Brokelmann RG75 - Balkan

SERIES

RG75

TECHNICAL CATALOGUE

RG75 Catalogue 1

Catalogue cover

3

Catalogue pages – Overview

4

Design Description

5

System Description

6

System Description

7

Design Description

8

Table Composite Profiles, Table Profiles and Table Profiles for Accessories

9

Table Corner Connectors and Table T-Connectors

10

Table Accessories, Table Gaskets and Table Installation Material

11

Cross Section Values

12

Cross Section Values

13

Explanations regarding the U-Values Table

14

Design Values Table/U-Values Table 30%

15

U-Values Table 20%

16

Nomimal Values of the Heat Transfer Coefficient Uf

17

Profiles

18

Profiles

19

Profiles

20

Profiles

21

Profiles

22

Profiles

23

Profiles

24

Profiles

25

Profiles

26

Profiles

27

Profiles

28

Additional profiles

29

Corner profiles

30

Corner profiles

31

Corner connectrors for variable corners

32

Corner connectrors for variable corners

33

T-connector profiles

34

Glazing Beads

35

Glazing Table

36

Corner Connectors

37

Corner Connectors

38

Moving Corner Connectors

39

Corner Connectors

40

T- Connectors

41

T- Connectors

42

T- Connectors

43

T- Connectors

44

Accessories

45

Accessories

46

Sections Overview

47

Sections Overview

48 49-79 80-102 104-167

www.balkan.gr

Sections Overview Sections Cutting dimensions Working pages

3

4

RG75 Catalogue

Windows: Heat-insulated composite profile system with voluminous EPDM multi-chamber center seal with preformed angles. Increased heat insulation with glazing seal seated on the rebate ground.

Uf values according to EN ISO 10077.

Design values Uf,BW acc. to DIN V 4108-4: 2002.

Doors: Heat-insulated composite profile system for single- or double-leafed doors, optionally without additional center rebate post profile, inward and outward opening door leafes. Design in panic function acc. to EN 1125 and emergency exit function acc. to EN 179 possible. The window profiles can be integrated with all performance characteristics.

Fittings: Commercially available fittings.

The profiles are implemented with a 10 mm Euro-groove. Increased burglar protection possible due to WK 3 safety class. It is possible to equip the doors with butt hinges or with mulitpart, fitted hinges.

Design: Double wall, hollow composite profiles (three-chamber system) with even surfaced rebate bed.

Dimensions*: Frame profiles: 75 mm installation depth (basic depth); window sashes 85 mm installation depth.

Profile compound: Quality controlled, form-fitting and tensionally locked compound with at least 25% glass-fibre reinforced polyamide webs with melted wire inserts. The hollow composite profiles are suitable for subsequent surface working.

Air permeability of joints and Watertightness under heavy rain: Exposure Category C acc. to DIN 18055

* The installation depths indicated in the catalogue are reference dimensions for planning. The manufactured dimensions for frame and sash profiles are 0.4 mm above the nominal dimensions in the catalogue, the transom profiles 0.2 mm.

March 2009

RG75 Catalogue

5

System Description 1. General This profile system includes heat-insulated, two-wall composite profiles (three-chamber system) for the production of windows and doors.

Heat insulation is achieved by thermal separation of the inner and outer profile walls by means of glassfibre reinforced isolating webs made of polyamide, with special melted wire inserts. In a quality controlled process, the form-fitting and tensionally locked compound is created in the pressing plant.

The design is in accordance with the state of the art and the directives and recommendations of the insulating glas, fittings and sealing materials manufacturers and meets the requirements of the “Directive for the Proof of Stability of Composite Metal-Plastic Profiles” of the German Institute for Construction Engineering,Berlin, as well as the requirements of the provisions regarding quality and testing of aluminium windows.

The Uf values of the profiles and profile combinations have been determined acc. to EN ISO 10077 and are given acc. to DIN V 4108-4: 2002 in design values.

The air permeability of joints and watertightness under heavy rain of the windows correspond to the exposure category C of DIN 18055.

The construction of solid, safe and operational elements is guaranteed. The “Code of Practice for the Processor” in our latest main catalogue must be observed for the use and processing of our design. With our delivery of composite profiles you are also receiving our guarantee for this product.

2. System Scope This profile system includes window and door profiles for the construction of side-hung, turn and tilt, tilt and double sash windows, doors and parallel-slide-and-tilt doors. The main profiles include narrow and wide outer frame, sash, glazing bar, post and sill rail profiles.

Additional profiles are respectively available for wall connections, as well as for expansion and decorative glazing bars. Glazing rebate strips for filling thicknesses (glazing thicknesses) from 18 to 45 mm are available.

2.1 Heat insulation The highly heat insulated design includes frame and glazing bar profiles with a frame profile depth of 75 mm and a sash profile depth of 85 mm for windows and 75 mm for doors, equipped with a voluminous, multichamber EPDM center seal.

www.balkan.gr

The glazing rebate is additionally shielded against thermal radiation and air convection by means of multichamber EPDM cover profiles at both sides of the filling.

The given nominal values of the heat transmission coefficient Uf of 1,5 W/m2 K to 2,4 W/m2 K for individual profiles and profile combinations are given in separate tables and documented by respective test certificates issued by the Institute for Windows Technology in Rosenheim, registered association.

3. Design 3.1 Maximal sash sizes Windows: Sash width 380 - 1600 mm Sash height 600 - 2400 mm max. sash weight: 130 kg additional center locking points for sash heights or widths exceeding 1250 mm.

Parallel-slide-and-tilt-doors: 1680 x 2200 mm from sash profile RG 1220 max. sash weight: 150 kg Doors: 1300x2300 mm max. sash weight: 120 kg 3.2 Statics The section properties of the profiles (inertia moment and section modulus, etc.) are given in separate statics tables.

3.3 Frame and glazing bar connection The corner and T-connections of the profiles in both cavities are made with glued in, aluminium corner or T-connectors, which are fixed with roll pins or with mechanical corner-connection machines.

Water tightness at mitres and joints must be ensured by the processor. This applies especially in regard to the lower horizontal frame and glazing bar profiles.

All orifices at corner and T-connections (continuous grooves of the glazing rebate webs, clamping grooves in the rebate bed, etc.), surfaces of base profiles facing the frame profile, etc., must be sealed with special care (in thin layers as well) with suitable flexible silicone and thiokol sealants.

3.4 Center seal EPDM center seal serving as frame with 50 mm preformed angles. Gluing with the preformed angles is effected with contact adhesive 905 410 (cyanoacrylate adhesive).

The cut of the seal profile is calculated as follows: Sash measure minus 100 mm (2 x 50 mm preformed angle) plus 0.5 %. Example: Sash measure 1100 mm.

Center seal cut = 1100-100 + 5= 1005 mm.

RG75 Catalogue

6

3.5 Glazing The glazing on the sealant free rebate bed is effected with preformed EPDM seal profiles. In order to ensure ventilation (vapour pressure equalization) of the rebate space, openings are built in with a minimum cross section of 15x5 mm or 8 mm diameter placed in front of the center seal that are leading to the ambient air. The openings are

7,5

12

located at the lowest point of the rebate and are provided at least twice in the lower horizontal. The external openings are located between frame angle and glazing spacer block, at a maximal distance of 100 mm from the angle. It is recommended to place these openings laterally and at the upper part of the profiles.

The insertion of glazing spacer blocks (blocking) is effected on glazing rebate inserts of the system. The blocking does not obstruct neither air conduction nor water flow (condensate).

If sealants are used for the glazing, the table “Exposure Categories for the Glazing of Windows” of the Institute for Windows Technology in Rosenheim, registered association, must be observed.

3.6 Drainage of the Design The water entering into the antechamber (pressure compensation chamber) is let off via at least 2 water drain holes, with dimensions 28 x 12 mm, in front of the center seal, directly to the outside. These are located at a distance of about 120 mm from the frame end, maximal distance being 600 mm. The openings are covered with drainage inserts.

In the case of downward drainage of water, directly on the window sill or over a base profile, the entering water is let off through drain louvers, sized 28 35 x 6 mm. Quantity and location as described above. The respective drain louvers in the aluminium base profile 20 should be placed with an offset of 50 mm with regard to the louvers in the frame profile.

3.7 Condensation Water Formation The formation of condensation water on the heatinsulated composite profiles is only possible, if under respective interior and exterior temperatures, as well as under respective interior space air humidity, the formation of condensation water (formation of respiration water) would also be observed on the respective insulating glass panes.

Profiles like roller shutter guides or window sills that are fitted additonally on the external side of the composite profiles, have a negative impact on the internal suface temperatures of these profiles and thus on the condensation water behaviour.

The processor has to take care that no cold air can reach the internal shells of the frame profiles when the elements have been fitted.

This applies especially, if roller shutters are installed over the elements. In this case the face of the frame profile must be covered with fixed sealing strips made of HR polyurethane or polystyrene foam.

Thermal bridges must be avoided.

4. Surface Working Regarding the surface treatment the FWB Guidelines, Edition 11/91, apply.

Variable colouring of the profiles prior to bonding of the semi-shells is possible.

4.1 Anodic Oxidation For the anodic oxidation of the aluminium components DIN 17611 applies. The Quality and Testing Provisions „Anodized Aluminium RAL-RG 661” must be observed by the anodic oxidation plant. The oxide layers produced by anodizing must have a minimum layer thickness of 20 μm. Special care must be applied in the case of material that is to undergo anodic axidation according to the E6 procedure (pickled and eloxated). A guarantee regarding the suitability for this procedure can only be given, if the profiles immediately after their production are delivered to the anodizing treatment plant, where they are processed immediately. In the case of deliveries from warehouse stock we do not assume any responsibility for this procedure whatsoever.

4.2 Colour Coating Colour coating must be executed according to the „Provisions Regarding Qualtiy and Testing of Components RAL-RG 631”. The coating of the profiles is carried out by firing on of coating powders. Normally, polyester-based coating powders are used.

Layer thickness should amount from 60 up to 120 μm at most. The coated profiles must be cured in a furnace at a maximal object temperature of 175° ± 10 °C and a firing time of about 20 minutes (after reaching object temperature).

In order to ensure their faultless colour coating, the aluminium profiles must be subjected to careful pretreatment acc. to DIN 50939. Chromating is necessary.

5. Dimensioning of the Composite Profiles The dimensions given in the catalogue are planning dimensions. Due to different surface treatments they cannot be used as reference dimensions for composite profiles delivered by us.

March 2009

RG75 Catalogue

7

Design Description

Glazing seal , outside

Glazing seal , inside

Glazing bead

Glazing spacer block Glazing rebate insert

At least 2 pcs glazing rebate drains (vapour pressure equalization) Ă˜8 or slots15x5 mm, placed with an offset of 50 mm to each other.

Max. distance 600 mm.

Additional placement respectively at top left and right side is recommended.

Antechamber or pressure compensation chamber

Sash profile

Center web seal with corner mouldings 50x50 EPDM, air-tightness gasket

Frame profile Insulating web, made of glass-fibre reinforced polyamide, curled

www.balkan.gr

RG75 Catalogue

8

Composite Profiles Order No.

Designation

AH275-5075030

Frame profile for facade

24/56 mm

AH275-RG1121

Frame profile

AH275-RG1131

Development in mm

Stock length in m

anod.

anod.*

mech.

6,00

474

339

85

34/58 mm

6,00

402

324

92

Frame profile

44/68 mm

6,00

442

344

112

AH275-RG1211

Sash profile

51/39 mm

6,00

429

373

90

AH275-RG1214

Sash profile, round

51/39 mm

6,00

449

393

90

AH275-RG1221

Sash profile

77/65 mm

6,00

542

426

142

AH275-RG1245

Transom for sash

34/82 mm

6,00

469

391

116

AH275-RG1260

Rebate profile

66 mm

6,00

430

354

66

AH275-RG1261

Rebate profile

66 mm

6.00

433

359

66

AH275-RG1215

Sash profile perimetrical locking 56/44 mm

6,00

470

387

100

AH275-RG1222

Sash profile perimetrical locking 77/65 mm

6,00

549

422

142

AH275-RG1406

Transom/Mullion

34/82 mm

6,00

449

371

116

AH275-RG1411

Transom/Mullion

44/92 mm

6,00

489

391

136

AH275-RG1525

Transom/Mullion

44/92 mm

6.00

589

491

236

AH275-RG2300

Door frame profile

44/70 mm

6,00

465

339

114

AH275-RG2310

Door frame profile

70/44 mm

6,00

460

334

114

AH275-RG2330

Door sash profile

74/72 mm

6,00

522

388

146

AH275-RG2335

Door sash profile

44/98 mm

6,00

526

390

146

AH275-RG2350

Change profile

50/ 6 mm

6,00

345

255

50

AH275-RG2395

Base profile

109/133 mm

6,00

661

478

242

AH275-RG1750

Corner post profile

6,00

607

365

160

75x75/ 80X80 mm

Profiles Order No.

Designation

AH900-TF457A AH900-TF460 AH900-TF464 AH900-TF465 AH900-TF466

Glazing bead Glazing bead Glazing bead Glazing bead Glazing bead

Development in mm

Stock length in m 34 mm 44 mm 27 mm 37 mm 47 mm

6,0 6,0 6,0 6,0 6,0

anod.

147 168 193 212 232

mech.

57 66 49 59 69

Profiles for accessories Order No.

Designation

AH900-TF481

Corner connector profile, 6.0 mm

6,0

AH900-TF483

Corner connector profile, 12,0 mm

6,0

AH900-TF495

Corner connector profile, 16,4 mm

6,0

AH900-TF496

Corner connector profile, 20,0 mm

6,0

AH900-TF497

Corner connector profile, 22,8 mm

6,0

AH900-TF498

Corner connector profile, 26,8 mm

6,0

AH900-TF499

Corner connector profile, 30,0 mm

6,0

AH900-TF500

Corner connector profile, 32,0 mm

6,0

AH900-TF501

Corner connector profile, 34,0 mm

6,0

AH900-TF502

Corner connector profile, 45,4 mm

6,0

Order No.

Designation

AH900-TF649 AH900-TF558 AH900-TF650 AH900-TF269 AH900-TF292 AH900-TF368 AH900-TF403 AH900-TF403B AH900-TF419 AH900-TF419B AH900-TF290

Joint for mullion 11,5Χ50 Profile for corner 20,5mm Joint for mullion 19,4Χ46 Addition for frame & mullion Additional sash drainage H for frame joining Addition for door seal in Addition for door seal in Addition for door seal out Addition for door seal out Movement transmition rod March 2009

RG75 Catalogue

9

Corner connectors Order No. AE001-901440-00

Designation Corner connector for profiles AH275-RG1211, AH275-RG1214, outside

Required installation material Quantity Order No.

Profile Code

2 pcs

AE009-905140-00

AH900-TF481

AE001-901459-00

Corner connector for profiles AH275-RG1121, AH275-5075030, outside

2 pcs

AE009-905150-00

AH900-TF495

AE001-901474-00

Corner connector for profiles AH275-RG1131, outside

2 pcs

AE009-905160-00

AH900-TF498

AE001-901484-00

Corner connector for profile AH275-RG1221 AH275-RG1222, outside

2 pcs

AE009-905160-00

AH900-TF500

AE001-901494-00

Corner connector for profiles AH275- RG2300 and RG 2310, outside

2 pcs

AE009-905160-00

AH900-TF501

AE001-901499-00

Corner connector for profiles AH275-RG2330, AH275- RG2335, outside

2 pcs

AE009-905145-00

AH900-TF502

AE001-901540-00

Corner connector for profile AH275-RG1215, inside

2 pcs

AE009-905150-00

AH900-TF495

AE001-901545-00

Corner connector for profile AH275-RG1215, outside

2 pcs

AE009-905140-00

AH900-TF483

AE001-901550-00

Corner connector for profile AH275-RG1222, inside

2 pcs

AE009-905160-00

AH900-TF501

AE001-901569-00

Corner connector for profiles AH275-5075030, AH275-RG1121,AH275- RG1406, inside

2 pcs

AE009-905160-00

AH900-TF496

AE001-901579-00

Corner connector for profiles AH275-RG1211, AH275-RG 1214, inside

2 pcs

AE009-905160-00

AH900-TF496

AE001-901589-00

Corner connector for profiles AH275-RG1131 and AH275-RG1411, inside

2 pcs

AE009-905160-00

AH900-TF499

AE001-901654-00

Corner connector for profiles AH275-RG2300 and AH275-RG2310, inside

2 pcs

AE009-905160-00

AH900-TF501

AE001-901679-00

Corner connector for profiles AH275-RG2330, AH275- RG2335 , inside

2 pcs

AE009-905160-00

AH900-TF502

AE001-901684-00

Corner connector for profile AH275-RG1221, inside

2 pcs

AE009-905160-00

AH900-TF502

AE001-901450-00

Corner connector for profile AH275-RG1406, outside

2 pcs

AE009-905160-00

AH900-TF483

AE001-901469-00

Corner connector for profile AH275-RG1411, outside

2 pcs

AE009-905160-00

AH900-TF497

Required installation material Quantity Order No.

Profile Code

T- connectors Order No.

Designation

AE003-902025-00

T-connector for profiles AH275-RG1245 and AH275-RG1406, outside on frame, sash and transom glazing bar profiles

1 pc

AE009-905150-00

AH900-TF649

AE003-902028-00

T-connector for profiles AH275-RG1411, on frame and transom profiles

1 pc

AE009-905160-00

AH900-TF649

AE003-902026-00

T-connector for profiles AH275-RG1121, outside on frame and transom profiles

1 pc

AE009-905160-00

AH900-TF649

AE003-902033-00

T-connector for profiles AH275-RG1131 , outside on frame and transom profiles

1 pc

AE009-905160-00

AH900-TF649

AE003-902046-00

T-connector for profiles AH275-RG1121, AH275- RG1245 and AH275-RG1406 inside, on frame and glazing bar profiles

1 pc

AE009-905160-00

AH900-TF650

AE003-902047-00

T-connector for profiles AH275-RG1131, AH275-RG1411, inside on frame and transom profiles

1 pc

AE009-905160-00

AH900-TF650

AE003-902050-00

T-connector for profiles AH275-RG2395 inside on frame and transom profiles

2 pcs

AE009-905160-00

AH900-TF650

AE003-902295-00

T-connector for profiles AH275-RG2395 outside on door sash profiles

2 pcs

AE009-905150-00

AH900-TF649

www.balkan.gr

RG75 Catalogue

10

Corner connectors for variable angles Inside

Outside

Profile

Mobile Corner Connector Inside

Countersunk Screw DIN 963

Measure X

Mobile Corner Connector Outside

Countersunk Screw DIN 963

Measure X

Frame

AH275-RG1121

AE001-901567-00

M5X20

12,15

AE001-901457-00

M5X12

10,35

Window Sash

AH275-RG1W211

AE001-901577-00

M5X20

12,15

AE001-901442-00

M4X8

5,2

Frame with T-Profile

AH275-RG1406

AE001-901-567-00

M5X20

12,15

AE001-901452-00

M5X12

8,55

Accessories Order No.

Designation

AE011-903005-00

Glass support

AE011-903022-00

Central gasket corner

AE011-903325-00

Sealing element, at top, for double-leaf, inward and outward opening doors, access leaf acc. to DIN left

AE011-903327-00

Sealing element, at top, for double-leaf, inward and outward opening doors, access leaf acc. to DIN right

AE011-903330-00

Sealing element, at top, for double-leaf, inward and outward opening doors, access leaf acc. to DIN right

AE011-903332-00

Sealing element, at top, for double-leaf, inward and outward opening doors, access leaf acc. to DIN left

AE011-903345-00

Sealing element for additional rebate sash profile AH275-RG1260, top arrangement with rebate sash acc. to DIN to the right, bottom arrangement with rebate sash acc. to DIN to the left

AE011-903347-00

Sealing element for additional rebate sash profile AH275-RG1260, bottom arrangment with rebate sash acc. to DIN to the right, top arrangement with rebate sash acc. to DIN to the left

AE005-000004-02

Plug for central adaptor straight AH275-RG1260

AE005-000007-02

Plug for central adaptor AH275-RG1261

Gaskets Order No.

Designation

AE004-904015-00

Stroke gasket for window sash profiles

AE004-904035-00

Stroke gasket for doors

AE004-904285-00

Central gasket (highly insulated)

AE004-904003-20

Glazing gasket 6.5 mm, inside, with two sealing slips

AE004-90403-25

Glazing gasket 8,5 mm, inside, with two sealing slips

AE004-904003-30

Glazing gasket 4.0 mm, outside, with sealing slip

AE004-00004-00

Gasket for bottom rail

Installation material Order No.

Designation

AE009-905140-00

Roll pin 4 mm x 8 mm (conical), for corner connector AE001-901440-00

AE009-905145-00

Roll pin 5 mm x 18 mm (cylindrical), for corner cnnector AE001-901499-00

AE009-905150-00

Roll pin 7 mm x 13.5 mm (cylindrical), for corner and T-connector

AE009-905160-00

Roll pin 7 mm x 18.0 mm (cylindrical), for corner and T-connector

AE009-000002-00

Sping pin 4mm x30mm, for bottom rail March 2009

RG75 Catalogue

11

Statics Cross section values

(ideal inertia moments) lx id [cm4]

X

www.balkan.gr

X

Profile Order No.

Support width L [cm]

{acc. to ifBT directive}

150

200

250

300

400

500

AH275-RG1121

25,87

30,19

32,79

34,42

36,22

37,13

37,65

AH275-RG1131

28,60

33,86

37,13

39,22

41,57

42,76

43,45

AH275-RG1211

35,89

41,67

45,19

47,41

49,87

51,12

51,82

AH275-RG1214

35,95

43,05

46,58

48,21

50,35

52,30

55,45

AH275-RG1215

41,20

45,48

48,73

51,02

55,48

61,28

63,90

AH275-RG1221

44,99

53,96

59,84

63,73

68,24

70,59

71,94

AH275-RG1222

47,35

54,23

62,78

65,39

70,12

72,73

73,50

AH275-RG1245

38,27

45,50

50,07

53,01

56,35

58,05

59,03

AH275-RG1260

24,41

28,15

30,36

31,74

33,25

34,00

34,43

600

RG75 Catalogue

12

Statics Cross section values

(ideal inertia moments) lx id [cm4]

X

X

Profile Order No.

Support width L [cm]

{acc. to ifBT directive}

150

300

200

250

400

500

600

AH275-RG1261

29,29

33,50

36,73

38,08

39,9

40,8

41,32

AH275-RG1406

29,00

34,42

37,79

39,94

42,36

43,59

44,29

AH275-RG1411

31,54

37,89

41,93

44,55

47,54

49,08

46,96

AH275-RG1525

105,27

122,56 134,32 142,29 151,69 156,67 159,56

AH275-RG2300

30,30

35,85

39,45

41,84

44,57

45,99

46,81

AH275-RG2310

31,75

37,34

40,96

43,34

46,07

47,48

48,29

AH275-RG2330

35,47

42,39

47,00

50,09

53,70

55,59

56,69

AH275-RG2335

33,29

39,91

44,33

47,28

50,74

52,55

53,60

AH275-RG1750

58,13

61,88

64,90

67,21

70,28

72,08

73,19

March 2009

RG75 Catalogue

13

Determination of nominal values of the heat transfer coefficient Uw from the tables of DIN EN ISO 10077-1: 2000 and DIN V 4108-4: 2000.

Determination of Uw values for windows and doors acc. to Example 1: 1. Taking of the nominal value Uf from the Brokelmann Table 1-3 acc. to DIN EN ISO 10077-2 2. Allocation of the Uf value and determination of Uf,BW in Table 7 acc. to DIN V 4108-4:2002-02 3. Transfer of the Uf,BW to Table F.1 or F.2 in order to determine the nominal value of the heat ransfer coefficient Uw ( DIN 10077-1:2000 und DIN V 4108-4 ) 4. Determination of the Ug value of the glazing and reading out the nominal value Uw in Table F.1 or F.2.

Attention: The nominal values Uw for windows and doors comprised in Tables F.1 and F.2 have been determined with standard window sizes 1.23 m x 1.48 m and are taking a frame surface portion of 30% or 20% as a basis.

Example 1: Table 7 - Allocation of Ur values of individual profiles

to a Uf,BW design value for frames. DIN V 4108-4:2002-02 Uf - value for individual profiles W / m²K

Uf,BW

- design value W / m²K

<0.90

0.80

>0.90

<1.1

1.00

Uf value of frame from Brokelmann Table 1-3 acc. to DIN EN ISO 10077-2

>1.0

<1.3

1.20

>1.3

<1.6

1.40

>1.6

<2.0

1.80

>2.0

<2.4

2.20

e.g. 1.94 W/m²K

>2.4

<2.8

2.60

>2.8

<3.2

3.00

>3.2

<3.6

3.40

>3.6

<4.0

3.80

>4.0

7.0

Table F0.1: Heat transfer coefficient Uw for windows with a frame surface portion of 30%

to the total surface area of the window. DIN EN ISO 10077-1:2000 Type of glazing

Ug value of glazing from German Federal Gazette or the DIN 673 Standard

Uf W / m²K Frame surface portion 30%

Ug 1.0

1.4

1.8

2.2

2.6

3.0

3.4

3.8

7.0

Single-pane glazing

5.7

4.3

4.4

4.5

4.6

4.8

4.9

5.0

5.1

6.1

Two-pane insulating glazing

3.3 3.1 2.9

2.7 2.6 2.4 2.3

2.8 2.7 2.5 2.4

2.9 2.8 2.7 2.5

3.1 2.9 2.8 2.6

3.2 3.1 3.0 2.8

3.5 3.3 3.2 3.1

3.6 3.5 3.3 3.2

4.4 4.3 4.1 4.0

2.2 2.1 1.9 1.8 1.6 1.5 1.4 1.2

2.3 2.2 2.0 1.9 1.8 1.6 1.5 1.3

2.4

2.6 2.4

2.7 2.6 2.4

3.4 3.2 3.1 2.9 2.8 2.7 2.6 2.4

3.0 2.8 2.7 2.5 2.4

3.1 2.9 2.8 2.7 2.5 2.4 2.2 2.1

3.9 3.8 3.6 3.5 3.3 3.2 3.1 2.9

2.7 2.5 2.3 2.1 1.9 1.7 1.5 1.3 1.1

2.3 2.2 2.0 1.9 1.7 1.6 1.5

2.3 2.1 2.0 1.9 1.7 1.6

2.3 2.2 2.0 1.9 1.7

e.g. 1.3 W/m²K

Uw - value of window e.g. 1.6 W/m²K www.balkan.gr

2.3 2.1 2.0 1.9

2.3 2.1 2.0

RG75 Catalogue

14

Determination of nominal values of heat ransfer coefficient for windows and doors Uw for aluminium profiles.

Table 7: Allocation of Uf values to UfBW - design values Table 7- Allocation of the Uf values of individual profiles to a Uf,BW design value for frames. DIN V 4108-4:2002-02 Uf - value for individual profiles W / m²K

Uf,BW - design value W / m²K

<0.90

0.80

>0.90

<1.1

1.00

>1.0

<1.3

1.20

>1.3

<1.6

1.40

>1.6

<2.0

1.80

>2.0

<2.4

2.20

>2.4

<2.8

2.60

>2.8

<3.2

3.00

>3.2

<3.6

3.40

>3.6

<4.0

3.80

>4.0

7.0

Table F.1: For a frame surface portion of 30% Table F.1: Heat transfer coefficient Uw for windows with a frame surface portion of 30% to the total surface area of the window. DIN EN ISO 10077-1:2000

Type of glazing

Single-pane glazing

Two-pane insulating glazing

Three-pane insulating glazing

Uf W / m²K Frame surface portion 30%

Ug W/m²K

1.0

1.4

1.8

2.2

2.6

3.0

3.4

3.8

7.0

5.7

4.3

4.4

4.5

4.6

4.8

4.9

5.0

5.1

6.1

3.3

2.7

2.8

2.9

3.1

3.2

3.4

3.5

3.6

4.4

3.1

2.6

2.7

2.8

2.9

3.1

3.2

3.3

3.5

4.3

2.9

2.4

2.5

2.7

2.8

3.0

3.1

3.2

3.3

4.1

2.7

2.3

2.4

2.5

2.6

2.8

2.9

3.1

3.2

4.0

2.5

2.2

2.3

2.4

2.6

2.7

2.8

3.0

3.1

3.9

2.3

2.1

2.2

2.3

2.4

2.6

2.7

2.8

2.9

3.8

2.1

1.9

2.0

2.2

2.3

2.4

2.6

2.7

2.8

3.6

1.9

1.8

1.9

2.0

2.1

2.3

2.4

2.5

2.7

3.5

1.7

1.6

1.8

1.9

2.0

2.2

2.3

2.4

2.5

3.3

1.5

1.5

1.6

1.7

1.9

2.0

2.1

2.3

2.4

3.2

1.3

1.4

1.5

1.6

1.7

1.9

2.0

2.1

2.2

3.1

1.1

1.2

1.3

1.5

1.6

1.7

1.9

2.0

2.1

2.9

2.3

2.0

2.1

2.2

2.4

2.5

2.7

2.8

2.9

3.7

2.1

1.9

2.0

2.1

2.2

2.4

2.5

2.6

2.8

3.6

1.9

1.7

1.8

2.0

2.1

2.3

2.4

2.5

2.6

3.4

1.7

1.6

1.7

1.8

1.9

2.1

2.2

2.4

2.5

3.3

1.5

1.5

1.6

1.7

1.9

2.0

2.1

2.3

2.4

3.2

1.3

1.4

1.5

1.6

1.7

1.9

2.0

2.1

2.2

3.1

1.1

1.2

1.3

1.5

1.6

1.7

1.9

2.0

2.1

2.9

0.9

1.1

1.2

1.3

1.4

1.6

1.7

1.8

2.0

2.8

0.7

0.9

1.1

1.2

1.3

1.5

1.6

1.7

1.8

2.6

0.5

0.8

0.9

1.0

1.2

1.3

1.4

1.6

1.7

2.5 March 2009

RG75 Catalogue

15

Table 1 - 3

Determination of the nominal values of the heat transfer coefficient for windows and doors Uw for aluminium profiles Table F.2: For a frame surface portion of 20%

Table F.2: Heat transfer coefficient Uw for windows with a frame surface protion of 20% to the total surface area of the window. DIN EN 19010077-1:2000

Type of glazing

Single-pane glazing

Two-pane insulating glazing

Three-pane insulating glazing

Uf W / m²K Frame surface portion 30%

Ug W/m²K

1.0

1.4

1.8

2.2

2.6

3.0

3.4

3.8

7.0

5.7

4.8

4.8

4.9

5.0

5.1

5.2

5.2

5.3

5.9

3.3

2.9

3.0

3.1

3.2

3.3

3.4

3.4

3.5

4.0

3.1

2.8

2.8

2.9

3.0

3.1

3.2

3.3

3.4

3.9

2.9

2.6

2.7

2.8

2.8

3.0

3.0

3.1

3.2

3.7

2.7

2.4

2.5

2.6

2.7

2.8

2.9

3.0

3.0

3.6

2.5

2.3

2.4

2.5

2.6

2.7

2.7

2.8

2.9

3.4

2.3

2.1

2.2

2.3

2.4

2.5

2.6

2.7

2.7

3.3

2.1

2.0

2.1

2.2

2.2

2.3

2.4

2.5

2.6

3.1

1.9

1.8

1.9

2.0

2.1

2.2

2.3

2.3

2.4

3.0

1.7

1.7

1.8

1.8

1.9

2.0

2.1

2.2

2.3

2.8

1.5

1.5

1.6

1.7

1.8

1.9

1.9

2.0

2.1

2.6

1.3

1.4

1.4

1.5

1.6

1.7

1.8

1.9

2.0

2.5

1.1

1.2

1.3

1.4

1.4

1.5

1.6

1.7

1.8

2.3

2.3

2.1

2.2

2.3

2.4

2.5

2.6

2.6

2.7

3.2

2.1

2.0

2.0

2.1

2.2

2.3

2.4

2.5

2.6

3.1

1.9

1.8

1.9

2.0

2.0

2.2

2.2

2.3

2.4

2.9

1.7

1.6

1.7

1.8

1.9

2.0

2.1

2.2

2.2

2.8

1.5

1.5

1.6

1.7

1.8

1.9

1.9

2.0

2.1

2.6

1.3

1.4

1.4

1.5

1.6

1.7

1.8

1.9

2.0

2.5

1.1

1.2

1.3

1.4

1.4

1.5

1.6

1.7

1.8

2.3

0.9

1.0

1.1

1.2

1.3

1.4

1.5

1.6

1.6

2.2

0.7

0.9

1.0

1.0

1.1

1.2

1.3

1.4

1.5

2.0

0.5

0.7

0.8

0.9

1.0

1.1

1.2

1.2

1.3

1.8

Note: The Tables F.1 and F.2 were calculated with Y-values from Annex E of DIN EN ISO 10077-1:2000 for glazing spacers made of aluminium and steel (not of stainless type).

www.balkan.gr

RG75 Catalogue

16

Nominal values of the heat transfer coefficient Uf Nominal values of the heat transfer coefficient Uf Moving cross sections

Fixed cross sections

Outer frame-sash combination

Outer frame

External visible width

External visible width

The nominal values of the heat transfer coefficient Uf given belowhave been determined according to EN ISO 10077-2: Values in W / m2K

Moving cross sections

Fixed cross sections Outer frame

Outer frame-sash combination

2,0

AH275-RG1211

AH275-RG1221

AE004-904285-00

AE004-904285-00

2,1

2,0

2,1

2,0

AH275-RG1121

2,0

AH275-RG1131

Door RG 75 2,1 AH275-RG2300

AH275-RG2300

All other profile combinations Door with a value of:

2,3

March 2009

RG75 Catalogue

17

49,5 30

AE001-901569-00

AH275-5075030 Frame profile for facade Dev. anod.: 451/319* mm

W=1,871 kg/m

28

75

70,5

Dev. mech.: 86 mm

AE001-901459-00

4,5

56 72,5

34

24

AE001-901569-00

AH275-RG1121 Frame profile

75

70,5

AE003-902046-00

AE003-902026-00

58

4,5

AE001-901459-00

* Development for the connected profile

www.balkan.gr

Dev. anod.: 402/324* mm Dev. mech.: 92 mm

W=1,543 kg/m

RG75 Catalogue

18

24

44

AH275-RG1131 Frame profile

AE001-901589-00

Dev. anod.: 442/344* mm AE003-902047-00

W=1,743 kg/m

75

70,5

Dev. mech.:112mm

AE003-902033-00

AE001-901474-00

4,5

68

75 51

24

AH275-RG1211 Sash profile

4,3

AE001-901579-00

Dev. anod.: 429/373* mm

W=1,667 kg/m

Dev. mech.: 90 mm In order to achieve the Uf value for specific conditions see

85

80,5

Diagram Uf Values

36

39

4,5

AE001-901440-00

* Development for the connected profile

March 2009

RG75 Catalogue

19

101 24

77

AH275-RG1221 Sash profile

4,3

AE001-901684-00

Dev. anod.: 542/426* mm

W=2,182 kg/m

85

80,5

Dev. mech.: 142 mm

AE001-901484-00

36

51

4,5

65

24

AH275-RG1214 Sash profile, round

AE001-901579-00

4,3

Dev. anod.: 449/393* mm

AE001-901440-00

36

12,1

85

72,9

Dev. mech.: 90 mm

39

* Development for the connected profile

www.balkan.gr

W=1,977 kg/m

RG75 Catalogue

20

56

24

4,3

AE001-901540-00

AH275-RG1215 Sash profile perimetrical locking Dev. anod.: 398 mm

W=1,877 kg/m

85

80,5

Dev. mech.: 100 mm

AE001-901545-00

44 4,5

36

24

77

AH275-RG1222 Sash profile perimetrical locking

4,3

AE001-901550-00

Dev. anod.: 432 mm

W=2,347kg/m

85

80,5

Dev. mech.: 142 mm

AE001-901484-00

65 4,5

36

March 2009

RG75 Catalogue 34

24

21

24

AE003-902046-00

AH275-RG1245 Transom for sash Dev. anod.: 469/391* mm

W=1,853 kg/m

85

80,5

Dev. mech.: 116 mm

AE003-902025-00

4,5

82

34

AH275-RG1260 Rebate profile Dev. anod.: 430/354* mm

W=1,436 kg/m

Dev. mech.: 66 mm Sealing element AE011-903345-00 for rebate sash acc. to DIN at right = top

83

for rebate sash acc. to DIN at left = bottom Sealing element AE011-903347-00

75

for rebate sash acc. to DIN at right = bottom

4,7

4,5

for rebate sash acc. to DIN at left = top

66 72

* Development for the connected profile

www.balkan.gr

RG75 Catalogue

22

29,8

75,6

83,3

AH275-RG1261 Transom / Mullion Perimetrical Mechanism Dev. anod.: 433/359* mm

W=1,749 kg/m

4,7

4,5

Dev. mech.: 66 mm

66 72

24

24

34

AE001-901569-00

AH275-RG1406 Transom / Mullion

AE003-902046-00

Dev. anod.: 449/371* mm

W=1,758 kg/m

75

70,5

Dev. mech.: 116 mm

AE003-902025-00

82

4,5

AE001-901450-00

* Development for the connected profile

March 2009

RG75 Catalogue 24

23

24

44

AE001-901589-00

75

70,5

AE003-902047-00

AH275-RG1411 Transom / Mullion Dev. anod.: 489/391* mm

W=1,876 kg/m

Dev. mech.: 136 mm

AE003-902028-00

4,5

AE001-901469-00

92

44

70,5

24

AH275-RG1525 Transom for sash Dev. anod.: 589/491* mm

W=2,972 kg/m

50

4,5

Dev. mech.: 236 mm

R

20

52

* Development for the connected profile

www.balkan.gr

RG75 Catalogue

24

44

16

7,5

10

AE001-901654-00

AH275-RG2300 Door frame profile Dev. anod.: 465/339* mm

W=1,989 kg/m

Dev. mech.: 114 mm

75

70,7

Inward opening

4,3

AE001-901494-00

70

4,3

70

AH275-RG2310 Door frame profile

AE001-901654-00

Dev. anod.: 460/334* mm

W=1,999 kg/m

Dev. mech.:114 mm

70,7

75

Outward opening

7,5

AE001-901494-00

10

44 70

March 2009

RG75 Catalogue

25

24

74

4,3

AE001-901679-00

AH275-RG2330 Door sash profile Dev. anod.:522/388* mm

W=2,224 kg/m

75

70,5

Dev. mech.:146 mm Inward opening

7,5

AE001-901499-00

10

72

4,5

16

98

24

74 10

48

7,5

16

AH275-RG2335 Door sash profile

AE001-901679-00

Dev. anod.:526/390* mm Dev. mech.:146 mm

75

70,5

Outward opening

98

* Development for the connected profile

www.balkan.gr

4,5

AE001-901499-00

W=2,204 kg/m

RG75 Catalogue

26

50

4,3

52,5

AH275-RG2350 Change profile for door frame Dev. anod.: 345/255* mm

W=1,374 kg/m

68,7

73

Dev. mech.: 50 mm

17,2 36,5

5

5

75

AH275-RG1750 Corner post profile Dev. anod.: 607/365* mm

W=2,913 kg/m

75

80

Dev. mech.: 160 mm

80

* Development for the connected profile

March 2009

RG75 Catalogue 70,5

4,5

27

AH275-RG2395 Base profile W=2,894 kg/m

24

Dev. anod.: 661/478* mm Dev. mech.: 242mm

4,5

4,5

109

AE003-902050-00

AE003-902295-00

133

14,5

24,5

AH900-TF403B Stop ledge W=0.198 kg/m

Dev. anod.: 101 mm

4,5

Dev. mech.: 14,5 mm

4,5 22,6

75

AH900-TF419B Stop ledge Dev. anod.: 69 mm

W=0.134 kg/m

Dev. mech.: - mm

12

AH275-RG555 Bottom Door Profile Dev. anod.: 248,66/227* mm 60,2

Dev. mech.: 24 mm

www.balkan.gr

W=0,762 kg/m

RG75 Catalogue

28 23

14,5

AH900-TF403 Stop ledge Dev. anod.: 96 mm

4

W=0.184 kg/m

4,5

4,5

Dev. mech.: 14 mm

AH900-TF419 Stop ledge 4

Dev. anod.: 66 mm

20,8

W=0.109 kg/m

1,8

Dev. mech.: - mm

AL900-911 Connecting Rod

4

14

Dev. anod.: 46 mm

19

W=0.124 kg/m

Dev. mech.: 14 mm

AH900-TF290 Connecting rod

13,5

Dev. anod.: 50 mm

W=0.161 kg/m

Dev. mech.: 13,5 mm

2,5

2,5

19,5

Opening of connecting rod channels, cutting to length and perforation of the connecting rod for the FWB window fitting

5,8

AH900-TF269 Additional profile

12

34,5

Dev. anod.: 151 mm

W=0,323 kg/m

Dev. mech.: 47 mm

AH900-TF292 Weather rail

B4 ,2x 16

Dev. anod.: 67 mm

18

W=0.122 kg/m

Dev. mech.: 22 mm

7,5

Dev. mech.: - mm

19

Dev. anod.: 47 mm

5

7,5

AH900-TF368 Connecting profile

AH900-370 Connecting Rod Dev. anod.: 132,2 mm 20

W=0.093 kg/m

W=0.316 kg/m

Dev. mech.: 20 mm

March 2009

RG75 Catalogue

29

Scale: 1:2 50

65

65

12

6

50

AH900-TF481 Corner connector profile

AH900-TF483 Corner connector profile

W=1,843 kg/m

W=2,881 kg/m

50

20 65

65

16,4

50

AH900-TF495 Corner connector profile

AH900-TF496 Corner connector profile

W=2.285kg/m

W=2,422 kg/m

65

50

26,4 66,4

65

22,8

50

AH900-TF497 Corner connector profile

AH900-TF498 Corner connector profile

W=2,405 kg/m

W=2,673 kg/m

www.balkan.gr

RG75 Catalogue

30 Scale: 1:2

65

65 50

70

66,4

30

32

50

AH900-TF499 Corner connector profile

AH900-TF500 Corner connector profile

W=2,782 kg/m

W=2,751 kg/m

65

65

50

45,4 85,4

74

34

50

AH900-TF501 Corner connector profile

AH900-TF502 Corner connector profile

W=2,930 kg/m

W=3.503 kg/m

65

20,5

50

AH900-TF558 Corner connector profile W=2.459 kg/m

March 2009

RG75 Catalogue

31

6 25°-1

6

80 °

AE001-901442-00 Corner Connector for Variable Angle

1 12 ,

12,1

80°

25°-1

AE001-901452-00 Corner Connector for Variable Angle

AE001-901457-00 Corner Connector for Variable Angle 5 16 ,

16,5

80°

25°-1

www.balkan.gr

32

RG75 Catalogue

1 20 , 25째-1

AE001-901567-00 Corner Connector for Variable Angle

20,1

80째

1

2 0.

Scale: 1:2

20.1

AE001-901577-00 Corner Connector for Variable Angle

March 2009

RG75 Catalogue

33

11,5

AH900-TF649 T-connector profile 50,1

W=0.813 kg/m

13

AH900-TF650 T-connector profile 46,5

W=0.911 kg/m

19,4

www.balkan.gr

RG75 Catalogue

34 34

22

AH900-TF457A Glazing bead Dev. anod.: 147 mm

W=0,335 kg/m

Dev. mech.: 57 mm

for 10 mm receiving groove

44

22

AH900-TF460 Glazing bead Dev. anod.: 168 mm

W=0,281 kg/m

Dev. mech.: 66 mm

for 10 mm receiving groove

17

22

AH900-TF463 Glazing bead Dev. anod.: 152,1 mm

W=0,253 kg/m

Dev. mech.: 39 mm

for 10 mm receiving groove

27

22

AH900-TF464 Glazing bead Dev. anod.: 193 mm

W=0,325 kg/m

Dev. mech.: 49 mm

for 10 mm receiving groove 37

AH900-TF465 Glazing bead 22

Dev. anod.: 212 mm

W=0.363 kg/m

Dev. mech.: 59 mm

for 10 mm receiving groove

22

47

AH900-TF466 Glazing bead Dev. anod.: 232 mm

W=0,400 kg/m

Dev. mech.: 69 mm

for 10 mm receiving groove Glazing beads for bent elements. Prior to bending cut off elements according to the respective glazing thickness.

March 2009

RG75 Catalogue

35

Glazing Table Frame, glazing bar and door leaf profiles Installation depth 75 mm

Window sashes Installation depth 85 mm

A Glazing thickness

B Clearance of glazing seal, inside

C Glazing bead width

A Glazing thickness

B Clearance of glazing seal, inside

C Glazing bead width

11

AE004-904003-25 = 8,5 mm

AH900-TF466 = 47 mm

21

AE004-904003-25 = 8,5 mm

AH900-TF466 = 47 mm

12

AE004-904003-25 = 7,5 mm

AH900-TF466 = 47 mm

22

AE004-904003-20 = 7,5 mm

AH900-TF466 = 47 mm

13

AE004-904003-20 = 6,5 mm

AH900-TF466 = 47 mm

23

AE004-904003-20 = 6,5 mm

AH900-TF466 = 47 mm

14

AE004-904003-20 = 5,5 mm

AH900-TF466 = 47 mm

24

AE004-904003-20 = 5,5 mm

AH900-TF466 = 47 mm

15

AE004-904003-25 = 7,5 mm

AH900-TF460 = 44 mm

25

AE004-904003-25 = 7,5 mm

AH900-TF460 = 44 mm

16

AE004-904003-20 = 6,5 mm

AH900-TF460 = 44 mm

26

AE004-904003-20 = 6,5 mm

AH900-TF460 = 44 mm

17

AE004-904003-20 = 5,5 mm

AH900-TF460 = 44 mm

27

AE004-904003-20 = 5,5 mm

AH900-TF460 = 44 mm

21

AE004-904003-25 = 8,5 mm

AH900-TF465 = 37 mm

31

AE004-904003-25 = 8,5 mm

AH900-TF465 = 37 mm

22

AE004-904003-25 = 7,5 mm

AH900-TF465 = 37 mm

32

AE004-904003-25 = 7,5 mm

AH900-TF465 = 37 mm

23

AE004-904003-20 = 6,5 mm

AH900-TF465 = 37 mm

33

AE004-904003-20 = 6,5 mm

AH900-TF465 = 37 mm

24

AE004-904003-20 = 5,5 mm

AH900-TF465 = 37 mm

34

AE004-904003-20 = 5,5 mm

AH900-TF465 = 37 mm

25

AE004-904003-25 = 7,5 mm

AH900-TF457A = 34 mm

35

AE004-904003-25 = 7,5 mm

AH900-TF457A = 34 mm

26

AE004-904003-20 = 6,5 mm

AH900-TF457A = 34 mm

36

AE004-904003-20 = 6,5 mm

AH900-TF457A = 34 mm

27

AE004-904003-20 = 5,5 mm

AH900-TF457A = 34 mm

37

AE004-904003-20 = 5,5 mm

AH900-TF457A = 34 mm

31

AE004-904003-25 = 8,5 mm

AH900-TF464 = 27 mm

41

AE004-904003-25 = 8,5 mm

AH900-TF464 = 27 mm

32

AE004-904003-25 = 7,5 mm

AH900-TF464 = 27 mm

42

AE004-904003-25 = 7,5 mm

AH900-TF464 = 27 mm

33

AE004-904003-20 = 6,5 mm

AH900-TF464 = 27 mm

43

AE004-904003-20 = 6,5 mm

AH900-TF464 = 27 mm

34

AE004-904003-20 = 5,5 mm

AH900-TF464 = 27 mm

44

AE004-904003-20 = 5,5 mm

AH900-TF464 = 27 mm

75

85 66.5

A

4

B

8.5 C

AH900-TF465

ATTENTION: Theoretical nominal sizes!

www.balkan.gr

AE004-904003-30

AE004-904003-30

8.5

4

76.5 A

B

C

AH900-TF466

RG75 Catalogue

36

Roll pin

Window Frame

AE009-905140-00

Roll pin

AE009-905150-00 AE009-905150-00 AE009-905160-00

AE009-905160-00

Corner connector

Roll pin

AE001-901459-00

AE009-905150-00

AE001-901474-00

AE009-905160-00

AE001-901659-00

AE009-905160-00

AE001-901589-00

AE009-905160-00

Profile

Corner connector for inner shell

Measure b

Measure h

Corner connector for outer shell

Measure b

Measure h

AH275-5075030

AE001-901659-00

20,0

20,0

AE001-901459-00

12,0

16,4

AH275-RG1121

AE001-901659-00

20,0

20,0

AE001-901459-00

12,0

16,4

AH275-RG1131

AE001-901589-00

20,0

30,0

AE001-901474-00

12,0

26,4

Taper pin AE009-905140-00

Roll pin AE009-905150-00 AE009-905160-00

Window Sash Corner connector

Roll pin

AE001-901440-00

AE009-905140-00

AE001-901484-00

AE009-905160-00

AE001-901540-00

AE009-905150-00

AE001-901545-00

AE009-905140-00

AE001-901550-00

AE009-905160-00

AE001-901579-00

AE009-905160-00

AE001-901684-00

AE009-905160-00

Profile

Corner connector for inner shell

Measure b

Measure h

Corner connector for outer shell

Measure b

Measure h

AH275-RG1211

AE001-901579-00

30,5

20,0

AE001-901440-00

7,5

6,0

AH275-RG1214

AE001-901579-00

30,5

20,0

AE001-901440-00

7,5

6,0

AH275-RG1215

AE001-901540-00

30,5

16,4

AE001-901545-00

7,5

12,0

AH275-RG1221

AE001-901684-00

30,5

45,4

AE001-901484-00

7,5

32,0

AH275-RG1222

AE001-901550-00

30,5

34

AE001-901484-00

7,5

32,0 March 2009

RG75 Catalogue

37

Glazing bar Roll pin

Roll pin

AE009-905160-00 AE009-905160-00

Profile

Corner connector for inner shell

Measure b

Measure h

Corner connector for outer shell

Measure b

Measure h

AH275-RG1406

AE001-901569-00

20,0

20,0

AE001-901450-00

12,0

12,0

AH275-RG1411

AE001-901589-00

20,0

30,0

AE001-901469-00

12,0

22,8

www.balkan.gr

RG75 Catalogue

38

Moving corner connector

AH275- RG1211B (outside) * for Bore hole 4.4 mm Diam.

Countersunk screw M 5x12 mm DIN 963

with countersunk screw M 4x8 mm DIN 963

ut Layo ng) ki r (ma re A u a e m s

Countersunk screw M 5x12 mm DIN 963

8.5

rsunk ounte

90째 c

6.5

4

ut Layo king) r a (m ure A a me s

X

5.5

unk

nters

X

ou 90째 c 5.5

W1

X = half of chamber height + wall thickness (90째 measured)

Layout (marking) measure A = 43,8mm +

x tan W1

Moving corner connector

Window frame

inside

Profile

Countersunk screw DIN 963

AH275-RG1121 AH275-RG1131

Window sash

outside Measure X

Countersunk screw DIN 963

Measure X

M 5X12

12.15

M 5X12

10.35

M 5X12

17.20

M 5X12

15.40

outside

inside

Profile

Countersunk screw DIN 963

Measure X

Countersunk screw DIN 963

Measure X

AH275-RG1211

M 5X20

12.15

M 4X8

5.2

March 2009

RG75 Catalogue

39 Roll pin

Door frame

AE009-905160-00

Roll pin AE009-905160-00

Profile

Corner connector for inner shell

Measure b

Measure h

Corner connector for outer shell

Measure b

Measure h

AH275-RG2300

AE001-901654-00

29,5

34,0

AE001-901494-00

12,0

34,0

AH275-RG2310

AE001-901654-00

29,5

34,4

AE001-901494-00

12,0

34,0

Roll pin

Roll pin

AE009-905145-00

AE009-905160-00

Door sash

Profile

Corner connector for inner shell

Measure b

Measure h

Corner connector for outer shell

Measure b

Measure h

AH275-RG2330

AE001-901679-00

22,2

45,4

AE001-901499-00

5,0

45,4

AH275-RG2335

AE001-901679-00

22,2

45,4

AE001-901499-00

5,0

45,4

www.balkan.gr

RG75 Catalogue

40

T - connector

Roll pin

Roll pin

AE009-905160-00

AE009-905150-00

Transom to frame / Mullion to frame Profile

T- connector for inner shell

Measure b

T- connector for outer shell

Measure b

AH275-RG1406

AE003-902046-00

20,0

AE003-902025-00

12,0

AH275-RG1411

AE003-902047-00

30

AE003-902028-00

22,8

March 2009

RG75 Catalogue

41

T - connector

Roll pin

Roll pin

AE009-905160-00

AE009-905160-00

* Check 24 mm measure on frame profile prior to milling!

Roll pin AE009-905150-00

Roll pin AE009-905150-00

Base profile to frame / Base frame to door sash Profile

T- connector for inner shell

Measure b

T- connector for outer shell

Measure b

AH275-RG2395

AE003-902050-00

71,8

AE003-902295-00

68,9

www.balkan.gr

RG75 Catalogue

42

T - connector

Roll pin AE009-905160-00

Roll pin AE009-905160-00

* Check 24 mm measure on frame profile prior to milling!

Window frame to window frame Profile

T- connector for inner shell

Measure b

T- connector for outer shell

Measure b

AH275-RG1121

AE003-902046-00

20,0

AE003-902026-00

16,4

AH275-RG1131

AE003-902047-00

30,0

AE003-902033-00

22,8

March 2009

RG75 Catalogue

43

T - connector

Roll pin

Roll pin

AE009-905160-00

AE009-905150-00

* Check 24 mm measure on frame profile prior to milling!

Transom bar to sash Profile

T- connector for inner shell

Measure b

T- connector for outer shell

Measure b

AH275-RG1245

AE003-902046-00

20,0

AE003-902025-00

12,0

www.balkan.gr

RG75 Catalogue

44

Accessories

AE011-903325-00

AE011-903327-00

Sealing element at top on 2-sash doors, with door sash profiles AH275-RG2330 and AH275-RG2335 Access sash acc.to DIN left

Sealing element at top on 2-sash doors, with door sash profiles AH275-RG2330 and AH275-RG2335 Access sash acc.to DIN left

AE011-903330-00

AE011-903332-00

Sealing element at top on 2-sash doors, with door sash profiles AH275-RG2330 and AH275-RG2335 Access sash acc.to DIN left

Sealing element at top on 2-sash doors, with door sash profiles AH275-RG2330 and AH275-RG2335 Access sash acc.to DIN left

AE005-000004-02 Pair of sealing element for double sash (rebate profile) profile AH275-RG1260 with rebate profile acc. to DIN right, at top with rebate profile acc. to DIN left, at bottom (glue-in and screw down)

AE005-000007-02 Sealing element for transom mullion AH275-RG1261 perimetrical mechanism

AE011-903022-00 Central Gasket Corner

0 10

B FW 90

30

05

AE011-903005-00 Glass Support

39

March 2009

RG75 Catalogue

45

11,1

3

4

8,4

38,4

AE004-904015-00

AE004-904035-00

AE004-000004-00

AE013-929170-00

Stroke gasket for window sash profile EPDM, black

Stroke gasket for doors profile EPDM, black

Gasket EPDM for bottom rail RG75

Adapter for AH900-TF269, PVC black

5,5-7,5

27,5

27,5

7,5-9,5

10,5

AE004-904285-00

AE004-904003-20

AE004-904003-25

Central gasket corner moulding 50x50mm EPDM, black

Glazing gasket inside, 6.5 mm EPDM, black

Glazing gasket inside, 8.5 mm EPDM, black

30,5

22

4

4

ATTENTION: For the determination of the U values the gaskets AE004-904003-20, AE004-904003-30 have been used in the calculations.

60

AE004-904003-30

FP004-018-0004

Glazing gasket outside, 4.0 mm EPDM, black

Base profile 60 x 22 mm PVC, white

7 4

8

18

AE009-905140-00 Roll pin for corner connectors AE001-901440-00

5

AE009-905160-00 Roll pin for corner and T-connectors

18

AE009-905145-00 Roll pin for corner connectors AE001-901499-00

13,5

7

AE009-905150-00 Roll pin for corner and T-connectors

AE009-000002-00 Sping pin for bottom rail RG75

www.balkan.gr

12

30

AA331-012-02-01 Brushes No 12mm

2

5

RG75 Catalogue

46

SECTIONS OVERVIEW Views From Outside

1

2

5

4

Fixed

Fixed

Sash

4

6 6

7

8

Sash

Fixed

3

2

2 5+1

5

5 5

Fixed

5 4

5

Sash 6

6 1

5

3

5

Sash

2

5

2

6

7

5

5

6 4

Sash

9

2

2 Sash

8

6

Sash

4

5

Fixed

5

6

Rebate

4

5

2

2

6 5

10

7

Fixed

Sash

5

5 4

1

2

3

Fixed

8

3

Fixed

4

2

5

11

3

1

5

2

3

Sash

1

2+4

5

Sash 70 Fixed

5

5

5

5

5

6

6 5+4

5

9

4

7

6

Sash

8

4 Sash 6

Sash 6

Sash

4

Sash 6

Sash

Sash

5

3 5+4

4

Sash

5

5 4

3

3

Sash 3

Fixed

5

2 Fixed 3

4

2

Fixed

6

1

12

7

Spandrel

5

Sash

March 2009

RG75 Catalogue

39

2

2

1

46

38

39

41

Sash

44

Optionally used sash

(48)

Optionally used sash

33

(48)

39 39

41 34

34

Sash

47

47

38

43 45

(48)

46 46 39 41 42

Fixed

Sash

46

32

32 35

39 2

Active sash

(48)

Active sash

36

Fixed

46

(48)

1

33

40

40

41

43

43

Sash

46

Sash

43

34

46

www.balkan.gr

33

Fixed

44

Optionally used sash

34

39

34

Active sash

33

45

Active sash

34

Optionally used sash

46

2 Fixed

38 Sash

2

47

1

33

39

46

Fixed

2

(48)

46

42

47

Fixed

Sash

32

38

(48)

1

32

Optionally used sash

Active sash

Sash

37

43

37

2

45

46

46 2

Fixed

43

31

39

1

(48)

2 Fixed

32

Active sash

2

46

(48)

47

1

33

44

Optionally used sash

Sash

2

(48)

46

Fixed

47

Fixed

Sash

(48)

31

(48)

34

46

42

(48)

1

(48)

2

50

43

32

34

2

2

34 33

Sash

46

Sash

46

Sash

34

33

(48)

Section numbers inside brackets are door sashes with bottom double seals

34

33

(48)

32

31

Door sash inward opening

41

Sash 43

32

39

38

Fixed

(48)

SECTIONS OVERVIEW Views From Outside

47

RG75 Catalogue 2

1

2

1

54

51

52

52

52

46

65

Sash

46

65

46

Sash

52

62

54

53

45

52

51

44

52

50

63

54

53

Sash

54

2

2

54

Section numbers inside brackets are door sashes with bottom double seals

53

52

51

Door sash outward opening

61

Sash 63

52

39

38

Fixed

65

SECTIONS OVERVIEW Views From Outside

39

2

48

46 39

(65)

46

(65)

61

60

46 39

(65)

47

47

54

Sash

39

38

39

54

Active sash

46

Active sash

44

53

54

Optionally used sash

46

45

53

61

61

61

61

Sash

(65)

46

46

39

Optionally used sash

Optionally used sash

46

62

Fixed

38

63

54

(65)

46

1

Sash

44

Active sash

(65)

Active sash

53

2

Fixed

2

2

63

63

63

Sash

1

63

54

39

60

53

Sash

47

47

54

Fixed

45

38 Sash

61

63 62

2

46

(65)

2

Optionally used sash

39

(65)

63

37 1

Fixed

53

46

38 Sash

Fixed

1

(65)

46 2

37

2

Fixed

Sash

(65)

39

1 Fixed

63

Optionally used sash

Active sash

(65)

2 Fixed

(65)

1

53

Active sash

2

46

47

47

Optionally used sash

Sash

2

46

(65)

Fixed

(65)

Fixed

Sash

March 2009

RG75 Catalogue Section 1/2 mirror-inverted Frame dimension = 34

Rebate dimension = 7

AH275-RG1121

Glazing dimension =

58

AE004-904003-30

Section 1/2 mirror-inverted Frame dimension = 44

Rebate dimension = 7 Glazing dimension =

AH275-RG1131

68

www.balkan.gr

AE004-904003-30

49

7

Frame dimension =

Rebate dimension =

Glazing dimension =

AE004-904003-30

34

AH275-RG1121

58

50

RG75 Catalogue

Section 3

FP004-018-0004

March 2009

RG75 Catalogue

51

Section 4/5 mirror-inverted Frame dimension = 28

Sash dimension = 51

Rebate dimension = 7 Glazing dimension =

AE004-904015-00

AH275-RG1211

AH275-RG1121

AE004-904285-00

6

58

39

AE004-904003-30

Section 4/5 mirror-inverted Frame dimension = 38

Sash dimesnion = 77 7

Rebate dimension = Glazing dimension =

AH275-RG1221

AE004-904015-00 AH275-RG1131

AE004-904285-00

68

www.balkan.gr

6

65

AE004-904003-30

RG75 Catalogue

52

Section 4/5 mirror-inverted Frame dimension = 28

Sash dimension = 51

Rebate dimension = 7

AE004-904015-00

Glazing dimension =

AH275-RG1215

AH275-RG1121

AE004-904285-00

58

6

AE004-904003-30

39

Section 4/5 mirror-inverted Frame dimension = 38

Sash dimesnion = 77

Rebate dimension = 7

Glazing dimension =

AH275-RG1222

AE004-904015-00

AH275-RG1131

AE004-904285-00

68

6

65

AE004-904003-30

March 2009

AE004-904285-00

FP004-018-0004

www.balkan.gr AE004-904015-00

51

AH275-RG1211

6

7

39

Frame dimension =

Sash dimension =

Rebate dimension =

Glazing dimension =

AE004-904003-30

38

AH275-RG1131

68

RG75 Catalogue 53

Section 6

Frame dimension =

Sash dimension =

Rebate dimension =

Glazing dimension =

7

39

AH275-RG1211

6

51

AE004-904015-00

AE004-904285-00

58

28

AH900-TF368

34

AH275-RG1121

58

7

Frame dimension =

Glazing dimension =

AE004-904003-30

54

RG75 Catalogue

Section 7 (connection between two frames)

March 2009

80

Glazing dimension =

AE004-904003-30

www.balkan.gr

58 AH275-RG1121

28

58

AE004-904285-00

AE004-904015-00

51

6

AH275-RG1211

39

7

AE004-904003-30

Glazing dimension =

Rebate dimension =

Sash dimension =

Frame dimension =

RG75 Catalogue 55

Section 7 (in case of 90o corner)

Frame dimension =

7 AH275-RG1121

AH275-RG1750

80

RG75 Catalogue

56

Section 7

Frame dimension= Sash dimension= 38

Rebate dimension=

Rebate dimension=

16

22

7

Glazing dimension=

51 7

Glazing dimension=

AE004-904015-00 AH275-RG1411

AE004-904285-00

AE004-904003-30 92

39

6

Section 8 Frame dimension= Sash dimension=

Glazing dimension=

38

51

Rebate dimension= 7

AH275-RG1211

16

Rebate dimension= 22

7

Glazing dimension=

AE004-904015-00

AE004-904285-00

AE004-904003-30

39

6

92

March 2009

www.balkan.gr

Glazing dimension=

Rebate dimension=

39

7

Sash dimension=

Frame dimension=

6

AH275-RG1211

51

92

AH275-RG1411

32

6

AH275-RG1211

51

39

7

RG75 Catalogue 57

Section 9 AE004-904003-3

AE004-904285-00

AE004-904015-00

RG75 Catalogue

58

AE011-903345-00 Sealing element

AE011-903347-00 Sealing element

for double sash (rebate profile ) profile AH275-RG1260, with rebate profile acc. to DIN right, at top with rebate profile acc. to DIN left, at bottom (glue - in and screw down)

for double sash (rebate profile ) profile AH275-RG1260, with rebate profile acc. to DIN right, at bottom with rebate profile acc. to DIN left, at top (glue - in and screw down)

Glazing dimension=

39

Rebate dimension=

AE004-904003-30

6 66

AH275-RG1260

51

AH275-RG1211

7

Sash dimension=

Section 10

AH275-RG1211

AE004-904285-00

39

Glazing dimension=

7 Rebate dimension=

Sash dimension=

Frame dimension=

6

2

51

34

6

AE004-904015-00

March 2009

www.balkan.gr

Glazing dimension=

Rebate dimension=

6

56

6

66

AH275-RG1261

AE004-904015-00

44

7

Sash dimension=

Frame dimension= 56

6

44

AH275-RG1215

7

Rebate dimension= Glazing dimension=

Sash dimension=

RG75 Catalogue 59

AE004-904003-30

AE004-904285-00

RG75 Catalogue

60

Section 11 (transom / mullion) Frame dimension = 34

Rebate dimension =

Rebate dimension = 7

Glazing dimension =

AH275-RG1406

75

Glazing dimension =

7

82

AE004-904003-30

March 2009

RG75 Catalogue

61

Section 12 (transom for sash) Frame dimension=

34

Rebate dimension= Glazing dimension=

7

Rebate dimension= 7

Glazing dimension=

85

AH275-RG1245

82

www.balkan.gr

AE004-904003-30

RG75 Catalogue

62

Section 31/32 mirror-inverted Frame dimension= 50

Sash dimension= 6

44

74

Rebate dimension= AH275-RG2330

AH275-RG2300

7

Glazing dimension=

AE004-904035-00

70

6

72

AE004-904003-30

Section 33/34 mirror-inverted Frame dimension= 48

Sash dimension=

4

44

74

Rebate dimension= AH275-RG2330

AH275-RG1131

7

Glazing dimension=

AE013-929170-00

AH900-TF269

AE004-904035-00

68

6

72

AE004-904003-30

March 2009

RG75 Catalogue

63

Frame dimension=

Rebate dimension =

Glazing dimension =

AH275-RG1411

AE004-904003-30

Reabate dimension =

Glazing dimension =

Section 37

Section 38/39 mirror-inverted Frame dimension= 38

Sash dimension= 51

Rebate dimension=

AH275-RG1211

7

Glazing dimension=

AE004-904015-00 AH275-RG1311

AE004-904285-00

68

www.balkan.gr

6

39

AE004-904003-30

Frame dimension=

Rebate dimension =

7 38

51

AH275-RG1211

6

7

39

Sash dimension =

Rebate dimension =

Glazing dimension =

AE004-904003-30

Glass dimension =

AH275-RG1411

92

64

RG75 Catalogue

Section 40

AE004-904285-00

AE004-904015-00

March 2009

www.balkan.gr

Frame dimension =

AH900-TF269

74

AE013-929170-00

Sash dimension =

7

AH275-RG2330

6

4

38

AH275-RG1411

92

51

AH275-RG1211

6

7

39

Sash dimension =

Rebate dimension =

Glazing dimension =

AE004-904003-30

Rebate dimension =

Glazing dimesnion =

72

RG75 Catalogue 65

Section 41

AE004-904015-00

AE004-904035-00

Glazing dimension =

Rebate dimension =

Sash dimension =

7

AH900-TF269

AE004-904035-00

92

AH275-RG1411

44

4

6

AH275-RG2330

74

72

7

Glazing dimesnion =

Rebate dimension =

Sash dimension =

Frame dimension =

66

RG75 Catalogue

Section 42/43 mirror-inverted AE004-904003-30

AE013-929170-00

March 2009

Frame dimension=

www.balkan.gr

Glazing dimension=

Rebate dimension=

Sash dimension=

7

98

AH275-RG2335

48

6

10

10

6

74

72

AH275-RG2330

7

Glazing dimension=

Rebate dimension=

Sash dimension=

RG75 Catalogue 67

Section 44/45 mirror-inverted AE004-904003-30

AE004-904035-00

7

Frame dimension =

Rebate dimension =

Glazing dimension =

AE004-904003-30

109

AH275-RG2395

133

68

RG75 Catalogue

Section 47

March 2009

RG75 Catalogue

69

Section 51/52 mirror-inverted Frame dimension= 76

Sash dimension=

70

6

48

Rebate dimension= 7

AH275-RG2310

44 50

www.balkan.gr

AE004-904035-00

AH275-RG2335

6

98

Glazing dimension=

AE004-904003-30 Sash dimension=

RG75 Catalogue

70

Section 53/54 mirror-inverted Frame dimension= 100

Sash dimension=

94

6

48

Rebate dimension=

50

44

7

AH275-RG2350

AH275-RG1131

Glazing dimension=

AH275-RG2335 AE004-904035-00

68

6

98 AE004-904003-30 Sash dimension=

74

92

March 2009

7

AH275-RG2335

www.balkan.gr 6

AE004-904035-00

88

22

AH275-RG1411

92

16

AE004-904285-00 AE004-904015-00 51

6

Rebate dimension=

Glazing dimension=

Glazing dimension=

Sash dimension=

7

AH275-RG1211

39

Section 61

50

AH275-RG2350

6

AE004-904003-30

48

98

RG75 Catalogue 71

Frame dimension =

Glazing dimension=

Rebate dimension =

Sash dimension =

7

92

AH275-RG1411

44

AH275-RG2350

6

50

6

98

AH275-RG2335

48 7

Frame dimension =

Glazing dimension=

Rebate dimension =

Sash dimension =

72

RG75 Catalogue

Section 62/63 mirror-inverted AE004-904003-30

AE004-904035-00

March 2009

AH275-555

www.balkan.gr 82

AH275-RG2330

106

7

AH900-TF403B Frame dimension =

Rebate dimension =

Glazing dimension =

AE004-904003-30

8

19,5

RG75 Catalogue 73

8

19,5 82

AH900-TF403B

AH900-TF419B

AH275-RG2335

106

7

AE004-904003-30

Glazing dimension = Rebate dimension = Frame dimension =

74

RG75 Catalogue

AH275-555

March 2009

8

www.balkan.gr 19,5

AH275-555 82

AH275-RG2335

AH900-TF403

AH900-TF419

106

7

AE004-904003-30

Glazing dimension = Rebate dimension = Frame dimension =

RG75 Catalogue 75

AH275-555 82

AH275-RG2330

106

7

Glazing dimension = Rebate dimension = Frame dimension =

AE004-904003-30

8

19,5

76

RG75 Catalogue

AH900-TF403

March 2009

RG75 Catalogue

77

Section Insert frame RG75 Series for facade

POST

103,5

25 30,5

13 6,5

73 51

24

22

AH275-RG1211 AE004-904015-00

21

AE004-904285-00

24

AH275-5075030

11

56

12 4,5 50

CENTER LINE

www.balkan.gr

6 101 105,5

39

AE004-904003-30

RG75 Catalogue

78

Section Insert frame RG75 Series for facade Door inward opening

56

AH275-5075030

AE013-929170-00

CENTER LINE

POST

11

50

12

4,5

6,5

30

4

AH900-TF269

AE004-904035-00

6

136,5

138,5

74

96

AH275-RG2330

72

22

24

AE004-904003-30

March 2009

RG75 Catalogue

79

Section Insert frame RG75 Series for facade 75 Door outward opening

98

AH275-RG2335

162,5

164,5

6

48

70

7

22

24

AE004-904003-30

6

AH275-RG2350

56

AH275-5075030

POST www.balkan.gr

CENTER LINE

11

50

12

4,5

6,5

30

80

50

AE004-904035-00

RG75 Catalogue

80

Turn, Turn and Tilt Window

GB1

Profiles AH275-RG1121

Window frame (horizontal)

Pcs 2

Dimension L

Cutting 45° - 45°

AH275-RG1121

Window frame (vertical)

2

H

AH275-RG1211

Window sash (horizontal)

2

L-56

( = SW)

45° - 45°

( = SH)

45° - 45°

Window sash (vertical)

2

H-56

Glazing bead horizontal

2

SW-102

90° - 90°

45° - 45°

GB2

Glazing bead vertical

2

SH-146

90° - 90°

Dimension 2L+2H

AE004-904285-00 Central gasket

2L+2H

AE004-904003-20 Glazing gasket inside

2L+2H

AE004-904003-30 Glazing gasket outside

2L+2H

Optional AE011-903022-00 Vulcanized corner joints

Pcs. 4

For sash

Pcs 1

Length SW-116

Height SH-116

AE004-90403-20

AE004-904015-00 AH275-RG1211

Glass Glass

AE004-904285-00

AH275-RG1121

Same dimensions for AH275-RG1214

AE004-904003-30

Gaskets AE004-904015-00 Stroke gasket inside

H

SH

AH275-RG1211 GB1

SW AE004-904015-00 AH275-RG1211 AE004-904285-00

AH275-RG1121

GB2

AE004-90403-20

AE004-904003-30

L

March 2009

RG75 Catalogue

81

H

H

Turn, Turn and Tilt Window

L

L

GB1

Profiles AH275-RG1131

Window frame (horizontal)

Pcs 2

Dimension L

Cutting 45° - 45°

AH275-RG1131

Window frame (vertical)

2

H

AH275-RG1221

Window sash (horizontal)

2

L-76

( = SW)

45° - 45°

AH275-RG1221

Window sash (vertical)

2

H-76

( = SH)

45° - 45°

GB1

Glazing bead horizontal

2

SW-154

90° - 90°

GB2

Glazing bead vertical

2

SH-198

90° - 90°

Dimension 2L+2H

AE004-904285-00 Central gasket

2L+2H

AE004-904003-20 Glazing gasket inside

2L+2H

AE004-904003-30 Glazing gasket outside

2L+2H

H AE004-904003-30

Gaskets AE004-904015-00 Stroke gasket inside

SH

45° - 45°

AE004-90403-20

Pcs 1

For sash

AH275-RG1221

Length SW-168

Height SH-168

AE004-904285-00

AH275-RG1131

Glass Glass

Pcs. 4

AE004-904015-00

Optionally AE011-903022-00 Vulcanized corner joints

Same dimensions for AH275-RG1222 SW AE004-904015-00

00-510409-400EA

AH275-RG1221

1221GR-572HA

1311GR-572HA

AE004-904285-00

AH275-RG1131

GB2

AE004-90403-20 00-582409-400EA

AE004-904003-30

L

www.balkan.gr

RG75 Catalogue

82

AE004-904285-00

AH275-RG1121

H

AE004-904015-00

AH275-RG1211

Turn, Turn and Tilt Window

L AE004-904003-30

GB3 AE004-90403-20

Dimension L

Cutting 45° - 45°

AH275-RG1121

Window frame (vertical)

2

H

AH275-RG1211

Window sash (horizontal)

2

L1-31

( = SW1)

45° - 45°

45° - 45°

AH275-RG1211

Window sash (horizontal)

2

L2-31

( = SW2)

45° - 45°

AH275-RG1211

Window sash (vertical)

4

H-56

( = SH)

45° - 45°

AH275-RG1260

Rebate profile

1

GB1

Glazing bead horizontal (right) 2

SH-72

90° - 90°

SW1-102

90° - 90°

GB2

Glazing bead horizontal (left) 2

SW2-102

90° - 90°

GB3

Glazing bead vertical

SH-146

90° - 90°

4

Gaskets AE004-904015-00 Stroke gasket inside

Dimension 2L+3H

AE004-904285-00 Central gasket

2L+3H

AE004-904003-20 Glazing gasket inside

2L+4H

AE004-904003-30 Glazing gasket outside

2L+4H

Optionally AE011-903022-00 Vulcanized corner joints

Pcs. 8

H

Pcs 2

AE004-904003-30

Window frame (horizontal)

SH

Profiles AH275-RG1121

AE004-90403-20

Length SW1-116

Height SH-116

Glass2

For left sash

1

SW2-116

SH-116

Same dimensions for AH275-RG1214 SW2

SW1 AE004-904015-00

AE004-904015-00 AH275-RG1211

GB3

GB3

AE004-90403-20

AE004-904003-30

AE004-90403-20

AE004-904003-30

AE004-904015-00 AH275-RG1211

AH275-RG1211 AE004-904285-00

AE004-904285-00

AH275-RG1211 AH275-RG1121

AE004-904285-00

GB3

AE004-90403-20

AE004-904003-30

AH275-RG1260

L2

GB3

AE004-90403-20

AE004-904285-00

Pcs 1

AH275-RG1121

For right sash

AH275-RG1211

Glass Glass1

AE004-904015-00

GB1, GB2

AH275-RG1121

AE004-904003-30

L1 L

March 2009

RG75 Catalogue

83

H

Turn, Turn and Tilt Window

L

Profiles AH275-RG1131

Window frame (horizontal)

Pcs 2

Dimension L

AH275-RG1131

Window frame (vertical)

2

H

AH275-RG1221

Window sash (horizontal)

2

L1-41

( = SW1)

45° - 45°

AH275-RG1221

Window sash (horizontal)

2

L2-41

( = SW2)

45° - 45°

AH275-RG1221

Window sash (vertical)

4

H-76

( = SH)

45° - 45°

AH275-RG1260

Rebate profile

1

SH-72

90° - 90°

GB1

Glazing bead horizontal (right) 2

SW1-154

90° - 90°

GB2

Glazing bead horizontal (left) 2

SW2-154

90° - 90°

GB3

Glazing bead vertical

SH-198

90° - 90°

AE004-904285-00 Central gasket

2L+3H

AE004-904003-20 Glazing gasket inside

2L+4H

AE004-904003-30 Glazing gasket outside

2L+4H

Optionally AE011-903022-00 Vulcanized corner joints

Pcs. 8

H

SH

AE004-90403-20 GB1, GB2

For right sash

Pcs 1

Length SW1-168

Height SH-168

Glass2

For left sash

1

SW2-168

SH-168

AE004-904285-00

AH275-RG1131

Glass Glass1

Same dimensions for AH275-RG1222 SW2 AE004-904015-00

AE004-904003-30

Dimension 2L+3H

AH275-RG1221

Gaskets AE004-904015-00 Stroke gasket inside

45° - 45°

AE004-904015-00

4

Cutting 45° - 45°

SW1 AE004-904015-00

AH275-RG1221

AH275-RG1221

AH275-RG1221

AH275-RG1221

GB3

AE004-904003-30

AE004-904003-30

L2

AE004-904003-30

L1 L

www.balkan.gr

GB3

AE004-904285-00

AE004-904285-00

AH275-RG1131 AE004-904285-00

AH275-RG1131

RG75 Catalogue

84

HM

Turn, Turn and Tilt Window

Dimension L

( = LM-24)

Cutting 45° - 45°

AH275-5075030 Window frame (vertical)

H

( = HM-24)

45° - 45°

AH275-RG1211 Window sash (horizontal)

2

L-87

( = SW)

45° - 45°

AH275-RG1211 Window sash (vertical)

2

H-87

( = SH)

45° - 45°

Glazing bead horizontal

2

SW-102

90° - 90°

Glazing bead vertical

2

SH-146

90° - 90°

Gaskets AE004-904015-00 Stroke gasket inside

Dimension 2L+2H

AE004-904285-00 Central gasket

2L+2H

AE004-904003-20 Glazing gasket inside

2L+2H

AE004-904003-30 Glazing gasket outside

2L+2H

AA010-070-00 Glazing gasket inside

2L+2H

Optional AE011-903022-00 Vulcanized corner joints

Pcs. 4

SH

GB1 GB2

Glass Glass

For sash

Pcs 1

AE004-904015-00 AH275-RG1211

GB1

Length SW-116

AE004-904003-30

2

HM

Profiles Pcs AH275-5075030 Window frame (horizontal) 2

H=HM-24

LM

AE004-904285-00

Height SH-116

AA010-007-00 AH275-5075030

Same dimensions for AH275-RG1214

SW AE004-904015-00

AE004-904285-00

AH275-RG1211

GB2

AE004-90403-20

AE004-904003-30

L=LM-24 LM

March 2009

RG75 Catalogue

85

00-582409-400EA

HM

Turn, Turn and Tilt Window

( = LM-24)

Cutting 45° - 45°

AH275-5075030 Window frame (vertical)

2

H

( = HM-24)

45° - 45°

AH275-RG1211

Window sash (horizontal)

2

L1-46,5

( = SW1)

45° - 45°

AH275-RG1211

Window sash (horizontal)

2

L2-46,5

( = SW2)

45° - 45°

AH275-RG1211

Window sash (vertical)

4

H-87

( = SH)

45° - 45°

AH275-RG1260

Rebate profile

1

SH-72

90° - 90°

GB1

Glazing bead horizontal (right) 2

SW1-102

90° - 90°

GB2

Glazing bead horizontal (left) 2

SW2-102

90° - 90°

GB3

Glazing bead vertical

SH-146

90° - 90°

Gaskets AE004-904015-00 Stroke gasket inside

Dimension 2L+3H

AE004-904285-00 Central gasket

2L+3H

AE004-904003-20 Glazing gasket inside

2L+4H

AE004-904003-30 Glazing gasket outside

2L+4H

AA010-007-00 Glazing gasket inside

2L+2H

Optionally AE011-903022-00 Vulcanized corner joints

Pcs. 8

GB1, GB2

Glass Glass1

For right sash

Pcs 1

Length SW1-116

Height SH-116

Glass2

For left sash

1

SW2-116

SH-116

AH275-5075030 AE004-904015-00 AH275-RG1211

4

AA010-007-00 AH275-5075030

Same dimensions for AH275-RG1214 SW2 AE004-904015-00 AH275-RG1211

SW1 AE004-904015-00 AH275-RG1211 AE004-904285-00

AE004-90403-20

AH275-RG1211

GB3

AE004-904285-00

AE004-904003-30

AE004-904003-30

L2

L1 L=LM-24 LM

www.balkan.gr

GB3

HM

Dimension L

AE004-904003-30

Pcs 2

SH

Profiles AH275-5075030 Window frame (horizontal)

H=HM-24

LM

RG75 Catalogue

86

H

H

Turn, Turn and Tilt Window

GB1

Pcs 2

Dimension L

Cutting 45° - 45°

AH275-RG1121

Window frame (vertical)

2

H

45° - 45°

AH275-RG1215

Window sash (horizontal)

2

L-56

( = SW)

45° - 45°

AH275-RG1215

Window sash (vertical)

2

H-56

( = SH)

45° - 45°

GB1

Glazing bead horizontal

2

SW-112

90° - 90°

GB2

Glazing bead vertical

2

SH-156

90° - 90°

2L+2H

AE004-904003-20 Glazing gasket inside

2L+2H

AE004-904003-30 Glazing gasket outside

2L+2H

Optional AE011-903022-00

Pcs. 4

Glass Glass

Vulcanized corner joints

Pcs 1

For sash

Length SW-126

Height SH-126

AH275-RG1215

AE004-904285-00 Central gasket

AE004-904285-00

AH275-RG1121

Dimension 2L+2H

AE004-904015-00

Gaskets AE004-904015-00 Stroke gasket inside

H

Window frame (horizontal)

AE004-904003-30

Profiles AH275-RG1121

SH

L

L

SW AE004-904015-00 AH275-RG1215 AE004-904285-00

AH275-RG1121

GB2

AE004-90403-20

AE004-904003-30

L

March 2009

RG75 Catalogue

87

H

Turn, Turn and Tilt Window

L

Profiles AH275-RG1121

Window frame (horizontal)

Pcs 2

Dimension L

Cutting 45° - 45°

AH275-RG1121

Window frame (vertical)

2

H

AH275-RG1215

Window sash (horizontal)

2

L1-31

( = SW1)

45° - 45°

AH275-RG1215

Window sash (horizontal)

2

L2-31

( = SW2)

45° - 45°

AH275-RG1215

Window sash (vertical)

4

H-56

( = SH)

45° - 45°

AH275-RG1260

Rebate profile

1

SH-72

90° - 90°

GB1

Glazing bead horizontal (right)

2

SW1-112

90° - 90°

GB2

Glazing bead horizontal (left)

2

SW2-112

90° - 90°

GB3

Glazing bead vertical

4

SH-156

90° - 90°

Dimension 2L+3H

AE004-904285-00 Central gasket

2L+3H

AE004-904003-20 Glazing gasket inside

2L+4H

AE004-904003-30 Glazing gasket outside

2L+4H

Optionally AE011-903022-00 Vulcanized corner joints

Pcs. 8

H AE004-904003-30

Gaskets AE004-904015-00 Stroke gasket inside

SH

45° - 45°

Pcs 1

Length SW1-126

Height SH-126

Glass2

For left sash

1

SW2-126

SH-126

AH275-RG1215

For right sash

AE004-904285-00

AH275-RG1121

Glass Glass1

AE004-904015-00

GB1, GB2

Same dimensions for AH275-RG1214 SW2

SW1 AE004-904015-00

AE004-904015-00 AH275-RG1215

AH275-RG1215

AE004-904015-00 AH275-RG1215

AH275-RG1215

GB3

AE004-90403-20

AE004-904003-30

AE004-904003-30

AE004-90403-20

AE004-904003-30

AH275-RG1260

L2

GB3

AE004-90403-20

AE004-904003-30

L1 L

www.balkan.gr

GB3

AE004-904285-00

GB3

AE004-904285-00

AE004-904285-00

AH275-RG1121 AH275-RG1121

RG75 Catalogue

88

AE004-904285-00 AH275-RG1215

H

AE004-904015-00

AH275-RG1211

Turn, turn and tilt window

AE004-904003-30

L GB3 AE004-90403-20

Pcs

Dimension

Cutting

AH275-RG1121

Window frame (horizontal)

2

L

45° - 45°

AH275-RG1121

Window frame (vertical)

2

H

AH275-RG1215

Window sash (horizontal)

2

L1-31

45° - 45° 45° - 45°

AH275-RG1215

Window sash (horizontal)

2

L2-31

( = SW2)

45° - 45°

AH275-RG1215

Window sash (vertical)

4

H-56

( = SH)

45° - 45°

AH275-RG1261

Rebate profile

1

SH-72

90° - 90°

GB1

Glazing bead horizontal (right)

2

SW1-102

90° - 90°

GB2

Glazing bead horizontal (left)

2

SW2-102

90° - 90°

GB3

Glazing bead vertical

4

SH-146

90° - 90°

Dimension

AE004-904015-00

Stroke gasket inside

2L+3H

AE004-904285-00

Central gasket

2L+3H

AE004-904003-20

Glazing gasket inside

2L+4H

AE004-904003-30

Glazing gasket outside

2L+4H

AE004-904003-30

Gaskets

H

( = SW1)

Hs

Profiles

AE004-90403-20

Optionally

GB1, GB2

8

Pcs

Length

Height

Glass1

For right sash

1

SW1-116

SH-116

Glass2

For left sash

1

SW2-116

SH-116

AE004-904285-00 AH275-RG1121

Glass

AH275-RG1215

Vulcanized corner joints

AE004-904015-00

AE011-903022-00

Pcs.

Same dimensions for AH275-RG1214

SW2

SW1 AE004-904015-00

AE004-904015-00

AH275-RG1211

GB3

GB3

AE004-90403-20

AE004-904003-30

GB3

AE004-90403-20

AE004-904003-30

AE004-904285-00

AH275-RG1121

AE004-904285-00

AH275-RG1215

AE004-90403-20

AH275-RG1215

AH275-RG1261

L2

AH275-RG1121

AE004-904003-30

L1 L

March 2009

RG75 Catalogue

89

AH275-RG2330

H

AH275-RG2300

Inward Opening Door

L GB1

Profiles AH275-RG2300

Door frame (top)

Pcs 1

Dimension L

Cutting 45° - 45°

AH275-RG2300

Door frame (left)

1

H

90° - 45°

H L-100

45° - 90° ( = SW)

45° - 45°

AH275-RG2330

Door sash (left)

1

H-58

( = SH)

90° - 45°

AH275-RG2330

Door sash (right)

1

H-58

( = SH)

45° - 90°

AH275-RG2395

Base profile

1

SW-148

90° - 90°

GB1

Glazing bead horizontal

2

SW-148

90° - 90°

GB2

Glazing bead vertical

2

SH-227

90° - 90°

Gaskets AE004-904035-00 Stroke gasket inside + outside

Dimension 2L+4H

AE004-904003-30 Glazing gasket outside

1L+2H

AE004-904003-20 Glazing gasket inside

1L+2H

Glass Glass

Pcs 1

GB1

Length SW-162

Height SH-197

8

For sash

H

1 1

AH275-RG2395

Door frame (right) Door sash (top)

SH

AH275-RG2300 AH275-RG2330

SW AH275-RG2300

AH275-RG2330

AH275-RG2330 GB2

AE004-90403-20

AE004-904035-00

www.balkan.gr

AE004-904003-30

L

AH275-RG2300

RG75 Catalogue

90

AH275-RG2310 AH275-RG2335

AE004-904035-00

H

Outward Opening Door

L

Profiles AH275-RG2310

Door frame (top)

Pcs 1

Dimension L

Cutting 45° - 45°

AH275-RG2310

Door frame (left)

1

H

90° - 45°

AH275-RG2310

Door frame (right)

1

H

45° - 90°

AH275-RG2335

Door sash (top)

1

L-100

45° - 45°

AH275-RG2335

Door sash (left)

1

H-58

( = SH)

90° - 45°

AH275-RG2335

Door sash (right)

1

H-58

( = SH)

45° - 90°

Base profile

1

SW-148

90° - 90°

Glazing bead horizontal

2

SW-148

90° - 90°

GB2

Glazing bead vertical

2

SH-227

90° - 90°

Dimension 2L+4H

AE004-904003-30 Glazing gasket outside

1L+2H

AE004-904003-20 Glazing gasket inside

1L+2H

For sash

Pcs 1

Length SW-162

Height SH-197

8

AH275-RG2395

Glass Glass

GB1

AE004-904003-30

Gaskets AE004-904035-00 Stroke gasket inside + outside

AE004-90403-20

SH

AH275-RG2395 GB1

H

( = SW)

GB1

AE004-904035-00 AH275-RG2310

AH275-RG2335

AH275-RG2335

AH275-RG2310

GB2

AE004-90403-20

AE004-904003-30

SW L

March 2009

RG75 Catalogue

91

AH275-RG2330

AH275-RG2300

H

Inward Opening Door

L

Door frame (top)

Pcs 1

Dimension L

Cutting 45° - 45°

AH275-RG2300

Door frame (left)

1

H

90° - 45°

AH275-RG2300

Door frame (right)

1

H

45° - 90°

AH275-RG2335

Door sash

1

H-58

( = SH)

45° - 45°

AH275-RG2330

Door sash (left)

2

H-58

( = SH)

90° - 45°

AH275-RG2330

Door sash (right)

1

H-58

( = SH)

45° - 90°

AH275-RG2330

Door sash (top left)

1

L2-40

( = SW2)

45° - 45°

AH275-RG2335

Door sash (top right)

1

L1-40

( = SW1)

45° - 45°

AH275-RG2395

Base profile (left)

1

SW2-148

90° - 90°

AH275-RG2395

Base profile (right)

1

SW1-148

90° - 90°

GB1

Glazing bead horizontal

2

SW1-148

90° - 90°

GB2

Glazing bead horizontal

2

SW2-148

90° - 90°

GB3

Glazing bead vertical

4

SH-227

90° - 90°

SH

H

Profiles AH275-RG2300

GB1, GB2)

AE004-904003-30 Glazing gasket outside

2L+4H

AE004-904003-20 Glazing gasket inside

2L+4H

AH275-RG2395

Dimension 2L+6H

Glass Glass 1

For right sash

Pcs 1

Length SW1-162

Height SH-197

Glass 2

For left sash

1

SW2-162

SH-197

8

Gaskets AE004-904035-00 Stroke gasket inside + outside

SW1 AE004-904035-00 AH275-RG2300

AH275-RG2330

AE004-90403-20

AH275-RG2335

AH275-RG2330

AH275-RG2330

GB3

GB3

AE004-904003-30 SW2 L2

L1

L

www.balkan.gr

AH275-RG2300

RG75 Catalogue

92

AH275-RG2335

H

AH275-RG2310

Outward Opening Door

L

Profiles AH275-RG2310

Door frame (top)

Pcs 1

Dimension L

Cutting 45° - 45°

AH275-RG2310

Door frame (left)

1

H

45° - 90°

AH275-RG2310

Door frame (right)

1

H

AH275-RG2330

Door sash

1

H-58

( = SH)

45° - 90°

AH275-RG2335

Door sash (left)

1

H-58

( = SH)

45° - 90°

Door sash (right)

2

H-58

( = SH)

90° - 45°

Door sash (top left)

1

L2-40

( = SW2)

45° - 45°

( = SW1)

AH275-RG2335

Door sash (top right)

1

L1-40

AH275-RG2395

Base profile (left)

1

SW2-148

SH

AH275-RG2335 AH275-RG2335

H

90° - 45°

45° - 45° 90° - 90°

AH275-RG2395

Base profile (right)

1

SW1-148

90° - 90°

GB1

Glazing bead horizontal

2

SW1-148

90° - 90°

GB2

Glazing bead horizontal

2

SW2-148

90° - 90°

GB3

Glazing bead vertical

4

SH-227

90° - 90°

Dimension 2L+6H

AE004-904003-30 Glazing gasket outside

2L+4H

AE004-904003-20 Glazing gasket inside

2L+4H

8

Gaskets AE004-904035-00 Stroke gasket inside + outside

AH275-RG2395

GB1, GB2

Glass Glass 1

For right sash

Pcs 1

Length SW1-162

Height SH-197

Glass 2

For left sash

1

SW2-162

SH-197 L

SW2 AE004-904035-00 AH275-RG2310

AH275-RG2335

AH275-RG2330

AE004-90403-20

GB3

AE004-904003-30

L2

AH275-RG2335

AH275-RG2335

AH275-RG2310

GB3

SW1 L1

March 2009

RG75 Catalogue

93

AH275-5075030

H

Inward Opening Door

Dimension L

Cutting 45° - 45°

AH275-RG1131

Door frame (left)

1

H

90° - 45°

AH275-RG1131

Door frame (right)

1

H

45° - 90°

AH900-TF269

Aditional profile (top)

1

L-78

45° - 45°

Aditional profile (left)

1

H-39

90° - 45°

Aditional profile (left)

1

H-39

45° - 90°

AH275-RG2330

Door sash (top right)

1

L1-38

( = SW1)

45° - 45°

AH275-RG2330

Door sash (top left)

1

L2-38

( = SW2)

45° - 45°

AH275-RG2330

Door sash

2

H-56

( = HS)

90° - 45°

AH275-RG2330

Door sash

1

H-56

( = HS)

45° - 90°

AH275-RG2335

Door sash

1

H-56

( = HS)

45° - 90°

AH275-RG2395

Base profile(right)

1

SW1-148

90° - 90°

AH275-RG2395

Base profile(left)

1

SW2-148

90° - 90°

GB1

Glazing bead horizontal (right) 2

SW1-148

90° - 90°

GB2

Glazing bead vertical (right)

2

HS-227

90° - 90°

GB3

Glazing bead horizontal (left)

2

SW2-122

90° - 90°

GB4

Glazing bead vertical (left)

2

HS-227

90° - 90°

Dimension 2L+6H

AE004-904003-30 Glazing gasket outside

1L+4H

AE004-904003-20 Glazing gasket inside

1L+4H

Glass Glass1

For right sash

Pcs 1

Length SW1-162

Height SH-197

Glass2

For left sash

1

SW2-162

SH-197

8

Gaskets AE004-904035-00 Stroke gasket inside + outside

GB1, GB3

AH275-RG2395

AH900-TF269 AH900-TF269

H

Pcs 1

AE004-904003-30

Door frame (top)

SH

Profiles AH275-RG1131

AH275-RG2330

L

Cutting dimension for AE013-929170-00 are the same with AH900-TF269 SW1 AE004-90403-20

AH900-TF269 AH275-RG2330

AH275-RG2335

AH275-RG2330

GB2

AH275-RG2330

AE004-904003-30

SW2 L2

L1 L

www.balkan.gr

AH275-RG1131

AE013-929170-00

AE013-929170-00

AH275-RG1131

GB4

AE004-904035-00

RG75 Catalogue

94

AH275-RG1131

H

Outward Opening Door

Door frame (top)

Pcs 1

Dimension L

Cutting 45° - 45°

AH275-RG1131

Door frame (left)

1

H

90° - 45°

AH275-RG1131

Door frame (right)

1

H

45° - 90°

AH275-GR2350

Aditional profile (top)

1

L-83

45° - 45°

AH900-RG2350

Aditional profile (left)

1

H-41,5

90° - 45°

AH900-RG2350

Aditional profile (left)

1

H-41,5

AH275-RG2335

Door sash (top right)

1

L1-64

AH275-RG2335

Door sash (top left)

1

AH275-RG2335

Door sash

2

AH275-RG2335

Door sash

1

AH275-RG2330

Door sash

1

AH275-RG2395

Base profile(right)

1

SW1-148

90° - 90°

AH275-RG2395

Base profile(left)

1

SW2-148

90° - 90°

GB1

Glazing bead horizontal (right) 2

SW1-148

90° - 90°

GB2

Glazing bead vertical

HS-227

90° - 90°

GB3

Glazing bead horizontal (left) 2

SW2-148

90° - 90°

( = SW2)

45° - 45°

( = HS)

90° - 45°

H-82

( = HS)

45° - 90°

H-82

( = HS)

45° - 90°

Gaskets AE004-904035-00 Stroke gasket inside + outside

Dimension 2L+6H

AE004-904003-30 Glazing gasket outside

1L+4H

AE004-904003-20 Glazing gasket inside

1L+4H

AA010-007-00 Glazing gasket inside

1L+2H

SH

L2-64 H-82

GB1, GB3

AE004-904003-30

45° - 45°

H

45° - 90° ( = SW1)

AH275-RG2395

4

AH275-RG2335

Profiles AH275-RG1131

AH275-RG2350

L

For right sash

Pcs 1

Length SW1-162

Height SH-197

Glass2

For left sash

1

SW2-162

SH-197

8

Glass Glass1

SW2 AH275-RG2350 AH275-RG1131

AE004-90403-20 GB2

AH275-RG2335

AH275-RG2330

AE004-904003-30

AE004-904035-00

GB2

AH275-RG2335

AE004-904003-30

SW1 L2

L1 L

March 2009

RG75 Catalogue

95

HM

Inward Opening Door

AH275-5075030

W51 22054

( = LM-24)

Cutting 45° - 45°

AH275-5075030 Door frame (left)

1

H

( = HM-12)

90° - 45°

AH275-5075030 Door frame (right)

1

H

( = HM-12)

45° - 90°

AH900-TF269

Aditional profile (top)

1

L-89

45° - 45°

AH900-TF269

Aditional profile (left)

1

H-44,5

90° - 45°

AH900-TF269

Aditional profile (left)

1

H-44,5

45° - 90°

AH275-RG2330

Door sash (top)

1

L-107

( = SW)

45° - 45°

AH275-RG2330

Door sash (left)

1

H-61,5

( = SH)

90° - 45°

AH275-RG2330

Door sash (right)

1

H-61,5

( = SH)

45° - 90°

AH275-RG2395

Base profile

1

SW-148

90° - 90°

GB1

Glazing bead horizontal

2

SW-148

90° - 90°

GB2

Glazing bead vertical

2

SH-227

90° - 90°

Gaskets AE004-904035-00 Stroke gasket inside + outside

Dimension 2L+4H

AE004-904003-30 Glazing gasket outside

1L+2H

AE004-904003-20 Glazing gasket inside

1L+2H

AA010-007-00 Glazing gasket inside

1L+2H

For sash

Pcs 1

Length SW-162

AH275-RG2395

Glass Glass

GB1

Height SH-197

8

Cutting dimension for AE013-929170-00 are the same with AH900-TF269

SW AA010-007-00 AH275-5075030 AH275-RG2330

AH900-TF269

GB2

AE013-929170-00

AE004-90403-20

AE004-904035-00

AE004-904003-30

AE004-904003-30

L=LM-24 LM

www.balkan.gr

AE004-904003-30

Dimension L

H=HM-12

Pcs 1

SH

Profiles AH275-5075030 Door frame (top)

AH275-RG2330

LM

RG75 Catalogue

96

Outward Opening Door

AH275-RG2350

AH275-5075030

HM

W51 22054

Cutting 45° - 45°

AH275-5075030 Door frame (left)

1

H

( = HM-12)

90° - 45°

AH275-5075030 Door frame (right)

1

H

( = HM-12)

45° - 90°

AH275-RG2350

Aditional profile (top)

1

L-99

45° - 45°

AH275-RG2350

Aditional profile (left)

1

H-49,5

90° - 45°

AH275-RG2350

Aditional profile (left)

1

H-49,5

AH275-RG2335

Door sash (top)

1

L-159

( = SW)

45° - 45°

AH275-RG2335

Door sash (left)

1

H-87,5

( = SH)

90° - 45°

AH275-RG2335

Door sash (right)

1

H-87,5

( = SH)

45° - 90°

AH275-RG2395

Base profile

1

SW-148

90° - 90°

GB1

Glazing bead horizontal

2

SW-148

90° - 90°

GB2

Glazing bead vertical

2

SH-227

90° - 90°

45° - 90°

AE004-904003-30

( = LM-24)

SH

Dimension L

GB1

Dimension 2L+4H

AE004-904003-30 Glazing gasket outside

1L+2H

AE004-904003-20 Glazing gasket inside

1L+2H

AA010-007-00 Glazing gasket inside

1L+2H

Pcs 1

For sash

Length SW-162

Height SH-197 8

Glass Glass

AH275-RG2395

Gaskets AE004-904035-00 Stroke gasket inside + outside

AE004-904003-30

Pcs 1

H=HM-12

Profiles AH275-5075030 Door frame (top)

AH275-RG2335

LM

AA010-007-00 AH275-5075030 AH275-RG2350

AH275-RG2335 GB2 AE004-90403-20

AE004-904035-00

AE004-904003-30

AE004-904003-30

SW L=LM-24 LM

March 2009

RG75 Catalogue

97

HM

Inward Opening Door

AH275-5075030

W51 22054

Profiles AH275-5075030 Door frame (top)

Pcs 1

Dimension L

( = LM-24)

Cutting 45° - 45°

AH275-5075030 Door frame (left)

1

H

( = HM-12)

90° - 45°

AH275-5075030 Door frame (right)

1

H

( = HM-12)

45° - 90°

AH900-TF269

Aditional profile (top)

1

L-89

45° - 45°

AH900-TF269

Aditional profile (left)

1

H-44,5

90° - 45°

AH900-TF269

Aditional profile (left)

1

H-44,5

AH275-RG2330

Door sash (top right)

1

L1-43,5

45° - 90°

L2-43,5

( = SW2)

45° - 45°

2

H-61,5

( = HS)

90° - 45°

AH275-RG2330

Door sash

1

H-61,5

( = HS)

45° - 90°

AH275-RG2335

Door sash

1

H-61,5

( = HS)

45° - 90°

AH275-RG2395

Base profile(right)

1

SW1-148

90° - 90°

AH275-RG2395

Base profile(left)

1

SW2-148

90° - 90°

GB1

Glazing bead horizontal (right) 2

SW1-148

90° - 90°

GB2

Glazing bead vertical (right)

2

HS-227

90° - 90°

GB3

Glazing bead horizontal (left)

2

SW2-148

90° - 90°

GB4

Glazing bead vertical (left)

2

HS-227

90° - 90°

Dimension 2L+6H

AE004-904003-30 Glazing gasket outside

1L+4H

AE004-904003-20 Glazing gasket inside

1L+4H

Glass Glass1 Glass2

GB1, GB3

1L+2H

For right sash

Pcs 1

Length SW1-162

Height SH-197

For left sash

1

SW2-162

SH-197

8

AA010-007-00 Glazing gasket inside

HM

1

Cutting dimension for AE013-929170-00 are the same with AH900-TF269

SW1

AA010-007-00 AH275-5075030

AE004-90403-20

AH900-TF269

GB4

AH275-RG2335

AH275-RG2330

GB2

AH275-RG2330

AE013-929170-00

AH275-RG2330

AE004-904003-30

AE004-904035-00

AE004-904003-30

SW2 L2

L1 L=LM-24 LM

www.balkan.gr

AE004-904003-30

Door sash (top left) Door sash

AH275-RG2395

AH275-RG2330

H=HM-12

45° - 45°

SH

( = SW1)

AH275-RG2330

Gaskets AE004-904035-00 Stroke gasket inside + outside

AH275-RG2330

LM

RG75 Catalogue

98

HM

Outward Opening Door

AH275-5075030

W51 22054

Pcs 1

Dimension L

( = LM-24)

Cutting 45° - 45°

AH275-5075030 Door frame (left)

1

H

( = HM-12)

90° - 45°

( = HM-12)

H

1

L-99

45° - 45°

AH900-TF269

Aditional profile (left)

1

H-49,5

90° - 45°

AH900-TF269

Aditional profile (left)

1

H-49,5

45° - 90°

AH275-RG2335

Door sash (top right)

1

L1-69,5

45° - 45°

1

L2-69,5

( = SW2)

45° - 45°

2

H-87,5

( = HS)

90° - 45°

Door sash

1

H-87,5

( = HS)

45° - 90°

Door sash

1

H-87,5

( = HS)

45° - 90°

AH275-RG2395

Base profile(right)

1

SW1-148

90° - 90°

AH275-RG2395

Base profile(left)

1

SW2-148

90° - 90°

GB1

Glazing bead horizontal (right) 2

SW1-148

90° - 90°

GB2

Glazing bead vertical (right)

HS-227

90° - 90°

GB3

Glazing bead horizontal (left) 2

SW2-148

90° - 90°

GB4

Glazing bead vertical (left)

HS-227

90° - 90°

2

Gaskets AE004-904035-00 Stroke gasket inside + outside

Dimension 2L+6H

AE004-904003-30 Glazing gasket outside

1L+4H

AE004-904003-20 Glazing gasket inside

1L+4H

AA010-007-00 Glazing gasket inside

1L+2H

GB1, GB3

Glass Glass1

For right sash

Pcs 1

Length SW1-162

Height SH-197

Glass2

For left sash

1

SW2-162

SH-197

8

2

AH275-RG2395

AH275-RG2335 AH275-RG2330

HM

Door sash (top left) Door sash

SH

AH275-RG2335 AH275-RG2335

H-HM-12

( = SW1)

45° - 90°

AE004-904003-30

1

Aditional profile (top)

AH275-RG2335

AH275-5075030 Door frame (right) AH275-GR2350

AE004-904003-30

Profiles AH275-5075030 Door frame (top)

AH275-RG2350

LM

SW2

AA010-007-00 AH275-5075030

AE004-90403-20

AH275-RG2350

GB4

AH275-RG2335

AE004-904003-30

AH275-RG2330

GB2

AH275-RG2335

AE004-904035-00

AH275-RG2335

AE004-904003-30

SW1 L2

L1 L=LM-24 LM

March 2009

RG75 Catalogue

99

AH275-RG2330

H

AH275-RG2300

Inward Opening Door

Dimension L

Cutting 45° - 45°

AH275-RG2300

Door frame (left)

1

H

90° - 45°

AH275-RG2300

Door frame (right)

1

H

45° - 90°

AH275-RG2330

Door sash (top)

1

L-100

( = SW)

45° - 45°

AH275-RG2330

Door sash (left)

1

H-58

( = SH)

45° - 45°

AH275-RG2330

Door sash (right)

1

H-58

( = SH)

45° - 45°

AH275-RG2330

Door sash (botom)

1

H-58

( = SW)

45° - 45°

AH275-RG555

Threshold

1

L-108

90° - 90°

AH900-TF403B

Adaptor

1

SW-52

90° - 90°

GB1

Glazing bead horizontal

2

SW-148

90° - 90°

GB2

Glazing bead vertical

2

SH-227

90° - 90°

Dimension 3L+4H

AE004-904003-30 Glazing gasket outside

1L+2H

AE004-904003-20 Glazing gasket inside

1L+2H

AA331-010-02-01 Brush

1L

Glass Glass

Pcs 1

For sash

GB1

Length SW-162

Height SH-197

AH275-RG2330

Gaskets AE004-904035-00 Stroke gasket inside + outside

AE004-904003-30

Pcs 1

AH900-TF403B

Door frame (top)

SH

Profiles AH275-RG2300

H

L

8

AH275-RG555

SW AH275-RG2300

AH275-RG2330

AH275-RG2330 GB2

AE004-90403-20

AE004-904035-00

www.balkan.gr

AE004-904003-30

L

AH275-RG2300

RG75 Catalogue

100

Outward Opening Door

AH275-RG2310 AH275-RG2335

H

AE004-904035-00

OUTWARD OPENING DOOR

L GB1

Cutting 45° - 45°

AH275-RG2310

Door frame (left)

1

H

90° - 45°

AH275-RG2310

Door frame (right)

1

H

45° - 90°

AH275-RG2335

Door sash (top)

1

L-100

45° - 45°

AH275-RG2335

Door sash (left)

1

H-58

( = SH)

45° - 45°

AH275-RG2335

Door sash (right)

1

H-58

( = SH)

45° - 45°

( = SW)

Door sash (bottom)

1

L-58

Adaptor

1

SW-52

45° - 45° 90° - 90°

AH900-TF419B

Adaptor

1

SW-32

90° - 90°

AH275-RG555

Threshold

1

L-108

90° - 90°

GB1

Glazing bead horizontal

2

SW-148

90° - 90°

GB2

Glazing bead vertical

2

SH-227

90° - 90°

Gaskets

Dimension

AE004-904035-00

Stroke gasket inside + outside

3L+4H

AE004-904003-30

Glazing gasket outside

1L+2H

AE004-904003-20

Glazing gasket inside

1L+2H

AA331-010-02-01

Brush

2L

Glass Glass

For sash

GB1

Pcs

Length

Height

1

SW-162

SH-197

AE004-904003-30

AH275-RG2335 AH900-TF403B

H

( = SW)

SH

Dimension L

AH900-TF419B

Pcs 1

AE004-90403-20

Door frame (top)

AH275-RG2335

Profiles AH275-RG2310

8

AH900-TF403B

AH275-RG555 AE004-904035-00 AH275-RG2310

AH275-RG2335

AH275-RG2335

AH275-RG2310

GB2

AE004-90403-20

AE004-904003-30

SW L

March 2009

RG75 Catalogue

101

AH275-RG2330

H

AH275-RG2300

Inward Opening Door

L

Cutting 45° - 45°

AH275-RG2300

Door frame (left)

1

H

90° - 45°

AH275-RG2300

Door frame (right)

1

H

45° - 90°

AH275-RG2335

Door sash

1

H-58

( = SH)

45° - 45°

AH275-RG2330

Door sash (left)

2

H-58

( = SH)

45° - 45°

AH275-RG2330

Door sash (right)

1

H-58

( = SH)

45° - 45°

AH275-RG2330

Door sash (top left)

1

L2-40

( = SW2)

45° - 45°

AH275-RG2330

Door sash (top right)

1

L1-40

( = SW1)

45° - 45°

AH275-RG2330

Door sash (bottom left)

1

L2-40

( = SW2)

45° - 45°

AH275-RG2330

Door sash (bottom right)

1

L1-40

( = SW1)

45° - 45°

AH900-TF403B

Adaptor (bottom left)

1

SW2-35

90° - 90°

AH900-TF403B

Adaptor (bottom right)

1

SW1-38

90° - 90°

AH900-RG555

Threshold

1

L-108

90° - 90°

GB (L1)

Glazing bead horizontal

2

SW1-148

90° - 90°

GB (L2)

Glazing bead horizontal

2

SW2-148

90° - 90°

GB

Glazing bead vertical

4

SH-227

90° - 90°

H

Dimension L

Dimension 2L+6H

AE004-904003-30 Glazing gasket outside

2L+4H

AE004-904003-20 Glazing gasket inside

2L+4H

For right sash

Pcs 1

Length SW1-162

Height SH-197

Glass 2

For left sash

1

SW2-162

SH-197

AH275-RG555

8

Glass Glass 1

AH900-TF403B

Gaskets AE004-904035-00 Stroke gasket inside + outside

AH275-RG2330

GB1

AE004-904003-30

Pcs 1

Door frame (top)

SH

Profiles AH275-RG2300

Same dimensions for AH900-TF403

SW1 AE004-904035-00 AH275-RG2300

AH275-RG2330

AE004-90403-20

AH275-RG2335

AH275-RG2330

AH275-RG2330

AE004-904003-30

SW2 L2

L1 L

www.balkan.gr

AH275-RG2300

RG75 Catalogue

102

Profiles AH275-RG2310

Door frame (top)

Pcs 1

Dimension L

Cutting 45° - 45°

AH275-RG2310

Door frame (left)

1

H

45° - 90°

AH275-RG2310

Door frame (right)

1

H

AH275-RG2330

Door sash

1

H-58

( = SH)

45° - 45°

AH275-RG2335

Door sash (left)

1

H-58

( = SH)

45° - 45°

AH275-RG2335

Door sash (right)

2

H-58

( = SH)

45° - 45°

AH275-RG2335

Door sash (top left)

1

L2-40

( = SW2)

45° - 45°

AH275-RG2335

Door sash (top right)

1

L1-40

( = SW1)

45° - 45°

AH275-RG2335

Door sash (bottom left)

1

L2-40

( = SW2)

45° - 45°

AH275-RG2335

Door sash (bottom right)

1

L1-40

( = SW1)

45° - 45°

AH900-TF403B

Adaptor (bottom right)

1

SW1-38

90° - 90°

AH900-TF419B

Adaptor (bottom right)

1

SW1-32

90° - 90°

AH900-TF403B

Adaptor (bottom left)

1

SW2-38

90° - 90°

AH900-TF419B

Adaptor (bottom left)

1

SW2-32

90° - 90°

AH275-RG555

Threshold

1

L-108

90° - 90°

GB1

Glazing bead horizontal

2

SW1-148

90° - 90°

GB2

Glazing bead horizontal

2

SW2-148

90° - 90°

GB

Glazing bead vertical

4

SH-227

90° - 90°

AH275-RG2335

L

AH275-RG2310

AE004-904035-00

H

Outward Opening Door

90° - 45°

Glass Glass 1

For right sash

Pcs 1

Length SW1-162

Height SH-197

Glass 2

For left sash

1

SW2-162

SH-197

AE004-904003-30

2L+4H

AH900-TF419B

2L+4H

AE004-904003-20 Glazing gasket inside

AH900-TF403B

8

AE004-904003-30 Glazing gasket outside

GB1

AE004-90403-20

Dimension 2L+6H

AH275-RG2335

Gaskets AE004-904035-00 Stroke gasket inside + outside

SH

H

GB1

AH275-RG555

Same dimensions for AH900-TF403 and AH900-TF419 L SW2 AE004-904035-00 AH275-RG2310

AH275-RG2335

AH275-RG2330

AE004-90403-20

GB

AH275-RG2335

AH275-RG2310

GB

AE004-904003-30

L2

AH275-RG2335

SW1 L1

March 2009

RG75 Catalogue C Fixed Frames Corner Joint Assembling

March 2009

www.balkan.gr

RG75 Catalogue C Sash Frames Corner Joint Assembling

March 2009

www.balkan.gr

RG75 Catalogue C Fixed Frame Transom Assembling

CUTTER

March 2009

www.balkan.gr

RG75 Catalogue C Sash Transom Assembling

March 2009

www.balkan.gr

RG75 Catalogue C Fixed Frames Water Drainage and Ventilation System

March 2009

www.balkan.gr

RG75 Catalogue C Sash Water Drainage and Ventilation System

March 2009

www.balkan.gr

RG75 Catalogue C Fitting of the Central Gasket Code AE004-904285-00

AE011-903022-00

March 2009

www.balkan.gr

RG75 Catalogue C Hinge Assembling Diagram

March 2009

www.balkan.gr

RG75 Catalogue C Rods Drilling

Handle Assembling Diagram

Cutting out for Rod Insertion and Accessories Assembling

March 2009

www.balkan.gr

RG75 Catalogue C Rods Machining for Turn Window

March 2009

www.balkan.gr

RG75 Catalogue C Turn and Tilt Window Assembling Diagram

March 2009

www.balkan.gr

RG75 Catalogue C Rods Machining for Locking with Interior Gear

March 2009

www.balkan.gr

RG75 Catalogue C Rods Machining for Locking Mechanisms with Interior Gear

March 2009

www.balkan.gr

RG75 Catalogue C

March 2009

www.balkan.gr

RG75 Catalogue C Glass Spacers Assembling

March 2009

www.balkan.gr

RG75 Catalogue C Fixed Door Frames Corner Joint Assembling

March 2009

www.balkan.gr

RG75 Catalogue C Door Sashes Corner Joint Assembling

March 2009

www.balkan.gr

RG75 Catalogue C Bottom Rail Assembling

March 2009

www.balkan.gr

RG75 Catalogue C Door Hinge Assembly Diagram - Outward Opening

March 2009

www.balkan.gr

RG75 Catalogue C Door Hinge Assembly Diagram - Inward Opening

March 2009

www.balkan.gr

RG75 Catalogue C

AH275-RG555

March 2009

AH275-RG555

www.balkan.gr

RG75 Catalogue C Assembling Diagram for Sill AH900-TF403B and Threshold AH275-RG555 - Inward Opening

March 2009

www.balkan.gr

RG75 Catalogue C Assembling Diagram for Sill AH900-TF419B and Threshold AH275-RG555 - Outward Opening

March 2009

www.balkan.gr

RG75 Catalogue C Accessories Assembling for Sill AH900-TF403B, AH900-TF419B and Threshold AH275-RG555

March 2009

www.balkan.gr

RG75 Catalogue C Double Door Inward Opening Assembling Diagram

March 2009

www.balkan.gr

RG75 Catalogue C Double Door Outward Opening Assembling Diagram

March 2009

www.balkan.gr

RG75 Catalogue C Inward Opening Door - Locking Code AA101-070-00 and Relevant Striking Plate Code AA103-022-00 Assembling Diagram

March 2009

www.balkan.gr

RG75 Catalogue C Outward Opening Door - Locking Device Code AA101-070-00 and Relevant Striking Plate Code AA103-022-00 Assembling Diagram

March 2009

www.balkan.gr

RG75 Catalogue C Inward Opening Door Assembling Diagram

March 2009

www.balkan.gr

RG75 Catalogue C Outward Opening Door Assembling Diagram

March 2009

www.balkan.gr

RG75 Catalogue C Machining for Semifixed Sash Bolt Code AA105-046 Assembling Diagram

March 2009

www.balkan.gr

RG75 Catalogue C Machining for Semifixed Bolt Code AA105-046 Assembling Diagram

March 2009

www.balkan.gr

BALKAN NETWORK GREECE - BALKAN SA www.balkan.gr Head Office: Athens 11th km Nat.Road Athens-Lamia, 144 52 Metamorphosi Tel.: +30 210 2810 030, Fax: +30 210 2845 025 e-mail: info@balkan.gr

Iraklio: +30 2810 370555-6, Fax: +30 2810 311 400 Larissa: +30 2410 555 641-2, Fax: +30 2410 288 919 Τhessaloniki: +30 2310 753 454, Fax: +30 2310 753 455 Τhiva: Tel.: +30 22620 72001-4, Fax: +30 22620 71293 Extrusion Industry 79th km Nat. Road Athens-Lamia, Ipato Thivon Tel.: +30 22620 72001-4, Fax: +30 22620 71293 e-mail: factory@balkan.gr

ROMANIA - BALKAN RO www.balkanro.ro Head Office: Bucharest B-dul Iuliu Maniu 333, Sector 6 Tel.: +40 213 170 695-7-8, Fax: +40 213 160 699 e-mail: balkanro@balkanro.ro

Alba Iulia: +40 258 810 241, Arad: +40 257 288 588, Bacau: +40 234 562 620 Βrasov: +40 286 549 904, Cluj-Napoca: +40 264 415 512, Constanta: +40 241 559 850 Craiova: +40 251 483 323, Iasi: +40 232 244 055, Τimisoara: +40 256 296 114 DEALERS

Galati: Alprovest, tel/fax: +40 236 458 038, Pitesti: Conarg, tel/fax: +40 248 610 089 Satu Mare: Neptun, tel/fax: + 40 261 841 930, Sibiu: Roa Design, tel/fax: +40 269 214 325 Ploiesti: Rolir, tel/fax: +40 244 225 170 UKRAINE - BALKAN UA Head Office: Kiev Moskovsky Av. 6 Tel./Fax: +38 044 464 4947/7858

Κharkov: +380 57 757 5161-2 Odessa: +380 482 328 402, 335 654, 0487 773 389 BULGARIA - BLK BG www.blk-bg.com Ηead Office: Sofia 8 Malashevska Str. 1202 Tel.: +359 2 936 6652/91, Fax:+359 2 936 6735 e-mail: office@blk-bg.com

CZECH REPUBLIC ALUMONT BUILDING A.S. DEALER Hradni-Slazska 27/37, 710 00 Ostrava Tel./Fax: +420 777 800333 e-mail: alumont@alumont.cz www.alumont.cz

RUSSIA MGM LTD DEALER Promzona 16 Str.-Armavir, 352916 Krasnodar Tel./Fax: +7 86137 58100 e-mail: armoz@inbox.ru

BELARUS SOL-FARM DEALER Kalvariyskaya 60/2H, 220073 Minsk Tel./Fax: +37517 204 22 25 e-mail: sol-farm@mail.ru