CopertinaVetroINGLESE
6-09-2005
8:12
Pagina 1
VETRO / GLASS
Tool holders catalogue Parts of your business
CopertinaVetroINGLESE
6-09-2005
8:12
Pagina 2
Tool holders catalogue Parts of your business September 2005 3rd edition
6-09-2005
8:12
Pagina 4
www.avantee.com
CopertinaVetroINGLESE
via Vittorio Emanuele, 103 12048 Sommariva Bosco (CN) Italy Tel. +39 0172 54015 Fax +39 0172 54014 www.ims.sh | ims@ims.sh
CatalogoVetroINGLESE
5-09-2005
20:05
Pagina 1
Index
2-3
Tool holders ISO 40 type “Bavelloni” and “Pedrini”
4-5
Tool holders ISO 40 type “Brembana” new type
6-7
Tool holders ISO 40 type DIN 69871/A
8-9
Tool holders ISO 40 type “Intermac” and “Bimatech”
10-11
Tool holders ISO 30 type “Intermac” and “Bimatech”
12-13
Tool holders ISO 40 type “Lovati”
14-15
Tool holders ISO 40 type “VEM”, “Thibaut”, “Hellios”, “Park Industries”
16-17
Tool holders with coupling 1/2 Gas
18
Collet chuck 2/10-3/16-3/20-3/26 type ER 16-25-32-40 DIN 6499B
19
Ring nut for collet chuck holder
20
Digital height measuring device
21
Petal collets type SSK-DIN
22
Petal collets type SSK-ANSI
23
Petal collets type SSKK-DIN
24
Petal collets type SSKK-ANSI
25
Pull stud angle 15° DIN 69872
26
Realease kit
27
Fingers
28
Test bar
29
Tool holders for diamond powders
30
Cone cleaner
31
Trolley
32
Protective treatments
CatalogoVetroINGLESE
5-09-2005
20:05
Pagina 2
2
Tool holders ISO 40 Type “Bavelloni” and “Pedrini” Grinding wheel holder Code MVBA111 MVBA122 MVBA112 MVBA123 MVBA113 MVBA114 MVBA124 MVBA115 MVBA125 MVBA116 MVBA117 MVBA121 C MVBA126 L
A 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1
D 22 22 22 22 22 35 35 35 35 35 45 50 50
L 20 34 39 47 80 20 34 39 47 80 45 5 5
L1 10 10 10 10 10 10 10 10 10 10 15,9 30,9 6 holes 75 6 holes
Locking kit Kit made up of 2 spacer rings, 1locking washer, 1 stainless steel or zinc-coated locking screw. Code M200 M202 M210 M220 M230
d 22 22 35 45 50
D 60 60 65 98 98
E 45 45 45 78 60
M 10 10 12 M16 1/2"
S 3 5 3 3 3
Pull stud Code MVBA900 MVIN900
Type M16 angle 15° Pedrini
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
CatalogoVetroINGLESE
5-09-2005
20:05
Pagina 3
3
Tool holders ISO 40 Type “Bavelloni” and “Pedrini”
Drill point holder Code MVBA101 MVBA106
A 19,1 19,1
M 1/2" M30
D 50 50
L1 50 50
D 50 63
L 72,5 72,5
ER collet chuck holder Code MVBA131 MVBA132
A Collet type 19,1 ER32 19,1 ER40
For ER collets see page 18 For wrenches see page 19 For ring nuts see page 19
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
CatalogoVetroINGLESE
5-09-2005
20:05
Pagina 4
4
Tool holders ISO 40 Type “Brembana” new type Grinding wheel holder Code MVBR111NT MVBR122NT MVBR112NT MVBR123NT MVBR113NT MVBR114NT MVBR124NT MVBR115NT MVBR125NT MVBR116NT MVBR117NT MVBR121NT C MVBR126NT L
A 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1
D 22 22 22 22 22 35 35 35 35 35 45 50 50
L 20 34 39 47 80 20 34 39 47 80 45 5 5
L1 50 50 50 50 50 50 50 50 50 50 50 30,9 6 fori 75 6 fori
Locking kit Kit made up of 2 spacer rings, 1locking washer, 1 stainless steel or zinc-coated locking screw. Code M200 M202 M210 M220 M230
d 22 22 35 45 50
D 60 60 65 98 98
E M S 45 10 3 45 10 5 45 12 3 78 M16 3 60 1/2" 3
Pull stud Code MVBR900
Type M16 angle 15°
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
CatalogoVetroINGLESE
5-09-2005
20:05
Pagina 5
5
Tool holders ISO 40 Type “Brembana” new type
Drill point holder Code MVBR101NT MVBR106NT
A 19,1 19,1
Size 1/2" M30
D 50 50
L1 50 50
ER collet chuck holder Code MVBR131NT MVBR132NT
A 19,1 19,1
Collet type D ER32 50 ER40 63
L1 53,40 57,15
For ER collets see page 18 For wrenches see page 19 For ring nuts see page 19
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
CatalogoVetroINGLESE
5-09-2005
20:05
Pagina 6
6
Tool holders ISO 40 Type DIN 69871/A Grinding wheel holder Code MVDIN411 MVDIN422 MVDIN412 MVDIN423 MVDIN413 MVDIN414 MVDIN424 MDVIN415 MDVIN425 MDVIN416 MDVIN417 MVDIN421 C MVDIN426 L
A 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1 19,1
D 22 22 22 22 22 35 35 35 35 35 45 50 50
L 20 34 39 47 80 20 34 39 47 80 45 5 5
L1 15,9 15,9 15,9 15,9 15,9 15,9 15,9 15,9 15,9 15,9 15,9 30,9 6 fori 75 6 fori
Locking kit Kit made up of 2 spacer rings, 1 locking washer, 1 stainless steel or zinc-coated locking screw. Code M200 M202 M210 M220 M230
d 22 22 35 45 50
D 60 60 65 98 98
E 45 45 45 78 60
M 10 10 12 M16 1/2"
S 3 5 3 3 3
Pull stud Code MVDIN900
Type M16 angle 15°
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
CatalogoVetroINGLESE
5-09-2005
20:05
Pagina 7
7
Tool holders ISO 40 Type DIN 69871/A
Drill point holder Code MVDIN401 MVDIN406
A 19,1 19,1
Size 1/2" M30
D 50 50
L1 50 50
D 50 63
L 53,4 57,4
ER collet chuck holder Code MVDIN431 MVDIN432
A 19,1 19,1
Collet type ER32 ER40
For ER collets see page 18 For wrenches see page 19 For ring nuts see page 19
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
CatalogoVetroINGLESE
5-09-2005
20:05
Pagina 8
8
Tool holders ISO 40 Type “Intermac” and “Bimatech” Grinding wheel holder Code MVIN111 MVIN122 MVIN112 MVIN123 MVIN113 MVIN113/B MVIN114 MVIN124 MVIN115 MVIN125 MVIN116 MVIN117 MVIN121 C MVIN126 L
A 25 25 25 25 25 25 25 25 25 25 25 25 25 25
D 22 22 22 22 22 22 35 35 35 35 35 45 50 50
L 20 34 39 47 80 90 20 34 39 47 80 45 5 6 fori 5 6 fori
Locking kit Kit made up of 2 spacer rings, 1 locking washer, 1 stainless steel locking screw. Code V200 V202 V210 V211* V212** V220 V230
d 22 22 35 35 35 45 50
D 60 60 60 60 60 65 98
E 45 45 45 45 45 78 60
S 5 5 3 3 3 3 9
D M 10 10 12 10 10 16 1/2
D
*
**
Pull stud Code MVIN900* MVBM900**
Type “INTERMAC” “BIMATECH”
** **
*
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
*
CatalogoVetroINGLESE
5-09-2005
20:05
Pagina 9
9
Tool holders ISO 40 Type “Intermac” and “Bimatech”
Drill point holder Code MVIN101 MVIN106
A 25 25
Size 1/2" M30
ER collet chuck holder Code MVIN131 MVIN132
A 25 25
Collet type D ER32 50 ER40 63
L 52,5 56,5
For ER collets see page 18 For wrenches see page 19 For ring nuts see page 19
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
CatalogoVetroINGLESE
5-09-2005
20:05
Pagina 10
10
Tool holders ISO 30 Type “Intermac” and “Bimatech” Grinding wheel holder Code MVIN309 MVIN310 MVIN311 MVIN322 MVIN312 MVIN323 MVIN313 MVIN313/B
A 25 25 25 25 25 25 25 25
D 13 13 22 22 22 22 22 22
L 23 34 20 34 39 47 80 90
Locking kit Kit made up of 2 spacer rings, 1 locking washer, 1 stainless steel locking screw. Code M200 M202 M210 M211 M212 M220 M230
d 22 22 35 35 35 45 50
D 60 60 60 60 60 65 98
E 45 45 45 45 45 78 60
S 5 5 3 3 3 3 9
M 10 10 12 10 10 16 1/2
Pull stud Code MVIN300
Type INTERMAC
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
CatalogoVetroINGLESE
5-09-2005
20:05
Pagina 11
11
Tool holders ISO 30 Type “Intermac” and “Bimatech”
Drill point holder Code MVIN301 MVIN306
A 25 25
Size 1/2" M30
ER collet chuck holder Code MVIN331 MVIN332
A 25 25
Collet type D ER32 50 ER40 63
L 52,5 56,5
For ER collets see page 18 For wrenches see page 19 For ring nuts see page 19
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
CatalogoVetroINGLESE
5-09-2005
20:05
Pagina 12
12
Tool holders ISO 40 Type “Lovati” Grinding wheel holder Code MVLO111 MVLO122 MVLO112 MVLO123 MVLO113 MVLO114 MVLO114 B MVLO119 MVLO124 MVLO115 MVLO125 MVLO116 MVLO117 MVLO121 C MVLO126 L
A 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25
D 22 22 22 22 22 22 25 35 35 35 35 35 45 50 50
L 20 39 40 47 80 20 20 25 34 39 47 80 45 5 5
L1 51 51 51 51 51 51 51 51 51 51 51 51 51 30,9 75
6 holes
6 holes 6 holes
Locking kit Kit made up of 2 spacer rings, 1 locking washer, 1 stainless steel locking screw. Code M200 M202 M210 M220 M230
D 60 60 65 98 98
E 45 45 45 78 60
M 10 10 12 M16 1/2
S 3 5 3 3 3
Pull stud Code MVLO900
Type M16 angle 15°
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
CatalogoVetroINGLESE
5-09-2005
20:05
Pagina 13
13
Tool holders ISO 40 Type “Lovati”
Drill point holder Code MVLO101 MVLO105 MVLO106
A 25 25 25
Size 1/2” 1/2” M30
D 45 50 50
L 26 50 50
D 50 63
L 53,40 57,15
ER collet chuck holder Code MVLO131 MVLO132
A 25 25
Collet type ER32 ER40
For ER collets see page 18 For wrenches see page 19 For ring nuts see page 19
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
CatalogoVetroINGLESE
5-09-2005
20:05
Pagina 14
14
Tool holders ISO 40 BT Type “VEM”, “Thibaut”, “Hellios”, “Park Industries” Grinding wheel holder Code MVVE111 MVVE122 MVVE112 MVVE123 MVVE113 MVVE114 MVVE115 MVVE124 MVVE125 MVVE116 MVVE117 MVVE121 C MVVE126 L
A 27 27 27 27 27 27 27 27 27 27 27 27 27
D 22 22 22 22 22 35 35 35 35 35 45 50 50
L 20 34 39 47 80 20 34 39 47 80 45 5 5
6 fori 6 fori
Locking kit Kit made up of 2 spacer rings, 1 locking washer, 1 stainless steel or zinc-coated locking screw. Code M200 M202 M210 M220 M230
d 22 22 35 45 50
D 60 60 65 98
E 45 45 45 78 60
M 10 10 12 M16 1/2"
S 3 5 3 3 3
Pull stud Code MVVE900
Type M16 angle 45°
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
CatalogoVetroINGLESE
5-09-2005
20:05
Pagina 15
15
Tool holders ISO 40 BT Type “VEM”, “Thibaut”, “Hellios”, “Park Industries”
Drill point holder Code MVVE101 MVVE103 MVVE106
A 27 27 27
Size 1/2" 1/2" M30
D 45 50 45
L1 23 50 23
ER collet chuck holder Code MVVE131 MVVE132
A 27 27
Collet type D ER32 50 ER40 63
L1 72,5 76,25
For ER collets see page 18 For wrenches see page 19 For ring nuts see page 19
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
CatalogoVetroINGLESE
5-09-2005
20:05
Pagina 16
16
Tool holders with coupling 1/2 Gas
Grinding wheel holder Code MV12G212 MV12G213 MV12G215 MV12G216 MV12G217
A 20 20 20 20 20
D 22 22 35 35 45
L 39 80 39 80 45
Locking kit Kit made up of 2 spacer rings, 1 locking washer, 1 stainless steel or zinc-coated locking screw. Code M200 M202 M210 M220 M230
d 22 22 35 45 50
D 60 60 65 98 98
E 45 45 45 78 60
M 10 10 12 M16 1/2"
S 3 5 3 3 3
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
CatalogoVetroINGLESE
5-09-2005
20:05
Pagina 17
17
Tool holders with coupling 1/2 Gas
Drill point holder Code MV101 MV102 MV106 MV109
Size 1/2" 1/2” M30 M30
D 40 40 40 40
L1 80 120 80 120
ER collet chuck holder Code MV12G100 MV12G160 MV12G170
Collet type ER16 ER25 ER32
D 22 42 50
L1 40 40 50
STAINLESS STEEL TOOL HOLDERS finish their code with an extra “I”. Special tool holders are made on request.
CatalogoVetroINGLESE
5-09-2005
20:05
Pagina 18
18
Collet chuck 2/10-3/16-3/20-3/26 Type ER 16-25-32-40 DIN 6499B
ER16
ER25
Collets code cap. 2-10 D 99832AN 99834BN 99836CN 99838DN 99840EN 99842FN 99844GN 99846HN 99848LN 99850MN
99851N
17 17 17 17 17 17 17 17 17 17
L 27,5 27,5 27,5 27,5 27,5 27,5 27,5 27,5 27,5 27,5
10 collets series
Collets code cap. 3-16 D
L
99901AN 99902BN 99903CN 99904DN 99905EN 99906FN 99907GN 99908HN 99909LN 99910MN 99911NN 99912PN 99913QN 99914RN
35 35 35 35 35 35 35 35 35 35 35 35 35 35
99915T
ER40
ER32
26 26 26 26 26 26 26 26 26 26 26 26 26 26
14 collets series
Collets code cap. 3-20 D
L
99916SN 99917TN 99918VN 99919ZN 99920AN 99921BN 99922CN 99923DN 99924EN 99925FN 99926GN 99927HN 99928LN 99929MN 99930NN 99931PN 99932QN 99933RN
40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40
99934B
33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33 33
18 collets series
Collets code cap. 3-26 D
L
99936VN 99937ZN 99938AN 99939JN 99940BN 99941CN 99942DN 99943EN 99944FN 99945GN 99946HN 99947LN 99948MN 99949NN 99950PN 99951QN 99952RN 99953SN 99954TN 99955VN 99956ZN 99957WN 99959AN
46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46 46
99958C
These collets are coated with anticorrosion niploy. Special tool holders are made on request.
41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41
23 collets series
d 2-1 3-2 4-3 5-4 6-5 7-6 8-7 9-8 10-9 11-10 12-11 13-12 14-13 15-14 16-15 17-16 18-17 19-18 20-19 21-20 22-21 23-22 24-25 25-26 26-27
CatalogoVetroINGLESE
5-09-2005
20:05
Pagina 19
19
Ring nut for collet chuck holder
Right ring nuts Code W986DN W987DN W990DN W993DN
Collet type ER16 ER25 ER32 ER40
Size 01-10 mini 03-16 03-20 04-26
Wrench Code 97730S 97731A 97733B 97735C
Special tool holders are made on request.
Collet ER16 mini ER25 ER32 ER40
CatalogoVetroINGLESE
5-09-2005
20:05
Pagina 20
20
Digital height measuring device
1- Measuring range 12� / 300 mm 2- Counter zero-adjustment at any height within the measuring range 3- Precision 0,0005� / 0,01 mm 4- Selector in inches/millimeters
CODE M101 M102
CONE-SHAPED BASE ISO 30 ISO 40
Special tool holders are made on request.
CatalogoVetroINGLESE
5-09-2005
20:05
Pagina 21
21
Petal collets Type SSK-DIN
CODE ISO ØA H7
ØB
ØD ØR min
AG
g
mm
mm
mm
mm
mm
M10
...
mm
P1102 30 19 17,8(+0,1) 19,5 24
P1104 40 28 26,4(+0,1) 28,5 35 M16x1,5 M8
L P min
N
mm mm mm
T
Z
V
Øn
C
Hstd
FS max
M
EX
mm
mm
mm
mm
mm
mm
kN
Nm
mm
37(-0,1) 7,5
3,5
4
19,5
3,5
10
30
6
4,5
7
34
5
18
65
8
50
47
20
76
65
22 43,5(-0,1) 9
Special tool holders are made on request.
CatalogoVetroINGLESE
5-09-2005
20:05
Pagina 22
22
Petal collets Type SSK-ANSI
CODE ISO ØA H7
ØB
ØD ØR min
AG
g
mm
mm
mm
mm
mm
M10
...
mm
P1112 30 19 17,8(+0,1) 19,5 24
P1114 40 19 26,4(+0,1) 28,5 35 M16x1,5 M8
L P min
N
mm mm mm
T
Z
V
Øn
C
Hstd
FS max
M
EX
mm
mm
mm
mm
mm
mm
kN
Nm
mm
37(-0,1) 7,5
3,5
4
33
2,5
10
30
6
4,5
7
44,8
4,2
18
65
8
50
47
20
76
65
22 43,5(-0,1) 9
Special tool holders are made on request.
CatalogoVetroINGLESE
5-09-2005
20:05
Pagina 23
23
Petal collets Type SSKK-DIN
CODE ISO ØA H7
ØB
ØD ØR min
AG
g
mm
mm
mm
mm
mm
M10
...
mm
P1122 30 19 17,8(+0,1) 19,5 24
P1124 40 28 26,4(+0,1) 28,5 35 M16x1,5 M8
L P min
N
mm mm mm
T
Z
V
Øn
C
Hstd
FS max
M
EX
mm
mm
mm
mm
mm
mm
kN
Nm
mm
37(-0,1) 7,5
3,5
4
20,5
2,5
10
30
6
4,5
7
35,5
3,5
18
65
8
50
47
20
76
65
22 43,5(-0,1) 9
Special tool holders are made on request.
CatalogoVetroINGLESE
5-09-2005
20:05
Pagina 24
24
Petal collets Type SSKK-ANSI
CODE ISO ØA H7
ØB
ØD ØR min
AG
g
mm
mm
mm
mm
mm
mm
P1134 40 28 26,4(+0,1) 28,5 35 M16x1,5 M8
L P min
N
mm mm mm
76
65
T
Z
V
Øn
C
Hstd
FS max
M
EX
mm
mm
mm
mm
mm
mm
kN
Nm
mm
4,5
7
45,5
3,5
18
65
8
22 43,5(-0,1) 9
Special tool holders are made on request.
CatalogoVetroINGLESE
5-09-2005
20:05
Pagina 25
25
Pull stud angle 15째 DIN 69872
CODE
ISO
d1
d2
d3
d4
d5
d6
l1
l2
l3
l4
l5
s
140002Y
30
13
9
17
13
M12
3
44
24
19
15
4
14
140006U
40
19
14
23
17
M16
7
54
26
20
21
4
19
Special tool holders are made on request.
CatalogoVetroINGLESE
5-09-2005
20:05
Pagina 26
26
Release kit
CODE P2002 P2004
ISO 30 40
A
C B E D
KIT COMPOSITION: A B C D E
Special tool holders are made on request.
- Pneumatic lungs - Set of bower springs - Connecting rod - Spacer - Stopping device for bower springs
CatalogoVetroINGLESE
5-09-2005
20:05
Pagina 27
27
Fingers
Holding devices for tool holders on the machine loader.
These devices are costum-made according to machine manufacturers’ drawings.
Special tool holders are made on request.
CatalogoVetroINGLESE
5-09-2005
20:05
Pagina 28
28
Test bar Bar for testing machine electric mandrel precision.
Code VISO30 VISO40
Cone ISO30 ISO40
D 30 40
L 300 300
Special tool holders are made on request.
CatalogoVetroINGLESE
5-09-2005
20:05
Pagina 29
29
Tool holders for diamond powders Prices for diamond electrodeposition for drill points and corers. Beyond studied products, we make pieces on drawing too.
Drill points Code V 1004 V 1006 V 1008 V 1010 V 1012 V 1014 V 1016 V 1018 V 1020 V 1022 V 1024 V 1026 V 1028 V 1030
D 4 6 8 10 12 14 16 18 20 22 24 26 28 30
L 80 80 80 80 80 80 80 80 80 80 80 80 80 80
D 40 50 60 80 100 150 180 200
L 60 80 100 100 100 100 100 100
Corers Code V2040 V2050 V2060 V2080 V2100 V2150 V2180 V2200
Special tool holders are made on request.
CatalogoVetroINGLESE
5-09-2005
20:05
Pagina 30
30
Cone cleaner
It easly and rapidly cleans the machine cone. Special cotton strips for avoiding damages to the machine cone.
Code Description VEVTW30 ISO 30 VEVTW40 ISO 40
Special tool holders are made on request.
CatalogoVetroINGLESE
5-09-2005
20:05
Pagina 31
31
Trolley
TOOL HOLDERS BACK ANGLE PLATE
It is made up of fire painted sheet and (during the assembly phase) it is possible to set one or more levels. On one of the two sides there is an angle plate for holding wrenches and other tools. It is available in the following versions: VEVTT-2 ISO 30 • VEVTT-2 ISO 40
Special tool holders are made on request.
CatalogoVetroINGLESE
5-09-2005
20:05
Pagina 32
32
Protective treatments
NIPLOY Coolants used in processing marble, glass and stone are a mixture of water and chemicals. While coolants are effective inaiding the processing of the products, these chemical agents are highly corrosive to metal. To avoid these oxidation and corrosion problems, every exposed surface of our tool holders are coated with “niploy�, a special process based on the chemical deposition of nikel. This nikel coating process leaves micro-particles on the surface of the tapered cones that are not measurable with standard tools.
Niploy coating
COD. MVOO1
Grinding operation after niploy coating
COD. MVOO2
STAINLESS STEEL TOOL HOLDERS To avoid corrosion due to the coolant, tool holders are made in stainless steel in a special alloy. This particular alloy has magnetic properties; with the interaction of the coolant become yellow for oxidation but the rust do not penetrate deeply.
Special tool holders are made on request.
19-04-2008
19:54
Pagina 4
Graphic design: www.rossanoadv.com
CopertinaMarmoINGLESE2008.qxd:Layout 1
via Vittorio Emanuele, 103 12048 Sommariva Bosco (CN) Italy Tel. +39 0172 54015 Fax +39 0172 54014 www.ims.eu | ims@ims.eu