Besam unislide

Page 1

UniSlide TECHNICAL SPECIFICATION BESAM Power Drive Technology

230 VAC 50 Hz POWER SUPPLY SOCKET OULET, 13 A (By Others)

: 2 door leaves (Bi-parting) 900 - 2800 mm

900 - 2800 mm

• Heavy duty operator with dimensions : 147 x 145 x 6000 mm • Recommended max door weight

: For Single slide 200 kgs*

: For Bi-parting

• Adjustable opening & closing force

: 100 - 240 N

CONCRETE WALL SUPPORT

147

145

: 1 door leaf (Single slide)

30

• Clear opening

Accessories

68

100 kgs/door leaf*

• Opening & closing speed: variable up to 1.4 m/s (Bi-parting) • Hold open time: 0 - 60 sec

SCREWSET

• Power supply: 100VAC -15% to 240VAC +10%; 50/60 Hz • Power consumption at standby mode: 25W

FIXED GLASS PANEL/ OTHERS COH

• Power consumption: max. 250W • Ambient temperature: -20oC to +50oC

Radar Activation Unit

Operator

12MM TEMPERED GLASS

• Relative humidity (non-condensing): 5% to 85% • Control by microprocessor that has an integral self-monitoring device which detects any interference or faulty signals in door operation and takes necessary measures to ensure a safe operation. • Fire alarm or smoke detector can interface with the system for emergency access from public entrances. • Safety can be further enhanced by incorporating a Panic break-out fitting.

FLOORGUIDE 25x25x50 mm

Manual Activation Device

8

25

FFL

20 25

Combined Motion and Presence Detection Sensor

Side Elevation Frameless Door

• Electro-mechanical locking device can be incorporated as a standard item.

50x50 M/S OR C-CHANNEL STRUCTURE SUPPORT

• Optional electronic emergency unit that automatically opens or closes the doors in the event of power failure.

147

• Optional presence detection photocell for additional safety of 6M range.

‘EXIT’ - ONE-WAY

‘AUTOMATIC’ - TWO-WAY

‘PARTIAL OPENING’

‘PERMANENT OPEN’

145

30

‘OFF’

24

• Program selector with 5 positions:

105

• Activation unit - Motion or directional detection.

PARTITION WALL

* For heavier door weight other than recommended, please refer to manufacturer for advice.

COH

ADS FRAME DOOR

Program Selector

Contacless Activation Device

ROLLER GUIDE 15X15MM

This brochure is for Illustration purpose only, actual specifications and requirements may vary.

48

Side Elevation Frame Door

Presence Detection Sensor

Access Control Wireless Push Button


Besam in brief World leading supplier of entrance solutions Global presence – local mindset Global service programme Customised applications Design and functionality A safe investment

Besam Sliding Door Operator UniSlide High performance Many of the most valuable features and innovations that characterize Besam’s strive for optimal function and performance are combined in the sliding door operator Besam UniSlide. The UniSlide can be integrated as part of Besam Automatic Door Systems but it can also be adapted to a wide range of different door and customer requirements.

Besam (Manufacturing) Pte Ltd 33 Ubi Ave 3 #03-52 VERTEX Singapore 408868 Tel: +65 6745 6228 Fax: +65 6745 7322 info@besam.com.sg www.besam.com

Easy installation With all units completely assembled in the support beam it is just as easy to install as a replacement as for new installations. Although it is very small and slim in appearance, it is entirely suitable for the heaviest duty applications. During the installation the operator is programmed to comply with the customer’s specific requirements.

Besam is a part of ASSA ABLOY. ASSA ABLOY is the world’s leading manufacturer and supplier of locking solutions, meeting tough end-user demands for safety, security and user friendliness.

An ASSA ABLOY Group company, the global leader in door opening solutions

ASSA ABLOY

ASSA ABLOY, the global leader in door opening solutions

No compromise on safety To permit safe passage between closing doors, the doors immediately reverse if an obstruction is detected, then resume their interrupted movement at low speed to check whether the obstruction has disappeared or not. If an obstruction is detected between opening doors and surrounding walls or interior fittings, the door immediately stops and then closes after a time delay. The safety can be further improved by using a Besam presence detection system. People or objects in the doorway are detected and the door is then prevented from closing until it is safe to do so.

Design The drive unit, control unit, transmission or optional emergency unit and electromechanical locking device are all assembled in the support beam. The drive unit transmits movement to the door leaves by means of a tooth belt. The door leaves with integrated or separately mounted door adaptors can be adjusted height-, length- and depth-wise. Journalled steel rollers and sliding track made of high-grade plastic give exceptionally smooth and silent operation.


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.