CC14NV CC14NV (back view)
JT22CH
20
visit www.vfimagewear.com for Imagine It on-line customization
PT18NV
Reflective Striping Enhanced visibility can be critical when working in high traffic areas, on construction sites or around equipment operation. Adding reflective striping to your uniform can make a life saving difference. Select from the many trim widths, colors and placements to make your enhancements have the highest impact. These distinctive stripings can be added to most Red Kap or Bulwark garments. Flame resistant striping is also available. The garments and striping you select should depend on the end use requirements.
The following front and back images on pgs. 22-25 indicate all single reflective stripe locations for most products. With a few exceptions, stripes shown above the waist can be applied to a shirt, jacket or coverall. Stripes shown below the waist can apply to a pant, short, or coverall. The specific details of a garment, like the size of a pocket, the placement of closures, an emblem or an additional pocket, may dictate a slight change in the placement from what is shown in these images. Striping applied post-manufacturing will always go around a pocket or emblem. Pockets cannot be removed for relective trim application.
•
Stripes on a waistband will be moved up or down if the waistband has elastic sections.
•
SP24OR
See how to order reflective striping - Page 52, Line 10. 21
Reflective Striping Locations
HUF BSB
HUP AAC JWB
BSF LSC
Stripe Codes HUF STS HUB DHB BSB HUP LMB AAC BSF JWB LSC BLT PLK BLC PLC
DHB
Location Description Horizontal Upper Front Shoulder to Shoulder Horizontal Upper Back Double Horizontal Back Both Sleeves Bicep Horizontal Under Pockets Lower Mid Back All Around Coverall Both Sleeves Forearms Jacket / Coverall Waistband Long Sleeve Cuff Both Legs Thigh Pant Leg Knee Both Legs Calf Pant Leg Cuff
STS
LMB BLT PLK
BLC
PLC
22
visit www.vfimagewear.com for Imagine It on-line customization
Front Back •
• • • • • • • • • •
HUB
• • • • • • • • • • • • •
Reflective Striping Locations
LST
VTF
Stripe Codes LST FXB VTF UPV SSW
Location Description Long Sleeve Shoulder to Cuff Full X Back - OK with suspenders Vertical Front Under Pocket to Waist Side Seam to Waist
Front Back • • • •
• •
•
UPV
FXB
SSW
See reflective stripe selection in adjacent trim guide, pages 14-19. 23
Reflective Striping Locations Stripe Codes SUP
SUP
CBX SST AAS
SST
Location Description Around Waist and 2 pieces Over Shoulders Center Back X-12" stripes Short Sleeve to Hem All Around Shirt
Front Back •
•
• •
• • •
CBX SUP
AAS
ANSI Compliant Striping The stripe configurations shown here are not necessarily ANSI compliant. To provide guidance for the protection of all those exposed to the hazards of limited visibility, the American National Standards Institute, Inc. (ANSI), approved ANSI / SEA 107-2004, the American National Standard for High-Visibility Safety Apparel. ANSI / SEA 107-2004 establishes design, material, photometric and physical performance requirements, care labeling and marking rules for high visibility garments. End users should conduct a hazard assessment in order to select garments with the proper type, class and design placement for their work environment. Please refer to ANSI / SEA 107-2004 for further information.
24
visit www.vfimagewear.com for Imagine It on-line customization
Reflective Striping Locations SUS
Stripe Codes SUS SSC
Location Description Around Waist, 2 pieces Over Shoulders and 2 pieces under pockets Short Sleeve Cuff
Front Back •
•
•
•
SSC
Reflective Striping Packages Stripe CWB DBF LBF LCB LPB LPF SBF SBW SCB SPB SPF Codes Package Package Package Package Package Package Package Package Package Package Package DHB HUB HUF JWB LSC PLC SSC
See reflective stripe selection in adjacent trim guide, pages 14-19. 25
Reflective Trim: There are several color options and widths of reflective trims that can be selected for attachment to your garments. They are primarily divided into four categories: FR – Industrial Wash, FR – Home Wash, Industrial Wash, and Home Wash. Many stripe styles are available in one or more of these categories, however prices will vary depending on the trim and location selected. Please be sure to select the correct trim. The codes under each trim indicate the following: 1) the activity code 2) the VF style number, or component code 3) the width of the trim 4) the reflectivity grade Suggested Placements: For the best suggestions regarding reflective trim placements and available packages which include several locations each, see pages 22-25. These placements will accommodate any selected stripe.
For a step-by-step tutorial on our fantastic customization capability, log in to www.vfimagewear.com. You can watch a guided demonstration of the endless customization options available at your fingertips through Imagine It! 15
Reflective Trim (NOT shown actual size) FR / IL - (Flame Resistant / Industrial Laundry)
1J / EH3207 2" 8940
1B / EH5283 2" 8940
FR / HW - (Flame Resistant / Home Wash)
Y1 / EH5203 1" 8987
1N / EH5204 2" 8987
S1 / EH5215 1" 8935
S2 / EH5216 2" 8935
O1 / EH5210 1" 8986
Y3 / EH5207 2" 9587 14
Codes with red symbols indicate that the relective trims are flame resistant.
Reflective Trim (NOT shown actual size) IL - (Industrial Laundry)
1H / EH5236 1" 9920
NOT AVAILABLE
G2 / EH5225 2" 9920
1Q / EH5227 2½" 9920
OV / EH5415 1½" 9920
1K / EH5430 1½" 9920
1E / EH5435 2½" 9920
1P / EH5226 1" 9920
16
Reflective Trim (NOT shown actual size) HW - (Home Wash)
YV / EH5330 1½" 9910
GV / EH0018 1" 9910
1O / EH5224 2" 9910
18