Whats in your Case?
•Juice Booster 2 Mobile Wall Box
•Type 2 32A 3Phase Female Vehicle Plug with 5m cable
•32A CEE Blue Power Adaptor
•13A UK Power Adaptor
•Carry Case
•3 Years Warranty
**Sold Separately
Smart
Charging
App 7kW
Additional Adaptors Available
Juice Booster 2
Adaptable and Scalable for Any Fleet Size or Purpose
Our system has been designed by fleet operators with operators, fleet manager drivers and end customers in mind. Get in touch to learn how our system can be adapted to meet your needs.
JB2 Automatic Adaptor Recognition
The Juice Connector with automatic adapter recognition is the proprietary interface for all Juice adapter plugs and extension cables. The Connecting parts are coded and therefore protected against polarity reversal. The Juice Connector has leading contacts to the earth conductor and CP (Control Pilot connection for the transmission of control signals between the electric vehicle and the charging station) this gives maximum application safety. The Plug-In connection is designed in such a way that it can also cover future functions
16A RED
| 11kW 3Phase
32A RED
| 22kW 3Phase
16A BLUE CEE | 3kW Single Phase
32A BLUE CEE | 7kW Single Phase
CEE CEE 13A UK 16A EUROKEY FEATURES
Sturdy construction
Made of aluminium, the device can withstand a wheel load of up to 3 tonnes. Fully protected against dirt and water (IP67). From +50 °C to -30 °C.
36 MONTHS
36 Months Warranty
Free replacement device
If a warranty claim is made for the JUICE BOOSTER 2, the device will be replaced free of charge.
Matching accessories
From wall brackets to safety locks and extension cables, there is an optional accessory for every charging situation.
Lightweight and compact
Weighing just under 1 kg, the JUICE BOOSTER 2 can be easily taken along on trips, and the 5 m cable allows for worry. free charging on the go.
Smart Charging App
Juice Booster 2 works with all vehicle apps
If your vehicle does not have a Smart App, we can supply a Rail Switch with Smart Life Phone App to set daily charging & metering to benefit for your low tariff rate.
Solar This charger is solar compatible
Earthing
Removes the need for an earth rod as its integrates into the RCD protection and current earthing arrangement
Product Details & Specification
Housing Dimensions Length: 280mm, Diameter: 70mm
Weight 1.0kg excluding cables, 3.2kg with cables and plugs
Power 1.4kw - 22kw AC
Rated Current 6A to 32A
Mains Voltage 230V (Single Phase) / 400V (3Phase)
Residual Current Device RCD DC 6mA, AC/DC 30mA with protective conductor monitoring
Protection Class I
IP protection rating IP67 (Protects against damaging quantities of dust and immersion in water for short periods)
Vehicle-end connector Type 2 (EN 62196) Cable length 5m
Mains-end plug Over 30 self-detecting adapters are available for domestic, industrial and EV sockets, 1.4m power cable + approx 30cm adapter
Total Cable Length Approx 5m
Temperature Range Storage: -30°C to + 60°C Operation: -30°C to + 50°C
Operating elecvation limit Up to 3,000m above sea level
Impact and drop proof Able to withstand a wheel load of 2000kg should you drive over it by mistake (the rubber casing may burst, and the housing and plug may be scratched or bent, but live components will not be exposed) Drop proof from heights up to 100cm
Colour Metallic anthracite, black rubber caps and cables
Material Anodised aluminium with rubber caps
Standards IEC 62752, IEC 62196, 61851-Mode 2, 61851 - Mode 3 (with Type 2 and Type 3c adapters) EMC, RoHS