HX Crawler type aerial platform
Crawler Type Aerial Platform A P P L I C A T I O N
&
A T T A C H M E N T
13.9m Platform Height The Articulating Jib Mechanism 320 mm Tail swing This brings high productivity in confined quarters. Hydraulic Pilot Control Pleasant Finger-Touch Handling. Simple Maintenance. 3-Stage Telescoping Boom for Easy transport Overall machine transport length is 7.9 m, with the retracted boom. Travel Speed : 1.5 km/h Emissions Control Engine Low Noise Design Overload warning system If the load exceeds 120% of the rated load, the overload warning system works to stop normal movements, and warns of overload through the lamp and buzzer. Swing reduction gear protection device Even if the basket strikes against its swing device, this protection device protects the swing device by releasing external forces through a friction plate.
Operating panel designed for safety (Upper control panel)
Notes : Photos include optional equipment. Some of the photos in this brochuer show an unmanned machine with attachments in an operating position. These were taken for demonstration purposes only and the actions shown are not recommended under normal operating conditions.
_004OC_KA-EN117EU_HX140B.indd 1
29/03/2010 17:00:46
WORKING RANGES
1 800
Unit: mm
750
2 870
3 140
13 850
12 590
1 110
R 1 470
70 7 900
: Travel not Possible [Boom length area]
770
400 1 900
280
1 460
2 430
1 640
: Travel not Possible [Boom angle 60° area]
2 300
SPECIFICATIONS Model Maximum work platform height
mm
HX140B -2 13 900
Maximum horizontal reach
mm
12 600
Maximum allowable load Work platform turning angle Machine weight Shoe width
kg
250
degree
90 (either direction)
kg
8 170
mm
400 (rubber shoes)
Speed Boom raise/lower
s
raise 50, lower 50
Boom extend/retract
s
extend : 38, retract : 38
Swing
min-1(rpm)
Travel
km/h
Work platform turn
0.5 (0.5) high : 1.5, low : 0.9
degree/s
90 / 10
Engine Model
Kubota D1105-K2A
Type Rated flywheel horsepower
Water-cooled, 3-cylinder swirl combustion chamber type diesel engine kW/min-1(PS/rpm)
13.6 / 2 200 (12.5 / 2 200)
Service refill capacities Fuel tank
L
66
Hydraulic oil tank
L
67 These specifications are subject to change without notice. Illustrations and photos show the standard models, and may or may not include optional equipment, accessories, and all standard equipment with some differences in color and features. Before use, read and understand the Operator’s Manual for proper operation.
Hitachi Construction Machinery www.hcme.com
KA−EN117EU Printed in the Netherlands
_004OC_KA-EN117EU_HX140B.indd 2
29/03/2010 17:00:54