What is the Method to Fix Error 1327 Invalid Drive in Window 10? Sometimes, the error 1327 invalid drive in Window 10 occurs, if you try to install software. This error occurs when the drive is not available and the system is wrongly configured. The user can fix the issue by reconnecting the missing drive. In this blog, you will read the method to fix Error 1327 Invalid Drive in Window 10. For info, go to www.office.com/setup.
Method to Fix Error 1327 Invalid Drive in Window 10: 1. Remove Drive Letter with Command Prompt: You should visit to Search and then write cmd in the search box. After this, you should open Command Prompt. Then in the Command Prompt, you should write the below line and then tap on Enter key: subst /P (Driver Letter)
At last, you should close Command Prompt and then you should install your program. 2. Reinstall the Program: Sometimes, this error occurs if you try to install the software which was removed previously and then leftovers files of the old program will create a conflict.To fix this issue,you should fully clean the system from old or unused software. There are some tools, which scans, detect and also remove the leftovers.It is advisedyou shoulduse the best uninstaller software to fully remove each and every file linked to the app which you wish to remove and then you can reinstall the program without any issues. 3. Disconnect Network Drive: To disconnect Network Drive, you should visit to Search and then write file explorer in the search box. After this, you should open File Explorer. Here, you should visit to This PC. At this point, you should tap on ctrl + F1 altogether just to open ribbon with tools. Here under Map networking drive, you should visit to Disconnect network drive. At last, you should install your program again. 4. Reassociate Drive Letter with Temporary Location: To reassociate drive letter with Temporary location, you should launch Command Prompt as an administrator. Now, you should input subst [Driver Letter]: C:temp and then tap on Enter key. At this point, you should close Command Prompt and then reinstall the software. Here, you have to launch Command Prompt and then input the command: subst /D [Driver Letter]: to remove the software’s association with the temporary path and then press Enter key. 5. Create New User Account: To fix this issue, you should sign in to another user account and then check if the error is fixed or not. If in case, the user doesn’t have a secondary user account in their device, then you should create a new account.
With this above method, you can resolve the issue of error 1327 Invalid Drive in Window 10. If the customer needs any type of help, then you can visit to the site of MS Office via Office.com/setup or Office.com/myaccount.