HP 20 available to the rotor HP 31 max to hydraulic motor
HYDRAULIC REACH MOWERS
new GROUP
A Tubular arms H.T.R. Two independent hydraulic systems Tubular arms H.T.R.
Tubular arms H.T.R. (High Torsion Resistance)
Polypropylene oil tank
Drop forged brackets for the arms
Inner lining
Reversible rotor by cable
Adjustable rear roller
Drop forged parts
Cable controls
Mechanical breakaway
Monolever electric control
Floating head system
HP Tractor
Mechanical breakaway
Min. tractor weight Kg
Min. tractor width m
T 380D Smart
1700
1,50
T 430D Smart
2000
1,70
T 430DR Smart
2000
1,70
40
50
60
70
F
Working positions (m) m
3,84
4,33
B
m
2,43
2,91
C
m
0,88
1,21
D
m
2,25
2,55
E
m
4,21
4,70
F
m
1,15
0,88
G
m
1,54
1,71
H
m
3,41
3,90
H
Developed in collaboration with:
A
D
The polypropylene oil tank is separated from the frame and allows it to be isolated from any structural stress. Fully recyclable.
T 430D
E
Oil cooler with thermostat (option)
T 380D
G A
C
I
Technical data Model
Max horizontal reach*
Weight
Oil
Rotor
Pto
Flail head angle
m
Kg
l
Rpm
MAX Rpm
T380D Smart
3,84
490
70
3.000
540
235°
T430D Smart
4,33
495
70
3.000
540
235°
* Reach measured from tractor centre line to head edge.
Equipped with:
Flail Head
Machines with cable controls “Classic”
FLOATING head system
Code
Model
SM38LSFDO10V
T380D Smart with flail head TID100 m 1,00
Totally independent hydraulic system
SM43LSFDO10V
T430D Smart with flail head TID100 m 1,00
Tubular arms H.T.R. (High Torsion Resistance) Drop forged brackets for the arms
Machines with electric controls “Electra” Code
Model
SM38LSCDO10V
T380D Smart with flail head TID100 m 1,00
SM43LSCDO10V
T430D Smart with flail head TID100 m 1,00
Mechanical breakaway (arm protection in case of obstacles) Reversible rotor by cable Front and rear abrasion resistant guard for flail head
Option Code
Lenght (cm)
TST5017
(640-890)
Stabilizers to the tractor
(640-890)
Stabilizers for “Delta yoke”
“Delta yoke” for stabilizers
TD3703 TGA4611
Oil and Pto shaft
T43003
Oil cooler with thermostat
T43004
Lift float (LFA mechanic)
Flail head
TID100
Width (m)
1,00
Rotor speed (rpm)
3000
Blade tip speed (m/sec)
60
Flail head angle
190°
Weight (Kg)
129
new TID100
Direct drive
Flails TID100 Interchangeable on the same rotor Bootie blades for: grass, hedges, bushes Ø max 2 cm
Multi-use and straight blades for: grass, shrubs, bushes, sticks, wood Ø max 3 cm
Articulated “Y“ flails for: grass and bushes Ø max 2 cm
Cod. 0901158 + Cod. 0901159
Cod. 0901049
Cod. 0901138
n° 36+18
n° 36
n° 18
Standard
Warning IT IS RECOMMENDED that the connection between tractor and shredder and its setting up should be made with the Dealer according the instructions and warnings listed on our Use and Maintenance Manual. For further information please contact our after sales service.
FERRI srl - Via Govoni, 30 - 44034 Tamara (FE) Italy - Tel. +39 0532 866866 - Fax +39 0532 866851 - info@ferrisrl.it - www.ferrisrl.it Spare parts: Tel: +39 0532 866993 - Fax: +39 0532 867061 - e-mail: parts@ferrisrl.it After Sales Service: Tel: +39 0532 866991 - Fax: +39 0532 866851 - e-mail: service@ferrisrl.it