DRILL ORGANIZATION
PREMIUM 140° SPLIT POINT DRILL SETS The rugged construction of the Wolverine was specifically designed for drilling harder alloy steels, including aluminum alloys, stainless steels and titanium alloys. Wolverine drills require constant pressure to begin drilling a hole and therefore perform much better in drill press and lathe applications. When using hand drills with Wolverine drill bits, more pressure may be needed when starting the hole than with a typical 135° split point drill. However, once the hole is started, you will see superior performance in the 140° drill.
www.fastservsupply.com
140 Split Point o
Once you try Wolverine's 140° Split Point Drill Bits you will never want to use anything else. With Wolverine’s premium quality and superb performance, you can drill with confidence. Wolverine’s unique 140° split point allows the bit to drill longer in harder materials and it’s 3 flats on the shank on 3/16” and longer prevent slipping in the chuck. The 140° split point’s main advantage is the large reduction in high end thrust and positive rake cutting edge extending to the center of the drill which makes the drill generate less heat, therefore lasting longer. The Wolverine has a heavy-duty web construction that promotes quick penetration at the point, longer cutting life and provides greater strength and rigidity which improves hole tolerances, resists deflection, permits higher feed rates and gives greater breakage resistance.
A
B 140
135
o
o
----------------------Stronger More Holes
FEATURES & BENEFITS • Wolverine is the only drill on the market to feature flats on the shank of a jobber length drill.
More Brittle Easier Start
Cutting Edge in Red
• Each Wolverine is manufactured from a premium grade of M-2N Molybdenum high speed steel and has a black and bronze surface for maximum lubricity. • The Wolverine also has a super hard Nitride surface treatment which increases the Rockwell Hardness without increasing brittleness, improves drill life and productivity.
------------
140
------------
o
Split Point
SPECIFICATIONS
135
o
Split Point
POINT: The Wolverine 140° Split Point’s main advantage is the large reduction in high end thrust and a positive rake cutting edge extending to the center of the drill, which makes the drill generate less heat and therefore last longer. In many materials this point will act as a chip breaker to produce small chips which can be readily ejected through flutes, also making the drill cut cooler.
140°
WEB: The Wolverine has a heavy-duty web construction that promotes quick penetration at the point, longer cutting life and provides greater strength and rigidity which improves hole tolerances, resists deflection, permits higher feed rates and gives greater breakage resistance.
FLUTE: The Wolverine has a wide flute that enhances chip removal, reduces drill retractions (woodpeckering), and improves coolant flow to the point.
BODY: The Wolverine is manufactured from a premium grade of M-2N Molybdenum High Speed Steel, which has a high vanadium content.
58-PIECE 140° SPLIT POINT DRILL SET JOBBER LENGTH SET WITH DRILL DISPENSER
29-PIECE 140° SPLIT POINT DRILL SET JOBBER LENGTH SET WITH METAL INDEX
29-PIECE 140° SPLIT POINT DRILL SET JOBBER LENGTH SET WITH PLASTIC INDEX
Part No.
Part No.
Part No.
F62983
F62808
F62809
www.fastservsupply.com