Additive Manufacturing: Transforming Military Logistics

ADDITIVE MANUFACTURING

TRANSFORMING MILITARY LOGISTICS

By Craig Collins

In November 2016, when the Department of Defense (DOD) released its first Additive Manufacturing Roadmap, the document began with a sentence that has proven to be something of an understatement: “Additive manufacturing (AM), which includes the commonly used term ‘3D printing,’ is a rapidly growing and changing discipline.”

It’s been less than three years since then. While much of the world continues to think of AM technology as a convenient way to make sturdy plastic objects from 3D printers, military personnel at all levels have been pushing its limits far beyond what most imagined possible. Within that interval, these are just a few of the solutions produced by the military and its partners:

• At the Oak Ridge National Laboratory, the Disruptive Technologies Laboratory of the Naval Surface Warfare Center produced the military’s first 3D-printed submarine hull, a 30-foot submersible hull inspired by the SEAL Delivery Vehicle. Compared to a traditional SEAL submarine hull, which costs up to $800,000 and takes three to five months to manufacture, the six carbon-fiber sections of the new prototype were built in four weeks and assembled at a cost of $60,000.

• At the Picatinny Arsenal in New Jersey, at the facility now known as the Combat Capabilities Development Command (CCDC) Armaments Center, the Army unveiled a grenade launcher, the Rapid Additively Manufactured Ballistics Ordnance (RAMBO), a modified version of the older M203 launcher. RAMBO consists of 50 separate parts, each of which, except for the springs and fasteners, was built through an additive manufacturing process. The materials used for these parts include plastic, aluminum, and 4340 alloy steel.

• Maintainers at Hill Air Force Base in Utah installed a 3D-printed bracket, made of titanium, on an operational F-22 Raptor. The corrosion-resistant part was used to replace an aluminum bracket in the kick panel of the aircraft cockpit. It was the Air Force’s first operational use of a metallic 3D-printed part on an F-22, and happened just months after the service’s Rapid Sustainment Office installed 17 printed parts, including both polymer and metal components, on a C-5 Super Galaxy aircraft.

• With the use of a gantry-mounted concrete printer jointly developed by the Army’s Engineer Research and Development Center (ERDC), NASA, and Caterpillar, Marines, soldiers, and Navy Seabees built a 500-square-foot hardened living space – a barracks – in just 40 hours at ERDC’s Construction Engineering Research Laboratory in Champaign, Illinois. The printer is a joint Marines/Army initiative known as Automated Construction of Expeditionary Structures, or ACES. Months later, the 1st Marine Logistics group, with the help of the Marine Corps Systems Command, the Army Corps of Engineers, and Navy Seabees, used the ACES printer to build a functional concrete footbridge in 14 hours, the first 3D-printed bridge in the western hemisphere, at Camp Pendleton, California.

• At the Institute for Soldier Nanotechnologies at the Massachusetts Institute of Technology (MIT), a research team supported by the National Science Foundation and the Office of Naval Research used additive manufacturing to produce soft, pliable nanostructures that can be manipulated when magnetized. The 3D-printed nanobots, which can be made to roll, crawl, jump, and grab, may someday be used as magnetically controlled biomedical devices.

Few technologies are as vigorously hyped throughout the military as additive manufacturing, for good reason: The ability to produce components on demand, at the point of need, will transform logistics, reduce material waste, and enable customization, all at a fraction of the costs and times involved in the manufacturing process that traditionally feeds military resupply and acquisitions.

Titanium parts printed from powder and a laser provide researchers with highstrength, heat-resistant examples of the future of additive manufacturing.

U.S. Army Photo By David McNally

AM is already being viewed as a possible alternative means of tackling problems unsolved by current budget levels: In the spring of 2019, the Navy’s Information Warfare Research Project Consortium issued a solicitation asking industry to use AM and innovative technologies to develop the Marines’ next amphibious transport, an item that was zeroed out of the most recent defense appropriation. Such possibilities have serious implications for defense critical replacement parts, or even living quarters – but we’re not there yet. There are still a few hurdles to clear, both technical and organizational.

The Technology

The term “additive manufacturing” is used to distinguish the technology from more traditional “subtractive” methods, which form objects by cutting away from a piece of raw material and tooling it to achieve a finished product. While there are now several different types of AM, each forms an object in the same basic way: A programmed machine adds material, layer by layer, until a three-dimensional object is formed. The first 3D printing machines, produced in the 1980s, created objects out of thermoset polymers. Today’s machines can infuse these polymers with materials such as Kevlar, carbon fiber, and fiberglass, and also print objects made from a variety of materials including metals, ceramics, paper, food, and even living cells, introducing the possibility of printing human organs for transplant.

Marines from I Marine Expeditionary Force learn how to operate the world’s largest concrete 3D printer as it constructs a 500-square-foot barracks hut at the U.S. Army Engineer Research and Development Center in Champaign, Illinois.

Courtesy Photo Marine Corps Systems Command

Initiatives such as the ACES program, which involves three military branches, NASA, and a private company, illustrate how the DOD achieves technical advances through collaboration. Innovations are made all the time by operational components such as the CCDC Armament Center, which owns more than 25 3D printers, including five contained within the mobile R-FAB system, a 3D printing lab in a shipping container. The R-FAB was recently deployed to U.S. Army Garrison Humphreys in South Korea, where machines have been used to print a number of replacement parts, mines, and mortar shells.

While these innovations are happening throughout the Defense Department, they are often nurtured by the military’s foundational research programs in additive manufacturing, conducted at the service branch corporate research laboratories – the CCDC Army Research Laboratory (ARL), the Naval Research Laboratory (NRL), and the Air Force Research Laboratory (AFRL) – often in collaboration with other service elements.

Much of this foundational research takes the form of exploring new materials, but as Dr. Joseph South, who leads the ARL’s AM-focused Essential Research Program, pointed out, it also involves investigating ways a process can be altered in order to produce different material characteristics. For example, by controlling the processing parameters in a laser powder bed fusion machine (LPBF) – a 3D printer that uses metal powder to build objects – a user can modulate the laser power and scan strategy to control the microstructure, and thus the strength and hardness, of the printed object. Team members in ARL’s Manufacturing Science and Technology Branch recently used a LPBF to produce an impeller fan used in the powertrain of an M1 Abrams tank.

A print head from the Automated Construction of Expeditionary Structures (ACES), a 3D printer, applies a layer of concrete with aggregate to a wall section of the additive manufactured barracks hut at the Construction Engineering Research Laboratory in Champaign, Illinois.

Photo by Mike Jazdyk

“That impeller was operating in an erosive environment,” said South. “As it spun at high speed, it sucked in sand, which wore away the blades. If I can control my process parameters, I could make the surface harder. That part would last longer in operation.” The new part may someday be printed in the field, or as needed, rather than loaded onto a truckload of spare parts adding to the logistical tail of an expeditionary force.

All of the service branches are working to develop a process for printing explosives, propellants, and pyrotechnics, which aren’t currently approved for AM applications. Impressive as the Army’s RAMBO grenade launcher is, the machines that printed it can’t simply extrude explosive material through a nozzle. Explosive powder in a binder can be 3D printed, but an inert binder often dampens the powder’s explosive force. “Obviously we like to have things go boom,” said South. “And if we can have more boom, the better. We’re leveraging our in-house polymer scienceand our explosive formulation expertise to start making the binder energetic– not just an inert binder, but energetic particles integrated into it, trying tomake the binder itself have energetic content.”

It doesn’t take a lot of imagination to see how this application could go wrong,which is why a major focus for ARL and the other corporate laboratories is designscience, the development of tools to guarantee each build meets specifications.“We already have the capability now, numerically, using these design tools, tosay that if we build a propulsion system in a certain way, this is what the resultwill be in terms of performance. The next step is to experimentally validate thenumerical tools.”

U.S. Army Spc. Randy Martina, assigned to Bravo Company, 299th Battalion Support Brigade, Dagger Brigade, operates a Mark 2 carbon fiber/nylon 3D printer in a Rapid Fabrication via Additive Manufacturing on the Battlefield (R-FAB) system at Amberg Training Area, Germany, May 4, 2018. The R-FAB is an expeditionary, 20-foot container with the capability to fabricate multiple types of equipment parts under multiple environments.

Ensuring that all is going as planned during an individual printing, however, isanother task. ARL researchers are developing tools for in situ characterization –using techniques that train algorithms to flag defects as an object is being formed– and machine learning algorithms that will train different machines to correctlines of code in a build file.

“The last thing you want to do is build something and then at the end have it notbe applicable to your process,” said South, “or not be applicable to the situationthat you need it to be. Ultimately, the research is driving toward qualification.”

ARL research in additive manufacturing, like the programs at its counterpart corporate laboratories, is mostly aimed at the future, chartered for modernization – though it sometimes produces a solution, such as the impeller for the M1 Abrams, that can support the readiness mission of the Army Materiel Command, which stood up operations at its new Joint Manufacturing and Technology Center (RIA-JMTC) Center of Excellence for Advanced and Additive Manufacturing in the spring of 2019.

The RAMBO grenade launcher. The 50 separate parts that make up RAMBO, except springs and fasteners, are 3D printed.

U.S. Army Photo By Spc. Elliot Page

The new Center of Excellence exists, in part, to work with partners in industry, academia, and government to develop and implement best practices for manufacture requests from the field for components that are not in inventory and negatively affecting readiness.

Scaling Up, Scaling Out

Printing of a legacy part out of steel is certainly a milestone, and such technical innovations often grab headlines. But these breakthroughs themselves aren’t what will transform military logistics. The Navy isn’t cranking out printed submarines, and the Marines aren’t printing living quarters overseas – yet. There’s work to be done before such inventions can be manufactured by warfighters where and when they’re needed.

That work consists of scaling up – proving a prototype can be printed multiple times to the same specifications – and scaling out, to extend these new capabilities everywhere the military might need them. An important part of scaling out is simply making digital models widely available. For example, the CCDC Armament Center maintains a digital Repository of AM Parts for Tactical & Operational Readiness (RAPTOR), a searchable joint database for 3D models that allows users to download, upload, and comment on parts in the database.

A key feature of RAPTOR is that it links expeditionary personnel to engineers, who can oversee the process and qualify parts and assemblies – validate that the items perform correctly and will result in expected outcomes. For a plastic visor clip, this is important, but for a part that may determine the airworthiness of an aircraft or the seaworthiness of a naval vessel, it’s a life-and-death issue.

An MV-22B Osprey equipped with a 3D-printed titanium link and fitting inside an engine nacelle maintains a hover during a demonstration on July 29, 2016, at Patuxent River Naval Air Station, Maryland. The flight marked Naval Air Systems Command’s first successful flight demonstration of a flight-critical aircraft component built using additive manufacturing techniques.

U.S. Navy Photo

In July 2016, for the first time, a U.S. naval aircraft, a V-22 Osprey tilt-rotor, flew with a flight-critical part produced by additive manufacturing: a titanium link and fitting assembly used to fasten the engine nacelle to the wing. For the AM Integrated Product Team (IPT) of the Naval Air Systems Command (NAVAIR), led by Liz McMichael, this demonstration was just the beginning. “We deliberately tried to jump over a very high technical barrier,” McMichael said.

One of the critiques often leveled by skeptics, she said, had been that even if AM for low-end components could be scaled out, the process would never work for flight-critical structural components. After the Osprey flew with the nacelle clip, McMichael gave a photo of it to the NAVAIR commander, a three-star admiral, with the caption: “Now what?”

For the next two years, McMichael and her team stood up processes to get AM components, both metal and polymer, approved for use on aircraft. “That was a good idea, but it was still too slow,” she said. “We were starting to make it a more sustainable process, but it still hadn’t been adopted across the organization.”

In March 2018, the team began a new process to support the Marine Corps’ aviation fleet and manage requests for aircraft parts. At the time, a number of Marine service depots had low-end commodity printers, and McMichael wasn’t sure they could be used to print parts for naval aircraft. The engineering and ordnance members of the IPT devised a color-coding scheme to differentiate between components that wouldn’t pose a safety risk if they failed (green) and those that were critical for airworthiness (blue). Once this sorting had been performed – a task more difficult than it sounds, McMichael said – the team worked to devise a replicable process and data package for producing these low-risk components.

That effort has led to a data repository of multiple F/A-18 parts approved for manufacture as “green-box” components that can be made on an inexpensive polymer printer. “That starts to nibble on the next phase for this,” McMichael said, “which is scaling out, coming up with a process that can be used across the organization, across multiple communities – our vendors, our foreign partners, the rest of DOD, and big OEMs [original equipment manufacturers].”

Sailors from Southwest Regional Maintenance Center (SWRMC) watch as their Computer Aided Software (CAD) design is turned into a printed part using a Lulzbot TAZ 3D printer during additive manufacturing training, April 8-12, 2019. The course, taught by instructors from Naval Sea Systems Command, is specifically tailored to provide sailors with the tools to become technical experts in the design and production of AM parts for use with 3D printers being installed on four Navy ships homeported in San Diego, with plans for future installation across the fleet.

Photo By Molly Rhine

NAVAIR is in the middle of this harder phase, McMichael said, and has begun to replicate this process across the naval aviation enterprise. More than 170 different AM parts have been approved for use in naval aircraft – close to 300, said McMichael, including parts produced for NAVAIR by OEMs. “We still do research and development work for AM,” said McMichael. “But we’re also operationalizing. At this point, we have fleet guys who have printers who are making their own parts using additive and putting them on airplanes.”

The IPT has begun to quantify the potential value of AM to the Navy’s airfleet, and the data on the green-box parts is staggering: Compared to parts acquired through the traditional means – sending an order to a manufacturer, who may have to set up a new production line in order to produce it, and then waiting for it to be produced and shipped – the parts produced by AM are 70 percent cheaper, and are ready for use 97 percent faster (in three days, for example, rather than 100).

It seems obvious, then, that if the engineers and maintenance personnel throughout the military could produce components with AM, they would – and save an incredible amount of time and money. It’s also true that more objects can be printed on AM machines today than can be imagined by most people. The innovations necessary to take AM to the next phase within the military, McMichael said, aren’t technical.

“The innovation we really need now is about business models and processes,” she said. Most of NAVAIR’s business partners, like the Navy, are organized in a traditional way, and most of these partners see their job as producing and selling as many parts as possible. “Until we can figure out a way to show industry a different business model,” she said, “and have those leadership or sustainment organizations get compensated differently, we’re going to struggle.” Future models are more likely to be built around the licensing of data and designs, and the speed with which solutions can be delivered.

McMichael and her team – and their counterparts throughout DOD – are working on it. In the meantime, she’s enjoying her job. A few weeks ago, she got a call from a maintenance crew in Japan, where an F/A-18 had been taken out of service because it needed a replacement part: a plug that fit into the armament computer to communicate how many weapons stations were active. The crew had called the manufacturer and been told the part would be ready in about 500 days.

Over a weekend, AM IPT engineers built a technical data package for a replacement plug and e-mailed it to the mechanics in Japan, who printed it, validated it, and asked for a couple of tweaks. The team sent them an updated data package for one of the crew’s commodity polymer printers.

“I called them five days after it had been sent,” McMichael said, “and said, ‘Do you need anything else?’ And they said, ‘No, ma’am. The airplane is up.’”