TF45 Catalogue Contents
1 Katalogdeckblatt
42 Beschlag
2 Katalogseiten- bersicht
43 Beschlag
3 Konstruktionsbeschreibung
44 Befestigung
4 Leichtmetallt ren Serie RD
45 Beschlag
5 Kurzfassung Pr fzeugnis
46 Beschlag
6 Kurzfassung Pr fzeugnis
47 Befestigung
7 Kurzfassung Pr fzeugnis
48 Beschlag
8 Kurzfassung Pr fzeugnis
49 Beschlag
9 Profi le/Eckverbinder/T-Verbinder/Zubeh r
50 Beschlag
10 Zubeh r/Dichtungen/Dichtstoffe
51 Beschlag
11 Befestigungsmaterial/Schrauben/Bohrschablonen
52 Beschlag
12 St ckliste
53 Systembeschreibung
13 St ckliste
54 Systembeschreibung
14 Musterkalkulation
55 Systembeschreibung
15 Musterkalkulation
56 Werksbescheinigung
16 Profi le
57 Fertigungsanleitung
17 Profi le
58 Beschlag
18 Profi le
59 Einbauanleitung/Wartungsanleitung
19 Profi le
60 Typen bersicht
20 Profi le
61 Typen bersicht
21 bersichtsblatt
62 Schnittpunkte
22 Eckverbinder
63 Schnittpunkte
23 T-Verbinder
64 Schnittpunkte
24 T-Verbinder
65 Schnittpunkte
25 T-Verbinder
66 Schnittpunkte
26 Zubeh r
67 Schnittpunkte
27 Zubeh r/Dichtungen
68 Schnittpunkte
28 Befestigungsmaterial
69 Schnittpunkte
29 Zubeh r
70 Schnittpunkte
3
30 Beschlag 31 Beschlag 32 Beschlag 33 Beschlag 34 Beschlag 35 Beschlag 36 Beschlag 37 Beschlag 38 Beschlag 39 Beschlag 40 Beschlag 41 Beschlag
J a n u ary 2008
TF45 Catalogue
4
Profiles
Profiles
20
AH945-TF211 Frame profile
5
5
24
7,5
7,5
Dev. anod.: 284 mm Dev. mech.: 68 mm 40,5
45
W=0.912 kg/m
Accessories: Corner connector profile 10.0mm = TF 385 901 620 Corner connector 90o externally pinned
7,5
Drilling template 907 011
5
901 582 Corner connector moving 41.7mm
10,4
4,5
6,8
44
20
AH945-TF213 Frame profile
7,5
7,5
5
5
48
Dev. anod.: 333 mm
W=1.265 kg/m
45
45
Dev. mech.: 116 mm Accessories: 7,5
Corner connector profile 34.0mm = TF 398 901 010 Corner connector 90o externally pinned 5
Drilling template 907 011
6,8
4,5
901 190 Corner connector moving 41.7mm 34,4 68
April 2 0 0 8
TF45 Catalogue Profiles
5
Profiles
35
20
AH945-TF242 Transom profile
5
Dev. anod.: 399 mm
7,5
7,5
5
20
27
W=1.202 kg/m
Accessories: Corner connector profile 10.0mm = TF 392 901 620 Corner connector 90o externally pinned
24,3
45
40,5
Dev. mech.: 110 mm
Drilling template 907 050 901 582 Corner connector moving 41.7mm 902 010 T- connector Drilling template 907 050
17 75
4,5
9
for screwed butt joint 907 016
J a n u ary 2008
TF45 Catalogue
6
Profiles
Profiles
45 40,5
20
4,5
11
AH945-TF245 Socle profile Dev. anod.: 495 mm
W=2.390 kg/m
123
88
81
143
Dev. mech.: 266 mm
10
18,5
24
40,4
36
AL142-557 Bottom profile Dev. anod.: 117 mm Dev. mech.: - mm
April 2 0 0 8
W=0.301 kg/m
TF45 Catalogue
7
Profiles
Profiles
3
45
AH945-TF260 Post corner profile 900
22,5
5
Dev. anod.: 296 mm
W=1.229 kg/m
5
7,5
48
7,5
Dev. mech.: 76 mm
48
44
AH945-TF291 Dummy mullion ledge Dev. anod.: 261 mm
W=0.638 kg/m
42,9
Dev. mech.: 44 mm
8
44
904 100
906 759
TF 408
TF 408
21
23
6
J a n u ary 2008
TF45 Catalogue
8
Profiles
Profiles 13
4,5
45
7,5
8,5
5
43
18
66
Accessories:
AH945-TF406 Sash profile
Corner connector profile 34.0mm = TF 398 901 010 Corner connector 90o externally pinned
W=1.210 kg/m
Dev. anod.: 296 mm
Drilling template 907 011
Dev. mech.: 109 mm
13
45
45
8,5
4,5
63
5
7,5
18
20
4,5
34,4 66 86
Accessories:
AH945-TF407 Sash profile Dev. anod.: 354 mm Dev. mech.: 129 mm
April 2 0 0 8
Corner connector profile 34.0mm = TF 398 901 010 Corner connector 90o externally pinned
W=1.320 kg/m
Drilling template 907 015
TF45 Catalogue
9
Profiles
Profiles
20
13
45
40,5
7,5
8,5
5
43
18
4,5
4,5
39,4 86
Accessories:
AH945-TF408 Sash profile
Corner connector profile 34.0mm = TF 398 901 010 Corner connector 90o externally pinned
W=1.314 kg/m
Dev. anod.: 354 mm
Drilling template 907 015
13,3
5,3
Dev. mech.: 129 mm
TF945-TF309 Stop ledge W=0,211 kg/m
34,2
45
10
8,5
J a n u ary 2008
TF45 Catalogue
10
Profiles
Profiles
13
TF 273 Glazing rebate strip 20
Dev. anod.: 136 mm
W=0.232 kg/m
Dev. mech.: 33 mm
7,5
5
23
TF 277 Glazing rebate strip
20
Dev. anod.: 180 mm Dev. mech.: 43 mm
5
7,5
27,5
TF 278 Glazing rebate strip
20
Dev. anod.: 186 mm Dev. mech.: 48 mm
5
April 2 0 0 8
W=0.303 kg/m
7,5
W=0.320 kg/m
TF45 Catalogue
11
Gaskets
Gaskets
Roll pin
11.5
8.0
3
6-9,5
AE004-904410-00
AE004-904760-00
EPDM, black
EPDM, black
AE009-905100-00
J a n u ary 2008
12
TF45 Catalogue Profile Systems to DIN 18095 Smoke Control Doors Series TF 45/RD Fittings
Fittings: LM door hinge DORMA No. A 22.1, two-piece, with spacer plate
DORMA drilling template Dimension x = 51.5 mm A Pin dia. y = 5 mm Bore diameter 9 mm Max. sash width 1250 mm Max. sash weight 120 kg April 2 0 0 8
TF45 Catalogue Profile Systems to DIN 18095 Smoke Control Doors Series TF 45/RD Fittings
13
Fittings: LM door hinge GEZE No. TS 16, two-piece, with mounting plate
GEZE drilling template No. TS 17 Drill diameter 11 mm
Max. sash width 1250 mm Max. sash weight 120 kg J a n u ary 2008
14
TF45 Catalogue Profile Systems to DIN 18095 Smoke Control Doors Series TF 45/RD Fittings
Fittings: LM door hinge HAHN No. 5732, two-piece, with mounting plate
HAHN drilling template No. 9230 SN = 5 mm Drill diameter 11 mm Max. sash width 1200 mm Max. sash weight 120 kg April 2 0 0 8
TF45 Catalogue Profile Systems to DIN 18095 Smoke Control Doors Series TF 45/RD Fittings
15
Fittings: Drop latch lock with switch, WS No. 8305, with 9 mm driver
J a n u ary 2008
16
TF45 Catalogue Profile Systems to DIN 18095 Smoke Control Doors Series TF 45/RD Fittings
Fittings: Handle asembly OGRO No. 8350 FS ZW 01, for moving sash
Installation material for OGRO Handle No. 8350 FS ZW 01: 4 off g06 522 Countersunk head screw M5 x 20 DIN 064 4 off 905 260 Blind rivet nut M5, flat round head
Installation material for cylinder rosette : 4 off 906 522 Countersunk head screw M5 x 20 DIN 964
1 off Handle assembly OGRO No. 8350 FS ZW 01 with handle rosette OGRO No. 6689 K FS ZW 1 off standard pin OGRO No. 120 FS-1 ( LI-52, LA-53.5 mm ) (special handle pin OGRO No.: 114 for one-piece driver, 9 x 119 mm long ) 2 off Cylinder rosette OGRO No. 6687 P ZW April 2 0 0 8
TF45 Catalogue Profile Systems to DIN 18095 Smoke Control Doors Series TF 45/RD Fittings
17
Fitting: OGRO door levers Nr. 8350 FS ZW 01, for fixed sashes
1 piece OGRO lever Nr. 8350 FS ZW 01 1 piece lever rosette Nr. 6689 K FS ZW 1 piece special lever pin OGRO Nr. 117 ZW 9 x 62 mm Mounting material: 2 pieces 906 522 Raised countersunk head screw M5 x 20 DIN 964 2 pieces 905 260 Blind rivet nut M5, mushroom head
J a n u ary 2008
18
TF45 Catalogue Profile Systems to DIN 18095 Smoke Control Doors Series TF 45/RD Fittings
Fitting: Lever set FSB Nr. 0662/9 rotatable, firmly mounted on lever rosette Nr. 1770
1 piece lever set FSB Nr. 0662/9 rotatable, firmly mounted on lever rosette Nr. 1770 1 piece massive pin FSB Nr. 0173.34 9x100 mm for undivided nut, (Special pin FSB Nr. 0125 for undivided 9 mm nut) 2 pieces cylindrical rosette FSB Nr. 1755 PZ
Mounting material for cylindrical rosette: 4 pieces 906 520 Raised countersunk head screw M5 x 16 DIN 964 Mounting material for door lever: 4 pieces 906 524 Raised countersunk head screw M5 x 25 DIN 964 4 St ck 905 260 Blind rivet nut M5, musroom head
April 2 0 0 8
TF45 Catalogue Profile Systems to DIN 18095 Smoke Control Doors Series TF 45/RD Fittings
19
Fitting: Door closer system with sliding bars DORMA TS 93 GSR with consequent closing control
Mounting material for double sash door: 8 pieces recessed countersunk head screw M5 x 16 DIN 965 12 pieces recessed countersunk head screw M5 x 50 DIN 965 1 piece recessed raised countersunk head M5 x 20 DIN 7985 21 pieces 905 270 blind rivet nut M5, countersunk head screw 90째
accompanies the fitting
For drilling view and measurement table, see next page J a n u ary 2008
20
TF45 Catalogue Profile Systems to DIN 18095 Smoke Control Doors Series TF 45/RD Fittings
Mounting: Door closer system with sliding bars DORMA TS 93 GSR with consequent closing control
April 2 0 0 8
All indicated drillings 0 7.1 min for blind rivet nut M5, countersunk head screw For drilling view of the IS triggering mechanism and assembly measurement A, see next page
Arrester measures DIN LEFT (corridor sash) for GEZE TS 4000 R-IS
TF45 Catalogue
Mounting of TS 4000 R-IS and secondary devise TS 4000 R with mounting plate in case of overhead mounting
Arrester measures DIN RIGHT (fixed sashes) for the secondary device GEZE TS 4000 R with S triggering mechanism
Profile Systems to DIN 18095 Smoke Control Doors Series TF 45/RD Round mounting
21
Mounting: Geared door closer GEZE TS 4000 R-IS with secondary device TS 4000
J a n u ary 2008
22
TF45 Catalogue Profile Systems to DIN 18095 Smoke Control Doors Series TF 45/RD Fittings
Fitting: IS triggering mechanism GEZE on double sash door for TS 4000 R-IS
April 2 0 0 8
TF45 Catalogue Profile Systems to DIN 18095 Smoke Control Doors Series TF 45/RD Round
23
Fitting: Overhead geared door closer with sliding bar GEZE Nr. TS 5000
Mounting material for single sash door: 4 pieces countersunk head screw M 5 x 20 DIN 963 4 pieces recessed countersunk head screw M 5 x 45 DIN 965 2 pieces recessed countersunk head screw M 5 x 40 DIN 965 6 Piece 905 270 blind rivet nut M 5, countersunk head 90째
accompanies the fitting
J a n u ary 2008
24
April 2 0 0 8
TF45 Catalogue
BALKAN NETWORK GREECE - BALKAN SA www.balkan.gr Head Office: Athens 11th km Nat.Road Athens-Lamia, 144 52 Metamorphosi Tel.: +30 210 2810 030, Fax: +30 210 2845 025 e-mail: info@balkan.gr
Iraklio: +30 2810 370555-6, Fax: +30 2810 311 400 Larissa: +30 2410 555 641-2, Fax: +30 2410 288 919 Τhessaloniki: +30 2310 753 454, Fax: +30 2310 753 455 Τhiva: Tel.: +30 22620 72001-4, Fax: +30 22620 71293 Extrusion Industry 79th km Nat. Road Athens-Lamia, Ipato Thivon Tel.: +30 22620 72001-4, Fax: +30 22620 71293 e-mail: factory@balkan.gr
ROMANIA - BALKAN RO www.balkanro.ro Head Office: Bucharest B-dul Iuliu Maniu 333, Sector 6 Tel.: +40 213 170 695-7-8, Fax: +40 213 160 699 e-mail: balkanro@balkanro.ro
Alba Iulia: +40 258 810 241, Arad: +40 257 288 588, Bacau: +40 234 562 620 Βrasov: +40 286 549 904, Cluj-Napoca: +40 264 415 512, Constanta: +40 241 559 850 Craiova: +40 251 483 323, Iasi: +40 232 244 055, Τimisoara: +40 256 296 114 DEALERS
Galati: Alprovest, tel/fax: +40 236 458 038, Pitesti: Conarg, tel/fax: +40 248 610 089 Satu Mare: Neptun, tel/fax: + 40 261 841 930, Sibiu: Roa Design, tel/fax: +40 269 214 325 Ploiesti: Rolir, tel/fax: +40 244 225 170 UKRAINE - BALKAN UA Head Office: Kiev Moskovsky Av. 6 Tel./Fax: +38 044 464 4947/7858
Κharkov: +380 57 757 5161-2 Odessa: +380 482 328 402, 335 654, 0487 773 389 BULGARIA - BLK BG www.blk-bg.com Ηead Office: Sofia 8 Malashevska Str. 1202 Tel.: +359 2 936 6652/91, Fax:+359 2 936 6735 e-mail: office@blk-bg.com
CZECH REPUBLIC ALUMONT BUILDING A.S. DEALER Hradni-Slazska 27/37, 710 00 Ostrava Tel./Fax: +420 777 800333 e-mail: alumont@alumont.cz www.alumont.cz
RUSSIA MGM LTD DEALER Promzona 16 Str.-Armavir, 352916 Krasnodar Tel./Fax: +7 86137 58100 e-mail: armoz@inbox.ru
BELARUS SOL-FARM DEALER Kalvariyskaya 60/2H, 220073 Minsk Tel./Fax: +37517 204 22 25 e-mail: sol-farm@mail.ru