December 2013 Farming Monthly by Farming Monthly Ltd

Farming

MONTHLY National

December 2013

Inside this issue...

On Topic Getting into farming with McDonaldâ&#x20AC;&#x2122;s Young Farmer Training Programme

Farm Renewables Renewables round-up

Muck & Slurry The sweet smell of success

Contact a local operator:

Cambridge: Swansea: Penrith:

01223 835222 01792 310031 01768 210055

Contents

December 2013

12 29

Features

Regulars

14 38 40 42 43 46 48 54

06 12 50 56 58 60

LAMMA 2014 Show preview

Potatoes Industry news

Muck & Slurry Sector news

Animal Health Latest

Sheep Sector news

Arable Spring cropping & news

Grain

News All the latest need to know commentary

On Topic McDonaldâ&#x20AC;&#x2122;s Young Farmer Training Programme

Renewables Renewables news

Machinery New machinery news

ATV The essential workhorse round-up

Motors Whatâ&#x20AC;&#x2122;s new on the road?

NEXT MONTH

Sector news

LAMMA preview

Pests Pest problems? We welcome feedback and encourage readers to air their views. Have an opinion on a story or something you want to get off your chest? Write to us at the address below or email letters@farmingmonthly.com Whilst every attempt is made to ensure accuracy, the opinions expressed in the magazine are not necessarily those of the Editor. The Editor also reserves the right to alter or edit material as necessary and no responsibility is accepted for inaccuracies. Full copyright applies. All rights reserved 2013.

Andrew Poulton EDITOR

Connect with us: Published in the UK by Farming Monthly Ltd, 15-17 Dugdale Street, Nuneaton, Warwickshire CV11 5QJ Tel: +44 (0) 2476 353537 Fax: +44 (0) 2476 353571 Editor Andrew Poulton Editorial Assistant editorial@farmingmonthly.com Advertising Director Shona Beedham s.beedham@farmingmonthly.com Senior Advertising Sales Jenny Tranter j.tranter@farmingmonthly.com Advertising Sales Jessica Hopper j.hopper@farmingmonthly.com Advertising Sales Oliver Shorrock o.shorrock@farmingmonthly.com Accounts Manager Cheryl Arnold c.arnold@farmingmonthly.com Production studio@farmingmonthly.com Subscriptions subscriptions@farmingmonthly.com For editorial and general enquiries or to advertise please call Tel: +44 (0) 2476 353537 or email sales@farmingmonthly.com

Competition Subscribe

www.farmingmonthly.co.uk Keeping youHeat up-to-date Win with his &allhers Holders the latest farming

Five setsand to give away... news. agriculture

Read the Farming Monthly Digital Edition on your desktop, iPad, iPhone or Android device.

Great reasons to subscribe... Just £18 for • Free delivery direct to your door • Never miss an issue

As far as is known, and has ever been tested, Heat Holders are the warmest thermal socks in the world. Seven times warmer than normal cotton socks and designed to keep toes toasty warm in any weather. They are available in a range of sizes for men, women and children RRP of £7.99 (£5.99 for children’s socks). In various high street retailers as well as through www.heatholders.com Follow HeatHolders on Twitter: @HeatHolderSocks Follow HeatHolders on www.facebook.com/heatholders

12 issues

Keep up-to-date with the latest news in the farming industry by subscribing to Farming Monthly National - the UK’s leading directly distributed, national agricultural publication. Paying by cheque: Please complete your name and address details below and make your cheque payable to Farming Monthly Ltd. Paying by debit or credit card: Please return the completed form below to: Farming Monthly Subscriptions, 15-17 Dugdale Street, Nuneaton, Warwickshire CV11 5QJ or call us on 02476 353537

Q: What TOG rating do HeatHolders boast? A: 1 TOG B: 1.5 TOG C: 2.3 TOG

Yes please I’d like to subscribe

Send your completed answer form to: Competitions, Farming Monthly National, 15-17 Dugdale Street, Nuneaton, Warwickshire CV11 5QJ Good Luck!

Name: ................................................................................................... Address: ............................................................................................... .....................................................................Postcode: ........................ Telephone: ............................................................................................

Answer: ............................................................................ Name: ................................................................................................... Address: ............................................................................................... .....................................................................Postcode: ........................ Telephone: ............................................................................................ Email: ................................................................................................... Farm Type: ............................................................ Acreage: ................................................................

Email: ................................................................................................... Farm Type: ..................................... Acreage:....................................... Visa/Delta Card No. CVV No.

Signature

MasterCard

(Valid From)

Switch

Issue No. _______

Expiry Date

Date

By including your email address, you indicate your consent for us to email you information about selected products, events and services from Farming Monthly Ltd, our affiliated companies and from carefully chosen third parties. To opt out tick here. I do not wish you receive emails from: Farming Monthly Ltd Affiliate Companies Third parties

| News

Water policy must be workable for farmers The NFU has called on Government to ensure that future policies recognise the critical link between water and food security, and that they help deliver enough water for farmers to grow food. n the day that the Government’s Water Bill reached the Committee Stage in Parliament (December 3), NFU Deputy President Meurig Raymond made the call at a meeting of abstractor group delegates and irrigators in Newmarket. The Bill is just one element of the Government’s wider programme to address water pressures, and contains provision for farmers dependent on a mains supply of water, but does not offer any help to farmers who rely on abstracting their own water from rivers and boreholes. “Many farms, together with manufacturing and processing businesses who rely on farms to produce our food, are dependent on a secure supply of affordable, wholesome mains water,” Mr Raymond said. “Those businesses will undoubtedly be interested in benefits that may result from

changes in retail competition proposed by the Bill. “However fruit and vegetable farmers tend to abstract water from rivers and boreholes rather than rely on mains water. Over the past 20 years, many have improved their long-term resilience to water scarcity by constructing on-farm reservoir storage facilities. We need to build more reservoirs on farms and we need sensible planning rules, a simple, flexible licensing system and tax incentives to encourage farmers to take on these construction projects. “The crucial issue for the NFU is that this Bill must be underpinned by Government policies that recognise and promote the link between water and food security. Above all, we look to government to deliver a fair share of water to farmers to grow our food and ensure sufficient money is spent to maintain conveyance in our rivers and reduce the risk of flooding.”

£10 Million trade deal reached on UK beef A new trade agreement has opened the door to UK exports of beef to Singapore worth an estimated £10 million a year to the UK economy. ingapore’s ban on UK beef, put in place following the identification of BSE, has been lifted following an inspection from the country’s Agri-food Veterinary Authority (AVA) to three beef plants in the UK. These beef producers and their sister plants will now be able to export cuts of deboned beef from cattle aged thirty months to Singapore. Other beef producers will be able to trade on the same terms, once the Food Standards

Agency has confirmed they have met the necessary requirements set out in the trade agreement. A Defra spokesperson said: “This deal is fantastic news for the UK beef industry, allowing them to grow their businesses by exporting to a lucrative market. We are working open markets across the globe to UKmade food and drink. The food and drink industry is the biggest manufacturing sector we have, and increasing exports will be a major boost to our economic recovery.”

Operates with Zero Ambient Light 400+ metre Range 20x Optical Zoom Ideal for :Security Pest Control Animal Search

Supplier of NiteSite Spotter MLS

MANS LOCATION SERVICES LTD +44 (0) 1249 816 181 sales@mansls.co.uk www.mansls.com

06 | Farming Monthly | December 2013

www.farmingmonthly.co.uk

| News

FUW members’ CAP consultation response reveals anger over modelling delays Failure by successive Welsh Governments to instigate modelling work early enough has made it impossible to respond definitively to the Welsh Government’s consultation on the post 2014 CAP Payment regime, according to a majority of Farmers’ Union of Wales committees. welve of the union’s county executive committees and eight central policy committees had considered the consultation paper, issued last July, ahead of the consultation deadline on Saturday (November 30). The consultation dealt with an array of complex issues relating to the future CAP payment regime in Wales, with the single most important issue being which flatrate payment model Wales should move towards after 2014. Proposals had included a twotier model with differing payment rates per hectare for moorland and the rest of Wales and a three-tier model with differing payment rates per hectare for moorland, Severely Disadvantaged, and "other" land. “However, modelling of the likely impacts of different payment ratios and changes to the moorland map has continued throughout the consultation period, meaning the majority of our committees felt it was impossible to provide a

www.farmingmonthly.co.uk

definitive answer to the key questions posed in the consultation paper as the goalposts were continually being moved,” said FUW president Emyr Jones. Mr Jones said that the conclusion was hardly surprising as people were unlikely to support a particular model when the geographic boundaries and payment rates for that model were unknown. “While members praised the modelling work undertaken since June 2012, and the Welsh Government staff who have undertaken that work, there is an overwhelming feeling that the industry has been let down by successive Welsh Governments’ reluctance to instigate detailed modelling until the 11th hour. “If we had been required to implement CAP reform in 2014, as originally intended, we would be in an even greater mess,” added Mr Jones. In July 2009 the FUW warned

that "…the movement to flat-rate payments is inevitable, and we need to start looking at all the options in order to find the best solution for the Welsh industry". Those sentiments were reiterated in July 2011 when the FUW told the then newly-appointed deputy minister Alun Davies that there was a "desperate need for the Welsh Government to drive ahead with modelling work so we know where we currently stand, and where we want to be under the new CAP, given the inevitable move away from the historic single payment model...the delay in undertaking such work is regrettable". “Four-and-a-half years after our initial warnings, we are sadly now in an ‘I told you so position’, which we definitely do not want to be in, that has caused extreme anger among members and has made it impossible for members to respond to a key question in the consultation document,” said Mr Jones. In terms of the transition period over which farm payments should move from an historic to a flat-rate based system, Mr Jones said the union maintained its belief that a transition period of more than five years was needed - particularly if the failure to start modelling work soon enough was going to increase disruption for members. “Whenever we have consulted on the transition period, the vast majority of members have favoured seven to 10 years. The Welsh Government originally supported that view but has since opted for five years. “Wales has the option to implement an ‘internal convergence’ model whereby

entitlement values move towards, but do not reach common values by 2019, and it is this option which is most in line with the views expressed by the majority of members on successive occasions. “Such a system would provide those businesses which will be hit most severely by the move to a flat rate system with more time to make essential changes to their businesses in the face of falling CAP receipts.” Members also expressed their opposition to the transfer of funds from Pillar 1 to Pillar 2, and the belief that any transfers should be match funded. “The Welsh Government wishes to minimise disruption for Wales’ agriculture industry and, given that the Pillar 1 budget will be 1.6% lower in nominal terms after 2014 and even lower in real terms, modulation at any significant rate would add to the disruption felt by the industry and Welsh businesses,” said Mr Jones. “Wales currently has a modulation rate of 11.5% and keeping Pillar 1 payments at the same level in nominal terms would mean a reduction in modulation of around 1.5% - while keeping the receipts the same in real terms would mean a far greater reduction. “With a consultation on the future Pillar 2 Rural Development Plan not due out until next year, and the majority of Pillar 2 payments going towards replacing income foregone as a result of agrienvironment measures, it would be wholly unacceptable for the maximum modulation rate of 15% to be applied without any guarantee that such a reduction will ultimately result in an increase in farm incomes for the vast majority.”

December 2013 | Farming Monthly | 07

| News

Quantum 65c Two Wheel Drive, 2010, 3771 hours, 16x16 mechanical gearbox, front weights,12.4 x 32 tyres, 2 x hydraulic valves. Farmall 55A Two Wheel Drive, Roll bar, 14.9 x 28 tyres, front weights, 1 x hydraulic valve, trailer brake valve, very low hours, just like new, CaseIH Warranty. Farmall 75c 4wd ‘ 63 ‘ registration, just 50 hours, 12x12 gearbox, drawbar, 1 x hydraulic valve, 380/85 x 30 tyres, just like new, CaseIH Warranty. JXU 75 4wd. 24x24 PowerShift & PowerShuttle 40kph. 2012, 589 hours, 16.9 x 34 tyres, front weights & mudguards, 2 x hydraulic valves. NEW - JXU 105 4wd. 24x24 PowerShift & PowerShuttle ‘ 63 ‘ reg. air conditioned cab, 2 x assistor rams, front weights & mudguards, 480/70 x 34 tyres. CaseIH Warranty. JXU 105 4wd. 24x24 PowerShift & PowerShuttle ‘ 61 ‘ reg. 705 hours, 3 speed pto. air conditioned cab, front weights & mudguards, 480/70 x 34 Michelin tyres, Electronic draft controls. Maxxum 110 EP 4wd. 40kph Semi PowerShift transmission, Cab suspension, 520/70 x 38 tyres, 3 speed pto. 113 litre/min hyd. pump, very low hours ‘ 63 ‘ registered. CaseIH Warranty. Maxxum 110 EP c/w Chillton U10 Loader 40kph Semi PowerShift transmission, Cab suspension, 3 x hydraulic valves, 3 speed pto. 113 litre/min hyd. pump ‘ 63 ‘ registered. CaseIH Warranty. Maxxum 125 EP c/w Quicke Q65 loader, 2012, 887 hours, 40kph PowerShift transmission with Creep gears, 18.4 x 38 Michelin tyres, air conditioned cab with air seat. Maxxum 125 c/w Quicke 10.80 loader, 2011, 1562 hours, 50kph PowerShift transmission,600/65 x 38 tyres, air conditioned cab with air seat, trailer air brakes. Maxxum 125 Suspension c/w Case LRZ130 loader, 2009, 2921 hours, 40kph PowerShift transmission, 520/70 x 38 tyres, air conditioned cab with air seat. Maxxum 140 EP Suspension 40kph. 2012, 338 hours, 460/85 x 38 tyres, 3 speed pto. front weights, air conditioned cab with suspension. CVX 140 Suspension 50kph. 2008, 3447 hours, 460/85 x 38 tyres 80% good, front weights & mudguards, trailer air brakes, 4 speed pto. CVX 150 Suspension 50kph. Front Linkage, 2009, 3000 hours, 650/65 x 38 tyres, 4 speed pto. 4 x hydraulic valves. CVX 150 Suspension 50kph. Front weights, 2007, 4143 hours, 20.8 x 42 tyres, 4 speed pto. 4 x hydraulic valves. CVX 1155 Suspension 50kph. front weights, 2004, 3338 hours, 156hp. 460/85 x 38 tyres, 4 x hydraulic valves. CVX 160 Cab & Axle Suspension 50kph. Front Linkage & hyd. service, Trailer air brakes, 4 speed pto. 650/65 x 38 tyres, 2009, 5210 hours. CVX 160 Cab & Axle Suspension 50kph. Front Linkage, Exhaust brake, Trailer air brakes, 2009, 3568 hours, 650/65 x 38 tyres, one owner. CVX 175 Cab & Axle Suspension 50kph. 2009, 2578 hours,

front weights, 580/70 x 42 tyres, trailer air brakes. CVX 195 Cab & Axle suspension 50kph. 2009, 4297 hours, trailer air brakes, front weights, 650/65 x 42 tyres, 4 speed pto. Puma 125 c/w LRZ150 loader, 2011, 2423 hours, 18.4 x 38 Michelin tyres, cab & axle suspension 40kph. air conditioned cab with air seat & passenger seat. Puma 140 MultiController, 2010, 553 hours, cab & axle suspension 40kph. 3 speed pto. Pro 300 screen, passenger seat, front weights, 600/65 x 38 tyres 90% good. Puma 140 front axle & cab suspension 40kph. 2011, 570 hours, 650/65 x 38 tyres, 3 speed pto. air conditioned cab with passenger seat. Puma 140 Powershift 40kph. 2010, 700 hours, Cab & axle suspension, trailer air brakes, 3 speed pto. 520/85 x 38 tyres 70% good, front weights, air conditioned cab with passenger seat. Puma 155 MultiController 50kph + Creep gears, 2008, 5000 hours, 3 speed pto. Front Linkage, 650/65 x 38 tyres 60% good. Puma 155 PowerShift 40kph. 2009, 2611 hours, front weights & mudguards, 650/65 x 38 tyres, 3 x double acting hydraulic valves. Puma 145 EP PowerShift 40kph. Cab & axle suspension, 2012, 660 hours, trailer air brakes, front weights & mudguards, 460/85 x 38 Goodyear 80% good, 4 x double acting hydraulic valves. Puma 145 EP, Suspension 40kph. 2012, 797 hours, 600/65 x 38 tyres, trailer air brakes, front weights, exhaust brake, 3 speed pto. Puma 160 EP Cab & Axle Suspension 40kph. 2013, 352 hours, 20.8 x 38 tyres, front weight, 3 x mechanical hydraulic valves, Puma 160 EP Cab & axle suspension 50kph. 2012, 560 hours, trailer air brakes, exhaust brake, 3 speed pto. 600/65 x 38 tyres 80% good, front weights & mudguards. Puma 160 EP Suspension 40kph, 2012, 1300 hours, Front Linkage, 3 speed pto. 600/65 x 38 tyres, 3 speed pto. 3 x hydraulic valves. Puma 170 EP PowerShift 40kph. Suspension, 2012, 1517 hours, 650/65 x 42 Goodyear tyres, 80% good, Climate control, 4 x mechanical valves, front mudguards & weights. Puma 165 c/w Quicke Q65 Self level loader with Softride, 2010, 2100 hours, 50kph. trailer air brakes, trailer air brakes, 650/65 x 42 tyres. Puma 180 PowerShift 50kph. 2012, 560 hours, trailer air brakes, air conditioned cab, 650/65 x 42 tyres, Front weights & mudguards, 4 x electric hydraulic valves. Puma 180 PowerShift 50kph. MultiController, 2012, 1717 hours, air conditioned cab, 650/65 x 42 tyres, Front weights & mudguards, 4 x electric hydraulic valves. Puma 195 MultiController 50kph. 2008, 976 hours, trailer air brakes, AFS Pro 200 screen, weights, 710/60 x 42 Michelin 80% good. Puma 210 Suspension 50kph. 2012, 630 hours, trailer air brakes, 4 x electric hydraulic valves, weights, 650/65 x 42 tyres 70% good.

08 | Farming Monthly | December 2013

Puma 210 Front Linkage, Powershift, 2010, 4183 hours, 620/70 x 42 tyres 90% good, Radar, 50kph. 4 x electric hydraulic valves. PUMA CVX 160, 2011, 1975 hours, 50kph. trailer air brakes, front weights, 3 speed pto. exhaust brake, front weights, 580/70 x 42 tyres. PUMA CVX 160, 2012, 275 hours, 50kph. trailer air brakes, front weights, 3 speed pto. exhaust brake, front weights, 650/65 x 42 tyres. Puma CVX 180 Front Linkage, ‘ 60 ‘ reg. 2524 hours, Suspension 50kph. exhaust brake, AFS Pro 300 Screen, 580/70 x 42 tyres 70% good, Full suspension 50kph. Puma CVX 195 Suspension 50kph ‘ 60 ‘ reg. 4774 hours, Accuguide ready, trailer air brakes, weights, 620/70 x 42 Michelin tyres, passenger seat, exhaust brake. Puma CVX 210 c/w Front Linkage, 2011, 2780 hours, 50kph. AFS 300 screen, exhaust brake, Climate control, 650/65 x 42 Michelin tyres, 4 x hydraulic valves. Puma CVX 225 Front Linkage, 2010, 785 hours, 50kph. trailer air brakes, 650/65 x 42 tyres 80% good, 4 x hydraulic valves. Magnum 230, 2003, 5120 hours, 650/65 x 38 tyres, 4 x hydraulic valves, front weights. Magnum 225 Suspension 50kph. 2007, 2361 hours, 800/70 x 38 tyres, front weights, 4 x hydraulic valves. Magnum 225 Suspension, 2011, 3120 hours, 710/70 x 42 Michelin tyres, trailer air brakes, front weights & mudguards, 4 x hydraulic valves. Magnum 260 Suspension 50kph. Full Accuguide, 2011, 1795 hours, trailer air brakes, 650/65 x 38 tyres, front weights & mudguards. Magnum 310 Suspension 50kph, Full Accuguide steering, 2011, 2255 hours, trailer air brakes, 710/70 x 42 tyres, front weights, 5 x hydraulic valves. Magnum 310 Suspension 50kph. 2010, 2632 hours, 800/70 x 38 tyres, trailer air brakes, 4 x hydraulic valves. Magnum 310 Suspension 40kph + Creep gears, 540 & 1000 pto. 2010, 1479 hours, 650/65 x 38 tyres, 4 x hydraulic valves, front weights. New - Magnum 340 Suspension, 2013, very low hours, ex Show tractor, front weights, Red & Silver Livery. CaseIH Finance & Warranty. Magnum 340 Suspension 50kph. 2011, 588 hours, Accuguide ready, trailer air brakes, 800/70 x 38 tyres, Climate control, front weights & mudguards. E & O.E Special Low Rate Finance with CNH FINANCE Terms and conditions apply. Business purposes only. Documentation Fee and VAT are payable upon signing. Finance Offer valid on units invoiced between 15 November and 31st December 2013. This is not a contractual offer and is subject to return conditions. Changes in prices, supply terms, law or interest rates and may be withdrawn at the discretion of CNH Capital. Finance is subject to status ( credit approval )

www.farmingmonthly.co.uk

| News

SUD set to affect every UK farm holding Implementing the Sustainable Use Directive (SUD) in the UK will bring about changes that potentially affect every holding across the UK, warns The Voluntary Initiative (VI). armers who have adopted the best practices, promoted by the VI and other schemes over the past decade, will not find the challenges too arduous. However, the complex nature of the Directive means that every farm should check that it is able to comply. “We have some 200,000 farm holdings across the UK and potentially the requirements of SUD could affect every single holding,” warns Richard Butler, VI Chairman. “This will affect anyone who treats thousands of arable acres on a regular basis through to the small holding and pony paddock where the knapsack is used occasionally for thistle and nettle control. “The whole industry has to wake up to this fact. Farming unions, levy bodies, assurance schemes, suppliers, contractors and agronomists all have a role to play in making sure farmers are

aware of the new requirements and helping them to comply. “The VI is indebted to HGCA for stepping up to the challenge and mailing some 30,000 growers with our checklist of actions for farmers. “Failure to take note of SUD could lead to either prosecution for non-compliance and may in the future threaten eligibility for Single Farm Payments.” There are three key issues in the next three years: During 2014, farmers and land managers need to develop ways to demonstrate that Integrated Pest Management (IPM) is being practised. This can be achieved by devising an IPM plan and guidance will be available on the VI website. This will affect every farm where professional crop protection products are applied. By 26 November 2015, anyone applying professional crop protection products must hold a

Recognised Certificate, such as the PA1 and 2A or 6A. Those currently operating under ‘Grandfather Rights’ have two alternatives: o To apply pesticides on their own land/property or that of their employer anyone born before 31 December 1964 can take the City & Guilds NPTC Level 2 Award in the Safe Use of Pesticides Replacing Grandfather Rights. o To apply professional products as a contractor or to land not owned by them or their employer, any one must take the existing Level 2 Safe Use of Pesticides qualification appropriate to the type of equipment used. After 26 November, professional products should not be purchased unless the operator holds an appropriate certificate. The alternative is to delegate the task to a spray contractor with appropriate training and equipment.

By 26 November 2016, all working application equipment must have been tested by the National Sprayer Testing Scheme (NSTS). For most application equipment the test needs to be repeated every five years, for some smaller machines there is a six year interval. Knapsack sprayers need to be regularly checked by the person responsible as a minimum. To help farmers and growers get to grips with the changes, the VI has published an ’Are You Ready for SUD?’ card which can be downloaded from the website www.voluntaryinitiative.org.uk. The card will also be available from crop protection distributors, farming unions and will be provided as part of the materials for this year’s NRoSO Operator Roadshow.

Tractor Drivers: farming’s most visible ambassadors The CLA in the Midlands is reminding the industry that tractor drivers’ behaviour on public roads can significantly affect the public’s perception of farming. It also says that this is an opportunity to generate goodwill with the public. LA Midlands regional director Caroline Bedell believes that just being legal is not enough. Consideration for other road users can have a tremendous effect on farmers’ relationships with their local community as well as the general public. Mrs Bedell said: “As soon as a tractor leaves the field and sets out on a public road, it is a different world. As well as being subject to the complex laws of the highway, a tractor becomes the public face of farming.” “The rush to complete work in dwindling daylight is understandable, but we should not cut corners at the expense of safety, nor common courtesy. The time saved is insignificant compared with the damage to the perception of our industry, or the increasing likelihood of breaking the law, facing fines, litigation or having to live with the consequences of causing a serious accident. The Association says that the most common complaints from the public are: Mud on roads: A number of serious accidents have recently been attributed to mud. It is your responsibility to do everything possible to prevent mud being deposited on the road, including cleaning mud from vehicles, as far as practicable, before they are taken onto the highway. Pulling over: If you don’t pull over when you have a long queue of traffic behind you could lead to an offence of inconsiderate driving, punishable by up to 9 points on your licence and a fine of up to £5,000. Pulling over when possible will not delay you significantly, and is much appreciated by the drivers behind, turning frustration into appreciation.

www.farmingmonthly.co.uk

Hedge trimming: Section 148 of the Highways Act 1980 says you must ensure the highway, including the footway and drainage features, is left clear of debris from cutting operations. Doing so will also limit any liability for consequent damage, such as punctures or damage to other vehicles. Overloading: While the current weight limits for tractors and trailers on the road is under review it must be remembered that it is not simply about complying with the law – unsafe loads are unsafe even if they fall within the weight limit. Use common sense, and

remembers that wide loads can cause damage as much as tall loads with a high centre of gravity. Lights: In anything other than good visibility in daylight you need lights on the road. That’s not just the law, it can save lives. Mrs Bedell added: “This is not negative, it is an opportunity for farmers to reinforce the goodwill that exists for the industry. All I am asking is that every time you take a farm vehicle onto a public road, remember that you are an ambassador for farming. You can make the most of that opportunity.”

December 2013 | Farming Monthly | 09

| Forestry

Launching - Woodlands for Climate Change Award A new Woodlands for Climate Change Award has been launched as part of the 2014 RFS Excellence in Forestry Awards in association with Forestry Commission England and England’s Climate Ready Support Service led by the Environment Agency. he award has been introduced alongside existing RFS Excellence in Forestry categories to raise awareness of, and promote the importance of, managing woods for resilience to increased threats to woodlands from pests, disease and climate change. It will reward planting that uses more diverse native and novel tree species to ensure Britain continues to produce quality timber. The Woodlands for Climate Change Award, is free to enter and open to all woodlands throughout England where tree plantings over the past five years, both new and restocking, are creating sites that should be resilient to the predicted challenges of climate change and pests and diseases. There are prizes of £1,000 and £500 and entries must be received by 31 March 2014. Go to www.rfs.org.uk/involved/woodlands-forclimate-change-2014 or contact Trefor Thompson at rfscompetition@boyns.net or call him on 01824 704230 for details. RFS Development Director Simon Lloyd says: "The RFS is delighted to partner with the Forestry Commission and England’s Climate Ready Support Service to run the Excellence in Forestry Woodlands for Climate Change award. Currently 80% of our timber is produced from just 10 species of broadleaf and conifer, and several of

these, such as larch, Corsican pine and ash are severely threatened by disease. Many woodland owners are considering what species to plant and which silvicultural regime to adopt to better protect their woods against the risk of climate change. Encouraging owners who have been through this process in the last five years and are willing to share their experience will help all woodland owners make better informed decisions." John Weir, FC England Adviser, Woodland Creation and Resilience, says: "A key strategy to adapting to a changing climate and the increases in pests and diseases is to diversify the tree species used in forestry. Foresters should also be obtaining quality seed from locations more suited to our future climate. These are two criteria among many found within the climate change guidelines supporting the United Kingdom Forestry Standard." Liz Parkes, Head of Climate Change, Climate Ready Support Service, says “Changes in climate such as higher temperatures and changes in rainfall patterns could have profound impacts on the productivity, economic viability, and future opportunities for forestry. We very much welcome positive action by the forestry sector to consider and address some of these issues through greater species diversity and general woodland management.” The Award envisages the primary

10 | Farming Monthly | December 2013

purpose of the plantings will be for the production of sustainable timber. Plantings must demonstrate anticipatory adaptation through selection of tree species suitable for the present but also anticipating the future climate. Woodlands planted during the past five years are eligible and must be no less than 5 hectares in size (although this could include several smaller compartments or mixed restocking and new planting). Also being held in 2014 is a Best of

England Championships with winners of RFS Excellence in Forestry Awards over the last five years invited to compete across five categories - Duke of Cornwall (Multipurpose ) RFS Silviculture Award, Small Woodlands (including Farm), Community Woodlands and Schools Awards. Winners of the Woodlands for Climate Change Award and the Best of England categories will receive their awards at a special event at Upton Estate on 9 July 2014.

10% off until end of December

www.farmingmonthly.co.uk

| Anniversary

Wha teve

r yo u fa

ce,

STI HL

he edge. st

www.farmingmonthly.co.uk

December 2013 | Farming Monthly | 11

| On Topic

On Topic

McDonald’s encourages more students to consider a future in farming as applications open for its young farmer training programme McDonald’s UK today called for more young people to consider a career in farming as applications open for the 2014/15 intake of its Progressive Young Farmer training programme.

“

There are very many opportunities for young people in farming and itís great to see that companies like McDonaldís are helping new entrants get into this exciting and rewarding occupation. The agri-food industry contributes nearly £100bn to the economy, employing 3.3m, a figure I want to see grow even further. For that to happen we need even more new entrants and new ideas coming into the industry, which is why weíre putting £410m a year into driving research and innovation in the food and drink sector. George Eustice, farming minister

”

Getting into farming with McDonald’s

12 | Farming Monthly | December 2013

www.farmingmonthly.co.uk

| On Topic

On Topic

or the first time, students at colleges and universities throughout the UK, not just those studying agriculture, are being invited to apply to the 12-month paid training scheme. According to new research undertaken by Lantra, the UK’s sector skills council for land-based and environmental industries, only 12% of people working in the UK farming industry today are aged between 16 and 24. The research highlights that more than 595,000 people will be required to join the sector over the next 10 years to safeguard the future of the industry. The Progressive Young Farmer training programme, now in its third year, is designed to help young farmers kick-start their careers in the sector. It offers three students first-hand experience of practical farming and business management as well as a unique opportunity to trace the entire supply chain of McDonald’s ingredients from farms and abattoirs to the restaurant front counter. In the final stage of the training programme, students spend a week working in a McDonald’s restaurant where they have the opportunity to interact with customers and prepare food using ingredients that they have seen grown, reared and harvested. Over 12 months, the scheme provides a blend of farming and business experience – from land management and animal husbandry through to marketing and IT – which is needed to succeed in the modern farming sector. McDonald’s call for applicants follows the launch of a new skills strategy designed to help young farmers, created by the Agriculture and Horticulture Development Board (AHDB) and championed by the cross-industry AgriSkills Forum. The strategy aims to promote the importance of different skills within the sector and to attract more young farmers with the kind of business and technical skills that are key to the future of UK agriculture. Warren Anderson, Vice President, Supply Chain, McDonald’s UK, said: “As one of the biggest customers of British and Irish farming, serving quality British ingredients to over three million customers every day, we have a responsibility to help more young people break into the sector. Harnessing new talent and skills is crucial

for developing the sustainable practises that will help secure the future of farming in the UK. “There’s much more to a career in farming than many people think. In addition to skills such as animal husbandry, farmers need business acumen and an awareness of the latest technical innovations. Our Progressive Young Farmers are given a unique opportunity to benefit from the experience of expert mentors and gain an understanding of our entire supply chain, right through to restaurants, where they can fully appreciate the role farmers play in producing the food we serve to our customers.” Paul Westaway, AHDB Skills Champion and beef farmer, commented: “The farming sector is crying out for skills that people might not traditionally associate with our industry. We need to ensure students of all backgrounds see farming as a modern, progressive career option – one that gives them the chance to run their own business and help drive technological innovation. Giving aspiring farmers the opportunity to develop and demonstrate these skills will not only benefit them but the industry as a whole. Niall Morrow, one of McDonald’s Progressive Young Farmers, added: “Farmers do not normally get to see what happens to produce beyond the farm, so the opportunity to follow an entire supply chain, particularly one of this scale, really stood out for me. Gaining experience in different parts of the industry and learning why what we do on farm is so important further down the line will make all the difference when I start looking to set up my own business.”

For more information about McDonald’s Progressive Young Farmer training programme visit whatmakesmcdonalds.co.uk or email farmforward@uk.mcd.com. Leoni Applications for the Collingwo 2014/15 od intake need to be submitted via mcdonalds.co.uk/youngfarmers by 17 January 2014.

www.farmingmonthly.co.uk

About The Progressive Young Farmer Training Programme

The Progressive Young Farmer training programme is part of Farm Forward, McDonald’s long-term commitment to help secure a sustainable future for British and Irish Farming. Farm Forward aims to address some of the challenges facing the sector, such as an ageing workforce, and is built around five core commitments: championing quality produce; improving animal welfare standards in the supply chain; helping young people get into careers in farming; helping make environmentallyfriendly improvements to farms; and sharing knowledge within the industry.

December 2013 | Farming Monthly | 13

| LAMMA

New venue for LAMMA as show continues to grow The ever-increasing popularity of the LAMMA Show amongst the farming community nationwide, has in the past few years led to such a tremendous increase in both visitor and exhibitor numbers that the show has outgrown its previous venue at Newark. or LAMMA 2014 over 850 exhibitors have already booked stand space for the event which will take place on 22nd & 23rd January 2014, at the Show’s new home at the East of England Showground in Peterborough, adjacent to the A1 trunk road and close to the Lincolnshire/Cambridgeshire border.

“High on the list of favourite exhibition events for professionals in the agricultural and associated industries” From the outset the primary aim of the LAMMA Show was to offer a low-cost shop window for small manufacturers to display their products. More than 30 years later, this is still the case and the success of this policy is evident from the large number of small companies, from all parts of the country, taking part. Combine this with the presence of all the major players in the farm machinery, equipment and services sectors, and it becomes evident why so many farming decision-makers, from all parts of the UK and from further afield, view the LAMMA Show as an important date for their diaries. For LAMMA 2014, the principal Show sponsor will be Agribank PLC., a leading provider of finance for the farming industry. The Show will once again offer plenty to interest

14 | Farming Monthly | December 2013

visitors, since a large number of companies, both from the UK and mainland Europe, will be announcing new products and many of the major multi-nationals will be showing, for the first time in the UK, their new equipment which they launched at the major Agritechnica Show in Germany in November. Its growing reputation and popularity has meant that, over recent years, the character of the Show has evolved from being predominantly focused on arable machinery, parts and workshop equipment, to one which now includes a wide range of horticultural, amenity and livestock equipment, as well as ‘green energy’ products, seed suppliers, agrochemical, farm management and financial advisory services. In addition, a number of companies specialising in re-cycling and construction equipment will be an attraction to renewable energy, re-cycling and construction professionals, as well as farmers seeking ideas for diversification projects. This growing diversity of exhibits attracts visitors from all regions of the UK and a number of trade representatives from across Europe and as far afield as India, China and Australia are expected to visit the Show. With traffic management playing a very important role in speeding up access to the Show for visitors and minimising delays to local and through traffic not attending the Show, extensive consultations with the Highways

Agency, Police, District and County Councils and the Showground owners have resulted in the development of a comprehensive traffic management plan and visitors are requested to follow the local Event signage in order to minimise delays. The ever increasing popularity of the LAMMA Show indicates that it is now placed high on the list of favourite exhibition events for professionals in the agricultural and associated industries. We look forward to welcoming our regular visitors and, of course, we extend an especially cordial invitation to those who have yet to enjoy the LAMMA experience. As an added incentive to ‘early-birds’ arriving at the Show, the car parks will open at 6.00am and visitors arriving between 6.30 and 8.00am will be able to enjoy a full English breakfast at a discounted price. Additionally, the Show will officially open at 7.30am on both days. As in previous years, both admission to the Show and car parking are free of charge.

www.farmingmonthly.co.uk

| LAMMA

TFM Easy Load TFM Easy Load is based on the successful TFM (Trioliet Feed Management) Tracker feed management programs. ith the TFM tracker programs farmers have the opportunity to make clear feed reports in order to improve their feed efficiency. Many users appreciate the numerous input features and clear data representation of the program. For those who want to upload their feeding data to the weighing system of the mixer feeder in a simple way, but who do not require the extensive functionality of feed management software, Trioliet now introduces TFM Easy Load. TFM Easy Load is a small software program with which dairymen can create their rations in a convenient and comfortable way at the PC in the office. Many food components can be stored. Also prices can be linked to the components, based on the actual weight or dry matter weight. In this way the program can calculate directly the actual feed costs of the different rations. After adding herd groups the rations can be linked to the concerning animal group. TFM Easy Load stores all the necessary feed information on a USB Stick so it can easily be transferred to the Triotronic weighing indicator on the mixer feeder. Prior to loading the mixer the operator can change the number of animals or total quantity of the ration in the indicator. The Triotronic indicator will in turn recalculate the ration by adjusting the amount of each individual

www.farmingmonthly.co.uk

ingredient. TFM Easy Load program will be available as a low-cost option • The possibilities of TFM Easy Load in an overview: • Simple and easy programming of the Triotronic programmable weighing indicator • Front programming on the weighing indicator no longer necessary

• Clear feed information reports • Simply forward feed information as a PDF file, e.g. to nutritionists • Clear view on actual feed costs • Changes in rations and cow groups are quick to make For more information contact Bart Koekkoek, Product Manager: b.koekkoek@trioliet.com or visit www.trioliet.com

December 2013 | Farming Monthly | 15

| LAMMA

Agricultural Supply Services at LAMMA The Rising Platemeter - F200 For Dairy, Beef & Sheep Farmers can be seen on stand: 122 Hall 1 he Platemeter measures Grass yield in DM/hectare, so the farmer can calculate much more accurately how long the animals should stay in the field. The Digital Platemeters include FREE Pasturecover software. • DAIRY FARMERS - extensive advice from DairyCo. • SHEEP FARMERS new advice in EBLEX article.to Cut Winter Feed cost by ‘All Grass Wintering of Sheep’ –Dr John Vipond - SAC It allows Dairy & Livestock farmers to make the much more effective use of their Grazing & to plan their Fertiliser applications. Researchers suggest a 10-15% improvement through pasture budgeting systems, with the Platemeter at the centre of this strategy. Charles Goldingham said 'We are very excited to have been appointed UK importers for FarmWorks System (from NZ) since they offer the most

prestigious Platemeter range. As well as the F200, we also hope to display the F300 & the Mechanical platemeter Upgrade Kit'

Vadertsad at LAMMA Vaderstad launch new stripdrill front tool for Spirit 600C. aderstad has launched a unique tillage and drill front tool for the Spirit range, which has been designed to minimise soil disturbance at drilling in order to conserve moisture, minimise the effects of compaction and ultimately increase cereal yields. The first Spirit StripDrill prototype was tested in 2011 on a Spirit 400C with its debut being at LAMMA 2013. It will now be attached to the 600C, which is making its debut at LAMMA 2014. Main features include 25mm hard metal coated narrow tines mounted at 16.7cm or 33.4cm and load sensing hydraulics. Narrow tines ensure they open up as smaller gap as possible and minimise energy consumption while maintaining drilling speeds of up to 15kmph. The tine can be set to loosen soil in the front of every second seed coulter or between two seed coulters. At the same time fertiliser can be placed at two different depths. In trials the StripDrill has been shown to contribute to higher yields by helping the plant to

quickly produce a deep root system after drilling. Vaderstad believes that over the long term, yield increases in oilseed rape of 5-10% are realistic. A welldeveloped root system helps establishment, especially in dry weather conditions. In wet years, there is a greater chance that the excess water will run off the field via more rapid infiltration. Load Sensing hydraulics allows the tractor to automatically regulate the amount of oil needed at a given moment. This is controlled by a thin hydraulic control line between the tractor and the machine. Advantages of load sensing technology include fewer hoses connected to the tractor, making hitching and unhitching the machine easier; lower energy consumption, as less oil is pumped round the system. The hydraulic system can therefore run at a lower temperature. Working sequences are also easy to handle – especially useful when the operator approaches the headland.

See us at LAMMA 2014

16 | Farming Monthly | December 2013

www.farmingmonthly.co.uk

| LAMMA

Do you need pathways, tracks, walls or foundations creating but don’t want to buy in tonnes of suitable material? Want to recycle the materials on your farm but just don’t know the best way to do it? aybe you have disused buildings or walls you can demolish? You may even have areas of rock outcrops on the farm that aren’t much use for other applications? Materials resulting from the demolition can be crushed into pieces at the desired size, and reused to fill in foundations or to build paths and roadbeds. Rocky outcrops can be dug up and then crushed to suitable material. With a Dig A Crusher MB crushing bucket from Worsley Plant you have the advantage of crushing your existing materials onsite, eliminating the need to load demolished material onto trucks or dumpers and take it to a waste dump, and also saving you money and time over buying in new materials. Not to mention being environmentally friendly too! The crushing bucket works with the hydraulic system of the excavators on which it is installed.

It can be used on the entire range of excavators or backhoe loaders, from 4 tons upwards. The flexibility of the crushing bucket is extraordinary, enabling small and large businesses alike, working in the farming sector, to recycle material obtained from crushing directly on site. A local farmer in Anglesey has saved over £5000 on materials that would have had to be purchased and bought onto site, by crushing rock which was previously unusable on the farm, and reusing it for barn foundations. He has also used some of the crushed rocks in drainage projects on his farm to create more usable farmland. Additionally, a customer in Scotland is utilising sources of rock outcrops by crushing down 30 tons of rock per hour, to use for building pathways and bridges. This is saving him considerable time, as well as

transportation and material costs, especially as some of the land where he works is hard to access in the Scottish highlands. Worsley Plant, is a leading plant sales and hire company that supplies the farming, construction, landscaping, demolition, waste management and recycling industries with premium specialist products for a variety of recycling applications. We will be at LAMMA in January showcasing our range of crushing and screening buckets plus demolition and sorting grabs – all ideal for use on farming projects. Come along and find out how we can help you recycle materials on your farm, saving you time, money and also the environment. At Worsley Plant we pride ourselves on putting you, the customer, first. Demonstrations can be arranged, allowing you to see an attachment or machine in action before you make a

decision. All our crushing buckets can be hired for a specific project or purchased. To find out more, or arrange a demo visit www.worsleyplant.co.uk, call us on 01606 83 55 44, or come and visit us at LAMMA.

BEST OF BRITISH BADGER FENCING TM

FENCING

Stronger - More Versatile - User Specifiable Ŕ Optional hinged upper or lower section to help prevent scaling or burrowing wildlife such as badgers Ŕ Safer knots and mesh sizes Ŕ Fences up to 2.6 metres high Ŕ Up to 500 metre rolls available Also UK manufacturers of: Hinge Joint Fencing, Barbed Wire, Chain Link Fencing, Line Wires and Staples. Suppliers of: Hexagonal Wire Netting.

Visit us at LAMMA 22-23 Jan. Stand B24 Email: sales@hamptonsteel.co.uk or Call +44 (0) 1933 234070 today www.hamptonsteel.co.uk

BRITISH WIRE FENCING YOU CAN TRUST

www.farmingmonthly.co.uk

December 2013 | Farming Monthly | 17

| Animal Health

18 | Farming Monthly | December 2013

www.farmingmonthly.co.uk

RDS presents WEIGHLOG α10 on-board weighing system at LAMMA 2014 | LAMMA

LAMMA 2014 will see RDS Technology exhibiting its extensive range of onboard weighing scales including the WEIGHLOG α10, which has been specifically designed for agricultural loaders. he WEIGHLOG α10 incorporates a 4.3” colour, hi brightness resistive touchscreen display and additional physical keys providing a user-friendly onboard weighing system that can be used for trailer & hopper loading, batch blending or check weighing. Suitable for use with up to 10 different attachments e.g. buckets or forks, the system can be retrofitted onto compact wheeled loaders, telescopic handlers, forklifts, skidsteer type loaders and tractor loaders. The system measures hydraulic pressure using up to 4 sensors at a certain position on the lifting cycle compensating for pressure changes in the system. Enhanced stores capability comprising 30 products, 30 customers and up to 5 different recipes designed around animal feed mixing, dispensing and grain handling enable accurate record keeping and traceability. The system provides communication and data storage via SD card reader and USB 2.0 host allowing quick, safe and efficient uploading and downloading of data. Also on show will be the Combine Moisture Meter 100.

www.farmingmonthly.co.uk

Using the same moisture sensor technology as the renowned RDS Ceres yield monitor, the Combine Moisture Meter 100 eliminates the need to make regular stops during harvesting to test grain moisture content and helps to quickly identify if conditions are, or are becoming, unsuitable for combining. Monitoring the moisture content of the crop helps to indicate its ripeness, enabling more timely harvesting decisions to be made in the field. Knowing the grain moisture content also allows it to be stored in the optimum location according to drying or cooling requirements. LAMMA 2014 will also see RDS Technology exhibiting its wide range of monitoring and measuring instruments for farming applications including the Artemis variable rate seed drill control system, the Ceres 8000i yield monitor system for combines, and the Delta 34i and Spraymaster 200 sprayer regulation and control systems. For more information on how RDS can help improve your farming operations – visit us on stand 650 in Hall 6, go to www.rdstec.com or call 01453 733300.

December 2013 | Farming Monthly | 19

| LAMMA

Kubota gearing up for LAMMA Tractor and groundcare specialists Kubota is busy preparing for what promises to be a packed 2014; celebrating its 35th anniversary in the UK market and introducing a new industry leading aftercare service.

isitors to Kubota’s stand (H71) at LAMMA 2014 will be able to see first hand Kubota’s extensive range of solutions for the agricultural market. The company will also be launching Kubota Care, an innovative five-year extended warranty package with a variety of other features.. Adrian Langmead, Kubota Tractor and Groundcare Business Development Manager, comments: “There are lots of reasons to get excited about 2014; it’s set to be a big year for Kubota. We’ve reached an important landmark in our history and it’s great to be able to share our success with the industry at LAMMA. The past 12-months have been a year of growth and development for us; improving on existing models whilst also bringing to market new and exciting additions.” “The launch of Kubota Care is part of our commitment to add

value to the service we provide to our customers. For those eager to find out more about the new extended warranty package, they will have the chance to talk at length to one of our industry experts.” Kubota Care does exactly what its name implies; ensuring tractors are cared for against any unforeseen expensive repair costs during the first five years of its life. Customers simply decide the service hour usage most appropriate to them and the cost of the scheme is relative to the hours usage purchased: 2000hrs (free of charge), 3000hrs, 4000hrs or 5000hrs. If the forecasted use is only 3000hrs over a 5-year period, for example, the Kubota Care premium and service cost will be tailored accordingly. “Kubota Care adds an extra layer of reliability to our aftercare service, ensuring that Kubota customers can always call on expert advice and one of our

20 | Farming Monthly | December 2013

close-knit network of dealers, whenever they need it.” Under the ‘service contract’, all major maintenance will be carried out by an authorised Kubota dealer and only genuine parts used as part of all servicing. Customers will also benefit from Kubota’s exchange programme, which allows them to part exchange their existing model for another M series tractor during the 5-year period. A wide range of tractor and groundcare machinery will be on display at the show, for the higher horsepower MGX range and the recently launched M6060 and

M7060 tractors. In addition, Kubota is showcasing its popular B30 series compact tractors and the mid range L4240 machines. A range of G Series ride-on mowers and the out-front F3680 will be on display. These will be accompanied by a selection of Kubota’s growing range of utility vehicles, including the RTV400Ci, RTV900 and the RTV1140. For more information on Kubota and its extensive range of solutions for the construction, groundcare and agriculture sectors visit www.kubota.co.uk or call 01844 268000.

www.farmingmonthly.co.uk

| Pests

www.farmingmonthly.co.uk

December 2013 | Farming Monthly | 21

| LAMMA

Case IH to show new tractors, loaders and balers A host of new Case IH products will be making their first appearance at LAMMA in 2014. They include the latest Farmall U Pro with cab suspension and improved control ergonomics, the new Farmlift series of telescopic loaders, Magnum CVX and Maxxum CVX tractors featuring the company’s Constantly Variable Transmission, together with the RB455 and RB465 round balers. ARMALL U PRO Available from January 2014, the latest version of the Farmall U Pro offers an improved, premium-specification cab. At just 72db (A), it is the quietest in its sector with new highly ergonomic controls, air conditioning, and best-in-class visibility. A new cab suspension system is available as an option. Designed, developed and manufactured at Case IH’s St. Valentin factory in Austria, alongside Maxxum and Puma models, the four-wheel-drive 99hp 95U Pro, 107hp 105U Pro and 115hp 115U Pro offer outstanding versatility, performance, economy and comfort. All feature fourcylinder, 3.4-litre FPT common-rail, Efficient Power engines which deliver more power and torque from less diesel. These turbocharged/intercooled Stage IIIB (Tier 4i) power units are rated at 2,200rpm but generate Constant Power down to 1,900rpm. Power is transmitted through a 32 x 32 Eco Powershift which incorporates a true Powershuttle facility. Developed, designed and produced by ZF exclusively for Case IH, it features direct-line power transfer for optimum efficiency and performance, plus an Eco facility which allows 40kph travel at 1730erpm. FARMLIFT The new Case IH Farmlift range of telescopic loaders combine compact dimensions, powerful engines and hydraulics, and multifunctional capabilities. The series comprises six models, from the agile Farmlift 525, designed especially for use in low buildings and livestock housing, to the powerful Farmlift 935, which handles high and heavy lifting work with ease. Power outputs span 74hp (Farmlift 525) to 143hp (Farmlift 635 and 742), and

maximum lift heights range from 5.7 to 9.6 metres. Case IH Farmlifts benefit from the most modern transmission technology, ensuring that they are rapid on the road and have the full force needed for high-output loading tasks. For the 632 and 935 models a 4x3 powershift and for the 635 and 742 models a 6x3 powershift with autoshift-function are available, allowing for a maximum travel speed of 40km/h. All Farmlift models are equipped with comfortable, spacious, fullyglazed accommodation offering optimum visibility. All essential functions, such as boom operation, directional of travel and gear changing, are placed at the driver’s fingertips via the machine’s joystick. As standard, Case IH Farmlifts have a hydraulic flow capacity of up to 120 l/min, while models 635 and 742 feature a variable displacement pump with a capacity of 140 l/min. All are equipped with four-wheel drive, while three different steering modes can be selected for excellent manoeuvrability and a tight turning circle. MAGNUM CVX AND MAXXUM CVX Case IH, which has more than a decade’s experience of Continuously Variable Transmission (CVT) technology, will be showing its new six-cylinder Magnum CVX and four-cylinder Maxxum CVX for the first time at LAMMA, alongside the well-established Puma CVX. Maxxum CVX EP is the first fourcylinder Case IH tractor to incorporate CVT. Versatile and costeffective, the Maxxum 110 CVX EP, Maxxum 120 CVX EP and Maxxum 130 CVX EP are rated at 110, 121 and 131Hp(cv), but all feature ‘Power Management’ which provides up to 32Hp more in transport, hydraulic and PTO applications. In addition to eight Puma CVX

22 | Farming Monthly | December 2013

models, ranging from the 131hp 130 CVX which delivers a maximum of 171hp with Power Management, to the 228hp Puma 230 CVX with up to 269hp, Case IH now offers Continuously Variable Transmission on six Magnum CVX models from 260hp to 370hp. The most powerful Case IH rigidchassis tractor, the 404 hp Magnum 370 CVX incorporates a four-range CVT which enables the tractor to move seamlessly from a standstill to its maximum speed, while the ‘Active Stop’ function provides additional control and enables hillside stops without applying the brakes. Power comes from a highlyefficient 8.7 litre Case IH FPT engine which produces 367hp at 2000 rpm and a peak power output of 419hp, with peak torque of 1806Nm from 1400-1600 rpm. An engine brake is available for heavy transport applications. This flagship model incorporates a new 5" Heavy Duty Rear Axle, longer wheelbase, larger-diameter front and rear tyres, together with a new Case IH-produced front axle which improves suspended load capacity,

ride, handling and traction. VARIABLE-CHAMBER BALERS Case IH RB455 and RB465 variable-chamber round balers provide significant increases in capacity, bale density, output and reliability compared with the models they replace. Featuring class-leading styling the two models, which produce 1.5m and 1.8m bales, are available in Standard, Rotor or Rotor Cutter feeder versions. They include improved four-bar and new five-bar pickup reels with larger, stronger components, a new net wrap system, more accurate twine wrapping, durable endless balechamber belts, together with an improved density-control system. The new in-cab control display has the option of an ISOBUS system. Setting new standards in design and performance, the RB455 and RB465 produced up to 20% higher capacity and 14% denser balers compared with competitor machines during rigorous field testing.

www.farmingmonthly.co.uk

| Pests

www.farmingmonthly.co.uk

December 2013 | Farming Monthly | 23

| LAMMA

LAMMA debut for ‘Tractor of the Year’ CLAAS UK will feature a number of new machines on its stand at LAMMA including the new CLAAS AXION 800 series tractor. This was fully launched at Agritechnica, where it won both the International ‘Tractor of the Year’ and a ‘Machine of the Year’ award for high horsepower tractors. mongst the other new machines on display will also be the new JAGUAR 800 series forage harvester and the new range of high output SCORPION telehandlers. The introduction of the new AXION 800 coincides with the 10th anniversary of the launch of CLAAS tractors in the UK, following the take-over of Renault Agriculture in 2003 and fully reflects CLAAS’ position as a leading tractor developer and manufacturer. CLAAS has manufactured over 100,000 tractors in its first 10 years, 25,000 of which were produced in the last two years alone. Sales have increased by 30%, and CLAAS are well on track to achieve a target of 25,000 tractor sales a year by 2018. CLAAS is also rapidly becoming a leader in the development of innovative but practical tractor technology, designed to provide operators with increased outputs and lower running cost. For example, the new EQ200 CVT transmission developed for the ARION CMATIC range and the new engine management systems have been developed to provide unprecedented efficiency and economy. The new AXION 800 range of tractors are powered by FPT Cursor 9 engines and are the first tractors on the market to meet TIER 4 Final emissions regulations. Four models are

Axion 800

available, all with the option of either a HEXASHIFT or CMATIC CVT transmission, and power outputs range from 215hp up to 264hp. As with other tractors in the CLAAS range, the engine is managed by a CLAAS developed advanced engine management system designed to maximise engine performance, but not at the expense of fuel consumption. This is evident in the fact that in a recent DLG Powermix Test, the AXION 850 averaged just 248 g/kwh – the lowest fuel consumption of any 200-270hp tractor tested. In awarding the AXION 800 the ‘Machine of the Year’ award at Agritechnica, the judges particularly praised the CMOTION operating lever, which fits into the palm of the hand, describing it as one of the most ergonomic control levers on the market. Also making its debut at LAMMA will be the new JAGUAR 800 series forage harvester. The new models retain the well proven JAGUAR direct drive to the main components and straight crop flow through the forager, but the new panel design provides enhanced ease of access for servicing, whilst a new cab provides greater operator comfort and visibility. Four models are available with power outputs from 400 to 598hp. However, a key feature of the new JAGUAR is the new TIER 4i compliant Mercedes engine, which develops far

Jaguar 800

greater torque than previously at lower engine revs, resulting in higher output and lower fuel consumption compared to previous similar sized models. The JAGUAR 800 range also features a new continuous high pressure hydraulic system operating at 210 bar, to provide increased capacity and rapid hydraulic reaction times. Standard specification includes a larger 1000 litre diesel tank and 130 litre Ad Blue® tank, with an additional 300 litre diesel tank available. In addition, there is a comprehensive lighting system including Xenon main lights, an onboard 600 litre/minute 9.5 bar air compressor and a 350 litre silage additive tank.

40 years of experience, it becomes obvious....

SPIRMIX JET Vertical auger mixer Feeder - Straw bedder • Fly wheel for feeding and straw bedding • Mechanic beater-bar • Side & rear trapdoor options available • A wide range from 3 12m3 to 24m

www.lucasg.com 24 | Farming Monthly | December 2013

La Boîte de Prod - www.laboitedeprod.com

See us at Lamma 2014

Feeding for the future!

www.farmingmonthly.co.uk

| Arable

www.farmingmonthly.co.uk

December 2013 | Farming Monthly | 25

| Muck & Slurry

Morris Corfield & Co Limited Benthall Works, Shropshire TF12 5BB Tel: 01952 881000

Oliver Landpower Limited Home Park Works, Kings Langley, Hertfordshire WD4 8LW Tel: 01923 265211

Craven Arms, Shropshire Tel: 01588 673325

A14 Telford Road, Bicester Oxfordshire OX26 4LD Tel: 01869 329988

Bromyard, Herefordshire Tel: 01885 488884 Chester, Cheshire Tel: 01829 749391 Romsey Agricultural Machinery Ltd Shorts Farm, Sherfield English, Romsey, Hampshire TF12 5BB Tel: 01794 323159 26 | Farming Monthly | December 2013

Nigel Quinn (AMS) Limited 89 The Marshes Lane, Mere Brow, Preston Lancashire PR4 6JR Tel/Fax: 01704 822272 Mobile: 07973 519491 www.nigelquinnams.co.uk

Wandon End, Luton, Bedfordshire LU2 8NY Tel: 01582 727111

Wilfred Scruton Limited Maxwell House, Riccall Grange, King Rudding Lane, Riccall, York YO19 6QL Tel: 01757 249799

Brian Robinson Machinery Ltd East Cowton, Northallerton, North Yorkshire DL7 0DX Tel: 01325 378552

Providence Foundry, Foxholes, Driffield, E. Yorkshire YO25 3QQ Tel: 01262 470221 www.farmingmonthly.co.uk

| LAMMA

New from John Deere at LAMMA

F440R round baler

New tractors, sprayers and Gator utility vehicles, plus a new round baler and mower-conditioner, will be featured for the first time on the John Deere stand at LAMMA 2014. Several of the machines are making their UK farming show debut, following their European launch last summer. epresenting 10 different product ranges, including six tractor series, these latest models have been designed to improve machine performance, uptime and operating costs for both arable and livestock farmers, as well as contractors. New tractor ranges on display are the 4M, 5E, 5M, 6MC, 7R and 8R Series, including the latter’s range topping 370hp 8370R wheeled and 8370RT tracked models. All feature Stage IIIB compliant diesel-only engines. Two 100hp tractors on show include the 6100MC, which has a more compact design than its 6M Series equivalent and is available with an optional low-profile cab for access to small buildings. Its durable full frame is specifically designed to accept John Deere H Series front loaders. The 5100M tractor is also available with a standard or low-profile cab and matching front loaders. In addition, the 5M Series includes open operator station and narrow versions, and offers a wide choice of transmission options. The needs of smaller-scale farmers, including speciality crop producers and part-time farmers or smallholders, are also catered for by the 4M and 5E Series three- and four-cylinder tractors from 49 to 95hp, represented at LAMMA by the 4049M, equipped with an H170 front loader, and 5075E models. The new M732i and M962i trailed sprayers are

equipped with 3200- and 6200-litre tank capacities, and can carry double or triple folding booms up to 30 or 40m, respectively. Both these models are ISOBUS ready, so the machines can communicate with the tractor and enable a range of ‘intelligent’ John Deere solutions. These include a Tank Fill Calculator, which helps the operator to calculate the correct amount of refill volumes required for each application, BoomTrac automatic boom height and tilt control and FieldDoc documentation software. AutoTrac automatic steering and boom Sectional Control are also available. A new Implement Display 1100 has been developed to control the sprayer in conjunction with the multi-function lever. The M962i also offers an in-cab nozzle control, allowing the operator to switch between different types of spray nozzle on the move. John Deere’s new heavy-duty Gator utility vehicle line-up features two new four-wheel drive models for 2014, the fast and powerful XUV 825i petrol model in green and yellow livery and the four-passenger XUV 855D S4 diesel version in olive and black. The F440R fixed chamber round baler is primarily aimed at customers who produce more than 3000 silage bales per season. This new model utilises a number of components from the premium 900 Series, for faster baling in heavy grass windrows without plugging. These include

5100M tractor with H260 front loader

a high capacity 2m or optional 2.2m pick-up and a MaxiCut rotor with 13 or 25 knives. Finally, the new 830 centre-pivot mower conditioner has a working width of 3m, with a choice of conditioning impellers or rollers. It features a reinforced frame, large tyres, improved disc protection and a redesigned transmission for increased reliability and performance, while the newly designed floating suspension system allows the machine to closely follow ground contours. As an exclusive feature, the modular cutterbar has been engineered to duplicate the load conditions of a self-propelled machine and allow high-speed mowing. The conditioner is also equipped with preloaded tines, which significantly increase capacity and the crop flow under varying harvesting conditions. These new products will be shown alongside a wide range of other John Deere tractors, sprayers, combines, hay and forage equipment, Gators and AMS GreenStar and FarmSight precision farming systems.

Next Auctions on 9th December 2013 & 13th January 2014 commencing at 10.30am

www.farmingmonthly.co.uk

December 2013 | Farming Monthly | 27

| LAMMA

Bundedtanks.com to feature new products and with exclusive show offers at LAMMA 2014 Bundedtanks.com will be at LAMMA again this year on Stand 408 at the new venue in Peterborough and will be well worth a visit. irector David Mears told us: “This is an important show for us and we are determined to make LAMMA 2014 our best yet!” The company, working in partnership with suppliers CEMO, Carbery and Apollo will be launching new products and what they call “a deal that you won’t believe!” Pressed on this, all that we were told was that there will be show offers geared specifically towards farmers and contractors which will make it worthwhile visiting the stand and ordering. However there is one big deal that Bundedtanks.com is keeping under wraps….literally (see their advert). “This will be our star offer” said David Mears. “We know that visitors shop around and check prices before buying, often returning to try and squeeze a little bit more. Whilst we are ready to offer unbeatable prices, particularly at LAMMA, we are making this offer very different indeed. All I can say is that it’s a novel approach and one that others would not be able to compete with!” The intrigue will therefore remain until the show but it will be most interesting to know what is under that cloth drape….. Roll on January 22nd!

28 | Farming Monthly | December 2013

Easy refuelling with a Fuel Station and Tractor

Filling a tractor from a Fuel Station

www.farmingmonthly.co.uk

| LAMMA

New Holland set to unveil new generation LM telehandler for the first time in the UK at LAMMA The first public showing in the UK of New Holland’s LM telehandler is set to draw interest at the prestigious upcoming LAMMA show at the East of England showground on 22nd and 23rd January.

ew Holland has completely redesigned the heavy duty six to nine metre LM range of telehandlers, which now delivers substantially improved performance together with premium operator comfort. The five model range features the LM 6.32, LM 6.35 Elite, LM 7.35, LM 7.42 Elite and LM 9.35 models, can lift up to 4,200kg and has a maximum lift height of 9.1 metres. The range benefits from inhouse design and construction, and is set to offer the world’s medium and large scale livestock farmers, large arable operations and contractors, high performance

www.farmingmonthly.co.uk

material handling capabilities. New Holland will also be showcasing variety of models ranging from the CX Elevation combine to the innovative Auto Command™ tractor range. This year LAMMA will be particularly meaningful for New Holland. The show will mark the beginning of the official celebrations for the 50th anniversary of the opening of the Basildon Tractor Plant and there will be many surprises for visitors who come along to the stand. The Basildon Tractor Plant in Essex has a long tradition of innovation and product

development, and continues to take pride in building the next generation of tractors that will shape agriculture. It has produced some of the most popular tractor models ever made: the Ford 4000, 5000 and 7000, the iconic Ford 7810 and is now home to the award winning T6 and T7 tractor series. These state-of-the-art machines have become the heart of production at the plant – a testament to the popularity of the T6 and T7 series among farmers today. More than 1.8 million tractors have been produced since 1964 and today 14,500 different tractor

specifications can be built in Basildon. The plant proudly exports 85 per cent of its awardwinning tractors to over 120 countries worldwide.

“The range benefits from inhouse design and construction, and is set to offer the world’s medium and large scale livestock farmers, large arable operations and contractors, high performance material handling capabilities.”

December 2013 | Farming Monthly | 29

| Muck & Slurry

Featured Dealers: Sharnford Tractors Ltd Lutterworth, Leics LE17 5 EH T: 01455 209300 www.manitou.co.uk Murley Agricultural Supplies Ltd Warwick CV34 5JB 01926 494336 www.murley.co.uk

30 | Farming Monthly | December 2013

Ravenhill Hereford HR4 9QJ T: 01432 352333 www.ravenhill.co.uk Farmstar Limited Marr, Doncaster DN5 7AU T: 01302 786786 Market Weighton, York YO43 3GA T: 01430 875900 Brigg, North Lincs DN2 8NF T: 01652 654944 www.farmstar.co.uk

www.farmingmonthly.co.uk

| LAMMA

New Brain Box replacement from Griffith Elder & Co Ltd After completion of testing from our development engineers, the new Bin Filling Weighing System is to make its debut in China for batch weighing liquids to a vessel. he target market for the UK is that of the poultry and pig feeding systems where a mixture of up to three different ingredients can be used to produce a batch of feed for a day bin. The system may be used for filling or emptying a bin and the bin does not need to be empty or at zero before a new batch starts. The amount in the bin is for observation only and does not affect the weights being added or removed from it. The system works by using three relay outputs. These “Parts” are used to add or subtract ingredients from a bin. The “Parts “ are set to change the amount in the bin by the amount that the part is set by. Each part starts from the weight in the bin, switches the relay from open to closed and counts up or down to the amount

www.farmingmonthly.co.uk

set and then switches the relay from closed to open again. Functions in the process allow you to pause, restart, abort and print/save. By pressing the print button the batch elements will save to memory with a batch number, date, time, part 1, 2, 3 weights and the total batch weight and (if printer attached) print out. If the process was aborted the print/save function kicks in, printing out what has been done and assumes it is a completed batch.

Stihl shows its farm workers at LAMMA Exhibiting at LAMMA 2014, outdoor power tool specialist STIHL will be showing some of its most popular products for hard-working farmers. armers, land owners and anyone working outdoors, need to know the tools that they work with are reliable and robust. After all they can’t afford to waste either money or time. STIHL outdoor power tools meet those very demands; they are specifically designed to give long-term service and built to be hardworking and tough. On show at LAMMA 2014, STIHL will display a core range for farm workers, including popular farm chain saws that are straightforward all-rounders, plus versatile brushcutters and clearing saws. They will also have a good range of brushcutter cutting heads, showing visitors how a heavyweight machine can clear anything from long grass and brambles to young sapling trees. More products at LAMMA will include a new one-man earth

auger – perfect for drilling fence and post holes, plus highpressure cleaners for washing down yards and vehicles. There will even be a choice of impressive floor sweepers; ideal for use outdoors and in, they sweep six times as fast as a manual broom (and without the hard work!). See STIHL at LAMMA or visit one of its Approved Dealers to learn more about the range: www.stihl.co.uk.

December 2013 | Farming Monthly | 31

| LAMMA

New McCormick X7 Series six-cylinder tractors set for UK launch at LAMMA An all-new range of McCormick tractors will be launched at the LAMMA show. he McCormick X7 Pro Drive series represents an important shift in design, specification and technology for the marque, which is particularly evident in the new Premiere cab where modern electronic controls will meet the expectations of drivers wanting fingertip operation of important functions. “The launch of the McCormick X7 Pro Drive is a major first step in the transformation of the McCormick product line,” says Ray Spinks, general manager and sales director at GB distributor AgriArgo UK. “Apart from the suspension axle, six-cylinder engine and cast chassis of the three biggest models, everything about this tractor is new and as modern as you can get.” Two examples of the imaginative design and engineering that have gone into the new tractor are the MySwitch multi-function button and the foldaway passenger seat. The MySwitch button on the seat-mounted console is used to perform one of four different

functions – transmission declutch, four-wheel drive, diff locks and auto powershift. Together with a simple ‘adjust and set’ system for occasional adjustments using a dial and instrument panel display, MySwitch helps keep the number of individual control switches, buttons and dials to a minimum. “Previous McCormick tractors have been praised by many operators for their simplicity and ease of control,” says Ray Spinks. “The X7 designers have achieved similar levels of simplicity while bringing modern control and many more functions into the cab.” The ingenious passenger seat is unique in the way it folds away out of sight, leaving a clear, smooth entry and exit for the cabin. The Premiere cab itself is a new design; the four-pillar structure is 180mm wider between the front pillars and the doors shut with a gentle push thanks to highspec latches and adjustable hinges. A one-piece windscreen contributes to the first-class allround visibility, while climate

32 | Farming Monthly | December 2013

Six-cylinder versions of the all-new McCormick X7 Pro Drive series will be available first, with engine outputs from 165-212hp

control air conditioning, extensive airflow ventilation and an audio system with MP3 and Bluetooth connectivity will help keep operators comfortable and content. “The fit and finish, and the interior materials used are to automotive standards, with a seatmounted console bringing all routinely used controls close to the driver,” points out Ray Spinks. “The designers really have pulled out all the stops to make this a comfortable and practical place to work.” Three six-cylinder Pro Drive semi-powershift models will be first down the Argo Tractors assembly line – the McCormick X7.660 with 151hp at rated speed and maximum outputs of 165hp for draft work and 175hp with ‘boost’ activated for pto and transport operations. The X7.670 is rated at 166hp, with 175/188hp max outputs and the X7.680 with 175hp rated output rising to 188/212hp. They will be followed by a trio of

four-cylinder models – the 131hp rated X7.440 with 143hp max; the X7.450 with rated output of 150hp rising to 160hp; and the X7.460 with 160hp rated, 166hp max draft output and 175hp for pto/transport. In the middle of the range, the X7.660 and X7.460 give farmers a choice of compact four-cylinder or heavier, longer wheelbase sixcylinder machines with the same power performance. Auto-shifting through the four powershift steps for field and road use is provided by the Pro Drive transmission, together with 40kph at significantly reduced engine speed to help fuel economy. There are 24x24 speeds as standard, 40x40 when the optional creep version is installed. Cab suspension and the popular McCormick independent front axle suspension are also available, together with 50kph and air trailer braking for safe and secure road transport.

www.farmingmonthly.co.uk

| LAMMA

JCBâ&#x20AC;&#x2122;s biggest ever LAMMA stand showcases new loaders and handlers JCB will have its biggest ever stand at the LAMMA show in January to showcase some of the new Loadall, Farm Master and skid steer materials handling machines being introduced next year. elected products will be exhibited alongside JCBâ&#x20AC;&#x2122;s established Fastrac tractors and Workmax utility ATV vehicles, with JCB Power Products contributing generator sets and lighting towers to illustrate the breadth of todayâ&#x20AC;&#x2122;s JCB product range for agriculture. JCB plans to show: Loadall 516-40 Agri With its unique offset singlespine chassis and hydraulic wheel motor propulsion, the new Loadall 516-40 Agri builds on the success of its predecessor (the 515-40 Agri) as a telehandler with the size and agility of a skid-steer loader. The new handler will lift 1.6 tonnes to 4 metres yet measures only 1.56 metres wide and 1.8 metres high. Skid steer loaders Installing the award-winning JCB Ecomax T4 engine into the larger versions of JCBâ&#x20AC;&#x2122;s unique

single-boom skid-steer loader brings up to 9% improvement in fuel economy, which together with extended air filter service life will help drive down operating costs. Farm Master 413S Agri The Farm Master 413S Agri is one of five new or improved fullsize wheeled loaders being introduced to the JCB range. All feature a new cab that is significantly larger, quieter and more comfortable, with increased stowage space. A new full colour instrument display is now set in front of the driver, and optional climate control air conditioning automatically maintains a comfortable temperature. JCB TM220 With a new engine, improved controls, stability safeguards and more refined hydraulic services, the latest JCB TM220 compact telescopic wheeled loader is even better equipped for a variety of on-

Fam Master 413S

farm handling duties. JCB Power Products Working long hours to complete a heavy cultivation, sowing or harvesting schedule can mean having to refuel, renew cultivator points or make running repairs in the dark. JCB Power Products can shed some light on these tasks with a choice of lighting towers to illuminate the surrounding area

and can provide an electricity supply to operate power tools in remote locations. Lighting towers are just part of JCBâ&#x20AC;&#x2122;s wide-ranging emergency and auxiliary power supply solutions â&#x20AC;&#x201C; petrol- and dieselengine generators from 8kVA to 3300kVA provide power wherever and whenever it is needed.

Winning with wind Now available from Spectrum Energy Systems

FREE Site Assessment

Ä&#x2026;Ĺ&#x2014;Ĺ&#x2014; *2Ĺ&#x2014;2$) Ĺ&#x2014;.+ 2$) Ĺ&#x2014;/0- $)

Ĺ&#x2014;#$"#Ĺ&#x2014;*0/+0/

Ä&#x2026;Ĺ&#x2014;Ăş(Ä&#x2DC;.Ĺ&#x2014;" ) - / .Ĺ&#x2014;ĂˇĂźÄ&#x20AC;ĂˇĂťĂ´& #Ä&#x2DC;4 Ä&#x2026;Ĺ&#x2014; $)"' Ĺ&#x2014;+# . Ĺ&#x2014; ) Ĺ&#x2014;/#-

FREE Planning

Ĺ&#x2014;+# .

Ä&#x2026;Ĺ&#x2014;ĂşĹ&#x2014;4 -Ĺ&#x2014;+ -/.Ĺ&#x2014; ) Ĺ&#x2014;' *0-Ĺ&#x2014;2 -- )/4 Ä&#x2026;Ĺ&#x2014; '$ ' Ĺ&#x2014; ) Ĺ&#x2014; Ă°Ĺ&#x2014;*- '

The highest output 10kW wind turbine on the market today. Ĺ&#x2014; $) Ĺ&#x2014;.+

Ĺ&#x2014;Ĺ&#x2014;

0/+0/Ĺ&#x2014;Ä&#x153;& #Ä&#x2DC; -Ä?Ĺ&#x2014;Ĺ&#x2014;

1 )0 ÄŠĹ&#x2014;Ĺ&#x2014;

1 )0 ÄŠÄŠ

4.0 M/S

24,590

ÂŁ6,270

ÂŁ7,623

5.0 M/S

37,360

ÂŁ9,527

ÂŁ11,582

6.0 M/S

47,240

ÂŁ12,046

ÂŁ14,644

7.0 M/S

53,520

ÂŁ13,648

ÂŁ16,591

*equates to FIT plus 100% exported energy at 4.5p/kWh **equates to FIT plus 100% energy used at 10p/kWh

Call us on: 0845 4747604 www.spectrumenergysystems.co.uk

www.farmingmonthly.co.uk

December 2013 | Farming Monthly | 33

| LAMMA

Spaldings bring new ATV New drier generation sprayers to LAMMA

The 2014 range of Master Driers that are on show at this year’s Lamma show incorporate many new features.

Showing off a selection of new products introduced throughout 2013. paldings have announced that their stand at LAMMA 2014 will be showcasing some of their biggest products introduced from the previous year. Spaldings, one of Europe’s leading distributors of Agricultural replacement parts, tools and accessories introduces around 1000 new products each year. The biggest new products of the year can be seen on their stand and include the ATV Sprayers and new Livestock range, the Rotary Sweeper and the Double Off-Set Topper. On display the customers can not only take a close look at our popular machinery but also examine our whole new range of ATV Sprayers and accessories with an option from 55 litre units to 200 litre units alongside a range of universal fitting booms and boomless nozzle kits to make sure that no matter their spraying requirements Spaldings has a suitable option. The new Rotary Sweeper will also be on show at LAMMA. This sweeper unlike

many can be mounted on the front or rear of any tractor and has the ability to work with or without the collector and on an angle. “This year Spaldings aims to ensure our customers are aware that we have relevant products for the whole of the agricultural industry. To help achieve this one of our projects this year has been to expand and promote our livestock range,” says Roger Chase, previously the Agricultural Sales Director now the overall Sales Director for Spaldings. “Moving forward we hope to raise awareness that Spaldings is not just a replacement parts company, all your farming needs from consumables to parts and grounds maintenance can be found in our catalogue and at our stand at LAMMA.” For details of these and other products supplied by Spaldings, contact 01522 507 600 or from Republic of Ireland 1800 255 455, email: agsales@spaldings.co.uk or view the catalogue at www.spaldings.co.uk

he popular 12 Ton Model is fully Galvanised and the whole range introduces ‘New Age’ Technology which can be personalised to meet individual requirements, with capacities from 10 Ton - 45 Ton and flexibility in specification. We have also imposed a price freeze! All models are available for a limited period at 2012 retail prices! The principle of drying remains the same, but, the emphasis has been to make Master Driers ‘user’ friendly. They offer efficient drying and simplified operation with manual or automatic programmes. The new operating systems are incorporated in both the Electric and PTO driven Driers. These operating systems include an Audible Alarm or Auto ‘Cut Off’ which will alert the Operator when the Drier is loaded, to avoid overflow of grain. Also included as an option is an internal Moisture Meter for monitoring temperature and moisture, together with an Automatic ‘Cut Off’ of the Burner at a predetermined moisture. The Master Eye Telephone Combinator Messaging System will keep you in touch with your Drier, alerting the operator when drying is completed or if the Drier is in need of attention. One unique standard feature on all models is the “3 Stage Burner”. It is

designed with three fuel nozzles which operate in any sequence to give a wide range of temperatures. The main advantage is that it is not necessary to change the fuel jet which simplifies the operation of the burner when drying different crops. This option is available at no extra charge! Electric Drive Models are becoming more popular as they can be fully automated and are operated by a small Siemens Computer Unit with ‘Touch screen’ controls. Incorporating a comprehensive menu control panel which gives the Operator many options depending on the crop being handled, allowing for burner ‘operating control’ and ‘top up’ facilities to compensate for shrinkage. All programmes are offered with full Automatic Mastermatic ‘Touch’ Screen Control System with manual override, all of which allows the crop to be dried to meet individual circumstances. Again this option is available at no extra charge! Masters have also introduced a new range of square section fully galvanised wet grain bins to complement its range of grain driers. These are available from 3 – 30 Ton capacities and are supplied as a flat ‘self-assembly’ kit. For more information on the New Generation of Master Driers please call us Tel: 01787 228450 or visit www. Masterfarm.co.uk

NE W RA NG E Just in!

UP TO

5m SPRAY WIDTH

Come see our new range of ATV Sprayers at LAMMA 2014 View the whole range including spot, skid unit and trailed ATV sprayers plus all the necessary accessories. RANGING FROM 55 – 200 LITRE SPOT SPRAYERS

Call us on 01522 507600 Or speak to your local representative

Order online today www.spaldings.co.uk Email us at agsales@spaldings.co.uk

facebook.com/spaldings.ltd | twitter.com/Spaldings

34 | Farming Monthly | December 2013

www.farmingmonthly.co.uk

| LAMMA

LAMMA Show debut for new Krone BiG X Krone has added two models to its existing range of self-propelled forage harvesters following the launch of the smaller BiG X 480 and BiG X 580 versions. he new Krone foragers not only excel in terms of technology but also external appearance, which is characterised by a low rear end that allows for an unobstructed view behind. An LED lighting kit is also available to provide best illumination during night shifts, while the fuel tank holds 1,500 litres and the AdBlue tank 130 litres for long working days. Krone also supplies a 200-litre silage additive tank upon request. A new pendulum frame for the front end makes header attachment even easier. A hydraulic locking system will be available on future models. The 480 and 580 models in this series drive the headers via a quick coupler. All hydraulic components and the air cleaner are mounted right next to the steps for easy access, making maintenance simpler and safer. The same applies for the crop flow system and the radiator system where plenty of space makes for convenient and fast cleaning. Kroneâ&#x20AC;&#x2122;s VariStream crop flow system remains as standard,

www.farmingmonthly.co.uk

which consists of a spring-loaded floor beneath the chopping cylinder and a spring-loaded plate behind the crop accelerator. Both models operate three chopping drums, giving the option of 20, 28 or 40 knives. VariStream ensures a blockagefree and smooth operation, even when the flow of crop is not uniform. This way, the forager is utilized to its maximum capacity but uses less fuel per tonne of crop harvested. An infinitely variable speed band of up to 40km/h is achieved by adjustable hydro motors in combination with planetary gearboxes. The selectable ASR anti-slip control allows the operator to select the system in grass for best protection and deselect it in maize for maximum traction. The new Krone foragers also stand out by virtue of narrow machine widths. For example, Big X measures a total width of 3.1 metres when running on 800/65 R32 tyres and only 3 metres when clad with 710/70 R42 rubber. This means work widths may be wide but the transport width is narrow enough to travel on public roads.

Operators who are looking for maximum ground clearance, minimum compaction and maximum ride comfort can also opt for 900/60 R 42 tyres. The front axles have been modified to a patented concept which avoids large tyres will not affect the crop flow. Independently suspended rear wheels guarantee optimum manoeuvrability and tightest turns on undulating ground, making it easy to match up with the previous work, even when operating an 8-row header. The MTU (6-cylinder inline, Tier

4 final) engine is mounted sideways in the machine, a design that offers two advantages â&#x20AC;&#x201C; the best possible weight distribution as well as a direct power flow to the chopping drum via poly Vbelts. There is no longer a powertake-off gearbox on the new Krone foragers, where all crop flow components are powered by belt tensioner. For more information contact Krone UK Ltd, Alastair Bourne on 0113 2878800 or visit www.kroneuk.com

December 2013 | Farming Monthly | 35

| Energy

Wall Planner 2014 Two Thousand And Fourteen

A useful pull-out to help plan your year ahead

M T W T F S S M T W T F S S M T W

JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC

New Years Day

Shrove Tuesday

St. Davids Day

Bank Holiday

Bonfire Night

36 | Farming Monthly | December 2013

Armistice Day

Remembrance Sunday

www.farmingmonthly.co.uk

| Energy

Farming

MONTHLY National

Observed Public Holidays

Other

T F S S M T W T F S S M T W T F S S M T

Burns Night

Valentines Day

St. Patricks Day

Good Friday

Easter Sunday

Easter Monday

St. Georges Day

Bank Holiday

Fathers Day

Bank Holiday

30 Mothers Day BST Starts

BST Ends

Halloween

30 St. Andrews Day

www.farmingmonthly.co.uk

Christmas Eve

Christmas Day

Boxing Day

December 2013 | Farming Monthly | 37

| Potatoes

Anyone serious about potatoes was at BP2013 The entire potato industry gathered again in Harrogate, North Yorkshire recently for BP2013, the key industry event of the year, with early indications showing attendance over the two days up by almost 20 per cent.

t’s clear that anyone who is serious about growing and purchasing potatoes came to the event,” comments Potato Council director Rob Clayton. “There was a great atmosphere, a really positive feeling as you moved through the trade stands. It’s been tremendous for business and hugely rewarding for the immense amount of effort Potato Council staff, board members and exhibitors put into making this event truly worthwhile.” Event exhibitors reflect on the event: “There has been a real buzz around the whole event and there has been a real vibrancy on our stand and it’s very important to be a part of it,” said Richard Clark, commercial director of BP2013 joint sponsor Branston. “Although the industry faces challenges ahead, there has been a good turnout from all sectors, just about

everyone in the potato business was here.” Isle of Wight early processing grower John Knox caught the 1am ferry to attend the event. “It’s vital to be at BP2013 to see the latest machinery and technological improvements, but the reason I would not miss the event is the opportunity to network and meet all my key customers face-to-face to discuss requirements for next season.” More than 600 growers, processors and other industry representatives gathered at Harrogate’s Majestic Hotel on November 27 for the industry dinner and were entertained by Soldier, Atlantic rower and motivational speaker, Rory Mackenzie. For Grimme, and JD Cooling it was a chance to celebrate. “We had a tremendously busy first day and firm orders include a self-propelled harvester and 6 row planter,” reported

Grimme’s sales director Barry Baker. “There has been lots of optimism, stand enquires and it’s been thoroughly worthwhile being the BP2013 joint sponsor.” For long-term exhibitors JD Cooling being at BP2013 is a must. “We’ve been exhibiting at BP events for over 20 years, but our stand has never been this busy in terms of numbers and quality of contacts as this time,” said John Dye, managing director of Norfolk based JD Cooling. “The team have been flat out doing business; we’ve closed a major deal and will go away with plenty of new leads. First time exhibitor Toyota showcased its range of diesel forklifts. “We’re definitely coming back next time,” said sales operation manager, Dave Clarkson. “BP2013 has been fantastic, the stand was manic - we’ve secured firm orders from several new accounts.”

New British potato technology company launched Target Set Technology Ltd is a new company formed to develop and promote new technologies and services to potato growers. aunched at British Potato 2013, Harrogate, Target Set Technology Ltd is a new joint venture between Standen Engineering Ltd and Target Set Ltd; the new company will be operated by board members from both companies. Bob Sykes, well known for his pioneering role within the potato industry, will play an important part in the company. New products set to revolutionise the management of potato crops, include tractor mounted Side Ridge Injection™ (SRI™) machines – a system using innovative technologies for

injecting the latest generation of chemical and biological materials directly into the side of potato ridges at high pressure for maximum effect. Target Set SRI™ 2-row machines have been undergoing development and testing in the UK, and a new 6-row hydraulic folding machine will be displayed at British Potato 2013. Target Set SRI™ facilitates high pressure injection into the potato ridge, directly to the area of greatest benefit; it also allows fine tuning of a mixture of several elements fed from individual onboard tanks.

38 | Farming Monthly | December 2013

Tests have demonstrated the potential for: Liquid fertilizer application; SRI™ brings greater control with the potential for increased yields and reduced fertilizer costs. Fertilizer can be applied through the growing season, until leaves touch in the rows Adding bio products Bio control of Potato Cyst Nematodes (PCN) Increased tuber numbers with timed phosphate injection Late application of nitrogen, prior to bulking Systems can also be fitted to existing potato planters allowing

pressure injection of liquid fertilizer and planting in a single pass, replacing fertilizer placement. Target Set Technology Ltd will continue to offer its comprehensive Precision Field Trials services to growers, covering every aspect of potato trial work.

www.farmingmonthly.co.uk

| Potatoes

HIP takes a ‘HAPI’ coordinating role A partnership of horticultural innovators has been awarded the role of coordinating the Horticulture and Potato Initiative (HAPI) sponsored by the Biotechnology and Biological Sciences Research Council (BBSRC), in partnership with the Scottish Government and the Natural Environment Research Council, to improve food security for some of the world’s most valuable crops. he Horticulture Innovation Partnership (the HIP) was formed in 2013 to stimulate innovation in the UK horticulture and potato supply chain and will take the lead in the coordination of HAPI. It will bring academic researchers and industry together to deliver improved yields of better quality fresh produce through more sustainable farming practices. The fresh produce sector is an important component of the food security equation which must enhance its competitiveness and resilience by increasing production, reducing waste and improving sustainability. HAPI supports research projects on these crops with a total value of £7m funding. The initiative addresses these challenges through pre-competitive, innovative and excellent science, forging productive networks and knowledge exchange and will be coordinated by the HIP’s Mark Tatchell and David Cole in conjunction with BBSRC. Tatchell said, “HAPI provides new opportunities for a forward looking sector to engage with research. Leading-edge science has translated into important industry innovations over the years. HAPI should foster a new injection of knowledge for growth when rapid scientific advancement is coinciding with

unprecedented challenges for producers.” “The close engagement between the HIP and HAPI will help build a science community doing work of direct relevance to the industry. Through this closer engagement it should also hasten the translation of results into practice to drive growth." The HIP which was launched in March this year, won the competitive tender from BBSRC to coordinate HAPI. The HIP will stimulate high quality research applications which benefit the supply chain and address the broader aims of HAPI through its networks to bring researchers, knowledge transfer and the commercial supply chain together. It will improve the flow of basic science to business, fostering knowledge transfer and pathways to impact. Involvement in HAPI is an important component of HIP’s role in unlocking barriers to the impact of innovation, bringing benefits for business growth and to society. David Cole of the HAPI Coordination team said “HAPI offers researchers an exciting opportunity to develop new knowledge and tools which can help the fresh produce industry respond to the special challenges of the 21st century. This is opportune at a time when new funding mechanisms are coming into place to bring science closer to the industry.”

The first round of HAPI-funded projects has been approved and the call for second round projects will open on 13 January 2014. A consortia building workshop will be held in London on 20 January 2014 to promote the first call. For further information and to sign-up to the workshop visit www.bbsrc.ac.uk/hapi

New potato nozzle technology gets sprays on target New Syngenta potato application trials have identified potential innovative design features that could further enhance consistent spray deposition through the crop canopy, as well as improved drift control to provide more spraying opportunities. The success of the R&D trials has instigated a full prototype field evaluation for the coming season. he new prototype Syngenta Potato Nozzle developed as part of the Syngenta Potato Science initiative - has refined the importance of spray angle in achieving penetration of the crop canopy, which is now capable of retaining more even distribution in the top, mid and lower leaves and stem. The design held 15% more spray in the mid canopy, compared to the current Syngenta Potato Nozzle, and up to 35% more than some other angled nozzles used in the trial. Reporting on the trials at British Potato 2013, Syngenta Application Specialist, Ben Magri, added: “Importantly, the new design also retained the spray penetration down to the bottom of the canopy. That would assure greater coverage of lower leaves and stems for better blight prevention and to enhance the performance of Reglone desiccation applications, for example.” “The new nozzle design

www.farmingmonthly.co.uk

delivered 94% greater spray deposition in the mid and bottom canopy, compared to traditional flat fan nozzles,” he reported. In fact, traditional flat fan nozzles gave the poorest performance in terms of spray distribution and retention through the potato crop canopy, as well as issues with drift when conditions were anything but ideal. Mr Magri also highlighted that spray deposition in the crop proved largely irrespective of water volume. “Our recommendation would be to use 100 l/ha early in the season, to maximise retention on the smaller leaf area and optimise sprayer output. Once crops meet across the rows, however, the minimum water volume should be increased to 200 l/ha,” he advised. The Syngenta Potato Nozzle prototype design will initially be manufactured in 03, 04 and 05 sizes, to deliver the desired water volumes at spraying speeds of around 10 km/hr. New nozzle

manufacturing capability will enable a short production run of nozzles for full field-scale evaluation under various conditions, prior to commercial availability in 2014. In the initial trials the new nozzles were operated to alternately face forwards and backwards along the spray boom;

a configuration Mr Magri believed would optimise spray penetration and minimise the risk of drift. Syngenta would like to convey thanks to Babraham Farms and Farm Spray Operator of the Year regional winner, Jonathan Goody, for their help and expertise in undertaking the trials.

December 2013 | Farming Monthly | 39

| Muck & Slurry

Tramspread have slurry New look XCEL spreader handling covered at LAMMA Tramspread was established in 1988 and is based in Mendlesham, Suffolk. The company took its name from the patented ‘Tramspread system, a twin outlet slurry tanker attachment spreading in tramlines to a width of 12m and invented by company founder Terry Baker.

In addition to representative models from its diet feeder and vacuum tanker product ranges, at LAMMA Hi-Spec Engineering will also be showing the new version of the unique XCEL 1250 rear discharge spreader. nlike other rear discharge spreaders, the XCEL 1250 is unique in that it uses a rotary chain and flail system to achieve a good break up of material, which is then spread using a pair of spinning discs. This has the benefit that in the event of a solid object, such as a lump of concrete, being encountered, this will pass through without causing any damage to the spreader, unlike a spreader fitted with vertical beater bars where there is the potential for costly damage to the rotors or bearings.

riding ourselves on exceptional build quality we now manufacture a wide range of slurry handling equipment including umbilical and tanker applicators, hose reels and pump units. They are all thoroughly tried and tested by our contracting operation, Tramspread Contracting Ltd, who accurately applies thousands of tons of slurry and digestate each year throughout East Anglia and beyond. Tramspread are the sole UK distributors for Reck slurry mixers, Nock separators, Hexa-Cover floating cover and Albers Alligator liquid storage systems. We also

import the Bauer, Joskin and Vogelsang range of equipment. As well as Hilcoflex and Snap-Tite drag hose and the Agri-Tank concrete slurry store. Therefore, whatever your slurry or digestate handling needs, we have the equipment, knowledge and experience to provide you with the best solution you need to store it, cover it, stir it, separate it, pump it or spread it. Tramspread are the specialists when it comes to digestate and slurry handling. Contact us today – Tel; 01449 766133 email info@tramspread.co.uk www.tramspread.co.uk

40 | Farming Monthly | December 2013

“From the flail rotor, the broken-up material falls onto two hydraulically driven 960mm diameter spreading discs.” The new XCEL 1250 spreader

has a solids capacity of 12 tonnes, with a loading height of just 2.5 metres, and now features a new curved side panel design that provides an increased internal volume for greater capacity. This new design also has the advantage that it reduces the risk of material bridging. To carry material to the slurry door at the rear of the spreader, the new XCEL 1250 is fitted with marine type double floor chains, that are suitable for use with a wide range of manures, both solid or liquid, sludge or very dry chicken manure. To keep downtime to a minimum, the chain can now be quickly tensioned manually and the hydraulic system has been simplified. As previously, material for spreading is initially broken-up by a patented and well proven chain flail and spinning disc system. The heavy duty marine grade chains

www.farmingmonthly.co.uk

| Muck & Slurry are attached to a horizontal rotor and have a 10 tonne breaking capacity. Each of the chains is fitted with a Hardox steel flail to effectively break-up even the densest of manure. Hardox hard wearing plate is also now used in all the critical wear zones throughout the spreading system for added durability, reliability and minimal downtime. From the flail rotor, the brokenup material falls onto two hydraulically driven 960mm diameter spreading discs. Both discs have shear bolt protection and are fitted with two spreading vanes. For lighter, dry material such as chicken litter or pellets, six-vane discs are available as an option. Depending on material, the twin rotors give an even spreading width from 16 to over 20 metres and enable a full 12 tonne load to be spread in about 3-5 minutes. As part of its standard specification, the new XCEL 1250 is fitted with a wide angle PTO, driving a 200hp rated gearbox, and the spreader’s main transmission system is protected by an over-run clutch and shear bolts. To ensure that compaction and rutting is kept to a minimum, the XCEL 1250 is carried on 580/70R36 tyres with hydraulic braking, and it is also fitted with high visibility LED lighting with protective covers.

For further information contact Gordon Brodie (North of England & Scotland Area Manager) on 07799 905130 or email gordon@hispec.net or contact John Molton (South of England Area Manager) on07825 330887 or email john@hispec.net

Maize strip-till system The benefits of strip-tillage crop establishment, including reduced fuel use, improved soil structure, greater rain retention and better traffic travel, are now available to maize growers. esigned specifically to allow the injection of slurry into tilled soil strips, and the subsequent drilling of maize into those same cultivated bands, the XTill has been developed by German slurry equipment specialist Vogelsang to create not only a method of min-tilling maize, but also a much-improved way of applying slurry to land so that its odour is contained, risk of any runoff is minimised, and its nutrients are made available exactly where required by crop rooting systems. The 6m folding XTill weighs just 2.5t, and can be easily handled by most tanker-mounted external linkage systems with category 3, 3N or 4N ends. It comprises eight width-adjustable units on parallelogram linkages, each of which is pressured hydraulically and depth-controlled individually. These units consist firstly of a cutting disc with a centre base for accurate depth control, each followed up with an angled star wheel which clears stubble and other trash. Slurry is then fed from the tanker down a pipe and coulter

www.farmingmonthly.co.uk

running in each opening, with angled pairs of notched discs then following to refill the slot with loose soil. Finally, pairs of angled steel or rubber press wheels firm loose soil back into the slot. In addition to the S-spec slurry version Vogelsang is also offering a Bspec version of the XTill without slurry injection equipment for use with liquid fertiliser systems. “Slurry can be applied at depths from 15-25cm, and it is retained within the pore spaces of the tilled band of soil,” explains Sion Williams, Vogelsang UK agricultural sales manager. “Using the placing precision made possible by GPS-guided steering systems, maize can then be drilled along the same rows, at 3.75-5.0cm depth. Where slurry injection has been carried out, this can be done as little as four to five days later, or as much as six weeks. “In this way there’s no risk of scorch to the germinating seed, and roots can grow straight downwards towards moisture and nutrients contained within the tilled

strip. In dry conditions, water evaporation is prevented by the previous plant matter on the surface, and the non-inversion of the soil, while in heavy rain the movement of water is aided by the tilled soil rows.” Mr Williams points out that further benefits of minimum tillage maize establishment include reduced potential for weed establishment, courtesy of reduced soil/weed seed disturbance, and improved soil water storage capacity, as the process eliminates the need for multiple cultivations, which can reduce numbers of soil pore spaces. “In addition, travel conditions at

harvest for the forage harvester and trailers are improved, as the untilled soil strips help support their weight, while because fewer passes are made and less soil is moved, to establish the crop, fuel costs for maize establishment are lower under the XTill system, and the structure of the soil is improved because none is inverted and far less is moved.” An online cost reckoner at http://www.vogelsang.info/xtill/en/k ostenrechner.php allows potential users to calculate how much the system could save them in establishment costs. More on the XTill concept can be found at www.vogelsang.info/xtill/en/

December 2013 | Farming Monthly | 41

| Animal Health

Pig campaign underestimates potential risk Celebrity campaigners championing the use of swill as an environmentally-friendly food source for pigs are underestimating the disease risks which saw the practice banned, say vets at the British Veterinary Association (BVA). ampaigners from the ‘Pig Idea’ held a feast event in central London encouraging the public to back a loosening of current European legislation. Existing legislation bans the use of products which have entered the human food chain, such as restaurant waste, from being fed to pigs as ‘swill’. Swill feeding, including scraps from restaurants and schools, was common in the UK until a ban was enforced in 2001. Evidence suggested meat fed to pigs in swill

was behind the devastating outbreak of Foot and Mouth that year and a Europe-wide ban followed in 2002. BVA President Robin Hargreaves said: “We appreciate the efforts of campaigners to encourage the pig industry to use legal waste products from the food production industry, such as hops and whey. We understand that the pigs featured at the event had been fed on garden and bakery waste. This is a safe and legal approach

already widely adopted by many pig farmers. “However, the legislation barring traditional swill feeding has been very effective in protecting the UK against further outbreaks of diseases such as Foot and Mouth, classical swine fever and African swine fever. While a return to swill feeding seems appealing on the surface, we remain concerned that checks could never be enforced effectively enough to ensure that no traces of meat, including pork products, were included in feed.”

Pig Veterinary Society (PVS) President Grace Webster said: “Strict controls on pig feeding exist to shield pigs and other livestock from disease and have been extremely effective in preventing outbreaks. We would like to remind pig owners that these laws remain unchanged and they should continue to avoid swill feeding in order to protect their animals.”

Treat any lame sheep before Winter housing Wet and muddy underfoot conditions are exacerbating sheep foot problems and flockmasters are being urged to implement the five-point disease reduction plan and certainly treat any lame sheep well before winter housing. igh rainfall in many areas and the relatively mild early autumn temperatures are combining to create the perfect environment for lameness problems to proliferate. Footrot and scald bacteria thrive in warm, damp conditions so it is important to treat any lame sheep as quickly as possible to minimise the spread of disease. Keeping on top of things now will help reduce problems over the winter and into next spring,” says independent flock lameness expert Ruth Clements MRCVS from FAI Farms. Ms Clements also urges shepherds to ensure any flock handling operations are as quick and as clean as possible at this

time of year. “Whenever sheep are in close contact with each other the disease spread opportunity increases,” she says. Producers should also start thinking about the timing of winter vaccination against footrot. “Housing or scanning time is an ideal opportunity to begin vaccinating as it can help build disease immunity in advance of key risk periods, such as when the disease challenge rises for any ewes over-wintered on wet pastures. “And don’t forget your tups too,” she says. “Tups may need special attention at this time of year as the additional work during the tupping season and close contact with

Keeping on top of sheep lameness problems now will reduce potential problems over the winter and into next spring.

ewes can leave them susceptible to lameness problems. Treat any cases rapidly to minimise disease spread and maximise fertility.” Prompt treatment of lameness cases, avoid the spread of infection during handling operations and flock vaccination are three of the five key management tasks integral to the successful implementation of the

proven five-point lameness reduction plan. Quarantining oncoming animals and culling persistent cases are the other two important strategies. A free guidance note on implementing the five-point sheep lameness reduction plan is available from FAI Farms. Call 01865 790880 for further information.

New DVD addresses animal welfare needs in road traffic accidents A new training DVD has been produced in conjunction with the Fire and Rescue Service (FRS) intended for emergency personnel responding to road traffic incidents involving farm animal transport vehicles. he training programme was produced in collaboration with the Hampshire Fire and Rescue Service and livestock transport vehicle manufacturers by livestock engineering consultant Peter Kettlewell and livestock transport consultant Eddie Harper MBE, co-sponsored by the Humane Slaughter Association, the Royal Bath and West of England Society and Crowe Livestock (Amlin plc). It covers all aspects of safe, effective and humane handling of animals in incidents involving the main types of livestock transport vehicles currently in use in the UK. “During 2010 in the UK, journeys from farm to slaughter alone accounted for the movement

42 | Farming Monthly | December 2013

of over 3 million cattle, 10 million pigs, 30 million sheep, 40 million end-of-lay hens, 16 million turkeys and over 850 million broiler chickens. Typical large vehicles may carry around 50 cattle, 220 pigs, 450 sheep or 6500 broilers”, commented HSA Technical Director Charles Mason. “This indicates the scale of the potential need for expertise in emergency response to accidents involving these vehicles.” The comprehensive programme, entitled ‘Livestock Transportation: What’s the risk?’, provides details of different types of livestock containers and how they can be safely accessed when compromised in accidents.

There are also sections on animal behaviour and welfare to assist when livestock needs to be evacuated and for dealing with animal casualties. The DVD has been distributed by the FRS to all Fire Services throughout the UK, and is also available to other agencies and personnel, such as police and veterinary services, who work together to ensure effective resolution of such incidents. Further information about the programme and its availability can be obtained from Peter Kettlewell, email peterkettlewell@rocketmail.com, telephone 07966 350069.

www.farmingmonthly.co.uk

| Sheep

Sheep industry to be saddled with extra bureaucracy and cost but zero benefit National Sheep Association (NSA) is bitterly disappointed that Defra has taken little notice of the sheep industry’s view and forged ahead with its decision to implement full EID in England, even in lambs going directly to slaughter that pose no traceability or disease risk. hil Stocker, NSA Chief Executive, says: “Given the wording of the consultation and comments made by Owen Paterson and Defra officeholders during the consultation period, it appears that Defra had already made its mind up and was wasting our time and resources by asking us to present our views. It was clearly a ‘done deal’ and a decision that was made without any risk assessment of what the industry can afford and implement. “NSA felt very strongly that even if Defra wanted to remove the option of the non-EID slaughter tag there was no justification for applying this right across the board and including lambs when their first and only move is straight to an abattoir, with no other collections, mixing or unloading in between. The disease risk is so low for these moves that EID tagging cannot be justified and is simply adding bureaucracy and costs with zero benefit. NSA’s consultation response made it very

clear that if the sector was going to take any additional burden with these rule changes, Defra must respond by providing benefits.” The most basic benefit requested by NSA was speeding up work on the recommendations made in the Macdonald report to reduce red tape, but over the slightly longer term NSA also prioritised the re-opening of discussions on cross compliance tolerance in Brussels, doing away with the six-day standstill (as done in Northern Ireland earlier this year) and introducing an equivalent level of mandatory recording and reporting further up the supply chain, so the investment made by farmers is offset by the receipt of useful carcase information. Mr Stocker continues: “If Defra is determined to force through a decision that the industry clearly voiced its opposition to, we must see an urgent increase in activity around the task force recommendations and the fight for tolerance.

The Dilemma of EID Addressing the concerns about Electronic Identification here is still a great deal of confusion about the rules for the Electronic Identification (EID) of sheep. On Thursday 21st November, John Carroll, Head of Animal Traceability at South Western Business Services, Kate Phillips, Principal Livestock Consultant at ADAS and Angus Stormonth Darling, StockTrace Managing Director hosted a talk at McCartneys, Ludlow to highlight how increasing EID requirements might affect sheep farmers. In 2014 the sheep industry will see many changes. DEFRA have issued a consultation which is likely to mandate the use of EID tags for all slaughter animals. This will have a major impact on many farmers. In April next year the new National Database will be implemented by South Western, bringing electronic movement reporting another step closer. Now is the time to address how the increased EID requirements will affect farmers. John Carroll, Head of Animal

www.farmingmonthly.co.uk

Traceability at South Western will introduce the company and explain the role it will play. Kate Phillips, Principal Livestock Consultant at ADAS said: “It seems likely that EID is here to stay. Although the prospect may be unwelcome to many, Electronic Identification can offer several benefits to farmers. Measuring and monitoring performance can help to identify areas for attention and help farmers to improve flock productivity. The important thing is to find a solution that is right for each farming operation.” Angus Stormonth Darling, Managing Director at StockTrace said: “The EID journey can be taken step by step and should not be overwhelming. After the talk on 21st November farmers were able to see how easily EID can be used on farms.” If EID feels like a burden, or the rules are unclear, or if the new National Database is a concern, please contact ADAS or Stocktrace.

“NSA is also incredibly frustrated by the lack of connected activity between England and Wales and would like to see the Welsh Government make some much needed decisions on whether they are going to implement the same changes as England or operate with a different system. We are in a ridiculous situation where there will be significant changes in England in 2014 with the introduction of the electronic database, more

upheaval in 2015 with the removal of visual tags, and presumably more changes again further down the line when Wales catches up. This is not only an issue for cross border trade but also makes life difficult in terms of farmers in neighbouring areas having to understand different sets of rules.”

NSA launches Ambassador programme Also launches new website for next generation sheep farmers. ontinuing its commitment to young people in the sheep sector, the National Sheep Association (NSA) today launched an exciting Ambassador Programme and a new website as part of its NSA Next Generation project. “We unveiled this project at our Sheep Event in July last year and have been working on it ever since, particularly to bring together the different elements of NSA’s existing activity for young people, such as our Young Shepherd of the Year competitions, the scholarships our regional committees offer, and helping people find work experience placements and employment within our network of farmer members,” said NSA Chief Executive Phil Stocker, speaking at an on-farm event in Wiltshire today. The event, held jointly with RASE, had a very positive feel and attracted around 60 young people interested in getting onto the sheep farming ladder. It was hosted by Tim White, a first generation farmer who opened the gates at Manor Farm, Sutton Mandeville, Wiltshire, and spoke about his experience of having no family farm business behind him but building up a thriving enterprise, now running a flock of Exlana sheep on rented ground over a 100-mile radius.

He was joined by four other speakers (one via video) all under the age of 35 and running successful sheep farming businesses. Phil Stocker continued: “Today was the perfect opportunity to unveil the next phase of NSA Next Generation, which now has its own branding and a dedicated website signposting young people to opportunities within the sheep sector. The www.nsanextgeneration.org.uk website provides links to training, funding and scholarship opportunities, it lists colleges and universities around the UK offering agricultural courses, and offers advice on starting your own sheep flock. It also brings together all the existing NSA activity, including our very popular matchmaking service for students looking for on-farm placements at lambing time. The website will be added to over time and we welcome comments from people with suggestions for additional content.

December 2013 | Farming Monthly | 43

| Security

Farm security assessment available to download Thames Valley Police have produced a farm security assessment for farm owners, managers, employees and land owners to help them improve the security of their premises. he security assessment has been put together by Thames Valley Police’s crime prevention and reduction advisors and contains advice on low cost security solutions in a common sense approach. In the assessment you will find crime prevention advice about: • Controlling access to farms • Tools • Metal theft • Agricultural machinery protection

• • • •

Field security Livestock Wildlife crime Out buildings Home security You can view and download the farm security assessment from the Thames Valley Police website. Protect your agricultural or plant machinery with 20 per cent discount on CESAR security kits Thames Valley Police continue to offer a discount on Datatag’s CESAR (Construction Equipment

Security and Registration) kits to residents living in Oxfordshire, Buckinghamshire and Berkshire. The benefits of getting your equipment registered with CESAR include: • Easily identifiable machinery • Swift identification should your machinery get stolen • Swift return of stolen machinery to the rightful owner • CESAR security symbol on the machinery will deter thieves The standard price for the

CESAR kit is £149 plus VAT. The Thames Valley Police discount allows residents to have the kit installed for £88 plus VAT Find out more about the CESAR scheme on the official website. To take advantage of this offer, call the Datatag booking line 01784 778 310 and mention Thames Valley Police. NFU Mutual also offers a security discount to their members when your vehicle is registered with the CESAR scheme.

NiteSite Spotter New improved, safer & more accurate night vision from MLS. he NiteSite Spotter is the ideal piece of equipment for anyone working at night in security, surveillance and wildlife observation. Distributed by MANS Location Services (MLS), the NiteSite Spotter is a handheld night vision device using infrared technology to provide distinct night vision at a distance of over 400 metres in total darkness. Whether it is for security, finding lost or injured livestock or tracking down pests good night vision is a huge asset to anyone working in the countryside at night. The design of NiteSite Spotter provides just that. Its design allows for the operator to have their head up and remain mobile giving a wide field of view. The NiteSite Spotter features an impressive 20x optical zoom, which can be quickly and easily adjusted and refocused as an operator pans around. It also has a battery that provides two hours of continuous use and can be fully re-charged in 7-8 hours.

It can be used almost immediately as it can be switched on and functioning within seconds. Its focus and zoom controls are perfectly positioned to accommodate both left-handed and right-handed users and can be easily operated with or without gloves. The NiteSite Spotter is fully BS8484 compliant and is ideal for lone workers who need safe, non-confrontational surveillance and it can be used in any conditions as it is fully operational between temperatures of -20°C to 60°C. Mike Napper, managing director of MLS said: “This is one of the most remarkable and effective products I have ever handled. The NiteSite Spotter is ideal for anyone working in the countryside at night that needs to monitor animal movements or observe potential intruders during the hours of darkness because of its superb range and ease of use.”

44 | Farming Monthly | December 2013

www.farmingmonthly.co.uk

| Buildings

Superdeep 170 exceeds expectations on agricultural building

Small-holder Mr Tom Farmer

SuperDeep 170, the high-strength, high-volume guttering system from Kayflow, has been installed on a 75ft agricultural building in the depths of the Shropshire countryside. Supplied in Grey through approved stockist Venture Building Plastics, it replaces the shed’s original cement-fibre rainwater system. etired maintenance engineer and small-holder Mr Tom Farmer needed a new system with a much greater capacity; he was finding that the cement-fibre system was no longer performing, “…it’s been up there 20 years, since we built the shed. While the material itself is ok and has stood the test of time, the capacity hasn’t; it’s no longer adequate,” he said. “We have been getting more flash storms with large quantities of rain falling in short, sharp bursts and the current guttering just can’t cope with it; the rainwater simply comes pouring over the side.” While tolerable on the exterior wall, the guttering system running down the opposing length of the shed has to manage run-off from two roofs with differing pitches, as a 60ft x 20ft roof canopy was installed ten years ago to provide cover between the farms original Dutch barn and the shed. With almost twice the volume of rainwater the ‘internal’ guttering system has been failing dramatically, with the

area beneath becoming sodden causing an unpleasant surface run-off and affecting the quality of the feed and damaging stored machinery and equipment. Having researched modern guttering systems Mr Farmer was aware of those with a much deeper capacity but the SuperDeep 170 has exceeded his expectations, “It is a much better product. I have looked at a number of systems and this one is by far the best. It’s not just the depth of it but also the shape of the gutter, it’s more oval than round which means that it’s still a manageable system; it’s not all high sides – it’s wide and deep.” The SuperDeep170 system was installed in a day; once the brackets were in position the guttering simply clicked into place. Recommended for fixing at 600mm intervals, each fascia bracket is able to carry a weight of 125kg, that’s around 19.5 stone - more than enough to handle a gutter full of water, ice and snow. “I was particularly impressed with the

Guttering before

Superdeep 170 system installed

brackets and fittings,” continued Mr Farmer. “They’re twice as strong as the ones I had originally looked at, they’re far more robust.” The gutter profile is white on the inside. This deters heat build-up a common enemy of any guttering system. The system is available in both black and grey. On this installation each downpipe has been encased in a concrete ‘shoe’ where it joins the drainage gully, a precaution in many agricultural and industrial applications. With a market leading flow rate of around 10 litres per second, the SuperDeep 170 has the capacity to carry over 10 times more water than a standard half round gutter and at least five times more water than a standard deepEmyr system. and the boys

CE welding courses Courses to ensure welders are already working to CE Marking standards are being run by RIDBA. teel frame manufacturers and contractors who are members of RIDBA (the Rural and Industrial Design and Building Association) are getting exclusive help welding their agricultural buildings to the imminent new CE Marking standards. One of the requirements of CE Marking, which becomes compulsory in accordance with the Construction Products Regulation and BS EN 1090 next July, is that all welding must be controlled by a competent Responsible Welding Coordinator (RWC). So as well as giving its members help with designing and loading steel frames, RIDBA launched a two-day RWC course to train members’ employees to carry out the RWC role and to date more than 50 candidates have been through the system. Marcus Minshall, of Shropshirebased design and build contractor Minshall Construction, is one of those. Already coded to BS EN 287, he is responsible for supervising the company’s team of

www.farmingmonthly.co.uk

more than a dozen welders. He has now almost completed the task of implementing what he learnt on the course so that Mick Hurt, the CSWIP-qualified tutor, can confirm he is a competent RWC. “There was a lot of new information to take in, much of which was quite technical, but we are confident that Mick Hurt will be happy with the systems we have been fine-tuning to constantly check we are adhering to the new procedures,” he said. “I have a good group of guys here who are all focussed and conscientious and they have appreciated that a paperwork trail is required for CE Marking and that any company that isn’t CE Marking by next July will not legally be able to sell their frames. “In the meantime, our RWC accreditation means our customers are even more assured of a quality job. It keeps us at the forefront of our industry.”

December 2013 | Farming Monthly | 45

| Arable

Survey suggests 22% increase in wheat area for harvest 2014 AHDB/HGCA’s Early Bird Survey of farmers’ planting intentions shows a sharp rise in the total area of wheat and winter barley for harvest 2014 compared to last year. he team of agronomists assessing 280,000ha of arable land across Great Britain forecast that the total wheat area, including spring wheat, will increase by 22% to 1.98m hectares at the UK level. In this annual autumn survey, which provides the industry with a first snapshot of national planting decisions, cropping changes on individual farms in GB were taken as a representation of national UK changes, assessing crops already drilled and growers’ planting intentions. Jack Watts, AHDB/HGCA Lead Analyst, said: “This autumn we’ve had good drilling conditions across the UK and, as a consequence, we are looking at a return to a more normal cropping mix for harvest 2014 following a large shift to spring cropping in 2013. The return of a more normal UK wheat area is the first step to the UK returning to the export market, although yields and quality remain weather dependent. History shows that when farmers are able to turn intentions into reality, the Early Bird Survey gives a good indication of areas for key autumn sown crops

in the UK.” Winter barley is also set to increase 55% to 484,000ha compared with 2013, and is the highest UK winter barley area seen in a decade. Additionally, the survey predicts the second highest oilseed rape area ever cropped, behind 2012, at 740,000ha; an increase of 3% against the estimated harvest area of 2013. Due to the good autumn planting conditions compared with last year, areas of spring barley, pulses and fallow land are expected to fall to pre-2013 levels. The spring barley area is forecast to drop 40% to 534,000ha and, although the oat area looks set to decrease by 26% to 130,000ha, this still represents a relatively large area of oats. Jack Watts added: “The conditions in 2012/13 led many farmers to change their usual crop rotations, and some famers will still be dealing with the consequences of this.” The Early Bird Survey is led by the Andersons Centre, supported by the Association of Independent Crop Consultants and HGCA, the cereals and oilseeds division of

AHDB. The full Early Bird Survey results are printed in the latest issue of Prospects, which is available from HGCA. AHDB/HGCA’s December Planting Survey, issued on 1 December with results published in February 2014, will help the industry gain a more detailed insight into plantings for 2014.

Plant ageing gene key to food supply Breakthrough science with the ability to control the life-cycle of plants could be the solution to increasing food production as population exceeds nine billion by 2050. urrent estimates by the United Nations (UN) suggest that global agricultural production needs to increase by about 70 per cent between 2005 and 2050 to satisfy the growing demand for food and agricultural products. However, innovative work by researchers at the University of Münster and Fraunhofer Institute for Molecular Biology and Applied Ecology, Germany, could provide the answer to increasing food productivity and yields. Their work has identified key regulatory genes in plants that ‘switch-off’ flowering and allow plants to live longer, grow faster and become bigger. The teams at Münster and Fraunhofer made the breakthrough after discovering a mutant tobacco plant which showed permanent vegetative growth, no aging, evergreen leaves and late or no flowering. Analysis revealed that the plant has a special protein which inhibits the flowering process. The result is a plant which can grow up to eight metres, compared to a normal size of 1.5 metres. It also has around

120 leaves, compared to 20 in a normal variety. The discovery creates a new approach to farming and is an alternative to genetically modified (GM) foods and traditional methods of improving crop varieties. The chemical engineering potential of Münster and Fraunhofer’s work resulted in them being highly commended at the Institution of Chemical Engineer’s (IChemE) Annual Awards for Innovation and Excellence, earlier this month. IChemE’s chief executive, David Brown, said: “The UN estimates that about 80 per cent of required increased food supply will need to come from improvements in productivity, such as higher crop yields. Pressures on land use are also predicted to increase with a net expansion of arable land of about 70 million hectares1. “The teams at Munster and Fraunhofer are helping to meet this challenge with their innovative work, which creates

46 | Farming Monthly | December 2013

a new way to produce economically stable food supplies as population growth puts increasing pressure on valuable resources. “The development is also significant in other ways. The cultivation of high-biomass crops could be a valuable source of sustainable energy and help reduce tensions over land use between biofuel and food production”. The role of chemical engineers in the food and energy sectors is explored in IChemE’s latest technical strategy, Chemical Engineering Matters. The strategy also includes actions chemical engineers are taking on other global challenges including water and health.

www.farmingmonthly.co.uk

| Arable

BCPC Weed Review looks at the weed challenges over the past 50 years Over 90 delegates attended the 50th BCPC Annual Weed Review chaired by Dilwyn Harris, Dow AgroSciences and held at Rothamsted Research, Harpenden on 14 November. ignificant arable weed control challenges have faced farmers, scientists and the industry over the past halfcentury,” explained Mr Harris. “This review has given us the opportunity to reflect on the hurdles encountered and consider the progress made. It also provided a platform for post-graduates to profile their current weed research in the poster session. ” Kicking off proceedings, Bob FroudWilliams, ex Reading University titled his session Fifty Shades of Weed Research. “Over the past 50 years, selective herbicides have significantly modified the weed flora. Alternative herbicides have been introduced and there has been the inevitable development of resistance,” he said. “Weed populations have been subject to oscillation and herbicides have influenced species prevalence and the decline in density in seed banks. There have also been changing attitudes to weeds with agrienvironment schemes and the importance of biodiversity encouraging more game cover and wild-bird seed mixes to be planted. Horticulture, once the recipient of herbicide development, is now in crisis as many herbicides are relegated to the litterbin. What we have achieved though is a multidisciplinary approach to weed science, an increase in weed knowledge, biology, persistency in the soil, demographics and how to manage weeds and resistance. The decline in expertise in weed science in recent times needs to be addressed to ensure effective future weed management.” In an extremely visual presentation, Noel Nelson from The Met Office looked at Weather patterns in the UK. “Although variations do exist from year-to-year the general weather pattern in the UK is of a temperate climate,” explained Noel. “Average weather considers a 30-year period and is a good marker of what is happening but it does mask variability especially of rainfall which can be very localised and more complex to understand. What we are seeing is a trend to more heavy rainfall events increasing in the winter and falling in more intense bursts.” He explained that although the Met Office and other global models show an increase in rainfall and they are confident that warming is occurring, they are less confident in the amount of warming. “The ingredients are there for climate change with warm, wet and dry extremes but the natural variability is large and will dominate the climate in the near future,” he said. Following on Jim Orson, NIAB/TAG considered weather patterns and how they can effect weed infestations and herbicide control. The UK is one of the top three countries along with Ireland and New Zealand that can sustain high wheat yields and this seems to be due to its island location along with the soil and climate. “In the UK we are very reliant on the weather and there has been a trend to autumn spraying which provides more reliable control,” explained Jim. “Black-grass control in autumn sown cropping systems is increasingly dependent on rainfall as the activity of some

www.farmingmonthly.co.uk

products is more affected by drought than others. It is vital for farmers to use weather forecasts and think around the issues so that optimum performance is achieved.” Andrew Cotton, Cotton Farm Consultancy discussed weed control in spring cereals explaining that in his experience the dominance of winter cropping has lead to the development of resistant black-grass especially on heavy soils. “Effective use of stale seedbeds and spring cropping in the rotation could well be an answer to some of the black-grass issues,” he said. “Spring crops need more promoting. There also needs to be more R and D and more pre-emergence herbicides. Spring crops can be very profitable too even at 2.5 tonnes per hectare, input costs are lower and it is better than leaving the land fallow.” Plant Growth Regulators (PGRs), which affect plant growth by altering the growth hormone levels, have played an important role in crop production over the past 50 years. “PGRs don’t lose efficacy so chlormequat, which was first introduced in the 60s, is still the most effective on cereals in terms of reducing crop height and reducing lodging. In fact 87% of wheat grown in 2012 had a PGR,” explained Pete Berry, ADAS. “The benefits of using PGRs are significant, the cost of lodging if PGRs are used in wheat is estimated at £108m. This rises to £196m if no PGRs are used. In oilseed rape things are slightly different as all PGRs are registered fungicides however the cost benefits are similar with the cost of lodging estimated at £64m when PGRs are used compared to £86m when they are not used.” One of the key problems in controlling weeds over the past 50 years has been industrial consolidation, external pressures, regulations and new approaches to discovery. Anne Thompson, Dow AgroSciences took the audience on a trip down memory lane showing how companies had changed. “Back in the 60s there were around 42 US and European research based agchem companies, today there are just six or seven” revealed Anne. “Companies have been removed and generics have increased as products come off patent. In 1962 Rachel Carson wrote “The Silent Spring”, this changed public perception and gave increased attention to the regulation and use of pesticides – but also the fear of pesticides. What people do not consider though is the dose. All things can be poisonous but it is the use of the appropriate dose which permits safe treatment.” “There has been an exponential growth in regulations. The Water Quality Directive has been updated many times but the 0.1 micrograms per litre as a trigger value for water contamination remains unchanged from the 1980s – this is a big hurdle for herbicides. New regulations are on the horizon and these increase the cost and time for developing a new pesticide. The average cost today is over $256million and the time for development from initial discovery is now 10-15 years. We have the techniques, powerful databases, high

throughput screens, virtual screening technologies and genomics – all this is happening but it all depends on the success of the scientist to have the initiative and curiosity to discover. We need to follow the innovation principle – to balance precaution and proportion in regulation and not let precaution stifle innovation. We can meet the challenge of the future if we are allowed,” concluded Anne. Focussing on black-grass, Stephen Moss, Rothamsted Research highlighted that in general £100 per hectare is spent on herbicides but we may only get about 20% control of black-grass. “How do we get out of this mess?” he asked. “It is now accepted that some degree of resistance occurs on virtually all farms on which black-grass herbicides have been used regularly for the last 25 years. Farmers will carry on spraying with e.g. Atlantis, where there is no alternative, even if they are only getting poor control. And, with an ever-increasing trend to drilling in the autumn we are handing it to black-grass on a plate.” “Farmers need to seriously consider nonchemical control methods,” advises Stephen. “Rotational ploughing once every three to six years with good inversion can control blackgrass by some 69%. Delaying drilling will result in lower black-grass populations and give better control from herbicides. Fallowing for two or three years can also give significant reduction of the seedbank. The other key advantage of non-chemical methods is there is no resistance and this may pay long-term dividends. It is important to let the farmer make the decision – preaching can be counterproductive. However, involving farmers in their own simple trials can help them to find out what works on their farm – knowledge without application is wasted.” The final interactive session from Jon Storkey, Rothamsted Research considered future challenges for weed science. “We are facing a rising world population, the need to produce more food from less land, global warming and a decline in available herbicides. We do not have all the weed control answers for the future,” explained Jon. He then continued by asking the audience to vote in response to a series of questions about the future. The audience thought that herbicides were unlikely to be the mainstay of future weed control and a as consequence winter cereal areas would decline. The audience was also prepared to allocate 1-5% or 5-10% of their land to enhance the diversity of farming landscapes. They also thought that there would be a rise in new (invasive) weed species in the next 20years. Finally the majority felt that current funding of research in weed science was inadequate – all food for thought for the future.

December 2013 | Farming Monthly | 47

| Grain

Confident farmers flock to UK Grain Event 2013 A better than expected harvest and an underlying confidence in the future saw farmers turn out in force for the UK Grain Event on Wednesday 6th November. elebrating its seventh successful year UK Grain is Britain’s only event dedicated to the handling, storage and marketing of grain, giving the nation’s arable farmers a timely insight into the sector, all under one roof at Peterborough Arena. Andy Newbold, for event organiser FarmSmart, said: “After last year’s downturn this year’s event saw a renewed enthusiasm for investing in long-term sustainable storage, to enable timely marketing of quality grain.” The exhibition showcased all aspects of grain storage, from monitoring and drying to marketing and pest control. A packed seminar programme included a detailed grain market

update from AHDB analyst Jack Watts, which will be uploaded alongside other seminar presentations onto the FarmSmart website (www.farm-smart.co.uk). “UK Grain has become an important event for everyone in the grain business,” Mr Newbold continued. “It looks at all the issues post-harvest and allows farmers to access the best advice and view the latest equipment to help them deliver grain at the quality and specification to secure the best prices.” HGCA used the event to launch its new Grain Sampling Guide, while innovation was to the fore with a host of new launches from exhibitors, including Bayer, BDC, Danagri 3S, Guttridge, Kentra,

48 | Farming Monthly | December 2013

Martin Lishman, Master Farm Services, Opico and Satake. Seminar speakers included: • Martin Savage of nabim looking at the quality needs of millers; • Dr Ellie Marshall of HGCA reviewing the quality of the 2013 harvest; • David Cross of Rentokil discussing ways to reduce pest risks in grain stores • James Price of Perdiswell

Farm, Oxon, winner of the 2011 NABIM Milling wheat Award, on ‘Grain storage, a farmer’s view on the why’s and why not’s’ Seminar attendees were able to collect 2 NRoSO points and 6 BASIS points. The GrainStorm area allowed visitors to talk one-to-one on specific issues with industry experts – topics ranging from grain quality sampling to identifying storage pests.

www.farmingmonthly.co.uk

| Grain

BDC welcomes customers to Akron and Skandia BDC Systems' Managing Director Andrew Head and other members of the company accompanied a party of UK customers to the Akron and Skandia factories in Sweden during October 2013. he visit was arranged to show customers the manufacturing facilities and the latest product innovations from these two companies that are represented in the UK by BDC Systems. A visit to the Akron factory, where the market leading Svegma brand of grain driers are manufactured, was first on the agenda. It included presentations on Akron's company history and the Svegma range. A tour of the Akron production facilities, fan testing wind tunnel and the impressive warehouse facilities was also included. After an evening's entertainment, the following day was spend at Skandia where, after a corporate presentation, the group was shown around the company's modern production facilities which have seen a £10m investment over the last 10 years. This has included the addition of robotic folding presses, automatic punching machines with 350 storage compartments for raw and finished products. The tour concluded with a look at the three ranges of equipment on show in

www.farmingmonthly.co.uk

the Skandia showroom/ training facility. Two customer site visits were also made. The first was to a large grain co-operative handling over 100,000 tonnes of product per year and where Skandia has installed 150tph conveying equipment. The second visit was to a 2000 tonne farm installation using Skandia 60tph handling equipment. Commenting on the visit, delegate Peter Lee from Mark Weatherhead Ltd said:” The production facilities of both companies were very well organised. We have been dealing with Svegma machinery since the early eighties and together with BDC Systems, they have always been very good at looking after their customers. Skandia is a company that I had last visited some 20 years ago and the way the manufacturing facilities have been developed is extremely impressive. At Mark Weatherhead in Royston we specialise in grain handling and storage, so the visit and the opportunity to see the latest developments from both companies was very worthwhile.”

Long standing BDC Systems' customer Roger Fairs of Tey Farm Systems, was impressed by the investment and development of facilities that has been undertaken by Skandia since his last visit some eight years ago. “It was also clear that BDC Systems has strong links with both Skandia and Akron. As a UK customer, this is very positive. All in all it was a very well organised trip and also presented a good opportunity to meet other delegates from the same industry

as us.” As a UK one stop shop for grain drying, cleaning, storage, handling and ventilation systems, BDC Systems provides more information about its extensive range of products and services at www.bdcsystems.com BDC Systems Ltd, Prospect Farm, Broad Road, Monxton, Andover, Hampshire, SP1 1 7DA. Tel: +44 (0) 1264 710987, Fax: +44 (0) 1264 710987, email: info@bdcsystems.com

December 2013 | Farming Monthly | 49

| Renewables

Low cost, long warranty, Bowled over by award small wind turbine contract secured by UK T company

Earlier this year the John Bowler Group entered the Midlands Family Business Awards and at the awards dinner on 14th November we were delighted to win the prestigious “Business Innovation” title.

A British company has secured an exclusive deal with a US wind turbine manufacturer to provide the UK market with an affordable, low-cost, 10 kW wind turbine.

he Bowler Group was formed in 1980 by John Bowler, and now today all three of John’s children play a part in the business. A few years ago we started to look into ways of reducing the electricity costs on our own farms and offices and we realized we could extend our already successful business to include renewable energy and so in 2010 Bowler Energy was launched.

“Out of our 90-strong workforce, 20 are related to each other in some way so there’s no doubting our family business credentials!” The Business Innovation award recognizes family businesses which have a commitment to innovation. Our entry was based on the strength of our bespoke computer management system which we developed ourselves. It provides everyone in the company

FW, the renewable energy division of DCC PLC, has partnered with Oklahamabased wind manufacturer Bergey to offer a range of UK investors the Excel turbine, a product with a successful 30 year history of providing investors with low maintenance costs and a lower cost-per-unit of energy generated. The turbine comes with a 10 year warranty and an excellent return on investment which could see the cost of investment returned within 6-8 years – well within the warranty period. David Taylor, Business Development Manager at UFW, comments: “The reliability and low maintenance costs of the Excel 10kW wind turbine has already proved its value with 150 installations within the UK and 2,500 across the global market. These numbers speak for themselves. “The renewable energy industry is thriving and, with the variety of products for green energy sources ever-increasing, it’s paramount that people feel secure in their investment. The 10kW product offers customers a 10 year warranty – the longest in its field and with low maintenance costs only requiring an inspection every

with a portal to access up to date information about each of our clients’ renewable energy projects. It is available to our staff online and can be accessed when on site or out of hours, meaning we can keep our clients up to date with their projects at any time. The awards dinner was held at Birmingham University. The Bowler family was represented by Lucie and Harriet Bowler. Out of our 90strong workforce, 20 are related to each other in some way so there’s no doubting our family business credentials!

2 years. “There are stories of some Excel 10s lasting 20 years without maintenance, so there is no question that this is an excellent product. We are delighted to be working with Bergey to offer this to the UK market and look forward to a long and prosperous partnership.” Mike Bergey, President of Bergey Wind Power, commented: “Feed in Tariffs are a key determining factor for those investing in a renewable energy source, and the Excel 10’s low maintenance costs and reasonable initial installation fees make it a highly competitive turbine. “We’re very pleased to be working in partnership with UFW and are impressed with their depth of experience in the renewables market. Their solid business plan for their wind programme and strong background in clean energy technologies makes them an ideal partner and we look forward to working with them installing the Excel 10 across the UK.” For further information on reseller opportunities at EC Wind please contact David.Taylor@ufw.co.uk

50 | Farming Monthly | December 2013

www.farmingmonthly.co.uk

| Renewables

£10m fund launched to finance 100 farm wind turbines as power costs soar A leading supplier of farm-scale turbines has announced a new fund that will finance up to 100 wind turbines on UK farms. emand for the turbines from the farming community has soared in recent months as power costs continue to climb, while deadlines reducing levels of Government incentives draw ever closer. “We have secured over £10m of backing to fund the installation of new super-efficient turbines with no cost to the farmer or landowner,” explained Mark Woodward of Earthmill. “The fund is open to any farmer who has land suitable for turbine installation and has the capability to connect to the National Grid.” He added: “The launch of the fund eliminates any financial risk to the landowner. Everyone still has the option to buy a turbine outright and we will install and connect it to the Grid, but this opens up green energy as a revenue stream to many farmers who previously chose not to invest in the technology. The installation of a ‘small-scale’ wind turbine can reduce the farm’s electricity bill by

as much as £40,000 per annum for high energy users as well as provide a rental income for 20 years. “Previously some farmers didn’t want to borrow money for wind projects, or were unable to secure the loans required and as a result were missing out on significant revenues from power generation as well as discounted energy for consumption on their farms. Rapidly increasing energy bills are a major issue for many farmers and this initiative will greatly help to protect them from this problem.” Mr Woodward emphasised that many farmers can generate significant levels of power for their own use, with any extra being fed into the grid. The fund will cover all the project costs from the early stages of securing planning, through to upgrading the farm’s electrical supply if required. Provided the farmer owns the land, or in exceptional cases has a long lease, the fund will undertake all

ground and building works required to install the turbines that can typically generate enough power for 150 homes. There are currently over 500 live applications by farmers to install individual or twin farm-scale turbines on UK farm land. This latest boost for the industry will enable more farmers to enter the energy market, bolstering dwindling farm revenues and reducing sky-rocketing energy bills. Poultry, pig and dairy farmers, who typically consume the most power, stand to make the most

Dairy farm milks savings from solar A Devon dairy farm is milking healthy energy savings after having a large solar panel system fitted onto a barn roof. eeves and Partner dairy farm in Kingsbridge had 100 solar panels fitted by Exeter renewable energy firm Solarlec. The day-to-day running of the farm requires a huge amount of energy - the milking parlour features a large compressor used to make ice to chill milk and an industrial boiler heats water to clean the parlour - so farmer David Reeves was keen to investigate ways to stay ahead of the game and take control of escalating energy costs. David said: "Solarlec were fantastic and the installation ran smoothly - they even suggested a few small tweaks we could apply to make the most of the solar electric during daylight hours and it's made a huge difference." David monitors the productivity of his system using two inverters which have been installed inside the barn. He said: "I come in here most mornings on my way to fetch the cows in as it's becoming light - I have a look at how many units we produced the previous day. It's interesting to have an idea throughout the day of how much electricity you're turning out and what you can use at the other end."

www.farmingmonthly.co.uk

from the scheme. The revenues farmers can earn from the Government’s Feed in Tariff scheme fall in April 2014 as incentives are reduced. Rising electricity costs and meagre farm revenues are, however, driving a steady increase in demand for new turbines that will continue throughout 2014. Full details of the fund can be found at the Earthmill website or at www.earthmill.co.uk

"I chose a large system because even during the winter months when we experience fewer hours of daylight I'll still have plenty of power to keep the farm running smoothly. I believe anyone with a bit of spare roof space ought to put some panels up there." The solar panel system is set to save the farm £51,826 in electricity bills over the next 25 years, with £91,224 to be fed back into the business over the same period through the government's feed-in tariff subsidy scheme. David's system was funded through the Nationwide Corporate Financing Scheme one of many finance options available to business and domestic customers from Solarlec. Ged Rowbottom from Solarlec said: "Finance options like the Nationwide Corporate Financing Scheme give our business customers an affordable alternative to an outright cash investment and mean green investments are no longer subject to capital budget restrictions." For more information on renewable energy, visit www.solarlec.com .

December 2013 | Farming Monthly | 51

| Renewables

Bucks accountants urge farmers to explore new loan fund to turn farm waste to energy Buckinghamshire-based chartered accountants The Fish Partnership are urging farmers to explore a new government fund aimed at turning farm waste into energy. nder a new government scheme, farmers will be able to obtain funding to set up small anaerobic digestion (AD) plants. The technology turns waste into energy, reduces greenhouse gas emissions and produces a

renewable source of bio-fertiliser. Announced by the Environment Secretary Owen Paterson, the £3 million initiative will allow farmers to apply for up to £400,000 from the AD loan fund to help them finance on-site AD technology. Paul Laird, partner at High

CLA lobbying triggers AD review CLA lobbying has led to a Government review of Feedin Tariffs for small-scale anaerobic digestion (AD). he CLA, working with industry partners, has managed to persuade Energy Minister Greg Barker to announce a review, which will start in January next year. CLA President Henry Robinson said: “We welcome Mr Barker’s move which could lead

to better incentives for land managers wanting to get involved in anaerobic digestion. “This is an important step for the industry which may pave the way to more AD on farms, benefiting agriculture and the environment.”

52 | Farming Monthly | December 2013

Wycombe-based The Fish Partnership: “This new fund is a major boost to farmers who have otherwise struggled to get finance to set up a small scale AD plant. “This new initiative will allow farmers to apply for a loan for up to 50 per cent of the cost, and is something we would encourage farmers to explore. “Any new finance initiative for farmers should always be welcomed, particularly if it can help alleviate the massive energy bills our farmers and businesses are currently facing.” In announcing the launch of the scheme Mr Paterson said: “Dealing with waste and recycling properly is good for the environment and can boost economic growth and create jobs. “This funding provides an opportunity for farmers across the country to consider whether AD technology is right for their farms, in order to cut waste, reduce greenhouse gas emissions and recycle valuable nutrients

Paul Laird

back to the land.” The fund, which will be administered by WRAP, is split into two phases. Farmers can apply for funding to develop a business case to find out if anaerobic digestion is the right solution for them in dealing with waste. They can then apply for a loan of up to £400,000 to fund up to 50 per cent of the overall costs of the AD plant. For more information on how to apply for the fund, contact The Fish Partnership on 01628 527956 or email post@fishpartnership.co.uk

www.farmingmonthly.co.uk

| Agritechnica

www.farmingmonthly.co.uk

December 2013 | Farming Monthly | 53

| Pests

Protect your farm from Pest mammals rodents this Winter with Spaldings A

Although pest mammals such as moles and rabbits may not be an immediate cause a public health risk, they can still cause devastating damage in an agricultural environment.

Take care of your problem pest with Lodi products at Spaldings.

ats on farms are major pests that if not dealt with quickly can soon become a large infestation. On top of the usual domestic annoyances such as gnawing cables and wood they can pose a more serious problem that ends up costing the farmer by their eating, destroying and contamination of grain, seed and produce. This makes it extremely important to take the proper precautions and if too late use an effective treatment plan. Rats have been found to be neophobic, meaning they do not like it when anything new is added to their environment. They are creatures of habit and like to run the same routes daily. That’s why it’s a good idea to leave out bait stations all year round and just fill them up with bait once the rats have become a problem. This way you save yourself weeks whilst everyone else has to wait for the rats to become familiar with the station before they even consider consuming the poison within.

“If there is fresh grain and seed present care must be taken to ensure the bait seems more attractive than the fresh options” “Throughout the years rats are slowly becoming immune to more and more of the baits on offer. We at Spaldings therefore believe it is paramount to ensure that you are picking the best quality option as well as carrying out your extermination plan in the most effective way possible,” says Roger Chase, Sales Director for Spaldings. “To help our customers achieve this we have developed a wide range of pest control options to maximize their control.” Rodents can be incredibly hard to exterminate, their eating habits mean they often will eat a small quantity of something then wait to

observe its effects before continuing. That means it has to be decided whether to give them a high dose straight away like a single feed bait or else bait with a delayed effect such as an anticoagulant in order to be effective. That’s why Spaldings offer a range of the above in several different formulations. Rodents can have their own preference for baits. For example if there is fresh grain and seed present care must be taken to ensure the bait seems more attractive than the fresh options. Wax blocks have been found to be more useful in damp conditions whereas pasta baits are more popular throughout the winter. “No matter the situation one of our bait solutions can help,” says Chase. “The Spaldings range contains a mixture of solutions for indoor and outdoor use with tasty and high quality ingredients to ensure that no matter the circumstances one of our options can do the job.” Spaldings also have a wide range of pest control including of kites, gas guns, mouse and fly baits, traps, baiting stations and rockets to help keep your farm free of pests this year. For details of these and other products supplied by Spaldings, contact 01522 507 600 or from Republic of Ireland 1800 255 455, email: agsales@spaldings.co.uk or view the catalogue at www.spaldings.co.uk

54 | Farming Monthly | December 2013

good example of a pest that fits this scenario is the Mole. The soil from molehills in grass silage for example can result in spoilt and unpalatable silage, and can possibly be a source of Listeriosis in sheep. In many areas silage is already in short supply, so any pest that can contribute to it spoiling must be controlled. Moles will also damage crop meant for consumption by humans as well as by animals. Where moles burrow under arable crops they can damage seedling and plants, resulting in wilting and death. Rabbits too can cause issues for farmers. Rabbits will eat a wide range of herbage, but will select more nutritious growth. This results in them automatically being attracted to agricultural crops as they tend to be more nutritious and will be plentiful when planted. This can result in serious economic loss for farmers and growers, and yield losses can be substantial where rabbit activity goes unchecked. Rabbits can also cause extreme damage with their burrow systems. Rabbit digging will undermine

embankments and even structures, causing collapse. New and even established plants and trees can be affected as rabbits tend to damage the leading shoots and strip bark. Even if rabbits are not causing issues on your land and live on your property, you still have a legal obligation under the PestAct 1954 to control them or prevent them accessing your neighbours land if they start to cause issues on their property. It is widely accepted by farming organisations that poor weather conditions will have a detrimental effect on farming yields and economic returns. Poor weather also forces pests like rats and mice to seek shelter and new food sources, often within your farm buildings. In such situations, it is essential that we do not ignore the pest species that can compound this situation even further by damaging the remaining crop and silage that farmers have access to. If you need help or support to protect your yields, ensure that you use a professional to make sure that pest control measures are suitable, cost effective, and ultimately, legal.

www.farmingmonthly.co.uk

| Machinery

Contact an accredited pest controller in your area

LONDON Predator Pest Solutions Ltd 41 Oldfields Rd, Sutton, Greater London SM1 2NB T: 0800 112 3480 M: 07504 605306 E: info@predatorpestsolutions.co.uk W: www.predatorpestsolutions.co.uk “Pest control without a sting in the tail!”

LINCOLNSHIRE Aveland Pest Solutions Ltd Brierley Cottage Stables, Sempringham, Sleaford, Lincolnshire NG34 0LU T: 01529 241159 M: 07889 403538 E: pests@avelandsolutions.co.uk W: www.avelandpestsolutions.co.uk “Integrated pest management for a healthier environment”

www.farmingmonthly.co.uk

SHROPSHIRE Severn Pest Control 12 Rowton Road, Shrewsbury SY2 6JE, T: 01743 617247 M: 07773 355334 W: www.severnpestcontrol.co.uk “Deer management, rabbits, moles, fox, rodents, insects”

EAST ANGLIA Command Pest Control Church Lane, Preston St Mary, Sudbury, Suffolk CO10 9NQ T: 01787 248049 E: sales@commandpestcontrol.co.uk W: www.commandpestcontro;.co.uk “Quality without compromise since 1986”

CAMBRIDGESHIRE DRE Pest Control 19 Wallmans Lane, Swavesey, Cambridge, Cambridgeshire CB24 4QY T: 01954 230708 M: 07836 245670 E: info@drepestcontrol.co.uk W: www.drepestcontrol.co.uk “A local family company since 1974”

December 2013 | Farming Monthly | 55

| Machinery

AXION 800 wins awards for "Tractor of the Year 2014" and "Machine of the Year 2014" The CLAAS AXION 800 was the recipient of two awards at the AGRITECHNICA 2013 trade fair in Hannover â&#x20AC;&#x201C; "Tractor of the Year 2014" and "Machine of the Year 2014".

he prestigious international "Tractor of the Year" prize is awarded every year by an independent jury of selected agricultural trade journalists. This year, having evaluated the best tractors on the market the 23-person jury awarded the most coveted "Tractor of the Year 2014" award to the CLAAS AXION 850. "Receiving this award is a very special moment for us", stated Jan-Hendrik Mohr, Managing Director of Sales Division of CLAAS GLOBAL SALES GmbH, who accepted the award on behalf of the company. "The award is actually extra special because we are currently celebrating 10 years of CLAAS Tractor as well as our 100-year company anniversary." The "Machine of the Year" award is presented every two years by the technology editors of the Deutscher Landwirtschaftsverlag

56 | Farming Monthly | December 2013

(dlv) publishing house for the best innovations in agricultural technology. The prize in the large tractor category was this year awarded to CLAAS with its AXION 800 CMATIC. Explaining its decision, the jury stated: "The stepless transmission is operated using the CMOTION operating lever, which is one of the most ergonomic controls on the market. The CEBIS control terminal also allows the operator to make extensive adjustments. We particularly liked the simple engine/transmission management system. The easily adjusted engine torque function for various types of operation lowers fuel consumption and increases economic efficiency". The new AXION 800 was launched in February at the SIMA trade fair in Paris and the first machines equipped with the HEXASHIFT transmission are now also going on sale. The

range was extended with the launch of the new stepless transmission version of the AXION 800 CMATIC at the Agritechnica 2013 trade fair. The AXION 850 is the most powerful in the four model range which offer power outputs from 158/215 kW/hp to 194/264 kW/hp (as per ECE R 120). With the AXION 800 winning both the "Tractor of the Year 2014" and the "Machine of the Year 2014" awards, this confirms that CLAAS is following the right concept in its tractor division, which has a strong focus on economy, efficiency and comfort. The success of the concept was also underlined by the latest DLG Powermix Test in which the AXION 850 achieved the best test result out of all tractors in the 200 - 270 hp class with a result of 248 g/kWh.

www.farmingmonthly.co.uk

| Machinery

Manitou Group celebrates 40 years of Gehl Skid Loader In 1973, Gehl Company (today Manitou Americas Inc.), a leading manufacturer of compact earthmoving and material handling equipment, began designing and manufacturing its own line of skid steer loaders. Working closely with their customers, the line has constantly evolved over the last 40 years. Today, a complete line of seven radial and three vertical lift models, are offered under the Gehl brand name. he Gehl range of skid steer loaders is specifically designed for the agricultural markets. “Look for Gehl branded skid loaders to deliver new customer focused models without abandoning our heritage which began in the agriculture industry in 1859” reflects Brian Rabe, Manager of Product Development Manitou Americas, Inc. “This measured approach has worked for Gehl skid loaders for 40 years, and for the Gehl brand for over 150 years. You can’t argue with history.” Whatever the job, Gehl have a skid steer available to make a real difference in keeping farm yards tidy, with the ultra compact dimensions of the Gehl skid steer loaders providing the full capability to access confined buildings for distribution of straw bedding and mucking out. Handling palletised feedstuffs and fertilizer into restricted storage areas is another benefit of the Gehl machines . The Gehl skid steer range consist of 10 models, from the ultra compact SL 1640E with a rated operating load of 386kg to the latest V 400 Vertical lift model with a rated operating

www.farmingmonthly.co.uk

load of 1814kg. Designed to work in very confined spaces, the Gehl skid steer is available with a choice of operator friendly controls. The cab is spacious and provides excellent levels of comfort for increased productivity. The ROPS/FOPS structure pivots back allowing easy access for maintenance work and the swing open rear door and flip up engine cover fully expose the service points to the engine compartment. The legendary ability of all skid steer makes to ‘spin on the spot’ is what gives the concept such unrivalled productivity in confined spaces but the Gehl skid steers enjoy more reach and lift height and operating capacity in reserve than most other brands The front end attachments further enhance the versatility of the Gehl skid steer and the high horsepower and responsive hydraulic systems give the required pressure and flow to power a wide selection of attachments. These machines are super-compact and tough “ little giants” which bring exceptional power and hydraulic performance to small spaces, providing users the edge in

productivity and profitablility. Despite this they still offer spacious cabs and a choice of controls, the E – Series Skid Loaders keep operators comfortable all day long. The Gehl brand in the UK and Ireland is supported by a dedicated dealer network which specialise in materials handling.

December 2013 | Farming Monthly | 57

| ATV

Suzuki ATV celebrate growth in market share at 2013 Dealer Conference Suzuki GB’s ATV Division and its network of dealers recently converged on Wyboston Lakes Conference Centre for its annual Dealer Conference.

he event took place on the 13th and 14th November and was an opportunity for Suzuki to review its successful activities during 2013. Suzuki ATV’s Sales and Marketing Manager Gareth Lumsdaine, took the opportunity to break the exciting news to the ATV dealer network, that thanks to their hard work, market share had grown in excess of 2% year to date, in comparison to the same period in 2012. Giving Suzuki their highest market share in over 10 years. The conference was also a great chance to brief the dealer network on some of the exciting strategies and plans to help grow the market share even further in 2014. The event was held jointly with Suzuki’s Marine Division and included a series of presentations and workshops from all areas of Suzuki’s business including; sales, aftersales, finance, technical and digital marketing as well as giving the dealers an opportunity to take part in product evaluation activities. The product evaluations gave dealers the opportunity to compare the Suzuki ATV range against competitor models in a hands-on environment, highlighting the high level of confidence held in Suzuki’s ATVs. With Suzuki staff available to

provide detailed information on the features and benefits of the Suzuki ATVs. The main part of the conference concluded with a black tie Gala dinner at which awards were presented to some of Suzuki’s most successful dealers. Powys based ET James & Sons won the Southern dealer of the year and Northern dealer of the year went to Yorkshire’s DH Wadsworth & Sons thanks to the hard work and continuous success of both dealerships. The Aftersales dealer of the year for 2013 went to H. Pigney & Son to provide recognition for the high levels of aftersales service that the ATV dealership continues to provide. Speaking after the event, Gareth said, “We are very grateful to those dealers that took time out of their businesses to attend our conference. The support and commitment of our dealers is integral to the success of Suzuki’s business and it was fantastic to get everyone together to say thank you to them and to continue to fuel their passion for both our products and our brand going forward. The event was a great success and we have already had some really positive feedback.”

58 | Farming Monthly | December 2013

www.farmingmonthly.co.uk

| Motors

Biker Warehouse London Road Bicester Oxfordshire OX26 6HG Tel: 0845 2692269 www.bikerwarehouse.co.uk

158 Performance Limited Unit 1/2 Tallington Services, Main Road, Tallington Lincolnshire PE9 4RN Tel. 01778 341144 www.158performance.co.uk

Extreme Quads Unit 5 Fleet Road Ind. Est. Holbeach Lincolnshire PE12 8LY Tel: 01406 420002 www.extremequads.co.uk

Andrews of Hindhead Limited The Garden Machine Centre Portsmouth Road, Hindhead Surry GU26 6AL Tel. 01428 605544 www.andrewsofhindheadltd.co.uk

www.farmingmonthly.co.uk

Quad Zone Mill Cottage, Clows Top Nr Kidderminster Worcestershire DY14 9HP Tel: 01299 832699 www.quadzone.co.uk

December 2013 | Farming Monthly | 59

| Motors

Don’t slip & slide this Winter - thanks to SsangYong The cold weather is always a hot topic at this time of year, and as winter approaches the debate over which tyres to fit warms up. hether driving in wet, icy or snowy conditions, the benefits of having the right tyres on your car is proven in test after test, which is why SsangYong fits mud & snow tyres to its cars. Every Korando crossover, Korando Sports pick-up and Rexton W* is equipped with high specification mud & snow tyres to give optimum grip regardless of the weather or road conditions. SsangYong equips these cars with leading Korean manufactured tyres which have been specifically developed for premium crossover/SUV vehicles. These are contemporary all-season tyres whose durable construction and tread pattern ensure high levels of wet and dry weather traction and ride comfort, as well as good wear performance. Every car in the SsangYong range is available with four wheel drive The Korando SX, CSX commercial and EX feature a Torque on Demand four-wheel drive system which constantly monitors the level of grip available and distributes power to the wheels that need it most. Under normal driving conditions the

engine’s torque is directed to the front wheels so the car runs with the efficiency of a family hatchback. However, if the front tyres begin to lose traction, power is automatically fed to the rear

wheels to ensure safe, stable and dependable progress is maintained with grip from all four wheels. An all-wheel drive lock mode is also provided to ensure a 50/50 spread of torque between the front and rear wheels at speeds up to 25mph, essential for when low speed traction and control is needed. The Korando Sports pick-up, Rexton W* and Turismo EX are equipped with a switchable fourwheel drive system to ensure excellent off road capability, and also feature a low ratio transfer box to deal with the most extreme loads, inclines and surfaces. Perfect for both towing and tackling wintry conditions, the 4x4 system utilises SsangYong’s years of experience to deliver the ultimate traction whatever the conditions. *Note - Rexton W is available to order now and at dealers from midDecember Storming autumn savings on Korando still available SsangYong’s special autumn offers continue on selected Korando crossover models for a few more weeks. Large savings across the range start with £1,450 on the EX manual, £2,000 off an LE and up to £3,000 off the top of the range EX automatic. 5 year limitless mileage warranty All models in the SsangYong range are covered by a best in class 5 year limitless mileage warranty. Designed to be totally transparent and give customers

60 | Farming Monthly | December 2013

complete peace of mind, ‘limitless’ means just that: not a maximum mileage condition that some brands impose in their small print. All the major mechanical components are covered including wheel bearings, suspension joints and bushes, steering joints, shock absorbers and even the audio system. Wearable components such as clutch discs and brake friction materials which could have their life reduced by poor driving are covered for one year or 12,000 miles, and the battery and paintwork for three years. SsangYong’s top tips for driving this winter Visibility - keep your windows clean and clear inside and out. Demist thoroughly. Defrost any ice from all windows and remove any accumulation of snow from the roof and bonnet before setting off Tyres - make sure your car is fitted with the right tyres, they have ample tread depth and are correctly inflated Lights - keep your lights clean and replace any faulty bulbs immediately Number plates - keep clean and clear of snow to ensure maximum reflection in the dark Speed - reduce your speed especially when dark, driving through puddles and when the temperature drops below 4 degrees celsius Distance - increase the braking distance between you and the car in front when it’s wet or icy Further information is available from: www.ssangyonggb.co.uk

www.farmingmonthly.co.uk

| Motors

www.farmingmonthly.co.uk

December 2013 | Farming Monthly | 61

| Motors

Jaguar Land Rover celebrates 1,000,000 vehicles built at Halewood Operations

1,000,000 vehicles built at Halewood since 2001

Jaguar Land Rover is celebrating the production of the 1,000,000th Jaguar Land Rover vehicle at its Halewood advanced manufacturing facility, near Liverpool, last month. he 1,000,000 vehicle is a unique Range Rover Evoque, painted in a special one-off colour combination and will be donated to Cancer Research UK. The vehicle is a Fuji-White, Dynamic with ebony-black alloy wheels and distinctive and unique Firenze-Red contrast roof, matching Firenze-Red mirror scalps and red/black sports seats and interior door panels. Global demand for Range Rover Evoque has exceeded expectations with 18,000 advanced orders before job 1 on 4 July 2011. With continued demand for Evoque and growing sales of Land Rover Freelander 2, this production milestone was achieved earlier than predicted. Production volume at Halewood has increased significantly over the past 12 months due to 24 hour working, bringing the arrival of the 1,000,000 vehicle ahead of original forecasts. Between 2001 and 2009, 363,603 Jaguar XType and X-Type Estates were manufactured at Halewood. The Jaguar X-Type was Jaguar's best-selling model during much of its production run and was Jaguar's first compact executive car for 50 years. In 2002, the Jaguar X-Type Diesel 2.0 was launched and made history for the company as Jaguar’s first ever diesel model. Also in 2002 the Jaguar X-Type Estate was launched, again making history as Jaguar’s first ever estate vehicle. In 2003 the X-Type achieved best in class Paint Appearance in the JD Power US survey, a hotly contended and sought after prize, which was retained in 2004 and again in 2006. In 2005 Halewood celebrated another significant manufacturing award, this time with the JD Power European Gold Plant Award in Recognition of X-Type’s excellent quality. In

2006 the 2.2 Diesel was launched and in December 2009 the last Jaguar X-Type drove off the line at Halewood. In 2005 manufacturing preparation works commenced, following significant investment by Land Rover, for the production of the all new Land Rover Freelander 2. On 25 October 2006 the Land Rover Freelander 2 Job 1 drove off the production line and was welcomed into the world by Premier League footballers from Liverpool Football Club. In May 2012 Halewood celebrated the 300,000 production milestone. The global demand for Freelander 2 continues today and it has been one of Land Rover's most popular models with 381,211 being manufactured to date. In July 2011 Halewood, and the world, welcomed the arrival of the Range Rover Evoque. The smallest, most efficient production Range Rover ever made. When the Evoque started life it had already generated an exceptional market response with more than 18,000 advance orders from customers worldwide. Waiting lists for the car peaked at 12 months for some markets during the second half of 2011. As a result of this demand, Halewood Operations moved to 24 hour production for the first time in its 50 year history. The Evoque has received over 130 global awards and is the biggest selling Jaguar Land Rover vehicle, breaking Jaguar Land Rover production volume records in both of its first two years of production. Halewood has manufactured 255,186 to date. Richard Else, Operations Director, Halewood, said: “We are delighted to be celebrating this huge milestone for Halewood. This unique Evoque looks stunning and is a one-off vehicle that will raise money for Cancer

Research UK projects here in the North West.” “Over the past few years many of the families of my growing team have been impacted by various forms of cancer. This milestone vehicle, built with pride at Halewood, will help raise much needed funds to help eradicate this dreadful disease.” The 1,000,000th vehicle will be donated to Cancer Research UK, who will take ownership of the vehicle later in the year. The CRUK team will be placing the car in a special auction event in 2014. Details of the event will be revealed in the new year and funds raised from the vehicle will then be spent on CRUK projects in the North West of England. Cancer Research UK funds world-class research and clinical trials throughout the North West and last year spent nearly £21 million supporting the work of doctors, nurses and scientists at hospitals and major universities in the region. Every hour more than four people in the North West are diagnosed with cancer. Head of Volunteer Fundraising at Cancer Research UK, Simon O’Leary, said: “We are incredibly grateful to Jaguar Land Rover for thinking of us and making such a generous gift. Cancer Research UK receives no government funding for its life-saving research, so every step we make towards beating cancer relies on every pound donated. The money raised by the auction of the car will make a real difference in the fight against cancer.”

Research shows that friction is accountable for 20% of engine’s CO2 emissions Oil developer offers automotive industry alternative methods to decrease friction without reducing viscosity. t a recent conference in Brussels, specialist oil developer and producer Millers Oils warned of the dangers of relying upon simply reducing oil viscosity to help meet increasingly stringent emissions targets. Concurrent oil and driveline development can optimise the efficiency of current technologies, and enable the evolution of a new generation of low emissions vehicles that benefit from increased durability and reliability. “Innovative oil development is able to provide solutions to a number of challenges currently posed by recent trends in drivetrain advancement,” says Martyn Mann, Millers Oils Technical Director. “Compatibility with changing, sensitive emissions technologies, smaller sump capacity, fewer and smaller crank

62 | Farming Monthly | December 2013

bearings, high specific power output and increased low speed torque loads are just some of the areas that traditional oils struggle to address efficiently. The expectation of increased service intervals, hybrid drives and aggressive thermal environments necessitates thorough lubrication development, and manufacturers must resist the temptation of reducing oil viscosity.” The broad challenge faced by oil developers is to reduce friction while increasing durability, as downsized engines and alternative powertrains place increasing strain on traditional lubricants. Millers Oils’ new Nanodrive range utilises nanotechnology to address these concerns by increasing film strength of the oil, reducing parasitic losses to improve power and torque while reducing fuel

Martyn Mann, Millers Oils technical director

consumption. “Twenty per cent of an engine’s CO2 emissions arise through friction, and more energy is lost through friction than is delivered to the wheels,” says Nevil Hall, Millers Oils Joint Managing Director. “The important focus is to ensure that oil technology is carefully considered as vehicle manufacturers continue to develop efficient drivetrains. Advanced lubrication technology can not only support the work of OEMs to deliver reliable downsized engines and alternative powertrain, but optimise the potential gains of these continually developing technologies.”

www.farmingmonthly.co.uk

| Motors

Unity Automotive Cambridgeshire 01733 893704 unityautomotive.co.uk

Cross Roads Warwickshire 01608 661544 unityautomotive.co.uk

Maple Garage Ltd East Yorkshire 01964 670392 www.maplegarage.co.uk

Shukers Isuzu (Shrewsbury) Shropshire 01743 873900 www.shukersisuzu.co.uk

Tallis Amos Group Leominster Herefordshire 01568 613434 www.herefordshireisuzu.co.uk

Carstins West Midlands 01676 533145 unityautomotive.co.uk

R. Hunt Isuzu Hampshire 01264 860532 www.rhunt.co.uk

Jeffries of Bacton Suffolk 01449 781087 www.jeffriesofbacton.co.uk

Duckworth Isuzu Boston 01205 725700 www.duckworthisuzu.co.uk

Hammonds of Halesworth Suffolk 01986 834090 www.hammondgroup.co.uk

Duckworth Isuzu Market Rasen 01673 841410 www.duckworthisuzu.co.uk

Ashburton Motor Works Devon 01364 652302 devon-isuzu.co.uk

Garland Motors Ltd Hampshire 01252 367373 www.garlandskoda.co.uk/isuzu

Tallis Amos Group Bibury Gloucestershire 01285 740115 tallisamosgroup.co.uk

Bob Gerard Limited Leicestershire 01162 592224 www.bobgerard.co.uk

Bulldog Twyford Berkshire 0118 9321 331 bulldogtwyford.com

York Van Centre North Yorkshire 01904 470170 www.yorkvancentre.co.uk

Isuzu North London Middlesex 0208 804 6135 www.isuzunorthlondon.com

www.farmingmonthly.co.uk

December 2013 | Farming Monthly | 71

| Motors

Drive away an Amarok from ÂŁ279 a month.* 1RZ ZLWK D É&#x153; 36 HQJLQH EHVW LQ FODVV FDUJR DUHD RI P DQG LPSUHVVLYH RII-URDG SHUIRUPDQFH WKDQNV WR VHOHFWDEOH 027,21ÂŽ IRXU-ZKHHO GULYH $OVR DYDLODEOH ZLWK DQ RSWLRQDO É&#x153; 36 HQJLQH 3RS LQ DQG DVN XV IRU PRUH GHWDLOV

*Plus VAT and initial rental. Available on contract hire or finance lease terms. Business users only. 6p per mile (plus VAT) charged for mileage travelled in excess of the contracted mileage. Contract hire quotation based on Amarok Startline 2.0 TDI 140PS. Offer based on a 3 + 35 payment profile and 10,000 miles per annum. Further charges may be payable when the vehicle is returned. Indemnities may be required.

64 | Farming Monthly | December 2013

www.farmingmonthly.co.uk

| Motors

Abridge Van Centre Apple Yard, Langston Road, Loughton, Essex. Telephone: 020 8045 6006. Find us on your sat-nav using IG10 3TQ. www.volkswagen-vans.co.uk/abridge

Greenhous Volkswagen Van Centre (Bilston) Trinity Road, Bilston, Wolverhampton. Telephone: 01902 546 561. Find us on your sat-nav using WV14 7EF. www.volkswagen-vans.co.uk/bilston

Alan Day Van Centre Pinkham Way, North Circular Road, New Southgate, London. Telephone: 020 8920 4000.

Find us on your sat-nav using N11 3UT.

JCT600 Van Centre (Hull)

Sinclair Van Centre Gorseinon Road, Penllergaer, Gorseinon, Swansea, West Glamorgan. Telephone: 01792 447 578. Find us on your sat-nav using SA4 9GW. www.volkswagen-vans.co.uk/sinclair

Sinclair Van Centre (Cardiff)

Saxon Way, Priory Park West, Hessle, Hull, East Yorkshire. Telephone: 01482 908 520.

Tyndall Street, Wharf Road East, Cardiff. Telephone: 02921 150 093.

Find us on your sat-nav using HU13 9PB.

Find us on your sat-nav using CF10 4BB.

www.volkswagen-vans.co.uk/JCT600Hull

www.volkswagen-vans.co.uk/cardiff

JCT600 Van Centre (York)

Volkswagen Van Centre (Peterborough)

www.volkswagen-vans.co.uk/alandaynewsouthgate

Breeze Van Centre (Poole) Yarrow Road, Tower Park, Poole, Dorset. Telephone: 01202 900 304.

Centurion Park, Clifton Moor, York. Telephone: 01904 848 302.

Find us on your sat-nav using BH12 4QY.

Find us on your sat-nav using YO30 4WW.

www.volkswagen-vans.co.uk/breezepoole

www.volkswagen-vans.co.uk/JCT600York

Greenhous Volkswagen Van Centre

JCT600 Van Centre (Sheffield)

Ennerdale Road, Harlescott, Shrewsbury, Shropshire. Telephone: 01743 600 031.

Find us on your sat-nav using S9 1XS.

Storeys Bar Road, Peterborough, Cambridgeshire. Telephone: 01733 615 052. Find us on your sat-nav using PE1 5YS. www.volkswagen-vans.co.uk/peterborough

Europa Close, Europa Link, Sheffield, South Yorkshire. Telephone: 01144 040 023. www.volkswagen-vans.co.uk/jct600sheffield

Find us on your sat-nav using SY1 3TL. www.volkswagen-vans.co.uk/greenhous

JCT600 Van Centre (Newark ) 2 Northern Road, Newark, Nottinghamshire. Telephone: 0844 811 2415. Find us on your sat-nav using NG24 2ET. www.volkswagen-vans.co.uk/jct600newark

Subject to status. Available to over 18s in the UK only. Available for all Amarok ordered by December 20th, 2013 and is not available in conjunction with any other offers. Finance providers may pay us for introducing you to them. This offer may be varied or withdrawn at any time. Volkswagen Commercial Vehicle Finance, Freepost VWFS.

www.farmingmonthly.co.uk

December 2013 | Farming Monthly | 65

| Motors

New Forester named ‘Mid Range SUV Of The Year’ Subaru UK’s best-selling model, the Subaru Forester, has been named ‘Mid Range SUV of the Year’ by 4x4 Magazine. ubjecting the new Forester to a wide range of tests both on- and off-road, 4x4 Magazine awarded the Forester with class honours in one of the hardest-fought categories in its annual ‘4x4 of the Year’ issue. Commenting on the Forester’s victory, Nigel Fryatt, Editor of 4x4 Magazine, said: “Subaru's latest Forester impressed us both on and off road. This version is fresh, good-looking and a great drive. It has 'good for its class' approach and departure angles and with the automatically controlled X-Mode system, the Forester maintains its competent off-road ability and bad weather credentials. That it is also great to drive on the road is the bonus that grabbed the class victory.”

The all-new Forester went on sale in the UK in May and builds on the model’s established reputation as a tough, likeable and highly capable SUV. At the same time, the new Forester offers improved performance, safety and efficiency and a more spacious and better appointed cabin. Sales of the Forester are up 75% year on year against 2012. The petrol turbo XT has been in particularly high demand among the Subaru faithful - bucking the trend for strong diesel SUV sales – with its 240ps 2.0-litre turbocharged direct-injection petrol engine and clever X-Mode hill descent system. The new model is also available with Subaru’s latest 2.0litre petrol and diesel Boxer engines, with all

versions featuring Subaru’s trademark symmetrical All-wheel drive as standard. Paul Tunnicliffe, Managing Director of Subaru UK, commented: “We are delighted with this recognition. The Forester has always been popular with owners who need a car that is highly accomplished off-road but also entertaining on it, and the decision by 4x4 Magazine’s expert judges is testament to the car’s varied abilities. Customers should also take comfort from our enviable reputation for reliability and durability, five-year, 100,000-mile warranty and rock-solid safety credentials.” To find out more about the Subaru Forester, visit www.subaru.co.uk, or read the full 4x4 Magazine report.

S-Cross: The all-new crossover from Suzuki Suzuki has some good news this winter for customers looking to purchase a new SX4 SCross, the brand’s all new Crossover model. aunched in October, the SX4 S-Cross is available from £14,999 for the SZ3 1.6-litre petrol model with manual transmission and Suzuki is offering some very competitive PCP (Personal Contract Plan) and PCH (Personal Contract Hire) rates to help new car buyers looking for the best payment option to suit them. Taking the SZ3 model as an example with its high standard specification of seven airbags, cruise control with speed limiter, air conditioning, 16-inch alloy wheels and Daytime Running Lights, Suzuki is offering a low rate PCP of 4.9 per cent APR over a 43 month period until the end of this year with payments of just £189 per month. Move up the range to the SZ4 with Dual Zone automatic air conditioning, Bluetooth

connectivity, front fog lamps and rear privacy glass as standard and payments are just £10 per month extra over the same term. Retained value is positive too as established Trade publication Glass’s Guide has listed an average residual value across the S-Cross range of 41 per cent after three years and 60,000 miles. Lower mileage owners can be ensured of an even higher retained figure when it comes to replacing the car. Personal Contract Hire is always a good option for Business Users and Suzuki Financial Services is offering a headline low rate plan of £179 per month for the SZ-T model over 42 months with a deposit of six monthly payments required. SZ-T is an ideal choice as it offers an even higher standard specification including Satellite navigation, DAB radio, rear

66 | Farming Monthly | December 2013

parking camera and polished 17inch alloy wheels. With regards to safety, SX4 SCross is one of the best new cars on the market after the recent NCAP tests with five stars awarded overall and strong scores of 92 per cent for Adult occupancy protection, 80 per cent for Child occupancy protection and 72 per cent for Pedestrian protection which was the highest score amongst any current competitor Crossover. It is an ideal choice for families as it offers seating for five, luggage capacity of 430 litres and a low cost of ownership with CO2 emissions of 127g/km 1.6-litre petrol (manual transmission) and just 110g/km for the 1.6-litre DDiS model. Real World fuel economy has been commented as ‘exceptional’ by several of the Automotive

magazines with this week’s Auto Express voting it second place in their Top Ten most efficient cars tested in 2013, the S-Cross DDiS achieved an average consumption of 59.6mpg. The S-Cross is contributing well to the growth of the brand already at almost 1,000 sales since launch and Suzuki is currently the fastest growing top 20 car manufacturer in the UK with strong sales momentum currently 30.4 per cent up year on year. This week, Suzuki passed the 30,000 unit milestone and the projection is to close 2013 at 33,000 units, an increase of 8,000 over 2012.

www.farmingmonthly.co.uk

| Motors

Carstins West Midlands Tel: 01676 533145

Bulldog Twyford Reading, Berkshire Tel: 0118 9321 331

Beechwood Subaru Derbyshire 01332 381 900

Wolverhampton Subaru West Midlands 01902 351153

Cross Roads Warwickshire Tel: 01608 661544

Subaru Newcastle Tyne & Wear Tel: 0191 274 2000

Shukers Shropshire 01743 444500

Holdcroft Subaru Staffordshire 01782 606 130

www.unityautomotive.co.uk

www.farmingmonthly.co.uk

www.bulldogtwyford.co.uk

www.subarunewcastle.com

beechwoodsubaru.co.uk

www.shukers.com/subaru

www.subaruwolverhampton.co.uk

www.holdcroft.com

December 2013 | Farming Monthly | 67

| Motors

68 | Farming Monthly | December 2013

www.farmingmonthly.co.uk

| Motors

www.farmingmonthly.co.uk

December 2013 | Farming Monthly | 69

| Motors

Volswagen Amarok performs animal magic as RSPCA celebrates a year at the wheel Amarok trusted to collect and distribute supplies to keep animals healthy in all conditions. he Amarok’s legendary load-carrying ability has endeared itself to countless owners since its launch two years ago. Now, thanks to a partnership between Volkswagen Commercial Vehicles and the RSPCA, more than 800 cats and dogs, seven horses and a chicken named Bernadette all have reason to praise its practical load space, smooth ride and off-road prowess. In total, 1,287 animals have been successfully rehomed since Volkswagen Commercial Vehicles loaned the Amarok to the Southridge RSPCA centre in Hertfordshire a year ago. The ultraadaptable pick-up has proved invaluable in rescuing and rehoming a huge variety of animals, from desperate dogs to persecuted parrots. As well as rescuing animals in need, the RSPCA has used the vehicle as a trusty work-horse, using its large load space to pick up weekly pet food donations to feed its 250 live-in animals, mend fencing around its 16-acre site and

tow horse boxes as far as Scotland for animals to be rehomed. The team has even used the pick-up as a ‘search and rescue’ vehicle, using its headlight beams to search for a stray dog reported late at night. Anna White, manager at the RSPCA Southridge centre, said: ‘Having the Volkswagen Amarok at the Centre has been incredible – it has allowed us to just get on with things, without thinking about whether the vehicle would be able to cope. When it snowed earlier this year, one of our animals was in a critical condition. In any of our other vehicles, we wouldn’t have been able to get down the lane to get him to the vet in time to save him, but the Amarok just handled it effortlessly. ‘I used to worry about getting stuck when I was towing a horsebox across the field – now I’m secure in the knowledge that it’s not going to happen. It’s a phenomenal vehicle. It’s fair to say that we’ve really put the Amarok through its paces in the past year

– it’s spent most of its time driving off-road, but it’s just as much of a pleasure to drive on-road.’ Alex Smith, Director of Volkswagen Commercial Vehicles, said: ‘We are thrilled to hear that the Amarok has been such a valuable addition to the RSPCA centre in Southridge. Enabling the RSPCA to carry out its work more easily is just one of the ways in which we have been lucky enough

to demonstrate our on-going support for local businesses and worthy causes across the UK.’ To find out more about the many ways Volkswagen Commercial Vehicles is working to support local businesses, visit https://www.facebook.com/Volksw agenCommercialVehiclesUK

New Honda Civic Tourer prices announced Designed and developed in Europe, the British built Civic Tourer delivers distinctive styling, class-leading utility, advanced technology and an impressive balance between fuel economy and performance. With the new model available to order from beginning of December 2013 and arriving in dealerships in February 2014, Honda has announced prices will start from £20,265 OTR for the entry level 1.8 i-VTEC S model. he Civic Tourer is available with the choice of two engines; the 1.8 i-VTEC petrol and the new Earth Dreams Technology 1.6 i-DTEC diesel and four generously equipped trim levels. The entry level S grade includes features such as Bluetooth Hands Free Telephone (HFT), DAB Radio, USB connectivity and 16 inch allow wheels. In addition to these goodies, the SE Plus, the next level up, has rear parking sensors and 17 inch alloys, whilst SR customers will benefit from the new world first rear Adaptive Damper System (ADS), front heated seats, HDD Navi and privacy glass. Those who opt for the top EX grade will receive headlight washer, smart entry and start capability, sunglasses holder, interior blue ambient lighting and Bi-HID headlights with auto levelling. Efficient engines The new 1.6 i-DTEC diesel engine delivers exceptional fuel economy to help keep running costs low without compromising power and performance. The light weight engine provides a punchy 120 PS and 300 Nm of torque with an acceleration time of 0–60mph in 10.1 seconds, while achieving 74.3mpg on the combined cycle. A range of 817 miles on one tank of fuel means less trips to the fuel pumps and

70 | Farming Monthly | December 2013

CO2 emissions from just 99g/km keeps the car exempt from annual vehicle excise duty. Honda’s proven and reliable 1.8 i-VTEC petrol engine will be available in both manual and automatic transmission and provides 142 PS and 174 Nm of torque, delivering 45.56mpg on the combined cycle and from 149 g/km of CO2 emissions. Versatile The space inside the Tourer defies its dimensions. Despite being the lowest and most compact estate in the segment and being just 235mm longer than the Civic hatchback, the new Tourer offers a class-leading 624 litres of boot space (up to the tonneau cover with rear seats up). Utilising Honda’s unique Magic Seat system, the rear seats can be pulled down to create a completely flat load area with 1668 litres of capacity up to the roof lining, World First Technology The significant luggage space is cleverly supported by the Tourer’s newly developed rear Adaptive Damper System (ADS), a world first. The clever system automatically adjusts the rear suspension damping force designed to enhance stability and comfort under the varying load and driving conditions.

www.farmingmonthly.co.uk

CJB Great Wall Hertfordshire Tel: 01279 656265 www.cjbmotorsales.co.uk

Cross Roads Warwickshire Tel: 01608 661544 unityautomotive.co.uk

Ryedale Garages Ltd North Yorkshire Tel: 01751 431343 www.ryedalegarages.co.uk

David Cook Motors Lancashire Tel: 0161 624 1441 www.davidcookmotors.co.uk

Deal of Kelvedon Essex Tel: 01376 570331 www.dealofkelvedon.co.uk

Chandlers (Horncastle) Lincolnshire Tel: 01507 527211 www.chandlersfe.co.uk

Lloyd 4x4 Cumbria Tel: 01228 517100 www.lloyd4x4.co.uk

Edward Johnson Otley Ltd West Yorkshire Tel: 01943 463007 www.edwardjohnson.co.uk