Industrial flooring
Introduction Innovative solutions for: •
Coating of industrial or civil floorings in cement or concrete
•
Coating and maintenance of civil or industrial coverings in bituminous sheath / ceramic and cement materials
Developed systems for: •
Very high elasticity and resistance to abrasion
•
High chemical seals
•
Perfect kept in sunlight
Coating cycles: •
Solvent based
•
Water based
•
Without solvent
•
Mixed
Range of products Primers and intermediates •
PAI-FLOOR C157 Transparent polyurethane
•
PAI-FLOOR C156 self-leveling
Finishes •
PAI-FLOOR C158
•
FINISH HS C159
•
AQUA-KOR C149
NB. In addition to polyurethane products shown here, we have a full range of epoxy products: •
Solvent free
•
Solvent based
•
Hydro dilutable
that we may present you on request
4 PAI-FLOOR C157 Description: Polyurethane hygro-hardener primer Features • • • • •
Perfect adhesion High resistance to abrasion and use-surface High chemical seals Easy to use Pot Life > 72 h
limits •
Bad resistance to light
COLORs •
Transparent
appearance •
Glossy
Application:
Drying: 4-8 hours at 20 ° C depending on the relative humidity and the humidity of the cement
Tinting system: No
pai-floor C156 Self-leveling Description: 2k polyurethane self-leveling intermediate without solvent reticulating with aromatic isocyanates Features • • • •
Perfectly smooth and distended films High thicknesses (when required) Excellent elasticity and use-surface resistance Low absorption of the finish
limits • •
Low stability to light POT-LIFE Max 40 minutes
COLORs • • •
Oxide red Grey RAL 7000, RAL 7001, RAL 7035 Green RAL 6021
Application:
Recoatability: Min 6-8 hours Max 24-36 hours at 20°C Drying: 12-24 hours at 24°C Tinting System: No
appearance •
Glossy
6 PAI-FLOOR C158 Description: Hygro-hardening polyurethane finish. Features • • • • •
Perfect adhesion High resistance to abrasion and use-surface High chemical seals Easy to use Pot Life > 72 h
limits •
Bad resistance to light
COLORs • •
Oxide red Oxide yellow
appearance •
Glossy
Application:
Drying: 4-8 hours at 20 ° C depending on the relative humidity and the humidity of the cement
Tinting system: No
FINISH HS C159 Description: Two-component polyurethane finish with solvent (high solid) reticulating with aliphatic isocyanates Features • • • •
Perfect light stability High surface hardness High resistance to abrasion High chemical seals
limits •
Not recommended for applications in poorly ventilated areas
COLORs •
RAL colors and samples
appearance •
Glossy
Application:
Recoatability: Min 2-3 hours Max 24-36 hours at 20°C Drying: 8-24 hours at 24 ° C, reticulation continues over time Tinting system: Yes
8 AQUA-KOR C149 Description: Two-component polyurethane finish reticulated with aliphatic water-based isocyanates (co-solvents <10%) Features • • •
Perfect light stability High resistance to abrasion High chemical seals
limits •
POT-LIFE 2 around 2 hours
COLORs •
RAL colors and samples
appearance •
Glossy
Application:
Recoatability: Min 3-4 hours Max 24 hours at 20°C Drying: 24-36 hours at 20°C; reticulation continues over time Tinting system: Yes
TOP application cycle - p.u.
1
Primer PAI-FLOOR C157 transparent Hydro-curing, roller or brush application
2
Intermediate PAI-FLOOR self-leveling C156 P.U. 2K, solvent free, jagged squeegee application
3
Solvent finish FINISH HS C159 or water based AQUA-KOR C149 P.U. 2K, aliphatic, roller application
Applications:
• • • • •
Internal and external flooring warehouses and civil structures Silos Garage Roofs Civil and industrial roofing
Benefits:
• • • • •
High resistance to abrasion and use-surface High elasticity Perfect stability to light and atmospheric agents Excellent drying fastness Limited environmental impact
10 application cycle for anti-dust floor
Anti-dust flooring means a surface that is easy to wash and sanitized but not subject to significant use-surface
1
PRIMER PAI-FLOOR C157 transparent Hydro-curing, roller or brush application
2
PAI-FLOOR C158 P.U hygro-hardner finish (for indoor use) alternatively, Solvent finish FINISH C159 or AQUA-KOR C149 (for outdoor use)
Application:
â&#x20AC;˘
Indoor and outdoor floors with limited passage of people and vehicles
Benefits:
â&#x20AC;˘
Excellent resistance to use-surface and abrasion in relation to the limited thickness of the coating
EPTACOAT S.r.l. Via Canzi e Colombo 20847 Albiate Tel. +39 0362 930116 Fax: +39 0362 932466 info@eptacoat.com a Business Brand by
the advanced finishing partner
EPTANOVA S.R.L. Via Alcide De Gasperi n. 3 22070 Luisago (CO), Italy Phone. +39 031 9090111 Fax +39 031 920505 info@eptanova.com
Market Companies EPTAINKS S.P.A.
EPTA CHINA Chemicals Shanghai Co. Ltd.
Via Zamenhof, 12 – 36100 Vicenza, Italy
Building A12, No.5399, Waiqingsong Road
P +39 0444 914382
Qingpu I.Z. – 201707 Shanghai, China
Fax +39 0444 918196
P +86 21 69211223 – Fax +86 21 69211311
EPTA SPAIN S.L.U.
EPTA BANGLADESH Ltd.
Can Coll, 15 – naves 22-23
Plot-45, Gulshan South Avenue, Navana Tower
08185 Lliçá de Vall – Barcelona, Spain
Shop No. 2567 (3rd Floor)
P +34 93 8439415
Dhaka PO 1212, Bangladesh
Fax +34 93 8439127
P +880 44 78440077 80 | info@eptabd.com
EPTA FRANCIA SAS
EPTA INDIA (PVT) Ltd.
42210 - Montrond-les-Bains
No.8, 5th street, Pudhu Thottam, Sheriff Colony
71 Rue De Boissieu
Tiruppur – 641 604, India
P +33 04 77 61 97 54
P +91 421 2216988 – Fax +91 421 2213225
serviceclients@eptafrancia.fr
info@eptainks.co.in
ESAPRINT LLC (OOO)
EPTA NORDIC OY
Ostashkovskaya Street 22
Palloilijantie 17
127224 Moscow, Russian Federation
90670 Oulu, Finland
P +7 495 3800278 F +7 495 6086810
P +358 442377532
info@esaprint.ru
info@eptanordic.com
EPTALAM INDÚSTRIA, COMÉRCIO, IMPORTAÇÃO E EXPORTAÇÃO DE TINTAS LTDA. Avenida New Jersey, 1030 – Galpão 01 Aruja – SP, CEP 07400-000 P +55 114652 7831 info@eptalam.com.br