rta-rx-f

Page 1

Controller

Ceiling-Mounted RF Receiver rta-rx-f-1 03.17.07

RadioTouchTM Controller for Dimmable Lights

RTA-RX-F RTA-RX-F-347

120/277 V 16 A Max.

TM

1-800-523-9466 1-888-235-2910

USA, Canada Mexico www.lutron.com

CONFIGURACIONES REGLAGES SETTINGS PWR

STAT

ON

5

5

6 7

®

8

+

4

_

3

PS S ig

Occ. S ig

Occ. Com

1 2

24 V

4

15 V

3

Cir Com

2

PELV (Class 2: USA)

1

0-10 V

Description The RadioTouch controller for dimmable lights is designed to work in conjunction with RadioTouch transmitters that have been addressed to the controller. The controller can be addressed to respond to signals from up to 16 RadioTouch transmitters. The controller has the ability to control Lutron Hi-lume® and ECO-10TM ballasts directly. The controller can be connected to a Lutron FDI interface to dim Lutron Tu-wireTM ballasts, incandescent, magnetic low-voltage, and electronic low-voltage loads.

60 Hz

LISTED 243C Ind. Cont. E q.

Coopersburg, PA 18036 USA

®

Refer to the Installers Guide for more detailed instructions. Consulte la Guía de Instaladores para información más detallada. Référer au Guide d’installation pour plus de renseignements détaillés.

PROG

100 Hr/100% P/N 500-10633 © 2006 Lutron Electronics Co., Inc.

RadioTouch RTA-RX-F

The controller mounts to a standard 4 x 4 in. (120 x 120 mm) junction box or to the knockout of a fluorescent fixture. The controller can directly accept inputs from standard 15 and 24 V occupant sensors as well as Lutron’s MW-PS-WH and MW-FPS-WH daylight sensors. The controller operates at either 120/277 V or 347 V , depending on the model number.

Ratings Model Number RTA-RX-F RTA-RX-F-347

R

Voltage 120 or 277 V 347 V

Maximum Current 16 A (20 A breaker) 16 A (20 A breaker)

S P E C I F I C AT I O N S U B M I T TA L

Job Name: Job Number:

Model Numbers:

Page 1


Controller

Ceiling-Mounted RF Receiver rta-rx-f-2 03.17.07

Dimensions

RadioTouch RTA-RX-F

120/277 V 16 A Max.

TM

1-800-523-9466 1-888-235-2910

CONFIGURACIONES REGLAGES SETTINGS PWR

STAT

PROG

ON

5

6 7

8

+

5

_

4

15 V

Occ. Com

Occ. S ig

3

PS S ig

4

1 2

24 V

3

Cir Com

2

PELV (Class 2: USA)

1

0-10 V

®

®

Refer to the Installers Guide for more detailed instructions. Consulte la Guía de Instaladores para información más detallada. Référer au Guide d’installation pour plus de renseignements détaillés.

100 Hr/100% P/N 500-10633 © 2006 Lutron Electronics Co., Inc.

USA, Canada Mexico www.lutron.com

60 Hz

LISTED 243C Ind. Cont. E q.

Coopersburg, PA 18036 USA

7.75 in. (197 mm)

ON

1

2

3

4

5

1

TX

2

3

4

5

6

7

8

RX

4 in. (100 mm)

2.5 in. (17.8 mm)

Mounting Using two screws, mount the unit to a 4 x 4 in. (120 x 120 mm) junction box or directly to a wall (screws and wall anchors are provided) as shown.

R

S P E C I F I C AT I O N S U B M I T TA L

Job Name: Job Number:

Model Numbers:

Features • Provides direct control of a full circuit of Lutron Hi-lume® and ECO-10TM ballasts. • Capable of switching 16 amps of Lutron ballasts. • Provides control of Lutron Tu-wireTM ballasts, incandescent, magnetic low-voltage, and electronic low-voltage loads using an FDI load interface. • RTA-RX-F operates at 120 or 277 V line voltage. • RTA-RX-F-347 operates at 347 V line voltage. • Each controller can be programmed to accept control information from 16 unique RadioTouch transmitters. • Accepts inputs from standard 15 and 24 V occupant sensors and provides power to them (not to exceed 30 mA). • One required per lighting zone to be controlled. • Accepts an input from a Lutron MW-PS-WH or MW-FPS-WH daylight sensor to regulate the electric light based on the presence or absence of sunlight and provides power to the sensor (not to exceed 30 mA). • Accepts control signals from RadioTouch transmitters at 418 MHz. • Provides a burn-in function to assist in the seasoning of new fluorescent bulbs for 100 hours. • Mounts to a standard 4 x 4 in. (120 x 120 mm) junction box or to the knockout of a fluorescent fixture.

Page 2


Controller

Ceiling-Mounted RF Receiver rta-rx-f-3 03.17.07

Power Wiring Diagram

Green White Black (120 V Black/Red

Ground Neutral Switched Hot (blue) Dimmed Hot (orange)

)

Distribution panel 120/277 V 16 A Max.

TM

LISTED 243C Ind. Cont. E q.

Coopersburg, PA 18036 USA

1-800-523-9466 1-888-235-2910

USA, Canada Mexico www.lutron.com

CONFIGURACIONES REGLAGES SETTINGS PWR

STAT

ON

5

6 7

®

8

+

_

5

PS S ig

4 24 V

3 15 V

4

1 2

Cir Com

3

Occ. S ig

2

Occ. Com

1

PELV (Class 2: USA)

Ground Neutral Hot

60 Hz

0-10 V

Fixture ground Lutron FDB or ECO dimming ballast

®

Refer to the Installers Guide for more detailed instructions. Consulte la Guía de Instaladores para información más detallada. Référer au Guide d’installation pour plus de renseignements détaillés.

PROG

100 Hr/100 P/N 500-10633 © 2006 Lutron Electronics Co., Inc.

RadioTouch RTA-RX-F

Green White Black Orange

Fixture ground Green White Black Orange

Red (277/347 V ) Cap the wire that is not being used (red or black, depending on voltage)

Lutron FDB or ECO dimming ballast

To additional dimming ballasts

R

S P E C I F I C AT I O N S U B M I T TA L

Job Name: Job Number:

Model Numbers:

Page 3


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.