292
FiberConnect® Easy Pull
Fiber optic cables (SM / MM)
Installation aid system for fiber numbers from 1 to 32
Easy Pull B1
Easy Pull E1
Easy Pull E1 / Easy Pull B1 Easy Pull E1
Fanout
The installation system can be used for assemblies with up to
The fanout specially developed for the Easy Pull E1 system cont-
four single fibers. The connectors are optimally protected against
ains no metal and is especially sturdy despite its low weight.
damage during installation (in accordance with protection class Its design means that the wall bushings needed during
IP20) and pulling in the cables is made much easier.
installation are only marginally larger than the divider itself. Once the cables have been pulled in, the installation protection
All that is needed to remove the installation protection is a
can be easily removed and the connectors can be joined to the
sharp knife and a cutting pliers.
adapters or transceivers as usual at the destination. Gauging the assembly in the plant is an integral part of the delivery package
09
new
Easy Pull B1 Now available: the installation aid system Easy Pull B1. Thinner and more compact compared to Easy Pull E1,
for assemblies with one connector only. With flexible loop for easy installation in narrower ducts. Can remain on cable after installation for further use if required Number of fibers n
1
Min. bending radius of cable
as per cable datasheet
Min. bending radius buffered fiber/whip Min. hole Ø for through-feeds with cabinets and walls Max. pull force on tool
2
3
—
30 mm
30 mm
*
30 mm
30 mm
200 N
500 N
600 N
* depending on connector type
www.leoni-fiber-optics.com
FiberConnect®
FiberTech ®
FiberSwitch ®
FiberSplit®
Easy Pull
293
Here you can find the corresponding cable:
Fiber optic cables (SM / MM)
Chapter 08 | PCF Chapter 09 | Fiber optic cables
Pull tool
Divider
Easy Pull E2
Pull tool with loop
Easy Pull E2 Description
Properties
This installation system can be used to protect assemblies with
Q
made from PA 6, with pulling eye
up to 32 single fibers (with IP54 protection). The protective conduit can be easily unlatched and removed after pulling in. The
Q
Cable gland can be used for quick and secure fixing in control cabinets and boxes
connectors can be joined to adapters or transceivers as normal. Gauging the assembly in the plant is an integral part of the deli-
Sturdy, watertight, flexible and UV-resistant protective conduit
Q
Torsion-free removal of the protective conduit for protecting the connector
very package. Q
With more than two fibers, the individual whips are graduated in accordance with the customer's requirements
Fanout The fanout specially developed for the Easy Pull E2 system contains no metal and is especially sturdy despite its low weight. The installation protection is splashproof and offers good pro-
09
tection against mechanical damage. The high flexibility permits trouble-free installation, even under difficult conditions. The installation protection can be removed without any tools.
Number of fibers n
2
4
5 to 12
13 to 32
acc. to cable datasheet
Min. bending radius of cable Min. bending radius buffered fiber/whip
30 mm
30 mm
30 mm
30 mm
Outer Ø fanout element
14 mm
14 mm
21 mm
30 mm
Resistance to apex pressure (protective conduit)
350 N
350 N
350 N
350 N
Max. pull force on tool
500 N
500 N
600 N
600 N
M20 (PG13.5)
M25 (PG21)
M25 (PG21)
M50 (PG36)
Outer Ø of protective conduit
20 mm
30 mm
30 mm
55 mm
Min. hole Ø for throughfeeds with cabinets and walls
35 mm
40 mm
45 mm
60 mm
PG gland
Material (protective conduit)
www.leoni-fiber-optics.com
PA 6 (flame-retardant / halogen-free / UV-stable)