Exam1pass
Easiest way to pass IT exams
Exam
:
HP HP0-J17
Title
:
Designing and Implementing the HP StorageWorks EVA4400
Version :
Demo
Exam1pass Help You Pass Any IT Exam
http://www.exam1pass.com
Exam1pass
Easiest way to pass IT exams
1. What does the Dynamic Capacity Management (DCM) of an EVA storage system provide? A. maximum capacity utilization to the EVA B. load balancing on the host ports of an EVA C. optimized bandwidth utilization during replication D. minimized space requirement during rebuild operation Answer: A
2. Which SMB customer business needs are best addressed by the EVA4400? A. growing budgets, high availability, rapid data growth B. shrinking budgets, disaster tolerance, rapid data growth C. easy configuration, non-stop performance, growing budgets D. ease of management, shrinking budgets, non-stop performance Answer: B
3. What can you use to provide a Fibre Channel SAN extension over an IP network in an EVA4400 CA solution? A. MPX110 IP Distance Gateway B. IP connector on the controllers C. only an 8Gb Fibre Channel switch D. any Fibre Channel switch, provided it has an extended fabric license Answer: A
4. Which EVA solution provides the best level of site disaster tolerance? A. Snapclone B. Business Copy C. Continuous Access D. Replication Solutions Manager Answer: C
5. How does the name of an uninitialized system show in Command View EVA?
Exam1pass Help You Pass Any IT Exam
http://www.exam1pass.com
Exam1pass
Easiest way to pass IT exams
A. serial number B. uninitialized system C. WWN of the storage system D. WWN of FFFF-FFFF-FFFF-FFFF Answer: C
6. What is an interconnect requirement for the EVA4400? A. The SAN switch must run at 2Gb/s or greater. B. All components in the SAN must run at 4Gb/s. C. The direct connected switch must run at 4Gb/s. D. All components in the SAN must run at 2Gb/s or greater. Answer: A
7. Where must the multipath software be installed to enable multipathing? A. on all hosts in the SAN B. on the storage system C. on the dedicated management server D. on all hosts that require multipath access to the EVA Answer: D
8. Which user group membership enables the user to access Command View EVA? A. EVA Admin B. HP Manager C. SAN Administrator D. HP Storage Admin Answer: D
9. When can you start to create the first Vdisk using Command View EVA? A. after a host is created B. after storage system initialization
Exam1pass Help You Pass Any IT Exam
http://www.exam1pass.com
Exam1pass
Easiest way to pass IT exams
C. after multipath software is activated D. during the storage system initialization Answer: B
10. When is the first disk group (default disk group) created? A. after storage system initialization B. during the initialization of the storage system C. during the installation of Command View EVA D. manually, before the system can be initialized Answer: B
11. In a best practice configuration, which host ports of the EVA4400 controller are connected to the same redundant fabric? A. ports 1 and 2 of controller 1 B. port 1 of controller 1 and port 2 of controller 2 C. port 1 of controller 1 and port 1 of controller 2 D. This depends on how the ports were configured within Command View EVA. Answer: C
12. What must you do to enable remote support from HP Services? A. You must install and configure ISEE. B. You must configure SNMP notification. C. You must configure email forwarding for EVA events. D. You must have an Internet connection to the Management Module. Answer: A
13. What is a method for upgrading the controller firmware? A. replacing the flash card on the controller B. enabling debugging mode on the serial line C. by using the web-based OCP of the Management Module
Exam1pass Help You Pass Any IT Exam
http://www.exam1pass.com
Exam1pass
Easiest way to pass IT exams
D. using the code load button on the storage system property page Answer: D
14. What is a best practice to achieve optimum performance? A. enable disk group interleaving B. create Vdisks across disk groups C. maximize the number of disks per disk group D. separate disk groups for 10000 rpm and 15000 rpm disks Answer: C
15. What is the minimum requirement to see the hardware properties of the SAN-attached storage system within Command View EVA? A. initialized storage system B. storage system connected to the SAN C. connection to the management module D. storage system connected to the SAN with a valid WWN Answer: D
Exam1pass Help You Pass Any IT Exam
http://www.exam1pass.com