Spec Sheet
Description Heaterbaum is a self-regulated Foot & Ankle Heating Pad designed for any user suffering from circulatory problems on the feet, diabetes, reynou syndrome, varicose veins, cold feet, recurring varicose veins problems, intensive care units, post- operatory, and patients suffering from distal edema caused by cardiovascular diseases. With the Heaterbaum, the user is able to effectively control the temperature of the device and match it with his/her body temperature. The Heaterbaum's temperature can be adjusted with a UL listed remote control to match the temperature of the body to the feet. There is no heating pad in the market that can operate at a fixed numeric temperature like the Heaterbaum. What can be normally found are devices that adjust to pre-fixed temperatures that are not even specified, labeled as “low,medium,high.” Almost no user is able to handle the “High” temperature setting for over five minutes. At the “low and medium” temperatures, the user commonly experiences skin irritation. The Heaterbaum was designed to help the user, while limiting these known side effects. The Heaterbaum was primarily designed to regulate and match the overall body temperature with the feet's temperature, using a high quality disposable sock that provides maximum comfort and aesthetics. The product provides precise temperature thermostat and time control limits to the assigned temperature. The Heaterbaum has been introduced as a Foot & Ankle device. Future generations of the Heaterbaum are in the design process for wrists, elbows, and/or shoulders. Future Heaterbaum products will feature heat & compression therapies at the same time.
Product Features: ● Anti-Allergy Sock, with pores to free and ventilate humidity, or body sweat. ● Covers the whole foot & ankle area. ● Pressure adjustment by use of Velcro straps. ● Temperature regulated sock. The temperature line is incorporated within the sock. It is positioned all the way from the posterior part of the ankle, reaching the heel to the sole and the fingers. ● Self-Regulated, high precision UL Thermostat for exact temperature regulation. ● This device effectively regulates the user’s desired temperature. For Example, if the user’s feet temperature is low, or 34 degrees Celsius, and his/her body temperature is the normal 37 degrees Celsius, such user is able to match the body’s temperature to that of the feet. ● This device’s temperature can be regulated in two versions, Celsius or degrees Fahrenheit. ● One-Size-Fits-All
Uses This product is a foot & ankle heating pad for any user from circulatory problems on the feet, diabetes, reynou syndrome, varicose veins, cold feet, recurring varicose veins problems, patients in intensive care units, post-operatory, recovery rooms of post-operator, and patients suffering from distal edema caused by cardiovascular diseases.
Instructions Connect to a trusted power source of 110 Volts. The cable has to be properly connected to the device. The user will hear a "beep" in the remote control of the device when the device is properly connected. This will indicate that the device is ready to be in use.
Temperature Control Unit
Hold and press the power button until the monitor is lit. This will indicate that the device is on and ready to operate. You will see two sets of numbers in the screen: The first set of numbers, in large letters, indicate the temperature in degrees celsius (We will supply each user with a conversion table from degrees celsius to degrees Fahrenheit.) In the bottom of the screen, the user will find the timer that indicates how long the device will remain in heat mode. To program the Heaterbaum's temperature and timer, press the programming or settings button. When the user presses down on the programming button, the temperature number will start blinking. Use the arrow buttons to lower or raise the temperature of the device. Once the proper temperature level is selected, press the programming button one more time to set the temperature. Once this is done, the timer option will start blinking. Use the arrow buttons once more to set the proper timer for heat therapy. The maximum heat time at once is 60 minutes. The user is able to set the timer in 5 minute intervals, with a maximum of 60 minutes at a time to avoid accidents where the user falls asleep with a higher than usual temperature. Press down on the programming button once more when the proper timer is selected. One Unit Per Box Gross Weight ( One Box Unit )
0,592 Kg
20.8 Oz
Net Weight
0,423 Kg
14.9 Oz
Patented by Ergoactives
Questions? Call Us At 800-231-6393
V2-012015