UNIVERSAL CENTRIFUGE
Equipment
Wide Range
HERMLE L AB OR T E C HNIK
UNIVERSAL CENTRIFUGE The small, universal laboratory centrifuge offers a wide range of applications, which covers clinical laboratory requirements, research, as well as industrial laboratory use. The Z 306 offers many accessories, including rotors for microtitreplates and high speed fixed angle rotors for reaction vessels or centrifuge tubes up to 50 ml. Additionally, swing out rotors, which hold a volume of 4 x 100 ml can be used with special adapters for tissue culture tubes and also for all common blood tubes. This wide range of accessories makes the Z306 laboratory centrifuge indispensable in research laboratories and small clinical hospital laboratories.
Specifications • Maintenance-free induction drive • Microprocessor with large LCD display • Lid lock • Automatic rotor identification system with over speed protection, immediately upon rotor insertion • Active imbalance-identification and -cut off (rotor specific) • Imbalance tolerant drive • A large variety of rotors and accessories • Manufactured according to international safety regulations, i.e. IEC 61010 • Audible signal at the end of each run with several melody options • Rotor exchange is easy to handle • Noise level under 63 dBA at max. speed • Improved ventilation system keeps samples cool
Distinct Control Panel • Simple one handed operation • Easy to program with gloves on • Splash proof digital display • Permanent indication of Preset and Actual Values • Selection of speed in both rpm and g-force, with increments of 10 • 10 acceleration and 10 deceleration rates, Possibility of unbraked decelaration • Pre-selection of running time from 10 s to 99 h 59 min or continous • Storage of up to 99 runs incl. rotor type • Quick-key for short runs • Diagnostic program
Technical Data Z 306 max. speed: max RCF: max. volume: Speed range: running time:
13500 rpm 17319 xg 4 x 100 ml 200 - 13500 rpm 59 min 50 s/ 10 s increments 99 h 59 min 50 s / 1 min increments
Dimensions (w x h x d): Weight:
35,5 cm x 33 cm x 47,4 cm 30 kg
Order numbers: 310.00 V01 - Z 306, 230 V / 50 - 60 Hz / 240 W 310.00 V02 - Z 306, 120 V / 50 - 60 Hz / 300 W
Accesories Rotor/Bucket
Adapters
Order No.: 221.12 V03
Acceleration in s: 14 / 110 Decelaration in s: 19 / 250 max. Speed: 4500 rpm RCF-value: 3350 xg max. radius: 14,8 cm
Swing out rotor 4 Places Angle: 0-90° Volume
Tubes ø in mm
100 ml RB Glass 44
85 ml RB/OR 38
50 ml RB Glass 34
50 ml RB Glass 29
50 ml Falcon 29
Length min./max. (mm) Tubes per rotor Radiuscorrection (cm) Order-No.: Tube Rack
90/108 4 0,7 626.000
90/108 4 0,7 626.001
92/118 4 0,3 626.008
90/133 4 0,3 626.009
116 4 0,3 626.002
Volume
Tubes ø in mm
50 ml Rim 29
30 ml Universal 25
25 ml RB Glass 25
15 ml Falcon 17
15 ml Rim 17
15 ml 5/7 ml 1,5 ml RB Glass RB Glass Reakt. 17 13 11
4,5 ml Sarstedt 12
13
5/7ml Vakut. 13
Length min./max. (mm) Tubes per rotor Radiuscorrection (cm) Order No.: Tube rack
116 4 0,2 626.010
95/105 4 0,2 626.011
95/110 4 0,2 626.012
120 8 0,0 626.003
120 4 0,0 626.013
90/108 28 0,3 626.004
75/100 36 0,6 626.007
65/80 28 3,2 626.015
75/100 28 0,6 626.006
Order No.: 220.72 V06
Acceleration in s: 14 / 110 Deceleration in s: 17 / 170 max. Speed: 4000 rpm RCF-value: 2486 xg max. radius: 13,9 cm
Swing out rotor 4 Places Angle: 0-90° 605.000 Bucket for Tube Rack 605.002 Hermetic lid for bucket Volume
75/100 36 0,6 626.005
42 40 0,6 626.014
5/7ml
Tubes ø in mm
100 ml RB Glass 40
85 ml RB/OR 38
50 ml RB Glass 34
50 ml RB/OR 29
50 ml Falcon 29
Length min./max. (mm) Tubes oer rotor Radiuscorrection (cm) Order-No.: Tube Rack
90/108 4 0,7 705.000
90/108 4 0,7 705.012
92/118 4 0,0 705.001
90/133 4 0,0 705.010
116 4 0,3 705.006
Volume
50 ml Rim 29
30 ml Universal 25
25 ml RB Glass 25
15 ml Falcon 17
15 ml Falcon 17
15 ml Rim 17
15 ml RB Glass 17
5/7 ml 1,5 ml RB Glass Reakt. 11 13
10 ml Sarstedt 17
5/7ml
Tubes Ø in mm
13
10 ml 50ml Vakutainer Falcon 29 17
15ml Falcon 17
Length min./max. (mm) Tubes per rotor Radiuscorrection (cm) Order No.: Tube rack
116 4 0,7 705.013
75/105 4 0,3 705.014
95/110 4 0,0 705.002
120 4 0,0 705.018
120 8 0,0 1 705.005*
120 8 0,0 2 705.015*
90/108 16 0,3 705.003
75/100 28 0,6 705.007
85/100 12 0,2 705.011
75/100 16 0,6 705.008
75/100 16 0,2 705.016
120 12 0,0 605.005
42 20 0,6 705.009
116 8 0,7 605.004
*1+2 only without bucket lid
Order No.: 221.16 V03
Swing out rotor 2 x 3 Microtitreplates Angle: 0-90°
Order No.: 220.50 V08 Swing out rotor 2 x 3 Microtitreplates Angle: 0-90°
Order No.: 221.19 V02 Angle rotor 30 x 15 ml Angle: 35°
Acceleration in s: 25 / 230 Deceleration in s: 26 / 490 max. Speed: 4500 rpm RCF-Value: 2740 xg max. radius: 12,1 cm max. Loading height: 58 mm max. Loading weight: 310 g
Order No.: 706.000
Tube rack 48 x 1,5 ml (2,0 ml) Tubes
Acceleration in s: 14 / 110 Deceleration in s: 19 / 330 max. Speed: 500 rpm RCF-value: 1424 xg max. radius: 10,4 cm max. Loading height: 65 mm max. Loading weight: 310 g
Order No.: 706.000
Tube rack 48 x 1,5 ml (2,0 ml) Tubes
Acceleration in s: 19 / 157 Deceleration in s: 20 / 590 max. Speed: 4500 rpm RCF-value: 2830 xg max. radius: 12,5/10,9 cm max. Ø: 17 mm
Order No.: 701.010 701.011 701.012 701.000
Tube rack 1 x 15 ml-Glass 1 x 7 ml 1 x 5 ml (RIA) 1 x 1,5 ml
Ø (mm) 17,0 13,5 13,5 11
Length (min./max.): 95/115 95/115 70/90 42
Accessories Rotor/Bucket
Order No.: 220.96 V04
Angle rotor 12 x 15 ml Angle: 28°
Order No.: 220.87 V09
Adapters Acceleration in s: 13 / 105 Deceleration in s: 13 / 300 max. Speed: 6000 rpm RCF-value: 4180 xg max. radius: 10,4 cm max. Ø: 17 mm
Volume
15 ml Falcon
Tube ø in mm Length in mm Adapter Order No.:
17 17 120 105-125 without without
Acceleration in s: 22 / 200 Deceleration in s: 35 / 290 max. Speed: 13500 rpm RCF-value: 17319 xg max. radius: 8,5 cm max. Ø: 11 mm
Order No.:
Acceleration in s: 25 / 200 Deceleration in s: 35 / 340 max. Speed: 13500 rpm RCF-value: 17319 xg max. radius: 8,5 cm max. Ø: 11 mm
Order No.:
without Adapter without Adapter
704.005 704.004
15 ml
15 ml
7 ml
5 ml
1,5 ml
17 95-105 701.010
13 95-115 701.011
13 70-95 701.012
11 42 701.000
Tube rack 1 x 2,0 ml 1 x 1,5 ml 1 x 0,5 ml 1 x 0,4/0,2 ml PCR
Ø (mm) 11 11 8 6
Length (min./max.): 40 40 45 45
Tube rack 1 x 2,0 ml 1 x 1,5 ml 1 x 0,5 ml 1 x 0,4/0,2 ml PCR
Ø (mm) 11 11 8 6
Length(min./max.): 40 40 45 45
Angle rotor 24 x 1,5 / 2,0 ml Angle: 45°
Order No.: 220.87 V10
without Adapter without Adapter
704.005 704.004
Angle rotor 24 x 1,5 / 2,0 ml Angle: 45° | hermetically sealed
Order No.: 220.97 V04
Angle rotor 6 x 50 ml Angle: 28°
Order No.: 221.17 V03
Acceleration in s: 13 / 105 Deceleration in s: 13 / 300 max. Speed: 6000 rpm RCF-Value: 3820 xg max. radius: 9,5 cm max. Ø: 30 mm
Acceleration in s: 27 / 250 Deceleration in s: 34 / 450 max. Speed: 12000 rpm RCF-value: 15133 xg max. radius: 9,4 cm max. Ø: 11 mm
Volume
50 ml Falcon
Ø Tube in mm Length in mm Adapter Order No.:
30 17 120 120-125 without 603.001
Order No.: without Adapter without Adapter
704.005 704.004
15 ml Falcon
15 ml
17 95-105 701.010
Tube rack 1 x 2,0 ml 1 x 1,5 ml 1 x 0,5 ml 1 x 0,4/0,2 ml PCR
Ø (mm) 11 11 8 6
Length (min./max.): 40 40 45 45
Angle rotor 30 x 1,5 / 2,0 ml Angle: 45° | hermetically sealed
HERMLE L ABORT ECHNIK
More from HERMLE:
HERMLE Labortechnik GmbH Siemensstraße 25 78564 Wehingen • Germany
Refrigerated High Speed Centrifuge
Phone: + 49 7426/9622-50 Telefax: + 49 7426/9622-49
Max. Speed 20000 rpm Max. Volume 4 x 100 ml
E-Mail: vertrieb@hermle-labortechnik.de Web: www.hermle-labortechnik.de
Equipment Wide Range www.prowerb64.de
Wir behalten uns technische Änderungen vor. V 11/11
UNIVERSAL CENTRIFUGES +
CONFORM
Universal
Equipment
HERMLE L AB OR T E C HNIK
Universal Centrifuges
+
Both the table top centrifuge Z 326 and the refrigerated table top centrifuge Z 326 K offer a wide assortment of rotor options, making them ideal for a wide variety of research applications. Rotor exchange between swing out, micro, or high volume angled rotors is very simple and can take place in a matter of seconds. The Z 326 K includes the refrigeration system on the back side of the unit, optimized for the lab bench at only 40cm wide.
Specifications • Maintenance-free induction drive • Microprocessor with large LCD display • Motor driven lid lock • Automatic rotor identification system with over speed protection, immediately upon rotor insertion • Active imbalance-identification and -cut off (rotor specific) • Imbalance tolerant drive • CFC free refrigeration system • A large variety of rotors and accessories • Manufactured according to international safety regulations, i.e. IEC 61010 • Audible signal at the end of each run with several melody options • Rotor exchange is easy to handle • Noise level under 60 dBA at max. speed • Optimized airflow system keeps the samples cool (Z 326)
Distinct Control Panel • Simple one handed operation • Easy to program with gloves on • Splash proof digital display • Permanent indication of Preset and Actual Values • Selection of speed in both rpm and g-force, with increments of 10 • 10 acceleration and 10 deceleration rates, Possibility of unbraked decelaration • Preselection of the temperature from - 20°C to 40°C with 1°C increments • Indication of the sample temperature • Pre-cooling program option • Standstill cooling • Pre-selection of running time from 10 s to 99h 59min or continous • Storage of up to 99 incl. rotor type • Quick-key for short runs • Diagnostic program
Technical data Z 326
Technical data Z 326 K
max. speed: max RCF: max. volume: Speed range: Running Time:
max. speed: max RCF: max. volume: Speed range: Running Time:
Dimensions (w x h x d): Weight: Power input:
18000 rpm 23545 xg 4 x 100 ml 200 - 18000 rpm 99 h 59 min / 59 min 50 s in 1 min / 10 s increments 40 cm x 36 cm x 48 cm 43 kg 455 W
Bestellnummern: 312.00 V01 - Z 326, 230 V / 50 - 60 Hz 312.00 V02 - Z 326, 120 V / 50 - 60 Hz
Dimensions (w x h x d): Weight: Power input:
18000 rpm 23545 xg 4 x 100 ml 200 - 18000 rpm 99 h 59 min / 59 min 50 s in 1 min / 10 s increments 40 cm x 36 cm x 70 cm 60 kg 660 W
Order numbers: 311.00 V01 - Z 326K, 230 V / 50 - 60 Hz 311.00 V02 - Z 326K, 120 V / 50 - 60 Hz
Accessories
+ Adapters
Rotor/Bucket
Order No.: 221.12 V03
Tubes Ø in mm
100 ml RB Glass 44
85 ml RB/OR 38
50 ml RB Glass 34
50 ml RB Glass 29
50 ml Falcon 29
Length min./max. (mm) Tubes per Rotor Radiuscorrection (cm) Order-No.: Tube Rack
90/108 4 0,7 626.000
90/108 4 0,7 626.001
92/118 4 0,3 626.008
90/133 4 0,3 626.009
116 4 0,3 626.002
Volume
Acceleration in s: 15 / 100 Deceleration in s: 15 / 150 max. Speed: 4500 rpm RCF-value: 3350 xg max. radius: 14,8 cm Temp. at max. Speed: -7°C
Swing out rotor 4 Places Angle: 0-90°
Tubes Ø in mm
50 ml Rim 29
30 ml Universal 25
25 ml RB Glass 25
15 ml Falcon 17
15 ml Rim 17
15 ml 5/7 ml 1,5 ml RB Glass RB Glass Reakt. 17 13 11
4,5 ml Sarstedt 12
13
5/7ml Vakut. 13
Lenght min./max. (mm) Tubes per rotor Radiuscorrection (cm) Order No.: Tube rack
116 4 0,2 626.010
95/105 4 0,2 626.011
95/110 4 0,2 626.012
120 8 0,0 626.003
120 8 0,0 626.013
90/108 28 0,3 626.004
75/100 36 0,6 626.007
65/80 28 3,2 626.015
75/100 28 0,6 626.006
Order No.: 220.72 V06
Acceleration in s: 15 / 100 Deceleration in s: 15 / 150 max. Speed: 5000 rpm RCF-value: 3885 xg max. radius: 13,9 cm Temp. at max. Speed: -3°C
Volume
Swing out rotor 4 Places Angle: 0-90° 605.000 Bucket for Tube Rack
Volume
42 40 0,6 626.014
Tubes Ø in mm
100 ml RB Glass 40
85 ml RB/OR 38
50 ml RB Glass 34
50 ml RB/OR 29
50 ml Falcon 29
Length min./max. (mm) Tubes per Rotor Radiuscorrection (cm) Order-No.: Tube Rack
90/108 4 0,7 705.000
90/108 4 0,7 705.012
92/118 4 0,0 705.001
90/133 4 0,0 705.010
116 4 0,3 705.006
Volume
605.002
75/100 36 0,6 626.005
5/7ml
30 ml Universal 25
25 ml RB Glass 25
15 ml Falcon 17
15 ml Falcon 17
15 ml Rim 17
15 ml RB Glass 17
5/7 ml 1,5 ml RB Glass Reakt. 11 13
10 ml Sarstedt 17
5/7ml
Tubes Ø in mm
50 ml Rim 29
Length min./max. (mm) Tubes per rotor Radiuscorrection (cm) Order No.: Tube rack
116 4 0,7 705.013
75/105 4 0,3 705.014
95/110 4 0,0 705.002
120 4 0,0 705.018
120 8 0,0 1 705.005*
120 8 0,0 2 705.015*
90/108 16 0,3 705.003
75/100 28 0,6 705.007
85/100 12 0,2 705.011
42 20 0,6 705.009
13
10 ml 50ml Vakutainer Falcon 29 17
15ml Falcon 17
75/100 16 0,6 705.008
75/100 16 0,2 705.016
120 12 0,0 605.005
116 8 0,7 605.004
*1+2 only without bucket lid
Order No.: 221.16 V03
Swing out rotor 2 x 3 Microtitreplates Angle: 0-90°
Order No.: 221.19 V02 Angle rotor 30 x 15 ml Angle: 35°
Order No.: 220.96 V04
Angle rotor 12 x 15 ml Angle: 28°
Acceleration in s: 20 / 160 Deceleration in s: 15 / 360 max. Speed: 4500 rpm RCF-value: 2739 xg max. radius: 12,1 cm max. Loading height: 58 mm max. Loading weight: 310 g Temp. at max. Speed: -6°C
Order No.: 706.000
Tube rack 48 x 1,5 ml (2,0 ml) Tubes
Acceleration in s: 15 / 160 Deceleration in s: 10 / 380 max. Speed: 4500 rpm RCF-value: 2829/2467 xg max. radius: 12,5/10,9 cm max. Ø: 17 mm Temp. at max. Speed: -9°C
Order No.: 701.010 701.011 701.012 701.000
Tube rack 1 x 15 ml-Glas 1 x 7 ml 1 x 5 ml (RIA) 1 x 1,5 ml
Acceleration in s: 15 / 100 Deceleration in s: 10 / 160 max. Speed: 6000 rpm RCF-value: 4185 xg max. radius: 10,4 cm max. Ø: 17 mm Temp. at max. Speed: -7°C
Volume
15 ml Falcon
Tube Ø in mm Length in mm Adapter Order No.:
17 17 120 105-125 without without
15 ml
Ø (mm) 17,0 13,5 13,5 11
Lenght (min./max.): 95/115 95/115 70/90 42
15 ml
7 ml
5 ml
1,5 ml
17 95-105 701.010
13 95-115 701.011
13 70-95 701.012
11 42 701.000
Accessories
+ Adapters
Rotor/Bucket
Order No.: 220.97 V04
Angle rotor 6 x 50 ml Angle: 28°
Order No.: 220.78 V05
Angle rotor 6 x 80 ml Angle: 25°
Order No.: 221.18 V02 Angle rotor 6 x 85 ml Angle: 38°
Order No.: 221.20 V02
Angle rotor 4 x 85 ml Angle: 30°
Order No.: 221.22 V02
Angle rotor 6 x 50 ml Angle: 26°
Order No.: 221.28 V02 Angle rotor 20 x 10 ml Angle: 30°
Order No.: 221.17 V03
Angle rotor 30 x 1,5 / 2,0 ml Angle: 45° | hermetically sealed
Acceleration in s: 15 / 100 Deceleration in s: 10 / 160 max. Speed: 6000 rpm RCF-value: 3823 xg max. radius: 9,5 cm max. Ø: 30 mm Temp. at max. Speed: -8°C
Acceleration in s: 40 / 400 Deceleration in s: 40 / 960 Acceleration in s: 60 / 500 Deceleration in s: 50 / 1260 max. Speed: 11000 rpm max. Speed: 13500 rpm RCF-value: 13933 xg RCF-value: 20986 xg max. radius: 10,3 cm max. Ø: 38 mm Temp. at max. Speed: 17°C Acceleration in s: 40 / 360 Deceleration in s: 40 /1050 max. Speed: 9000 rpm RCF-value: 10414 xg max. radius: 11,5 cm max. Ø: 38 mm Temp. at max. Speed: -5°C
Volume
50 ml Falcon
Tube Ø in mm Length in mm Adapter Order No.:
30 17 120 120-125 without 603.001
Order No.: 707.001 707.002 707.003 707.004 707.014 without Adapter
707.000 707.015
Order No.: 707.001 707.002 707.003 707.004 707.014 without Adapter
707.000 707.015 Acceleration in s: 60 / 300 Deceleration in s: 40 / 820 max. Speed: 12000 rpm RCF-value: 14811 xg max. radius: 9,2 cm max. Ø: 38 mm Temp. at max. Speed: 5°C
Order No.: 707.001 707.002 707.003 707.004 707.014 without Adapter
707.000 707.015
Acceleration in s: 40 / 360 Deceleration in s: 30 / 570 max. Speed: 12000 rpm RCF-value: 13523 xg max. radius: 8,4 cm max. Ø: 29 mm Temp. at max. Speed: -5°C
Order No.: ohne Adapter
708.019 708.003 708.004
15 ml Falcon
15 ml
17 95-105 701.010
Tube rack 1 x 15 ml 1 x 30 ml 1 x 50 ml 1 x 50 ml-Falcon 1 x 15 ml-Falcon 1 x 85 ml 2 x 15 ml 1 x 16 ml
Ø (mm) 17 25 29 29 17 38 17 18
Lenght (min./max.): 103/110 90/103 105 118 120 113 95/100 103/110
Tube rack 1 x 15 ml 1 x 30 ml 1 x 50 ml 1 x 50 ml-Falcon 1 x 15 ml-Falcon 1 x 85 ml 2 x 15 ml 1 x 16 ml
Ø (mm) 17 25 29 29 17 38 17 18
Lenght (min./max.): 103/110 90/103 105 118 120 113 95/100 103/110
Tube rack 1 x 15 ml 1 x 30 ml 1 x 50 ml 1 x 50 ml-Falcon* 1 x 15 ml-Falcon* 1 x 85 ml 2 x 15 ml 1 x 16 ml *only without rotor lid
Ø (mm) 17 25 29 29 17 38 17 18
Lenght (min./max.): 103/110 90/103 105 118 120 113 95/100 103/110
Tube rack 1 x 50 ml 1 x 30 ml 1 x 16 ml 1 x 15 ml
Ø (mm) 29 25 18 17
Lenght (min./max.): 95/115 92/95 100/105 100/105
17,5
116/125
708.017
1 x 15 ml-Falcon* *only without rotor lid
Acceleration in s: 40 / 360 Deceleration in s: 30 / 570 max. Speed: 12000 rpm RCF-value: 15938 xg max. radius: 9,9 cm max. Ø: 16 mm Temp. at max. Speed: 2°C
Order No.:
Tube rack 1 x 10 ml
Ø (mm) 16
Lenght (min./max.): 80
Acceleration in s: 25 / 200 Deceleration in s: 25 / 360 Acceleration in s: 25 / 210 Deceleration in s: 30 / 360 max. Speed: 13000 rpm max. Speed: 14000 rpm RCF-value: 17760 xg RCF-value: 20598 xg max. radius: 9,4 cm max. Ø: 11 mm Temp. at max. Speed: 9°C
Order No.:
Tube rack 1 x 2,0 ml 1 x 1,5 ml 1 x 0,5 ml 1 x 0,4/0,2 ml PCR
Ø (mm) 11 11 8 6
Lenght (min./max.): 40 40 45 45
without Adapter
without Adapter without Adapter
704.005 704.004
Accessories
+ Adapters
Rotor/Bucket
Order No.: 220.87 V09
Angle rotor 24 x 1,5 / 2,0 ml Angle: 45°
Order No.: 220.87 V10
Angle rotor 24 x 1,5 / 2,0 ml Angle: 45° | hermetically sealed
Order No.: 221.23 V02
Angle rotor 12 x 1,5 / 2,0 ml Angle: 40°
Order No.: 220.88 V07 Angle rotor 44 x 1,5 / 2,0 ml Angle: 40°C
Order No.: 220.92 V06
Angle rotor 64 x 0,4 ml Angle: 40°
Order No.: 221.38 V01
Angle rotor 4 x 8-fach PCR Strips Angle: 45°
Acceleration in s: 23 / 210 Deceleration in s: 16 / 240 Acceleration in s: 25 / 230 Deceleration in s: 17 / 420 max. Speed: 14000 rpm max. Speed: 15000 rpm RCF-value: 18625 xg RCF-value: 21381 xg max. radius: 8,5 cm max. Ø: 11 mm Temp. at max. Speed: 6°C
Order No.:
Acceleration in s: 23 / 240 Deceleration in s: 16 / 240 Acceleration in s: 25 / 230 Deceleration in s: 17 / 420 max. Speed: 14000 rpm max. Speed: 15000 rpm RCF-value: 18625 xg RCF-value: 21381 xg max. radius: 8,5 cm max. Ø: 11 mm Temp. at max. Speed: 6°C
Order No.:
without Adapter without Adapter
704.005 704.004
without Adapter without Adapter
704.005 704.004
Acceleration in s: 25 / 240 Deceleration in s: 20 / 210 max. Speed: 18000 rpm RCF-value: 23545 xg max. radius: 6,5 cm max. Ø: 11 mm Temp. at max. Speed: -2°C
Order No.: 704.004
Acceleration in s: 17 / 150 Deceleration in s: 12 / 140 max. Speed: 13500 rpm RCF-value: 17115/14466 xg max. radius: 8,4/7,1 cm max. Ø: 11 mm Temp. at max. Speed: 6°C
Acceleration in s: 17 / 150 Deceleration in s: 12 / 170 max. Speed: 13500 rpm RCF-value: 16708/14059 xg max. radius: 8,2/6,9 cm max. Ø: 8 mm Temp. at max. Speed: 2°C
Acceleration in s: 16 / 130 Deceleration in s: 12 / 130 max. Speed: 15000 rpm RCF-value: 15344 xg max. radius: 6,1 cm max. Ø: 6 mm Temp. at max. Speed: -1°C
Tube rack 1 x 2,0 ml 1 x 1,5 ml 1 x 0,5 ml 1 x 0,4/0,2 ml PCR
Ø (mm) 11 11 8 6
Lenght (min./max.): 40 40 45 45
Tube rack 1 x 2,0 ml 1 x 1,5 ml 1 x 0,5 ml 1 x 0,4/0,2 ml PCR
Ø (mm) 11 11 8 6
Lenght (min./max.): 40 40 45 45
0,4 ml tubes (Ø 6 x 50 mm) set of adapters (6 pcs.)
704.005
0,5 ml tubes (Ø 8 x 32 mm) set of adapters (6 pcs.)
704.011
1,5 ml Adapter zur vollen Leistungsausnutzung (ab 20000 xg) (12 Stück)
Order No.:
Tube rack 1 x 2,0 ml 1 x 1,5 ml 1 x 0,5 ml 1 x 0,4/0,2 ml PCR
without Adapter without Adapter
704.005 704.004
Ø (mm) 11 11 8 6
Lenght (min./max.): 40 40 45 45
More from HERMLE:
CONFORM
Refrigerated High Speed Centrifuge max. Speed 20000 rpm max. Volume 4 x 100 ml
CONFORM
Compact Centrifuge max. Speed 6000 rpm max. Volume 6 x 50 ml
HERMLE L ABORT ECHNIK
HERMLE Labortechnik GmbH Siemensstraße 25 78564 Wehingen • Germany Phone: + 49 7426/9622-50 Telefax: + 49 7426/9622-49 E-Mail: vertrieb@hermle-labortechnik.de Web: www.hermle-labortechnik.de
High Speed Equipment www.prowerb64.de
Technical modification rights reserved. V 03/11
UNIVERSAL TABLE TOP CENTRIFUGE
CONFORM
Equipment
High Speed
HERMLE L AB OR T E C HNIK
Universal Table Centrifuge The universal table top centrifuge Z 366 puts new scales regarding the versatility, running features, easy handling and the design. Both, the tube capacity of 28 x 15 ml Falcon tubes and centrifugal forces up to 29068 xg, turns the table top centrifuge Z 366 into an universal high-powered centrifuge.
Specifications • Maintenance-free induction drive • Microprocessor with large LCD display • Motor driven lid lock • Automatic rotor identification system with over speed protection • Active imbalance-identification and -cut off • Imbalance tolerant drive • A large variety of rotors and accessoires • Audible signal at the end of each run with several melody options • Noise level under 60 dBA at max. speed • Manufactured according to international safety regulations, i.e. IEC 1010
Distinct Control Panel • Simple one handed operation • Easy to program with gloves on • Splash proof digital display • Permanent indication of Preset and Actual Values • Selection of speed in both rpm and g-force, with increments of 10 • 10 acceleration and 10 deceleration rates with storage of up to ninety nine runs • Direct access to parameters; no click through the program • Pre-selection of running time from 10 sec to 99h 59min or continous • Quick-key for short runs
Technical data max. speed: max RCF: max. volume: Speed range: Running Time:
20000 rpm 29068 xg 6 x 250 ml 200 - 20000 rpm 99 h 59 min / 59 min 50 sec in 1 min / 10 sec increments
HERMLE L AB OR T E C HNIK
Dimensions (w x h x d): Weight: Power input:
43 cm x 38 cm x 51 cm 52 kg 475 W
Order numbers: 301.00 V01 - Z 366, 230 V / 50 - 60 Hz 301.00 V02 - Z 366, 120 V / 50 - 60 Hz
Accessories Rotor/Bucket
Adapters
Order No.: 221.15 V02
Acceleration in sec.: 20 / 185 Deceleration in sec.: 25 / 300 max. speed: 4500 rpm RCF-value: 3780 xg max. radius: 16,7 cm
Swing out rotor 4 Places Angle: 0-90°
628.100 PC-Screwcap 250 ml
100 ml
50 ml
50 ml 29
50 ml Falcon 29
50 ml Rim 29
62
41
34
110/130 4 0,8 628.000
95/120 4 0,6 628.001
100/120 4 0,6 628.008
95/120 12 0,4 628.002
/120 12 0,3 628.005
100/120 8 0,4 628.006
25 ml
15 ml
Volume
24,5
25 ml Rim 24,5
17
Tubes Ø in mm
100/120 20 0,6 628.003
85/100 12 1,2 628.010
76/115 36 0,4 628.004
Length min./max. (mm) Tubes per Rotor Radiuscorrection (cm) Order-No.: Tube Rack.
15 ml Falcon 17
15 ml Stehrand 17
10 ml
9 ml
5-7 ml
1,6-7 ml
4-10 ml
2,6-5 ml
4-10 ml
1,5 - 2,0 ml
Volume
16
14
13
13
16
13
15
11
Tubes Ø in mm
95/120 28 0,4 628.007
100/120 28 0,6 628.011
80/100 32 0,4 628.012
76/115 36 0,4 628.004
65/120 56 0,8 628.013
75/120 40 0,8 628.014
75/100 32 0,4 628.015
65/100 40 0,8 628.014
75/100 32 0,4 628.015
38 36 1,0 628.016
Length min./max. (mm) Tubes per Rotor Radiuscorrection (cm) Order-No.: Tube Rack.
Acceleration in sec.: 20 / 180 Order-No.: Deceleration in sec.: 25 / 390 706.000 max. speed: 4500 rpm RCF-value: 2720 xg max. radius: 12 cm max. Loading height: 58 mm max. Loading weight: 310 g
Tube rack 48 x 1,5 ml (2,0 ml) Tubes
Acceleration in sec.: 15 / 110 Deceleration in sec.: 20 / 450 max. speed: 4500 rpm RCF-value: 2830 xg max. radius: 12,5 cm max. Ø: 17 mm
Tube rack 1 x 15 ml-glass 1 x 7 ml 1 x 5 ml (RIA)
Order-No.: 701.010 701.011 701.012
Order No.: 221.16 V03
Swing out rotor 2 x 3 Microtitreplates Angle: 0-90° Ø (mm) 17,5 13,5 13,5
Length (min./max.): 95/115 95/115 70/90
Order No.: 221.19 V02
Angle rotor 30 x 15 ml Angle: 35° Acceleration in sec.: 70 / 570 Deceleration in sec.: 85 / 520 max. speed: 8000 rpm RCF-value: 10017 xg max. radius: 14,0 cm max. Ø: 62 mm
Order-No.: 713.042 713.030 713.028 713.025 713.020 713.015 without Adapter
Acceleration in sec.: 60 / 500 Deceleration in sec.: 70 / 1080 max. speed: 11000 rpm RCF-value: 15556 xg max. radius: 11,5 cm max. Ø: 38 mm
Order-No.: 707.001 707.002 707.003 707.004 707.014 without Adapter
Tube rack 1 x 50 ml-Falcon 1 x 50 ml 2 x 30 ml 4 x 15 ml-Falcon 5 x 10 ml 8 x 1,5 ml 1 x 250 ml
Ø (mm) 29 29 26 17 16 11 62
Length (min./max.): 118 103 92 120 80 40 122
Order No.: 221.21 V02
Tube rack 1 x 15 ml 1 x 30 ml 1 x 50 ml 1 x 50 ml-Falcon 1 x 15 ml-Falcon 1 x 80 ml
Ø (mm) 17 25 29 29 17 38
Length (min./max.): 103/110 90/103 105 118 120 113
Order No.: 221.18 V02
Angle rotor 6 x 250 ml Angle: 28°
Angle rotor 6 x 80 ml Angle: 38°
HERMLE L AB OR T E C HNIK
Accessories Rotor/Bucket
Order No.: 221.20 V02
Adapters Acceleration in sec.: 42 / 400 Deceleration in sec.: 52 / 800 max. speed: 12000 rpm RCF-value: 14811 xg max. radius: 9,2 cm max. Ø: 38 mm
Angle rotor 4 x 80 ml Angle: 30°
Order No.: 221.22 V02
without Adapter
Acceleration in sec.: 50 / 440 Deceleration in sec.: 50 / 520 max. speed: 13000 rpm RCF-value: 15871 xg max. radius: 8,4 cm max. Ø: 29 mm
Angle rotor 6 x 50 ml Angle: 26°
Order No.: 221.28 V02
Order-No.: 707.001 707.002 707.003 707.004 707.014
Order-No.: without Adapter
708.019 708.003 708.004 708.017
Tube Racks 1 x 15 ml 1 x 30 ml 1 x 50 ml 1 x 50 ml-Falcon* 1 x 15 ml-Falcon* 1 x 80 ml *only without rotor lid
Ø (mm) 17 25 29 29 17 38
Length (min./max.): 103/110 90/103 105 118 120 113
Tube Racks 1 x 50 ml 1 x 30 ml 1 x 16 ml 1 x 15 ml
Ø (mm) 29 25 18 17
Length (min./max.): 95/115 92/95 100/105 100/105
17,5
116/125
Ø (mm) 16
Length (min./max.): 80
1 x 15 ml-Falcon* *only without rotor lid
Acceleration in sec.: 40 / 400 Order-No.: Tube Racks Deceleration in sec.: 40 / 630 without Adapter 1 x 10 ml max. speed: 12000 rpm RCF-value: 15777 xg max. radius: 9,8 cm max. Ø: 16 mm
Angle rotor 20 x 10 ml Angle: 30°
Order No.: 221.17 V03
Acceleration in sec.: 55 / 510 Order-No.: Deceleration in sec.: 55 / 340 704.004 max. speed: 15000 rpm RCF-value: 23645 xg max. radius: 9,4 cm 704.005 max. Ø: 11 mm
Angle rotor 30 x 1,5 / 2,0 ml Angle: 45°
Order No.: 221.23 V02
704.011
More from HERMLE:
704.011
0,5 ml tubes (Ø 8 x 32 mm) set of adapters (6 pcs.) 1,5 ml adapter to the full performance usage (from 20000 xg) (12 pcs.)
Acceleration in sec.: 30 / 300 Order-No.: Deceleration in sec.: 45 / 230 704.004 max. speed: 20000 rpm RCF-value: 29068 xg max. radius: 6,5 cm 704.005 max. Ø: 11 mm
Angle rotor 12 x 1,5 / 2,0 ml Angle: 40°
0,4 ml tubes (Ø 6 x 50 mm) set of adapters (6 pcs.)
0,4 ml tubes (Ø 6 x 50 mm) set of adapters (6 pcs.) 0,5 ml tubes (Ø 8 x 32 mm) set of adapters (6 pcs.) 1,5 ml adapter to the full performance usage (from 20000 xg) (12 pcs.)
HERMLE L ABORT ECHNIK
HERMLE Labortechnik GmbH Siemensstraße 25 78564 Wehingen • Germany Phone: + 49 7426/9622-50 Telefax: + 49 7426/9622-49 CONFORM
High Speed Table Top Centrifuge
E-Mail: vertrieb@hermle-labortechnik.de Web: www.hermle-labortechnik.de High Speed
Equipment www.prowerb64.de
Technical modification rights reserved. V 03/11
HERMLE L ABORT ECHNIK
Universal Centrifuges Z 400 Z 400 K Universal High Speed Centrifuges Z 383 Z 383 K
Universal Centrifuges Z 400 / Z 400 K
Centrifuges, to meet your needs • Maximum volume 1.000 ml (4 x 500 ml) • Accommodate nearly every tube size or bottle from 0.2 ml - 250 ml • Spin many tubes at once (e.g. 48 x 15 ml) • Many rotors and adapters available for both swing-out and fixed angle rotors as well as microplate rotors • Rotors are easy to exchange • Runs can be timed from 0-60 min. or continuous. Short runs can be achieved with the quick button feature. • Highly versatile centrifuge to fit your every need
Centrifuge Safety Features • Automatic rotor recognition limits rotors to their rated maximum speed • Imbalance sensor with safety shutdown mechanism • Electronic lid locking system prevents opening of lid while in usage • Manufactured in accordance to IEC 1010 regulations • Powerful CFC-free refrigeration system • Corrosion resistant stainless steel chambers • Highly durable construction provides stability during imbalance
User Friendly Operating Features • Large easy to view control panel with digital display • Control knobs for selecting Speed / RCF Running time Temperature • Digital display for pre-set or actual values • “QUICK”-button for short runs • Continuous run feature • Selectable acceleration and deceleration rates • Stand still refrigeration • Pre-set key prevents accidental change of set values
HERMLE “Standard-Control”
Universal High Speed Centrifuges Z 383 / Z 383 K
For High Speed Performance • Capacity for 4 x 500 ml at a speed of 5000 rpm • Accommodate nearly every size tube or bottle from 0.2 ml - 250 ml at high speeds • Spin many tubes at once (e.g. 48 x 15 ml) • Many rotors and adapters available for both swing-out and fixed angle rotors as well as microplate rotors • High speed microrotors up to 17.000 rpm / 26.810 x g • High speed angle rotors for 85 ml or 50 ml up to 15.000 min-1 / 25.909 x g • Rotors are easy interchangeable
Safety Features • All the same features as previously mentioned on the Z 400 and Z 400 K. Additional features include: • A motor driven lid lock which significantly reduces the force required to activate the lock
User Friendly Operating Features • Large easy to view control panel with digital display • Control knobs for selecting: Speed / RCF Running time Temperature • Digital display of both pre-set and actual values • “QUICK”-button for short runs • Radius correction feature which allows the most accurate g-value calculation by compensating for the different tube sizes and adapters • Program memory can store up to 10 complete runs • Braking can be adjusted to 10 different intensities • Pre-set key prevents accidental change of set values • Pre-cooling program option
HERMLE “Multi-Control”
Centrifuge
Z 400
Z 400 K
Z 383
Z 383 K
Output data Max. speed Max. RCF Max. volume
13.500 rpm 17.310 x g 4 x 500 ml
13.500 rpm 17.310 x g 4 x 500 ml
17.000 rpm 26.810 x g 4 x 500 ml
17.000 rpm 26.810 x g 4 x 500 ml
Technical data Drive mechanism Type of control Speed range Running time Temperature range
brushless induction drive “Multi-Control” “Standard-Control” 200-17.000 rpm / 10 rpm 250-13.500 rpm / 250 rpm 1-60 min / continuous run 1-60 min / continuous run -20 to 40o C -20 to 40o C
Dimensions in mm Unit (L/H/W) Package (L/H/W)
430 x 365 x 540 550 x 520 x 670
740 x 340 x 580 910 x 565 x 765
500 x 380 x 590 650 x 565 x 765
760 x 380 x 595 910 x 565 x 765
Weight in kg Unit Unit incl. packaging
39 45
89 104
69 80
106,5 120
Article-No. 284.00 V01 284.00 V02
287.00 V01 287.00 V02
272.00 V07 272.00 V08
270.00 V07 270.00 V08
272.98 V01
270.98 V01
272.98 V01
270.98 V01
272.98 V02
270.98 V02
272.98 V02
270.98 V02
Power consumption Voltages 230 V / 50-60 Hz 120 V / 50-60 Hz Accessories Safety chassis Height approx. 61 cm incl. centrifuge Height approx. 91 cm incl. centrifuge
HERMLE L ABORT ECHNIK HERMLE Labortechnik GmbH Siemensstrasse 25 78564 Wehingen Germany Phone + 49-74 26- 96 22-50 Fax + 49-74 26- 96 22-49 E-mail: vertrieb@hermle-labortechnik.de Internet: http://www.hermle-labortechnik.de Technical modification rights reserved.
Version 1/2008