Feeler UK Ltd a member of the
Special Offer B-800/5AX 5 Axes Double Column Machining Centre
Outstanding Quality Vertical Machining Centre Heidenhain i-TNC-530 Full 5 axes Control Rapid feed rate 60M/min X/Y/Z axes C +Feeler A axes 0.001House-Northfield degree rotary table with directCV47 drive motors UK-Rhodes Road-Southam-Warwickshire 0FG Phone: 01926 818thru 418 / spindle/15,000 Fax: 01926 818 414 / email: uk 20 Bar coolant rpm sales@feeler spindle/HSK-A63
UK Introduction Engineering Technology Group Background The Engineering Technology Group was formed in April 2005 and brought together five complimentary businesses. Being privately owned and having 50 employees. The Group comprises of the following companies –
Chiron Werke Exclusive UK distributor of Chiron, high speed, high technology machining centres.
Turning Technologies Exclusive UK distributor of Nakamura-Tome, high speed, high technology, twin spindle turning centres.
Hyfore Engineering Manufacturer of bespoke manual, hydraulic or pneumatic jigs and fixtures.
Handtmann Exclusive UK distributor of the Handtmann range of large high performance multi axis machining centres.
Feeler UK Exclusive UK distributor of the extensive Feeler range of CNC machine tools.
Why the Group was formed? Small niche distributors lack the resources necessary to meet industry challenges, while having the in-depth expertise, the ability to manage large Turnkey projects is naturally limited. Conversely large companies with a broad product portfolio do not have the in-depth expertise and suffer from increased demands for standard products and the need to maintain a fast stock turnaround. By pooling our resources the in-depth expertise from the factory trained applications engineers is enhanced and along side the factory trained service engineers the ability to provide highly innovative, precise turnkey projects is satisfied.
Feeler machine tool products are robust, reliable and represent outstanding value.
Feeler UK-Rhodes House-Northfield Road-Southam-Warwickshire CV47 0FG Phone: 01926 818 418 / Fax: 01926 818 414 / email: sales@feeler uk.com
2
UK Machine construction utilises high quality Japanese and German mechanical components, and CNC control system options include industry proven Fanuc, Heidenhain or Siemens.
Feeler UK-Rhodes House-Northfield Road-Southam-Warwickshire CV47 0FG Phone: 01926 818 418 / Fax: 01926 818 414 / email: sales@feeler uk.com
3
UK
B800-5AX
The electric cabinet is designed to be full dustproof. All cable outlet holes are equipped with fluid-resistant clamps to effectively keep moisture from entering. 15,000rpm spindle with oil cooling achieves high efficiency.
Structural parts are of a box type construction that greatly increases the machine rigidity and stability. Extra rigid column design combined with greater span between saddle slideways to enhance the extraordinary rigidity of the machine. Linear Guide Ways on 3 Axes for high speed rapid traverse.
4/5-axis with Direct Drive Motor assures high positioning accuracy and max working capacity applicable.
Internal Chip Screw Design with flushing system could move chips effectively. The control box is of an ergonomical design, which permits 0째~ 180째swiveling for added convenience of operation. Crystal Scanning Control Panel, Keys are coolant-resistant, bump-resistant, oil-resistant and changeable.
Feeler UK-Rhodes House-Northfield Road-Southam-Warwickshire CV47 0FG Phone: 01926 818 418 / Fax: 01926 818 414 / email: sales@feeler uk.com
4
UK
Specification o
Spindle speed 15,000rpm (D.D.S.) 95Nm/ with spindle oil cooler included
o Travel: 800mm(X), 500mm(Y), 500mm(Z) o
Tool magazine
50 tools (swing arm type)
o
Spindle taper shank: HSK-A63
o Rapid feedrate - X/ Y/ Z axes: 60M/m (Roller type linear guide) o 10.4" colour display for Heidenhain o
Automatic lubrication system (for slide way & ball screw)
o Pre-tensioned ballscrews on X/Y/Z axes o AC spindle motor for headstock: Fanuc: Alpha T8/15,000i
15,000rpm (11/15kw)
o AC servo motor: Heidenhain
X/Y/Z axes: QSY190C/7.2kw A axis: TMB0210-100/23.3kw (continuous) C axis: TMB0201-070/11.5kw (continuous)
o Heat exchanger o Coolant Gun o Internal double chip screw (Rear side) o Enclosed splash guard o RS-232 interface o Spindle air sealing o Dust-proof electrical cabinet o
3-colour signal light
o Rigid tapping o Door Interlock o Leveling blocks and plates o Oil-water separator o Operation and maintenance manual o CE Modifications o Transformer 60KVA/415V
Feeler UK-Rhodes House-Northfield Road-Southam-Warwickshire CV47 0FG Phone: 01926 818 418 / Fax: 01926 818 414 / email: sales@feeler uk.com
5
UK o o o o o o o o o o
Chip conveyor (right/rear side) Coolant thru spindle interface Coolant thru spindle 20 Bar / 20 Micron filtration Grundfos High Pressure Pump CH2-60 / 50HZ Rear side chip flushing system Internal double-chip screw front side Oil-water skimmer Auto power off Heidenhain linear scales for X/Y/Z axes Chiller system for 3 Axes (X/Y/Z) hollow ballscrews
------------------------------------------------------------------------------------------------------------------------------------------------TOTAL PACKAGE PRICE
Feeler UK-Rhodes House-Northfield Road-Southam-Warwickshire CV47 0FG Phone: 01926 818 418 / Fax: 01926 818 414 / email: sales@feeler uk.com
ÂŁ179,500.00
6
UK ------------------------------------------------------------------------------------------------------------------------------------------------Package Includes Delivery, offloading, positioning, full Installation and commissioning 2 Days Programmer and Operator Training Package Validity This offer is valid for a period of 30 days from the date of the proposal and is based upon a forward exchange rate of:- 1.55US$ = £1 GBP 10% of the initial deposit payment will be used to fix the exchange rate and therefore a fixed Sterling price will be guaranteed from the date the deposit is received in our account. All prices quoted are subject to Value Added Tax at the standard rate Delivery Terms Delivered to your UK works subject to the Terms and Conditions detailed below. Unloading, Positioning and Insurance Responsibility Where a machine can be offloaded using integral cranage equipment fitted to the transport vehicle and easily skated to its site position, no additional charge will be made for the lifting equipment or positioning to site. Any additional handling equipment required will be at the customer's expense. Feeler UK will insure the equipment in transit only. The unloading, lifting and positioning of the equipment from transport provided by Feeler UK to its final
osition on c position on the customer site is at the customer’s risk, and should be insured accordingly. Installation and Commissioning Responsibilities The connection of pressurised air and electrical power supply to the machine from an isolator not more than three metres from the installation point is the responsibility of the Customer. The customer will supply all glands, cabling and isolators. The machine must not be powered up until a Feeler UK engineer is present. All pressurised air supplies must be clean, dry and of adequate volume. Feeler UK can supply air dryers and receivers, if required, at an additional cost. The preparation and supply of adequate foundations and services is the responsibility of the customer. Feeler UK if requested can provide full documentation for all services and foundations. Failure to comply with the installation foundation or service requirements may result in the invalidation of the general warranty. Warranty (Notes for Guidance Only) The machine that is detailed within this Sales Offer is covered by a warranty subject to the limitations set out in conditions 7, 12 and 13 of Feeler UK’s terms and conditions of Sale (UK Sales). In the event that the equipment is found to be defective under normal operating conditions any claim shall be notified in accordance with the warranty requirements. It is a condition of the Warranty Terms that items replaced under warranty are the property of Feeler UK, and must be returned.
Feeler UK-Rhodes House-Northfield Road-Southam-Warwickshire CV47 0FG Phone: 01926 818 418 / Fax: 01926 818 414 / email: sales@feeler uk.com
7
UK it will be noted on the Feeler UK service reports if parts replaced under Warranty are taken by the Engineer or left for return by the Customer. It is the Customer’s responsibility to ensure that replaced parts are returned to Feeler UK. Any parts mis-placed or disposed of and not returned to Feeler UK will be charged at the current rate for the new component. Initial Warranty Term The initial warranty term for this machine is 12 months or, if shorter 4,000 operating hours, from delivery. Extended 2 Year Warranty Term Provided the Customer agrees to the terms of a standard Preventative Maintenance Agreement with Feeler UK run concurrently with the entire term of the Initial and Extended Warranty, then included within this Sales Order is an Extended Warranty term up to 24 months or, if shorter 8,000 operating hours, from delivery. Terms of the Preventative Maintenance Agreement will be supplied by the Engineering Services Department and must be signed by the Customer prior to the machine delivery. Terms of Payment (Notes for Guidance Only) Terms of payment are detailed in Clause 5 of Feeler UK’s Terms and Conditions of Sale (UK Sales) and are generally as follows: Deposit A non-refundable deposit of 30% of the total Contract Price plus value added tax to be paid by the buyer upon receipt of our invoice and Sales Order Confirmation. The payment of a deposit is confirmation that the contract is entered solely on the terms of this "Sales Offer" and Feeler UK’s Terms and Conditions of Sale. Balance The Buyer shall pay the balance of the Contract Price plus Value Added Tax as follows: Either:Where goods are financed through the Buyers own Banking Facilities: 65% of the total contract price plus value added tax to be paid prior to the goods being delivered to your works, or tendered for delivery. 5% of the total contract price plus value added tax to be paid on the earlier of the date of the Installation Acceptance Certificate or no later than 30 days after the date of delivery. Or Where the goods are financed through a third party Finance Company: The full balance of the contract price plus value added tax to be paid prior to the goods being delivered to your works, or tendered for delivery.
Feeler UK-Rhodes House-Northfield Road-Southam-Warwickshire CV47 0FG Phone: 01926 818 418 / Fax: 01926 818 414 / email: sales@feeler uk.com
8
UK Training Course The following training courses will be provided by Feeler UK free of charge, for a maximum of two people. Venue
Course Programmer/Operator Course
Duration
Customer Works
2 Days
The training course will be undertaken immediately following installation and commissioning of the machine, providing all relevant payments have been made up to that time. All courses must be taken within 12 months of delivery. Additional training for Operator, Programmer, and/or Maintenance staff is available at an additional daily rate of £650.00 per day, either on your site or at our Southam Training School. Training courses are limited to a maximum of two people per course. Travelling and accommodation expenses of your personnel are not included and are the responsibility of the participants. .
Service / Maintenance Contracts & Costs The Engineering Technology Group offers a number of preventative maintenance contract options and technical support
Number of full (2day) services per year
Discount on spare parts
Discount on labour charges
Annual Cost
Monthly cost
Technical helpdesk support
“Level 1” Preventative Maintenance
£1450.00
£121.00 per machine
Yes
1
10%
10%
“Level 2” Preventative Maintenance
£2100.00
£175.00 per machine
Yes
2
20%
20%
Contract Type
Prices quoted are listed rates as at 01/01/2010
Feeler UK-Rhodes House-Northfield Road-Southam-Warwickshire CV47 0FG Phone: 01926 818 418 / Fax: 01926 818 414 / email: sales@feeler uk.com
9
UK
engineeringsolutions etg’s customer support Division A team of experienced factory trained specialists
Supporting Feeler customers and machines in the field with • Experience
• Diagnostic skills & equipment
• Knowledge
• A thorough understanding of Production Engineering
Engineering • 24/7 Help Line • Regionally Based Field Engineers with access to our centrally held “live” technical information and machine histories • “Meantime to back into production from call out” running at 0.89 days • Wide range of machine care preventative maintenance & service packages • EPS Remote Diagnostics • Parts holding in our Southam Technology centre Comprehensive Range, Next day supply
Training • On your site or at our Training facility in Southam • Operator Training • Maintenance Training • Fanuc Siemens' & Heidenhain Programming Training
Applications • Team of application engineers fluent in “Catia, Delcam, Espirit & Varicut” • From full turnkey solutions to advice and programming of specific components
Feeler UK-Rhodes House-Northfield Road-Southam-Warwickshire CV47 0FG Phone: 01926 818 418 / Fax: 01926 818 414 / email: sales@feeler uk.com
10
UK
Feeler Machine Tools Division VMC Linear & Box Way
Tapping Centers
VMC Integrated Pallet Shuttle
Full Lathe Line With Automation Double Column Machines
HMC – 500
engineering technology group
Group structure engineering technology group
Exclusive UK distributor of high speed, high technology machining centres
Exclusive UK distributor of high speed, high technology, twin spindle turning centres
Supplier of Vertical, Horizontal & Turning Machines for the medium and heavy engineering industries
Supplier of Gantry machines for the Aerospace and heavy engineering industries
Workholding Solutions –Design & Manufacturer of bespoke manual, hydraulic, high pressure pneumatic jigs, and fixtures
engineering technology group
Feeler UK-Rhodes House-Northfield Road-Southam-Warwickshire CV47 0FG Phone: 01926 818 418 / Fax: 01926 818 414 / email: sales@feeler uk.com
11
engineering technology group
FEELER UK Rhodes House, Northfield Road, Southam, Warwickshire CV47 0FG TEL: 01926 818 418 / FAX: 01926 818 414 / sales@feeleruk.com www.engtechgroup.com