Master Keypad L UT R O N
S P E C I F I C AT I O N
HWV2B-
S U B M ITT A L
Job Name Area Controlled
Location
WHite
Model No./Color HWV-2B
BEige
IVory GRay Dusty Rose
BRown
BLack
TauPe
2-Button Multifunction Keypad Use to set address
Dimensions in mm A 2.80 70 B 4.64 116 C .32 8 D 1.08 27
Dip Switches
t
LED1 Button 1 LED2 Button 2
Use to set mode
w w w w w w w
Common Button 2 Button 1 MUX MUX +15V COM
Class 2 Wiring connections from customer supplied closure Class 2 Wiring connections to HomeWorks panel or other keypads
t
t
Installation
Specifications
MOUNTING
1-gang US wallbox.
ENVIRONMENTAL
32 - 104 oF (0 - 40oC).
DESIGN
Faceplates: Molded plastic (8 std. colors listed above).
PANEL CAPACITY
32 controls max with 16 possible unique addresses. Data link: 1000' (300 m) maximum.
1. WIRE: Turn power off. Strip 1/2" (12 mm) insulation from wires in wallbox. Connect pair for low-voltage power to terminals 1 and 2. Connect twisted pair for data link to 3 and 4. 2. ADDRESS: Set the first 4 switches with unit's unique address (see back of sheet).
t
Operating Voltage: Class 2, 15VDC. Capacity: (4) #18 AWG (1.0 mm2).
t
POWER TERMINALS
Depending on switch settings, allows users to remotely perform any one of four distinct functions:
1. Mount wallbox.
3. FUNCTION: Set 5 and 6 to determine which function unit performs (see table).
2. Pull cable(s) from HomeWorks Panel or other master keypad location. Use one pair #18 for power and one pair twisted, shielded #18 - #22 for data. All wires are class 2.
Function 1
Function
1. Single-Scene Activator
BU TT ON 1 Scene 1 On
B U TT ON 2 Scene 1 Off
2. Two- Scene Activator
Scene 1 Toggle
Scene 2 Toggle
3 Raise/Lower
Raises Assigned Lights
Lowers Assigned Lights
4. Panic Mode
Security Mode Activated
Returns to Normal Operation
Lutron Electronics Co., Inc. 7200 Suter Road Coopersburg, PA 18036, USA 4/96 P/N 362-814
t
F U NC T ION
Pre-Wiring
5 6
5 6 Function 3
5 6 Function 2
5 6 Function 4
Programming
Master keypads can be programmed with Windows-based software or locally by being placed in manual programming mode.*
For additional submittal sheets, call our Hot Line and Fax-on-Demand Service at 1-800-523-9466 or visit Lutron's Website at http://www.lutron.com/resi
4. MOUNT: Push all wires in backbox and mount as shown. Restore power.
* Remote Power Modules can only be programmed to master keypads with the Windows-based software.
t
t
System Wiring**
HOMEWORKS Panel 2
To next panel (maximum 8 panels)
Master Keypad Link
5
1
5
t
1
Interpanel Link
32 controls max with 16 possible unique addresses
Master Keypad Link 1
5
1
t
HOMEWORKS Panel 1
5
32 controls max with 16 possible unique addresses
t
Master Keypad Link Class 2 Wiring 1000' MAX 1 pair #18 for power 1 Pair twisted/shielded #18 -#22 for data
t
From Previous Panel (maximum 8 panels)
* Switch position key:
Giving Master Keypads their Unique Address Set switches* like this
For this address t
Each Master Keypad 1 should have a unique system address (1-16). This identifies the keypad 2 and enables it to 3 communicate with the unit. 4 To give a Master Keypad its address, set switches 1 - 4 on the back of the 5 unit as shown at right. 6 Document your assignments by noting 7 which keypad corresponds to which address. 8
= UP;
Set switches* like this
1 2 3 4
= DOWN.
1 2 3 4 9 10 11 12 13 14 15
Warranty Lutron will, at its option, repair or replace any control that is defective in materials or manufacture within two years after the purchase. This warranty is in lieu of any other warranties, express or implied and the implied warranty of merchantability is limited to two years from purchase. This warranty does not cover the cost of installation, removal or reinstallation, or damage resulting from misuse, abuse or improper wiring or insulation. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty may last, so the above limitations and exclusions may not apply to you.
16
Š 1996 Lutron Electronics Co., Inc. Printed in U.S.A