“V” Belt and Tension Adjustment

Assembling Water Pump “V” Belt and Tension Adjustment

Press down here with 10kg(22lb) force

Fig.3-11

Assemble the water pump in the reverse order of disassembling, take care the cautions in Fig. 3-11.

Installing Water Pump

Install the water pump in the reverse order of removing.

NOTE: 1)Adjust the belt tension, as discribed in ‘V’Belt and tension adjustment. b)Fill the cooling system. Operate the engine and check for leaks.

Fig.3-12

1. If the belt is broken, glazed, or worn, replace the belt with a new one. If the belt is stretched so that it cannot be tightened sufficiently, install a new belt.

2. If the belt is noisy, check the tension of the belt.

Also, check for misaligned pulleys.

3. When the belt is pressed down with 10 kg (22 lb) force, the belt should deflect the specified amount.

For new belt 10~13 mm (0.4~0.5 in) For used belt 13~16 mm (0.5~0.6 in)

Daewoo D430 Engine Parts Contact: Email: EngineParts@HeavyEquipmentRestorationParts.com Phone: 269 673 1638 Website: www.HeavyEquipmentRestorationParts.com