Profitable choice - since 1962 Made in Finland
DOUBLE DISC CHIPPER UNITS WITH LOADER • loader and chipper are on a special trailer T5000, which is designed just for FARMI - chippers • low investment and maintenance costs compared to drum chipper • chipper is driven straight from a tractor´s PTO without transmission
CHIPPER - TRAILER T5000 - LOG LOADER COMBINATION CHIPPER 380HF / 380HFC 260HF / 260HFC
TRAILER T5000 T5000
LOADERS 4571, 4581 4571, 4581
Profitable choice - since 1962 CHIPPER - FARMI 121 TRAILER - LOG LOADER COMBINATION • loader and chipper are on normal FARMI 121 trailer • chipper is driven through a belt transmission (i=1) from tractor´s PTO • trailer and loader combination can be used separately as a forwarder
CHIPPER 380HF / 380HFC
TRAILER FARMI 121
LOADERS 6167, 6185, 4581, 4571
Profitable choice - since 1962 CHIPPER - LOG LOADER COMBINATION • chipper and log loader together on tractor’s 3-point linkage • quick and easy to connect (and remove) to tractor´s 3-point linkage • both the loader and the chipper can be used separately on tractors 3-point linkage
CHIPPER 260HF / 260HFC
Good chip quality with a double disc
LOADER 4066P
Profitable choice - since 1962 CHIPPER ON 3-POINT LINKAGE - CRANE ON FRAME FITTING • gravity point near the rear axle creates excellent balance for the unit • easy to connect and remove • the crane can also be used separately A front support for the crane for transportation and a separate support leg kit are available as accessory for platform fitting.
Technical information for cranes Max. outreach, m
4066
4571
4581
6167
6185
6,6
7,1
8,1
6,7
8,5
Lifting capacity, max. outreach kg
480
490
395
685
460
Lifting capacity, 4 m, kg
845
915
875
1205
1145
Slewing angle, degrees
390
400
400
400
400
Weight of grapple and rotator
105
105
105
190
190
Grapple area, m2
0,21
0,21
0,21
0,24
0,24
Rotator, standard / (optional)
FR10
FR10 / (FR15)
FR10
FR15B / (FR21B)
FR15B / (FR21B)
Recommended pump capacity, l/min
25-50
30-60
30-60
60-100
60-100
Working pressure, bar
195
195
195
195
195
Weight of the platform fitting, kg
650
650
650
650
650
Weight of the support legs, kg
220
267
267
267
267
Technical information for chippers Output,
260HF-EL / HFC
380HF / HFC
10-40
30-70
m3/h
Infeed dimensions, mm
260 x 320
380 x 420
Chip length, mm
7-25
10-30
Amount of knives
2 (3)
4
(540) / 1000
540 / (1000)
860 / 1230
1970 / 2300
Operation rpm Weight, kg Manufacturer reserves right to make changes in specifications.
Importer
CHHKTREN 09/11 ER / PRINTED IN FINLAND
Farmi Forest Corporation • Ahmolantie 6, FIN-74510 IISALMI, FINLAND • Tel. +358 (0)17 83 241 • www.farmiforest.fi