680

AVT Proosilica GE Tecchnical Manuual V2.0.0 50

CAMERA: Prosilica GE1050 1200 1000 800 Height 600 (pixels) 400 200 0 0

100

150

200

250

Frame rate

Figure 33: Maximum frame rate versus region height for GE1050

CAMERA: Prosilica GE1650 1400 1200 1000 Height (pixels)

800 600 400 200 0 0

100

120

Frame rate

Figure 34: Maximum frame rate versus region height for GE1650

AVT Prosilica GE Technical Manual V2.0.0 51

CAMERA: Prosilica GE1660 1400 1200 1000 Height (pixels)

800 600 400 200 0 0

100

120

140

160

Frame rate

Figure 35: Maximum frame rate versus region height for GE1660

CAMERA: Prosilica GE1900 1200 1000 800 Height 600 (pixels) 400 200 0 0

Frame rate

Figure 36: Maximum frame rate versus region height for GE1900

AVT Prosilica GE Technical Manual V2.0.0 52

CAMERA: Prosilica GE1910 1200 1000 800 Height 600 (pixels) 400 200 0 0

100

120

140

Frame rate

Figure 37: Maximum frame rate versus region height for GE1910

CAMERA: Prosilica GE2040 2500 2000 1500 Height (pixels) 1000 500 0 0

Frame rate

Figure 38: Maximum frame rate versus region height for GE2040

AVT Prosilica GE Technical Manual V2.0.0 53

CAMERA: Prosilica GE4000 3000 2500 2000 Height 1500 (pixels) 1000 500 0 0

Frame rate

Figure 39: Maximum frame rate versus region height for GE4000

CAMERA: Prosilica GE4900 3500 3000 2500 Height (pixels)

2000 1500 1000 500 0 0

Frame rate

Figure 40: Maximum frame rate versus region height for GE4900

AVT Prosilica GE Technical Manual V2.0.0 54

Prosilica GE frame rate performance comparison 1400 1200 1000

Height (pixels)

800

GE1050 GE1650 GE1660 GE1900 GE1910

600 400 200 0 0

100

150

200

250

Frame rate

Figure 41: Maximum frame rate comparison for select models 3500 3000 2500

Height (pixels)

2000 GE4000

1500

GE4900 1000 500 0 0

Frame rate

Figure 42: Maximum frame rate comparison for select models

AVT Prosilica GE Technical Manual V2.0.0 55

Additional references Prosilica GE webpage http://www.alliedvisiontec.com/us/products/cameras/gigabit-ethernet/prosilica-ge.html

Prosilica GE Documentation http://www.alliedvisiontec.com/us/support/downloads/product-literature/prosilica-ge.html

AVT GigE PvAPI SDK http://www.alliedvisiontec.com/us/products/software/avt-pvapi-sdk.html

Knowledge Base http://www.alliedvisiontec.com/us/support/knowledge-base.html

Case Studies http://www.alliedvisiontec.com/us/products/applications.html

Prosilica GE Firmware http://www.alliedvisiontec.com/us/support/downloads/firmware.html

AVT Prosilica GE Technical Manual V2.0.0 56