www.ict.csiro.au/persimon
Introduction to the project The CSIRO developed the electronic technology for a personal monitoring device capable of collecting heart, respiration rate and activity data. The device is a non contact system, which means unlike other
products of this nature it does not require electrodes. The CSIRO had identified that the device should contain a speaker and microphone system, a panic button, feedback indicators and be positioned correctly.
In addition to these ideas how the device should look, be worn and function, had not been explored so that it would be accepted by users.
Figure 1. Before Industrial Redesign: The first casing used for the initial trials of the device
The Role Industrial Design has Played within the Project The role industrial design has played within this project has been vital and can be summarised under the following headings. Market Analysis A market had to be realised so as to focus the design of the product so that it would meet the needs of the desired users. Therefore a market analysis was carried out which identified that seniors would be the most suitable group to target. Competitor Analysis Competitor products were investigated in relation to their style and function. They were then evaluated in comparison to PERSiMON速, so that the CSIRO monitor would be able to gain a competitive edge.
Human Factors Research In order to achieve a successful end product that would be used by seniors on a continual basis it was vital to understand their abilities, lifestyles. Therefore in-depth interviews, questionnaires and focus group sessions were carried out as well as theoretical investigation which built a clear picture of what the market required in relation to the design of the device. Conceptual Development and design Realisation As criteria for the design was built, an array of alternative concepts developed to be discussed and evaluated. Concepts are realized through, sketch, mock up models
and through 3d computer modeling. The Design Resolution The resolution for PERSiMON速 resulted in a mix of design solutions suitable for the current and future direction of the project. The design solution will require further testing and evaluation in order to ensure all needs are met.
Figure 2. Current Prototype design for PERSIMON速, the monitor on an inductive recharge mat
Figure 3. 3D Model of a concept for a
Manufacturing of the device When a final design/s is chosen the detailing and investigation of how the product will be produced into the consumer product occurs. Materials need to be investigated at this stage as well as rapid prototypes produced to test the final forms.
waterproof version of the monitor
Figure 4. One of the next generation concepts developed. A device to collect core body temperature
For further information about PERSiMON速 contact
Industrial Design by
Dr David Bishop
Megan Schembri
9372 4153
9372 4646
david.bishop@csiro.au
Megan.Schembri@csiro.au