AVT 1394 accessories
1394a adapter PCI bus
1394
4601-21
Your dual 1394a adapter for the PCI bus. IOI’s dual 1394a adapter offers users the ability to directly connect up to two cameras of the AVT’s long range of 1394a cameras such as Marlin, Dolphin, Guppy and Oscar to their PC in a very simple way. PCI 32 Bit theoretical bandwidth 1 of up to 132 MByte/s ensures low latency transmission of up to 2x 32 = 64 MByte/s of video data at full speed from even multiple cameras. One 1394a connector per bus allows the direct connection of locking cable. This makes this universal interface adapter ideal for industrial high speed multi camera applications with today’s PC’s.
Highlights z Fully compliant with PCI 2.x at 3.3 V and
5 V signalling environment z Supports 33 MHz 32 bit specification z Up to 132 MByte/s PCI transfer bandwidth z Up to 64 MByte/s total 1394a bus bandwidth z Two separate 1394a buses on one adapter z One port per bus, allowing locking connectors z Up to eight cameras (DMA’s) parallel acquisition z z z z z z z
z
1
Practical bandwidth is lower and dependent on individual systems/software conditions
ALLIED VISION TECHNOLOGIES GMBH Taschenweg 2a | D-07646 Stadtroda | Germany Phone: +49 36428/677-0 | Fax: +49 36428/677-24 www.alliedvisiontec.com | info@alliedvisiontec.com
(bandwidth sharing) Compliant with IEEE 1394a (2000) 1394a data transfer rate up to 400 Mbit/s Easy plug & play Supports Windows and Linux Compatible with all AVT 1394a cameras Upwards compatible with AVT PIKE camera (@ 400 Mbit/s) Compatible with - AVT FirePackage - AVT Fire4Linux (on request) - AVT Direct FirePackage Additional power in connector to supply extra power for multi camera applications
AVT 1394 accessories
1394a adapter PCI bus
Technical Specifications Feature Adapter type 1394 chipset Interface # buses Ports Speed Bandwidth # cameras (DMA’s) OS Support Compliance Power Dimensions Mass External power in Operating temp. Compatibility Options: cables
Description Dual 1394a PCI 2x Ti TSB43AB21 (Integrated link/phy) PCI 2.x 2x 1394a bus 2x 1394a, supplying bus power (max. 1350 mA), but not more than 1500 mA in total 100, 200, 400 Mbit/s transfer rate 50/40/32 MByte/s at 400 Mbit/s (gross/net/video) per bus up to 8 (External repeater for more than 2 cameras required) Windows NT4.0, 2000, XP, 2003, Linux 2.4.x/2.6.x FCC, CE 12 V – 36 V DC, supplying bus power up to 1500 mA max. 120 mm x 120 mm 80 g 13 V – 36 V DC (cable adapter included) +5°C … +50°C AVT FirePackage, AVT Direct FirePackage, AVT Fire4Linux (on request) various lengths, with or without locking on either side, sold separately
Ordering information: Dual OHCI Dual Adapter IOI-4601-21 PCI, 2 OHCI IEEE1394-buses, 2 connectors
K0000206
Cable options: Cable -2x Interlock Cable -2x Interlock Cable -2x Interlock Cable -2x Interlock
IEEE1394a; (2x IEEE1394a; (2x IEEE1394a; (2x IEEE1394a; (2x
Interlock) 4.5 m, for Marlin / Oscar / Guppy Interlock) 10 m, for Marlin / Oscar / Guppy Interlock) 12.5 m, for Marlin / Oscar / Guppy Interlock) 17.5 m, for Marlin / Oscar / Guppy
Notes: Molex clamp locking (aka Interlock) is suitable for AVT Marlin, Guppy, Oscar. Please consult AVT or your local dealer if you require locking connector for Dolphin or third party cameras.
ALLIED VISION TECHNOLOGIES GMBH Taschenweg 2a | D-07646 Stadtroda | Germany Phone: +49 36428/677-0 | Fax: +49 36428/677-24 www.alliedvisiontec.com | info@alliedvisiontec.com
Design and specification of the described product(s) are subject to change without notice. Author: HMA/GBR © 08/2007
K1200064 K1200163 K1200165 K1200162
AVT 1394 accessories
1394b dual bus PCI Express adapter
FWB-PCIE1xE220
1394b DUAL BUS PCI Express adapter with FOUR ports. IOI’s dual 1394b bus PCI Express adapter with four 1394b connectors offers users the ability to directly connect up to 16 cameras to their PC in a very simple way. This PCI Express card is ideal for fast and reliable data transfers into the host system particularly in applications with multiple cameras or high data rates.
Highlights z Dual 1394b buses (OHCI 1.2 draft compliant) z 4 bilingual 1394b ports with locking screw holes z Eight isochronous transmit/receive contexts per bus z Supports 100, 200, 400 and 800MB/s transfer rates z 2.5 Gb/s burst rate of 1-lane PCI Express bus in both
directions z Backward compatible with 1394a (2000) z Complies with PCIe base specification 1.1 z Compatible with all AVT Software Packages z Easy plug & play, no driver required z Internal IDE 4-pin DC power connector z RoHS, CE and FCC compliant
1
ALLIED VISION TECHNOLOGIES GMBH Taschenweg 2a | D-07646 Stadtroda | Germany Phone: +49 36428/677-0 | Fax: +49 36428/677-24 www.alliedvisiontec.com | info@alliedvisiontec.com
For details refer to the corresponding releases
1
AVT 1394 accessories
1394b dual bus PCI Express adapter
Technical Specifications Feature Adapter type PCI Express chipset 1394b chipset Interface Ports Speed DMA Compliance Operating temp. Dimensions Mass External power in
Description Four port dual 1394b bus card with PCI Express interface IDT: 89HPES3T3 2x LSI Logic FW643 PCI Express 1394b link/PHY chip PCI Express, 1 lane 4x 1394b 100, 200, 400, 800 Mb/s transfer rate 8x isochronous transmit/receive contexts per bus RoHS Directive (2002/95/EC), CE, FCC +5°C… 50°C 100 mm x 110 mm 68 g IDE big 4-pin cable adapter +12V included
Ordering information: FWB-PCIE1xE220
Dual OHCI FireWire (4x IEEE 1394b) to PCI Express Host Adapter
K0000385
IEEE1394b; (2x screw lock), with ferrites, 7.5m IEEE1394b; angled left camera side , (2x screw lock), 7.5m, IEEE1394b; angled right camera side, (2x screw lock), 7.5m,
K1200134 K1200295 K1200300
Cable options: Cable 1394b screw lock Cable 1394b angled left Cable 1394b angled right Notes: Please contact your local dealer for further cable lengths and variants!
ALLIED VISION TECHNOLOGIES GMBH Taschenweg 2a | D-07646 Stadtroda | Germany Phone: +49 36428/677-0 | Fax: +49 36428/677-24 www.alliedvisiontec.com | info@alliedvisiontec.com
Design and specification of the described product(s) are subject to change without notice.
© 10/2008
AVT 1394 accessories
1394
1394b adapter with PCI Express
FWB-PCIE1x11B
Your industrial 1394b card with PCI Express. IOI’s PCI Express adapter with three 1394 bilingual connectors with screw locking offers users the ability to connect AVT’s high end cameras, especially of the Stingray and Pike families, to their PC in a very simple way. PCI Express bandwidth of up to 250 1 MByte/s ensures low latency transmission of the up to 64 MByte/s of video data at full speed from AVT’s 1394b cameras. Marlin, Dolphin, Guppy 1
Practical bandwidth is lower and dependent on individual systems/software conditions. Mega = 1.000.000
and Oscar cameras can also be connected by the use of legacy cables. Highlights • • • • • • •
• •
2
ALLIED VISION TECHNOLOGIES GMBH Taschenweg 2a | D-07646 Stadtroda | Germany Phone: +49 36428/677-0 | Fax: +49 36428/677-24 www.alliedvisiontec.com | info@alliedvisiontec.com
Up to 64 MByte/s bus video bandwith Compliant with IEEE 1394b (2002) Backward compatible with IEEE 1394a (2000) Easy plug & play, no driver required Compatible with all AVT 1394b cameras Compatible with all AVT 1394a cameras by the use of legacy cables Compatible with all AVT Software Packages 2 Power in connector to supply power Screw locking for 1394b ports
For details refer to the corresponding releases
AVT 1394 accessories
1394b adapter with PCI Express
Technical Specifications Feature
Description
Adapter Type Host Controller Interface Ports
PCI Express Card with three 1394b cable ports Texas Instruments XIO2213A PCI Express, 1-lane 3 x 1394b, screw locking 3 , supplying bus power (max. 1500 mA) per port 100, 200, 400, 800 Mbps transfer rate 100/80/64 MByte/s at 800 Mbps (gross/net/video) up to 4 (External repeater for more than 3 required) FCC, CE, RoHS Directive (2002/95/EC) 85 mm x 120 mm 52 g 12 V – 32 V DC (big IDE 4-pin cable adapter included 4 ) copper cables various lengths, with or without screw locking at both sides, sold separately
Speed Bandwidth # cameras (DMA’s) Compliance Dimensions Weight External power in Options: Cables
Ordering information: FWB-PCIE1x11B
3x 1394b to PCI-Express Host Adapter, industrial
K0000384
Non-locking Legacy, non-locking IEEE 1394b; 2 x screw lock, 5.0m, black, 2 x ferrite IEEE 1394b; 2 x screw lock, 7.5m, black, 2 x ferrite
K1200122 K1200124 K1200133 K1200134
Cable options: Cable IEEE 1394b 9P –9P; 4.5 m Cable IEEE 1394b 9P –6P; 4.5 m Cable 5.0m 9-Pin-9-Pin, industrial Cable 7.5m 9-Pin-9-Pin, industrial
Notes: Different locking cables available upon request.
3
Screw locking: Do not apply excessive force in order not to damage port or threads. There remains a gap between the connector and the plug. 4 External power is required, when connecting more than one 1394b per card.
ALLIED VISION TECHNOLOGIES GMBH Taschenweg 2a | D-07646 Stadtroda | Germany Phone: +49 36428/677-0 | Fax: +49 36428/677-24 www.alliedvisiontec.com | info@alliedvisiontec.com
Design and specification of the described product(s) are subject to change without notice. : HMA © 10/2008
AVT 1394 accessories
1394b adapter with PCI Express
1394b
FWB-PCIE1x20
Your industrial 1394b card with PCI Express. This PCI Express adapter with two external 1394b bilingual connectors with screw locking offers users the ability to connect AVT’s high-end cameras, especially of the Stingray and Pike families, to their PC in a very simple way. PCI Express bandwidth of up to 250 MByte/s 1 ensures low latency transmission of the up to 64 MByte/s of video data at full speed from AVT’s 1394b cameras. Marlin, Dolphin, Guppy and Oscar cameras can also be connected by the use of legacy cables. 1
Practical bandwidth is lower and dependent on individual systems/software conditions. Mega = 1,000,000
ALLIED VISION TECHNOLOGIES GMBH Taschenweg 2a | D-07646 Stadtroda | Germany Phone: +49 36428/677-0 | Fax: +49 36428/677-24 www.alliedvisiontec.com | info@alliedvisiontec.com
Highlights • • • • • • •
• • •
2
Up to 64 MByte/s bus video bandwidth Compliant with IEEE 1394b (2002) Backward compatible with IEEE 1394a (2000) Easy plug & play, no driver required Compatible with all AVT 1394b cameras Compatible with all AVT 1394a cameras by the use of legacy cables Compatible with all AVT Software Packages 2 Power-in connector to supply bus power Screw locking for 1394b ports Bracket for low-profile PCI enclosed
For details refer to the corresponding releases
AVT 1394 accessories
1394b adapter with PCI Express
Technical Specifications Feature
Description
Adapter Type Chipset Interface Ports
Two ext. port 1394b PCI Express Card LSI643 PCI Express 1394 host controller PCI Express rev. 1.1, x1 lane 2 x 1394 bilingual 3 , screw locking 4 , supplying bus power (max. 1500 mA) per port 100, 200, 400, 800 Mbps transfer rate 100/80/64 MByte/s at 800 Mbps (gross/net/video) up to 8 Windows 2000/XP/Vista/2003 5 , Linux 2.4.x/2.6.x FCC, CE, VCCI, RoHS Directive (2002/95/EC), WEEE Directive (2002/96/EC) 12 V – 32 V DC, supplying bus power, max. 1500 mA +5 °… 50 ° Celsius 135 mm x 120 mm 50 g 13 V – 32 V DC (big IDE 4-pin cable adapter included 6 ) copper cables various lengths, with or without screw locking at both sides, sold separately
Speed Bandwidth # cameras (DMAs) OS Support Compliance Power Operating temp. Dimensions Weight External power in Options: Cables
Ordering information: FWB-PCIE1x20
2x 1394b to PCI-Express Host Adapter, industrial
K0000368
Cable options: Cable IEEE 1394b; 9 pin to 6 pin, 4.5 m IEEE 1394Legacy; 9-pin screw lock, 6-pin Cable IEEE 1394b; 9 pin to 9 pin, 5.0 m IEEE 1394b; 2 x screw lock, 5.0m, black, 2 x ferrite Cable IEEE 1394b; 9 pin to 9 pin, 7.5 m IEEE 1394b; 2 x screw lock, 7.5m, black, 2 x ferrite
K1200288 K1200133 K1200134
Notes: Different locking cables available upon request.
3
Bilingual ports can either operate in 1394b or 1394a, depending on the device (cable) attached. Screw locking: Do not apply excessive force in order not to damage port or threads. There remains a gap between the connector and the plug. 5 DFP may require exchange of MS-driver, depends on service pack 6 External power is required, when connecting more than one 1394b camera per card. 4
ALLIED VISION TECHNOLOGIES GMBH Taschenweg 2a | D-07646 Stadtroda | Germany Phone: +49 36428/677-0 | Fax: +49 36428/677-24 www.alliedvisiontec.com | info@alliedvisiontec.com
Design and specification of the described product(s) are subject to change without notice. : HMA © 06/2008
AVT 1394 accessories
1394
1394b / GOF PCI Express adapter
FWB1GLC-PCIE10
Your industrial 1394b PCI Express card with GOF. IOI’s PCI Express adapter with integrated GOF port offers users the ability to connect AVT’s high end cameras, especially of the Stingray and Pike cameras with integrated GOF port, directly to their PC in a very simple way. This solution enables very long distance applications associated with the elimination of common ground problems without the use of external hubs. The card is equipped with a high quality optical transceiver with LCLC receptacles to bridge distances up to 500 m at 800 Mbps with 50 µm/125 µm multimode fiber. PCI Express 1 bandwidth of up to 250 MByte/s ensures low latency transmission of the up to 64 MByte/s of video data at full speed from AVT’s 1394b cameras. Two additional 1394 bilingual connectors with screw locking enable the direct connection of 1394b cameras with copper interface. Marlin, Dolphin, Guppy and Oscar cameras can also be connected by the use of legacy cables.
Highlights z Up to 64 MByte/s bus video bandwidth z B signalling eliminates common ground z Compliant with IEEE 1394b (2002) z Backward compatible with IEEE 1394a (2000) z Up to 800 Mbps @ 500 m cable length @
850 nm wavelength z GOF port Class 1 laser safety compliant z Multimode fiber 50 µm/125 µm up to
500 m or 62.5 µm/125 µm up to 200 m z Easy plug & play, no driver required z Led for optical connection on card z Compatible with all AVT 1394b cameras z Compatible with all AVT 1394a cameras by the use
of legacy cables 2 z Compatible with all AVT Software Packages z Power in connector to supply power z Screw locking for 1394b ports
2
1
Practical bandwidth is lower and dependent on individual systems/software conditions. Mega = 1.000.000
ALLIED VISION TECHNOLOGIES GMBH Taschenweg 2a | D-07646 Stadtroda | Germany Phone: +49 36428/677-0 | Fax: +49 36428/677-24 www.alliedvisiontec.com | info@alliedvisiontec.com
For details refer to the corresponding releases
AVT 1394 accessories
1394b / GOF PCI Express adapter
Technical Specifications Feature Adapter type PCI Express chipset 1394 chipset Interface Ports
Speed Bandwidth # cameras (DMA’s) OS support Compliance Power Operating temperature Dimensions Mass External power in Options: cables
Description 1394b PCI Express Card with LCLC GOF port PLX Technologies: PEX8111-BB66BC TI TSB82AA2 (link); TI TSB81BA3D (phy) PCI Express, 1 lane 2x 1394 bilingual 3 , screw locking 4 , supplying bus power (max. 1500 mA ) per port; 1x Glass Optical Fiber (GOF) port with LCLC receptacles, removable dust protection for unused port 5 . Small form factor Gigabit optical transceiver with vertical cavity surface emitting laser (VCSEL) @ 850 nm. Supporting S800Beta/ S400Beta/ S200Beta/ S100Beta transfer modes 6 100, 200, 400, 800 Mbps transfer rate 100/80/64 MByte/s at 800 Mbps (gross/net/video) up to 4 (External repeater for more than 3 required) Windows NT4.0, 2000 (FP only); XP, 2003 7 , Linux 2.4.x/2.6.x 8 FCC, CE, RoHS Directive (2002/95/EC), WEEE Directive (2002/96/EC), GOF-transceiver: UL 1950, class 1 laser safety compliant 12 V – 32 V DC, supplying bus power, max. 1500 mA +5°C… 50°C 135 mm x 120 mm 80 g 13 V – 32 V DC (big IDE 4-pin cable adapter included 9 ) GOF cables, various lengths and grades; copper cables various lengths, with or without screw locking at both sides, sold separately
3
Bilingual ports can either operate in 1394b or 1394a, depending on the device (cable) attached. Screw locking: Do not apply excessive force in order not to damage port or threads. There remains a gap between the connector and the plug. 5 Dust protection has to be taken off before fiber cable can be connected. 6 With a 1394a camera or a computer port connected on the electrical side, the GOF port translates to 1394b language, but a 1394a speed (S400Beta/ S200Beta/ S100Beta), thus enabling long distance application and the elimination of the common ground. 7 DFP may require exchange of MS-driver, depending on service pack. 8 On request: Contact your local support. 9 External power is required, when connecting more than one 1394b camera via copper per card. 4
ALLIED VISION TECHNOLOGIES GMBH Taschenweg 2a | D-07646 Stadtroda | Germany Phone: +49 36428/677-0 | Fax: +49 36428/677-24 www.alliedvisiontec.com | info@alliedvisiontec.com
Design and specification of the described product(s) are subject to change without notice.
© 03/2008
AVT 1394 accessories
1394b / GOF PCI Express adapter
Applications up to 500 m Glass optical fiber
Pike with built-in GOF port Remote power supply
AVT GOF hub
Legacy cabling Remote power supply
The total video bandwidth of the latter configuration is limited to 32 MByte/s due to the fact that the bus switches to 1394a speed. Ordering information: FWB1GLC-PCIE10
2x 1394b & GOF (DUPLEX LC) to PCI-Express Host Adapter, industrial
K0000349
62.5/125 µm, LCLC connector, indoor 10 m 62.5/125 µm, LCLC connector, indoor 30 m 62.5/125 µm, LCLC connector, indoor 50 m 62.5/125 µm, LCLC connector, indoor 100 m 62.5/125 µm, LCLC connector, indoor 150 m 62.5/125 µm, LCLC connector, indoor 200 m 62.5/125 µm, LCLC connector, indoor 300 m 62.5/125 µm, LCLC connector, indoor 400 m
K1200095 K1200087 K1200085 K1200086 K1200088 on request on request on request
IEEE 1394b; 2x screw lock, 0.5 m, black, 2x ferrite IEEE 1394b; 2x screw lock, 5.0 m, black, 2x ferrite IEEE 1394b; 2x screw lock, 7.5 m, black, 2x ferrite IEEE 1394b/a; 9-pin (screw lock) / 6-pin (latch), 4.5 m
K1200201 K1200133 K1200134 K1200171
Cable options: GOF cable GOF cable GOF cable GOF cable GOF cable GOF cable GOF cable GOF cable Cable Cable Cable Cable
10 m for optical repeater 30 m for optical repeater 50 m for optical repeater 100 m for optical repeater 150 m for optical repeater 200 m for optical repeater 300 m for optical repeater 400 m for optical repeater
0.5 m 9-pin 5.0 m 9-pin 7.5 m 9-pin 4.5 m 9-pin
- 9-pin, industrial - 9-pin, industrial - 9 pin, industrial - 6-pin, industrial
Notes: Remote power supply needed either at camera or remote device. GOF cables with higher mechanical grades: Available upon request. Different locking cables available upon request.
ALLIED VISION TECHNOLOGIES GMBH Taschenweg 2a | D-07646 Stadtroda | Germany Phone: +49 36428/677-0 | Fax: +49 36428/677-24 www.alliedvisiontec.com | info@alliedvisiontec.com
Design and specification of the described product(s) are subject to change without notice.
© 03/2008
AVT 1394 accessories
1394a dual bus PCI Express adapter
1394
FWX2-PCIE10
Your 1394a dual bus PCI Express adapter with two or four ports. IOI’s dual 1394a bus PCI Express adapter with either two or four 1394a connectors offers users the ability to directly connect up to four cameras of its long range of 1394a cameras to their PC in a very simple way. Compared to single 1394a bus per card solutions, users save one slot in their system. PCI Express bandwidth of up to 250 MByte/s 1 ensures low latency transmission of the up to 2x 32 = 64 MByte/s of video data at full speed from AVT’s Marlin, Dolphin, Guppy and Oscar cameras.
Highlights z Up to 2x 32 = 64 MByte/s bus video bandwidth z Compatible with IEEE 1394a (2000) z Easy plug & play, no driver required z Compatible with all AVT 1394a cameras z Compatible with all AVT Software Packages z Power in connector to supply power z Clamp locking for 1394a dual port possible
2
1
Practical bandwidth is lower and dependent on individual systems/software conditions. Mega = 1.000.000
ALLIED VISION TECHNOLOGIES GMBH Taschenweg 2a | D-07646 Stadtroda | Germany Phone: +49 36428/677-0 | Fax: +49 36428/677-24 www.alliedvisiontec.com | info@alliedvisiontec.com
For details refer to the corresponding releases
2
AVT 1394 accessories
1394a dual bus PCI Express adapter
Technical Specifications Feature Adapter type PCI Express chipset 1394 chipset Interface Ports Speed Bandwidth # cameras (DMA’s) OS support Compliance Power Operating temp. Dimensions Mass External power in Options: cables
Description Two/four port dual 1394a bus card with PCI Express interface PLX Technologies: PEX8111-BB66BC 2x TI TSB43AB22A (integrated link/phy) PCI Express, 1 lane 2x or 4x 1394a, supplying bus power (max. 1350 mA) per port 100, 200, 400, Mbps transfer rate 2x 50/40/32 MByte/s at 400 Mbps (gross/net/video) up to 2x 4 (External hubs for more than 4 required) Windows NT4.0, 2000 (FP); XP, 2003; Linux 2.4.x/2.6.x (on request) FCC, CE, RoHS Directive (2002/95/EC), WEEE Directive (2002/96/EC) 12 V – 32 V DC, supplying bus power, max. 1500 mA +5°C… 50°C 110 mm x 120 mm 75 g 13 V – 32 V DC (big IDE 4-pin cable adapter included) copper cables various lengths, with or without clamp locking at both sides, sold separately
Ordering information: FWX2-PCIE10-2 FWX2-PCIE10-4
Dual OHCI FireWire (2x IEEE 1394a) to PCI Express Host Adapters Dual OHCI FireWire (4x IEEE 1394a) to PCI Express Host Adapters
K0000344 K0000345
Cable options: Cable -2x Interlock Cable -2x Interlock Cable -2x Interlock Cable -2x Interlock Cable -1x Interlock Cable -1x Interlock Cable -1x Interlock Cable -1x Interlock Cable -1x Interlock
IEEE1394a; (2x IEEE1394a; (2x IEEE1394a; (2x IEEE1394a; (2x IEEE1394a; (1x IEEE1394a; (1x IEEE1394a; (1x IEEE1394a; (1x IEEE1394a; (1x
Interlock) 4.5 m, for Marlin / Oscar / Guppy Interlock) 10 m, for Marlin / Oscar / Guppy Interlock) 12.5 m, for Marlin / Oscar / Guppy Interlock) 17.5 m, for Marlin / Oscar / Guppy Interlock) 3.0 m, for Marlin / Oscar / Guppy Interlock) 4.5 m, for Marlin / Oscar / Guppy Interlock) 6.0 m, for Marlin / Oscar / Guppy Interlock) 7,5 m, for Marlin / Oscar / Guppy Interlock) 10 m, for Marlin / Oscar / Guppy
K1200064 K1200163 K1200165 K1200162 K1200167 K1200091 K1200160 K1200212 K1200159
Notes: Cable locking at card side is not possible with four port card due to narrow spacing of ports (use 1x Interlock). Cable locking at card side is possible with two port card. (use 2x Interlock ). Molex clamp locking (aka Interlock) is suitable for AVT Marlin, Guppy, Oscar. Please consult AVT or your local dealer if you require locking connector for Dolphin or third party cameras.
ALLIED VISION TECHNOLOGIES GMBH Taschenweg 2a | D-07646 Stadtroda | Germany Phone: +49 36428/677-0 | Fax: +49 36428/677-24 www.alliedvisiontec.com | info@alliedvisiontec.com
Design and specification of the described product(s) are subject to change without notice.
© 03/2008
AVT 1394 accessories
1394a adapter PCI Express
FW-PCIE1x20
Your 1394a adapter for the PCI Express bus. IOI FW-PCIE1x20 PCI Express adapter offers users the ability to connect AVT’s broad 1394a camera range into their PC in a very simple way. PCI Express bandwidth of up to 250 MByte/s1 ensures low latency transmission of the up to 32 MByte/s of video data at full speed from AVT’s camera range. Two 1394a external connectors for the direct connection of AVT’s Marlin, Guppy or Oscar cameras make this universal interface card ideal for most modern PC’s. It also offers the possibility to use interlock cable.
Highlights z Fully compliant with PCI Express z Supports one-lane 2.5 Gbit/s PCI Express
specification z 250 MByte/s PCI express transfer bandwidth z Compliant with IEEE 1394a (2000) z 1394a data transfer rate up to 400 Mbit/s z Easy plug & play z Supports Windows OS; Linux OS and Mac OS z Compatible with AVT’s 1394a camera families z No extra driver needed for
- AVT FirePackage - AVT Fire4Linux (on request) - AVT Direct FirePackage 1
Practical bandwidth is lower and dependent on individual systems/software conditions. Mega = 1.000.000
ALLIED VISION TECHNOLOGIES GMBH Taschenweg 2a | D-07646 Stadtroda | Germany Phone: +49 36428/677-0 | Fax: +49 36428/677-24 www.alliedvisiontec.com | info@alliedvisiontec.com
z Additional power in connector to supply extra
power for multi camera applications
AVT 1394 accessories
1394a adapter PCI Express
Technical Specifications Feature Adapter type PCI Express chipset 1394 chipset Interface Ports
Description 1394a PCI Express Host controller LSI FW533E-02 integrated in LSI FW533E-02; single OHCI PCI Express, 1 lane 2x 1394a external, supplying bus power (max. 1350 mA ) per port, but not more than 1350 mA in total 1x 1394a internal, 100, 200, 400 Mbit/s transfer rate 50/40/32 MByte/s at 400 Mbit/s (gross/net/video) up to 8 (External repeater for more than 2 required) Windows XP, 2003, Vista, 7; Linux 2.6.x; Mac OS 10.4.8 or later FCC, CE, RoHS Directive (2002/95/EC), WEEE Directive (2002/96/EC) 12 V – 36V DC, supplying bus power, max. 1350 mA +5°C… 55°C 13 V2 – 36 V DC Low profile PCIe form factor AVT FirePackage (FP), AVT Direct FirePackage (DFP), AVT Fire4Linux (on request) various lengths, with or without screw locking at camera side, sold separately
Speed Bandwidth # cameras (DMA’s) OS support Compliance Power Operating temp. External power in Dimensions Compatibility Options: cables Ordering information:
Order Key PCI Express, Adapter 1394a
PCI Express, 3x 1394a (2 external; 1xinternal) IOI FW-PCIE1x20
Please contact your local dealer for specific cable types and variants!
2
Ext. voltage must exceed internal PCI Express voltage by ≥ 0,5 V.
ALLIED VISION TECHNOLOGIES GMBH Taschenweg 2a | D-07646 Stadtroda | Germany Phone: +49 36428/677-0 | Fax: +49 36428/677-24 www.alliedvisiontec.com | info@alliedvisiontec.com
Design and specification of the described product(s) are subject to change without notice. Author: TFR © 06/2010
1470
AVT 1394 accessories
1394
1394a adapter PCI bus
FW-PCI3201
Your low profile 1394a adapter for the PCI bus. IOI’s economical low profile three port 1394a Card offers users the ability to externally connect up to two cameras of the AVT’s wide range of 1394a cameras such as Marlin, Dolphin, Guppy and Oscar with clamp locking cables to their PC in a very painless and simple way. PCI 32 Bit theoretical bandwidth1 of up to 132 MByte/s ensures low latency transmission of the up to 32 MByte/s of video data at full speed. This makes this economical interface card ideal for many space-critical applications with today’s PC’s.
Highlights z Fully compliant with PCI 2.x at 3.3V and 5V
signalling environment z Supports 33 MHz 32 bit specification z Up to 132 MByte/s PCI transfer bandwidth z Up to 32 MByte/s total 1394a bus bandwidth z Up to four cameras (DMA’s) parallel acquisition
(bandwidth sharing) z Compliant with IEEE 1394a (2000) z 1394a data transfer rate up to 400 Mbit/s z Easy plug & play z Suitable for clamp locking cables z Supports Windows and Linux O.S. z Compatible with all AVT 1394a cameras z Upwards compatible with AVT’s PIKE camera z Compatible with
- AVT FirePackage - Avt Fire4Linux - AVT Direct FirePackage z Additional power in connector to supply extra
power for multi camera applications 1
Practical bandwidth is lower and dependent on individual systems/software conditions; M = Mega = 1.000.000
ALLIED VISION TECHNOLOGIES GMBH Taschenweg 2a | D-07646 Stadtroda | Germany Phone: +49 36428/677-0 | Fax: +49 36428/677-24 www.alliedvisiontec.com | info@alliedvisiontec.com
AVT 1394 accessories
1394a adapter PCI bus
Technical Specifications Feature Adapter type 1394 chipset Interface Ports
Description 1394a PCI TI single chip Texas Instruments TSB43AB23 PCI 2.x 2x 1394a external 1x internal, supplying bus power (max. 1350 mA) per port, but not more than 1500 mA in total 100, 200, 400 Mbit/s transfer rate 50/40/32 MByte/s at 400 Mbit/s (gross/net/video) <= 4 Windows NT4 (FirePackage), 2000, XP, 2003, Linux 2.4.x/2.6.x FCC, CE, RoHS 8 – 36V DC, supplying bus power up to 1.5A max. 120 mm x 120 mm (80 mm x 120 mm low profile) 80 g 12 V 2 – 36 V DC (cable adapter included) +5°C … 50°C AVT FirePackage, AVT Direct FirePackage, AVT Fire4Linux various lengths, w or w/o clamp locking at either sides, sold separately
Speed Bandwidth # cameras (DMA’s) OS support Compliance Power Dimensions Mass External power in Operating temp. Compatibility Options: cables
Ordering numbers: OHCI Triple Adapter IOI-FW3201 slot bracket IOI BR-00194
PCI-card OHCI IEEE1394, 3 connectors (2 extern, 1 intern) low profile slot bracket for FW-PCI3201 (K0000361)
K0000361 K0000364
IEEE1394a; (2x IEEE1394a; (2x IEEE1394a; (2x IEEE1394a; (2x
K1200064 K1200163 K1200165 K1200162
Cable-Options: Cable -2x Interlock Cable -2x Interlock Cable -2x Interlock Cable -2x Interlock
Interlock) 4.5 m, for Marlin / Oscar / Guppy Interlock) 10 m, for Marlin / Oscar / Guppy Interlock) 12.5 m, for Marlin / Oscar / Guppy Interlock) 17.5 m, for Marlin / Oscar / Guppy
Notes: Molex clamp locking (aka Interlock) is suitable for AVT Marlin, Guppy, Oscar. Please consult AVT or your local dealer if you require locking connector for Dolphin or third party cameras.
2
Parallel wiring of PC power supply is possible, that means ext. voltage must not exceed internal PCI bus voltage due to modified circuitry.
ALLIED VISION TECHNOLOGIES GMBH Taschenweg 2a | D-07646 Stadtroda | Germany Phone: +49 36428/677-0 | Fax: +49 36428/677-24 www.alliedvisiontec.com | info@alliedvisiontec.com
Design and specification of the described product(s) are subject to change without notice. Author: HMA/GBR © 08/2007
AVT 1394 accessories
1394
1394b / GOF PCI adapter
FWB1GLC-PCI01
Your industrial 1394b PCI card with GOF port. IOI’s 32/64 bit PCI adapter with integrated GOF port offers users the ability to connect AVT’s high end cameras, especially of the Stingray and Pike family with integrated GOF port, directly to their PC in a very simple way. This solution enables very long distance applications associated with the elimination of common ground problems without the use of external hubs. The card is equipped with a high quality optical transceiver with LCLC receptacles to bridge distances up to 500 m at 800 Mbps with 50 µm/125 µm multimode fiber. PCI 32/64 Bit 1 theoretical bandwidth of up to 132/264 MByte/s ensures low latency transmission of the up to 64 MByte/s of video data at full speed from AVT’s 1394b cameras. Two additional 1394 bilingual connectors with screw locking enable the direct connection of 1394b cameras with copper interface. Marlin, Dolphin, Guppy and Oscar cameras can also be connected by the use of legacy cables. 1
Practical bandwidth is lower and dependent on individual systems/software conditions. Mega = 1.000.000
ALLIED VISION TECHNOLOGIES GMBH Taschenweg 2a | D-07646 Stadtroda | Germany Phone: +49 36428/677-0 | Fax: +49 36428/677-24 www.alliedvisiontec.com | info@alliedvisiontec.com
Highlights z Up to 64 MByte/s bus video bandwidth z B signalling eliminates common ground z Compliant with IEEE 1394b (2002) z Backward compatible with IEEE 1394a (2000) z Up to 800 Mbps @ 500 m cable length @
850 nm wavelength z GOF port Class 1 laser safety compliant z Multimode fiber 50 µm/125 µm up to
500 m or 62.5 µm/125 µm up to 200 m z Easy plug & play, no driver required z LED for optical connection on card z Compatible with all AVT 1394b cameras z Compatible with all AVT 1394a cameras by the use
of legacy cables z Compatible with all AVT Software Packages z Power in connector to supply power z Screw locking for 1394b ports
2
For details refer to the corresponding releases
2
AVT 1394 accessories
1394b / GOF PCI adapter
Technical Specifications Feature Adapter type 1394 chipset Ports
Speed Bandwidth # cameras (DMA’s) OS support Compliance Power Operating temperature Dimensions Mass External power in Options: cables
Description 1394b 32/84 bit PCI Card with LCLC GOF port TI TSB82AA2 (link); TI TSB81BA3D (phy) 2x 1394 bilingual 3 , screw locking , supplying bus power (max. 1500 mA ) per port; 1x Glass Optical Fiber (GOF) port with LCLC receptacles, removable dust protection for unused port 5 . Small form factor Gigabit optical transceiver with vertical cavity surface emitting laser (VCSEL) @ 850 nm. Supporting S800Beta/ S400Beta/ S200Beta/ S100Beta transfer modes6 100, 200, 400, 800 Mbps transfer rate 100/80/64 MByte/s at 800 Mbps (gross/net/video) up to 4 (External repeater for more than 3 required) Windows NT4.0, 2000 (FP only); XP, 2003 7 , Linux 2.4.x/2.6.x 8 FCC, CE, RoHS directive (2002/95/EC), WEEE directive (2002/96/EC), GOF-transceiver: UL 1950, class 1 laser safety compliant 12 V – 32 V DC, supplying bus power, max. 1500 mA +5°C… 50°C 165 mm x 120 mm 80 g 13 V – 32 V DC (big IDE 4-pin cable adapter included 9 ) GOF cables, various lengths and grades; copper cables various lengths, with or without screw locking at both sides, sold separately
3
Bilingual ports can either operate in 1394b or 1394a, depending on the device (cable) attached. Screw locking: Do not apply excessive force in order not to damage port or threads. There remains a gap between the connector and the plug. 5 Dust protection has to be taken off before fiber cable can be connected. 6 With a 1394a camera or a computer port connected on the electrical side, the GOF port translates to 1394b language, but a 1394a speed (S400Beta/ S200Beta/ S100Beta ), thus enabling long distance application and the elimination of the common ground. 7 DFP may require exchange of MS-driver, depending on service pack. 8 On request: Contact your local support. 9 External power is required, when connecting more than one Pike via copper per card. 4
ALLIED VISION TECHNOLOGIES GMBH Taschenweg 2a | D-07646 Stadtroda | Germany Phone: +49 36428/677-0 | Fax: +49 36428/677-24 www.alliedvisiontec.com | info@alliedvisiontec.com
Design and specification of the described product(s) are subject to change without notice.
© 03/2008
AVT 1394 accessories
1394b / GOF PCI adapter
Applications up to 500 m Glass optical fiber
Pike with built-in GOF port Remote power supply
AVT GOF hub
Legacy cabling Remote power supply
The total video bandwidth of the latter configuration is limited to 32 MByte/s due to the fact that the bus switches to 1394a speed. Ordering information: FWB1GLC-PCI01
2x 1394b & GOF (DUPLEX LC) to PCI Host Adapter, industrial
K0000348
62.5/125 µm, LCLC connector, indoor 10 m 62.5/125 µm, LCLC connector, indoor 30 m 62.5/125 µm, LCLC connector, indoor 50 m 62.5/125 µm, LCLC connector, indoor 100 m 62.5/125 µm, LCLC connector, indoor 150 m 62.5/125 µm, LCLC connector, indoor 200 m 62.5/125 µm, LCLC connector, indoor 300 m 62.5/125 µm, LCLC connector, indoor 400 m
K1200095 K1200087 K1200085 K1200086 K1200088 on request on request on request
IEEE 1394b; 2x screw lock, 0.5 m, black, 2x ferrite IEEE 1394b; 2x screw lock, 5.0 m, black, 2x ferrite IEEE 1394b; 2x screw lock, 7.5 m, black, 2x ferrite IEEE 1394b/a; 9-pin (screw lock) / 6-pin (latch), 4.5 m
K1200201 K1200133 K1200134 K1200171
Cable options: GOF cable GOF cable GOF cable GOF cable GOF cable GOF cable GOF cable GOF cable Cable Cable Cable Cable
10 m for optical repeater 30 m for optical repeater 50 m for optical repeater 100 m for optical repeater 150 m for optical repeater 200 m for optical repeater 300 m for optical repeater 400 m for optical repeater
0.5 m 9-pin 5.0 m 9-pin 7.5 m 9-pin 4.5 m 9-pin
- 9-pin, industrial - 9-pin, industrial - 9 pin, industrial - 6-pin, industrial
Notes: Remote power supply needed either at camera or remote device. GOF cables with higher mechanical grades: Available upon request. Different locking cables available upon request.
ALLIED VISION TECHNOLOGIES GMBH Taschenweg 2a | D-07646 Stadtroda | Germany Phone: +49 36428/677-0 | Fax: +49 36428/677-24 www.alliedvisiontec.com | info@alliedvisiontec.com
Design and specification of the described product(s) are subject to change without notice.
© 03/2008
AVT 1394 accessories
1394b adapter PCI bus
1394
FWB-PCI02
Your industrial 1394b adapter for the PCI bus. IOI’s FWB-PCI02 adapter offers users the ability to securely connect AVT’s high end cameras, especially of the PIKE family, into their PC in a very simple way. PCI 32/64 Bit theoretical bandwidth 1 of up to 132/264 MByte/s ensures low latency transmission of up to 64 MByte/s of video data at full speed from AVT’s Stingray or Pike cameras. Two 1394 bilingual connectors with screw locking allow the direct connection of two 1394b cameras. 1394a devices such as AVT’s Marlin, Dolphin, Guppy or Oscar family of cameras can be connected as well due to legacy cables converting from 9-pin to 6-pin connectors. This makes this two port interface adapter ideal for multi camera applications with today’s PCI-expansion-slot PCs.
Highlights z Fully compliant with PCI 2.x at 3.3 V and
5 V signalling environment z Supports 33 MHz 32/64 bit specification z Up to 132/264 MByte/s transfer bandwidth z Up to four cameras (DMA’s) parallel acquisition
(bandwidth sharing) z Compliant with IEEE 1394b (2002) and backward
compatible with IEEE1394a (2000) z 1394b data transfer rate up to 800 Mbps z Easy plug & play z Supports Windows and Linux z Compatible with all AVT 1394b cameras z Backward compatible with all AVT 1394a cameras z Compatible with all AVT Software Packages
2
z Additional power in connector to supply extra
power for multi camera applications 1
Practical bandwidth is lower and dependent on individual systems/software conditions. Mega = 1.000.000
ALLIED VISION TECHNOLOGIES GMBH Taschenweg 2a | D-07646 Stadtroda | Germany Phone: +49 36428/677-0 | Fax: +49 36428/677-24 www.alliedvisiontec.com | info@alliedvisiontec.com
2
For details refer to the corresponding releases
AVT 1394 accessories
1394b adapter PCI bus
Technical Specifications Feature Adapter type 1394 chipset Ports Speed Bandwidth # cameras (DMA’s) OS Support Compliance Power Operating temp. Dimensions Mass External power in Options: Cables
Description 1394b PCI Card TI TSB82AA2 (link); TI TSB81BA3 (phy) 2x 1394 bilingual 3 , screw locking 4 , supplying bus power (max. 1500 mA ) per port; 100, 200, 400, 800 Mbps transfer rate 100/80/64 MByte/s at 800 Mbps (gross/net/video) up to 4 (External repeater for more than 3 required) Windows NT4.0, 2000 (FP only); XP, 2003 5 , Linux 2.4.x/2.6.x 6 FCC, CE, RoHS Directive (2002/95/EC), WEEE Directive (2002/96/EC) 12 V – 32 V DC, supplying bus power, max. 1500 mA +5°C… 50°C 165 mm x 120 mm 80 g 13 V – 32 V DC (big IDE 4-pin cable adapter included) 7 GOF cables, various lengths and grades; copper cables various lengths, with or without screw locking at both sides, sold separately
Ordering information: PCI Adapter 1394b
2-port OHCI IEEE-1394b to PCI Host Adapter, industrial
K0000347
IEEE 1394b; 2x screw lock, 0.5 m, black, 2x ferrite IEEE 1394b; 2x screw lock, 5.0 m, black, 2x ferrite IEEE 1394b; 2x screw lock, 7.5 m, black, 2x ferrite IEEE 1394b/a; 9-pin (screw lock)/6-pin (latch), 0.5 m IEEE 1394b/a; 9-pin (screw lock)/6-pin (latch), 4.5 m
K1200201 K1200133 K1200134 K1200198 K1200171
Cable options: Cable Cable Cable Cable Cable
0.5 m 9-pin 5.0 m 9-pin 7.5 m 9-pin 0.5 m 9-pin 4.5 m 9-pin
- 9-pin, industrial - 9-pin, industrial - 9 pin, industrial - 6-pin, industrial - 6-pin, industrial
Notes: Different locking cables available upon request.
3
Bilingual ports can either operate in 1394b or 1394a, depending on the device (cable) attached. Screw locking: Do not apply excessive force in order not to damage port or threads. There remains a gap between the connector and the plug. 5 DFP may require exchange of MS-driver, depending on service pack. 6 On request: Contact your local support. 7 External power is required, when connecting more than one 1394b camera per card. 4
ALLIED VISION TECHNOLOGIES GMBH Taschenweg 2a | D-07646 Stadtroda | Germany Phone: +49 36428/677-0 | Fax: +49 36428/677-24 www.alliedvisiontec.com | info@alliedvisiontec.com
Design and specification of the described product(s) are subject to change without notice.
© 03/2008
AVT 1394 accessories
1394a adapter PCI bus
1394
4601-22
Your quad port dual 1394a adapter for the PCI bus. IOI’s quad port dual 1394a adapter offers users the ability to directly connect up to four cameras of the AVT’s long range of 1394a cameras such as Marlin, Dolphin, Guppy and Oscar to their PC in a very simple way. PCI 32 Bit theoretical bandwidth 1 of up to 132 MByte/s ensures low latency transmission of up to 2x 32 = 64 MByte/s of video data at full speed from multiple cameras. Two 1394a connectors per bus allow the direct connection of up to four 1394a cameras to this adapter. This makes this universal interface card ideal for high speed multi camera applications with today’s PC’s.
Highlights z Fully compliant with PCI 2.x at 3.3 V and
5 V signalling environment z Supports 33 MHz 32 bit specification z Up to 132 MByte/s PCI transfer bandwidth z Up to 64 MByte/s 1394a video bus bandwidth z Two separate 1394a buses on one adapter z Two ports per bus z Up to eight cameras (DMA’s) parallel acquisition
(bandwidth sharing) z Compliant with IEEE 1394a (2000) z 1394a data transfer rate up to 400 Mbit/s z Easy plug & play z Supports Windows and Linux z Compatible with all AVT 1394a cameras z Upwards compatible with AVT PIKE camera
(@ 400 Mbit/s) z Compatible with
- AVT FirePackage - AVT Fire4Linux (on request) - AVT Direct FirePackage z Additional power in connector to supply extra 1
Practical bandwidth is lower and dependent on individual systems/software conditions
ALLIED VISION TECHNOLOGIES GMBH Taschenweg 2a | D-07646 Stadtroda | Germany Phone: +49 36428/677-0 | Fax: +49 36428/677-24 www.alliedvisiontec.com | info@alliedvisiontec.com
power for multi camera applications
AVT 1394 accessories
1394a adapter PCI bus
Technical Specifications Feature Adapter type 1394 chipset Interface # buses Ports Speed Bandwidth # cameras (DMA’s) OS Support Compliance Power Dimensions Mass External power in Operating temp. Compatibility Options: cables
Description Dual 1394a PCI 2x Ti TSB43AB21 (Integrated link/phy) PCI 2.x 2x 1394a bus 4x 1394a, supplying bus power (max. 1350 mA), but not more than 1500 mA in total 100, 200, 400 Mbit/s transfer rate 50/40/32 MByte/s at 400 Mbit/s (gross/net/video) per bus up to 8 (External repeater for more than 4 cameras required) Windows NT4.0, 2000, XP, 2003, Linux 2.4.x/2.6.x FCC, CE 12 V – 36 V DC, supplying bus power up to 1500 mA max. 120 mm x 120 mm 80 g 13 V – 36 V DC (cable adapter included) +5°C … +50°C AVT FirePackage, AVT Direct FirePackage, AVT Fire4Linux (on request) various lengths, with or without locking on either side, sold separately
Ordering information: Dual OHCI Quad Adapter IOI-4601-22 PCI, 2 OHCI IEEE1394-buses, 4 connectors
K0000207
Cable options: Cable -1x Interlock Cable -1x Interlock Cable -1x Interlock Cable -1x Interlock Cable -1x Interlock
IEEE1394a; (1x Interlock) 3.0 m, for Marlin / Oscar / Guppy IEEE1394a; (1x Interlock) 4.5 m, for Marlin / Oscar / Guppy IEEE1394a; (1x Interlock) 6.0 m, for Marlin / Oscar / Guppy IEEE1394a; (1x Interlock) 7,5 m, for Marlin / Oscar / Guppy IEEE1394a; (1x Interlock) 10 m, for Marlin / Oscar / Guppy
Notes: Cable locking at card side is not possible due to narrow spacing of ports. Molex clamp locking (aka Interlock) is suitable for AVT Marlin, Guppy, Oscar. Please consult AVT or your local dealer if you require locking connector for Dolphin or third party cameras.
ALLIED VISION TECHNOLOGIES GMBH Taschenweg 2a | D-07646 Stadtroda | Germany Phone: +49 36428/677-0 | Fax: +49 36428/677-24 www.alliedvisiontec.com | info@alliedvisiontec.com
Design and specification of the described product(s) are subject to change without notice. Author: HMA/GBR © 08/2007
K1200167 K1200091 K1200160 K1200212 K1200159
AVT 1394 accessories
1394b quad bus PCI Express adapter
PCIe-FIW64
4 OHCI
4x 1394b ports with screw lock holes
4 OHCI PCI Express 1394b host adapter This PCI Express adapter with four external 1394b bilingual screw lock connectors is designed for high speed computer-based machine vision applications. The PCIe-FIW64 provides four IEEE 1394b ports. Each port is supported by its own OHCI bus controller. This allows connecting up to 32 AVT cameras, especially Stingray and Pike (1394b). Marlin, Guppy and Oscar cameras can also be connected by the use of legacy cables. The PCIe-FIW64 also includes four isolated programmable trigger output pulses to manage trigger events such as activating a strobe light.
ALLIED VISION TECHNOLOGIES GMBH Taschenweg 2a | D-07646 Stadtroda | Germany Phone: +49 36428/677-0 | Fax: +49 36428/677-24 www.alliedvisiontec.com | info@alliedvisiontec.com
Highlights • • • • • • • • •
4 x 1394b ports with industrial screw lock connectors 4 x 1394b OHCI bus controllers PCI Express® x4 compliant Compliant with IEEE 1394b (2002) and backward compatible with IEEE1394a (2000) 1394b data transfer rate up to 800 MBit/s Up to 32 cameras parallel acquisition (bandwidth sharing) Supports Windows Vista / XP/ XP embedded 1 Compatible with all AVT Software Packages Power-in connector to directly supply power to the 1394b bus
Digital and Trigger I/Os • Four isolated digital inputs and outputs • Four isolated trigger inputs and outputs 1
For details refer to the corresponding releases or contact your sales representative
AVT 1394 accessories
1394b quad bus PCI Express adapter
Technical Specifications Feature Adapter Type Interface Ports
Description IEEE1394a/b <- -> PCI Express x4 PCI Express 4x 1394b bilingual, supplying up to 1A bus power when externally powered1 4x100, 4x200, 4x400, 4x800 Mbit/s transfer rate 4x100/4x80/4x64 MByte/s at 800 Mbit/s (gross/net/video) Up to 32 (External hub for more than 4 required) RoHS 129.5 x 111.15 mm 60 g 12 V HDD power supply connector +0 ° … 55 °Celsius
Speed Bandwidth # cameras (DMA’s) Compliance Dimensions Weight External power in Operating temp.
Ordering information: Quad OHCI adapter 4x1394b
1
PCI Express, 4 OHCI 1394b-buses, 4x9 pol. (screw.) connector; FIW64
Inrush current per camera maybe higher than nominal power consumption
ALLIED VISION TECHNOLOGIES GMBH Taschenweg 2a | D-07646 Stadtroda | Germany Phone: +49 36428/677-0 | Fax: +49 36428/677-24 www.alliedvisiontec.com | info@alliedvisiontec.com
Design and specification of the described product(s) are subject to change without notice. author: TFR © 07/2009
Order Key K0000387