QuickCAM Pro Advanced Milling CAM Software
3D Model  Training Guide QuickCAM Pro (V1.13) VR Milling (V5.61)
Contents About Introduction Launching QuickCAM Pro Navigating QuickCAM Pro Opening your Model Orientating the Model Set Cut Depth Set Billet Size Set Model Size Set Model Position Set Boundary Setup Tools Machining Plans Raster Roughing Raster Finishing Pencil Milling Toolpath Simulation CNC File Output Datum Position Post Process VR Milling V5
4 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 20 21 22
About QuickCAM Pro QuickCAM Pro is an advanced, yet simple to use, wizard based CAM package, which is used to create cutter paths for machining 3D parts on a milling machine or router. Both STL files and image files can be imported into QuickCam Pro, and a comprehensive set of machining plans can be used individually or in combination to produce complex 3D surfaces and lithophanes.
Introduction The aim of this training guide is to teach you how to navigate your way around QuickCAM Pro and instruct you how to operate this software to manufacture a part on your Denford Router or Mill from a 3D model. This guide makes use of screen shots where possible and will use the following conventions: Instructions will be in this format
Text to be typed will be in this format
Any software buttons to be pressed, a picture of the button will follow the instruction This guide assumes that your software has already been installed and your machine has been commissioned. If any of the features described in this guide are not operating as described please check that the version number you are using is the same as that shown on the front cover. Version is written on the title bar of the main software window. Denford provide machine training and it is recommended that you undertake the training and use this guide as a revision guide after completion of the machine training.
4 of 24
QuickCAM Pro - 3D Model Training Guide
Launching QuickCAM Pro Open the "Denford Applications" folder. "Double click" on the QuickCAM Pro icon.
The screen shown on the right will be displayed and the software will take a minute or 2 to open. You can force the software to open quicker by following the next instruction. "Double click" on the area circled below.
The software will open and you will be greeted with the screen below.
5 of 24
QuickCAM Pro - 3D Model Training Guide
Navigating QuickCAM Pro QuickCAM Pro is very easy to use, the main screen displays what is going on and the navigation panel on the right is how you select options and move around this wizard based program. The left mouse button allows you to rotate the main display and the right mouse button allows you to zoom in and out.
The 3 buttons here are: The toolbar has various options, you should not need to use them for this tutorial.
For this tutorial you will be using the button This information box contains instructions on each screen.
The next and previous buttons allow you to move backwards and forwards through the wizard Information hear tells you the dimansions of your model and dimensions of your billet.
6 of 24
QuickCAM Pro - 3D Model Training Guide
Opening your Model Select the 3D Model button
Select the .STL file you wish to machine and click the open button Your model will now be displayed in the main screen. You can hold the left mouse button to rotate your model, holding the right mouse button zooms in and out. A new button has appeared, this is the invert button You can use this to invert your model if wanting to make a mould.
Click the next button
7 of 24
QuickCAM Pro - 3D Model Training Guide
Orientate the Model There are a number of ways to orientate the model, there is no right or wrong way as long as the billet in the machine is aligned the same way. The large red arrow represents the direction that the cutting tool will come from. The TeddyBear.stl model is not a full 3D model and has a flat underside, the original orientation is the one we will use for this tutorial so do not rotate in the X, Y or Z axis. For other models you may want to rotate the model, you can either type an angle in the text editor next to each axis or you can click the direction arrows; the direction arrows move the model in 90 degree increments.
When your model is correctly orientated, click the Next button
8 of 24
QuickCAM Pro - 3D Model Training Guide
Set the Cut Depth This screen allows you to set the cut depth
Adjusting the cut depth will set how deep the cut goes, it also slices the model at this depth so imagine that everything below the set depth has been deleted. Click the Bottom button Click the Next button
9 of 24
QuickCAM Pro - 3D Model Training Guide
Set Billet Size This screen is where we set the size of the billet.
For this tutorial we are using the High Density Foam (BI03508A) billets. Click in the X dialogue box and type
150
Click in the Y dialogue box and type
110
Click in the Z dialogue box and type
45
Click the Next button
1 0 of 24
QuickCAM Pro - 3D Model Training Guide
Set Model Size This screen allows you to set the size of the model.
Having designed your model to a certain size you will most likely want to cut it out the same size. Check that the scale is set to 100%
Click the Next button
11 of 24
QuickCAM Pro - 3D Model Training Guide
Set Model Position This screen is where you set the position of your model within the billet.
It is very important to get this correct if you are going to be cutting the billet on multiple sides, as we will only be cutting the Teddy Bear from the top down it is not as critical. The Z position should be thought of as raising or lowering the model within the billet, if the top surface of the billet is damaged having the model at the top would transfer this damage to the model. We should lower the model a couple of mm. Set the top dialogue box to 2mm
The X position moves the model left or right, we will leave the model in the middle. The Y position moves the model from front to back, we will leave the model in the middle. The image below shows the navigation controls for the X and Y axis. Selecting a direction arrow will move the model to the extreme of the billet in that direction. Click the Centre button Click the Next button
1 2 of 24
QuickCAM Pro - 3D Model Training Guide
Set Boundary This screen is where you can set the boundary.
If the boundary is set to the Billet then all material will be removed, if the boundary is set to the model some detail around the edges of the model will be lost as the tool cannot fit. This is where the Extend Model Boundary option comes in useful. Click the Model button
Extend the Model Boundary by 7mm (we will use a 1/4" cutter)
Click the Next button
1 3 of 24
QuickCAM Pro - 3D Model Training Guide
Setup Tools Manufacture of the High Density Foam is best done with the 1/4" (6.35mm) Long series Ball足nose cutter as it has a 40mm flute and will have about 50mm of length sticking out from the spindle nut. Using this cutter should prevent any clearance issues, the last thing you want to do is run the spindle nut into your model. The screen below is where you set足up tools.
This screen takes the tooling information from VR Milling V5, as long as you have set the 1/4" Ball足nose in VR Milling V5 it should be showing here. Click on the 1/4" (6.35mm) Ball足nose
The tool number should highlight in light blue Click the next button
1 4 of 24
QuickCAM Pro - 3D Model Training Guide
Machining Plans The screen below is where you create your machining plans having already instructed QuickCAM Pro on the size of your billet and the position and orientation of your model within it.
Click the Add button The window below will pop up.
Here you have a choice of 3 roughing plans, 6 finishing plans, and 3 fine finishing plans. Right clicking each plan will launch a help file to describe how each plan works. For this tutorial we will use a Raster Roughing, a Raster Finishing, and a Pencil Milling plan.
1 5 of 24
QuickCAM Pro - 3D Model Training Guide
Raster Roughing Click the Raster Roughing button The window below will appear
Set the parameters below
Click the OK button
1 6 of 24
QuickCAM Pro - 3D Model Training Guide
Raster Finishing Click the Raster Finishing button The window below will appear
Set the parameters below
Click the OK button
1 7 of 24
QuickCAM Pro - 3D Model Training Guide
Pencil Milling Click the Pencil Milling button The window below will appear
Set the parameters below
Click the OK button
1 8 of 24
QuickCAM Pro - 3D Model Training Guide
You should now have created 3 machining plans and your screen should look like the image below.
Click the Next button
Toolpath Simulation The Toolpath Simulation screen should appear and you can see a visual simulation of the toolpath.
Click the Play button to run the simulation. Click the Next button
1 9 of 24
QuickCAM Pro - 3D Model Training Guide
CNC File Output The CNC Output screen is where the datum position is set and the post processor is chosen before creating the program.
Datum Position By default the datum position is set to X0, Y0, and Z0, this is the top surface of the billet in the bottom left corner. You can change the datum position, which is something you may wish to do if you plan on machining the billet on more than one face. Generally when planning to rotate the billet a fixture will be made for this and the datum position will be set on the axis of rotation. For this tutorial we will use the default position. Set Datum Position to X0, Y0, and Z0
20 of 24
QuickCAM Pro - 3D Model Training Guide
Post Process QuickCAM Pro has post processors for a number of different CNC machines, hitting the drop down button will display the full list. For the current range of Denford CNC machines the post processor is called Denford (Metric) Â Milling Select Denford (Metric) Â Milling Click the Post Process button The Save As window will appear.
Enter a file name Click the Save button
21 of 24
QuickCAM Pro - 3D Model Training Guide
VR Milling V5 VR Milling V5 will now open and your saved program will be open in the Editor window. You should now fix the billet onto the bed of the router and set the offsets.
Fixing the Billet There are a number of ways in which you can fix the billet to the bed of the router, with foam the easiest is to use Heavy Duty Double Sided Tape (BI03502B) to hold it down.
Setting the Offset Once the billet is fixed in the router the offset needs to be set as the router cannot see the billet. The offset position is the same as the datum position, which you set in QuickCAM Pro. For this tutorial it should be X0, Y0, and Z0 Set the offset You are now ready to run the program and cut out the TeddyBear.
22 of 24
QuickCAM Pro - 3D Model Training Guide