LED CANOPY LIGHTS INSTALLATION FOR GAS STATION
It is a gas station where people prefer to stop by and relax for a while before hitting the road again, it is important for you to make the atmosphere welcoming. The right kind of lighting that makes space look safe and relaxing is what makes the real difference
SCROLL DOWN
 INDEX Why Does a Gas Station need LED canopy lights? How many canopy lights will a gas station need? How to install LED canopy lights in a gas station? What are the underlying benefits of using LED canopy lights? Thank you!
Why Does a Gas Station need LED canopy lights? In general, gas stations stay open late into the night. Thus, one must make sure that the customers or the general public that may pass through the area must feel safe. Also, the lights must be robust enough to withstand the wear and tear throughout the long operational hours. LED canopy lights offer a rating for 3,00,00 to 5,00,00 operations hours. Thus, these are the best choice for a gas-station lighting project. LED lights do not cause electromagnetic interference. Thus, these are ideal for places like gas stations and other places that prohibit the use of devices that put out harmful frequencies.
How many canopy lights will a gas station need? The number of LED canopy lights that you will need to install in a gas station to achieve adequate levels of illumination depends on the area of the space. The number of lights can increase or decrease, depending on the lumen output provided by the lighting fixture. Consider a standard 3,600 square feet gas station with 5-meter high canopy • If you choose a 45W LED canopy light that provides an output of 5275 lumens. • Also, the LED’s beam angle is 160 degrees. • Then, its lux will be 41, and the beam width will be 56.71 meters. • According to the Illumination Engineering Society (IES), the standard lux value for open areas (like a gas station) is 1000. • Thus, you will need about twenty-four 45W LED canopy lights for the ideal Gas Station Lighting
GAS STATION
Consider a standard 3,600 square feet gas station
5-METER HIGH CANOPY
How to install LED canopy lights in a gas station? The image that follows shows the step-by-step process for LED canopy light installation. Before starting with the actual installation process, make sure to pull down the mains to disconnect the power supply. Avoid touching any wiring with bare hands. Always use a wire cutter to handle the wiring. Join and seal all wire connections with connector locks or industrygrade wire tape.
LEDMyplace tel: 815-697-5223 www.ledmyplace.com
THANKS FOR ATTENTION Designed to help you light up your gas station, canopy, car wash, and convenience store better, LED Canopy Lights are reasonably priced at LEDMyPlace your favorite online portal for LED lighting requirements.