HomeWorks®
RF DIMMERS
Designer-style: Maestro® 048-013 1a 04.16.03
HomeWorks RF Maestro Dimmers
DESCRIPTION
Indicator Lights (Dimmer Only) Dimming Rocker
HomeWorks RF Maestro Dimmers, used in both localized and optimized lighting control designs, function much like standard dimmers and switches, and have an integral microprocessor, allowing them to be incorporated into the whole-house lighting control system. Communications with the system is accomplished through radio frequency (RF). RF Maestro Dimmers are useful in locations where single circuits of lighting need to be dimmed or switched. RF Maestro Dimmers incorporate advanced features such as fade on/ fade off, slow fade off, and rapid full on. RF Maestro Dimmers include a front accessible air-gap switch for safe lamp replacement. All HomeWorks RF Maestro Dimmers can be installed in either single pole or 3-way applications. HomeWorks RF Maestro Dimmers may be used with HomeWorks Maestro Remote Dimmers to provide dimming control from up to 9 additional locations.
Tapswitch
FASSTM - Front Accessible Service Switch Dimmer
MODEL NUMBERS Dimmers HRD-6D-XX HRD-6ND-XX HRD-10D-XX HRD-10ND-XX
600 W Incandescent/MLV Dimmer 600 W Incandescent/MLV Neutral Wire Dimmer 1000 W Incandescent/MLV Dimmer 1000 W Incandescent/MLV Neutral Wire Dimmer
Remote Dimmers HD-RD-XX
Remote Dimmer
“XX” in the model number represents color/finish code.
Remote Dimmer
® JOB NAME:
JOB NUMBER:
SPECIFICATION SUBMITTAL MODEL NUMBERS:
Page
HomeWorks®
RF DIMMERS
Designer-style: Maestro® 048-013 2a 04.16.03
S P E C I F I C AT I O N S
• Uses conventional 3-way and 4-way wiring.
COLOR / FINISH CODES
Regulatory Approvals
• On a single-tap, lights fade ON or OFF.
Dimmer Color
• UL Listed.
• On a double-tap, lights go to full ON.
• CSA Certified.
• When ON, press and hold to engage long fade to OFF.
Designer Gloss Colors White (WH) Ivory (IV) Almond (AL) Light Almond (LA) Gray (GR) Brown (BR) Black (BL)
• FCC Compliant. Complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. • Industry Canada Registered. Power Operating voltage: 120/127 VAC, 50/60 Hz. Key Design Features • Green indicator lights. • Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 6100-4-2. • Tested to withstand surge voltages without damage or loss of operation,in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits. • Dimmers operate locally and do not require system control. • Power failure memory: should power be interrupted, the lights will return to their previously set level prior to the interruption when power is restored. • Multiple location dimming from Dimmer and up to 9 Remote Dimmer(s).
• Light levels can be fine-tuned by pressing and holding the dimming rocker until the desired light level is reached. • Use Lutron Designer (Claro® or Satin ColorsTM) wallplates or designer-style wallplates from other manufacturers (when using metal wallplates from other manufacturers, it is recommended that a Midnight (MN) dimmer be used). Wallplates are sold separately. • Lutron Claro and Satin Colors wallplates snap on with no visible means of attachment. • Requires a 1-gang U.S. wallbox. 3-1/2 in. (89mm) deep recommended, 2-1/4 in. (57mm) deep minimum. System Communications and Capacity • Dimmers communicate with the HomeWorks RF Processor through radio frequency (RF).
(code)
Satin Colors Matte Hot Ochre Terracotta Desert Stone Stone Limestone Blue Mist Midnight Taupe Eggshell Biscuit Snow
Finishes (HT) (OC) (TC) (DS) (ST) (LS) (BT) (MN) (TP) (ES) (BI) (SW)
• Each HomeWorks RF Processor is capable of directly controlling up to 64 RF switches or dimmers. Environment • Ambient operating temperature: 0-40°C, 32-104°F, 0-90% humidity, non-condensing. Indoor use only. Warranty • 8 Year Limited Warranty.
MOUNTING Dimmer Mounting Screws
Adapter Mounting Screws
Wallbox Dimmer Wallplate/Adapter purchased separately.
® JOB NAME:
JOB NUMBER:
SPECIFICATION SUBMITTAL MODEL NUMBERS:
Page
HomeWorks速
RF DIMMERS
Designer-style: Maestro速 048-013 3a 04.16.03
DIMENSIONS Side View
Front View Dimmer
Remote Dimmer
4-11/16 in. (119mm)
4-11/16 in. (119mm)
2-15/16 in. (75mm)
2-15/16 in. (75mm)
5/16 in. (7.6mm)
1-3/8 in. (34.8mm)
D I M M E R O P E R AT I O N
Indicator Lights (Dimmer only) Indicate light level; glow softly as night light when light is off Tapswitch Tap on/off Dimming Rocker Brighten Dim
OFF
ON
FASSTM Front Accessible Service Switch
IMPORTANT NOTICE: FASS - Front Acessible Service Switch - to replace bulb, remove power by sliding FASS switch to the left on either the Dimmer or Remote Dimmer. After replacing bulb, slide the FASS switch to the right to restore power to the dimmer.
速 JOB NAME:
JOB NUMBER:
SPECIFICATION SUBMITTAL MODEL NUMBERS:
Page
HomeWorks速
RF DIMMERS
Designer-style: Maestro速 048-013 4a 04.16.03
D I M M E R L OA D T Y P E / C A PAC I T Y HRD-6D
HRD-6ND
HRD-10D
HRD-10ND
Incandescent, Magnetic LowVoltage
Incandescent, Magnetic LowVoltage
Incandescent, Magnetic LowVoltage
Incandescent, Magnetic LowVoltage
50W/VA
10W/VA
50W/VA
10W/VA
INC
600W
600W
1000W
1000W
MLV
600VA (450W)
600VA (450W)
1000VA (800W)
1000VA (800W)
ELV
N/A
N/A
N/A
N/A
NO
YES
NO
YES
L OA D T Y P E
M I N I M U M L OA D
MAXIMUM C A PAC I T Y
NEUTRAL WIRE
GA N G I N G A N D D E R AT I N G When ganging dimmers with other dimmers or controls in the same wallbox, derating is required.
END of Gang
MIDDLE of Gang
For multi-gang installations, derate load capacities as follows: E n d of G a n g Incandescent
Model No.
500W 500W 800W 800W
HRD-6D HRD-6ND HRD-10D HRD-10ND
速 JOB NAME:
JOB NUMBER:
SPECIFICATION SUBMITTAL MODEL NUMBERS:
M LV 500VA (375W) 500VA (375W) 800VA (650W) 800VA (650W)
M i d d l e of G a n g Incandescent 400W 400W 650W 650W
M LV 400VA 400VA 650VA 650VA
(300W) (300W) (500W) (500W)
Page
HomeWorks®
RF DIMMERS
Designer-style: Maestro® 048-013 5a 04.16.03
WIRING DIAGRAMS Single Location Installation -6D, -10D
Single Location Installation with Neutral -6ND, -10ND
Dimmer Hot/Live
Black
Dimmer
Red
Hot/Live
Black
Blue
Blue
Lighting Load
Cap Off*
120/127VAC 50/60Hz
Red
Green
Lighting Load
Cap Off*
120/127VAC 50/60Hz Green
White Neutral
Neutral
*When using controls in single location installations, cut off the uninsulated portion of the control’s multi-location wire (blue wire) and cap off using one of the provided wire connectors. DO NOT connect the blue wire to any other wiring or to ground.
Multi-Location Installation1 -6D, -10D with HD-RD Hot
Black
Red
Remote Dimmer
Dimmer
Remote Dimmer Black
Red
Black
Red
Lighting Load 120/127VAC 50/60Hz
Green
Green
Blue
Blue
Green
Blue
Neutral
Multi-Location Installation with Neutral1, 2 -6ND, -10ND with HD-RD Remote Dimmer
Remote Dimmer Hot
Black
Red
Black
Red
Dimmer Black
Red
Lighting Load 120/127VAC 50/60Hz
Green
Blue
Green
Blue
Green
Blue
White Neutral
1 Up to 9 HomeWorks Maestro Remote Dimmers/Switches may be connected to the HomeWorks Wired Maestro Dimmer/Switch. Total blue wire length may be up to 250 ft. (76m).
2 Neutral wire Dimmers/Switches must be connected on the Lighting Load side of a multi-location installation.
® JOB NAME:
JOB NUMBER:
SPECIFICATION SUBMITTAL MODEL NUMBERS:
Page
HomeWorks®
RF DIMMERS
Designer-style: Maestro® 048-013 6a 04.16.03
Home A: 2500 sq. ft. (232m2) or less - all RF devices within 30 ft. (9m) of RF Processor SY S T E M C O M M U N I C AT I O N N OT E S
RF Tabletop Keypad
RF Maestro Dimmer
• RF Dimmers must be located within 30 feet (9m) of an RF Signal Repeater or an RF Processor. Multiple repeaters may be necessary to provide adequate coverage. • RF Dimmers cannot be controlled by the system until the dimmer is addressed and programmed. See the HomeWorks Utility online help.
RF Keypad * Start
#
P/N 292 292-153 153
30 feet (9m) maximum RF Processor Home B: 2500 sq. ft. (232m2) or greater - some RF devices more than 30 ft. (9m) from RF Processor RF Tabletop Keypad 30 feet (9m) maximum
RF Signal Repeater RF Maestro Dimmer
RF Keypad RF Processor
#
60 Feet (18m) maximum between RF Processors and Repeaters, or between Repeaters
P/N 292 292-153 153
30 feet (9m) maximum
® JOB NAME:
JOB NUMBER:
SPECIFICATION SUBMITTAL MODEL NUMBERS:
Page