T460
HP 29 available to the rotor HP 32 max to hydraulic motor
HYDRAULIC REACH MOWERS GROUP
A Two independent hydraulic systems
Floating head system
Inner lining Mechanical breakaway
Mechanical breakaway (arm protection in case of obstacles)
Reversible rotor by cable
Adjustable rear roller
Polypropylene oil tank
Group 3 cast iron hydraulic rotor pump
The polypropylene oil tank is separated from the frame and allows it to be isolated from any structural stress. Fully recyclable.
Cable controls
Developed in collaboration with:
Cast iron hydraulic rotor pump group 3 HP Tractor
50
60
T460 Smart
Min. tractor weight Kg
Min. tractor width m
2200
1,80
Working positions (m) T460 Smart m
4,56
B
m
3,05
C
m
1,15
D
m
2,66
E
m
4,91
F
m
0,95
G
m
1,65
m
4,16
I
m
0,22
H
H
D
E
A
F
C G B
A
Technical data Model
T460 Smart
Max horizontal reach*
Weight
Oil
Rotor
Pto
m
Kg
l
Rpm
MAX Rpm
4,56
568
120
3.100
540
Flail head angle
190°
* Reach measured from tractor centre line to head edge.
Equipped with:
Machines with cable controls “Classic”
Flail Head
Model
FLOATING head system
T460 Smart with flail head TID100 m 1,00
Totally independent hydraulic system
Completing equipment to the base machine at extra charge
Cast iron hydraulic rotor pump group 3
WARNING: due to the high offset loads on the linkages it is necessary to fit two stabilizers
Cast iron motor (TID)
Code
Lenght cm
TST5017
(640-890)
Mechanical breakaway (arm protection in case of obstacles)
Stabilizers to the tractor “Delta yoke” for stabilizers
0PT001121000 TGA4611
(640-890)
Stabilizers for “Delta yoke”
Reversible rotor by cable
TGA5014
(340-460)
Top link stabilizer
Front guard with flaps and rear abrasion resistant guard (TID)
Option
Oil and Pto shaft
Code
TM46002
Oil cooler with thermostat
TM46003
Lift float (LFA mechanic)
TM46008
Bumpers with illumination system
Flail head
TID100
Width (m)
1,00
Rotor speed (rpm)
3000
Blade tip speed (m/sec)
60
Flail head angle
190°
Weight (Kg)
129
new TID100
Direct drive
Flails TID100 Interchangeable on the same rotor Multi-use and straight blades for: grass, shrubs, bushes, sticks, wood Ø max 3 cm
Articulated “Y“ flails for: grass and bushes Ø max 2 cm
Bootie blades for: grass, hedges, bushes Ø max 2 cm
Cod. 0901158 + Cod. 0901159
Cod. 0901049
Cod. 0901138
n° 36+18
n° 36
n° 18
Standard
Warning IT IS RECOMMENDED that the connection between tractor and shredder and its setting up should be made with the Dealer according the instructions and warnings listed on our Use and Maintenance Manual. For further information please contact our after sales service.
FERRI srl - Via Govoni, 30 - 44034 Tamara (FE) Italy - Tel. +39 0532 866866 - Fax +39 0532 866851 - info@ferrisrl.it - www.ferrisrl.it Spare parts: Tel: +39 0532 866993 - Fax: +39 0532 867061 - e-mail: parts@ferrisrl.it After Sales Service: Tel: +39 0532 866991 - Fax: +39 0532 866851 - e-mail: service@ferrisrl.it