HomeWorks®
RF SWITCHES
Designer-style: Maestro® 048-015 1a 04.16.03
HomeWorks RF Maestro Switches
DESCRIPTION
Indicator Light (Switch Only)
HomeWorks RF Maestro Switches, used in both localized and optimized lighting control designs, function much like standard switches, and have an integral microprocessor, allowing them to be incorporated into the whole-house lighting control system. Communications with the system is accomplished through radio frequency (RF). RF Maestro Switches are useful in locations where single circuits of lighting need to be switched. RF Maestro Switches include a Front Accessible Service Switch for safe lamp replacement. All HomeWorks RF Maestro Switches can be installed in either single pole or 3-way applications. HomeWorks RF Maestro Switches may be used with HomeWorks Maestro Remote Switches to provide control from up to 9 additional locations.
Tapswitch
FASSTM - Front Accessible Service Switch MODEL NUMBERS Switch Switches HRD-8ANS-XX
8A Neutral Wire Switch
Remote Switches HD-RS-XX
Remote Switch
“XX” in the model number represents color/finish code.
Remote Switch
® JOB NAME:
JOB NUMBER:
SPECIFICATION SUBMITTAL MODEL NUMBERS:
Page
HomeWorks®
RF SWITCHES
Designer-style: Maestro® 048-015 2a 04.16.03
S P E C I F I C AT I O N S
• Multiple location switching from Switch and up to 9 Remote Switches.
Regulatory Approvals
• Uses conventional 3-way and 4-way wiring.
• UL Listed. • CSA Certified.
• Use Lutron Designer (Claro® or Satin ColorsTM) or designer-style wallplates from other manufacturers (when using metal wallplates from other manufacturers, it is recommended that a Midnight (MN) switch be used). Wallplates are sold separately.
• FCC Compliant. Complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. • Industry Canada Registered. Power
• Lutron Claro and Satin Colors wallplates snap on with no visible means of attachment.
Operating voltage: 120/127VAC, 50/60Hz. Key Design Features • Green indicator light.
• Requires a 1-gang U.S. wallbox. 3-1/2 in. (89mm) deep recommended, 2-1/4 in. (57mm) deep minimum.
• Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 6100-4-2.
System Communications and Capacity
• Tested to withstand surge voltages without damage or loss of operation,in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits. • Switches operate locally and do not require system control. • Power failure memory: should power be interrupted, the lights will return to their previously set status prior to the interruption.
• Switches communicate with the HomeWorks RF Processor through radio frequency (RF). • Each HomeWorks RF Processor is capable of directly controlling up to 64 RF switches or dimmers.
COLOR / FINISH CODES Switch Color
(code)
Designer Gloss Colors White (WH) Ivory (IV) Almond (AL) Light Almond (LA) Gray (GR) Brown (BR) Black (BL) Satin Colors Matte Hot Ochre Terracotta Desert Stone Stone Limestone Blue Mist Midnight Taupe Eggshell Biscuit Snow
Finishes (HT) (OC) (TC) (DS) (ST) (LS) (BT) (MN) (TP) (ES) (BI) (SW)
Environment • Ambient operating temperature: 0-40°C, 32-104°F, 0-90% humidity, non-condensing. Indoor use only. Warranty • 8 Year Limited Warranty.
MOUNTING
Switch Mounting Screws
Adapter Mounting Screws
Wallbox Switch Wallplate/Adapter purchased separately.
® JOB NAME:
JOB NUMBER:
SPECIFICATION SUBMITTAL MODEL NUMBERS:
Page
HomeWorks速
RF SWITCHES
Designer-style: Maestro速 048-015 3a 04.16.03
DIMENSIONS Side View
Front View Remote Switch
Switch
4-11/16 in. (119mm)
4-11/16 in. (119mm)
2-15/16 in. (75mm)
2-15/16 in. (75mm)
5/16 in. (7.6mm)
1-3/8 in. (34.8mm)
S W I TC H O P E R AT I O N
Indicator Light (Switch only) Indicates light status; glows brightly when switch is on, softly as night light when switch is off
Tapswitch Tap on/off
OFF
ON
FASSTM Front Accessible Service Switch
IMPORTANT NOTICE: FASS - Front Acessible Service Switch - to replace bulb, remove power by sliding FASS switch to the left on either the Switch or Remote Switch. After replacing bulb, slide the FASS switch to the right to restore power to the switch.
速 JOB NAME:
JOB NUMBER:
SPECIFICATION SUBMITTAL MODEL NUMBERS:
Page
HomeWorks速
RF SWITCHES
Designer-style: Maestro速 048-015 4a 04.16.03
S W I TC H L OA D T Y P E / C A PAC I T Y HRD-8ANS L OA D T Y P E
Incandescent, MLV, ELV, High-Intensity Discharge (HID), Fluorescent
M I N . L OA D
10W/VA
MAXIMUM C A PAC I T Y
8A
NEUTRAL WIRE
YES
GA N G I N G A N D D E R AT I N G When ganging switches with other switches or controls in the same wallbox, derating is required.
END of Gang
MIDDLE of Gang
For multi-gang installations, derate load capacities as follows:
Model No.
E n d of G a n g
M i d d l e of G a n g
HRD-8ANS
6.5A
5A
速 JOB NAME:
JOB NUMBER:
SPECIFICATION SUBMITTAL MODEL NUMBERS:
Page
HomeWorks®
RF SWITCHES
Designer-style: Maestro® 048-015 5a 04.16.03
WIRING DIAGRAMS
Single Location Installation HWD-8ANS
Switch Hot
Black
120/127VAC 50/60Hz
Red Blue Cap Off*
Green
Lighting Load
White
Neutral *
When using controls in single location installations, cut off the uninsulated portion of the control’s multi-location wire (blue wire) and cap off using one of the provided wire connectors. DO NOT connect the blue wire to any other wiring or to ground.
Multi-Location Installation1,2 HWD-8ANS with HD-RS
Remote Switch Hot
Red
Black
120/127VAC Green 50/60Hz
Blue
Remote Switch Black
Green
Red
Blue
Remote Switch Black
Green
Red
Blue
Switch Black
Green
Red
Blue
Lighting Load
White Neutral
1 Up to 9 HomeWorks Maestro Remote Dimmers/Switches may be connected to the HomeWorks Wired Maestro Dimmer/Switch. Total blue wire length may be up to 250 ft. (76m).
2 Neutral wire Dimmers/Switches must be connected on the Lighting Load side of a multi-location installation.
® JOB NAME:
JOB NUMBER:
SPECIFICATION SUBMITTAL MODEL NUMBERS:
Page
HomeWorks®
RF SWITCHES
Designer-style: Maestro® 048-015 6a 04.16.03
Home A: 2500 sq. ft. (232m2) or less - all RF devices within 30 ft. (9m) of RF Processor SY S T E M C O M M U N I C AT I O N N OT E S
RF Tabletop Keypad
RF Maestro Switch
• RF Switches must be located within 30 feet (9m) of an RF Signal Repeater or an RF Processor. Multiple repeaters may be necessary to provide adequate coverage. • RF Switches cannot be controlled by the system until the dimmer is addressed and programmed. See the HomeWorks Utility online help.
RF Keypad * Start
*
#
P/N 292 292-153 153
30 feet (9m) maximum RF Processor Home B: 2500 sq. ft. (232m2) or greater - some RF devices more than 30 ft. (9m) from RF Processor RF Tabletop Keypad 30 feet (9m) maximum
RF Signal Repeater RF Maestro Switch
RF Keypad *
60 Feet (18m) maximum between RF Processors and Repeaters, or between Repeaters
P/N 292 292-153 153
30 feet (9m) maximum
® JOB NAME:
JOB NUMBER:
RF Processor
#
1 2 3 4
SPECIFICATION SUBMITTAL MODEL NUMBERS:
Page