Faulty fuel lift pump

Checking

Install a gauge to the outlet side of the lift pump. Turn the engine for 10 seconds.

STANDARD PRESSURE - 6 PSI (41 kPa) MINIMUM PRESSURE ACCEPTED - 3.75 PSI (26 kPa)

Removal and Installation

Turn the fuel valve at the fuel tank to the "OFF" position.

Disconnect the inlet and outlet tubelines from the lift pump. Remove the two nuts and washers that hold the lift pump to the engine block. Remove the lift pump from the engine block �. NOTE: Make sure to "Open" the fuel shut-off valve at the fuel tank after installation is completed.