Vancouver Door 2012 Brochure by Sean Nixon

Vancouver Door Company Vancouver Door Company has been a family owned business since 1941. In 1993, a modern facility was built south of Seattle to specifically manufacture Architectural wood doors. The current facility is continually being upgraded with new and improved equipment to stay up to date with the ever changing industry demands and processes. Our research and development group oversees rigorous testing of our doors. New ideas and fresh perspective fuel our continued growth and innovation.

Vancouver Door Company is certified as a women’s business enterprise through the Women’s Business Enterprise National Council (WBENC), The nation’s largest third party certifier of businesses owned and operated by women in the US. We recognize the commitment to supplier diversity that is embraced by corporations and government agencies today, and we can add diversity to our supply chain.

CONTENTS General Information Quality Certification……………………….. Warranty……………………………………. Sustainable Forest Management………...

1 1 1

Vancouver Door Company’s commitment to our customers and our expert personnel and communication ensures you that your project will be handled professionally. You can depend on us. For your wood door needs call 1-800-999-3667

SIZES

Face Selection Hardwood Veneers……………………….. High Pressure Laminate………………….. MDO and Hardboard………………………

2 2 2

Single doors: Up to 4’x10’ (1218mm x 3048mm) Pairs: Up to 8’x10’ (2436mm x 3048mm) See pages 6 & 7 for fire door sizes and specifications.

Core Selection Architectural Solid Core Doors…………... Fire Rated Doors………………………….. Acoustical Doors…………………………... X-Ray (Lead Lined) Doors……………….. Bullet Resistant Doors……………………. Hollow Core Doors………………………... Sliders, Pocket Doors & Panels………….

3 4 5 5 6 6 6

Special Services Wicket Door ……………………….………. Transoms…………………………………... Dutch Door…………………………………. Vision Lights ……….……………………… Louvers ……………………..…..…………. Inlays, Quirks, Sketch face ………………. Edge Options………………………………. Factory Machining………………………… Factory Pre-finishing………………………. Preservative Treating……………………... Applied Moldings…………………………... Surface Plates………...…………………... Stile and Rail Doors …………..…………..

7 7 7 7 7 8 8 8 8 8 8 7 8

Fire Door Comparison Chart 20 and 45 Minute Singles & Pairs ………. 60 and 90 Minute Singles & Pairs ………. Positive Pressure “S” Label ……………... Positive Pressure “S” Label 20 & 45 ……. Positive Pressure “S” Label 60 & 90 …….

9 10 4 4&9 4 & 10

LEED Overview and Product Matrix …………... 11

Oversize doors / Barn doors—6’w x 14’h max.

STANDARDS Vancouver architectural doors meet or exceed the following Standards for grades and performance levels.: WDMA I.S. 1-A 11 AWS Quality Standards, Edition 1, adopted by AWI, WI & AWMAC, Section #9

GREEN/ENVIRONMENTAL ISSUES FSC Certification Scientific Certification Systems (SCS) in accordance with the rules of the Forest Stewardship Council (FSC) has certified Vancouver Door Company, Inc. Our products have been harvested from forests that meet stringent environmental, social and economical standards. We are certified to FSC Standard: FSC-STD-40-004 and our Chain of Custody Certificate ensures that you are receiving a fully certified product. WDMA defines Sustainable Forest Management as the stewardship of forests in a way that promotes the health, productivity and potential to fulfill relevant ecological, economic and social functions at the local, national and global levels, both today and for future generations. For LEED credit information and product compliance refer to the matrix on page 11.

WARRANTY All doors manufactured by Vancouver Door Company, Inc, are warranted to be of good material and workmanship and free from defects which render them unserviceable for the ordinary uses for which they are recommended. For warranty duration refer to the specific core selection on pages 3, 4, 5 & 6 or request a copy of our warranty.

Page 1

Vancouver Door Company, Puyallup WA.

1-800-999-3667

www.vancouverdoorco.com

Face Selection HARDWOOD VENEER FACES:

The beauty of veneer is in the natural variations of texture, grain, figure, color, and the way it is assembled on a door face. Faces will have the natural variations of grain inherent in the species cut.

Veneer Cuts:

The way in which a log is cut in relation to the annual rings, determines the appearance of veneer.

Plain Sliced Knife

Quarter Cut Quarter Slicing (Honduras, African & Philippine Mahogany) A narrow striped pattern is produced. These vary in width from specie to specie. Slicing is done at a 90 degree angle to growth rings.

Plain Sliced (Flat Cut) Slicing is done parallel to a line through the center of the log. Cathedral and straight grained patterns result.

Comb Grain (Rift Cut) (Red and White Oak) Limited availability. This is a rift-cut veneer distinguished by the tightness and straightness of the grain along the entire length of the veneer.

Rift Cut Knife

Matching Veneers Joint

Veneer Assembled on Face Joint

Joint

Book Match Most commonly used match. Every other piece of veneer is turned over like adjacent pages in a book. The veneer joints match and create a mirrored image pattern at the joint line. Book matching is used with rotary, plain sliced, quarter, rift-cut or comb grain veneers.

Slip Match Adjoining pieces of veneer are in sequence without turning over every other piece. The grain figure repeats, but joints won’t show mirrored effect. Slip matching is often used in quarter rift-cut and comb grain veneers.

Random match A random selection of individual pieces of veneer from one or more logs. Produces a “board-like” appearance. It is most commonly used in opaque grades.

OTHER FACE OPTIONS High Pressure Laminate Faces may be selected from a full range of colors available from major laminate manufacturers. Selections include solid colors, wood grains and special patterns. Interior use only.

Rotary Cut This cut follows the log’s annual growth rings, providing a general bold random appearance.

Medium Density Overlay The phenolic impregnated overlay was developed for premium paint grade surfaces and is superior to paint grades of veneer as it minimizes veneer show through.

Joint

Running Match Asymmetrical appearance in any single door face. Veneer pieces of unequal width are common. Each face is assembled from as many veneer pieces as necessary.

Tempered Hardboard (MDF) - (HDF) Faces provide economical paintable doors or veneer overlay applied by others.

Joint

Balance Match Symmetrical appearance. Each face is assembled from even or odd veneer from pieces of uniform width before trimming. This match reduces veneer yield.

Joint

Center match Symmetrical appearance. Assembled from even number of uniform width veneer before trimming. Veneer joint is in center of panel. This match reduces veneer yield.

Veneer Characteristics grading: Grades; AA, A, B, All veneers are provided to meet WDMA IS -1A & AWS Edition 1 standards. Note; AA Grade is subject to availability, cost and lead time. Set and blue print matching must be specified when ordering.

Page 2

Vancouver Door Company, Puyallup WA.

1-800-999-3667

www.vancouverdoorco.com

Solid Core Doors, 520P, 520S & 520C SOLID CORE DOOR 520P

SOLID CORE DOOR 520C

Veneer and High Pressure Laminate Particle Board Core, Bonded and Sanded (Extra Heavy duty supplied unless noted otherwise) Also Available 20 Minute Rated, See pg. 4 & 9

Veneer and High Pressure Laminate Structural Composite Lumber Core, Bonded and Sanded (Extra Heavy duty supplied unless noted otherwise) Also Available 20 Minute Rated, See pg. 4 & 9

WDMA: PC-7 WDMA: PC-HPDL-3/5

WDMA: SCLC-7 SCLC-5 WDMA: SCL-HPDL-5

Blocking Options: 5” (or as specified) top and/or bottom rail(s). For undercutting and specialized hardware. Must be specified if required.

AWS: PC-7 PC-5 AWS:PC-HPDL-3/5

AWS: SCL

Top and Bottom Horizontal Edge: 1-1/8” minimum solid wood or structural composite lumber, one piece, laminated or LVL.

Top & Bottom Horizontal Edge: 1-1/8” minimum solid wood or structural composite lumber, one piece or laminated or LVL.

Vertical Edge: 1-1/2” minimum hardwood; solid, laminated veneered. Backer or inner ply may be structural composite lumber or LVL.

Vertical Edge: 1-1/2” minimum hardwood; solid, laminated or veneered. Backer or inner ply may be structural composite lumber or LVL.

Core: Particle board, ANSI A208, 1, grade LD-1 or LD-2.

Core: Structural Composite Lumber Core (SCLC). Additional blocking not required.

Core/Edge Interface: Stiles and rails high frequency bonded to core and core assembly sanded prior to application of cross band and veneer.

Core/Edge Interface: Stiles and rails high frequency bonded to core. Core assembly sanded prior to application of crossband and veneer

Crossband: 2 ply edge glued hardwood or one piece HDF. (2-ply shown)

Faces: Selected hardwoods minimum 1/50”, high pressure laminate, medium density overlay or hardboard. High pressure laminate 0.050” direct to core, 0.050” with cross band or 0.125”.

Warranty: Lifetime for interior use / one year exterior, fully type 1 wood or MDO faces only.

520P doors are also available with “RECOR” & Agrifiber core. Please call or sales department for more information on these products.

SOLID CORE DOOR 520S Veneer and High Pressure Laminate Stave Core, Bonded and Sanded (Extra Heavy duty supplied unless noted otherwise) Also Available 20 Minute Rated, See pg. 4 & 9 WDMA: PC-7 SLC5 AWS: PC-7 SLC-5

Available Options for 520P, 520S & 520C • • • • • • • • • • • •

Top & Bottom Horizontal Edge: 1-1/8” minimum solid wood or structural composite lumber, one piece or laminated or LVL.

Thicknesses of 1-3/8” to 2-1/4”. Fire rating to 20 minute - Neutral & Positive Pressure, See Page 4 & 9 for requirements and options. STC rating = 32 (Flush & Glazed). May require additional gasketing / seals. LEED Credits, See page 11.

Vertical Edge: 1-1/2” minimum hardwood; solid, laminated or veneered. Backer or inner ply may be structural composite lumber or LVL.

Carb 1 & 2 compliant components.

Core: Stave lumber.

Lead lined or electro shielding. (See page 5)

Core/Edge Interface: Stiles and rails high frequency bonded to core and core assembly sanded prior to application of cross band and veneer.

Vision lite and louver cutouts with matching flush or raised lip stop. Metal Vision panels or louvers supplied upon request. (See page 7) Applied moldings of any configuration, profile and species. (See page 8) Quirks, grooves and inlays. (See page 7)

Crossband: 2 ply edge glued hardwood or one piece HDF. (HDF shown) Faces: Selected hardwoods minimum 1/50”, high pressure laminate, medium density overlay or hardboard. High pressure laminate 0.050” direct to core, 0.050” with cross band or 0.125”.

Dutch cut with matching shelf (See page 7). Wicket door (inset to primary door see page 7). 2 or 4 panel Bifold units. (See page 6)

Page 3

Vancouver Door Company, Puyallup WA.

Warranty: Lifetime for interior use / one year exterior, fully type 1 wood or MDO faces only.

1-800-999-3667

www.vancouverdoorco.com

Fire Rated Mineral Core Doors, 745, 760 & 790. FIRE DOORS 760 & 790

FIRE DOOR 745 Mineral Core 45, Minute Rated, See page 9

Mineral Core, 60 & 90 Minute Rated, See page 10.

WDMA: FD-7 FD-5 WDMA: FD-HPDL

AWS: FD-7 FD-5 AWS:FD-HPDL-5

Top and Bottom Horizontal Edge: 1” GP Firestop I See Positive Pressure compliance for all ratings at bottom of page.

Top and Bottom Horizontal edge: 1-1/2” GP Fire stop II+I. See Positive Prressure compliance for all ratings at bottom of page.

Vertical Edge: GP Fire stop 1 or II with laminated hardwood. See note 1 at bottom of this page. Additional material may be required.

Vertical Edge: GP Fire stop II + I with laminated hardwood. See note 1 and bottom of this page. Additional material may be required.

Core: Georgia Pacific (proprietary) Mineral core .

Core/Edge Interface: Stiles and rails high frequency bonded to core and core assembly sanded prior to application of crossband and veneer.

Crossband: 2 ply edge glued hardwood or One piece HDF (One piece HDF shown)

Faces: Selected hardwoods minimum 1/50”, high pressure laminate, medium density overlay or hardboard. High pressure laminate 0.050” with crossband or 0.125”.

Faces: Selected hardwoods minimum 1/50”, high pressure laminate, medium density overlay or hardboard. High pressure laminate 0.050” with crossband.

Warranty: Lifetime for interior use only.

Available Options for 745, 760 & 790

• • • • •

AWS: FD-7 FD-5 AWS:FD-HPDL-5

Thickness, 1-3/4 only. STC rating of 35. May require additional gasketing / seals. L.E.E.D. credits (See page 11) Vision lites, Metal kits supplied upon request. All glazing must comply with test approvals. Ask our tech department. Applied moldings. Limited to rating requirements and area limitations.

Warranty: Lifetime for interior use only.

Note 1: Any technological advancement made by Georgia Pacific Corp. in Fire Stop I or II is automatically included.

TECHNICAL DATA 745, 760, 790 Slam Cycle

Over 1,000,000

Screw Holding

1030.4 lbs.

Split Resistance

847.9 lbs. average.

Blocking (Reinforcement) Options: 5” (or as specified) for undercutting and specialized hardware. Specify by number and dimension desired.

5” TR

5” BR

HB-1

HB-2

5”x18” Blkg

5” Blkg

5”x10” Blkg

HB-4

HB-6

HB-8

POSITIVE PRESSURE AND “S” LABEL COMPLIANCE ALL RATINGS Category A and B, Doors and Jambs from the following options; Georgia Pacific FIREDOOR Components / ZERO International / PEMKO Manufacturing / Vancouver Door Company Inc. Testing.

INTUMESCENT FREE DESIGN ON 20 / 45 / 60 AND 90 MINUTE DOORS *** Any testing advancement by these companies will automatically be available to customers of Vancouver Door Company Inc. Contact our factory for updates on these systems. 20 Minute/45, 60, & 90 Minute approval to UBC Fire Test Standard 7-2, 1997

Smoke and Draft Control Door Assemblies UBC 7-2 (1997) Section 7.210

Now available 20 Minute Positive Pressure to 4’x9’ single and 8’x9’ Approval for supplemental “S” label. 20, 45, 60 and 90 Minute Regular and double egress pairs. Series tested was 520P with 11/2” total hardwood laminated stiles. 20 Minute (metal frame) to 4’x9’ singles and 8x9’ regular and double egress pairs. (Wood Frames) to 3’x9’ singles and 6’x9’ regular pairs. 45, 60, and 90 Minute Mineral Core Fire Doors to 4’x8’ singles and 8’x8’ regular and double egress pairs. Total intumescent and edge sealing system including assembly installation instructions provided by VDC.

745, 760 & 790 Mineral Core Fire Doors are available in Positive Pressure to 4’x8’ Singles and 8’x8’ regular and Double egress pairs.

Page 4

Vancouver Door Company, Puyallup WA.

1-800-999-3667

www.vancouverdoorco.com

Specialty Doors, Acoustical, X-Ray, Electro Shielding and

Bullet Resistant.

ACOUSTICAL DOORS (STC) 800

LEAD LINED (X-RAY DOORS) 600XR

Special Acoustical Core Veneer and High Pressure Laminate

Also Available 20 Minute Rated, See, page 9. Particle Core, Stave Lumber Core, Structural Acoustical Rating STC 37

WDMA: SR

WDMA: LL

AWS: SR

Top and Bottom Horizontal edge: 1-1/2” top rail and 2-3/4” bottom rail minimum solid wood, structural composite lumber or LVL.

AWS: LL

Top and Bottom Horizontal edge: 1-1/4” solid wood or structural composite lumber, one piece or laminated. Vertical Edge: 1-1/2” minimum hardwood; solid, laminated or veneered. Backer or inner ply may be structural composite lumber or LVL.

Vertical Edge: 1-1/2” minimum hardwood; solid, laminated or veneered. Backer or inner ply may be structural composite lumber or LVL. Core: Acoustical material.

Core: Particleboard, ANSI A208,1, grade LD-1 or LD-2. Optional Stave core or SCLC also available..

Crossband: 2 ply edge glued hardwood or one piece HDF. (2-ply shown)

Lead: Lead shielding is edge to edge under both faces to provide optimal shielding. Core/Edge Interface: Stiles and rails high frequency bonded to core and core assembly sanded prior to application of lead, crossband and veneer.

Faces: Selected hardwoods minimum 1/50”, high pressure laminate or medium density overlay. High pressure laminate 0.050” with cross band or 0.0125”.

Crossband: Edge glued or one piece crossband. Faces: Selected hardwoods minimum 1/50”, high pressure laminate, medium density overlay or hardboard. High pressure laminate 0.050” with crossband or 0.125”.

Warranty: Five year warranty for interior use / one year exterior, fully Type 1 only, wood or MDO faces only.

Warranty: Lifetime for interior use.

Electro Shielding doors are constructed similar to X-Ray

ACOUSTICAL RATINGS - ASTM E90 - 97 & 99

Lead Thickness

STC RATING

THICK

MAX LIGHT OPENING

FIRE RATING

1-3/4

N/A

20 MIN.

1-3/4

N/A

45,60 & 90 MIN.

1-3/4

N/A

1-3/4

N/A

1-3/4

FULL LIGHT

1-3/4 lead lined

N/A

1-3/4

24X30

1-3/4

24X24 10X36

1-3/4

N/A

1-3/4

N/A

Lbs. per sq. ft.

1/16” 1/8” 1/4”

4 (Typical) 8 16

BULLET RESISTANT 650 Multiple ply ballistic fiberglass core—STC 37

UL 752 -Level 3 Thru 5 Top and Bottom Horizontal edge: 1” solid hardwood .

20 MIN.

Vertical Edge: 3/4” minimum solid hardwood and or structural composite lumber or LVL. Core/Edge Interface: Stiles and rails high frequency bonded to core assembly then sanded prior to application of crossband and veneer.

STC TEST RESULTS AVAILABLE BY REQUEST.

Available Options for 800, 600 & 650. Many of the same options listed for the “Solid Core” products also apply to the products listed on this page.

Faces: Selected hardwoods minimum 1/50”, high pressure laminate, medium density overlay or hardboard. High pressure laminate 0.050” with crossband or 0.125”.

Check with our sales or technical departments.

Warranty: Lifetime for interior use only.

Page 5

Vancouver Door Company, Puyallup WA.

1-800-999-3667

www.vancouverdoorco.com

Hollow Core, Bifolds and Sliders STANDARD HOLLOW CORE 310

INSTITUTIONAL HOLLOW CORE 510

Honeycomb Core.

Honeycomb Core. 2 lock blocks & Intermediate rail included. WDMA: IHC-7 AWS: IHC-7 WDMA: IHC-HPDL

WDMA: SHC-7 WDMA: SHC-HPDL

AWS: SHC-7

Top and Bottom Horizontal edge: 1-1/8” minimum solid wood, medium density fiberboard or structural composite lumber, one piece or laminated.

Top and Bottom Horizontal edge: 6-1/2” solid wood, medium density fiberboard or structural composite lumber, one piece or laminated.

Vertical Edge: 1” minimum solid, laminated or veneered wood. Backer or inner ply may be structural composite lumber or LVL.

Vertical Edge: 2-1/2” minimum solid, laminated or veneered wood. Backer or inner ply may be structural composite lumber. Core: Honeycomb fully expanded to edges.

Core: Honeycomb fully expanded to all edges. Bonding: Vertical edges and rails not bonded to core.

Bonding: Vertical edges and rails not bonded to core.

Crossband: Edge glued or one piece cross band.

Crossband: Edge glued or one piece crossband.

Faces: Selected hardwoods minimum 1/50”,

Faces: Selected hardwoods minimum 1/50”, high pressure laminate, medium density overlay or hardboard. High pressure laminate 0.050” with crossband or 0.125”.

High Pressure Decorative Laminate (HPDL) NOT provided on Hollow Core doors. Warranty: One year for interior use. 0nly!

Warranty: One year for interior use only.

BIFOLD (FOLDING) UNITS, 2 & 4 DOOR

SLIDERS, POCKET DOORS & PANELS

Hollow Core & Solid Core. (Non rated) Veneer, HDF, MDO and High Pressure Laminate. 1-3/8” - 1-3/4” thicknesses.

Hollow Core & Solid Core. (Non rated) Matching Veneer, HDF, MDO and High Pressure Laminate. 1-3/8” - 1-3/4” thicknesses.

Heavy Duty hardware supplied upon request. Blocking (Reinforcement) Options: Specify by number and dimension desired.

5” TR

5” BR

HB-1

HB-3

5”x18” Blkg

HB-4

5” Blkg

HB-5

5”x5” Hook Block

HB-7

Available Options: • • • • 2 & 4 Door Bifold unit

Page 6

LEED Credits (Solid core doors only). Vision lite and Louver cut outs. Quirks, grooves and inlays. Hardware preparation.

Warranty: Lifetime Interior use only

Vancouver Door Company, Puyallup WA.

1-800-999-3667

2 & 4 Door sliders.

www.vancouverdoorco.com

Special Services and Products. Vancouver Door Companyâ&#x20AC;&#x2122;s many custom services reduce job site costs and assist in meeting time requirements on special installations.

WICKET DOORS

DOORS w/ VISION LITES Wicket doors are utilized in applications where only a portion of the door opening needs to be accessible. They consist of the primary door and the wicket insert which can be opened to allow access while keeping the primary door closed / locked.

Vision lites can be provided in many different configurations and sizes. We can provide stop and glass. Factory glazing is available as well.

Faces are matched so that the wicket door matches the face on the primary door.

Check with our sales or tech department

Available non-rated and 20, 45, 60, and 90 minute rated. See pages 9 & 10.

Standard bead stop

Wicket doors are attached with continuous or concealed hinges and can be latched with standard lock prep. Not approved for fire rated applications. Not approved for STC rated applications.

DOORS & TRANSOMS

LOUVER DOORS

Veneers may be continuous match, end match or no match. (End matched shown)

Variable size and type louvers can be provided and installed at the factory. From small to half to full size louvers.

See WDMA: I.S. 1-A, Section A-6

Great for providing pass through Ventilation and fresh air.

Rabetted meeting rails are optional. Chevron style louvers are available in most hardwoods.

Not approved for STC applications. Available non-rated and 20, 45, 60, and 90 minute rated. See pages 9 & 10.

Available non-rated and 45, 60, and 90 minute rated. See pages 9 &10.

Check with our sales or tech department for details & options.

Not approved for 20 minute!

INLAYS, QUIRKS, APPLIED MOLDING.

DUTCH DOORS Dutch doors are utilized in applications where the upper half of the door may be opened while keeping the lower half closed. Both leaves are typically latched together to maintain a single opening.

Inlays, Quirks (grooves), Applied molding can be provided in many different configurations and sizes based on your specifications. Typical molding profiles

Dutch door shelves on one side only or on both sides of the door. All shelves are sent loose for field installation. Available non-rated and 20, 45 or 60 minute rated. See pages 9 & 10. Check with our sales or tech department for details & options

Page 7

Vancouver Door Company, Puyallup WA.

Available non-rated and 20, 45, 60, and 90 minute rated. See pages 9 & 10.

1-800-999-3667

www.vancouverdoorco.com

Special Services—continued SKETCH FACE Various configurations based on any given design and veneer species.

EDGE OPTIONS Prefitting and edge beveling. Radius edges. Edge rabbeting. Veneered or plastic laminate edges to match faces. FACTORY MACHINING Doors can be prepared for any standard or custom hardware. Precision factory machining and pre-fitting ensure proper hardware preparation for tolerances specified by National Fire Protection Association (NFPA), the Architectural Woodwork Standards (AWS), the Window and Door Manufacturers Association (WDMA) and the Door and Hardware Institute (DHI).

STILE and RAIL Wood doors in various species, sizes, configurations and fire ratings. Concealed overhead closer w/ fire shield for rated doors

FACTORY PREFINISHING The controlled application process in factory prefinishing assures top quality finishes with maximum durability not possible with site applied coatings. See WDMA I.S. 1-A, Section F-1 through F-7.

Some of our machining options include: • Concealed Vertical Rods (Less Bottom Rod—LBR)

• • • •

Raceway’s (Wire-chases) Concealed hinges, Anchor hinges, Pivot hinges. Mortised door bottoms Mortised edge guards

Our expert staff can coordinate your projects to ensure a smooth installation of hardware to doors.

WOOD JAMBS Wood and wood veneered jambs in many species side light jambs are also available. Available non-rated, 20 to 90 minute rated. Positive Pressure “S” label available in 20 to 90 minute singles and pairs. 20 minute rated wood jambs in sizes up to 4’x9’ singles and 8’x9’ pairs.

PARTITIONS, WALL PANELS & DESK TOPS. Provided in any specie veneer and plastic laminate. Sizes up to 4’x10’ in 1” to 1-3/4” thick with edge banding to match or as specified.

PRESERVATIVE / INSECT TREATMENT Available on request.

Page 8

Vancouver Door Company, Puyallup WA.

1-800-999-3667

www.vancouverdoorco.com

Fire Rated Doors - Single Swing and Pairs 20 Minute

Ratings

45 Minute

Swing Door Pair Regular and tranor Double som Egress

Lead Lined Single Swing

Single Swing, Door and Transom

Pair Regular or Double Egress

Yes*

4’x10’ Single 4’x10’ DR/TR Max TR 4’x2 Or 3’x3’

Up o 8’x9’ 6’x10’ 8’x9’ DE

4’x9’

4’x10’ 4’x9’ DR/TR Max TR 4’x3’4”

6’x7’ Note: 6 8’x8’ Reg/DE 8’x9’ CVRE

Protection Plates

48”x48”

48”x48” Note: 2

EPT

Yes

Yes Note: 2

Wire Chase

Yes

Dutch Door

4’x8’ No Vision Panel

N/A

4’x9’ No Vision Panel

N/A

Maximum Vision Panel

1,296 sq. in. 36” Wide 54” High

N/A

1,296 sq. in. 2,638 sq. in. Note: 1

Maximum Louver Fusible Link

N/A

24”x24”

24”X24’ each leaf

Viewers

Up to 1” diameter

N/A

Up to 1” diameter

Hinges

Per NFPA #80

Per NFPA #80 Note: 7

Locks

Cylindrical / unit / mortise

Exit Devices

Listed rim, mortise Listed rim, mortise or or vertical rod vertical rod

Listed rim, mortise or vertical rod

Positive Pressure “S” Label Sizes

Flush Bolts Top/Bottom for Inactive Leafs

N/A

Edge Guards

Yes Note: 3

Concealed Vertical Rod

Yes

Yes, no channel required

N/A

Yes, 5”channel may be required

Yes, 5” channel may be required

Concealed Closers Yes

Yes

N/A

Yes Note: 2

Applied Moldings

Yes

Automatic Door Bottoms

Yes

N/A

Yes Note: 2

Yes note: 2

Note: (1) (2) (3) (4)

Listed surface manual or automatic flush N/A bolts installed with 28 gauge liner

Special glass and stop required/max size 36”x80”. Special blocking required. Special edges required. Special glass and stop required.

Listed surface manual or automatic flush bolts installed with 28 gauge liner

N/A

(5) Special blocking required. (6) No astragal required with special blocking. (7) Special hinges and pivots require additional blocking.

(8) Contact factory for hardware options.

*Contact factory for maximum sizes and options for Neutral and Positive Pressure requirements. Page 9

Vancouver Door Company, Puyallup WA.

1-800-999-3667

www.vancouverdoorco.com

Fire Rated Doors - Single Swing and Pairs 60 Minute

Ratings

90 Minute

Single Swing, Door and Transom

Pair Regular or Double Egress

Single Swing, Door and Transom

Pair Regular or Double Egress

Yes*

4’x10’ 3’x9’ DR/TR Max TR 4’x3’4”

6’x7’ Note: 6 8’x8’ Regular/DE 8’x9’ CVRE

4’x10’ 3’x9’ DR/TR Max TR 4’x3’4”

6’x7’ Note: 6 8’x8’ Regular/DE Note: 8 8’x9’ CVRE

Protection Plates

48”x48” Note: 5 page 9

EPT

Yes Note: 2 page 9

Wire Chase

Yes

Dutch Door

4’x9’ No Vision Panel

N/A

Maximum Vision Panel

100 sq. in. 1015 sq. in. Note: 4 page 9

Maximum Louver Fusible Link

24”x24”

24”x24” each leaf

24”x24”

24”x24” each leaf

Viewers

Up to 1” diameter

Hinges

Per NFPA #80 Note: Per NFPA #80 Note: 7 7 page 9 page 9

Per NFPA #80 Note: 7 page 9

Locks

Cylindrical / unit / mortise

Exit Devices

Listed rim, mortise or vertical rod

Flush Bolts Top/Bottom for Inactive Leafs

N/A

Listed surface manual or automatic flush bolts

N/A

Listed surface manual or automatic flush bolts installed

Edge Guards

Yes Note: 3, page 9

Yes Note: 3 page 9

Concealed Vertical Rod

Yes, 5” channel may be required.

Yes, 5” channel may be required

Concealed Closers

Yes Note: 2 page 9

Applied Moldings

Yes

Automatic Door Bottoms

Yes Note: 2 page 9

Positive Pressure “S” Label Sizes

Testing: Labeled fire doors have been tested in accordance with UL 10(B), CAN 4S 104(ULC-S104), NFPA 252 and UBC 7-2 fire door test standards.

Page 9

Labeling: Testing, inspection and labeling is by Intertek Testing Services/Warnock Hersey, Inc. Vancouver Door Co. is listed to manufacture and machine fire rated wood doors. Labels are affixed to hinge edge at eye level, or on top rail if positive pressure.

Vancouver Door Company, Puyallup WA.

1-800-999-3667

www.vancouverdoorco.com

Matrix for LEED Credit Contributions Developed by the U/S Green Building Council (USGBC), Leadership in Energy and Environmental Design (LEED) provides building owners and operators a concise framework for identifying and implementing practical and measurable green building design, construction, operations and maintenance solutions. The matrix below identifies the wood doors (Veneered and laminated faces) that qualify for credits for a specific project. All LEED projects must be specified when submitting a quote request or a purchase order to ensure that you obtain the necessary contributions from the doors. Please feel free to contact us with any questions or if you need additional information. 1-800-999-3667 All Vancouver Door products are in compliance with California Air Resource Board (CARB) Phase 2 requirements. Product Type (Wood & HPDL Faces)

MR 4.1

MR 4.2

MR 5.1

MR 5.2

MR 6

MR 7

EQ 4.4

310 - Hollow Core (HC)

Yes

510 - Institutional Hollow Core (IHC)

Yes

520P - Particle Core (PC)

Yes

520A - Agrifiber Core (AC)

Yes

520S - (SLC)

Yes

520C - (SCLC)

Yes

600P - Lead Lined (LLPC)

Yes

600S - Lead Lined (LLSLC)

Yes

600C - Lead Lined (LLSCLC)

Yes

650P - Bullet Core (BCPC)

Yes

745M - Mineral Core (MC45)

Yes

760M - Mineral Core (MC60)

Yes

790M - Mineral Core (MC90)

Yes

836 - Sound Transmission Class (STC36)

Yes

839 - Sound Transmission Class (STC39)

Yes

840 - Sound Transmission Class (STC40)

Yes

841 - Sound Transmission Class (STC42)

Yes

843 - Sound Transmission Class (STC43)

Yes

MR 4.1 Recycled Content: 10% (Post Consumer + 1/2 PrePre-Consumer) MR 4.2 Recycled Content: 20% (Post Consumer + 1/2 PrePre-Consumer) MR 5.1:Regional Materials: 10% Extracted, Processed & Manufactured Regionally MR 5.2 Regional Materials: 20% Extracted, Processed & Manufactured Regionally MR 6: Rapidly Renewable Materials MR7: Certified Wood EQ 4.4: LowLow-Emitting Materials - No Added Urea Formaldehyde (NAUF)

Page 11

Vancouver Door Company, Puyallup WA.

1-800-999-3667

www.vancouverdoorco.com

Projects Wildhorse Pass Resort Location: Chandler, Arizona Number of doors: 204 Species: P.S. Red Oak & PS Red Alder—Slip matched.

Pan Pacific Hotel Location: Seattle WA. Number of doors: 32 Species: Qtr. Sawn Horizontal Grain Zebrawood.

Ft. Harrison Hotel Location: Clearwater, FL. Number of doors: 283 Species: Painted Hardboard w/ quirks & illuminate inlays.

Hilton Hawaii— Hawaii—Coral ballroom Location: Honolulu, HI. Number of doors: 70 Species: P.S. White Birch w/ embossed design.

Vancouver Door Company, Puyallup WA.

1-800-999-3667

www.vancouverdoorco.com

Vancouver Door Co. Inc. P.O. Box 1418, Puyallup WA 98371 Office: (253) 845-9581, Toll Free US 1-800-999-DOOR, Fax: (253) 845-3364 E-mail: sales@vancouverdoorco.com, web: www.vancouverdoorco.com

Proudly made in America