Ed. 16 Vol. 5 PRODUCT HIGHLIGHT LENOX RECIPROCATING BLADES Part No. F63317 F63300 F63307 Scan for video
WE KNOW MRO
Diameter Height W.A.F. Flange
Part No. F118747 F118471 F14297 F11774 F119913 F18925 F19679 F112741 F112071 F11994 F14180 F14525 F114554 F1455 F15444 F16355 F13222 F17506 F19204 F19698 F118242 F119295 F115802 F114674 F113797 F15364
L xW xT 6” X 3/4” X.035 8” X 3/4” X .050 9” X 1” X .042
Lenox# 618GR 818GR 9114GR
Applications Medium gauge metals and thin metals Medium gauge metals and thin metals Thick gauge metals and medium gauge metals
* See more of this featured product on page 7.
SELF-DRILLING SCREWS — UNSLOTTED INDENTED HEX W/BONDED WASHER
SELF-DRILLING SCREWS — INDENTED HEX WASHER
FASTENERS SAE J78 1979
TPI 18 18 14
Material:
H
Steel
A
D
Plating: D H F A
D #6 #6 #6 #6 #8 #8 #8 #8 #8 #8 #8 #8 #8 #10 #10 #10 #10 #10 #10 #10 #10 #10 #10 #12 #12 #12
Zinc
#6 .093 1/4 .328
L 3/8” 1/2” 3/4” 1” 1/2” 5/8” 3/4” 1” 1-1/4” 1-1/2” 1-5/8” 1-3/4” 2” 1/2” 5/8” 3/4” 1” 1-1/4” 1-1/2” 1-3/4” 2” 2-1/2” 3” 1/2” 3/4” 1”
#8 .110 1/4 .414
Point #2 #2 #2 #2 #2 #2 #2 #2 #2 #2 #2 #2 #2 #2 #2 #3 #3 #3 #3 #3 #3 #3 #3 #3 #3 #3
L
#10 .120 5/16 .414
#12 .155 5/16 .432
Part No. F13728 F11981 F13026 F12493 F18466 F113889 F110112 F118981 F111921 F116469 F13298 F111317 F119019 F118098 F111797 F116092 F17664 F13499 F116173 F111659 F12723 F14908 F112445 F118171 F16782
#14 .190 3/8 .520
D #12 #12 #12 #12 #12 #12 #14 #14 #14 #14 #14 #14 #14 #14 #14 5/16” 5/16” 5/16” 3/8” 3/8” 12-24 12-24 12-24 12-24 1/4-28
5/16” .230 1/2 .676
L 1-1/4” 1-1/2” 1-3/4” 2” 2-1/2” 3” 1/2” 3/4” 1” 1-1/4” 1-1/2” 1-3/4” 2” 2-1/2” 3” 1” 1-1/2” 2” 1” 1-1/2” 7/8” 1-1/4” 1-1/2” 2” 3”
F
3/8” .295 9/16 .780
Point #3 #3 #3 #3 #3 #3 #3 #3 #3 #3 #3 #3 #3 #3 #3 #3 #3 #3 #3 #3 #4 #5 #5 #5 #6
SAE J78 1979
Material:
Steel
Plating:
Zinc
H
Diameter
D
#10
#12
#14
Height
H
.120
.155
.190
W.A.F.
F
5/16
5/16
3/8
Flange
A
.414
.432
.520
Part No. F13636 F12883 F13610 F14816 F117630 F115455 F119831 F15739 F11580 F14710 F16528 F14987 F113750 F117086 F15291 F115114 F13033
D #10 #10 #10 #10 #12 #12 #12 #12 #12 #12 #12 #14 #14 #14 #14 #14 #14
A
D
L
Thread Pith Length Point 16 3/4” #3 16 1” #3 16 1-1/4” #3 16 1-1/2” #3 14 3/4” #3 24 7/8” #4 14 1” #3 24 1-1/4” #5 14 1-1/2” #3 14 2” #3 14 3” #3 14 3/4” #3 14 7/8” #1 14 1” #3 14 1-1/4” #3 14 1-1/2” #3 14 2-1/2” #3
F
FASTENERS
®
SCREWS — INDENTED HEX SELF-DRILLING (TEK) 410 STAINLESS STEEL Material:
ANSI B18.6.4
H
410 Stainless Steel
Plating:
A
D
None
F
L
Diameter Height W.A.F. Flange
Part No. F116147 F119925 F1487 F117069 F111086 F16655 F16054
D H F A
#6 .093 1/4 .320
D #6 #6 #6 #6 #6 #6 #8
#8 .110 1/4 .348
L 3/8” 1/2” 5/8” 3/4” 1” 1-1/4” 1/2”
ELECTRICAL
#10 .120 5/16 .414
Part No. F110530 F117850 F119196 F112589 F119835 F17969 F115021
#12 .155 5/16 .432
#14 .190 3/8 .520
D #8 #8 #8 #8 #8 #8 #10
L 5/8” 3/4” 1” 1-1/4” 1-1/2” 2” 1/2”
Part No. F11995 F113355 F117103 F13574 F12616 F14303 F117510
D #10 #10 #10 #10 #10 #10 #10
L 5/8” 3/4” 1” 1-1/4” 1-1/2” 2” 2-1/2”
Part No. F19031 F118398 F115805 F114607 F19660 F115816 F1756
D #12 #12 #12 #12 #12 #12 #12
L 3/4” 1” 1-1/4” 1-1/2” 2” 2-1/2” 3”
Part No. F117694 F19958 F17083 F118595 F16832 F18216 F11756
ECONOMY IMPORTED AUTO BULBS
D #14 #14 #14 #14 #14 #14 #14
L 3/4” 1” 1-1/4” 1-1/2” 2” 2-1/2” 3”
NEW PRODUCT
NEW BODY CLIPS
F25091
F25094
F25095
F25096
F25104
F25090
F25093
F25097
F25099
F25100
F25102
F25103
F25079
F25080
F25084
F25085
F25086
F25087
F25088
F25089
F25081
F25082
F25083
F25092
F25098
F25101
Part No. F25091 F25094 F25095 F25096 F25104 F25090 F25093 F25097 F25099 F25100 F25102 F25103 F25079 F25080 F25084 F25085 F25086 F25087 F25088 F25089 F25081 F25082 F25083 F25092 F25098 F25101
Description 24 bulb T-2/3 wedge 14V 3.36W 57 bulb mini bayonet BA9s 14V 3.36W 74 bulb T-1 3/4 wedge 14V 1.4W 90 bulb BA15d 13V 7.54W 97 bulb SC BA15s 13.5V 9.3W 198 bulb DC index bayonet 15d 12/14V 561 bulb T-3 loop 12.8V12.416W 906 bulb T-5 wedge 13.5V 9.315W 912 bulb T-5 wedge 12.8V 12.8W 916 bulb T-5 wedge 13.5V 7.29W 921 bulb T-5 wedge 12.8V 922 bulb T-5 wedge 12.8V 1003 bulb bayonet BA15s 12.8V 1004 bulb bayonet BA15d 12.8V 1445 bulb G3 1/2 M bayonet 14V 1816 bulb T-3 1/4 M bayonet 13V 1889 bulb T-3 1/4 M bayonet 14V 1891 bulb T-3 1/4 M bayonet 14V 1893 bulb T-3 1/4 mini bayonet BA9s 14V 1895 bulb G4 1/2 mini BA9s 14V 1156NA SC bayonet 15s 12.8V nat amber 1157NA S8 DC bayonet 15d 12.8/14V 1295NA bulb S8 SC bayonet 12.5V nat amber 24 NA bulb T-2 3/4 wedge 14V nat amber 906NA bulb T5 wedge 13V amber 916NA bulb T5 wedge 13.5V nat amber
Bulb No. 24 57 74 90 97 198 561 906 912 916 921 922 1003 1004 1445 1816 1889 1891 1893 1895 1156NA 1157NA 1295Na 24NA 906NA 916NA
Color Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Clear Amber Clear Amber Amber Amber Amber
Note: These bulbs are stocked in Plano warehouse only
Page 2
WE KNOW MRO
ELECTRICAL
®
NEW PRODUCT
TERMINAL PROTECTORS Part No. F25076 F25077
Description Replacement for the F2397 Top Post Black/Red Terminal Protectors 2 per package Replacement for the F23036 Side Post Black Terminal Protectors 50 per package
Part No. F25105 NEW BODY CLIPS
NEW PRODUCT
3 VOLT LITHIUM BATTERIES Package 6 Pack
NEW BODY CLIPS
• The popular CR123A 3 volt lithium battery is now available in 6 packs
EXPANDABLE SLEEVING
NEW PRODUCT
SCISSOR CUT FOR EASY, FRAY RESISTANT INSTALLATION Part Number F25106 F25107 F25108 F25109 F25110 F25111
Nominal Size 1/8” 1/4” 3/8” 1/2” 3/4” 1”
Expansion Range Min. Max. 1/8” 1/4” 5/32” 7/16” 3/16” 5/8” 1/4” 3/4” 5/8” 1” 3/4” 1 3/16”
Color Black Black Black Black Black Black
• Sleeving with the unique advantage of being able to cut the material with ordinary scissors and still maintain an extraordinarily fray-resistant end without the addition of chemical binders or adhesives • Ideal for field installers and other situations where access to a hot knife is impossible. Fray resistant properties allows frequent expansion of the cut end without unraveling. When cut with a hot knife, produces a clean, smooth and virtually frayless end • Braided for maximum coverage while still allowing enough expansion for easy installation over plugs and connectors • Supplied in 100 foot rolls
CHEMICALS
SPORT KOTE
WATER-BASED URETHANE WOOD FLOOR FINISH
NEVADA & WISCONSIN
24” HEAVYWEIGHT T-BAR WITH POLE WOOD FLOOR FINISH APPLICATOR Part No. F42435 F42436
NEW BODY CLIPS
Package Each 6 Pack Replacement Pads
Part No. F33008
Package 1 Gallon
NEVADA & WISCONSIN
• 24” heavyweight T-bar applicator • Use in conjunction with watering can to quickly and evenly apply wood floor finishes • T-Bar replacement pads 6 Pack – F42436
FLOOR SWEEPING COMPOUNDS Part No. F32512 F3823 F31064
Description Premium Oil Base Premium Wax Base Clean Sweep Oil Base
Color Red Green Red
LOUISIANA
Package 50 Pound Box 50 Pound Box 50 Pound Box
• Premium Oil Based — effectively controls dust on both concrete and wood floors. For use on floors not damaged by oil • Premium Wax Based — Made with hardwood sawdust, used for dust control while sweeping • Clean Sweep Oil Based — Controls dust on concrete floors (contains sand/grit )
WE KNOW MRO
• Single-component formula means no pot life and no mess. Finish is useable the next day if more coats are desired • Contains reactive polymers that offer durability and appearance equal or greater than oil-modified products • Excellent black mark, scuff and soil resistance • One hour dry time between coats under normal conditions • Only 24 hour gym down time • Uniquely restorable with high speed buffer • Suitable for oak, maple and parquet floors • VOC compliant in all states • MFMA approved - meets all standards set for group five products, water-based finish
Page 3
CHEMICALS
®
CORROSION X Part No. F31988
Net Weight 16 oz
ISI POLY ORANGE 40 Can Size 20 fl oz
CorrosionX is the most advanced and effective corrosion prevention compound, lubricant and penetrant in the world! CorrosionX utilizes a revolutionary technology called Polar Bonding that actually kills existing rust and corrosion and provides long-term protection against rust and corrosion on any metal or electronic surface.
SUPER LUBE OIL WITH PTFE Part No. F31419 F3560
Description 1 Gal 7 ml Pocket Oiler
• A premium synthetic oil with suspended PTFE particles • Use as a general purpose lubricant for industrial machinery and equipment • Viscosity stable, long lasting • Contains no silicone • USDA approved: H1 (Food Grade) • Safe on metal, rubber, plastic, leather, fabric, and painted surfaces • Applications: enclosed industrial gears, chains, gear head motors, conveyors, machine tools, roller bearings, etc.
Part No. F34330 F34331 F34332 F34333 F34070
Description Gallon Case - Gallon x 4 Quart Case - Quart x 12 5 Gallon Pail
GASKET REMOVER Part No. F34338 F34340
NEW PRODUCT
Description Dynatex Gasket Remover Case of 12
• Penetrates and cleans intricate shapes • Removes gasket reside in 10-12 minutes • Quickly removes baked-on gaskets, silicone weatherstrip adhesives, grease and paint • Eliminates excessive scraping and potential damage to flanged surfaces • Saves time and labor • Tested in accordance to 75/324/EEC Directive 6.1
NANO HIGH-SOLID FLOOR FINISH
Part No. F33594 F33595 F33523
Part No. F33004 F33520 F33521
Package 1 Gallon 4 x 1 Gallons 5 Gallon Pail
• Remarkable, no rinse, floor cleaner leaves floors sparkling clean • Amazing cleaning action safely lifts soils from floors, walls, woodwork and virtually any surface not harmed by water • Will not damage, soften or dull floor finishes • Highly concentrated, non-corrosive, non-hazardous, and non-flammable • Pleasant lemon-lime fragrance leaves cleaned areas with fresh clean scent • Low foam formulation works well in any water temperature and condition • Dries quickly, saves time and labor
Package 1 Gallon 4 x 1 Gallons 5 Gallons
• Nano-zinc cross-linking provides superior: Lay-down gloss, gloss build, durability, mark resistance, soil resistance, dry and recoat times • Ammonia-free for dramatically-reduced odor • Ideal for limited maintenance programs, yet responds to daily burnishing, if desired • Low-emissions formula - meets California’s new 1% VOC regulation • Fast-drying - 15 to 20 minutes under normal conditions • Slip-resistant - UL Classified
HEAVY DUTY STRIPPER
LOW MAINTENANCE FINISH
Part No. F33007 F33506
Part No. F33005 F33006 F33516
• Contractor-grade formulation strips hard to remove finishes and seals • Eliminates or greatly reduces machine scrubbing • Powerful enough to remove multiple layers, build-up or highly burnished finish • Low foam for easy application with automatic-scrubbers • Designed to strip equally well in cold or warm water
Page 4
NEW BODY CLIPS
• Cleans grease and heavy oil deposits from most surfaces • Drain cleaner and grease trap maintainer • Deodorizer • Concentrated • Non-butyl, non-corrosive, non-flammable, no petroleum distillates • Contains d-Limonene • Will dull some floor seals, finishes and some types of protective coatings. Test on an inconspicuous area first. • For: Grease traps, drains, trucks and heavy equipment, engine parts, tar and asphalt removal • Dosing: Degreasing: 1:10 (rinse thoroughly), Industrial equipment: 1:20 • Fragrance: Citrus
NEUTRAL PH FLOOR CLEANER
Package 1 Gallon 4 x 1 Gallons
NEW PRODUCT
Package 1 Gallon 4 x 1 Gallons 5 Gallons
• Extremely durable and mark-resistant finish for low maintenance applications • High gloss acrylic polymers stay clean, clear, and shiny to reduce maintenance • Non-yellowing, low maintenance formula offers superb black mark and scuff resistance • Ideal for reduced burnishing programs (once per week) • Use on vinyl tile, rubber, linoleum, terrazzo and quarry tile floors • Excellent seal properties
WE KNOW MRO
NEW BODY CLIPS
CHEMICALS
®
ZEST ND DISINFECTANT
NEUTRAL DISINFECTANT MULTI-PURPOSE CLEANER Available in the following states: CA, NV, NM, OK, TX, ND, MN, IL, MI, IN, OH, PA
Part No. F33192 F33171
Package 1 Gallon 4 x 1 Gallons
SHOP SUPPLIES Part No. F42389 F42390
AIR CONDITIONING SEALANT TAPE
TOOLS — PLIERS Jaw Capacity 3-1/8" 2-3/4"
Description 8" Sheet Metal Tool 9" Welding Clamp
• Disinfectant, cleaner, mildewstat, fungicide, virucide and deodorant • Applications: hospitals, nursing homes, schools, veterinary areas, restrooms, carpet and upholstery, commercial, institutional and industrial use • Meets OSHA bloodborne pathogen standard for HIV, HBV and HCV • Effective against Parvovirus (CPV), Porcine Parvovirus and Rabies • Will not dull floor finishes • EPA registered hospital grade quaternary detergent • General dilution: 2 oz • Fragrance: Lemon
• Vise-Grip brand • Used for turning, cutting, tightening, clamping, and twisting • Hardened tooth design grips from any angle • Convenient wire cutter cuts up to a 1/4” bolt • Made from high grade alloy steel heat treated for maximum toughness and durability
Part No. F41281 • Makes bending, forming and crimping sheet metal easier
Size 2” x 30”
• Dum Dum tape 1/8” thick • Black foam rubber • Insulates, prevents condensation, deadens sound
®
• U-shaped jaw provides enhanced visibility and more working space
FREIGHTLINER REPLACEMENT MARKER LIGHT Part No. F24957
NEW PRODUCT
Description 7 LED side turn / side marker light in amber
• Drop in replacement for Freightliner • OE# A06-58770-000 • Delphi OEM connector on the back to easily connect to the vehicle harness • DOT/SAE J2039, J592e, J2042 • 3-pin Delphi GT150 connector • 5 year warranty
NEW BODY CLIPS
THREAD SEALANT TAPE
PROFESSIONAL GRADE VINYL ELECTRICAL TAPE
USA Part No. F43627 F43628 F43629 F43630
Part No. F43589 F43590 F43591 F43592 F43593 F43594 F43595 F43596 F43597
Import Part No. F484 F41748 F4643 F4253
Size 1/2" x 260" 1/2" x 520" 3/4" x 520" 1" x 260"
• Medium density thread sealant tape with PTFE • Lubricates, protects and seals threads • Thread sealant tape makes it easier to assemble or disassemble threaded fittings, without the risk of system contamination • Tape thickness: 4mil • Standard Density: 0.28 gm/cm3 – 100% virgin PTFE • Temperature range: 375° F to 500° F
Size 3/4” x 60' 3/4” x 60' 3/4” x 60' 3/4” x 60' 3/4” x 60' 3/4” x 60' 3/4” x 60' 3/4” x 60' 3/4” x 60'
Color Black Red Blue Yellow White Green Orange Brown Purple
• 7 mil thickness • Cold and heat resistant. Resists UV rays, acids, alkalis, abrasion, moisture and corrosion • Maximum 600 volts • Maximum temperature: 176º F (80º C) • Meets ASTM D-3005 and HHI-585 specifications
TORX BIT SET WITH HOLDER SET
SWIVEL HEAD MAGNET
Part No. F4100
Part No. F41576
Includes one each of the following: • Magnetic hex bit holder • Torx bits T10, T15, T20, T25, T30, T40 • 1/4” shank
• 10-lb pick-up swivel head magnet with telescopic shaft
WE KNOW MRO
Page 5
AUTOMOTIVE
®
48” RETRACTABLE KEY RING Part No. F91028
QUIKLEEN® ABSORBENT
144/Box F91030
• Perfect for maintenance, security and industrial professionals • 48” retractable Kevlar cord • Split key ring attachment • Belt clip • Holds 15 keys • 2” diameter • Made in USA
1/4” STRAIGHT DIE GRINDER Part No. F4894
Part No. F42324 F42402 F42325
Size Gallon Jug Gallon Jug x 4 20 lb Bag
• Quikleen® is an inert, inorganic, non-biodegradable blend of minerals. It works by means of known as “silica encapsulation”. The absorbed liquid actually becomes part of the silica molecule. • All natural, non-toxic, non-flammable, non-biodegradable, non-leaching, reusable • Landfill acceptable and EPA certified • 1.5 lbs of Quikleen® will absorb an entire quart of motor oil vs 15 lbs of clay • Absorbs oils, fuels, grease, solvents, acids (except hydrofluoric), paint, coolants, bodily fluids, sewage
• Compact and lightweight • Lever throttle for feathering control • Rear exhaust Specifications: • Collet Size: 1/4” • Free speed: 22,000 rpm
ABRASIVES STEEL
• Overall length: 5-3/4” • Net weight: 1-1/4” lbs • Motor: 1/3” hp • Air inlet thread: 1/4” NPT • Air hose ID size: 3/8” • Avg. air consumption: 4 cfm • Air pressure: 90-120 psi
CC-GRIND-SOLID GRINDING DISC STAINLESS STEEL
Part No. F51105 F51107 F51108 F51109
Dia x Arbor 4-1/2” x 7/8” 4-1/2” x 5/8”-11 7” x 7/8” 7” x 5/8”-11
Part No. F51110 F51111 F51112 F51113
Dia x Arbor 4-1/2” x 7/8” 4-1/2” x 5/8”-11 7” x 7/8” 7 ”x 5/8”-11
• CC-GRIND-SOLID for rough grinding applications • 40% more productivity due to ultimate stock removal rates compared with reinforced grinding wheels • 50% less noise and vibration during use • As tough and safe as a reinforced grinding wheel and 100% increased aggressiveness • Maximum RPM for 4-1/2” is 13,300 • Maximum RPM for 7” is 8,500
CUTTING TOOLS Part No. F61680* F61702* F61698* F61705* F61689* F61707* F61701* F61681* F61696 F61684 F61704 F61687 F61685 F61688 F61706
Diameter 1/16” 5/64” 3/32” 7/64” 1/8” 9/64” 5/32” 11/64” 3/16” 13/64” 7/32” 15/64” 1/4” 17/64” 9/32”
Overall Length 1-7/8” 2” 2-1/4” 2-3/8” 2-1/2” 2-5/8” 2-3/4” 2-7/8” 3” 3-1/8” 3-1/4” 3-3/8” 3-1/2” 3-5/8” 3-3/4”
MECHANICS LENGTH DRILLS Part No. F61690 F61700 F61691 F61679 F61692 F61699 F61693 F61683 F61694 F61703 F61695 F61686 F61697 F61682
Diameter 19/64” 5/16” 21/64” 11/32” 23/64” 3/8” 25/64” 13/32” 27/64” 7/16” 29/64” 15/32” 31/64” 1/2”
Overall Length 3-7/8” 4” 4-1/16” 4-1/8” 4-3/16” 4-1/4” 4-5/16” 4-3/8” 4-7/16” 4-1/2” 4-5/8” 4-3/4” 4-7/8” 5”
*Note: 11/64” and smaller do not have Flats on the shank.
Page 6
WE KNOW MRO
AUTOMOTIVE
®
LENOX GOLD BLADES Part No. F63299 F63310 F63311 F63312 F63313 F63314 F63315 F63316 F63317 F63300 F63301 F63302 F63303 F63304 F63305 F63306 F63307 F63308 F63309
TPI 6 6 6 10 10 14 14 18 18 18 24 24 6 6 10 14 14 14 18
L xW xT 6” X 3/4” X .050 9” X 3/4” X .050 12” X 3/4” X .050 6” X 3/4” X .035 8” X 3/4” X .050 4” X 3/4” X .035 6” X 3/4” X .035 4” X 3/4” X .035 6” X 3/4” X.035 8” X 3/4” X .050 4” X 3/4” X .035 6” X 3/4” X .035 6” X 1” X .062 9” X 1” X .062 9” X 1” X .062 6” X 1” X .042 9” X 1” X .042 12” X 1” X .042 6” X 1” X .042
Lenox# 656GR 956GR 156GR 610GR 810GR 414GR 614GR 418GR 618GR 818GR 424GR 624GR 6066GR 966GR 960GR 6114GR 9114GR 2114GR 118GR
Applications Rough work in wood Rough work in wood Rough work in wood Wood, plastic and heavy gauge metal Wood, plastic and heavy gauge metal Heavy gauge metal and medium gauge metal Heavy gauge metal and medium gauge metal Medium gauge metals and thin metals Medium gauge metals and thin metals Medium gauge metals and thin metals Thin metals Thin metals Demolition work in wood and metal Demolition work in wood and metal Fire and rescue and demolition work Thick gauge metals and medium gauge metals Thick gauge metals and medium gauge metals Thick gauge metals and medium gauge metals Medium gauge metals
• T2 technology and precision applied titanium coating help dissipate heat making blades last longer • Titanium coating makes teeth more wear resistant so they stay sharp for quicker cuts • T2 technology’s patented tooth design delivers longer blade life and enables faster cutting in the widest array of cutting applications
DRILLS — SILVER & DEMING Part No. F61781 F61774 F61783 F61800 F61784 F61775 F61785 F61795 F61786 F61776 F61787 F61771 F61788 F61777 F61789 Part No. F62643 F62644
Size 33/64” 17/32” 35/64” 9/16” 37/64” 19/32” 39/64” 5/8” 41/64” 21/32” 43/64” 11/16” 45/64” 23/32” 47/64”
Part No. F61782 F61790 F32738 F61791 F61772 F61792 F61778 F61793 F61799 F61794 F61779 F61796 F61773 F61797 F61780
Size 3/4” 49/64” 25/32” 51/64” 13/16” 53/64” 27/32” 55/64” 7/8” 57/64” 29/32” 59/64” 15/16” 61/64” 31/32”
Part No. F61798 F61801 F62647 F62645 F62651 F62649 F62654 F62650 F62656 F62648 F62653 F62652 F62655 F62646
Size 63/64” 1” 1-1/32” 1-1/16” 1-3/32” 1-1/8” 1-5/32” 1-3/16” 1-7/32” 1-1/4” 1-5/16” 1-3/8” 1-7/16” 1-1/2”
Description 8 - piece set includes 9/16”, thru 1” by 16th 8 - piece set replacement index
SECURITY
• 1/2” shanks • 3 Flats on the shanks - to virtually eliminate chuck slippage • Hi-molybdenum tool steel for the tough drilling jobs like stainless steel • Nitro-carburized surface treatment helps keep these drills sharp under high heat conditions • Genuine ShopPro quality • 118° split point • Made in USA
CLAMPS — EAR TYPE
2 - EAR CLAMPS
RUBBER WHEEL CHOCKS Part No. F84387
• Constructed of fiber-reinforced rubber • Reduces the risk of truck and trailer movement • Extra large eye bolt for added security and ease of handling • Size: 7-3/4” x 9-1/2” x 5-5/8”
Part No. F82596 F82029 F82139 F83769 F84358 F85129 F84137 F8131 F81135 F82867 F82178 F83866 F81158 F81233 F83862
Size M5 (3/16”) M7 (1/4”) M9 (5/16”) M11 (3/8”) M13 (1/2”) M15 (9/16”) M18 (5/8”) M20 (3/4”) M22 (13/16”) M23 (7/8”) M27 (1”) M31 (1-1/8”) M33 (1-5/16”) M37 (1-7/16”) M40 (1-1/2”)
Band Width 5mm 6mm 7mm 7mm 7mm 7.5mm 8mm 8.5mm 9mm 9mm 10mm 10mm 10mm 10mm 10mm
Min. Dia. 3mm 5mm 7mm 8mm 11mm 13mm 15mm 17mm 19mm 20mm 23mm 27mm 29mm 33mm 36mm
WE KNOW MRO
Max. Dia. 5mm 7mm 9mm 11mm 13mm 15mm 18mm 20mm 22mm 23mm 27mm 31mm 33mm 37mm 40mm
• Widely used for maintenance and OEM applications • Installed on air, fluid, gas and steam lines • One piece design offers a positive, taperproof seal without damage to the hose • Zinc plated • Use tool F85012 or F82860 to install
Page 7
WELDING ELECTRODES 220MS (MILD STEEL) 50# Bulk Pack Part No. Part No. F41835 F42010 F41836 F42008 F41838 F42011 F41837 F42009
Diameter 1/16” 3/32” 1/8” 5/32” 3/16”
Length 12” 14” 14” 14” 14”
Flux Color Tan Gold Gold Gold Gold
Package Size 5 lbs 10 lbs 10 lbs 10 lbs 10 lbs
• Universal all-position electrode ideally suited for repair and fabrication of all types of mild steel and sheet metal • Excellent for poor fit situations and joining sheet metal to thick stock • No sticking and easy restrike • Easily repairs galvanized steel even if dirty and greasy. Saves prep time • Replaces any 60 series (6010, 6011, 6013, etc.) electrode but has a higher tensile strength and elongation % • Electrode can be bent without flux breakage • Contact (drag) type transfer allows electrode to weld by itself
1116LH (LOW HYDROGEN) 50# Bulk Pack Part No. Part No. F41992 F41993 F41826 F41990 F41828 F41994 F41827 F41991
Diameter 3/32” 1/8” 5/32” 3/16”
Length 14” 14” 14” 14”
Flux Color Gray Gray Gray Gray
• Welding Positions: flat, horizontal, flat up and down, and overhead • Recommended Current: DC Straight (-), Reverse (+) or AC • Recommended Amperage Settings (min/max): 1/16” (20/40); 3/32” (50/70); 1/8” (70/110); 5/32” (115/140); 3/16” (150/200) • Tensile Strength: 83,000 psi • Yield Strength: 75,000 psi • Elongation: 25%
Package Size 10 lbs 10 lbs 10 lbs 10 lbs
• Low Hydrogen, high strength DC electrode for joining low and medium carbon steels, low alloy steels and construction steels • Low spatter yield, self-releasing slag and uniform ripple deposits • 1116LH has an extra low moisture content to reduce hydrogen induced cracking in the weld • Welds even dirty and greasy steel. Saves prep time • Replaces any 70 series electrodes (7014, 7018, 7024, etc.) but has a higher tensile strength and elongation % • Operates in all positions • Flux Color: Gray • Welding Positions: flat, vertical up and down, horizontal, and overhead
• Recommended Current: DC Reverse (+) • Recommended Amperage Settings (min/max): 1/8” (100/140); 5/32” (140/190) • Tensile Strength: 120,000 psi • Yield Strength: 96,000 psi • Elongation: 23% • Welding Techniques: For the majority of materials to be welded with these elctrodes, minimum preheats between 212°F 176;F (100°F 176°C) and 392°F 176°F (200°F 176°C) is required to avoid hydrogen induced “cold” cracking. Remove all surface contaminants. Maintain a short arc gap and use a stringer or slight weave technique. Chip slag thoroughly between passes
2200DS (DISSIMILAR STEELS) 50# Bulk Pack Flux Part No. Diameter Length Color 3/32” 12” Lt. Gray F42016 1/8” 12” Lt. Gray 5/32” 12” Lt. Gray
Package Size 5 lbs 5 lbs 5 lbs
• Excellent for stud pulling and broken stud and bolt removal • Special all-position high tensile strength electrode for all steels and dissimilar metals • Unique “Quick Freeze” coating simplifies vertical down and up welding • Ideal for poor fit up joints in all positions • Controlled weld puddle allows for filling holes and joining dissimilar steels • Welds even dirty and greasy metal. Saves prep time • Use to solve the problem of welding “mystery metals” • Creates very little smoke compared to other electrodes • Runs with very low spatter, so it’s safer to operate • Ideal for repairing tools, dies, spring steel and any dissimilar metal combinations, except for aluminum and copper alloys
• Welding Positions: flat, horizontal, vertical up and down, and overhead • Recommended Current: DC reverse (+) or AC • Recommended Amperage Settings (min/max): 5/64” (35/55); 3/32” (35/70); 1/8” (60/110); 5/32” (75/140) • Tensile Strength as Welded: 128,000 psi • Tensile Strength Work Hardened: 186,000 psi • Yield Strength: 90,000 psi • Hardness: Rockwell B97; Brinell 320 • Elongation: 32%
SUPPLY
®
Ed. 16 Vol. 5
WE KNOW MRO
Part No. F41840 F41839 F41841