NSPA CONNECTORS SEALED CRIMP AND SOLDERED CONNECTORS
NSPA Connectors sealed crimp and soldered connectors SEALED CRIMP AND SOLDER CONNECTORS Sealed Crimp and Solder Connectors are crimped for mechanical reliability, soldered for superior strength and conductivity and sealed for maximum durability. When there is no margin for error, choose SEALED CRIMP & SOLDER CONNECTORS...THE ULTIMATE CONNECTOR.
SEALED
CRIMP
SOLDER
CRIMP
• • • • • •
Installs faster No hazardous metals Lead free solder is stronger Sealed for maximum durability Crimped for mechanical reliability Soldered for superior strength and conductivity
SEALED
[CUT-AWAY VIEW]
Installation is Simple: Just Crimp it... Solder it... and Seal it!
BUTT CONNECTORS Part No.
Wire Gauge
Color Tubing
Type
Seam
F23382 F23163 F22706 F2248
24-22 AWG 22-18 AWG 16-14 AWG 12-10 AWG
Clear Red Blue Yellow
Standard Standard Standard Standard
Seamless Seamless Seamless Seamless
F2248
STEP-DOWN BUTT CONNECTORS
2
Part No.
Wire Gauge
Color Tubing
Type
Seam
F25004 F25003 F25001 F25002
24-22 to 22-18 AWG 22-18 AWG to 16-14 AWG 16-14 AWG to 12-10 AWG 12-10 AWG to 8 AWG
Red Blue Yellow Pink
Standard Standard Standard Standard
Seamless Seamless Seamless Seamless
F25003
We Know MRO!
NSPA Connectors
sealed crimp and soldered connectors
LEAD FREE SOLDER IS STRONGER • • • • •
Lead free solder has greater surface tension Solder stays in place which provides greater tensile strength than other solder sleeves New solder much less likely to run out of the tubing Solder sleeves pre-fluxed to clean metals and provide a quality solder termination New lead free solder has lower melt temperature (138°C vs 145°C)
ORIGINAL SOLDER CAN BECOME RUNNY
NEW SOLDER HAS GREATER SURFACE TENSION = LESS RUNNY
NO HAZARDOUS METALS • Lead free solder has greater surface tension • Solder stays in place which provides greater tensile strength than other solder sleeves • New solder much less likely to run out of the tubing • Solder sleeves pre-fluxed to clean metals and provide a quality solder termination • New lead free solder has lower melt temperature (138°C vs 145°C)
NO LEAD SYMBOL
LEAD NEW RING TERMINAL DESIGN • • • •
45° barrel allows installer to see wire is fully inserted and wire is crimped to terminal 45° barrel ensures wire is stripped the proper length Longer neck ensures a strong seal and allows multiple terminals to be stacked Traditional ring terminals were not designed to be insulated with heat shrink tubing, which often results with the tubing impeding contact between the screw and terminal
NEW LONGER NECK
CAN SEE WIRE CLEARLY
We Know MRO!
NEW SOLDER IS LESS RUNNY
45° BARREL-CAN SEE SOLDER FLOW 3
NSPA Connectors sealed crimp and soldered connectors RING TERMINALS Part No.
Wire Gauge
Color Tubing
Description
Type
Seam
F24971 F24972 F24973 F24974 F24976 F24975 F24965 F24966 F24967 F24968 F24970 F24969 F24958 F24959 F24960 F24962 F24964 F24963 F24961
22-18 AWG 22-18 AWG 22-18 AWG 22-18 AWG 22-18 AWG 22-18 AWG 16-14 AWG 16-14 AWG 16-14 AWG 16-14 AWG 16-14 AWG 16-14 AWG 12-10 AWG 12-10 AWG 12-10 AWG 12-10 AWG 12-10 AWG 12-10 AWG 12-10 AWG
Red Red Red Red Red Red Blue Blue Blue Blue Blue Blue Yellow Yellow Yellow Yellow Yellow Yellow Yellow
#6 Stud #8 Stud #10 Stud 1/4” Stud 5/16” Stud 3/8” Stud #6 Stud #8 Stud #10 Stud 1/4” Stud 5/16” Stud 3/8” Stud #6 Stud #8 Stud #10 Stud 1/4” Stud 5/16” Stud 3/8” Stud 1/2” Stud
Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard
Brazed Brazed Brazed Brazed Brazed Brazed Brazed Brazed Brazed Brazed Brazed Brazed Brazed Brazed Brazed Brazed Brazed Brazed Brazed
F24971
F24967
F24964
SPADE TERMINALS Part No.
Wire Gauge
Color Tubing
Description
Type
Seam
F24983 F24984 F24985 F24980 F24981 F24982 F24977 F24978 F24979 F24983 F24984 F24985 F24989 F24990 F24991 F24986 F24987 F24988
22-18 AWG 22-18 AWG 22-18 AWG 16-14 AWG 16-14 AWG 16-14 AWG 12-10 AWG 12-10 AWG 12-10 AWG 22-18 AWG 22-18 AWG 22-18 AWG 16-14 AWG 16-14 AWG 16-14 AWG 12-10 AWG 12-10 AWG 12-10 AWG
Red Red Red Blue Blue Blue Yellow Yellow Yellow Red Red Red Blue Blue Blue Yellow Yellow Yellow
#6 Stud #8 Stud #10 Stud #6 Stud #8 Stud #10 Stud #6 Stud #8 Stud #10 Stud #6 Stud #8 Stud #10 Stud #6 Stud #8 Stud #10 Stud #6 Stud #8 Stud #10 Stud
Standard Standard Standard Standard Standard Standard Standard Standard Standard Spring Spade Spring Spade Spring Spade Spring Spade Spring Spade Spring Spade Spring Spade Spring Spade Spring Spade
Brazed Brazed Brazed Brazed Brazed Brazed Brazed Brazed Brazed Brazed Brazed Brazed Brazed Brazed Brazed Brazed Brazed Brazed
F24984
F24981
F24978
F24989
SLIP-ON CONNECTORS Part No.
Wire Gauge
Color Tubing
Description
Type
Seam
F24997 F25007 F25000 F24996 F25006 F24999 F24995 F25005 F24998
22-18 AWG 22-18 AWG 22-18 AWG 16-14 AWG 16-14 AWG 16-14 AWG 12-10 AWG 12-10 AWG 12-10 AWG
Red Red Red Blue Blue Blue Yellow Yellow Yellow
Female .250” tab Female .250” tab Male .250” tab Female .250” tab Female .250” tab Male .250” tab Female .250” tab Female .250” tab Male .250” tab
Standard Fully Insulated Standard Standard Fully Insulated Standard Standard Fully Insulated Standard
Butted Butted Brazed Butted Butted Brazed Butted Butted Brazed
F24997
F25006
F25005
4
We Know MRO!
NSPA Connectors
sealed crimp and soldered connectors
OPTISEAL SEALED CRYSTAL CLEAR CONNECTORS OptiSeal Sealed Crystal Clear Connectors are designed to provide optimal visual assurance that the termination is installed properly and offers visual inspection of the wire condition over the life of the connection.
CRIMP
SEALED
SEALED
• Crystal Clear™ waterproof insulation allows for indisputable inspection of the wire’s condition • Longer ring terminals peovide ideal seal and offers a flush surface without tubing • Color stripes provide alignment for tool to crimp center of barrel and indicates industry standard for wire gauge size
CRIMP
CRIMP
SEALED
SEALED
NEW LONGER NECK
Standard connectors do not allow the installer to see the wire which can result in the following problems:
We Know MRO!
• Wire stripped too short, which can result in crimping the end of the wire (poor termination) • Wire is not fully seated to connector, which can result in a poor termination
5
NSPA Connectors sealed crimp and soldered connectors CRYSTAL CLEAR™ ADHESIVE-LINED HEAT SHRINK TUBING • Crystal Clear tubing provides optimal clarity for visual inspection • Adhesive-lined tibing ensures a waterproof and secure seal • Wire guage imprint identifies industrial standard wire size guage
• • • •
STANDARD CLEAR HEAT SHRINK TUBING
• • • •
CRYSTAL CLEAR™ HEAT SHRINK TUBING
WINDOW BUTT CONNECTORS
• Window in center of connector assures that wire is seated and crimped to the connector • Color-coded stripes identify wire gauge size to be used with connector • Color-coded stripes also indicate/guide where to properly position crimp nest to install • Seamless barrel butt connectors ensure superior crimp performance and strength • Wire-stop in butt connectors prevent over-insertion of wire
STANDARD TERMINAL
POOR CONNECTION
6
Material: Cross-linked ionic polymer Shrink Ratio: Exceeds 2.5 to 1 Shrink/Recovery Temperature: 90°C (194°F) Continuous Operating Temp: -55°C to 125°C (-67°F to 257°F) Flammability: Passed (FMVSS 302 test) Tensile Strength: 4,000 psi Longitudinal Change: +1/-10% Max Dielectric Strength: 750 V/Mil (30KV/MM)
45° RING TERMINAL
• 45° barrel assures that wire is seated properly and wire is being crimped to terminal • 45° barrel angle allows tubing to adhere to it and provides stronger seal • The long ring terminal neck provides a flush surface for maximum contact and allows ring terminals to be stacked • Color-coded stripes identify wire gauge size to be used with connector • Color-coded stripes also indicate/guide where to position crimp nest to install properly • Brazed seam barrel ensures superior crimp performance and strength • Serrations in crimp barrel provide a strong mechanical termination
OPTISEAL TERMINAL
STACKS WITHOUT IMPENDING
We Know MRO!
NSPA Connectors
sealed crimp and soldered connectors
BUTT CONNECTORS Part No.
Wire Gauge
Color Stripe
Description
Seam
F23978 F23977 F23976
22-18 AWG 16-14 AWG 12-10 AWG
Red Blue Yellow
Butt Connector Butt Connector Butt Connector
Seamless Seamless Seamless
F23978
F23977
F23976
STEP-DOWN BUTT CONNECTORS Part No.
Wire Gauge
Color Stripe
Description
Seam
F25037 F25036 F25035 F25034
24-22 AWG to 22-18 AWG 22-18 AWG to 16-14 AWG 16-14 AWG to 12-10 AWG 12-10 AWG to 8 AWG
White/Red Red/Blue Blue/Yellow Yellow/Red
Step-Down Step-Down Step-Down Step-Down
Seamless Seamless Seamless Seamless
F25036
F25035
RING TERMINALS Part No.
Wire Gauge
Color Stripe
Stud
Description
Seam
F25031 F25032 F25033 F25026 F25027 F25028 F25029 F25030 F25021 F25022 F25023 F25025 F25024
22-18 AWG 22-18 AWG 22-18 AWG 16-14 AWG 16-14 AWG 16-14 AWG 16-14 AWG 16-14 AWG 16-14 AWG 12-10 AWG 12-10 AWG 12-10 AWG 12-10 AWG
Red Red Red Blue Blue Blue Blue Blue Yellow Yellow Yellow Yellow Yellow
#6 Stud #8 Stud #10 Stud #6 Stud #8 Stud #10 Stud 1/4” Stud 5/16” Stud #8 Stud #10 Stud 1/4” Stud 5/16” Stud 3/8” Stud
.80mm/.032” .80mm/.032” .80mm/.032” .80mm/.032” .80mm/.032” .80mm/.032” .80mm/.032” .80mm/.032” 1.0mm/.040” 1.0mm/.040” 1.0mm/.040” 1.0mm/.040” 1.0mm/.040”
Brazed Brazed Brazed Brazed Brazed Brazed Brazed Brazed Brazed Brazed Brazed Brazed Brazed
F25027
F25021
F25024
FOR ASSURANCE YOU CAN SEE, YOU CAN COUNT ON OPTISEAL
We Know MRO!
7
Custom Designed
Storage Systems to organize your supplies
FastServ can custom design a storage system to fit your needs. In addition, our planned inventory control systems help with parts organization, saving both time and money.
4060 E Plano Parkway | Plano, TX 75074 | 1-800-527-4126 | www.fastservsupply.com Copyright Š 2016 FastServ Supply FB250