Philips Occu Family ‘A smart move’ An Introduction
Internal use only
1
Presentation Overview • Product Overview – Basic Functionality – Installation • OccuFamily Savings • OccuSwitch Advanced • OccuSwitch Wireless – Basic Functionality – Installation • OccuFamily USP’s • Product/Pricing info
Internal use only
2
Product Overview- Basic Functionality Motion-detection • Detection Range- 6x8m, core 4x5m – Retractable shield inbuilt • Height- between 2.5 and 3.5m • Adjustable time-out (1-30mins) • Smart-timer (+10mins) Daylight Sensing • Daylight Override (inc PD) • Optional Daylight Switching
Internal use only
3
Product Overview- Installation • Surface or recessed
LRH 1070: Sensor surface box
• Load (Up to 6A)
• Conventional or Wieland LCC1070: Wieland Cable
• Compatible with any lamp/luminaire type
• Sensor Orientation – Short side parallel to ‘Philips’ brand Internal use only
4
OccuFamily Savings Energy • Up to 30% motion-detection • Up to 40% with motion-detection and daylight sensing Cost • Typical 2/3 year payback • Savings on: – Installation – Lamp Maintenance/Renewal
Internal use only
5
OccuSwitch Advanced (LRM 1080) • Parallel Operation – Max. 10 devices – Separate bus signal
• Local Override – Wall & hand-held – Commissioning tool IRT 8010 (Wall)
IRT 8050 (Hand-held)
IRT 8099 (Commissioning tool)
• Absence Mode – Disable automated switch on – Remote Control Internal use only
6
OccuSwitch Wireless- Functionality • Same energy saving/payback story as rest of range • ‘Quick installation for a long lasting system’ – Suited for retrofit/existing applications – No sensor wiring- easy to install – 10 year battery life • Capacity (up to 6A) – Up to 10 units (sensors/actuator) (up to 160m²) – 3:1 (sensor : actuator) ratio for most applications • LED indicators – Feedback, configuration and operational status • Battery life, sensor and actuator • Walk (sensor location) & Wink (network) Test
Internal use only
7
OccuSwitch RF/Wireless- Installation • Components – Wireless sensor (LRM 1763) – Actuator (LRA 1750) • Install – Sensor • Surface-mounted- adhesive • Equipped with battery, no electrical installation
(if present)
• Battery life- 10 years, AA – Actuator • Connected to mains at convenient point (230v) • Wieland (LCC1720) or conventional (screwpoint)
Internal use only
8
Occu Range USP’s Basic (LRM 1070)
Advanced (LRM 1080)
RF/Wireless (LRM 1763)
Detection -Core and Periphery -Square range
Parallel Operation
Installation Flexibility
Retractable Shield
Local Override & Absence Mode -IRT 8050 (wall), IRT 8010(hand)
Testing Capability
Commissioning Tool IRT 8099
LED indicator
Smart-timer - Extend delay time by 10 mins if movement detected shortly after switched off.
Internal use only
-Few limitations on sensor/actuator positioning -No sensor wiring required -Adhesive mounted sensor for variable positioning
-Set light level -Power-up behaviour etc
-Walk-test- to find the best sensor location using illumination of LED -Wink-test- to test for connection between devices.
-Feedback for sensor, actuator and battery life.
9
Core Product
Internal use only
Product Name
Ordering Data
Basic OccuSwitch
LRM 1070
Advanced OccuSwitch
LRM 1080
Wireless Universal Actuator
LRA 1750
Wireless Sensor
LRM 1763
10
Range Accessories
Internal use only
Product Name
Ordering Data
Wieland Cable (Basic & Advanced)
LCC 1070
Ceiling Mount Box
LRH 1070
Advanced Commissioning Tool
IRT 8099
Local Control (Hand-held)
IRT 8010
Local Control (Wall)
IRT 8050
Wieland Cable (RF)
LCC 1720
11