FIVE STEPS TO PROPER MOLD TREATMENT
Mold is a pretty serious problem for lots of homes. There is something you should keep in mind: when you face mold, remove it immediately before it gets huge and hurt both you and your home. So, there are 5 steps to effective mold removal.
#1. Find all places affected by mold The worst part about mold is that it’s an invisible intruder: it can grow in places which are hard to see and spot affected areas.
Keep in mind that mold problems appear only because of water or moisture issue. So, your goal is to find out where dampness comes from and how it damages your house.
Check each room of your home thoroughly as there is no point in mold treatment of some of the mold. Remember that in case you miss a small spot, you’ll get the same issue on your hands once again.
Double-check carpets, inside walls, heating, air conditioning, ceiling, bathtubs, sinks, countertops, etc. These are places with higher moisture – just what mold like.
If you find a water problem (such as flood damage), fix it immediately. It won’t let mold spores continue to grow.
However, the best and the most effective test for mold can be done by professionals. So, consider hiring specialists from restoration companies. You can locate mold on your own, but when it’s completed by an expert, there are more chances mold won’t spread again.
#2. Prepare all supplies Assemble plastic bags in which you’ll place moldy materials, gloves, an N-95 face mask, a bottle of water to spray over affected areas, a cleaning mix to remove mold (it can be a combination of bleach and water), and a brush so you can scrub the contaminated areas.
#3. Get the work area ready Isolate your work area: put your personal stuff away from the moldy surfaces. What cannot be removed – cover fully with sheets of plastic (use a duct tape to make sure these areas won’t be contaminated with mold) or polyethylene sheeting.
Close all doors and windows near the work area to minimize the risk of mold spores spreading. Make sure you put on protecting clothing.
#4. Start removal Use bleach-and-water solution for mold remediation Boca Raton (put it in a spray bottle). Scrub moldy surfaces with a rag or a brush. Pay attention to materials which can’t be removed and scrub them heavily to get rid of mold as much as possible.
Let it dry so moisture can evaporate. To make the process faster, you can use fans or increase the temperature in your house.
#5. Define whether the removal has been effective Even if all surfaces are clean and dry, it doesn’t mean you’ll get rid of mold 100%. So, look closely and determine if there are any signs of water damage which repeats again.
Also, check for visible mold, moldy materials as well as moldy odors. If there are any, your clean up procedure has been successful.
Keep in mind that in the future you need to prevent the mold issue. The only way is to control moisture. Mold usually appears on surfaces in attics, bathrooms, and walls with water leaks from outside your home.
If your basement has a poor foundation, prepare yourself to face with the mold problem sooner or later.
What you can do: stop water leaks, provide effective ventilation in the attic, keep your bathroom as dry as possible, and make sure there is no water near the foundation.
The most reliable and efficient way to get rid of mold is hiring professionals. They conduct rigorous mold testing and use the latest removal processes and equipment to get rid of mold once and forever!
Want to know more? Check expressemergency.com right away!