3F Filippi "General catalogue 2016" by 3F Filippi S.p.A.

General Catalogue 2016 www.3f-filippi.com

Usage instructions How to use the 2016 General Catalogue To facilitate using our catalogue, a new page layout is being introduced with this new version to help reading and simplify consultation. We will see in detail how: New for 2016 New product ranges are highlighted in red and have NEW beside them.

Series presentation page

Descriptions, articles, codes and prices

Legend

In this section the product series are presented, with the characteristics and concepts common to the various versions specified.

In these pages, all products are presented, divided by code, article and price. The specific accessories for the version are also specified. Accessories common to the whole series are grouped in a page at the end of the series.

This appendix helps understand the information given in the catalogue’s pages. It contains the key to the symbols and codes used and a summary. It is part of the back cover and opens out.

How to interpret our product Articles Consulting our product Articles could not be simpler – here’s how:

L 324x14 T5 HF 2M Product family

Number of light sources

Source power

Tipe of source

Tipe of wiring

Other characteristics For example louvres, starters, emergency wiring...

Product range Surface luminaires and suspensions Page 8

New

3F Zeta

Page 88

New

Fly2

New

Page 16

Page 26

Page 28

Page 34

Page 42

3F Petra

3F Drop

Mira

3F Canda

3F Travetta

Filigare

Page 98

Page 108

Page 112

P 200

Zero 3F

3F Quadro

Page 184

Page 190

Page 192

L 390

New

Page 65

New

Page 114

Barraluce P

Recessed luminaires New

Page 126

Page 134

Page 140

Page 154

Lucequadro

Galassia

3F Dodeca

L 320

L 350

L 350 Fluo R90

Page 198

Page 204

Page 208

Page 216

Page 224

Page 228

L 400

L 450

L 560

L 580

L 590

Barraluce L

New

Systems Page 240

3F Linux

New

Page 262

Binario 3F

New

Page 270

3F Rocket

New

Page 275

New

3F Fil

This “2016 General Catalogue” is an informative product which is distributed free of charge. While all efforts have been taken to ensure the accuracy of its contents, 3F Filippi shall not under any circumstances be held liable for errors, omissions, interruptions or delays concerning the information provided in the Catalogue, or for any resulting damage. The data listed in this Catalogue may be approximate: please visit our website at www.3f-filippi.com or contact our Sales network to check for any updates. As 3F Filippi S.p.A. are constantly striving to improve our products, we reserve the right to modify the contents of this publication and the technical specifications of products contained herein without prior notice.

Product range Waterproof and corrosion-proof Page 284

New

Page 304

New

3F Linda

3F LEM

Page 338

Page 370

Page 378

Beta A3F - i3F

Beta 430

3F Cub

Specific applications Page 392

New

3F 66

Page 394

New

3F FS

Page 396

New

3F Metro

Page 398

3F1

Healthcare applications Page 404

Page 406

Page 408

3F Relax

LUCECURA

3Fine Germicide

Light Management Page 414

Page 418

Page 420

Page 428

Page 432

Page 433

3F Easy Dim

3F Sensor

3F Smart Dimming

3F HCL

3F & KNX

3F CLO

Page 436

Page 446

Page 460

Page 467

Page 471

3F LED Technology

Lighting engineering

Electrical engineering and Electronics

Mechanics

Analytical guide

Infopoint

3F Filippi, the company

Main Headquarters - Via del Savena Plant, Pian di Macina (Bologna, Italy)

3F Filippi 3F Filippi S.p.A. has been active in the lighting engineering field for more than 60 years, with extensive experience in the design and manufacture of technically efficient lighting systems. An ISO 9001-certified company for technical lighting design, we work together with the best technical lighting designers to provide our customers with quality lighting in line with the latest regulations and which guarantees the best performance, especially in the industrial, commercial and service sectors, also providing customised solutions.

Headquarters in Via Garganelli, Pian di Macina (Bologna, Italy)

3F Filippi, the company In the 1990s the Dogana delle Filigare customs outpost, known in antiquity as the commercial outpost of the Grand Duke of Tuscany, was purchased. 3F Filippi restored it completely, making it a meeting place to present new lighting products to architects, project managers and designers and organise conventions and training courses.

Convention Centre - Dogana delle Filigare in Firenzuola (near Florence, Italy)

3F Filippi operates in more than 50 countries, through a sales network composed of regional and foreign offices: in addition to having our own regional branches and subsidiaries in Italy, the company also markets its products in Europe, Latin America, Asia and Oceania. Facilities also include warehouses for the storage of raw materials, semi-finished and finished products, allowing for optimised delivery times and shipping of equipment to customer depots, using the fleet of company vehicles.

Datasheets, product updates and specifications on our website: www.3f-filippi.com

We bring the highest quality to light We have been giving our best in our work each day since 1952

For 3F Filippi, the right product comes about above all by comparing and carefully analysing customer tastes and requirements: for this reason we focus on attention to detail and quality materials to create lighting with a technical spirit which is able to make the most of all it illuminates. Our products are made with a craftsman's passion, constant innovation and attention to detail in their design: they combine form and function, experience with new technology, ease of maintenance and reliability with excellent value for money. All 3F Filippi's products – produced internally, thus reducing transport – are made at our Pian di Macina plant: from the moulding of plastic and metal parts to machining of profile sections and automatic welding, completely automated painting and assembly. The thoroughness and precision of our checks guarantee constant quality for all our products over time.

We illuminate your world Commerce Offices

Hospitals

Industrial

Transport Common areas

3F Filippi lights different locations in innovative ways. Our products bring light to passengers on trains and underground railways, patients in hospitals, customers in shops and malls and workers in offices and banks. 3F Filippi helps some of the most prestigious manufacturers show off their products and some of the most important museums and art galleries in Europe light their treasures. Wherever they are installed, 3F Filippi products always guarantee the highest quality and performance standards.

We bring the highest quality to light We Protect your Light The desire to preserve environmental resources has led 3F Filippi to collaborate with the best lighting designers to research and develop new solutions for high-quality, high-efficiency lighting. This research is performed using the highest quality materials and industrial processes which provide longer lifespans, components which comply with the latest standards and legislation, and intelligent wiring to maximise savings. 3F Filippi works with LightingEurope to develop increasingly advanced products which meet European and worldwide standards. A supporting member of the GreenLight Programme (launched by the European Commission in order to reduce energy consumption), 3F Filippi carries out education campaigns to improve lighting efficiency in public and private industrial applications.

Quality in the Spotlight 3F Filippi is an ISO 9001-certified company. Photometric tests are performed by internal laboratories to satisfy EN 13032 and CIE 121 standards. Our flow recuperators are developed with the use of custom software which allows us to obtain maximum efficiency and light distribution which best meets the customer's needs. This commitment has been recognised and certified by CSQ (Italian Certification of Company Quality Systems), also as regards the entire lighting engineering process. Moreover, 3F Filippi is a member of ASSIL (National Association of Lighting Manufacturers), and a partner and supporter of IES (Illuminating Engineering Society of North America) and AIDI (Italian Lighting Association).

Light for Projects Can a luminaire contain high-quality components, be well designed and built to quality standards which meet the most stringent European and international safety, operational and sustainability standards? Yes, as long as it is made by 3F Filippi! Our product lines cover a wide range of interior and exterior applications: from compact decorative, suspended and recessed luminaires to lighting systems for specific applications for hospitals or rail tunnels. High-efficiency flow recuperators and louvres, dimmable electronic wiring, made-to-measure luminaires for electronic ballasts and efficient sources – all these components maximise energy savings and provide optimum visual comfort, also in combination with light or presence sensors.

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Surface luminaires and Suspensions Page

Product

3F Zeta

Source

Ceiling

LED

•

Semirecessed

Suspended

Wall

•

New 3F Zeta L

New 3F Zeta D

LED

•

New 3F Zeta DR

LED

•

3F Petra

3F Petra LED

LED

•

3F Petra LED Sensor

LED

•

3F Petra Fluo

Fluo

•

3F Petra Suspended Fluo

Fluo

•

3F Drop

LED

•

Mira

Mira Wall LED

LED

•

Mira Wall Fluo

Fluo

•

3F Canda

3F Canda Quadrato LED

LED

•

3F Canda Fluo

Fluo

•

3F Travetta

3F Travetta LED

LED

•

• •

•

New 3F Travetta LED DI

LED

New 3F Travetta LED HCL

LED

•

3F Travetta Fluo

Fluo

•

3F Travetta DI Fluo

Fluo

Filigare

New Filigare 180 LED

LED

•

Filigare 180 Fluo

Fluo

•

Filigare 220 Fluo

Fluo

•

Fly2

88 90

Fly2 LED New Fly2 Free-standing LED

• • •

LED

•

LED

•

Fly2 Fluo

P 200

P 200 LED

102

P 200 Fluo

Fluo

•

106

P 200 Fluo IP54

Fluo

•

108

Zero 3F

108

Zero 3F LED

LED

•

110

Zero 3F Fluo

Fluo

•

112

3F Quadro LED

•

112

New 3F Quadro LED

Fluo

LED

Floor

•

114

Barraluce P

114

Barraluce P LED

LED

•

118

Barraluce P Opal Fluo

Fluo

•

120

Barraluce P 2MG Fluo

Fluo

•

• 7

Surface luminaires and suspensions

News and updates available on: www.3f-filippi.com > Products > Surface luminaires and suspensions

New

3F Zeta L LED luminaire for high energy efficiency systems

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics Wide direct distribution. Lifetime (L90/B10): 30000 h. (Tp 60°C) Lifetime (L85/B10): 50000 h. (Tp 60°C) Lifetime (L75/B10): 80000 h. (Tp 60°C) Photobiological safety RG0 unlimited, risk absent, in compliance with IEC 62471, IEC/TR 62778.

• LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3.

Environments: architectural, commercial, transit areas, cornices, boards.

Mechanical characteristics Housing in hot-galvanized steel, painted in white polyester, obtained through rolling process. Saline-mist resistance equal to 500hrs and damp resistance equal to 700hrs. Light unit in hot-galvanized steel, painted in white polyester base with fixing springs and retractable safety hooks in stainless steel. End caps in white polycarbonate. Stainless steel mounting brackets with anti-slip screws.

On request • different powers or colour temperatures • housing and accessories in RAL colours • wiring: dimmable, emergency (605 mm long versions excluded)

Accessories Accessories on page 14.

Electrical characteristics Electronic wiring 230V-50/60Hz. Dimensions

H A

Surface luminaires and suspensions

3F Zeta L 3F Zeta L Code 10892

Lenses for wide distribution, in transparent PMMA with external flat surface.

E=100% Code

Item

Electronic 10894 New 3F Zeta L 15 LED L605

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

2462

605x62x67

New

3F Zeta L 30 LED L1194

4924

1194x62x67

10892 New

3F Zeta L 40 LED L1489

6155

1489x62x67

10893

Datasheets, product updates and specifications on our website: www.3f-filippi.com

New

3F Zeta D LED luminaire for high energy efficiency systems

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics Diffused symmetric distribution. Lifetime (L90/B10): 30000 h. (Tp 60°C) Lifetime (L85/B10): 50000 h. (Tp 60°C) Lifetime (L75/B10): 80000 h. (Tp 60°C) Photobiological safety RG0 unlimited, risk absent, in compliance with IEC 62471, IEC/TR 62778.

• Linear LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3.

Environments: architectural, commercial, transit areas, cornices, large mirrors, boards.

Mechanical characteristics Housing in hot-galvanized steel, painted in white polyester, obtained through rolling process. Saline-mist resistance equal to 500hrs and damp resistance equal to 700hrs. Light unit in hot-galvanized steel, painted in white polyester base with fixing springs and retractable safety hooks in stainless steel. Curved screen in self-extinguishing polycarbonate, UV stabilized, opal, with smooth outer surface. End caps in white polycarbonate. Stainless steel mounting brackets with anti-slip screws.

On request • different powers or colour temperatures • housing and accessories in different RAL colours • wiring: dimmable, emergency (605 mm long versions excluded)

Accessories Accessories on page 14.

Dimensions Electrical characteristics Electronic wiring 230V-50/60Hz. H A

Surface luminaires and suspensions

3F Zeta D 3F Zeta D Code 10873

Curved opal polycarbonate diffuser.

E=100% Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

1172

605x62x81

3F Zeta D 1x18 LED L1194

2345

1194x62x81

3F Zeta D 2x9 LED L605

2345

605x62x81

New

3F Zeta D 1x22 LED L1489

2929

1489x62x81

10874 New

3F Zeta D 2x18 LED L1194

4689

1194x62x81

New

3F Zeta D 2x22 LED L1489

5859

1489x62x81

Electronic 10872 New 3F Zeta D 1x9 LED L605 10871

New

10875 New 10870 10873

Datasheets, product updates and specifications on our website: www.3f-filippi.com

New

3F Zeta DR LED luminaire for high energy efficiency systems

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics Symmetric and asymmetric lighting distribution. Lifetime (L90/B10): 30000 h. (Tp 60°C) Lifetime (L85/B10): 50000 h. (Tp 60°C) Lifetime (L75/B10): 80000 h. (Tp 60°C) Photobiological safety RG0 unlimited, risk absent, in compliance with IEC 62471, IEC/TR 62778.

• Linear LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3.

Environments: architectural, commercial, transit areas, cornices, large mirrors, boards.

Mechanical characteristics Housing in hot-galvanized steel, painted in white polyester, obtained through rolling process. Saline-mist resistance equal to 500hrs and damp resistance equal to 700hrs. Light unit in hot-galvanized steel, painted in white polyester base with fixing springs and retractable safety hooks in stainless steel. Rectangular screen in self-extinguishing polycarbonate, UV stabilized, opal, with smooth outer surface. End caps in white polycarbonate. Stainless steel mounting brackets with anti-slip screws.

On request • different powers or colour temperatures • housing and accessories in different RAL colours • wiring: dimmable, emergency (605 mm long versions excluded)

Accessories Accessories on page 14.

Dimensions

Electrical characteristics Electronic wiring 230V-50/60Hz.

H A

Surface luminaires and suspensions

3F Zeta DR 3F Zeta DR Code 10880

Rectangular opal polycarbonate diffuser.

E=100% Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

1175

605x62x81

3F Zeta DR 1x18 LED L1194

2351

1194x62x81

3F Zeta DR 2x9 LED L605

2351

605x62x81

New

3F Zeta DR 1x22 LED L1489

2938

1489x62x81

10881 New

3F Zeta DR 2x18 LED L1194

4701

1194x62x81

New

3F Zeta DR 2x22 LED L1489

5874

1489x62x81

Electronic 10879 New 3F Zeta DR 1x9 LED L605 10878

New

10882 New 10877 10880

3F Zeta DR AS Code 10887

Rectangular opal polycarbonate diffuser.

E=100% Code

Item

Electronic 10886 New 3F Zeta DR AS 1x30 LED L1489 10887

New

3F Zeta DR AS 2x22 LED L1489

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

3912

1489x62x81

6208

1489x62x81

3F Zeta Accessories Suspensions with regulator, galvanized steel cable 1.5 mm diameter, load 15 kg. Code

Item

A0660 New

Suspension with adjustment for 3F Zeta - 1m

A0661 New

Suspension with adjustment for 3F Zeta - 2 m

A0662 New

Suspension with adjustment for 3F Zeta - 3 m

A0663 New

Suspension with adjustment for 3F Zeta - 4 m

A0664 New

Suspension with adjustment for 3F Zeta - 5 m

A0665 New

Suspension with adjustment for 3F Zeta - 6 m

Hook to suspended luminaires to a chain. Code

Item

A20452 New

Stainless steel hook for chain

Caddy hook to create a point from which to suspend the system or the loads to false ceilings with visible profiles. Code

Item

A02562

Caddy for exposed profiles of 24 mm

To be installed on exposed profiles (width 24 mm) of false ceilings. We recommend reinforcing the false-ceiling fixing at the point where the Caddy is to be installed. Supplied complete with nut and washer. The suspension must be purchased separately.

Surface luminaires and suspensions

3F Petra LED LED luminaire for high energy efficiency systems and high visual comfort

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics Diffuse distribution. Lifetime (L90/B10): 30000 h. (Tp 60°C) Lifetime (L85/B10): 50000 h. (Tp 60°C) Photobiological safety RG0, risk absent, in compliance with IEC 62471.

• Circular LED module, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3.

Environments: architectural, transit areas, lobbies or waiting rooms, stairwells. Environments where ceiling indirect lighting and direct lighting supply a visual comfort. Virtually in all environments compatibly with the use of any chemicals which could compromise the use of plastic materials. Completely insect and dust proof.

Mechanical characteristics Housing in self-extinguishing V2 polycarbonate, UV stabilized, injection moulded, glazed. Ecologic anti-aging injected sealing gasket. Diffuser in opal PMMA, injection moulded. Gear-tray reflector unit in aluminium, painted in white polyester, fixed to the housing by quick-fastening steel devices, hinged opening. Snug fit snap-lock clips for diffuser mounting, in transparent polycarbonate, tamper-proof opening. Electrical characteristics Electronic wiring 230V-50/60Hz. Entry for power-supply cable at the top (by means of doublemembrane sealing grommet) or from the side after drilling. In compliance with EN 60598-1.

On request • wiring: dimmable, EP or ENP mantained emergency, 1hr duration, 24hrs recharge, for 380-620 version

Dimensions

Surface luminaires and suspensions

3F Petra LED 3F Petra LED Code 34330

E=100% Code

Item

Electronic 34229 3F Petra OP 300 12W LED

Absorbed power (W)

Output flux (lm)

Dimensions ØxH

1569

300x120

34330

3F Petra OP 380 22W LED

2839

380x117

34407

3F Petra OP 620 50W LED

5843

620x134

Datasheets, product updates and specifications on our website: www.3f-filippi.com

3F Petra LED Sensor LED luminaire for high energy efficiency systems and high visual comfort

Construction characteristics

Source characteristics

Applications

• Circular LED module, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3.

On request • 3F Petra OP 620 50W Sensor

Light Management For more information on 3F Sensor technology, refer to the specific chapter in the “Light Management” section.

Dimensions

Surface luminaires and suspensions

3F Petra LED Sensor 3F Petra LED Sensor Code 34334

E=100% Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions ØxH

Electronic 34233 3F Petra OP 300 12W LED Sensor

1569

300x120

34334

2839

380x117

3F Petra OP 380 22W LED Sensor

Datasheets, product updates and specifications on our website: www.3f-filippi.com

3F Petra Fluo Diffused distribution luminaire

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics Diffuse distribution.

• T5-R circular or compact fluorescent lamps, CCT nominal color temperature 4000 K, color rendering index CRI >80.

Environments: transit areas, lobbies or waiting rooms. Environments where soft diffuse light is required for optimal visual comfort. Virtually in all environments compatibly with the use of any chemicals which could compromise the use of plastic materials.

Mechanical characteristics Housing in self-extinguishing V2 polycarbonate, UV stabilized, injection moulded. Ecologic anti-aging injected sealing gasket. Diffuser injection moulded. Gear-tray reflector unit in hot-galvanised steel, painted in white polyester, fixed to the housing by means of steel rapid devices, hinged opening. Snug fit snap-lock clips for diffuser mounting, tamper-proof opening. Electrical characteristics EEI A2 electronic wiring, 230V-50/60Hz, lamp warm start. EEI B2 low loss starter wiring, 230V-50Hz, power factor correction, fuse, 0.5 mm² heat resistant wire HT 90°C. EP maintained emergency wiring on one single lamp, 1hr duration with 24hrs recharge, fuse. In compliance with EN 60598-2-22. Entry for power-supply cable at the top (by means of doublemembrane sealing grommet) or from the side after drilling.

On request • fuse accessory (on page 472) • wiring: twin-circuit, class II, different powers, version with E27 fitting for integrated compact electronic energysaving lamps • emergency inhibition

Dimensions

Surface luminaires and suspensions

3F Petra Fluo 3F Petra Opal Fluo Code 37970

Glazed polycarbonate housing. Diffuser in opal PMMA. Snap-lock clips in transparent polycarbonate.

E>55% Code

Item

EEI A2 electronic wiring - Lamps supplied 37859 3F Petra OP 300 1x22 T5-R LD HF IP64

Absorbed power (W)

Sources flux (lm)

Dimensions ØxH

1800

300x120

37969

3F Petra OP 380 1x22 T5-R LD HF IP64

1800

380x117

37864

3F Petra OP 300 1x26 CD LD HF IP64

1800

300x120

37970

3F Petra OP 380 1x40 T5-R LD HF IP64

3300

380x117

37979

3F Petra OP 380 2x26 CD LD HF IP64

3600

380x117

37941

3F Petra OP 620 1x40+1x60T5-RLDHFDA IP65

107

8300

620x134

1800

300x120

EP emergency, fuse - Lamps supplied 37884 3F Petra OP 300 1x22 T5-R LD HF EP IP64 37989

3F Petra OP 380 1x22 T5-R LD HF EP IP64

1800

380x117

37889

3F Petra OP 300 1x26 CD LD HF EP IP64

1800

300x120

37990

3F Petra OP 380 1x40 T5-R LD HF EP IP64

3300

380x117

37999

3F Petra OP 380 2x26 CD LD HF EP IP64

3600

380x117

3F Petra Melo Fluo Code 37928

Pomegranate polycarbonate housing. Diffuser in opal PMMA. Snap-lock clips in transparent polycarbonate.

E>60% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions ØxH

EEI A2 electronic wiring - Lamps supplied 35465 3F Petra ME OP 300 1x22 T5-R LD HF IP64

1800

300x120

37927

3F Petra ME OP 380 1x22 T5-R LD HF IP64

1800

380x117

37928

3F Petra ME OP 380 1x40 T5-R LD HF IP64

3300

380x117

Datasheets, product updates and specifications on our website: www.3f-filippi.com

3F Petra Fluo 3F Petra Transparent Fluo Code 35811

Transparent polycarbonate housing. Diffuser in self-extinguishing V2 transparent polycarbonate, UV stabilised, with smooth outside. Stainless steel clips. E>62% Code

Item

EEI A2 electronic wiring - Lamps supplied 35705 3F Petra Trasparente 300 1x26 CD LD HF

Absorbed power (W)

Sources flux (lm)

Dimensions ØxH

1800

300x120

35811

3F Petra Trasparente 380 1x40 T5-R LD HF

3300

380x117

35820

3F Petra Trasparente 380 2x26 CD LD HF

3600

380x117

34650

3F Petra Trasparente 620 4x26CD LD HF DA

106

7200

620x134

34653

3F Petra Tras.620 1x40+60 T5-R LD HF DA

107

8300

620x134

EP emergency, fuse - Lamps supplied 35730 3F Petra Trasparente 300 1x26 CD LD HF EP

1800

300x120

35831

3300

380x117

3F Petra Trasp 380 1x40 T5-R LD HF EP

35840

3F Petra Trasparente 380 2x26 CD LD HF EP

3600

380x117

34658

3F Petra Trasp 620 4x26 CD LD HF DA EP

106

7200

620x134

Surface luminaires and suspensions

3F Petra Fluo 3F Petra Grey Fluo Code 35211

Grey polycarbonate housing. Diffuser in self-extinguishing V2 transparent polycarbonate, UV stabilised, with smooth outside. Grey polycarbonate clips.

E>58% Code

Item

EEI A2 electronic wiring - Lamps supplied 35103 3F Petra GR 300 1x13 CD LD HF

Absorbed power (W)

Sources flux (lm)

Dimensions ØxH

900

300x120

35104

3F Petra GR 300 1x18 CD LD HF

1200

300x120

35100

3F Petra GR 300 1x22 T5-R LD HF

1800

300x120

35105

3F Petra GR 300 1x26 CD LD HF

1800

300x120

35108

3F Petra GR 300 2x13 CD LD HF

1800

300x120

35205

3F Petra GR 380 1x32 LD HF

2250

380x117

35219

3F Petra GR 380 2x18 CD LD HF

2400

380x117

35211

3F Petra GR 380 1x40 T5-R LD HF

3300

380x117

35220

3F Petra GR 380 2x26 CD LD HF

3600

380x117

EP emergency, fuse - Lamps supplied 35125 3F Petra GR 300 1x22 T5-R LD HF EP

1800

300x120

35130

1800

300x120

3F Petra GR 300 1x26 CD LD HF EP

35207

3F Petra GR 380 1x32 LD HF EP

2250

380x117

35231

3F Petra GR 380 1x40 T5-R LD HF EP

3300

380x117

35240

3F Petra GR 380 2x26 CD LD HF EP

3600

380x117

1250

300x120

Starter EEI B2, fuse - Lamps supplied 35050 3F Petra GR 300 1x22 LD

Datasheets, product updates and specifications on our website: www.3f-filippi.com

3F Petra Suspended Fluo Suspended luminaire high visual comfort

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics Diffuse distribution.

• T5-R circular fluorescent lamps, CCT nominal color temperature 4000 K, color rendering index CRI >80.

Environments: transit areas, great halls. Environments where ceiling indirect lighting and direct lighting supply a visual comfort. Virtually in all environments compatibly with the use of any chemicals which could compromise the use of plastic materials. Completely insect and dust proof.

Mechanical characteristics Housing in glazed self-extinguishing V2 polycarbonate, UV stabilised, injection moulded. Ecologic anti-aging injected sealing gasket. Diffuser in opal PMMA, injection moulded. Gear-tray reflector unit in hot-galvanised steel, painted in white polyester, fixed to the housing by means of steel rapid devices, hinged opening. Snug fit snap-lock clips for diffuser mounting, in transparent polycarbonate, tamper-proof opening. Adjustable suspension with Rose in white polycarbonate, with stainless steel cables, 2 m long. Electrical characteristics EEI A2 electronic wiring, 230V-50/60Hz, lamp warm start. Twin-circuit. Entry for power-supply cable at the top by means of double-membrane sealing grommet, or side-entry after drilling. Transparent 5x1.5 mm² power-supply cable. In compliance with EN 60598-1.

On request • compact lamps • polycarbonate diffuser • fuse accessory (on page 472) • wiring: dimmable, class II

Dimensions

H Ø

Surface luminaires and suspensions

3F Petra Suspended Fluo 3F Petra Suspended Code 34345

E>60% Code

Item

EEI A2 electronic wiring - Lamps supplied 34345 3F Petra OP 620 1x40+1x60 T5-R LDHFDA SO

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Absorbed power (W)

Sources flux (lm)

Dimensions ØxH

107

8300

620x134

3F Drop LED pendant luminaire for energy-efficient systems

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics Direct symmetric distribution. Lifetime (L90/B10): 30000 h. (Tp 65°C) Lifetime (L85/B10): 50000 h. (Tp 65°C) Photobiological safety RG0, risk absent, in compliance with IEC 62471.

Compact LED module, CCT nominal color temperature 4000 K, color rendering index CRI >80. Color initial tolerance (MacAdam): 3. Zhaga Book 3 compliant.

Environments: commercial, exhibition areas, for food service, transit areas, lobbies or waiting rooms, corridors, halls, shops, display windows.

Mechanical characteristics Cylindrical aluminum body painted bonderized RAL 9006 metallic gray. Parabolic louvre in polished anodised aluminium, anti-glare, non-iridescent. Circular anti-glare LED shielding lens in transparent prismatic PMMA for good visual comfort. Passive heat dissipator in anodised aluminium, oversized, for optimum thermal management of the LED module. Electrical characteristics Electronic wiring 230V-50/60Hz. In compliance with EN 60598-1.

On request • LED module, CCT nominal color temperature 3000 K, color rendering index CRI >90 • housing in RAL colour • wiring: dimmable

Accessories Accessories (always necessary) on page 27.

Dimensions

Surface luminaires and suspensions

3F Drop 3F Drop Code 37507

E=100% Code

Item

Electronic 37507 3F Drop LED GR 3000

Absorbed power (W)

Output flux (lm)

Dimensions ØxH

27.5

2471

150x228

Accessories Suspension (always needed) composed by: polycarbonate ceiling white rose Ø 110 mm, stainless steel cable Ø 1,25 mm (length 1 m), quick adjuster, transparent power cable 3x1,5 mm² (length 2 m).

Code

Item

A01457

Susp with Rose 110 Adj 1m Cable 2m

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Mira Wall LED LED luminaire wall energy-efficient systems

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics Asymmetric indirect distribution. Lifetime (L90/B10): 30000 h. (Tp 60°C) Lifetime (L85/B10): 50000 h. (Tp 60°C) Lifetime (L75/B10): 80000 h. (Tp 60°C) Photobiological safety RG0 unlimited, risk absent, in compliance with IEC 62471, IEC/TR 62778.

• Linear LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3.

Environments: with VDTs, meeting rooms, offices. Environments: transit areas, lobbies or waiting rooms, corridors, stairwells. Environments where soft diffuse light is required for optimal visual comfort.

Mechanical characteristics Housing in white painted steel. Flow recuperator in specular aluminium with superficial titanium-magnesium treatment.

On request

Installation

• housing in RAL colour • wiring: dimmable

Wall installation.

Accessories Accessories on page 32.

Electrical characteristics Electronic wiring 230V-50/60Hz. In compliance with EN 60598-1.

Dimensions

H A

Surface luminaires and suspensions

Mira Wall LED Mira Par LED IND Code 1959

Indirect lighting. Upper closing diffuser in selfextinguishing V2 transparent polycarbonate, UV stabilized.

E=100% Code

Item

Electronic 1959 Mira Par LED 4x12W IND L675

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

6298

675x230x80

Mira Par LED DEC Code 1961

Direct and indirect decorative lighting. Body with reticular slots. Opal acrylic upper diffuser. Opal polycarbonate Inlay Cover for perforated housings.

E=100% Code

Item

Electronic 1961 Mira Par LED DE 4x12W L675

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

6493

675x230x80

Mira Wall Fluo Luminaire for wall installation

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics Indirect asymmetric or high direct distribution.

• 55W compact fluorescent lamps, CCT nominal color temperature 4000 K, color rendering index CRI >80.

Mechanical characteristics Housing in white painted steel. Lower holes closing film made of opal polycarbonate. Flow recuperator in specular aluminium with superficial titanium-magnesium treatment.

On request

Electrical characteristics EEI A2 electronic wiring, 230V-50/60Hz, lamp warm start. In compliance with EN 60598-1.

• housing in RAL colour • fuse accessory (on page 472) • wiring: dimmable, emergency

Installation Wall installation.

Accessories Accessories on page 32.

Dimensions

H A

Surface luminaires and suspensions

Mira Wall Fluo Mira Par Fluo Code 1575

Housing with microperforations. Upper closing diffuser in selfextinguishing V2 transparent polycarbonate, UV stabilized.

E>76% Indirect E>65% Direct E>11% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Lamps supplied 1575 Mira Par 1x55 C HF

4300

675x230x80

1576

118

8600

675x230x80

EEI A2 electronic wiring - Lamps not included 1577 Mira Par 1x36 HF

3350

1285x230x80

1578

5200

1585x230x80

Mira Par 2x55 C HF

Mira Par 1x58 HF

1580

Mira Par 2x36 HF

6700

1285x230x80

1581

Mira Par 2x58 HF

109

10400

1585x230x80

Mira Par Fluo DE Code 1594

Body with reticular slots. Opal acrylic upper diffuser. EEI A2 multiwatt electronic wiring, 230V-50/60Hz, lamp warm start.

E>69% Indirect E>44% Direct E>25% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

Electronic MultiWatt EEI A2 - Lamps not included 1597 Mira Par DE 2x14-24 T5 HF

31-49

2400-3500

675x230x80

1594

Mira Par DE 2x28-54 T5 HF

60-114

5200-8900

1235x230x80

1598

Mira Par DE 2x35-49-80 T5 HF

76-106-170

6600-8600-12300

1535x230x80

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Mira Accessories Connecting element for variable interdistances between luminaires, composed of a pair of adapter cylinders and aluminium tube 1.5 m long, Ø35 mm, which can be sectioned to any desired length.

Code

Item

A0034

Pair of white cylinders

A0035

Aluminium tube 1.5 m white

5-pole terminal block, connection capacity from 2.5 to 6 mm², on galvanized steel bracket for cascade connection lines.

Code

Item

A0090

Bracket/5-pole terminal block

Surface luminaires and suspensions

3F Canda Quadrato LED Compact LED luminaire for high energy efficiency systems

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics Lifetime (L90/B10): 30000 h. (Tp 60°C) Lifetime (L85/B10): 50000 h. (Tp 60°C) Photobiological safety RG0, risk absent, in compliance with IEC 62471.

• Linear LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3.

Ceiling mounting or semi-recessed installation. Environments where soft diffuse light is required for optimal visual comfort. 2MG version Environments: exhibition areas, staterooms, with VDTs, transit areas, halls, shops, great halls, offices.

Mechanical characteristics Single-piece housing in pressed steel, painted white. Electrical characteristics Electronic wiring 230V-50/60Hz. In compliance with EN 60598-1.

On request • satin louvre • wiring: twin-circuit 2x12W version • wiring: dimmable, emergency (wiring unit outside the luminaire)

Accessories Accessories on page 39.

Dimensions

2 x 8W

2 x 12W

A=L

Surface luminaires and suspensions

3F Canda Quadrato LED 3F Canda Quadrato LED 2MG Code 164732

Average luminance <1000 cd/m² for radial angles >65°. 2MG parabolic louvre, high efficiency, in specular aluminium with superficial titanium-magnesium treatment, non-iridescent, with transverse blades closed at the top. Prismatic PMMA diffuser for total shielding of the louvre compartment. Film protective against dust and finger marks, adhesive, attached to louvre. L<1000 cd/m² 65° E=100% Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 164719 3F Canda LED 2x8W 2MG 300x300

1044

300x300x79

164732

29.5

2814

430x430x79

3F Canda LED 2x12W 2MG 430x430

3F Canda Quadrato LED SP Code 164736

SP transparent PMMA diffuser, prismatic exterior, anti-glare, locked to the flow recuperators. Flow recuperator in specular aluminium.

E=100% Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 164723 3F Canda LED 2x8W SP 300x300

1032

300x300x79

164736

29.5

2781

430x430x79

3F Canda LED 2x12W SP 430x430

Datasheets, product updates and specifications on our website: www.3f-filippi.com

3F Canda Fluo High visual comfort luminaire

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics Direct or direct/indirect distribution. Average luminance <200 cd/m² for radial angles >65°.

T5 fluorescent lamps, CCT nominal color temperature 4000 K, color rendering index CRI >80.

Environments: exhibition areas, staterooms, with VDTs, transit areas, halls, shops, great halls, offices. Environments where soft diffuse light is required for optimal visual comfort.

Mechanical characteristics Single-piece housing in pressed steel, painted white. Parabolic louvres with transverse blades closed at the top. Film protective against dust and finger marks, attached to louvre. Electrical characteristics EEI A2 electronic wiring, 230V-50/60Hz, lamp warm start. 1-10V EEI A1 dimmable electronic wiring, 230V-50/60Hz. EP maintained emergency wiring on one single lamp, 1hr duration with 24hrs recharge, fuse. In compliance with EN 60598-2-22.

On request • housing and accessories in RAL colour • fuse accessory (on page 472) • wiring: twin-circuit, dimmable, emergency, 1hr duration, 12hrs recharge • emergency inhibition

Accessories Accessories on page 39.

Dimensions H A

Surface luminaires and suspensions

3F Canda Fluo 3F Canda 2MG Code 166029

2MG parabolic louvre, high efficiency, in specular aluminium with superficial titanium-magnesium treatment, non-iridescent, with transverse blades closed at the top. Film protective against dust and finger marks, adhesive, attached to louvre. Direct distribution. L<200 cd/m² 65° E>71% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Pre-mounted lamps 166027 3F Canda 2x28 T5 HF 2MG

5200

1300x260x77

166029

3F Canda 2x35 T5 HF 2MG

6600

1600x260x77

Dimmable electronic EEI A1 - Pre-mounted lamps 166055 3F Canda 2x28 T5 HF D1-10V 2MG

5200

1300x260x77

166057

6600

1600x260x77

EP emergency, fuse - Pre-mounted lamps 166041 3F Canda 2x28 T5 HF EP 2MG

5200

1300x260x77

166043

6600

1600x260x77

3F Canda 2x35 T5 HF D1-10V 2MG

3F Canda 2x35 T5 HF EP 2MG

Datasheets, product updates and specifications on our website: www.3f-filippi.com

3F Canda Fluo 3F Canda DI 2MG Code 167329

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Pre-mounted lamps 167327 3F Canda DI 2x28 T5 HF 2MG

5200

1300x260x77

167329

6600

1600x260x77

3F Canda DI 2x35 T5 HF 2MG

Dimmable electronic EEI A1 - Pre-mounted lamps 167355 3F Canda DI 2x28 T5 HF D1-10V 2MG

5200

1300x260x77

167357

6600

1600x260x77

3F Canda DI 2x35 T5 HF D1-10V 2MG

EP emergency, fuse - Pre-mounted lamps 167341 3F Canda DI 2x28 T5 HF EP 2MG

5200

1300x260x77

167343

6600

1600x260x77

3F Canda DI 2x35 T5 HF EP 2MG

Surface luminaires and suspensions

3F Canda Accessories Bracket, for semi-recessed installation of 3F Canda Quadrato for false ceilings with panels 600x600, 600x1200 with exposed structure or plasterboard, in hot-galvanized steel. Code

Item

A0645

Semi-recessed bracket (3F Canda Quadrato)

Connecting element to form channels and branches, in white painted steel with upper holes for suspensions or wall brackets. It allows the passage of the power-supply line. Polycarbonate cover. It spaces the luminaires by 40 mm. Code

Item

A0601

White linear connecting element 40 mm

A0602

White linear connecting element 200 mm

A0603

White linear connecting element 500 mm

A0604

White linear connecting element 1100 mm

A0605

White joint 3F Canda/wall 600 mm

A0606

White joint 3F Canda/wall 1100 mm

Fixed suspension with polycarbonate case, white colour, internal bracket in galvanized steel, stainless steel cables Ø1,25 mm leaded at the end for coupling on the luminaire (not on connecting element). Wired version with white power-supply linear cable type H05VV-F 4x1.5 mm². Length of the suspension from the ceiling to the centre of the luminaire.

Code

Item

A0610

Fixed suspension with case 0.3 m

A0611

Fixed suspension with case 0.5 m

A0612

Fixed suspension with case 0.8 m

A0613

Fixed suspension with case 1 m

A0614

Wired fixed suspension with case 0.3 m

A0615

Wired fixed suspension with case 0.5 m

A0616

Wired fixed suspension with case 0.8 m

A0617

Wired fixed suspension with case 1 m

Adjustable suspension with polycarbonate case, white colour, internal bracket in galvanized steel. Stainless steel cables Ø 1.25 mm, 1 m long leaded at the end and adjusters for coupling on the luminaire and on connecting element. Wired version with white linear power supply cable, H05VV-F 4x1.5 mm². Code

Item

A0618

Adjustable suspension with case 1 m

A0619

Wired adjustable suspension with case 1 m

Datasheets, product updates and specifications on our website: www.3f-filippi.com

3F Canda Accessories Electrical socket with white polycarbonate ceiling rose Ø 86 mm, white cable 4x1.5 mm², H05VV-F (length 2 m).

Code

Item

A0130

Rose 86 (4-pole wired boss)

Spacers for reflected light luminaires, space 3F Canda linear luminaires of 60 mm from the ceiling. Realized in polycarbonate, white colour, with bracket in galvanized steel, white power-supply cable type H05VV-F 4x1.5 mm².

Code

Item

A0623

Pair of spacers 3F Canda 60 mm ceiling

To be fixed directly on the luminaire at 600 mm centre distance. Installation also possible on false ceilings with exposed profile. Two spacers each luminaire are always necessary, even for channel installations.

Bracket sliding on the housing, in white painted steel, for free positioning of mounting at the ceiling or suspended: suspensions are always necessary. Code

Item

A0629

White sliding bracket 3F Canda

Pair of wall-mounting elements, in white painted steel and white polycarbonate cover, spaces the luminaires of 28 mm from the wall. Mounting on the side of the housing and on the connecting element. Code

Item

A0631

Pair of white wall-mounting brackets 3F Canda

Only for linear luminaires, not compact.

5-pole cascade connection line, stiff cable H07V2-U, HT 90°C, 1.5 mm², terminal blocks with connection capacity 2x2.5 mm².

Code

Item

A0634

Casc. conn. Line 5x1.5 3F Canda 1300

A0635

Casc. conn. Line 5x1.5 3F Canda 1600

Surface luminaires and suspensions

3F Canda Accessories White connecting element for variable distances between two luminaries (A0607) or between the luminarie and the wall (use A0609), which is ALWAYS coupled to the tube (A0608) sectioned to any desired length and which allows the passage of the power line. Code

Item

A0607

Pair of white cylinders 3F Canda

A0608

White Alluminium Tube Ø.20 mm 1,5 m

A0609

White wall-mounting boss 3F Canda

5-pole terminal block, connection capacity from 2.5 to 6 mm², on galvanized steel bracket for cascade connection lines. Code

Item

A0090

Bracket/5-pole terminal block

Datasheets, product updates and specifications on our website: www.3f-filippi.com

3F Travetta LED LED luminaire for high energy efficiency systems

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics Direct symmetric distribution. Lifetime (L90/B10): 30000 h. (Tp 60°C) Lifetime (L85/B10): 50000 h. (Tp 60°C) Lifetime (L75/B10): 80000 h. (Tp 60°C) Photobiological safety RG0 unlimited, risk absent, in compliance with IEC 62471, IEC/TR 62778.

• Linear LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 2.

Environments: exhibition areas, staterooms, with VDTs, halls, shops, great halls, offices. Environments where soft diffuse light is required for optimal visual comfort.

Mechanical characteristics Housing with squared shape in white painted steel, with nonreflecting surface. Electrical characteristics Electronic wiring 230V-50/60Hz. 5-pole terminal block for cascade line connection with connection capacity 2x2.5 mm². In compliance with EN 60598-1.

On request • different powers or colour temperatures • different dimensions • housing and accessories in RAL colours • wiring: dimmable, emergency • version with integrated presence and light sensor

Accessories Accessories on page 60.

Dimensions

H A

H L

Surface luminaires and suspensions

3F Travetta LED 3F Travetta LED 2MG Code 10707

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 10704 3F Travetta LED 1x22W 2MG L1590

3001

1590x190x60

10707

5813

1590x190x60

3F Travetta LED 2x22W 2MG L1590

3F Travetta LED Opal Code 10735

OP opal methacrylate flat diffuser, anti-glare. Flow recuperator in semi-specular aluminium, high efficiency.

E=100% Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 10732 3F Travetta LED 1x22W OP L1590

2744

1590x190x60

10775 New

3F Travetta LED 1x40W OP L2200

4608

2200x190x60

10735

3F Travetta LED 2x22W OP L1590

5340

1590x190x60

10777 New

3F Travetta LED 2x40W OP L2200

8970

2200x190x60

Datasheets, product updates and specifications on our website: www.3f-filippi.com

3F Travetta LED 3F Travetta LED SP Code 10721

1x - Average luminance <3000 cd/m² for radial angles >65°. SP flat diffuser in PMMA transparent prismatic methacrylate, anti-glare. Flow recuperator in semi-specular aluminium, high efficiency.

E=100% Code

Item

Electronic 10718 3F Travetta LED 1x22W SP L1590 10771

New

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

2945

1590x190x60

3F Travetta LED 1x40W SP L2200

4947

2200x190x60

10721

3F Travetta LED 2x22W SP L1590

5743

1590x190x60

10773 New

3F Travetta LED 2x40W SP L2200

9648

2200x190x60

Surface luminaires and suspensions

New

3F Travetta LED DI LED pendant luminaire for energy-efficient systems

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics Direct-indirect distribution. Average luminance <1000 cd/m² for radial angles >65°. Lifetime (L90/B10): 30000 h. (Tp 60°C) Lifetime (L85/B10): 50000 h. (Tp 60°C) Lifetime (L75/B10): 80000 h. (Tp 60°C) Photobiological safety RG0 unlimited, risk absent, in compliance with IEC 62471, IEC/TR 62778.

• Linear LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 2.

Environments: exhibition areas, staterooms, with VDTs, halls, shops, great halls, offices. Environments where soft diffuse light is required for optimal visual comfort.

Mechanical characteristics Housing with squared shape in white painted steel, with nonreflecting surface. Upper holes closing film made of opal polycarbonate. Electrical characteristics Electronic wiring 230V-50/60Hz. In compliance with EN 60598-1. 5-pole terminal block for cascade line connection with connection capacity 2x2.5 mm².

Accessories Accessories on page 60.

Dimensions

H A

H L

Surface luminaires and suspensions

3F Travetta LED DI 3F Travetta LED DI 2MG Code 10748

2MG parabolic louvre, high efficiency, in specular aluminium with superficial titanium-magnesium treatment, non-iridescent, with transverse blades closed at the top. Prismatic PMMA diffuser for total shielding of the louvre compartment. Film protective against dust and finger marks, adhesive, attached to louvre. L<1000 cd/m² 65° E=100% Indirect E>19% Direct E>81% Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 10747 New 3F Travetta LED DI 2x15W 2MG L1590

3694

1590x190x60

10748 New

5455

1590x190x60

3F Travetta LED DI 2x22W 2MG L1590

Datasheets, product updates and specifications on our website: www.3f-filippi.com

New

3F Travetta LED HCL Wellbeing LED fixture

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics Direct symmetric distribution. Average luminance <1000 cd/m² for radial angles >65°. The color temperature can be adjusted between 2700 K and 6500 K. Lifetime (L90/B10): 30000 h. (Tp 60°C) Lifetime (L85/B10): 50000 h. (Tp 60°C) Lifetime (L75/B10): 80000 h. (Tp 60°C) Photobiological safety RG0 unlimited, risk absent, in compliance with IEC 62471, IEC/TR 62778.

• Linear LED modules, CCT nominal color temperature from 2700 K to 6500 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3.

Mechanical characteristics Housing with squared shape in white painted steel, with nonreflecting surface.

On request • different dimensions • housing and accessories in RAL colours • wiring: emergency

Light Management In this product the light intensity and color temperature can be controlled automatically or manually, with the “Controller HCL” (see “Light Management” chapter).

Accessories Accessories on page 60.

Electrical characteristics DALI electronic wiring 230V-50/60Hz. In compliance with EN 60598-1. 5-pole terminal block for cascade line connection with connection capacity 2x2.5 mm². Dimensions

H A

H L

Surface luminaires and suspensions

3F Travetta LED HCL 3F Travetta LED HCL Code 10763

Variable light intensity and color temperature. 2MG parabolic louvre, high efficiency, in specular aluminium with superficial titanium-magnesium treatment, non-iridescent, with transverse blades closed at the top. Opal methacrylate diffuser for total shielding of the louvre compartment. Film protective against dust and finger marks, adhesive, attached to louvre. L<1000 cd/m² 65° E=100% Code

Item

DALI electronic 10763 New 3F Travetta LED 2x22W DALI HCL 2MG L1590

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

5813

1590x190x60

3F Travetta Fluo Luminaire with direct light distribution

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics Direct symmetric distribution, asymmetric lighting distribution can be achieved in the singlelamp versions by offsetting the lamp.

• T5 fluorescent lamps, mounted (except for Multiwatt series), CCT nominal color temperature 4000 K, color rendering index CRI >80.

Mechanical characteristics Housing with squared shape in white or grey RAL 9006 (GR) painted steel, with non-reflecting surface.

On request

Environments: exhibition areas, staterooms, with VDTs, halls, shops, great halls, offices. Environments where soft diffuse light is required for optimal visual comfort. 2MG WIDE version Low-ceiling environments or where requirements can change.

Electrical characteristics EEI A2 electronic wiring, 230V-50/60Hz, lamp warm start. EEI A2 multiwatt electronic wiring, 230V-50/60Hz, lamp warm start. DALI MultiWatt EEI A1 electronic wiring, 230V-50/60Hz, lamp warm start. 5-pole terminal block for cascade line connection with connection capacity 2x2.5 mm².

• lamps in different powers or colour temperatures • housing and accessories in RAL colour • prismatic transparent flat diffuser • fuse accessory (on page 472) • wiring: dimmable, MultiWatt electronic, twin-circuit, emergency • emergency inhibition

Light Management The DALI products of this family can be controlled manually with the technology “3F Easy” or even automatically and manually using the “3F Smart Dimming” technology (see “Light Management” chapter).

Accessories Accessories on page 60.

Dimensions

H A

H L

Surface luminaires and suspensions

3F Travetta Fluo 3F Travetta 2MG Code 13261

Average luminance <1000 cd/m² for radial angles >65°. 2MG parabolic louvre, high efficiency, in specular aluminium with superficial titanium-magnesium treatment, non-iridescent, with transverse blades closed at the top. Film protective against dust and finger marks, adhesive, attached to louvre. L<1000 cd/m² 65° E>68% Code

Item

Absorbed power (W)

White housing - EEI A2 electronic wiring - Pre-mounted lamps 13255 3F Travetta 1x14 T5 LD HF 2MG 16

Sources flux (lm)

Dimensions LxAxH

1200

690x190x60

13258

3F Travetta 1x24 T5 LD HF 2MG

1750

690x190x60

13262

3F Travetta 2x14 T5 LD HF 2MG

2400

690x190x60

13257

3F Travetta 1x35 T5 LD HF 2MG

3300

1590x190x60

13265

3F Travetta 2x24 T5 LD HF 2MG

3500

690x190x60

13260

3F Travetta 1x49 T5 LD HF 2MG

4300

1590x190x60

13259

3F Travetta 1x54 T5 LD HF 2MG

4450

1290x190x60

13263

3F Travetta 2x28 T5 LD HF 2MG

5200

1290x190x60

13261

3F Travetta 1x80 T5 LD HF 2MG

6150

1590x190x60

13264

3F Travetta 2x35 T5 LD HF 2MG

6600

1590x190x60

Grey housing - EEI A2 electronic wiring - Pre-mounted lamps 13085 3F Travetta GR 1x14 T5 LD HF 2MG

1200

690x190x60

13088

1750

690x190x60

3F Travetta GR 1x24 T5 LD HF 2MG

13092

3F Travetta GR 2x14 T5 LD HF 2MG

2400

690x190x60

13087

3F Travetta GR 1x35 T5 LD HF 2MG

3300

1590x190x60

13095

3F Travetta GR 2x24 T5 LD HF 2MG

3500

690x190x60

13090

3F Travetta GR 1x49 T5 LD HF 2MG

4300

1590x190x60

13089

3F Travetta GR 1x54 T5 LD HF 2MG

4450

1290x190x60

13093

3F Travetta GR 2x28 T5 LD HF 2MG

5200

1290x190x60

13091

3F Travetta GR 1x80 T5 LD HF 2MG

6150

1590x190x60

13094

3F Travetta GR 2x35 T5 LD HF 2MG

6600

1590x190x60

Datasheets, product updates and specifications on our website: www.3f-filippi.com

3F Travetta Fluo 3F Travetta 2MG WIDE Code 13163

L<1000 cd/m² 65° E>74%

Code

Item

Average luminance <1000 cd/m² for radial angles >65°. Direct wide distribution to optimize lighting uniformity with wide installation distances among luminaires in environments with low ceilings. 2MG parabolic louvre, high efficiency, in specular aluminium with superficial titanium-magnesium treatment, non-iridescent, with transverse blades closed at the top. Film protective against dust and finger marks, adhesive, attached to louvre.

Absorbed power (W)

Grey housing - Electronic MultiWatt EEI A2 - Lamps not included 13162 3F Travetta GR 1x28-54 T5 HF 2MG AMPIA 31-58

Sources flux (lm)

Dimensions LxAxH

2600-4450

1290x190x60

13163

3F Travetta GR 1x35-49-80 T5 HF 2MG AMPIA

38-53-86

3300-4300-6150

1590x190x60

13165

3F Travetta GR 2x28-54 T5 HF 2MG AMPIA

60-114

5200-8900

1290x190x60

13166

3F Travetta GR 2x35-49 T5 HF 2MG AMPIA

76-106

6600-8600

1590x190x60

3F Travetta DALI 2MG WIDE Code 14878

L<1000 cd/m² 65° E>74%

Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

White housing - DALI EEI A1 electronic Multiwatt - Lamps not included 14877 3F Travetta 1x28-54 T5 HF DALI 2MG AMPIA 31-58

2600-4450

1290x190x60

14878

3300-4300-6150

1590x190x60

3F Travetta 1x35-49-80 T5 HF DALI 2MG AM

38-53-86

14879

3F Travetta 2x28-54 T5 HF DALI 2MG AMPIA

60-114

5200-8900

1290x190x60

14880

3F Travetta 2x35-49-80 T5 HF DALI 2MG AM

76-106-170

6600-8600-12300

1590x190x60

Surface luminaires and suspensions

3F Travetta Fluo 3F Travetta 2S Code 13604

Average luminance <1000 cd/m² for radial angles >65°. 2S parabolic louvre in semi-specular aluminium, non-reflecting, with transverse blades closed at the top. Film protective against dust and finger marks, adhesive, attached to louvre.

L<1000 cd/m² 65° E>62% Code

Item

Absorbed power (W)

White housing - EEI A2 electronic wiring - Pre-mounted lamps 13595 3F Travetta 1x14 T5 LD HF 2S 16

Sources flux (lm)

Dimensions LxAxH

1200

690x190x60

13598

3F Travetta 1x24 T5 LD HF 2S

1750

690x190x60

13602

3F Travetta 2x14 T5 LD HF 2S

2400

690x190x60

13597

3F Travetta 1x35 T5 LD HF 2S

3300

1590x190x60

13605

3F Travetta 2x24 T5 LD HF 2S

3500

690x190x60

13600

3F Travetta 1x49 T5 LD HF 2S

4300

1590x190x60

13599

3F Travetta 1x54 T5 LD HF 2S

4450

1290x190x60

13603

3F Travetta 2x28 T5 LD HF 2S

5200

1290x190x60

13601

3F Travetta 1x80 T5 LD HF 2S

6150

1590x190x60

13604

3F Travetta 2x35 T5 LD HF 2S

6600

1590x190x60

Grey housing - EEI A2 electronic wiring - Pre-mounted lamps 13425 3F Travetta GR 1x14 T5 LD HF 2S

1200

690x190x60

13428

1750

690x190x60

3F Travetta GR 1x24 T5 LD HF 2S

13432

3F Travetta GR 2x14 T5 LD HF 2S

2400

690x190x60

13427

3F Travetta GR 1x35 T5 LD HF 2S

3300

1590x190x60

13435

3F Travetta GR 2x24 T5 LD HF 2S

3500

690x190x60

13430

3F Travetta GR 1x49 T5 LD HF 2S

4300

1590x190x60

13429

3F Travetta GR 1x54 T5 LD HF 2S

4450

1290x190x60

13433

3F Travetta GR 2x28 T5 LD HF 2S

5200

1290x190x60

13431

3F Travetta GR 1x80 T5 LD HF 2S

6150

1590x190x60

13434

3F Travetta GR 2x35 T5 LD HF 2S

6600

1590x190x60

Datasheets, product updates and specifications on our website: www.3f-filippi.com

3F Travetta Fluo 3F Travetta Opal Code 19090

OP opal methacrylate flat diffuser, anti-glare. Flow recuperator in semi-specular aluminium, high efficiency.

E>57% Code

Item

Absorbed power (W)

White housing - EEI A2 electronic wiring - Pre-mounted lamps 19003 3F Travetta 1x35 T5 LD HF OP 38

Sources flux (lm)

Dimensions LxAxH

3300

1290x190x60

19006

3F Travetta 1x49 T5 LD HF OP

4300

1290x190x60

19005

3F Travetta 1x54 T5 LD HF OP

4450

1590x190x60

19009

3F Travetta 2x28 T5 LD HF OP

5200

1590x190x60

19010

3F Travetta 2x35 T5 LD HF OP

6600

1590x190x60

Grey housing - EEI A2 electronic wiring - Pre-mounted lamps 19088 3F Travetta GR 1x35 T5 LD HF OP

3300

1290x190x60

19091

4300

1290x190x60

3F Travetta GR 1x49 T5 LD HF OP

19090

3F Travetta GR 1x54 T5 LD HF OP

4450

1590x190x60

19094

3F Travetta GR 2x28 T5 LD HF OP

5200

1590x190x60

19095

3F Travetta GR 2x35 T5 LD HF OP

6600

1590x190x60

Surface luminaires and suspensions

3F Travetta DI Fluo Suspension luminaire with direct and indirect light distribution

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics Direct-indirect symmetric distribution, asymmetric lighting distribution can be achieved in the singlelamp versions by offsetting the lamp.

• T5 fluorescent lamps, mounted (except for Multiwatt series), CCT nominal color temperature 4000 K, color rendering index CRI >80.

Mechanical characteristics Housing with squared shape in white or grey RAL 9006 (GR) painted steel, with non-reflecting surface. Electrical characteristics EEI A2 electronic wiring, 230V-50/60Hz, lamp warm start. EEI A2 multiwatt electronic wiring, 230V-50/60Hz, lamp warm start. DALI MultiWatt EEI A1 electronic wiring, 230V-50/60Hz, lamp warm start. 5-pole terminal block for cascade line connection with connection capacity 2x2.5 mm².

On request • different powers or colour temperatures • housing and accessories in RAL colours • lower flat diffuser in transparent PMMA, prismatic • fuse accessory (on page 472) • wiring: dimmable, MultiWatt electronic, twin-circuit, emergency • emergency inhibition

Accessories Accessories on page 60.

Dimensions

H A

H L

Surface luminaires and suspensions

3F Travetta DI Fluo 3F Travetta DI 2MG Code 13174

Average luminance <1000 cd/m² for radial angles >65°. 2MG parabolic louvre, high efficiency, in specular aluminium with superficial titanium-magnesium treatment, non-iridescent, with transverse blades closed at the top. Film protective against dust and finger marks, adhesive, attached to louvre. L<1000 cd/m² 65° E>87% Code

Item

Absorbed power (W)

White housing - EEI A2 electronic wiring - Pre-mounted lamps 13172 3F Travetta DI 1x35 T5 LD HF 2MG 38

Sources flux (lm)

Dimensions LxAxH

3300

1590x190x60

13175

3F Travetta DI 1x49 T5 LD HF 2MG

4300

1590x190x60

13174

3F Travetta DI 1x54 T5 LD HF 2MG

4450

1290x190x60

13178

3F Travetta DI 2x28 T5 LD HF 2MG

5200

1290x190x60

13179

3F Travetta DI 2x35 T5 LD HF 2MG

6600

1590x190x60

Grey housing - EEI A2 electronic wiring - Pre-mounted lamps 13002 3F Travetta GR DI 1x35 T5 LD HF 2MG

3300

1590x190x60

13005

4300

1590x190x60

3F Travetta GR DI 1x49 T5 LD HF 2MG

13004

3F Travetta GR DI 1x54 T5 LD HF 2MG

4450

1290x190x60

13008

3F Travetta GR DI 2x28 T5 LD HF 2MG

5200

1290x190x60

13009

3F Travetta GR DI 2x35 T5 LD HF 2MG

6600

1590x190x60

3F Travetta DI 2MG WIDE Code 13078

L<1000 cd/m² 65° E>81%

Code

Item

Average luminance <1000 cd/m² for radial angles >65°. Wide distribution to optimize lighting uniformity with wide installation distances among luminaires in environments with low ceilings. 2MG parabolic louvre, high efficiency, in specular aluminium with superficial titanium-magnesium treatment, non-iridescent, with transverse blades closed at the top. Film protective against dust and finger marks, adhesive, attached to louvre.

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

Grey housing - Electronic MultiWatt EEI A2 - Lamps not included 13077 3F Travetta GR DI 1x28-54 T5 HF 2MG AMPIA 31-58

2600-4450

1290x190x60

13078

3300-4300-6150

1590x190x60

3F Travetta GR DI 1x35-49-80T5 HF 2MG AM

38-53-86

13080

3F Travetta GR DI 2x28-54 T5 HF 2MG AMPIA

60-114

5200-8900

1290x190x60

13081

3F Travetta GR DI 2x35-49 T5 HF 2MG AMPIA

76-106

6600-8600

1590x190x60

Datasheets, product updates and specifications on our website: www.3f-filippi.com

3F Travetta DI Fluo 3F Travetta DI DALI 2MG WIDE Code 14923

L<1000 cd/m² 65° E>81%

Code

Item

Absorbed power (W)

White housing - DALI EEI A1 electronic Multiwatt - Lamps not included 14922 3F Travetta DI 1x28-54 T5 HF DALI 2MG AM 31-58

Sources flux (lm)

Dimensions LxAxH

2600-4450

1290x190x60

14923

3F Trav. DI 1x35-49-80 T5 HF DALI 2MG AM

38-53-86

3300-4300-6150

1590x190x60

14924

3F Travetta DI 2x28-54 T5 HF DALI 2MG AM

60-114

5200-8900

1290x190x60

14925

3F Trav.DI 2x35-49-80 T5 HF DALI 2MG AM

76-106-170

6600-8600-12300

1590x190x60

3F Travetta DI 2S Code 13514

L<1000 cd/m² 65° E>78% Code

Item

Sources flux (lm)

Dimensions LxAxH

White housing - EEI A2 electronic wiring - Pre-mounted lamps 13512 3F Travetta DI 1x35 T5 LD HF 2S 38

3300

1590x190x60

13515

4300

1590x190x60

3F Travetta DI 1x49 T5 LD HF 2S

Absorbed power (W)

13514

3F Travetta DI 1x54 T5 LD HF 2S

4450

1290x190x60

13518

3F Travetta DI 2x28 T5 LD HF 2S

5200

1290x190x60

13519

3F Travetta DI 2x35 T5 LD HF 2S

6600

1590x190x60

3300

1590x190x60

Grey housing - EEI A2 electronic wiring - Pre-mounted lamps 13342 3F Travetta GR DI 1x35 T5 LD HF 2S 13345

3F Travetta GR DI 1x49 T5 LD HF 2S

4300

1590x190x60

13344

3F Travetta GR DI 1x54 T5 LD HF 2S

4450

1290x190x60

13348

3F Travetta GR DI 2x28 T5 LD HF 2S

5200

1290x190x60

13349

3F Travetta GR DI 2x35 T5 LD HF 2S

6600

1590x190x60

Surface luminaires and suspensions

3F Travetta DI Fluo 3F Travetta DI Opal Code 19175

OP lower flat diffuser in opal PMMA methacrylate, upper in opal polycarbonate. Flow recuperator in semi-specular aluminium, high efficiency.

E>69% Code

Item

Absorbed power (W)

White housing - EEI A2 electronic wiring - Pre-mounted lamps 19173 3F Travetta DI 1x35 T5 LD HF OP 38

Sources flux (lm)

Dimensions LxAxH

3300

1590x190x60

19176

3F Travetta DI 1x49 T5 LD HF OP

4300

1590x190x60

19175

3F Travetta DI 1x54 T5 LD HF OP

4450

1290x190x60

19179

3F Travetta DI 2x28 T5 LD HF OP

5200

1290x190x60

19180

3F Travetta DI 2x35 T5 LD HF OP

6600

1590x190x60

Grey housing - EEI A2 electronic wiring - Pre-mounted lamps 19258 3F Travetta GR DI 1x35 T5 LD HF OP

3300

1590x190x60

19261

4300

1590x190x60

3F Travetta GR DI 1x49 T5 LD HF OP

19260

3F Travetta GR DI 1x54 T5 LD HF OP

4450

1290x190x60

19264

3F Travetta GR DI 2x28 T5 LD HF OP

5200

1290x190x60

19265

3F Travetta GR DI 2x35 T5 LD HF OP

6600

1590x190x60

Datasheets, product updates and specifications on our website: www.3f-filippi.com

3F Travetta Accessories Connecting bracket to form linear channels or branches of single luminaires, in galvanized steel with upper holes for adjustable suspensions. Code

Item

A0875

Connecting bracket for linear channels or branches

Linear connecting element and for branch, between luminaires or between luminaires and wall, to form channels, in steel with accessorizable cover, white or grey RAL 9006 colour. It allows the passage of the power-supply line. Concerning the use of connecting elements in false ceilings 600x600, see installation.

Code

Item

A0880

Connecting element 190x190 3F Travetta GR

A0882

Connecting element 190x210 3F Travetta GR

A0883

Connecting element 190x510 3F Travetta GR

A0884

Connecting element 190x810 3F Travetta GR

A0885

Connecting element 190x1110 3F Travetta GR

A0892

White connecting element 190x190 3F Travetta GR

A0894

White connecting element 190x210 3F Travetta GR

A0895

White connecting element 190x510 3F Travetta GR

A0896

White connecting element 190x810 3F Travetta GR

A0897

White connecting element 190x1110 3F Travetta GR

A0937

Connecting element lum/wall 810 3F Travetta GR

A0938

Connecting element lum/wall 1110 3F Travetta GR

A0941

White connecting element lum/wall 810 3F Travetta

A0942

White connecting element lum/wall 1110 3F Travetta

On request: Elements of desired length. Connecting elements for false ceiling 625x625.

Surface luminaires and suspensions

3F Travetta Accessories Branch in correspondence with linear connecting elements, in steel with accessorizable cover, white or grey RAL 9006 colour.

Code

Item

A0945

Branches elem.190x310 3F Travetta GR

A0946

Branches elem.190x460 3F Travetta GR

A0951

White branches elem. 190x310 3F Travetta

A0952

White branches elem. 190x460 3F Travetta

A0877

Bracket for T-branch for 3F Travetta

A0878

Bracket for X-branch for 3F Travetta

It allows the passage of the power-supply line. The linear connecting element 190x190 can be used also for T-branches (it needs one bracket code A0875) and X-branches (it needs two brackets code A0875). The connecting elements are used for T-branches (they need one bracket code A0877) and X-branches (they need one bracket code A0878). To obtain an excellent T- or X-branch in correspondence with the connecting elements for false ceiling with exposed profiles 600x600, it is advisable to couple the linear connecting element 1110 mm with branch 460 mm and the linear connecting element 810 mm with branch 310 mm.

Connecting element between luminaires or between luminaire and wall, white or grey RAL 9006 colour, composed of aluminium tube 1.5 m long Ø20 mm, which can be sectioned to any desired length, it allows the passage of the power-supply line. Code

Item

A0869

Grey connecting element with boss for luminaires

A0870

White connecting element with boss for luminaires

A0871

Grey connecting element to wall with boss for luminaires

A0872

White connecting element to wall with boss for luminaires

Linear connecting element end cap to be used when there are connecting elements at the beginning or end of a channel. Code

Item

A01368

Travetta B joint closing cap

A01370

Travetta GR joint closing cap

Adjustable suspension with polycarbonate case in white colour, internal bracket in galvanized steel. Wired version with transparent power cable 5x1.5 mm². Stainless steel cables, length 1 m, leaded at one end with adjusters for coupling on the luminaire.

Code

Item

A01318

White rectangular case suspension-adj. 1 m

A01325

Wired suspension 5P white rectangular case-adj.1 m

On request: for suspensions longer than 1 m, it is necessary not only to order codes 01318-01325 but also stainless steel cables in spool of 100 m and pack of n° 100 clamps.

Datasheets, product updates and specifications on our website: www.3f-filippi.com

3F Travetta Accessories Fixed suspension with white polycarbonate case, internal bracket in galvanized steel. Wired version with transparent power-supply cable 5x1.5 mm². Stainless steel cables leaded at the end for coupling on the luminaire.

Code

Item

A01314

White rectangular case suspension- fixed 0,3m

A01315

White rectangular case suspension- fixed 0,5m

A01317

White rectangular case suspension- fixed 1m

A01321

Wired susp. 5P white rectangular case-fixed 0,3m

A01322

Wired susp. 5P white rectangular case-fixed 0,5m

A01324

Wired suspension 5P white rectangular case-fixed 1m

Coil of stainless steel cable “Ø 1.25 mm”, length 100 m. Code

Item

A0620

Spool with stainless steel cable diam. 1,25mm 100 m

Clamps in nickel-plated brass suitable for fixing of steel wire (diameter 1.25 mm - 1.5 mm - 2 mm), complete with locking screws.

Code

Item

A0622

Clamp 1 hole - 100 pcs

Surface luminaires and suspensions

3F info point Filigare Range Filigare range luminaires are available in two versions: Filigare - single luminaires 3F Fil - luminaires to create continuous lighting channels Both offer various possibilities of lighting distribution, direct and direct/indirect, wide and medium, symmetrical and asymmetrical, to optimise lighting of the work area.

Filigare - single luminaires Available sources: - T5 or T8 Fluorescent - LED

Standard features: - End caps - Pre-mounted T5 lamps

Accessories: - Kit to create continuous lines

3F Fil - luminaires to create continuous lighting channels Available sources: - T5 fluorescent - LED

Standard features: - Through power supply lines - Connection kit already fitted on one cap

Accessories: - End caps

New

Filigare 180 LED LED luminaire for high energy efficiency systems and total shielding of the louvre compartment

Construction characteristics

Source characteristics

Applications

• Linear LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 2.

2US version Environments: with VDTs, schools, offices. Environments: commercial, exhibition areas, transit areas, lobbies or waiting rooms, shops, schools. High energy efficiency systems.

On request

Installation

• different powers or colour temperatures • asymmetric luminaires • housing and accessories in RAL colours • wiring: dimmable, emergency

In the case of 2US unit ceiling installation, concealed sliding brackets (accessory) are always necessary.

Accessories Accessories on page 82.

Dimensions

H A

H L

Surface luminaires and suspensions

Filigare 180 LED Filigare 180 LED RSP Code 12403

Flow recuperator in specular aluminium, high efficiency, with superficial titanium-magnesium treatment, non-iridescent. SP diffuser in self-extinguishing V2 transparent polycarbonate, photo-engraved inside, UV stabilised, injection moulded with smooth outside.

E=100% Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 12403 Fil 180 LED 2x24W RSP AMPIO L1280

6742

1280x180x85

12404

8421

1590x180x85

Fil 180 LED 2x30W RSP AMPIO L1590

Filigare 180 LED 2US Code 12603

Average luminance <1000 cd/m² for radial angles >65°. 2US parabolic louvre in semi-glossy aluminium, anti-glare, with transverse blades closed at the top. Prismatic PMMA diffuser for total shielding of the louvre compartment. Film protective against dust and finger marks, adhesive, attached to louvre. L<1000 cd/m² 65° E=100% Code

Item

Electronic 12601 Fil 180 LED 1x24W 2US L1280

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

2745

1280x180x85

12603

Fil 180 LED 1x30W 2US L1590

3435

1590x180x85

12605

Fil 180 LED 2x24W 2US L1280

4778

1280x180x85

12607

Fil 180 LED 2x30W 2US L1590

5980

1590x180x85

12614

Fil 180 LED 1+1x30W 2US L3140

6870

3140x180x85

12618

Fil 180 LED 2+2x30W 2US L3140

136

11960

3140x180x85

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Filigare 180 Fluo Luminaire with parabolic louvre or flux recuperator

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics Direct symmetric distribution.

• T5 fluorescent lamps, mounted, CCT nominal color temperature 4000 K, color rendering index CRI >80.

2M, 2MG, 2US versions Environments: with VDTs, schools, offices. 3AO version Environments: architectural, commercial, exhibition areas, transit areas, lobbies or waiting rooms, shops, schools. RFMG version Environments: commercial, exhibition areas, transit areas, halls, shops, great halls, display windows.

Mechanical characteristics Housing in hot-galvanised steel, painted in white polyester. Metal end caps with cover element in white polycarbonate, removable to form channels. Parabolic louvres with transverse blades closed at the top. Parabolic flux recuperator. Film protective against dust and finger marks, adhesive, attached to louvre. Electrical characteristics EEI A2 electronic wiring, 230V-50/60Hz, lamp warm start. 2+2 version with twin-circuit wiring, lamps side by side. EP maintained emergency wiring on one single lamp, 1hr duration with 24hrs recharge, fuse. In compliance with EN 60598-2-22.

On request • parabolic louvres 3DEC • asymmetric luminaires in 2M and 2US versions • 1+1x36-58 luminaires with electronic wiring • Multiwatt electronic ballasts for T5 lamps • multilenticular transparent PMMA diffuser • matt metallic silver end caps • fuse accessory (on page 472) • wiring: dimmable, emergency with different characteristics • emergency inhibition

Accessories Accessories on page 82.

Dimensions

H A

H L

Surface luminaires and suspensions

Filigare 180 Fluo Filigare 180 T5 2M Code 11012

Average luminance <200 cd/m² for radial angles >65°. 2M parabolic louvre in specular aluminium, with transverse blades closed at the top. Film protective against dust and finger marks, adhesive, attached to louvre.

L<200 cd/m² 65° E>61% Code

Item

EEI A2 electronic wiring - Pre-mounted lamps 11006 Fil 180 1x28 T5 HF 2M

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

2600

1210x180x85

11007

Fil 180 1x35 T5 HF 2M

3300

1510x180x85

11008

Fil 180 1+1x28 T5 HF 2M

5200

2380x180x85

11011

Fil 180 2x28 T5 HF 2M

5200

1210x180x85

11009

Fil 180 1+1x35 T5 HF 2M

6600

2980x180x85

11012

Fil 180 2x35 T5 HF 2M

6600

1510x180x85

11013

Fil 180 2+2x28 T5 HF 2M

120

10400

2380x180x85

11014

Fil 180 2+2x35 T5 HF 2M

152

13200

2980x180x85

EP emergency, fuse - Pre-mounted lamps 11016 Fil 180 1x28 T5 HF EP 2M

2600

1210x180x85

11017

3300

1510x180x85

Fil 180 1x35 T5 HF EP 2M

11021

Fil 180 2x28 T5 HF EP 2M

5200

1210x180x85

11022

Fil 180 2x35 T5 HF EP 2M

6600

1510x180x85

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Filigare 180 Fluo Filigare 180 T8 2M Code 11047

L<200 cd/m² 65° E>62% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Lamps not included 11046 Fil 180 1x36 HF 2M

3350

1280x180x85

11047

Fil 180 1x58 HF 2M

5200

1590x180x85

EP emergency, fuse - Lamps not included 11051 Fil 180 1x36 HF EP 2M

3350

1280x180x85

11052

5200

1590x180x85

Fil 180 1x58 HF EP 2M

Filigare 180 T5 2MG Code 11072

Average luminance <200 cd/m² for radial angles >65°. 2MG parabolic louvre, high efficiency, in specular aluminium with superficial titanium-magnesium treatment, non-iridescent, with transverse blades closed at the top. Film protective against dust and finger marks, adhesive, attached to louvre. L<200 cd/m² 65° E>67% Code

Item

EEI A2 electronic wiring - Pre-mounted lamps 11066 Fil 180 1x28 T5 HF 2MG

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

2600

1210x180x85

11067

Fil 180 1x35 T5 HF 2MG

3300

1510x180x85

11068

Fil 180 1+1x28 T5 HF 2MG

5200

2380x180x85

11071

Fil 180 2x28 T5 HF 2MG

5200

1210x180x85

11069

Fil 180 1+1x35 T5 HF 2MG

6600

2980x180x85

11072

Fil 180 2x35 T5 HF 2MG

6600

1510x180x85

11073

Fil 180 2+2x28 T5 HF 2MG

120

10400

2380x180x85

11074

Fil 180 2+2x35 T5 HF 2MG

152

13200

2980x180x85

Surface luminaires and suspensions

Filigare 180 Fluo Filigare 180 T8 2MG Code 11107

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Lamps not included 11106 Fil 180 1x36 HF 2MG

3350

1280x180x85

11107

5200

1590x180x85

Fil 180 1x58 HF 2MG

Filigare 180 T5 2US Code 11132

Average luminance <200 cd/m² for radial angles >65°. 2US parabolic louvre in semi-glossy aluminium, anti-glare, with transverse blades closed at the top. Film protective against dust and finger marks, adhesive, attached to louvre.

L<200 cd/m² 65° E>60% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Pre-mounted lamps 11126 Fil 180 1x28 T5 HF 2US

2600

1210x180x85

11127

3300

1510x180x85

Fil 180 1x35 T5 HF 2US

11128

Fil 180 1+1x28 T5 HF 2US

5200

2380x180x85

11131

Fil 180 2x28 T5 HF 2US

5200

1210x180x85

11129

Fil 180 1+1x35 T5 HF 2US

6600

2980x180x85

11132

Fil 180 2x35 T5 HF 2US

6600

1510x180x85

11133

Fil 180 2+2x28 T5 HF 2US

120

10400

2380x180x85

11134

Fil 180 2+2x35 T5 HF 2US

152

13200

2980x180x85

EP emergency, fuse - Pre-mounted lamps 11136 Fil 180 1x28 T5 HF EP 2US

2600

1210x180x85

11137

3300

1510x180x85

Fil 180 1x35 T5 HF EP 2US

11141

Fil 180 2x28 T5 HF EP 2US

5200

1210x180x85

11142

Fil 180 2x35 T5 HF EP 2US

6600

1510x180x85

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Filigare 180 Fluo Filigare 180 T8 2US Code 11167

L<200 cd/m² 65° E>61% Code

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Lamps not included 11166 Fil 180 1x36 HF 2US

3350

1280x180x85

11167

Fil 180 1x58 HF 2US

5200

1590x180x85

EP emergency, fuse - Lamps not included 11171 Fil 180 1x36 HF EP 2US

3350

1210x180x85

11172

5200

1510x180x85

Item

Fil 180 1x58 HF EP 2US

Surface luminaires and suspensions

Filigare 180 Fluo Filigare 180 T5 3AO Code 11312

1x - Average luminance <3000 cd/m² for radial angles >65°. 3AO louvre with square cell section, in matt silver aluminium, anti-glare. Film protective against dust and finger marks, adhesive, attached to louvre.

E>56% Code

Item

EEI A2 electronic wiring - Pre-mounted lamps 11306 Fil 180 1x28 T5 HF 3AO

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

2600

1210x180x85

11307

Fil 180 1x35 T5 HF 3AO

3300

1510x180x85

11308

Fil 180 1+1x28 T5 HF 3AO

5200

2380x180x85

11311

Fil 180 2x28 T5 HF 3AO

5200

1210x180x85

11309

Fil 180 1+1x35 T5 HF 3AO

6600

2980x180x85

11312

Fil 180 2x35 T5 HF 3AO

6600

1510x180x85

11313

Fil 180 2+2x28 T5 HF 3AO

120

10400

2380x180x85

11314

Fil 180 2+2x35 T5 HF 3AO

152

13200

2980x180x85

2600

1210x180x85

EP emergency, fuse - Pre-mounted lamps 11316 Fil 180 1x28 T5 HF EP 3AO 11317

Fil 180 1x35 T5 HF EP 3AO

3300

1510x180x85

11321

Fil 180 2x28 T5 HF EP 3AO

5200

1210x180x85

11322

Fil 180 2x35 T5 HF EP 3AO

6600

1510x180x85

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Filigare 180 Fluo Filigare 180 T8 3AO Code 11347

3AO louvre with square cell section, in matt silver aluminium, anti-glare. Film protective against dust and finger marks, adhesive, attached to louvre.

E>58% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Lamps not included 11346 Fil 180 1x36 HF 3AO

3350

1280x180x85

11347

Fil 180 1x58 HF 3AO

5200

1590x180x85

EP emergency, fuse - Lamps not included 11351 Fil 180 1x36 HF EP 3AO

3350

1280x180x85

11352

5200

1590x180x85

Fil 180 1x58 HF EP 3AO

Filigare 180 T5 RFMG Code 4301

RFMG flux recuperator in specular aluminium, high efficiency, with titanium-magnesium surface treatment, non-iridescent. Cathode-covers in white polycarbonate for IP40 and to prevent lamp from falling.

E>91% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Pre-mounted lamps 4301 Fil 180 1x49 T5 HF RFMG

4300

1510x180x80

4300

4450

1210x180x80

Fil 180 1x54 T5 HF RFMG

4302

Fil 180 1x80 T5 HF RFMG

6150

1510x180x80

4304

Fil 180 1+1x49 T5 HF RFMG

106

8600

2980x180x80

4303

Fil 180 1+1x54 T5 HF RFMG

114

8900

2380x180x80

4305

Fil 180 1+1x80 T5 HF RFMG

170

12300

2980x180x80

Surface luminaires and suspensions

Filigare 180 Fluo Filigare 180 T8 RFMG Code 4106

Variable focus through plate regulator (supplied). RFMG flux recuperator in specular aluminium, high efficiency, with titanium-magnesium surface treatment, non-iridescent. Cathode-covers in white polycarbonate for IP40 and to prevent lamp from falling.

E>91% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Lamps not included 4105 Fil 180 1x36 HF RFMG

3350

1280x180x80

4106

5200

1590x180x80

Fil 180 1x58 HF RFMG

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Filigare 220 Fluo Luminaire for ceiling installation and/or suspension

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics Direct symmetric lighting distribution.

• T5 fluorescent lamps, mounted, CCT nominal color temperature 4000 K, color rendering index CRI >80.

3AO, SP versions Environments: architectural, commercial, exhibition areas, transit areas, lobbies or waiting rooms, shops, schools. 2M, 2US versions Environments: with VDTs, schools, offices. RFMG version Environments: commercial, exhibition areas, transit areas, halls, shops, great halls, display windows.

Mechanical characteristics Housing in hot-galvanised steel, painted in white polyester. Metal end caps with cover element in white polycarbonate, removable to form channels. Electrical characteristics EEI A2 electronic wiring, 230V-50/60Hz, lamp warm start. EP maintained emergency wiring on one single lamp, 1hr duration with 24hrs recharge, fuse. In compliance with EN 60598-2-22.

On request • parabolic louvres 3DEC • 2+2x36-58 luminaires with electronic wiring • Multiwatt electronic ballasts for T5 lamps • fuse accessory (on page 472) • wiring: dimmable, emergency with different characteristics • emergency inhibition

Accessories Accessories on page 82.

Dimensions

H A H L

Surface luminaires and suspensions

Filigare 220 Fluo Filigare 220 T5 2M Code 11727

Average luminance <1000 cd/m² for radial angles >65°. 2M parabolic louvre in specular aluminium, with transverse blades closed at the top. Film protective against dust and finger marks, adhesive, attached to louvre.

L<1000 cd/m² 65° E>65% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Pre-mounted lamps 11726 Fil 220 2x28 T5 HF 2M

5200

1210x220x85

11727

Fil 220 2x35 T5 HF 2M

6600

1510x220x85

EP emergency, fuse - Pre-mounted lamps 11731 Fil 220 2x28 T5 HF EP 2M

5200

1210x220x85

11732

6600

1510x220x85

Fil 220 2x35 T5 HF EP 2M

Filigare 220 T8 2M Code 11757

L<1000 cd/m² 65° E>63% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Lamps not included 11756 Fil 220 2x36 HF 2M

6700

1280x220x85

11757

Fil 220 2x58 HF 2M

109

10400

1590x220x85

EP emergency, fuse - Lamps not included 11761 Fil 220 2x36 HF EP 2M

6700

1280x220x85

11762

109

10400

1590x220x85

Fil 220 2x58 HF EP 2M

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Filigare 220 Fluo Filigare 220 T5 2US Code 11827

Average luminance <1000 cd/m² for radial angles >65°. 2US parabolic louvre in semi-glossy aluminium, anti-glare, with transverse blades closed at the top. Film protective against dust and finger marks, adhesive, attached to louvre.

L<1000 cd/m² 65° E>63% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Pre-mounted lamps 11826 Fil 220 2x28 T5 HF 2US

5200

1210x220x85

11827

6600

1510x220x85

EP emergency, fuse - Pre-mounted lamps 11831 Fil 220 2x28 T5 HF EP 2US

5200

1210x220x85

11832

6600

1510x220x85

Fil 220 2x35 T5 HF 2US

Fil 220 2x35 T5 HF EP 2US

Filigare 220 T8 2US Code 11857

L<1000 cd/m² 65° E>61% Code

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Lamps not included 11856 Fil 220 2x36 HF 2US

6700

1280x220x85

11857

Fil 220 2x58 HF 2US

109

10400

1590x220x85

EP emergency, fuse - Lamps not included 11861 Fil 220 2x36 HF EP 2US

6700

1280x220x85

11862

109

10400

1590x220x85

Item

Fil 220 2x58 HF EP 2US

Surface luminaires and suspensions

Filigare 220 Fluo Filigare 220 T5 3AO Code 11977

3AO louvre with square cell section, in matt silver aluminium, anti-glare. Film protective against dust and finger marks, adhesive, attached to louvre.

E>62% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Pre-mounted lamps 11976 Fil 220 2x28 T5 HF 3AO

5200

1210x220x85

11977

6600

1510x220x85

EP emergency, fuse - Pre-mounted lamps 11981 Fil 220 2x28 T5 HF EP 3AO

5200

1210x220x85

11982

6600

1510x220x85

Fil 220 2x35 T5 HF 3AO

Fil 220 2x35 T5 HF EP 3AO

Filigare 220 T8 3AO Code 12007

3AO louvre with square cell section, in matt silver aluminium, anti-glare. Film protective against dust and finger marks, adhesive, attached to louvre.

E>60% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Lamps not included 12006 Fil 220 2x36 HF 3AO

6700

1280x220x85

12007

109

10400

1590x220x85

Fil 220 2x58 HF 3AO

EP emergency, fuse - Lamps not included 12011 Fil 220 2x36 HF EP 3AO

6700

1280x220x85

12012

109

10400

1590x220x85

Fil 220 2x58 HF EP 3AO

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Filigare 220 Fluo Filigare 220 T8 SP Code 4351

SP transparent methacrylate diffuser, prismatic outside, antiglare.

E>52% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Lamps not included 4350 Fil 220 2x36 HF SP

6700

1280x220x80

4351

Fil 220 2x58 HF SP

109

10400

1590x220x80

EP emergency, fuse - Lamps not included 4354 Fil 220 2x36 HF EP SP

6700

1280x220x80

4355

109

10400

1590x220x80

Fil 220 2x58 HF EP SP

Filigare 220 T5 RFMG Code 4319

E>92% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Pre-mounted lamps 4319 Fil 220 2x49 T5 HF RFMG

106

8600

1510x220x80

4318

Fil 220 2x54 T5 HF RFMG

114

8900

1210x220x80

4320

Fil 220 2x80 T5 HF RFMG

170

12300

1510x220x80

Surface luminaires and suspensions

Filigare 220 Fluo Filigare 220 T8 RFMG Code 4176

Mariable focus, through plate regulator (accessory). RFMG flux recuperator in specular aluminium, high efficiency, with titanium-magnesium surface treatment, non-iridescent. Cathode-covers in white polycarbonate for IP40 and to prevent lamp from falling.

E>83% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Lamps not included 4175 Fil 220 2x36 HF RFMG

6700

1280x220x80

4176

109

10400

1590x220x80

Fil 220 2x58 HF RFMG

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Filigare Accessories Structure, Filigare 180-220 in hot-galvanized steel painted in white polyester. Code

Item

A0006

Fil 180 CP620 Structure

A0008

Fil 180 CP1240 Structure

A0009

Fil 180 CP1550 Structure

A0011

Fil 220 CP620 Structure

A0013

Fil 220 CP1240 Structure

A0014

Fil 220 CP1550 Structure

Kit for continuous channel composed of blend stop and two screws with nuts. Code

Item

A0030

Fil 180 CC (continuous channel kit)

A0031

Fil 220 CC (continuous channel kit)

Bracket to strengthen structures connection in white painted steel for continuous channel of considerable length, complete with kit for continuous channel, one bracket every two connections is recommended. Code

Item

A0066

Strength. Brack.+Connect. Kit - Fil 180

A0067

Strength. Brack.+Connect. Kit - Fil 220

Connecting element for Filigare 180 for variable interdistances between luminaires, composed of a pair of adapter cylinders and aluminium tube 1.5 m long, Ø35 mm, which can be sectioned to any desired length.

Code

Item

A0034

Pair of white cylinders

A0035

Aluminium tube 1.5 m white

The branch end cap is always necessary.

Branch box in white painted steel for L, T and cross-shaped branches. Possibility of suspension at the centre of the box, see suspension (cod. A0045 - A0046 - A0047 - A0762 A0766 - A0770). A hermetic junction box can be housed internally.

Code

Item

A0036

Fil 180 BL (box for branch)

A0037

Fil 220 BL (box for branch)

Surface luminaires and suspensions

Filigare Accessories Elements for branch and for wall-mounting, Filigare 180 in white polycarbonate, interchangeable with standard end caps. Code

Item

A0033

Fil 180 DT (element for branch)

Articulated connecting element in white polycarbonate; it is not a mechanical support; it allows the passage of power-supply line. It must always be coupled with 2 elements for branch connection (cod. A0033).

Code

Item

A0038

White articulated connecting element

Pair of end cap cover elements (in white polycarbonate), complete with fixing bolts.

Code

Item

A0039

Pair of white end caps Fil 180

A0040

Pair of white end caps Fil 220

Concealed sliding bracket for free positioning, in galvanized steel, for mounting to or suspension from the ceiling. It can be adjusted at two heights to position the structure at distances of 16 or 21 mm from the ceiling. It allows mounting also on normally flammable surfaces.

Code

Item

A0042

Fil 180 SS (sliding bracket)

A0043

Fil 220 SS (sliding bracket)

Suspension composed by: polycarbonate ceiling white rose Ø 110 mm, stainless steel cable Ø 1,25 mm (length 1 m), quick adjuster, white power cable 1,5 mm² section, H05VV-F (length 2 m). Code

Item

A0124

Rose 110 (Adjust. susp.1m unwired)

A0125

Rose 110 (Adjust. susp.1m wired with 4-pole cable)

A0114

Rose 110 (Adjust. susp.1m wired with 5-pole cable)

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Filigare Accessories Adjustable suspension for continuous channel composed of white polycarbonate case, internal bracket in galvanized steel, cables Ø 2 mm in galvanized steel, quick adjusters, maximum load 50 Kg. Code

Item

A0045

Adjustable suspension for channel 1m

A0046

Adjustable suspension for channel 1.5m

A0047

Adjustable suspension for channel 2m

A0762

Adjustable suspension for channel 3m

A0766

Adjustable suspension for channel 4m

A0770

Adjustable suspension for channel 6m

For continuous channel it is always necessary to use the sliding bracket (cod. A0042). On request steel cable, spool of 100 or 500 m.

Coil of stainless steel cable “Ø 1.25 mm”, length 100 m. Code

Item

A0620

Spool with stainless steel cable diam. 1,25mm 100 m

Clamps in nickel-plated brass suitable for fixing of steel wire (diameter 1.25 mm - 1.5 mm - 2 mm), complete with locking screws. Code

Item

A0622

Clamp 1 hole - 100 pcs

Electrical socket with white polycarbonate ceiling rose Ø 86 mm, white cable 4x1.5 mm², H05VV-F (length 2 m).

Code

Item

A0130

Rose 86 (4-pole wired boss)

Cable clip in polycarbonate, snap-lock fastening in side compartment; it is advisable to use it every meter.

Code

Item

A0053

Fil 19 BF (cable clip)

Surface luminaires and suspensions

Filigare Accessories Lamp holder for variable focusing for Filigare 220 T8 with flow recuperator, in white polycarbonate, for wide or asymmetric distribution. For n° 2 lamps. Code

Item

A0051

34 MF (variable lamp focusing Fil 220 T8)

SP flat diffuser for Filigare single or channel luminaires with flow recuperator, in transparent polycarbonate, UV stabilized, self-extinguishing V2. Code

Item

A0058

Flat diffuser PC transp. Fil180 36 sing.

A0059

Flat diffuser PC transp. Fil180 58 sing.

A0846

Flat diffuser PC transp. Fil180 28-54 sing.

A0847

Flat diffuser PC transp. Fil180 35-49 -80 sing.

A0848

Flat diffuser PC transp. Fil180 28-54 chan.

A0849

Flat diffuser PC transp. Fil180 35-49 -80 chan.

A0064

21 RD (PC single diffuser transp. 36 WFil220)

A0065

21 AT (PC single diffuser transp. 58 WFil220)

A0862

Flat diffuser PC transp. Fil220 28-54 sing.

A0863

Flat diffuser PC transp. Fil220 35-49-80 sing.

A0864

Flat diffuser PC transp. Fil220 28-54 chan.

A0865

Flat diffuser PC transp. Fil220 35-49-80 chan.

SP diffuser for Filigare 180 T8 single or channel luminaires with flow recuperator, in transparent polycarbonate, UV stabilised, injection moulded with smooth outer surface and differentiated prismatic inner surface. Code

Item

A0060

21 V2 (PC diffuser 58W Fil180/3F1)

A0062

21 V2C (PC diffuser 36W Fil180/3F1)

A0061

21 V0 (PC diffuser 58W Fil180/3F1)

A0063

21 V0C (PC diffuser 36W Fil180/3F1)

White closing strip in PVC to be attached by fitting into position in Filigare 180 structure.

Code

Item

A0016

32 IF (PVC closing top Fil 180-620)

A0018

32 MH (PVC closing top Fil 180-1240)

A0019

32 HA (PVC closing top Fil 180-1550)

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Filigare Accessories White closing strip in steel, to be attached by fitting into position in Filigare 180-220 structure.

Code

Item

A0021

Fil 180 AB620 (steel closing top)

A0023

Fil 180 AB1240 (steel closing top)

A0024

Fil 180 AB1550 (steel closing top)

A0026

Fil 220 AB620 (steel closing top)

A0028

Fil 220 AB1240 (steel closing top)

A0029

Fil 220 AB1550 (steel closing top)

On request: in RAL colour.

Wall-mounting bracket for Filigare 180, in white painted steel, suitable for mounting on the sliding bracket (cod. 0042) (always necessary).

Code

Item

A0052

Fil 15 FP (wall-mounting bracket Fil 180)

Surface luminaires and suspensions

Fly2 LED LED pendant luminaire for energy-efficient systems

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics Symmetric direct-indirect distribution. Average luminance <3000 cd/m² for radial angles >65°. Lifetime (L90/B10): 30000 h. (Tp 60°C) Lifetime (L85/B10): 50000 h. (Tp 60°C) Lifetime (L75/B10): 80000 h. (Tp 60°C) Photobiological safety RG0 unlimited, risk absent, in compliance with IEC 62471, IEC/TR 62778.

• Linear LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 2.

Environments: staterooms, with VDTs, meeting rooms, offices. Environments where soft diffuse light is required for optimal visual comfort.

On request

Light Management

• different powers or colour temperatures • housing and accessories in RAL colours • wiring: non dimmable

The DALI products of this family can be controlled manually with the technology “3F Easy” or even automatically and manually using the “3F Smart Dimming” technology (see “Light Management” chapter).

Mechanical characteristics Housing and end caps in white painted aluminium. End caps cover elements in white polycarbonate. Suspensions always necessary, see accessories.

Accessories Accessories on page 96.

Electrical characteristics DALI electronic wiring 230V-50/60Hz. In compliance with EN 60598-1.

Dimensions

H A

H L

Surface luminaires and suspensions

Fly2 LED Fly2 LED B SP Code 12120

Average luminance <3000 cd/m² for radial angles >65°. Flow recuperators in specular aluminium, high efficiency. Upper diffuser in translucent polycarbonate. SP lower diffuser in prismatic transparent PMMA.

L<3000 cd/m² 65° E=100% Code

Item

DALI electronic 12120 Fly2 LED B 2x24W DALI SP L1316

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

6557

1316x320x61

New

Fly2 Free-standing LED LED floor-standing luminaire for energy efficient systems

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics Indirect, direct distribution. Maximum spread of the indirect luminous flux, for lighting uniformity on ceiling. Average luminance <3000 cd/m² for radial angles >65°. Lifetime (L90/B10): 30000 h. (Tp 60°C) Lifetime (L85/B10): 50000 h. (Tp 60°C) Lifetime (L75/B10): 80000 h. (Tp 60°C) Photobiological safety RG0 unlimited, risk absent, in compliance with IEC 62471, IEC/TR 62778.

• Linear LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 2.

Environments: staterooms, with VDTs, offices. Environments where soft diffuse light is required for optimal visual comfort. Environments which cannot, for technical reasons, be equipped with points of light directed onto the ceiling. Open-space offices and environments in which a high degree of workstation flexibility is required.

Mechanical characteristics Housing and end caps in white painted aluminium. End caps cover elements in white polycarbonate. Flux recuperator in specular aluminium, high efficiency. Upper diffuser in translucent polycarbonate. Lower flat diffuser in PMMA transparent, prismatic, with anti-glare filter in white micro-perforated steel. Rectangular section 25x50 mm white pole. Base in white painted steel with level adjusters and nonslip rubber tips. IP40 protection degree. Electrical characteristics Electronic wiring 230V-50/60Hz. In compliance with EN 60598-1. Power-supply with black cable 2.5 m long, schuko plug and foot switch.

On request • housing in grey RAL 9006 • twin-circuit • version for installation on desks and tables • version with integrated sensor or table console

Dimensions A

Surface luminaires and suspensions

Fly2 Free-standing LED Fly2 Free-standing LED Code 15896

Average luminance <3000 cd/m² for radial angles >65°. Flow recuperators in specular aluminium, high efficiency. Upper diffuser in translucent polycarbonate. SPM lower diffuser in transparent PMMA prismatic with anti-glare filter in white micro-perforated steel.

L<3000 cd/m² 65° E=100% Code

Item

Electronic 15896 New Fly2 Piantana LED 5x10W SPM L717

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

5363

717x320x2047

Fly2 Fluo Suspension luminaire with direct and indirect light distribution

Construction characteristics

Source characteristics

Accessories

Illuminotechnical characteristics High luminous efficiency >80%. Direct-indirect diffused distribution.

• T5 fluorescent lamps, mounted, CCT nominal color temperature 4000 K, color rendering index CRI >80. Fly 2 is equipped with MultiWatt wiring which allows the lamps to be changed, for example: • 28 to 54W or vice versa • 35 to 49W or vice versa This allows the level of illumination to be optimised when changing the use of the room the product is installed in.

Accessories on page 96.

Mechanical characteristics Housing and end caps in white RAL 9010 (B) or grey RAL 9006 (GR) painted aluminium. Flow recuperators in semi-specular aluminium, high efficiency. Upper diffuser in transparent polycarbonate and lower diffuser in PMMA for lampcompartment closure. End caps cover elements in white polycarbonate on white housing and grey polycarbonate on grey housing. Suspensions always necessary, see accessories. Electrical characteristics EEI A2 multiwatt electronic wiring, 230V-50/60Hz, lamp warm start. DALI MultiWatt EEI A1 electronic wiring, 230V-50/60Hz, lamp warm start. In compliance with EN 60598-1. Twin-circuit in 4x35 and 4x49 versions. EP maintained emergency wiring on one single lamp, 1hr duration with 24hrs recharge, fuse. In compliance with EN 60598-2-22.

Applications Environments where soft diffuse light is required for optimal visual comfort. SPM version Environments: staterooms, with VDTs, meeting rooms, offices. For uniform light on ceiling, we recommend suspending the luminaire at a minimum distance of 30 cm.

On request

Light Management

• lamps in different powers or colour temperatures • luminaires for white painted luminous channels • housing in different RAL colours • fuse accessory (on page 472) • wiring: emergency • emergency inhibition

Dimensions

H A

H L

Surface luminaires and suspensions

Fly2 Fluo Fly2 B SPM - GR SPM Code 15426

2x - Average luminance <1000 cd/m² for radial angles >65°. 4x - Average luminance <2000 cd/m² for radial angles >65°. Flow recuperators in semi-specular aluminium, high efficiency. Upper diffuser in transparent polycarbonate. SPM lower diffuser in transparent PMMA prismatic with anti-glare filter in white micro-perforated steel. L<1000 cd/m² 65° E>80% Indirect E>65% Direct E>15% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

White housing - EEI A2 electronic wiring - Pre-mounted lamps 15428 Fly2 B 2x49 T5 LD HF SPM 106

8600

1616x320x61

15426

Fly2 B 2x54 T5 LD HF SPM

114

8900

1316x320x61

15433

Fly2 B 4x49 T5 LD HF DA SPM

212

17200

1616x320x61

106

8600

1616x320x61

White housing - DALI EEI A1 electronic - Pre-mounted lamps 16060 Fly2 B 2x49 T5 LD HF DALI SPM 16058

Fly2 B 2x54 T5 LD HF DALI SPM

114

8900

1316x320x61

16067

Fly2 B 4x49 T5 LD HF DALI SPM

212

17200

1616x320x61

White housing - EP emergency, fuse - Pre-mounted lamps 15441 Fly2 B 2x54 T5 LD HF EP SPM

114

8900

1316x320x61

Grey housing - EEI A2 electronic wiring - Pre-mounted lamps 15698 Fly2 GR 2x49 T5 LD HF SPM

106

8600

1616x320x61

15696

Fly2 GR 2x54 T5 LD HF SPM

114

8900

1316x320x61

15703

Fly2 GR 4x49 T5 LD HF DA SPM

212

17200

1616x320x61

Grey housing - DALI EEI A1 electronic - Pre-mounted lamps 16144 Fly2 GR 2x49 T5 LD HF DALI SPM

106

8600

1616x320x61

16142

Fly2 GR 2x54 T5 LD HF DALI SPM

114

8900

1316x320x61

16151

Fly2 GR 4x49 T5 LD HF DALI SPM

212

17200

1616x320x61

Grey housing - EP emergency, fuse - Pre-mounted lamps 15713 Fly2 GR 2x49 T5 LD HF EP SPM

106

8600

1616x320x61

15711

114

8900

1316x320x61

Fly2 GR 2x54 T5 LD HF EP SPM

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Fly2 Fluo Fly2 GR SPM IFC Code 17479

2x - Average luminance <1000 cd/m² for radial angles >65°. Flow recuperators in semi-specular aluminium, high efficiency. Upper diffuser in transparent polycarbonate. SPM lower diffuser in transparent PMMA prismatic with anti-glare filter in white micro-perforated steel. LUMINAIRES WITH COVER ELEMENTS PRE-ARRANGED TO OBTAIN LUMINOUS CHANNELS, CONNECTING ELEMENT IS ALWAYS NECESSARY. L<1000 cd/m² 65° E>76% Indirect E>62% Direct E>14% Code

Item

Grey housing - DALI EEI A1 electronic - Pre-mounted lamps 17479 Fly2 GR 2x49 T5 LD HF DALI SPM IFC

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

106

8600

1616x320x61

Fly2 B SP - GR SP Code 15741

Flow recuperators in semi-specular aluminium, high efficiency. Upper diffuser in transparent polycarbonate. SP lower diffuser in prismatic transparent PMMA.

E>91% Indirect E>57% Direct E>34% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

White housing - EEI A2 electronic wiring - Pre-mounted lamps 15470 Fly2 B 2x28 T5 LD HF SP 60

5200

1316x320x61

15471

Fly2 B 2x54 T5 LD HF SP

114

8900

1316x320x61

15478

Fly2 B 4x49 T5 LD HF DA SP

212

17200

1616x320x61

5200

1316x320x61

Grey housing - EEI A2 electronic wiring - Pre-mounted lamps 15740 Fly2 GR 2x28 T5 LD HF SP 15741

Fly2 GR 2x54 T5 LD HF SP

114

8900

1316x320x61

15748

Fly2 GR 4x49 T5 LD HF DA SP

212

17200

1616x320x61

Surface luminaires and suspensions

Fly2 Fluo Fly2 B Opal Code 15381

Flow recuperators in semi-specular aluminium, high efficiency. Upper diffuser in transparent polycarbonate. OP lower diffuser in PMMA opal PMMA.

E>80% Indirect E>54% Direct E>26% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

White housing - EEI A2 electronic wiring - Pre-mounted lamps 15380 Fly2 B 2x28 T5 LD HF OP 60

5200

1316x320x61

15381

Fly2 B 2x54 T5 LD HF OP

114

8900

1316x320x61

15388

Fly2 B 4x49 T5 LD HF DA OP

212

17200

1616x320x61

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Fly2 Accessories Adjustable suspension with polycarbonate case in white colour, internal bracket in galvanized steel. Wired version with transparent power cable 5x1.5 mm². Stainless steel cables, length 1 m, leaded at one end with adjusters for coupling on the luminaire.

Code

Item

A01318

White rectangular case suspension-adj. 1 m

A01325

Wired suspension 5P white rectangular case-adj.1 m

On request: for suspensions longer than 1 m, it is necessary not only to order codes 01318-01325 but also stainless steel cables in spool of 100 m and pack of n° 100 clamps.

Coil of stainless steel cable “Ø 1.25 mm”, length 100 m. Code

Item

A0620

Spool with stainless steel cable diam. 1,25mm 100 m

Clamps in nickel-plated brass suitable for fixing of steel wire (diameter 1.25 mm - 1.5 mm - 2 mm), complete with locking screws. Code

Item

A0622

Clamp 1 hole - 100 pcs

Presence and light sensor with cover, to be installed on one end of the luminaire, that which is mostly influenced by the natural light or by the presence of people in the working zone, usable only in HF DALI dimmable wiring, it can control up to 4 ballasts. Code

Item

A01350

Presence and light sensor Fly2 B

A01351

Presence and light sensor Fly2 GR

Linear connecting element for channels, to be used with luminaires IFC, made of painted steel gray RAL 9006, with upper holes for suspension. It allows the passage of power-supply cable and spaces the luminaires of 40 mm.

Code

Item

A01353

Connecting element for Fly2 GR

Surface luminaires and suspensions

P 200 LED LED ceiling luminaire for high energy efficiency systems

Construction characteristics

Source characteristics

Applications

• Linear LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. 10W version • Color initial tolerance (MacAdam): 2. 24W, 30W versions • Color initial tolerance (MacAdam): 3.

2US version Environments: with VDTs, schools, offices. SP version Environments: staterooms, with VDTs, offices. Environments with exacting visual tasks, where diffused soft light for optimum visual comfort is required. OP version Environments where demanding visual tasks are performed and soft diffuse light is required for optimal visual comfort and total shielding of the light source.

Mechanical characteristics Housing in white painted steel. 2US parabolic louvre in semi-glossy aluminium with transverse blades closed at the top and prismatic PMMA diffusers for total shielding of the louvre compartment. SP transparent PMMA diffuser, prismatic, anti-glare, locked to the pre-painted white aluminium perimeter frame with sealing gasket, hinged opening. OP opal PMMA flat diffuser, anti-glare, locked to the pre-painted white aluminium perimeter frame with sealing gasket, hinged opening. Electrical characteristics Electronic wiring 230V-50/60Hz. In compliance with EN 60598-1.

On request • parabolic louvres 2M, 2MG, 3AO • different powers or colour temperatures • diffuser in SMP microprismatic PMMA or SP polycarbonate, Selfextinguishing V2 • housing and accessories in RAL colours • wiring: dimmable, emergency

Dimensions

H A H L

Surface luminaires and suspensions

P 200 LED P 200 LED 2US Code 12680

Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 12675 P 201x30W LED 2US 156x1531

3324

1531x156x82

12692

3537

596x596x82

P 203x10W LED 2US 596x596

12687

P 202x24W LED 2US 270x1231

5221

1231x270x82

12680

P 202x24W LED 2US 196x1231

5544

1231x196x82

12689

P 202x30W LED 2US 270x1531

6528

1531x270x82

12682

P 202x30W LED 2US 196x1531

6929

1531x196x82

P 200 LED SP Code 12708

10W - Average luminance <3000 cd/m² for radial angles >65°. SP transparent PMMA diffuser, prismatic exterior, anti-glare, locked to the prepainted white aluminium perimeter frame with sealing gasket, hinged opening.

L<3000 cd/m² 65° E=100% Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 12720 P 203x10W LED SP 596x596

3935

596x596x82

12703

3939

1531x156x82

P 201x30W LED SP 156x1531

12722

P 204x10W LED SP 596x596

5207

596x596x82

12708

P 202x24W LED SP 196x1231

6249

1231x196x82

12710

P 202x30W LED SP 196x1531

7819

1531x196x82

Datasheets, product updates and specifications on our website: www.3f-filippi.com

P 200 LED P 200 LED Opal Code 12736

High visual comfort. OP opal PMMA flat diffuser, anti-glare, locked to the pre-painted white aluminium perimeter frame with sealing gasket, hinged opening.

E=100% Code

Item

Electronic 12748 P 203x10W LED OP 596x596

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

3491

596x596x82

12731

P 201x30W LED OP 156x1531

3494

1531x156x82

12750

P 204x10W LED OP 596x596

4620

596x596x82

12736

P 202x24W LED OP 196x1231

5545

1231x196x82

12738

P 202x30W LED OP 196x1531

6938

1531x196x82

100

Surface luminaires and suspensions

P 200 Fluo Ceiling luminaire

Construction characteristics

On request

Applications

Illuminotechnical characteristics Direct symmetric distribution.

• fuse accessory (on page 472) • wiring: dimmable, twin-circuit, emergency

2M, 2MG, 2US versions Environments: with VDTs, schools, offices.

Mechanical characteristics Housing in white painted steel. Parabolic louvres with transverse blades closed at the top. Film protective against dust and finger marks, adhesive, attached to louvre. Electrical characteristics EEI A2 electronic wiring, 230V-50/60Hz, lamp warm start. In compliance with EN 60598-1.

Dimensions

H A H L

102

Surface luminaires and suspensions

P 200 Fluo P 200 2M Code 10030

Average luminance <200 cd/m² for radial angles >65°. 1000W - Average luminance <65 cd/m² for radial angles >°. 2M parabolic louvre in specular aluminium, with transverse blades closed at the top. Film protective against dust and finger marks, adhesive, attached to louvre. L<1000 cd/m² 65° E>63% Code

Item

EEI A2 electronic wiring - Lamps not included 10025 P 201x18 HF 2M

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

1350

622x156x82

10028

P 202x18 HF ST 2M

2700

622x196x82

10026

P 201x36 HF 2M

3350

1231x156x82

10033

P 203x18 HF 2M

4050

622x596x82

10027

P 201x58 HF 2M

5200

1531x156x82

10034

P 204x18 HF 2M

5400

622x596x82

10029

P 202x36 HF ST 2M

6700

1231x196x82

10031

P 202x36 HF 2M

6700

1231x270x82

10030

P 202x58 HF ST 2M

109

10400

1531x196x82

10032

P 202x58 HF 2M

109

10400

1531x270x82

Datasheets, product updates and specifications on our website: www.3f-filippi.com

103

P 200 Fluo P 200 2MG Code 10270

Average luminance <200 cd/m² for radial angles >65°. 1000W - Average luminance <65 cd/m² for radial angles >°. 2MG parabolic louvre, high efficiency, in specular aluminium with superficial titanium-magnesium treatment, non-iridescent, with transverse blades closed at the top. Film protective against dust and finger marks, adhesive, attached to louvre. L<1000 cd/m² 65° E>71% Code

Item

EEI A2 electronic wiring - Lamps not included 10265 P 201x18 HF 2MG

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

1350

622x156x82

10268

P 202x18 HF ST 2MG

2700

622x196x82

10266

P 201x36 HF 2MG

3350

1231x156x82

10273

P 203x18 HF 2MG

4050

622x596x82

10267

P 201x58 HF 2MG

5200

1531x156x82

10274

P 204x18 HF 2MG

5400

622x596x82

10269

P 202x36 HF ST 2MG

6700

1231x196x82

10271

P 202x36 HF 2MG

6700

1231x270x82

10270

P 202x58 HF ST 2MG

109

10400

1531x196x82

10272

P 202x58 HF 2MG

109

10400

1531x270x82

104

Surface luminaires and suspensions

P 200 Fluo P 200 2US Code 10090

Average luminance <200 cd/m² for radial angles >65°. 1000W - Average luminance <65 cd/m² for radial angles >°. 2US parabolic louvre in semi-glossy aluminium, anti-glare, with transverse blades closed at the top. Film protective against dust and finger marks, adhesive, attached to louvre. L<1000 cd/m² 65° E>62% Code

Item

EEI A2 electronic wiring - Lamps not included 10085 P 201x18 HF 2US

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

1350

622x156x82

10088

P 202x18 HF ST 2US

2700

622x196x82

10086

P 201x36 HF 2US

3350

1231x156x82

10093

P 203x18 HF 2US

4050

622x596x82

10087

P 201x58 HF 2US

5200

1531x156x82

10094

P 204x18 HF 2US

5400

622x596x82

10089

P 202x36 HF ST 2US

6700

1231x196x82

10091

P 202x36 HF 2US

6700

1231x270x82

10090

P 202x58 HF ST 2US

109

10400

1531x196x82

10092

P 202x58 HF 2US

109

10400

1531x270x82

Datasheets, product updates and specifications on our website: www.3f-filippi.com

105

P 200 Fluo IP54 Ceiling luminaire with high level of ingress protection

Construction characteristics

On request

Applications

Illuminotechnical characteristics Direct symmetric distribution.

• RSP PC version with polycarbonate diffuser • fuse accessory (on page 472) • wiring: dimmable, twin-circuit, emergency

Particularly suitable for environments where protection against water and dust is required, such as hospitals, pharmaceutical and chemical laboratories. The Multiwatt wiring also makes it suitable following changes in previously intended use of the environment. In environments with foodstuffs or machines with moving parts, with considerable sudden temperature changes, and in general in any environments requiring total protection against falling fragments, use the P 200 T5 IP54 RSP PC version (polycarbonate diffuser and flux recuperator) on request or specific IP65 luminaires with laminated glass and suitable frame. Tempered glass is not immune to falling fragments from harmless and caused by shocks or exceptionally derived from the tempering process.

Mechanical characteristics Housing in white painted steel with sealing gasket. White painted flow recuperator, high reflection. VS moulded glass, anti-glare, tempered, non-combustible, thickness 4 mm, locked to the white painted aluminium perimetrical frame, hinged opening. SP transparent PMMA diffuser, prismatic, anti-glare, locked to the pre-painted white aluminium perimeter frame, hinged opening. Electrical characteristics EEI A2 multiwatt electronic wiring, 230V-50/60Hz, lamp warm start. 4x14-24 version in twin-circuit execution. In compliance with EN 60598-1.

Dimensions

H A H L

106

Surface luminaires and suspensions

P 200 Fluo IP54 P 200 Fluo RVS IP54 Code 10546

Moulded anti-glare glass, tempered.

E>60% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

Electronic MultiWatt EEI A2 - Lamps not included 10548 P 204x14-24 T5 HF DA RVS IP54

62-98

4800-7000

596x596x82

10546

60-114

5200-8900

1196x270x82

P 202x28-54 T5 HF RVS IP54

P 200 Fluo RSP IP54 Code 10572

SP flat diffuser in transparent PMMA, outside prismatic, anti-glare.

E>60% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

Electronic MultiWatt EEI A2 - Lamps not included 10574 P 204x14-24 T5 HF DA RSP IP54

62-98

4800-7000

596x596x82

10572

60-114

5200-8900

1196x270x82

P 202x28-54 T5 HF RSP IP54

Datasheets, product updates and specifications on our website: www.3f-filippi.com

107

Zero 3F LED LED luminaire for high energy efficiency systems

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics Diffused symmetric distribution. Average luminance <3000 cd/m² for radial angles >65°. Lifetime (L90/B10): 30000 h. (Tp 60°C) Lifetime (L85/B10): 50000 h. (Tp 60°C) Lifetime (L75/B10): 80000 h. (Tp 60°C) Photobiological safety RG0 unlimited, risk absent, in compliance with IEC 62471, IEC/TR 62778.

• Linear LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3.

Environments: recreational, transit areas, corridors, schools, stairwells. Environments requiring a high level of protection, high levels of light, source shielding and simplified cleaning. Luminaire optimised to replace previously installed Zero 3F Fluorescent luminaires thanks to the same fixing points.

Mechanical characteristics Housing in white painted pressed steel. Diffuser in transparent PMMA, multilenticular, anti-glare, injection moulded.

On request • impact protection wire guards • wiring: dimmable, emergency wiring (9W-18W excluded) • IP54 versions

Electrical characteristics Electronic wiring 230V-50/60Hz. In compliance with EN 60598-1.

Dimensions

H A H L

108

Surface luminaires and suspensions

Zero 3F LED Zero 3F LED Rectangular Code 12505

Average luminance <3000 cd/m² for radial angles >65°. Diffuser in transparent PMMA, multilenticular, anti-glare, injection moulded.

L<3000 cd/m² 65° E=100% Code

Item

Electronic 12491 03F LED 1x9W L640

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

1386

640x110x85

12493

03F LED 1x18W L1250

2769

1250x110x85

12501

03F LED 2x9W L640

2780

640x210x68

12495

03F LED 1x22W L1550

3460

1550x110x85

12503

03F LED 2x18W L1250

5566

1250x210x68

12505

03F LED 2x22W L1550

6953

1550x210x68

Zero 3F LED Squadred Code 12508

9W - Average luminance <3000 cd/m² for radial angles >65°. Diffuser in transparent PMMA, multilenticular, anti-glare, injection moulded.

L<3000 cd/m² 65° E=100% Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 12507 03F LED 4x6W 350x350

3588

350x350x68

12508

5547

640x640x68

03F LED 4x9W 640x640

Datasheets, product updates and specifications on our website: www.3f-filippi.com

109

Zero 3F Fluo Ceiling luminaire

Construction characteristics

On request

Applications

Illuminotechnical characteristics Diffused symmetric distribution.

• impact protection wire guards • fuse accessory (on page 472) • wiring: electronic, dimmable, emergency • polycarbonate versions • IP54 versions • luminaire suitable for installation on flammable surfaces

Environments: recreational, transit areas, corridors, schools, stairwells. Environments requiring a high level of protection, high levels of light, lamp shielding and simplified cleaning.

Mechanical characteristics Housing in white painted pressed steel. Diffuser in transparent PMMA, multilenticular, anti-glare, injection moulded. Electrical characteristics EEI B2 low loss starter wiring, 230V-50Hz, power factor correction. In compliance with EN 60598-1.

Dimensions

H A H L

110

Surface luminaires and suspensions

Zero 3F Fluo Zero 3F R Code 1440

Diffuser in transparent PMMA, multilenticular, anti-glare, injection moulded.

E>65% Code

Item

Starter EEI B2 - Lamps not included 1435 03F 1x18

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

1350

640x110x85

1438

03F 2x18

2700

640x210x68

1436

03F 1x36

3350

1250x110x85

1437

03F 1x58

5200

1550x110x85

1439

03F 2x36

6700

1250x210x68

1441

03F 3x36

129

10050

1250x300x68

1440

03F 2x58

134

10400

1550x210x68

Zero 3F Squadred Code 1446

Diffuser in transparent PMMA, multilenticular, anti-glare, injection moulded.

E>64% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

Square version 350x350 - Starter EEI B2 - Lamps not included 1443 03F 1x22

1250

350x350x68

1444

2050

350x350x68

Square version 450x450 - Starter EEI B2 - Lamps not included 1445 03F 2x32+40

4950

450x450x68

Square version 640x640 - Starter EEI B2 - Lamps not included 1446 03F 4x18

5400

640x640x68

03F 1x32

Datasheets, product updates and specifications on our website: www.3f-filippi.com

111

New

3F Quadro LED LED luminaire for high energy efficiency systems

Construction characteristics

Source characteristics

Applications

• Linear LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3.

Environments: commercial, exhibition areas, industrial. Environments where high levels of light are required.

On request • wiring: dimmable, single-circuit

Mechanical characteristics Housing in galvanized steel, powdercoated in white epoxy-polyester. Quick connection in polycarbonate M20x1.5 cable gland for access to the terminal block. Total flux recuperator for wide distribution, in specular aluminium with titaniummagnesium surface treatment, non-iridescent. SP transparent PMMA diffuser, prismatic, anti-glare, locked to the pre-painted white aluminium perimeter frame, hinged opening. Fixing brackets.

Accessories Accessories on page 113.

Dimensions Electrical characteristics Electronic wiring 230V-50/60Hz. In compliance with EN 60598-1. Quick connection. It is no longer necessary to open the luminaires to connect them: with a simple and fast operation, just take the terminal block out of the top slot and make the connection. Twin-circuit.

112

A=L

Surface luminaires and suspensions

3F Quadro LED 3F Quadro LED Code 4702

Total flux recuperator for wide distribution, in specular aluminium with titaniummagnesium surface treatment, non-iridescent. SP transparent methacrylate diffuser, prismatic exterior, anti-glare, locked to the prepainted white aluminium perimeter frame, hinged opening.

E=100% Code

Item

Electronic 4702 3F Quadro LED 100W DA CR SP IP43

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

110

13254

620x620x180

Accessories Ceiling-mounted bracket in hot-galvanised steel. Code

Item

A0213

Ceiling-mounted bracket

Datasheets, product updates and specifications on our website: www.3f-filippi.com

113

Barraluce P LED LED channel system for high energy efficiency systems

Construction characteristics

Source characteristics

Applications

• Linear LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3.

Environments: with VDTs, meeting rooms, offices. Environments: architectural, commercial, staterooms, banks. Environments where dynamic, soft and diffuse light is required for optimal visual comfort.

Mechanical characteristics Corps in natural anodised extruded aluminium. Removable gear-tray, functions as flux recuperator, in specular aluminium, high efficiency, with titanium-magnesium surface treatment, non-iridescent. Electrical characteristics Electronic wiring 230V-50/60Hz. In compliance with EN 60598-1. 1+1 wiring in twincircuit. Upper power entry near an end cap. Channel luminaires: through-wiring, 5-pole, 2.5mm² section with irreversible fastconnection plug/socket, with irreversible fast-connection socket for branch, connecting to the socket positioned on the gear-tray unit.

On request • wiring: dimmable, emergency • possibility to create lighting corners

Accessories Accessories on page 122.

Dimensions

Single L

Channel L

114

Surface luminaires and suspensions

Barraluce P LED Barraluce P LED Opal - Single Code 12787

Luminaire for standalone installation with aluminium end caps. OP opal methacrylate flat diffuser, anti-glare.

E=100% Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 12787 Barraluce P 1x30W LED OP L1471

2830

1471x99x100

12789

5661

2937x99x100

Barraluce P 1+1x30W LED OP L2937

Barraluce P LED Opal - Channel Code 12797

Luminaire for continuous channel installation (end caps not included). OP opal methacrylate flat diffuser, anti-glare.

E=100% Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 12795 Barraluce P 1x30W LED OP 5P L1466

2830

1466x99x100

12797

5661

2932x99x100

Barraluce P 1+1x30W LED OP 5P L2932

Datasheets, product updates and specifications on our website: www.3f-filippi.com

115

Barraluce P LED Barraluce P LED SP - Single Code 12771

Average luminance <3000 cd/m² for radial angles >65°. Luminaire for standalone installation with aluminium end caps. SP flat diffuser in PMMA transparent prismatic methacrylate, anti-glare.

L<3000 cd/m² 65° E=100% Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 12771 Barraluce P 1x30W LED SP L1471

3188

1471x99x100

12773

6377

2937x99x100

Barraluce P 1+1x30W LED SP L2937

Barraluce P LED SP - Channel Code 12781

Average luminance <3000 cd/m² for radial angles >65°. Luminaire for continuous channel installation (end caps not included). SP flat diffuser in PMMA transparent prismatic methacrylate, anti-glare.

L<3000 cd/m² 65° E=100% Code

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 12779 Barraluce P 1x30W LED SP 5P L1466

3188

1466x99x100

12781

6377

2932x99x100

116

Item

Barraluce P 1+1x30W LED SP 5P L2932

Surface luminaires and suspensions

Barraluce P Opal Fluo Fluorescent channel system with high visual comfort

Construction characteristics

On request

Applications

Illuminotechnical characteristics Direct diffused distribution.

• micro-prismatic diffuser • fuse accessory (on page 472) • wiring: dimmable, emergency

Environments: architectural, commercial, staterooms, banks, shops, offices. Environments where dynamic, soft and diffuse light is required for optimal visual comfort.

Mechanical characteristics Corps in natural anodised extruded aluminium. Removable gear-tray functioning as flow recuperator, in high reflection white painted steel. OP flat diffuser in opal PMMA.

Accessories Accessories on page 122.

Electrical characteristics EEI A2 multiwatt electronic wiring, 230V-50/60Hz, lamp warm start. In compliance with EN 60598-1. Upper power entry near an end cap. Channel luminaires: through-wiring, 5-pole, 2.5mm² section with irreversible fastconnection plug/socket, with irreversible fast-connection socket for branch, connecting to the socket positioned on the gear-tray unit. Lamps excluded.

Dimensions Single L

IFC 1x A

L IFC 1+1x L IC L

118

Surface luminaires and suspensions

Barraluce P Opal Fluo Barraluce P Opal - Single Code 170221

Luminaire for standalone installation with aluminium end caps. OP opal methacrylate flat diffuser, anti-glare.

E>50% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

Electronic MultiWatt EEI A2 - Lamps not included 170215 Barraluce P 1x28-54 T5 HF OP

31-58

2600-4450

1184x99x100

170221

38-53-86

3300-4300-6150

1484x99x100

Barraluce P 1x35-49-80 T5 HF OP

Barraluce P Opal - Channel Code 172012

Luminaire for continuous channel installation (end caps not included), with light continuity even in the junction. OP opal methacrylate flat diffuser, anti-glare.

E>50% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

IFC Start/End Channel - Electronic MultiWatt EEI A2 - Lamps not included 172005 Barraluce P 1x28-54 T5 HF OP IFC 5P 31-58

2600-4450

1122x99x100

172012

Barraluce P 1x35-49-80 T5 HF OP IFC 5P

38-53-86

3300-4300-6150

1422x99x100

172019

Barraluce P 1+1x28-54 T5 HF OP IFC 5P

60-114

5200-8900

2191x99x100

172026

Barraluce P 1+1x35-49-80 T5 HF OP IFC 5P

76-106-170

6600-8600-12300

2791x99x100

IC Channel Intermediate - Electronic MultiWatt EEI A2 - Lamps not included 172507 Barraluce P 1+1x28-54 T5 HF OP IC 5P 60-114 5200-8900

2138x99x100

172514

2738x99x100

Barraluce P 1+1x35-49-80 T5 HF OP IC 5P

Datasheets, product updates and specifications on our website: www.3f-filippi.com

76-106-170

6600-8600-12300

119

Barraluce P 2MG Fluo Fluorescent channel system with luminance control

Construction characteristics

On request

Applications

Illuminotechnical characteristics Direct symmetric distribution. Average luminance <1000 cd/m² for radial angles >65°.

• fuse accessory (on page 472) • wiring: dimmable, emergency

Environments: architectural, commercial, staterooms, with VDTs, banks, shops, offices. Environments where demanding visual tasks are performed and comfortable lighting is required.

Mechanical characteristics Corps in natural anodised extruded aluminium. Removable gear-tray in white painted steel. 2MG parabolic louvre, high efficiency, in specular aluminium with superficial titanium-magnesium treatment, noniridescent, with transverse blades closed at the top. Film protective against dust and finger marks, attached to louvre. Electrical characteristics EEI A2 multiwatt electronic wiring, 230V-50/60Hz, lamp warm start. In compliance with EN 60598-1. Upper power entry near an end cap. Channel luminaires: through-wiring, 5-pole, 2.5mm² section with irreversible fastconnection plug/socket, with irreversible fast-connection socket for branch, connecting to the socket positioned on the gear-tray unit. Lamps excluded.

Accessories Accessories on page 122.

Dimensions Single L

IFC 1x A

L IFC 1+1x L IC L

120

Surface luminaires and suspensions

Barraluce P 2MG Fluo Barraluce P 2MG - Single Code 171543

Luminaire for standalone installation with aluminium end caps. 2MG parabolic louvre, high efficiency, in specular aluminium with superficial titanium-magnesium treatment, non-iridescent, with transverse blades closed at the top. Film protective against dust and finger marks, adhesive, attached to louvre. L<1000 cd/m² 65° E>75% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

Electronic MultiWatt EEI A2 - Lamps not included 171536 Barraluce P 1x28-54 T5 HF 2MG

31-58

2600-4450

1184x99x105

171543

38-53-86

3300-4300-6150

1484x99x105

Barraluce P 1x35-49-80 T5 HF 2MG

Barraluce P 2MG - Channel Code 173430

Luminaire for continuous channel installation (end caps not included), with light continuity even in the junction. 2MG parabolic louvre, high efficiency, in specular aluminium with superficial titanium-magnesium treatment, non-iridescent, with transverse blades closed at the top. Film protective against dust and finger marks, adhesive, attached to louvre. L<1000 cd/m² 65° E>75% Code

Item

Sources flux (lm)

Dimensions LxAxH

IFC Start/End Channel - Electronic MultiWatt EEI A2 - Lamps not included 173423 Barraluce P 1x28-54 T5 HF 2MG IFC 5P 31-58

2600-4450

1175x99x105

173430

3300-4300-6150

1475x99x105

Barraluce P 1x35-49-80 T5 HF 2MG IFC 5P

Absorbed power (W)

38-53-86

173437

Barraluce P 1+1x28-54 T5 HF 2MG IFC 5P

60-114

5200-8900

2346x99x105

173444

Barraluce P 1+1x35-49-80 T5 HF 2MG IFC 5P

76-106-170

6600-8600-12300

2946x99x105

IC Channel Intermediate - Electronic MultiWatt EEI A2 - Lamps not included 173589 Barraluce P 1+1x28-54 T5 HF 2MG IC 5P 60-114 5200-8900

2342x99x105

173590

2942x99x105

Barraluce P 1+1x35-49-80 T5 HF 2MG IC 5P

Datasheets, product updates and specifications on our website: www.3f-filippi.com

76-106-170

6600-8600-12300

121

Barraluce P Accessories Concealed sliding bracket in galvanized steel for free positioning, with locking screws. Code

Item

A01429

Sliding bracket for Barraluce P

Linear connecting elements in hotgalvanised steel with grub screws for fast and rigid installation.

Code

Item

A01423

Linear connecting elements Barraluce

Pair of end caps for channels, in grey painted aluminium, with screws for fixing to housing, always required. Thickness: 2 mm each cap.

Code

Item

A01434

Pair of end caps for Barraluce L channels with diffuser

Terminal block (plug/socket) with irreversible snap-in double clamp, for power-supply connection at beginning and end of the channel, 5 poles. Code

Item

A02484

5P socket/plug terminal block Beginning/End Channel

Suspensions for Barraluce P with regulator, galvanized steel cable of 2 mm diameter, load 25 kg.

122

Code

Item

A0693 New

Suspension with adjustment for Barraluce P - 1m

A0694 New

Suspension with adjustment for Barraluce P - 2 m

A0695 New

Suspension with adjustment for Barraluce P - 3 m

A0696 New

Suspension with adjustment for Barraluce P - 4 m

A0697 New

Suspension with adjustment for Barraluce P - 5 m

A0698 New

Suspension with adjustment for Barraluce P - 6 m

Surface luminaires and suspensions

News and updates available on: www.3f-filippi.com > Products > Recessed luminaires

Recessed Luminaires Product

Source

Lay-installation

Pull-up installation Sterile environments

126

Lucequadro

126

Lucequadro LED

LED

•

130

Lucequadro LED VDT

LED

•

134

Galassia

134

Galassia 220

LED

•

140

3F Dodeca

140

3F Dodeca 220

Fluo

•

144

3F Dodeca 220 AC

Fluo

•

148

3F Dodeca 300

Fluo

•

154

L 320

154

New L 320 LED

LED

•

with brackets

158

New L 320 LED Diffused light

LED

•

with brackets

160

New L 320 LED HCL

LED

•

with brackets

162

L 320 LED Sensor

LED

•

with brackets

164

New L 320 LED Wall Washer

LED

•

with brackets

166

L 320 Fluo

Fluo

•

with brackets

180

L 320 Fluo Decorative Border

Fluo

•

with brackets

184

L 350

184

L 350 LED

LED

•

with brackets

186

L 350 Fluo

Fluo

•

with brackets

190

L 350 Fluo R90

190

L 350 Fluo R90

Fluo

•

with brackets

192

L 390

192

New L 390 LED

194

L 390 LED HCL

198

L 400

198

L 400 Fluo

204

L 450

204

L 450 Fluo

LED

•

LED

•

Fluo

•

Fluo

•

Slat ceiling

Recessed luminaires

Page

208

L 560

208

L 560 LED

LED

•

210

L 560 Fluo

Fluo

•

216

L 580

216

L 580 LED IP54V

LED

•

218

L 580 Fluo IP54

Fluo

•

224

L 590

224

L 590 Fluo IP65

Fluo

•

228

Barraluce L

228

Barraluce L LED

LED

•

232

Barraluce L Opal Fluo

Fluo

•

234

Barraluce L 2MG Fluo

Fluo

•

125

Lucequadro LED Compact recessed LED luminaire for high energy efficiency systems and high visual comfort

Construction characteristics

Source characteristics

Applications

• Compact LED module, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3. • Zhaga Book 3 compliant.

Environments: commercial, exhibition areas, transit areas, halls, shops, great halls, display windows.

Mechanical characteristics Housing in white painted steel. Passive heat dissipator in anodised aluminium, oversized, for optimum thermal management of the LED module. Flow recuperator in specular aluminium with superficial titanium-magnesium treatment, non-iridescent. Lock-in mounting of the glass/PMMA in the lateral seats in specular aluminium. Fixing brackets in galvanised steel, supplied. Electrical characteristics Wiring on a separate unit. Electronic wiring 230V-50/60Hz. In compliance with EN 60598-1. EP maintained emergency wiring, 3hr duration with 24hrs recharge, fuse. In compliance with EN 60598-2-22.

On request • asymmetric louvre • LED module, CCT nominal color temperature 3000 K, color rendering index CRI >90 • wiring: dimmable • fluorescent version • IP54 version • ceiling version

Accessories Accessories on page 132.

Dimensions

A=L

126

Lucequadro LED Lucequadro LED VS Code 36578

Recessed luminaires

Average luminance <3000 cd/m² for radial angles >65°. VS moulded glass, anti-glare, tempered, non-combustible, thickness 4 mm. L<3000 cd/m² 65° E=100% Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 36575 Lucequadro LED 2000 VS

18.7

2027

235x235x116

36578

27.5

2668

235x235x116

EP emergency, fuse 36576 Lucequadro LED 2000 EP VS

18.7

2027

235x235x116

36579

27.5

2668

235x235x116

Lucequadro LED 3000 VS

Lucequadro LED 3000 EP VS

Lucequadro LED VOP Code 36584

Glazed VOP opal glass, tempered, non-combustible, thickness 4 mm.

E=100% Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 36581 Lucequadro LED 2000 VOP

18.7

1272

235x235x116

36584

27.5

1673

235x235x116

EP emergency, fuse 36582 Lucequadro LED 2000 EP VOP

18.7

1272

235x235x116

36585

27.5

1673

235x235x116

Lucequadro LED 3000 VOP

Lucequadro LED 3000 EP VOP

Datasheets, product updates and specifications on our website: www.3f-filippi.com

127

Lucequadro LED Lucequadro LED SOP Code 36590

SOP opal methacrylate flat diffuser, anti-glare.

E=100% Code

Item

Electronic 36587 New Lucequadro LED 2000 SOP 36590

New

Lucequadro LED 3000 SOP

EP emergency, fuse 36588 New Lucequadro LED 2000 EP SOP 36591

128

New

Lucequadro LED 3000 EP SOP

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

18.7

1980

235x235x116

27.5

2606

235x235x116

18.7

1980

235x235x116

27.5

2606

235x235x116

Recessed luminaires

Lucequadro LED VDT Compact recessed LED luminaire for high energy efficiency systems and high visual comfort

Construction characteristics

Source characteristics

Applications

• Compact LED module, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3. • Zhaga Book 3 compliant.

Environments: architectural, commercial, staterooms, with VDTs, banks, shops, offices, meeting rooms, auditoriums. Environments where demanding visual tasks are performed and comfortable lighting is required.

Mechanical characteristics Housing in white painted steel. Passive heat dissipator in anodised aluminium, oversized, for optimum thermal management of the LED module. 2MG parabolic louvre with blades and V-element closed at the top, in specular aluminium with superficial titaniummagnesium treatment, non-iridescent. Prismatic PMMA diffuser for total shielding of the louvre compartment. Film protective against dust and finger marks, adhesive, attached to louvre. Fixing brackets in galvanised steel, supplied. Electrical characteristics Wiring on a separate unit. Electronic wiring 230V-50/60Hz. In compliance with EN 60598-1.

On request • LED module, CCT nominal color temperature 3000 K, color rendering index CRI >90 • wiring: dimmable • fluorescent version • ceiling version

Accessories Accessories on page 132.

Dimensions

H 6 25 A=L

130

6 25

Lucequadro LED VDT Lucequadro LED VDT

Item

Electronic 36601 Lucequadro LED 4000 2MG VDT

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

34.4

3342

321x321x165

131

Recessed luminaires

Code 36601

Lucequadro Accessories Pair of reinforcing brackets for false ceilings in mineral fibre, metal and plasterboard, height 20 mm.

132

Code

Item

A0189

Reinforcing bracket Lucequadro for pan./plast.

Recessed luminaires

Galassia 220 Compact recessed LED luminaire for high energy efficiency systems

Construction characteristics

Source characteristics

Applications

• Compact LED module, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3. • Zhaga Book 3 compliant.

Environments: architectural, commercial, exhibition areas, transit areas, corridors, shops, display windows. In false ceilings with narrow voids.

Mechanical characteristics Housing and fixing brackets in galvanized steel. Passive heat dissipator in anodised aluminium, oversized, for optimum thermal management of the LED module. Parabolic louvre in polished anodised aluminium, anti-glare, non-iridescent. Electrical characteristics Wiring on a separate unit. Electronic wiring 230V-50/60Hz. In compliance with EN 60598-1. EP maintained emergency wiring, 1hr duration with 24hrs recharge, fuse. In compliance with EN 60598-2-22.

On request • asymmetric louvre • LED module, CCT nominal color temperature 3000 K, color rendering index CRI >90 • wiring: dimmable • ceiling version

Accessories Accessories on page 139.

Dimensions

H H

134

2000 -3000 lm

4000 lm

Galassia 220 Galassia 220

E=100% Code

Item

Electronic 37750 Galassia 220 LED 2000

Absorbed power (W)

Output flux (lm)

Dimensions ØxH

18.7

1977

221x103

37793

Galassia 220 LED 3000

27.5

2602

221x103

37830

Galassia 220 LED 4000

34.4

3429

221x151

EP emergency, fuse 37752 Galassia 220 LED 2000 EP

18.7

1977

221x103

37795

27.5

2602

221x103

Galassia 220 LED 3000 EP

Galassia 220 VT Code 37802

E=100%

Code

Item

2000 - Average luminance <1000 cd/m² for radial angles >65°. Parabolic louvre in polished anodised aluminium, anti-glare, non-iridescent. Circular anti-glare LED shielding lens in opal PMMA for good visual comfort. VT transparent glass, tempered, not flammable, locked and in line with the trim. It does not allow the access of the insects into the luminous compartment, avoiding unpleasant visual effects and extraordinary maintenance.

Absorbed power (W)

Output flux (lm)

Dimensions ØxH

Electronic 37759 Galassia 220 LED 2000 VT

18.7

1877

221x103

37802

Galassia 220 LED 3000 VT

27.5

2471

221x103

37834

Galassia 220 LED 4000 VT

34.4

3255

221x151

EP emergency, fuse 37761 Galassia 220 LED 2000 EP VT

18.7

1877

221x103

37804

27.5

2471

221x103

Galassia 220 LED 3000 EP VT

Datasheets, product updates and specifications on our website: www.3f-filippi.com

135

Recessed luminaires

Code 37793

Galassia 220 Galassia 220 VS Code 37820

E=100%

Code

Item

2000 - Average luminance <3000 cd/m² for radial angles >65°. Parabolic louvre in polished anodised aluminium, anti-glare, non-iridescent. Anti-glare microprismatic VS moulded glass, tempered, not flammable, locked and in line with the trim. It does not allow the access of the insects into the luminous compartment, avoiding unpleasant visual effects and extraordinary maintenance.

Absorbed power (W)

Output flux (lm)

Dimensions ØxH

Electronic 37777 Galassia 220 LED 2000 VS

18.7

2103

221x103

37820

Galassia 220 LED 3000 VS

27.5

2767

221x103

37838

Galassia 220 LED 4000 VS

34.4

3646

221x151

EP emergency, fuse 37779 Galassia 220 LED 2000 EP VS

18.7

2103

221x103

37822

27.5

2767

221x103

Galassia 220 LED 3000 EP VS

Galassia 220 VOP Code 37811

E=100%

Code

Item

Electronic 37768 Galassia 220 LED 2000 VOP

Parabolic louvre in polished anodised aluminium, anti-glare, non-iridescent. Glazed OP opal glass, tempered, non-combustible, locked in line with the trim. It does not allow the access of the insects into the luminous compartment, avoiding unpleasant visual effects and extraordinary maintenance. Absorbed power (W)

Output flux (lm)

Dimensions ØxH

18.7

1294

221x103

37811

Galassia 220 LED 3000 VOP

27.5

1703

221x103

37842

Galassia 220 LED 4000 VOP

34.4

2244

221x151

EP emergency, fuse 37770 Galassia 220 LED 2000 EP VOP

18.7

1294

221x103

37813

27.5

1703

221x103

136

Galassia 220 LED 3000 EP VOP

Galassia 220 Galassia 220 AB VS

E=100%

Code

Item

2000 - Average luminance <3000 cd/m² for radial angles >65°. AB trim in white moulded Bayblend. Parabolic louvre in polished anodised aluminium, anti-glare, non-iridescent. Anti-glare microprismatic VS moulded glass, tempered, not flammable, locked and in line with the trim. It does not allow the access of the insects into the luminous compartment, avoiding unpleasant visual effects and extraordinary maintenance.

Absorbed power (W)

Output flux (lm)

Dimensions ØxH

Electronic 37551 Galassia 220 LED AB 2000 VS

18.7

2103

226x103

37587

Galassia 220 LED AB 3000 VS

27.5

2767

226x103

37604

Galassia 220 LED AB 4000 VS

34.4

3646

226x151

EP emergency, fuse 37553 Galassia 220 LED AB 2000 EP VS

18.7

2103

226x103

37589

27.5

2767

226x103

Galassia 220 LED AB 3000 EP VS

Datasheets, product updates and specifications on our website: www.3f-filippi.com

137

Recessed luminaires

Code 37587

Galassia 220 Galassia 220 AB VOP Code 37578

E=100%

Code

Item

Electronic 37542 Galassia 220 LED AB 2000 VOP

AB trim in white moulded Bayblend. Parabolic louvre in polished anodised aluminium, anti-glare, non-iridescent. Glazed OP opal glass, tempered, non-combustible, locked in line with the trim. It does not allow the access of the insects into the luminous compartment, avoiding unpleasant visual effects and extraordinary maintenance. Absorbed power (W)

Output flux (lm)

Dimensions ØxH

18.7

1294

226x103

37578

Galassia 220 LED AB 3000 VOP

27.5

1703

226x103

37608

Galassia 220 LED AB 4000 VOP

34.4

2244

226x151

EP emergency, fuse 37544 Galassia 220 LED AB 2000 EP VOP

18.7

1294

226x103

37580

27.5

1703

226x103

138

Galassia 220 LED AB 3000 EP VOP

Galassia Accessories

Code

Item

A0202

False ceiling bracket - for luminaire D.220

Recessed luminaires

Reinforcing bracket for panels 600x600, 600x1200 with exposed structure, in hot-galvanised steel.

Reinforcing bracket for metal panels 600x600 with concealed structure, in hot-galvanized steel.

Code

Item

A0214

Metal pan. reinforcing bracket (3F Dodeca 220)

Anti-rotation adapter for grilled ceiling with closing mats (always suggested to avoid stray light). Adapter made in steel - white color, RAL 9010.

Code

Item

A0204

Grid bracket h40mm - for luminaire D.220

A01523

Grid bracket h50mm - for luminaire D.220

Bracket size 289x289 mm for 50x50, 75x75, 100x100 mesh, slat 10 mm thick.

Datasheets, product updates and specifications on our website: www.3f-filippi.com

139

3F Dodeca 220 Circular recessed luminaire

Construction characteristics

Source characteristics

Accessories

Illuminotechnical characteristics Direct symmetric distribution.

• Fluorescent compact lamps, CCT nominal color temperature 4000 K, color rendering index CRI >80. • 42W amalgam lamps.

Accessories on page 152.

On request

Use of diffusers or glass covers provides IP44 protection for the exposed part and allows application in rooms with protection requirements such as laboratories or service areas. 2MG, 2S versions Environments: with VDTs, auditoriums, meeting rooms. Environments where soft diffuse light is required for optimal visual comfort. 2MG VS version Environments: commercial, exhibition areas, shops, display windows. Version specifically suitable for canteens, hospitals and environments with foodstuffs (thanks to anti-insects protection).

Mechanical characteristics Polycarbonate housing (for versions with absorbed power up to 40W). Galvanized steel housing (for versions with absorbed power over 40W). Fixing brackets in galvanised steel. Trim in light grey polycarbonate. Dodecagonal louvre made up with aluminium segments on a polycarbonate support. Electrical characteristics Wiring on a separate unit. EEI A2 electronic wiring, 230V-50/60Hz, lamp warm start. EP maintained emergency wiring on one single lamp, 1hr duration with 24hrs recharge, fuse. In compliance with EN 60598-2-22.

• asymmetric lighting distribution for the single-lamp version • lamps in different powers or colour temperatures • MultiWatt ballast in case of change of use of the room • central crossshaped louvre for complete shielding of the lamp • opal glass and PMMA • fuse accessory (on page 472) • wiring: dimmable, twin-circuit, class II, emergency with different characteristics, ENP emergency and/or night light • emergency inhibition

Applications

Dimensions

140

3F Dodeca 220 3F Dodeca 220 2MG

Average luminance <200 cd/m² for radial angles >65°. 2MG dodecagonal optic composed of aluminum foil mirror, high efficiency, with titanium magnesium surface treatment, noniridescent, mounted on a polycarbonate support.

L<200 cd/m² 65° E>64% Code

Item

EEI A2 electronic wiring - Lamps supplied 3897 3F Dodeca 220 1x18 CD HF 2MG

Absorbed power (W)

Sources flux (lm)

Dimensions ØxH

1200

222x158

3898

3F Dodeca 220 1x26 CD HF 2MG

1800

222x158

3900

3F Dodeca 220 2x18 CD HF 2MG

2400

222x158

3905

3F Dodeca 220 1x42 CT HF 2MG

3200

222x158

3901

3F Dodeca 220 2x26 CD HF 2MG

3600

222x158

EP emergency, fuse - Lamps supplied 3907 3F Dodeca 220 1x18 CD HF EP 2MG

1200

222x158

3908

1800

222x158

3F Dodeca 220 1x26 CD HF EP 2MG

3910

3F Dodeca 220 2x18 CD HF EP 2MG

2400

222x158

3915

3F Dodeca 220 1x42 CT HF EP 2MG

3200

222x158

3911

3F Dodeca 220 2x26 CD HF EP 2MG

3600

222x158

Datasheets, product updates and specifications on our website: www.3f-filippi.com

141

Recessed luminaires

Code 3901

3F Dodeca 220 3F Dodeca 220 2S Code 3945

Average luminance <200 cd/m² for radial angles >65°. 2S dodecagonal optic made of aluminum foil half-mirror, antiglare, mounted on a polycarbonate support.

L<200 cd/m² 65° E>59% Code

Item

EEI A2 electronic wiring - Lamps supplied 3938 3F Dodeca 220 1x18 CD HF 2S

Absorbed power (W)

Sources flux (lm)

Dimensions ØxH

1200

222x158

3940

3F Dodeca 220 1x26 CD HF 2S

1800

222x158

3944

3F Dodeca 220 2x18 CD HF 2S

2400

222x158

3942

3F Dodeca 220 1x42 CT HF 2S

3200

222x158

3945

3F Dodeca 220 2x26 CD HF 2S

3600

222x158

EP emergency, fuse - Lamps supplied 3948 3F Dodeca 220 1x18 CD HF EP 2S

1200

222x158

3950

1800

222x158

3F Dodeca 220 1x26 CD HF EP 2S

3954

3F Dodeca 220 2x18 CD HF EP 2S

2400

222x158

3952

3F Dodeca 220 1x42 CT HF EP 2S

3200

222x158

3955

3F Dodeca 220 2x26 CD HF EP 2S

3600

222x158

3F Dodeca 220 2MG VS Code 3768

2MG dodecagonal optic composed of aluminum foil mirror, high efficiency, with titanium magnesium surface treatment, noniridescent, mounted on a polycarbonate support. Anti-glare microprismatic VS moulded glass, tempered, not flammable, locked and in line with the trim.

E>63% Code

Absorbed power (W)

Sources flux (lm)

Dimensions ØxH

EEI A2 electronic wiring - Lamps supplied 3768 3F Dodeca 220 1x42 CT HF 2MG VS

3200

222x158

EP emergency, fuse - Lamps supplied 3770 3F Dodeca 220 1x42 CT HF EP 2MG VS

3200

226x158

142

Item

Recessed luminaires

3F Dodeca 220 AC Low-height circular recessed luminaire

Construction characteristics

Source characteristics

Accessories

Illuminotechnical characteristics Diffused symmetric distribution.

• Fluorescent compact lamps, CCT nominal color temperature 4000 K, color rendering index CRI >80.

Accessories on page 152.

Mechanical characteristics Housing in galvanised steel. Fixing brackets in galvanised steel. Trim in light grey polycarbonate. Electrical characteristics Wiring on a separate unit. EEI A2 electronic wiring, 230V-50/60Hz, lamp warm start. EP maintained emergency wiring on one single lamp, 1hr duration with 24hrs recharge, fuse. In compliance with EN 60598-2-22.

On request • parabolic louvre 2S • asymmetric lighting distribution for the single-lamp version • lamps in different powers or colour temperatures • MultiWatt ballast in case of change of use of the room • opal glass and PMMA • fuse accessory (on page 472) • wiring: dimmable, twin-circuit, class II, emergency with different characteristics, ENP emergency and/or night light • emergency inhibition

Applications In false ceilings with narrow voids. Environments: commercial, exhibition areas, shops, display windows. Use of diffusers or glass covers provides IP44 protection for the exposed part and allows application in rooms with protection requirements such as laboratories or service areas. 2MG VDT version Environments with VDTs. Environments where demanding visual tasks are performed and comfortable lighting is required. 2MG VS version Version specifically suitable for canteens, hospitals and environments with foodstuffs (thanks to anti-insects protection).

Dimensions

144

3F Dodeca 220 AC 3F Dodeca 220 AC 2MG

2MG dodecagonal optic composed of aluminum foil mirror, high efficiency, with titanium magnesium surface treatment, noniridescent, mounted on a polycarbonate support.

E>63% Code

Item

EEI A2 electronic wiring - Lamps supplied 3084 3F Dodeca 220 AC 1x18 CD HF 2MG

Absorbed power (W)

Sources flux (lm)

Dimensions ØxH

1200

222x100

3085

3F Dodeca 220 AC 1x26 CD HF 2MG

1800

222x100

3087

3F Dodeca 220 AC 2x18 CD HF 2MG

2400

222x100

3088

3F Dodeca 220 AC 2x26 CD HF 2MG

3600

222x100

1200

222x100

EP emergency, fuse - Lamps supplied 3094 3F Dodeca 220 AC 1x18 CD HF EP 2MG 3095

3F Dodeca 220 AC 1x26 CD HF EP 2MG

1800

222x100

3097

3F Dodeca 220 AC 2x18 CD HF EP 2MG

2400

222x100

3098

3F Dodeca 220 AC 2x26 CD HF EP 2MG

3600

222x100

3F Dodeca 220 AC 2MG VDT Code 36205

Average luminance <1000 cd/m² for radial angles >65°. 2MG VDT dodecagonal optic with high shielding and central cross and aluminum foil mirror, high efficiency, with titanium magnesium surface treatment, non-iridescent, mounted on a polycarbonate support.

L<1000 cd/m² 65 E>51% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions ØxH

EEI A2 electronic wiring - Lamps supplied 36202 3F Dodeca 220 AC 1x26 CD HF 2MG VDT

1800

222x100

36205

3600

222x100

EP emergency, fuse - Lamps supplied 36231 3F Dodeca 220 AC 1x26 CD HF EP 2MG VDT

1800

222x100

36234

3600

222x100

3F Dodeca 220 AC 2x26 CD HF 2MG VDT

3F Dodeca 220 AC 2x26 CD HF EP 2MG VDT

Datasheets, product updates and specifications on our website: www.3f-filippi.com

145

Recessed luminaires

Code 3088

3F Dodeca 220 AC 3F Dodeca 220 AC 2MG VS Code 3177

2MG dodecagonal optic composed of aluminum foil mirror, with titanium magnesium surface treatment, non-iridescent, mounted on a polycarbonate support. Anti-glare microprismatic VS moulded glass, tempered, not flammable, locked and in line with the trim.

E>33% Code

Item

EEI A2 electronic wiring - Lamps supplied 3174 3F Dodeca 220 AC 1x26 CD HF 2MG VS

Absorbed power (W)

Sources flux (lm)

Dimensions ØxH

1800

226x100

3176

3F Dodeca 220 AC 2x18 CD HF 2MG VS

2400

226x100

3177

3F Dodeca 220 AC 2x26 CD HF 2MG VS

3600

226x100

EP emergency, fuse - Lamps supplied 3181 3F Dodeca 220 AC 1x26 CD HF EP 2MG VS

1800

226x100

3183

3F Dodeca 220 AC 2x18 CD HF EP 2MG VS

2400

226x100

3184

3F Dodeca 220 AC 2x26 CD HF EP 2MG VS

3600

226x100

146

Recessed luminaires

3F Dodeca 300 Circular recessed luminaire

Construction characteristics

On request

Applications

Illuminotechnical characteristics Symmetric lighting distribution, asymmetric lighting distribution can be achieved in the single-lamp version by dislocating the lamp.

• asymmetric lighting distribution • lamps in different powers or colour temperatures • MultiWatt ballast in case of change of use of the room • opal glass • fuse accessory (on page 472) • wiring: dimmable, twin-circuit, class II, emergency with different characteristics, ENP emergency and/or night light • three-lamp wiring fitted (e.g. 2x32 CT+1x26 CT) • emergency inhibition • ceiling version

The use of glass covers provides IP44 protection degree in the exposed part and allows application in rooms with protection requirements such as laboratories or service areas. 2MG, 2S single-lamp versions Environments: architectural, staterooms, with VDTs, auditoriums, meeting rooms, offices. Environments with exacting visual tasks, where diffused soft light for optimum visual comfort is required. 2MG, 2S twin-lamp versions Environments: commercial, exhibition areas. Environments where high levels of light are required. 2MG SK version Environments with VDTs. Environments where demanding visual tasks are performed and soft diffuse light is required for optimal visual comfort and total shielding of the light source. 2MG VS version Version specifically suitable for canteens, hospitals and environments with foodstuffs (thanks to anti-insects protection).

Mechanical characteristics Housing in galvanised steel. Fixing brackets in galvanised steel. Trim in light grey polycarbonate. Dodecagonal louvre made up with aluminium segments on a polycarbonate support. IP23-44 protection degree for the exposed part. Electrical characteristics Wiring on a separate unit. EEI A2 electronic wiring, 230V-50/60Hz, lamp warm start. EP maintained emergency wiring on one single lamp, 1hr duration with 24hrs recharge, fuse. In compliance with EN 60598-2-22.

Source characteristics

Accessories Accessories on page 152.

Dimensions

• Fluorescent compact lamps, CCT nominal color temperature 4000 K, color rendering index CRI >80. • 32-42W amalgam lamps. H

148

3F Dodeca 300 3F Dodeca 300 2MG

Average luminance <200 cd/m² for radial angles >60°. 2MG dodecagonal optic composed of aluminum foil mirror, high efficiency, with titanium magnesium surface treatment, noniridescent, mounted on a polycarbonate support.

L<200 cd/m² 60° E>85% Code

Item

EEI A2 electronic wiring - Lamps supplied 3561 3F Dodeca 300 1x26 CD HF 2MG

Absorbed power (W)

Sources flux (lm)

Dimensions ØxH

1800

303x188

3562

3F Dodeca 300 1x32 CT HF 2MG

2400

303x188

3563

3F Dodeca 300 1x42 CT HF 2MG

3200

303x188

3566

3F Dodeca 300 2x26 CD HF 2MG

3600

303x188

3567

3F Dodeca 300 2x32 CT HF 2MG

4800

303x188

3568

3F Dodeca 300 2x42 CT HF 2MG

6400

303x188

1800

303x188

EP emergency, fuse - Lamps supplied 3570 3F Dodeca 300 1x26 CD HF EP 2MG 3571

3F Dodeca 300 1x32 CT HF EP 2MG

2400

303x188

3572

3F Dodeca 300 1x42 CT HF EP 2MG

3200

303x188

3575

3F Dodeca 300 2x26 CD HF EP 2MG

3600

303x188

3576

3F Dodeca 300 2x32 CT HF EP 2MG

4800

303x188

3577

3F Dodeca 300 2x42 CT HF EP 2MG

6400

303x188

Datasheets, product updates and specifications on our website: www.3f-filippi.com

149

Recessed luminaires

Code 3563

3F Dodeca 300 3F Dodeca 300 2S Code 3608

Average luminance <200 cd/m² for radial angles >65°. 2S dodecagonal optic made of aluminum foil half-mirror, antiglare, mounted on a polycarbonate support.

L<200 cd/m² 65° E>75% Code

Item

EEI A2 electronic wiring - Lamps supplied 3606 3F Dodeca 300 1x26 CD HF 2S

Absorbed power (W)

Sources flux (lm)

Dimensions ØxH

1800

303x188

3607

3F Dodeca 300 1x32 CT HF 2S

2400

303x188

3608

3F Dodeca 300 1x42 CT HF 2S

3200

303x188

3611

3F Dodeca 300 2x26 CD HF 2S

3600

303x188

3612

3F Dodeca 300 2x32 CT HF 2S

4800

303x188

3613

3F Dodeca 300 2x42 CT HF 2S

6400

303x188

1800

303x188

EP emergency, fuse - Lamps supplied 3615 3F Dodeca 300 1x26 CD HF EP 2S 3616

3F Dodeca 300 1x32 CT HF EP 2S

2400

303x188

3617

3F Dodeca 300 1x42 CT HF EP 2S

3200

303x188

3620

3F Dodeca 300 2x26 CD HF EP 2S

3600

303x188

3621

3F Dodeca 300 2x32 CT HF EP 2S

4800

303x188

3622

3F Dodeca 300 2x42 CT HF EP 2S

6400

303x188

150

3F Dodeca 300 3F Dodeca 300 2MG SK Code 36381

Recessed luminaires

Average luminance <200 cd/m² for radial angles >65°. 2MG SK dodecagonal optic with high shielding and central cross and aluminum foil mirror, high efficiency, with titanium magnesium surface treatment, non-iridescent, mounted on a polycarbonate support.

L<200 cd/m² 60° E>71% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions ØxH

EEI A2 electronic wiring - Lamps supplied 36381 3F Dodeca 300 2x32 CT HF 2MG SK

4800

303x188

36382

6400

303x188

EP emergency, fuse - Lamps supplied 36423 3F Dodeca 300 2x32 CT HF EP 2MG SK

4800

303x188

36424

6400

303x188

3F Dodeca 300 2x42 CT HF 2MG SK

3F Dodeca 300 2x42 CT HF EP 2MG SK

3F Dodeca 300 2MG VS Code 3656

E>77% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions ØxH

EEI A2 electronic wiring - Lamps supplied 3656 3F Dodeca 300 1x42 CT HF 2MG VS

3200

303x188

EP emergency, fuse - Lamps supplied 3658 3F Dodeca 300 1x42 CT HF EP 2MG VS

3200

303x188

Datasheets, product updates and specifications on our website: www.3f-filippi.com

151

3F Dodeca Accessories Transparent tempered glass, attached with springs on the trim, thickness 4 mm, steel springs for lock-in mounting on the trim. Recessed versions, IP44 exposed part.

Code

Item

A0195

Transparent glass (3F Dodeca 220, 220 AC)

A0197

Transparent glass (3F Dodeca 300)

A0195 Only 1-2x18W versions, 1x26, 1x42 for an optimal operating temperature. A0197 Only for versions 1x26, 1x32, 1x42, for optimal operating temperature. Not be installed on SK version and offices with monitors.

Decorative moulded tempered glass, attached with springs on the trim, thickness 4 mm, steel springs for lock-in mounting on the trim. Recessed versions, IP44 exposed part. Code

Item

A0196

Moulded glass (3F Dodeca 220, 220 AC)

A0198

Moulded glass (3F Dodeca 300)

A0196 Only 1-2x18W versions, 1x26, 1x42 for an optimal operating temperature. A0198 Only for versions 1x26, 1x32, 1x42, for optimal operating temperature. Not be installed on SK version and offices with monitors.

Closing diffuser for environments where a good protection degree is required, or tamper-proof luminaires are necessary, in transparent self-extinguishing V2 polycarbonate, UV stabilised, prismatic. Quick lock-in mounting, inside the louvre, 3F Dodeca AC excluded. Recessed versions, IP44 exposed part.

Code

Item

A0194

Diffuser IP44 (3F Dodeca 220)

Reinforcing bracket for panels 600x600, 600x1200 with exposed structure, in hot-galvanised steel.

152

Code

Item

A0202

False ceiling bracket - for luminaire D.220

A0203

False ceiling bracket- for luminaire D.300

3F Dodeca Accessories

Code

Item

A0204

Grid bracket h40mm - for luminaire D.220

A0205

Grid bracket h40mm - for luminaire D.300

A01523

Grid bracket h50mm - for luminaire D.220

A01524

Grid bracket h50mm - for luminaire D.300

Recessed luminaires

Anti-rotation adapter for grilled ceiling with closing mats (always suggested to avoid stray light). Adapter made in steel - white color, RAL 9010.

3F Dodeca 220 - 3F Dodeca 220 AC: bracket size 289x289 mm for 50x50, 75x75, 100x100 mesh, slat 10 mm thick. 3F Dodeca 300: bracket size 389x389 mm for 50x50, 100x100 mesh, slat 10 mm thick. On request: RAL colour, bracket for grid with h=50 mm; bracket for 75x75 mesh with h=40 mm for 3F Dodeca 300.

Reinforcing bracket for metal panels 600x600 with concealed structure, in hot-galvanized steel.

Code

Item

A0214

Metal pan. reinforcing bracket (3F Dodeca 220)

A0215

Metal pan. reinforcing bracket (3F Dodeca 300)

Datasheets, product updates and specifications on our website: www.3f-filippi.com

153

New

L 320 LED LED luminaire for high energy efficiency systems

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics Lifetime (L90/B10): 30000 h. (Tp 60°C) Lifetime (L85/B10): 50000 h. (Tp 60°C) Lifetime (L75/B10): 80000 h. (Tp 60°C) Photobiological safety RG0 unlimited, risk absent, in compliance with IEC 62471, IEC/TR 62778.

• Linear LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 2.

Environments: staterooms, with VDTs, offices. Environments where demanding visual tasks are performed and soft diffuse light is required for optimal visual comfort and total shielding of the light source.

Mechanical characteristics Housing in hot-galvanised steel painted in white polyester.

• diffuser in OP opal PMMA or SP polycarbonate, self-extinguishing V2 • luminaires for pull-up installation with brackets • different powers or colour temperatures

Electrical characteristics Electronic wiring 230V-50/60Hz. DALI electronic wiring 230V-50/60Hz. In compliance with EN 60598-1. EP mantained emergency wiring on one single LED module, 1hr duration with 24hrs recharge, fuse. In compliance with EN 60598-2-22.

On request

Accessories Accessories on page 182.

Light Management For more information on CLO technology, refer to the specific chapter in the “Light Management” section. The DALI products of this family can be controlled manually with the technology “3F Easy” or even automatically and manually using the “3F Smart Dimming” technology (see “Light Management” chapter).

Dimensions

6H A

154

12.5

6 L

12.5

L 320 LED L 320 LED 2MG

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 28844 New L 323x10W LED 2MG 596x596

4046

596x596x80

DALI electronic 28856 New L 323x10W LED DALI 2MG 596x596

4046

596x596x80

EP emergency, fuse 28847 New L 323x10W LED EP 2MG 596x596

4046

596x596x80

L 320 LED 2S Code 28826

Average luminance <1000 cd/m² for radial angles >65°. 2S parabolic louvre in semi-specular aluminium, non-reflecting, with transverse blades closed at the top. Prismatic PMMA diffuser for total shielding of the louvre compartment. Film protective against dust and finger marks, adhesive, attached to louvre. L<1000 cd/m² 65° E=100% Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 28826 L 323x10W LED 2S 596x596

3774

596x596x80

DALI electronic 28838 L 323x10W LED DALI 2S 596x596

3774

596x596x80

EP emergency, fuse 28829 L 323x10W LED EP 2S 596x596

3774

596x596x80

Datasheets, product updates and specifications on our website: www.3f-filippi.com

155

Recessed luminaires

Code 28844

L 320 LED L 320 LED SP Code 21244

Average luminance <3000 cd/m² for radial angles >65°. SP transparent PMMA diffuser, prismatic exterior, anti-glare, locked to the prepainted white aluminium perimeter frame with sealing gasket, hinged opening. L<3000 cd/m² 65° E=100% Code

Item

Electronic 21244 L 323x10W LED SP 596x596 21287

New

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

3935

596x596x80

L 322x18W LED SP 296x1196

4954

1196x296x95

L 324x10W LED SP 596x596

5207

596x596x80

DALI electronic 21256 L 323x10W LED DALI SP 596x596

3935

596x596x80

21290 New

L 322x18W LED DALI SP 296x1196

4954

1196x296x95

21257

L 324x10W LED DALI SP 596x596

5207

596x596x80

3935

596x596x80

21245

EP emergency, fuse 21262 L 323x10W LED EP SP 596x596 21293 21263

156

New

L 322x18W LED EP SP 296x1196

4954

1196x296x95

L 324x10W LED EP SP 596x596

5207

596x596x80

L 320 LED L 320 LED LGS Code 21580

L<1500 cd/m² 65° E=100%

Code

2x - 4x - Average luminance <3000 cd/m² for radial angles >65°. 3x - Average luminance <1500 cd/m² for radial angles >65°. LGS micro-prismatic flat diffuser in transparent methacrylate, multilenticular exterior, anti-glare, locked to the white painted aluminium perimetral frame, sealing gasket, hinged opening. Anti-glare opal polycarbonate filter for brightness uniformity.

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 21580 New L 323x10W LED LGS 596x596

2997

596x596x80

21600 New

L 322x18W LED LGS 296x1196

3851

1196x296x95

L 324x10W LED LGS 596x596

4047

596x596x80

2997

596x596x80

L 322x18W LED DALI LGS 296x1196

3851

1196x296x95

L 324x10W LED DALI LGS 596x596

4047

596x596x80

EP emergency, fuse 21589 New L 323x10W LED EP LGS 596x596

2997

596x596x80

21606 New

L 322x18W LED EP LGS 296x1196

3851

1196x296x95

L 324x10W LED EP LGS 596x596

4047

596x596x80

21581

Item

New

DALI electronic 21586 New L 323x10W LED DALI LGS 596x596 21603

New

21587 New

21590

New

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Recessed luminaires

157

New

L 320 LED Diffused light LED luminaire for high energy efficiency systems

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics Lifetime (L90/B10): 30000 h. (Tp 65°C) Lifetime (L85/B10): 50000 h. (Tp 65°C) Lifetime (L75/B10): 80000 h. (Tp 60°C) Photobiological safety RG0, risk absent, in compliance with IEC 62471.

• Squared LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3.

Environments where demanding visual tasks are performed and soft diffuse light is required for optimal visual comfort and total shielding of the light source. LGS version Environments: staterooms, with VDTs, offices.

Mechanical characteristics Housing in hot-galvanised steel, painted in white polyester. IP54 protection degree for exposed part, IP20 for recessed part. Electrical characteristics Electronic wiring 230V-50/60Hz. DALI electronic wiring 230V-50/60Hz. Quick connection. In compliance with EN 60598-1.

On request • different powers or colour temperatures • diffuser in SP prismatic PMMA or SP polycarbonate, Selfextinguishing V2 • wiring: emergency • luminaires for pull-up installation with brackets

Accessories Accessories on page 182.

Dimensions

6H A

158

12.5

6 L

12.5

L 320 LED Diffused light L 320 LED Diffused Light Opal

OP opal PMMA flat diffuser, anti-glare, locked to the pre-painted white aluminium perimeter frame with sealing gasket, hinged opening.

E=100% Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 21408 L 320 32W LED OP 596x596

3328

596x596x80

DALI electronic 21410 L 320 32W LED DALI OP 596x596

3328

596x596x80

L 320 LED Diffused light LGS Code 21422

Average luminance <1500 cd/m² for radial angles >65°. LGS micro-prismatic flat diffuser in transparent methacrylate, multilenticular exterior, anti-glare, locked to the white painted aluminium perimetral frame, sealing gasket, hinged opening. Anti-glare opal polycarbonate filter for brightness uniformity.

L<1500 cd/m² 65° E=100% Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 21422 New L 320 32W LED LGS 596x596

2908

596x596x80

DALI electronic 21424 New L 320 32W LED DALI LGS 596x596

2908

596x596x80

Datasheets, product updates and specifications on our website: www.3f-filippi.com

159

Recessed luminaires

Code 21408

New

L 320 LED HCL Wellbeing LED fixture

Construction characteristics

Source characteristics

Applications

• Linear LED modules, CCT nominal color temperature from 2700 K to 6500 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3.

Mechanical characteristics Housing in hot-galvanised steel, painted in white polyester. Micro-prismatic flat diffuser in transparent PMMA, multilenticular exterior, anti-glare, locked to the white painted aluminium perimetral frame, sealing gasket, hinged opening. Anti-glare opal polycarbonate filter for brightness uniformity.

• diffuser in SP prismatic PMMA or SP polycarbonate, Selfextinguishing V2 • luminaires for pull-up installation with brackets

On request

Light Management In this product the light intensity and color temperature can be controlled automatically or manually, with the “Controller HCL” (see “Light Management” chapter).

Accessories Accessories on page 182.

Electrical characteristics DALI electronic wiring 230V-50/60Hz. In compliance with EN 60598-1.

Dimensions

6H A

160

12.5

6 L

12.5

L 320 LED HCL L 320 LED HCL LGS Code 21613

L<1500 cd/m² 65° E=100%

Code

Item

DALI electronic 21615 New L 323x10W LED DALI HCL LGS 596x596

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Recessed luminaires

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

2919

596x596x80

161

L 320 LED Sensor LED luminaire for high energy efficiency systems

Construction characteristics

Source characteristics

Applications

• Linear LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 2.

Mechanical characteristics Housing in hot-galvanised steel painted in white polyester. IP54 protection degree for exposed part, IP20 for recessed part.

• diffuser in OP opal PMMA or SP polycarbonate, self-extinguishing V2 • different powers or colour temperatures • wiring: EP emergency • luminaires for pull-up installation with brackets

Electrical characteristics Electronic wiring 230V-50/60Hz. In compliance with EN 60598-1. On board DALI light sensor (no cables to be added). CF Corridor function: even with the environment free of people, the luminous flux is maintained at 10%.

On request

Light Management For more information on 3F Sensor technology, refer to the specific chapter in the “Light Management” section.

Accessories Accessories on page 182.

Dimensions

6H A

162

12.5

6 L

12.5

L 320 LED Sensor L 320 LED Sensor LGS Code 21598

L<1500 cd/m² 65° E=100%

Code

Item

Electronic 21598 New L 323x10W LED Sensor CF LGS 596x596

Recessed luminaires

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

2997

596x596x80

L 320 LED Sensor SP Code 21282

Item

Electronic 21282 L 323x10W LED Sensor CF SP 596x596

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

3935

596x59x80

163

New

L 320 LED Wall Washer Recessed luminaire with Wall Washer light distribution

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics Direct Wall Washer distribution. Lifetime (L90/B10): 30000 h. (Tp 60°C) Lifetime (L85/B10): 50000 h. (Tp 60°C) Lifetime (L75/B10): 80000 h. (Tp 60°C) Photobiological safety RG0 unlimited, risk absent, in compliance with IEC 62471, IEC/TR 62778.

• Linear LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 2.

Environments where uniform vertical illumination of walls, panels, blackboards, shelves and display units is required.

Mechanical characteristics Housing in white painted steel. Black painted heads inside louvre compartment. Wall Washer parabolic flux recuperator in semi-specular aluminium.

Light Management

On request • different powers or colour temperatures • wiring: dimmable, emergency

For more information on CLO technology, refer to the specific chapter in the “Light Management” section. The DALI products of this family can be controlled manually with the technology “3F Easy” or even automatically and manually using the “3F Smart Dimming” technology (see “Light Management” chapter).

Electrical characteristics Electronic wiring 230V-50/60Hz. In compliance with EN 60598-1.

Dimensions

H 6

50 A

164

12.5 L

L 320 LED Wall Washer L 320 LED WW

Recessed luminaires

Code 21393

Wall Washer parabolic flux recuperator in semi-specular aluminium.

E>100% Code

Item

Electronic 21393 New L 322x24W LED WW 296x1196

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

5418

1196x296x110

165

L 320 Fluo Luminaire suitable for lay-installation on false ceilings

Construction characteristics

Source characteristics

Accessories

Mechanical characteristics Housing in hot-galvanized steel and painted in white polyester, for square version. Housing in white painted steel for rectangular or SP IP54 versions.

• In LD versions, T5 and T8 lamps pre-mounted. • Fluorescent lamps, CCT nominal color temperature 4000 K, color rendering index CRI >80.

Accessories on page 182.

Applications 2M, 2MG, 2US, 2S versions Environments: educational, staterooms, with VDTs, schools, offices. 3AO version Environments: architectural, commercial, exhibition areas, transit areas, lobbies or waiting rooms, shops, schools. SPA, SP, VS versions Environments requiring a high level of protection, lamp shielding and simplified cleaning.

On request

Electrical characteristics EEI A2 electronic wiring, 230V-50/60Hz, lamp warm start. Versions with twin-circuit (DA) available. EP maintained emergency wiring on one single lamp, 1hr duration with 24hrs recharge, fuse. In compliance with EN 60598-2-22.

• MultiWatt electronic ballasts for T5 twin-lamp wirings • SPO opal PMMA diffuser or SP self-extinguishing V2 polycarbonate diffuser • luminaires with VSS laminated glass, IP65 exposed part • SP luminaires with interior prismatic diffuser • luminaires for pull-up installation with brackets • fuse accessory (on page 472) • wiring: dimmable, twin-circuit, emergency, emergency inhibition

Dimensions 3-4 x

6 H A=L 1x

2-3-4x

T8 6 H

6 H A

6 12.5

6 H

166

6 12.5

12.5

6 H L

12.5

L 320 Fluo L 320 T5 2M Code 2860

Recessed luminaires

L<200 cd/m² 65° E>74% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

Four-lamp ballast - EEI A2 electronic wiring - Pre-mounted lamps 2860 L 324x14 T5 LD HF 2M 62

4800

596x596x80

Three-lamp ballast - EEI A2 electronic wiring - Pre-mounted lamps 2861 L 323x14 T5 LD HF 2M 48

3600

596x596x80

Twin-circuit, twin-lamp ballast, lamps 1-4 and 2-3. - EEI A2 electronic wiring - Pre-mounted lamps 2864 L 324x14 T5 LD HF DA 2M 62 4800 596x596x80 EP emergency, fuse - Pre-mounted lamps 2863 L 323x14 T5 LD HF EP 2M

3600

596x596x80

2862

L 324x14 T5 LD HF EP 2M

4800

596x596x80

2865

L 324x14 T5 LD HF DA EP 2M

4800

596x596x80

Datasheets, product updates and specifications on our website: www.3f-filippi.com

167

L 320 Fluo L 320 T8 2M Code 2870

L<200 cd/m² 65° E>66% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

Four-lamp ballast - EEI A2 electronic wiring - Pre-mounted lamps 2870 L 324x18 LD HF 2M 74

5400

596x596x80

Three-lamp ballast - EEI A2 electronic wiring - Pre-mounted lamps 2002 L 323x18 LD HF 2M 55

4050

596x596x80

Twin-circuit, twin-lamp ballast, lamps 1-4 and 2-3. - EEI A2 electronic wiring - Pre-mounted lamps 2003 L 324x18 LD HF DA 2M 74 5400 596x596x80 EP emergency, fuse - Pre-mounted lamps 2871 L 324x18 LD HF EP 2M

5400

596x596x80

EEI A2 electronic wiring - Lamps not included 21114 L 321x18 HF 2M

1350

596x196x95

21115

2700

596x296x95

L 322x18 HF 2M

21116

L 321x36 HF 2M

3350

1196x196x95

21117

L 322x36 HF 2M

6700

1196x296x95

21118

L 323x36 HF 2M

107

10050

1196x596x95

21119

L 324x36 HF 2M

142

13400

1196x596x95

168

L 320 Fluo L 320 T5 2MG

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

Four-lamp ballast - EEI A2 electronic wiring - Pre-mounted lamps 2914 L 324x14 T5 LD HF 2MG 62

4800

596x596x80

Three-lamp ballast - EEI A2 electronic wiring - Pre-mounted lamps 2915 L 323x14 T5 LD HF 2MG 48

3600

596x596x80

Twin-circuit, twin-lamp ballast, lamps 1-4 and 2-3. - EEI A2 electronic wiring - Pre-mounted lamps 2918 L 324x14 T5 LD HF DA 2MG 62 4800 596x596x80 Twin-lamp ballast - EEI A2 electronic wiring - Pre-mounted lamps 2190 L 322x28 T5 LD HF 2MG 60

5200

1196x296x95

With two ballasts - EEI A2 electronic wiring - Pre-mounted lamps 2191 L 323x28 T5 LD HF 2MG 91

7800

1196x596x95

EP emergency, fuse - Pre-mounted lamps 2917 L 323x14 T5 LD HF EP 2MG

3600

596x596x80

2916

L 324x14 T5 LD HF EP 2MG

4800

596x596x80

2919

L 324x14 T5 LD HF DA EP 2MG

4800

596x596x80

Datasheets, product updates and specifications on our website: www.3f-filippi.com

169

Recessed luminaires

Code 2914

L 320 Fluo L 320 T8 2MG Code 2792

Item

EEI A2 electronic wiring - Lamps not included 21124 L 322x36 HF 2MG

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

6700

1196x296x95

21125

L 323x36 HF 2MG

107

10050

1196x596x95

21126

L 324x36 HF 2MG

142

13400

1196x596x95

Four-lamp ballast - EEI A2 electronic wiring - Lamps not included 2792 L 324x18 HF 2MG 74

5400

596x596x80

Three-lamp ballast - EEI A2 electronic wiring - Lamps not included 2012 L 323x18 HF 2MG 55

4050

596x596x80

Twin-circuit, twin-lamp ballast, lamps 1-4 and 2-3. - EEI A2 electronic wiring - Lamps not included 2013 L 324x18 HF DA 2MG 74 5400 596x596x80 EP emergency, fuse - Lamps not included 2793 L 324x18 HF EP 2MG

170

5400

596x596x80

L 320 Fluo L 320 T5 2US

L<200 cd/m² 65° E>72% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

Four-lamp ballast - EEI A2 electronic wiring - Pre-mounted lamps 2872 L 324x14 T5 LD HF 2US 62

4800

596x596x80

Three-lamp ballast - EEI A2 electronic wiring - Pre-mounted lamps 2873 L 323x14 T5 LD HF 2US 48

3600

596x596x80

Twin-circuit, twin-lamp ballast, lamps 1-4 and 2-3. - EEI A2 electronic wiring - Pre-mounted lamps 2876 L 324x14 T5 LD HF DA 2US 62 4800 596x596x80 EP emergency, fuse - Pre-mounted lamps 2875 L 323x14 T5 LD HF EP 2US

3600

596x596x80

2874

L 324x14 T5 LD HF EP 2US

4800

596x596x80

2877

L 324x14 T5 LD HF DA EP 2US

4800

596x596x80

Datasheets, product updates and specifications on our website: www.3f-filippi.com

171

Recessed luminaires

Code 2872

L 320 Fluo L 320 T8 2US Code 2882

L<200 cd/m² 65° E>63% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

Four-lamp ballast - EEI A2 electronic wiring - Pre-mounted lamps 2882 L 324x18 LD HF 2US 74

5400

596x596x80

Three-lamp ballast - EEI A2 electronic wiring - Pre-mounted lamps 2022 L 323x18 LD HF 2US 55

4050

596x596x80

Twin-circuit, twin-lamp ballast, lamps 1-4 and 2-3. - EEI A2 electronic wiring - Pre-mounted lamps 2023 L 324x18 LD HF DA 2US 74 5400 596x596x80 EEI A2 electronic wiring - Lamps not included 21133 L 321x18 HF 2US

1350

596x196x95

21134

L 322x18 HF 2US

2700

596x296x95

21135

L 321x36 HF 2US

3350

1196x196x95

21136

L 322x36 HF 2US

6700

1196x296x95

EP emergency, fuse - Pre-mounted lamps 2883 L 324x18 LD HF EP 2US

5400

596x596x80

172

L 320 Fluo L 320 T5 2S

Average luminance <200 cd/m² for radial angles >65°. 2S parabolic louvre in semi-specular aluminium, non-reflecting, with transverse blades closed at the top. Film protective against dust and finger marks, adhesive, attached to louvre.

L<200 cd/m² 65° E>75% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

Four-lamp ballast - EEI A2 electronic wiring - Pre-mounted lamps 2930 L 324x14 T5 LD HF 2S 62

4800

596x596x80

Three-lamp ballast - EEI A2 electronic wiring - Pre-mounted lamps 2931 L 323x14 T5 LD HF 2S 48

3600

596x596x80

Twin-circuit, twin-lamp ballasts, lamps 1-4 and 2-3. - EEI A2 electronic wiring - Pre-mounted lamps 2934 L 324x14 T5 LD HF DA 2S 62 4800 596x596x80 Twin-lamp ballast - EEI A2 electronic wiring - Pre-mounted lamps 2192 L 322x28 T5 LD HF 2S 60

5200

1196x296x95

With two ballasts - EEI A2 electronic wiring - Pre-mounted lamps 2193 L 323x28 T5 LD HF 2S 91

7800

1196x596x95

EP emergency, fuse - Pre-mounted lamps 2933 L 323x14 T5 LD HF EP 2S

3600

596x596x80

2932

L 324x14 T5 LD HF EP 2S

4800

596x596x80

2935

L 324x14 T5 LD HF DA EP 2S

4800

596x596x80

Datasheets, product updates and specifications on our website: www.3f-filippi.com

173

Recessed luminaires

Code 2930

L 320 Fluo L 320 T8 2S Code 2760

L<200 cd/m² 65° E>67% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

Four-lamp ballast - EEI A2 electronic wiring - Lamps not included 2760 L 324x18 HF 2S 74

5400

596x596x80

Three-lamp ballast - EEI A2 electronic wiring - Lamps not included 2032 L 323x18 HF 2S 55

4050

596x596x80

Twin-circuit, twin-lamp ballasts, lamps 1-4 and 2-3. - EEI A2 electronic wiring - Lamps not included 2033 L 324x18 HF DA 2S 74 5400 596x596x80 EP emergency, fuse - Lamps not included 2761 L 324x18 HF EP 2S

5400

596x596x80

EEI A2 electronic wiring - Lamps not included 21142 L 321x18 HF 2S

1350

596x196x95

21143

2700

596x296x95

L 322x18 HF 2S

21144

L 321x36 HF 2S

3350

1196x196x95

21145

L 322x36 HF 2S

6700

1196x296x95

21146

L 323x36 HF 2S

107

10050

1196x596x95

21147

L 324x36 HF 2S

142

13400

1196x596x95

174

L 320 Fluo L 320 T5 3AO Code 2884

Recessed luminaires

Average luminance <3000 cd/m² for radial angles >65°. 3AO louvre with square cell section, in matt silver aluminium, anti-glare. Film protective against dust and finger marks, adhesive, attached to louvre.

L<3000 cd/m² 65° E>67% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

Four-lamp ballast - EEI A2 electronic wiring - Pre-mounted lamps 2884 L 324x14 T5 LD HF 3AO 62

4800

596x596x80

Three-lamp ballast - EEI A2 electronic wiring - Pre-mounted lamps 2885 L 323x14 T5 LD HF 3AO 48

3600

596x596x80

Twin-circuit, twin-lamp ballasts, lamps 1-4 and 2-3. - EEI A2 electronic wiring - Pre-mounted lamps 2888 L 324x14 T5 LD HF DA 3AO 62 4800 596x596x80 EP emergency, fuse - Pre-mounted lamps 2887 L 323x14 T5 LD HF EP 3AO

3600

596x596x80

2886

L 324x14 T5 LD HF EP 3AO

4800

596x596x80

2889

L 324x14 T5 LD HF DA EP 3AO

4800

596x596x80

Datasheets, product updates and specifications on our website: www.3f-filippi.com

175

L 320 Fluo L 320 T8 3AO Code 2894

L<3000 cd/m² 65 E>61% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

Four-lamp ballast - EEI A2 electronic wiring - Pre-mounted lamps 2894 L 324x18 LD HF 3AO 74

5400

596x596x80

Three-lamp ballast - EEI A2 electronic wiring - Pre-mounted lamps 2052 L 323x18 LD HF 3AO 55

4050

596x596x80

Twin-circuit, twin-lamp ballasts, lamps 1-4 and 2-3. - EEI A2 electronic wiring - Pre-mounted lamps 2053 L 324x18 LD HF DA 3AO 74 5400 596x596x80 EP emergency, fuse - Pre-mounted lamps 2895 L 324x18 LD HF EP 3AO

5400

596x596x80

EEI A2 electronic wiring - Lamps not included 21153 L 321x18 HF 3AO

1350

597x196x95

21154

2700

597x296x95

L 322x18 HF 3AO

21155

L 322x36 HF 3AO

6700

1196x297x95

21156

L 324x36 HF 3AO

142

13400

1196x596x95

176

L 320 Fluo L 320 T5 SPA

SPA screen top in transparent methacrylate, externally prismatic, anti-glare, lay-in installation on the structure, without frame.

E>70% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

Four-lamp ballast - EEI A2 electronic wiring - Pre-mounted lamps 2978 L 324x14 T5 LD HF SPA 62

4800

596x596x84

Three-lamp ballast - EEI A2 electronic wiring - Pre-mounted lamps 2979 L 323x14 T5 LD HF SPA 48

3600

596x596x84

EP emergency, fuse - Pre-mounted lamps 2981 L 323x14 T5 LD HF EP SPA

3600

596x596x84

2980

4800

596x596x84

L 324x14 T5 LD HF EP SPA

L 320 T8 SPA Code 21171

SPA screen top in transparent methacrylate, externally prismatic, anti-glare, lay-in installation on the structure, without frame.

E>58% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Lamps not included 21172 L 323x18 HF SPA

4050

596x596x84

21171

5400

596x596x84

L 324x18 HF SPA

EP emergency, fuse - Lamps not included 21176 L 323x18 HF EP SPA

4050

596x596x84

21175

5400

596x596x84

L 324x18 HF EP SPA

Datasheets, product updates and specifications on our website: www.3f-filippi.com

177

Recessed luminaires

Code 2978

L 320 Fluo L 320 T5 SP Code 2847

SP transparent PMMA diffuser, prismatic exterior, anti-glare, locked to the prepainted white aluminium perimeter frame with sealing gasket, hinged opening.

E>65% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

Four-lamp ballast - EEI A2 electronic wiring - Pre-mounted lamps 2847 L 324x14 T5 LD HF SP 62

4800

596x596x80

Three-lamp ballast - EEI A2 electronic wiring - Pre-mounted lamps 2848 L 323x14 T5 LD HF SP 48

3600

596x596x80

EP emergency, fuse - Pre-mounted lamps 2850 L 323x14 T5 LD HF EP SP

3600

596x596x80

2849

4800

596x596x80

L 324x14 T5 LD HF EP SP

L 320 T8 SP Code 2857

SP transparent PMMA diffuser, prismatic exterior, anti-glare, locked to the prepainted white aluminium perimeter frame with sealing gasket, hinged opening.

E>53% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Lamps not included 21188 L 321x18 HF SP

1350

596x196x95

21189

2700

596x296x95

L 322x18 HF SP

21190

L 321x36 HF SP

3350

1196x196x95

21182

L 323x18 HF SP

4050

596x596x80

2857

L 324x18 HF SP

5400

596x596x80

21191

L 322x36 HF SP

6700

1196x296x95

21192

L 323x36 HF SP

107

10050

1196x596x95

21193

L 324x36 HF SP

142

13400

1196x596x95

178

L 320 Fluo L 320 T5 VS

Recessed luminaires

Code 2804

VS moulded glass, anti-glare, tempered, non-combustible, thickness 4 mm, locked to the white painted aluminium perimetrical frame, sealing gasket, hinged opening.

E>60% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

Four-lamp ballast - EEI A2 electronic wiring - Pre-mounted lamps 2804 L 324x14 T5 LD HF VS 62

4800

596x596x80

EP emergency, fuse - Pre-mounted lamps 2805 L 324x14 T5 LD HF EP VS

4800

596x596x80

L 320 T5 SP IP54 Code 2175

SP transparent PMMA diffuser, prismatic exterior, anti-glare, locked to the prepainted white aluminium perimeter frame with sealing gasket, hinged opening. Mounted hanging from rough ceiling or lay-installation.

E>65% Code

Item

Sources flux (lm)

Dimensions LxAxH

Four-lamp ballast - EEI A2 electronic wiring - Pre-mounted lamps 2175 L 324x14 T5 LD HF SP IP54 62

4800

596x596x95

EP emergency, fuse - Pre-mounted lamps 2177 L 324x14 T5 LD HF EP SP IP54

4800

596x596x95

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Absorbed power (W)

179

L 320 Fluo Decorative Border Eye-catching recessed luminaire with aluminium edge

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics Average luminance <200 cd/m² for radial angles >65°.

• T5 fluorescent lamps, mounted, CCT nominal color temperature 4000 K, color rendering index CRI >80.

Environments: publics, staterooms, with VDTs, schools, offices.

Mechanical characteristics Housing in hot-galvanised steel painted in white polyester. Decorative edge in semi-glossy aluminium. Parabolic louvre in specular aluminium with transverse blades closed at the top. Film protective against dust and finger marks, adhesive, attached to louvre.

On request

Electrical characteristics EEI A2 electronic wiring, 230V-50/60Hz, lamp warm start. Versions with twin-circuit (DA) available.

Installation

• luminaires with LED sources • parabolic louvres 2MG, 2US, 2S, 3DEC, 3AO • version with SP flat diffuser • white or coloured decorative edge • fuse accessory (on page 472) • wiring: dimmable, emergency

Metal panels 600x600, use fixing brackets item 15 LB.

Accessories Accessories on page 182.

Dimensions

14 A=L

6 14

180

L 320 Fluo Decorative Border L 320 Decorative Border Code 21002

Recessed luminaires

L<200 cd/m² 65° E=74% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

Four-lamp ballast - EEI A2 electronic wiring - Pre-mounted lamps 21002 L 324x14 T5 LD HF BA 2M 62

4800

599x599x80

Three-lamp ballast - EEI A2 electronic wiring - Pre-mounted lamps 21003 L 323x14 T5 LD HF BA 2M 48

3600

599x599x80

Twin-circuit, twin-lamp ballasts, lamps 1-4 and 2-3. - EEI A2 electronic wiring - Pre-mounted lamps 21010 L 324x14 T5 LD HF DA BA 2M 62 4800 599x599x80

Datasheets, product updates and specifications on our website: www.3f-filippi.com

181

L 320 Accessories Fixing bracket for pull-up installation on mineral fiber panels with low recessing space or on plasterboard. Not suitable for IP54 recessed luminaires. Pack for 1 luminaire.

Code

Item

A0177

15ZH

For squared luminaires with optic (excursion min. 0 mm, max. 60 mm), with screen or glass (excursion min. 15 mm, max. 60 mm). For rectangular luminaires (excursion min. 45 mm, max. 72 mm).

Fixing bracket for ceiling pull-up installation. Not suitable for IP54 recessed luminaires. Pack for 1 luminaire. Code

Item

A0170

15BS

For rectangular luminaires (excursion min. 18 mm, max. 45 mm).

Fixing bracket for installation coplanar with metal panels with concealed structure. Not suitable for IP54 recessed luminaires. Pack for 1 luminaire.

Code

Item

A0179

15LB

Fixing in two positions (excursion min. 23 mm, max. 36 mm) or (excursion min. 53 mm, max. 66 mm). Only for L 320 Decorative Border.

Anti-fall safety cable for fixing the housing to the building structure. Code

Item

A0477

Safety wire

This accessory is suitable only for square products (except models: L 320 LED Diffused light and IP54 versions).

182

L 320 For luminaires 80 mm high. Plug for quick connection of the luminaire, 3-pole irreversible to be snapped (Snap-in), with integrated locking device, H07 V2-U HT90° 1.5 mm² cables, for the connection to the terminal block of the luminaire. Connection for single-circuit wiring: order white plug. Connection for twin-circuit, dimmable, emergency wiring: order white plug plus black plug.

Code

Item

A0720

Wieland (white plug)

A0721

Wieland (white plug)

A0722

Ensto (white plug+ adapter)

A0725

Wieland (black plug)

A0726

Wieland (black plug)

A0727

Ensto (black plug+ adapter)

Datasheets, product updates and specifications on our website: www.3f-filippi.com

183

Recessed luminaires

Accessories

L 350 LED Recessed LED luminaire with high luminous flux

Construction characteristics

Source characteristics

Applications

• Linear LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3. • Zhaga Book 7 compliant.

Ambient temperatures up to +25°C (3AO version). Environments: architectural, commercial, exhibition areas. Environments where high levels of light are required. Warning: 3AO luminaire not suitable for installation in false ceilings without heat removal capacity. Minimum void of 200 mm required.

Mechanical characteristics Housing in hot-galvanised steel, painted in white polyester. Film protective against dust and finger marks, adhesive, attached to louvre. Electrical characteristics Electronic wiring 230V-50/60Hz. DALI electronic wiring 230V-50/60Hz. In compliance with EN 60598-1. Quick connection.

On request • sources in different powers or colour temperatures • luminaires for pull-up installation with brackets • wiring: dimmable

Accessories Accessories on page 189.

Dimensions

12.5 A=L

6 12.5

184

L 350 LED L 350 LED 3AO

Average luminance <3000 cd/m² for radial angles >65°. 3AO Decorative parabolic louvre in matt silver aluminium, antiglare, with transverse blades closed at the top and prismatic PMMA diffusers for total shielding of the louvre compartment. Film protective against dust and finger marks, adhesive, attached to louvre. L<3000 cd/m² 65 E=100% Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 260078 New L 353x25W LED 3AO 596x596

7837

596x596x80

DALI electronic 260080 New L 353x25W LED DALI 3AO 596x596

7837

596x596x80

L 350 LED SP Code 260092

SP transparent PMMA diffuser, prismatic exterior, anti-glare, locked to the prepainted white aluminium perimeter frame with sealing gasket, hinged opening.

E=100% Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 260092 L 353x14W LED SP 54V 596x596

5483

596x596x80

DALI electronic 260094 New L 353x14W LED DALI SP 54V 596x596

5483

596x596x80

Datasheets, product updates and specifications on our website: www.3f-filippi.com

185

Recessed luminaires

Code 260078

L 350 Fluo Recessed fluorescent luminaire with high luminous flux

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics Direct symmetric distribution.

• Compact fluorescent lamps, mounted, CCT nominal color temperature 4000 K, color rendering index CRI >80.

COM version Environments: architectural, commercial, exhibition areas. Environments where high levels of light are required. Important: suitable only for false ceilings with capability of heat dissipation e.g. with min. void of 200 mm and ventilation, no closed upper compartments. RSP, RVS versions Environments requiring a high level of protection, high levels of light, lamp shielding and simplified cleaning. Tempered glass is not immune to falling fragments from harmless and caused by shocks or exceptionally derived from the tempering process. RVSS version Environments in which it is necessary a total protection against falling fragments (eg environments with foodstuffs or machines with moving parts or with extreme temperature changes), use luminaires with laminated glass.

Mechanical characteristics Housing in hot-galvanised steel, painted in white polyester. COM parabolic louvre, with transverse blades closed at the top. Film protective against dust and finger marks, adhesive, attached to louvre. Flow recuperator in specular aluminium, with superficial titanium-magnesium treatment, non-iridescent. RSP flux recuperator and flat diffuser in transparent PMMA, prismatic exterior, anti-glare, white painted aluminium frame, sealing gasket, hinged opening, IP54 exposed part. RVS flux recuperator and moulded glass, tempered, with white painted aluminium frame, sealing gasket, hinged opening, IP54 exposed part. RVSS flux recuperator and laminated moulded glass, with white painted steel frame, sealing gasket, hinged opening, IP65 exposed part. Electrical characteristics EEI A2 electronic wiring, 230V-50/60Hz, lamp warm start. EP maintained emergency wiring on one single lamp, 1hr duration with 24hrs recharge, fuse. In compliance with EN 60598-2-22.

On request • low luminance louvres • luminaires for pull-up installation with brackets • fuse accessory (on page 472) • wiring: dimmable, twin-circuit • emergency inhibition

Accessories Accessories on page 189.

Dimensions 6 12.5 A=L

6 12.5

186

L 350 Fluo L 350 COM

Recessed luminaires

Code 2825

COM parabolic louvre, in specular aluminium with superficial titanium-magnesium treatment, non-iridescent, with white painted transverse blades. Film protective against dust and finger marks, adhesive, attached to louvre.

E>77% Code

Item

EEI A2 electronic wiring - Pre-mounted lamps 2825 L 353x55 C LD HF COM

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

178

12900

596x596x80

12900

596x596x80

Wiring on a separate unit - EP emergency, fuse - Pre-mounted lamps 2826 L 353x55 C LD HF EP COM 178

L 350 RSP Code 2827

Flow recuperator in specular aluminium, high efficiency, with superficial titanium-magnesium treatment, non-iridescent. SP PMMA flat diffuser, prismatic outer surface, anti-glare, locked to the white painted aluminium perimetrical frame with sealing gasket, hinged opening.

E>74% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Pre-mounted lamps 2827 L 352x55 C LD HF RSP 54V

118

8600

596x596x80

EP emergency, fuse - Pre-mounted lamps 2828 L 352x55 C LD HF EP RSP 54V

118

8600

596x596x80

Datasheets, product updates and specifications on our website: www.3f-filippi.com

187

L 350 Fluo L 350 RVS Code 2831

E>76% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Pre-mounted lamps 2831 L 352x55 C LD HF RVS 54V

118

8600

596x596x80

EP emergency, fuse - Pre-mounted lamps 2832 L 352x55 C LD HF EP RVS 54V

118

8600

596x596x80

L 350 RVSS Code 2837

Flow recuperator in specular aluminium, high efficiency, with superficial titanium-magnesium treatment, non-iridescent. VSS printed laminated dipped glass, non-combustible, stuck to the perimeter frame in white painted stainless steel, with sealing gasket, hinged opening.

E>68% Code

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Pre-mounted lamps 2837 L 352x55 C LD HF RVSS

118

8600

596x596x84

EP emergency, fuse - Pre-mounted lamps 2838 L 352x55 C LD HF EP RVSS

118

8600

596x596x84

188

Item

L 350 Accessories

Code

Item

A0173

15HI

Recessed luminaires

Fixing bracket for pull-up installation on mineral fiber panels with low recessing space or on plasterboard. Pack for 1 luminaire.

SP - RSP - RVS (excursion min. 0 mm, max. 25 mm).

Fixing bracket for pull-up installation on mineral fiber panels with low recessing space or on plasterboard. Pack for 1 luminaire.

Code

Item

A0177

15ZH

3AO - COM - RVSS (excursion min. 0 mm, max. 60 mm). SP - RSP - RVS (excursion min. 15 mm, max. 60 mm).

Anti-fall safety cable for fixing the housing to the building structure. Code

Item

A0477

Safety wire

This accessory is suitable only for square products (except models: L 350 Fluo R90 and IP54 versions).

For luminaires 80 mm high. Plug for quick connection of the luminaire, 3-pole irreversible to be snapped (Snap-in), with integrated locking device, H07 V2-U HT90° 1.5 mm² cables, for the connection to the terminal block of the luminaire. Connection for single-circuit wiring: order white plug. Connection for twin-circuit, dimmable, emergency wiring: order white plug plus black plug.

Code

Item

A0720

Wieland (white plug)

A0721

Wieland (white plug)

A0722

Ensto (white plug+ adapter)

A0725

Wieland (black plug)

A0726

Wieland (black plug)

A0727

Ensto (black plug+ adapter)

Datasheets, product updates and specifications on our website: www.3f-filippi.com

189

L 350 Fluo R90 Recessed fluorescent luminaire with high luminous flux

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics Direct symmetric distribution, wide or concentrated.

• Compact fluorescent lamps, mounted, CCT nominal color temperature 4000 K, color rendering index CRI >80.

Mechanical characteristics Housing in hot-galvanised steel, painted in white polyester. Total flux recuperator for wide or concentrated distribution, in specular aluminium with titanium-magnesium surface treatment, non-iridescent. Device to prevent lamp from falling.

On request

Environments: architectural, commercial, exhibition areas. Environments where high levels of light are required. Important: suitable only for false ceilings with capability of heat dissipation e.g. with min. void of 200 mm and ventilation, no closed upper compartments.

• fuse accessory (on page 472) • wiring: dimmable • emergency inhibition

Installation Installation following false ceiling mounting, supported by the exposed structure, minimum void of 210 mm from the structure’s lower edge.

Electrical characteristics EEI A2 electronic wiring, 230V-50/60Hz, lamp warm start. In compliance with EN 60598-1. Twin-circuit.

Dimensions

13 A=L

6 13

190

L 350 Fluo R90 L 350 R90

Total flow recuperator in specular aluminium, high efficiency, with superficial titanium-magnesium treatment, non-iridescent.

E>90% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

Twin-circuit, version with WIDE flow recuperator - EEI A2 electronic wiring - Pre-mounted lamps 4952 L 350 R90 4x40 C LD HF DA 178 14000 596x596x88 4953

L 350 R90 4x55 C LD HF DA

236

17200

596x596x88

Twin-circuit, version with CONCENTRATED flow recuperator - EEI A2 electronic wiring - Pre-mounted lamps 4972 L 350 R90 4x55 C LD HF DA CONC 236 17200 596x596x88

Datasheets, product updates and specifications on our website: www.3f-filippi.com

191

Recessed luminaires

Code 4953

New

L 390 LED Wellbeing LED fixture

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics Average luminance <3000 cd/m² for radial angles >65°. Lifetime (L90/B10): 30000 h. (Tp 65°C) Lifetime (L85/B10): 50000 h. (Tp 65°C) Lifetime (L75/B10): 80000 h. (Tp 60°C) Photobiological safety RG0, risk absent, in compliance with IEC 62471.

• LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3.

• satin louvre • different powers or colour temperatures • fluorescent version

Environments: staterooms, with VDTs, offices. Environments with exacting visual tasks, where diffused soft light for optimum visual comfort is required. These luminaires are suitable for installation both on false ceilings with metal panels with concealed structure, 600x600 mm (using brackets), and lay-installation on 600x600 mm ceiling panels with exposed structure (Armstrong type).

Accessories

Light Management

Accessories on page 196.

Mechanical characteristics Housing in white painted steel. Decorative edge in semi-glossy aluminium. Central 2MG parabolic louvre in specular aluminium with titanium-magnesium surface treatment, non-iridescent, with transverse blades, hinged opening. Opal polycarbonate diffuser for total shielding of the louvre compartment. Flat diffusers lateral to louvre, in anti-glare opal PMMA. Electrical characteristics Electronic wiring 230V-50/60Hz. DALI electronic wiring 230V-50/60Hz. In compliance with EN 60598-1.

On request

Dimensions

22 A

192

L 390 LED L 390 LED Opal 2MG

L<3000 cd/m² 65° E=100%

Code

Item

Average luminance <3000 cd/m² for radial angles >65°. 2MG parabolic louvre, high efficiency, in specular aluminium with superficial titanium-magnesium treatment, non-iridescent, with transverse blades closed at the top. Opal polycarbonate diffuser for total shielding of the louvre compartment. Film protective against dust and finger marks, adhesive, attached to louvre. Flat diffusers lateral to louvre, in anti-glare opal PMMA. Coplanar or pull-up installation.

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Coplanar or pull-up installation - Electronic 21489 L 390 32W LED 2MG OP 597x597

3480

597x597x100

21497 New

3634

1221x323x100

Coplanar or pull-up installation - DALI electronic 21491 L 390 32W LED DALI 2MG OP 597x597

3480

597x597x100

21499 New

3634

1221x323x100

L 390 2x18W LED 2MG OP 323x1221

L 390 2x18W LED DALI 2MG OP 323x1221

Datasheets, product updates and specifications on our website: www.3f-filippi.com

193

Recessed luminaires

Code 21489

L 390 LED HCL Wellbeing LED fixture

Construction characteristics

Source characteristics

Applications

• Squared LED modules, CCT nominal color temperature from 2700 K to 6500 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3.

Any environments requiring light which aims for the wellness of people. Environments with VDTs. Environments where demanding visual tasks are performed and soft diffuse light is required for optimal visual comfort and total shielding of the light source. These luminaires are suitable for installation both on false ceilings with metal panels with concealed structure, 600x600 mm (using brackets), and lay-installation on 600x600 mm ceiling panels with exposed structure (Armstrong type).

Accessories Accessories on page 196.

Light Management In this product the light intensity and color temperature can be controlled automatically or manually, with the “Controller HCL” (see “Light Management” chapter).

Electrical characteristics DALI electronic wiring 230V-50/60Hz. In compliance with EN 60598-1.

Dimensions

H 7 22 A=L

194

L 390 LED HCL L 390 LED HCL

L<3000 cd/m² 65° E=100%

Code

Item

Coplanar or pull-up installation - DALI electronic 21506 L 390 33W LED DALI HCL 2MG OP 597x597

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

3325

597x597x100

195

Recessed luminaires

Code 21506

L 390 Accessories Fixing bracket for pull-up installation on mineral fiber panels with low recessing space or on plasterboard. Pack for 1 luminaire.

Code

Item

A0177

15ZH

Pull-up installation on mineral-fibre panels or plasterboard. (excursion min. 34 mm, max. 69 mm).

Fixing bracket for pull-up installation on mineral fiber panels with low recessing space or on plasterboard. Pack for 1 luminaire.

Code

Item

A0173

15HI

Coplanar installation on metal panels with concealed structure (excursion min. 17 mm, max. 52 mm).

196

Recessed luminaires

L 400 Fluo Luminaire suitable for pull-up installation on false ceiling

Construction characteristics

Source characteristics

Accessories

Mechanical characteristics Housing in white painted steel. Parabolic louvres with transverse blades closed at the top. Film protective against dust and finger marks, adhesive, attached to louvre. PMMA flat diffuser transparent, prismatic, anti-glare, SP with exterior prismatic diffuser, prismatic interior on request, white painted aluminium frame, hinge opening, IP43 exposed part.

• T5 fluorescent lamps, mounted, CCT nominal color temperature 4000 K, color rendering index CRI >80.

Accessories on page 203.

Electrical characteristics EEI A2 electronic wiring, 230V-50/60Hz, lamp warm start. Versions with twin-circuit (DA) available.

On request • MultiWatt electronic ballasts for T5 twin-lamp wirings • SPO opal PMMA diffuser, in SP self-extinguishing V2 polycarbonate, 6.5J - 850°C or glass • fixing brackets • recessed luminaire for metal panels 500x500 • fuse accessory (on page 472) • wiring: dimmable, twin-circuit, emergency • LED version

Applications 2M, 2MG, 2US, 2S versions Environments: publics, staterooms, with VDTs, schools, offices. 3AO version Environments: architectural, commercial, exhibition areas, transit areas, lobbies or waiting rooms, shops, schools. SP version Environments requiring a high level of protection, high levels of light, lamp shielding and simplified cleaning.

Dimensions 3-4 x

25 T5

25 T8

6 H A=L

198

L 400 Fluo L 400 T8 2M Code 2245

Recessed luminaires

L<200 cd/m² 65° E>65% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Lamps not included 2244 L 403x18 HF 2M

4050

621x621x95

2245

5400

621x621x95

L 404x18 HF 2M

L 400 T5 2MG Code 27560

Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

Four-lamp ballast - EEI A2 electronic wiring - Pre-mounted lamps 27560 L 404x14 T5 HF 2MG 62

4800

621x621x95

Three-lamp ballast - EEI A2 electronic wiring - Pre-mounted lamps 27561 L 403x14 T5 HF 2MG 48

3600

621x621x95

Twin-circuit, twin-lamp ballasts, lamps 1-4 and 2-3. - EEI A2 electronic wiring - Pre-mounted lamps 27562 L 404x14 T5 HF DA 2MG 62 4800 621x621x95 With two ballasts, lamps 2 and 1-3 - EEI A2 electronic wiring - Pre-mounted lamps 27563 L 403x14 T5 HF DA 2MG 48 3600

Datasheets, product updates and specifications on our website: www.3f-filippi.com

621x621x95

199

L 400 Fluo L 400 T8 2MG Code 2248

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Lamps not included 2247 L 403x18 HF 2MG

4050

621x621x95

2248

5400

621x621x95

L 404x18 HF 2MG

L 400 T8 2US Code 2227

L<200 cd/m² 65° E>62% Code

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Lamps not included 2226 L 403x18 HF 2US

4050

621x621x95

2227

5400

621x621x95

200

Item

L 404x18 HF 2US

L 400 Fluo L 400 T5 2S

L<200 cd/m² 65° E>70%

Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

Four-lamp ballast - EEI A2 electronic wiring - Pre-mounted lamps 27590 L 404x14 T5 HF 2S 62

4800

621x621x95

Three-lamp ballast - EEI A2 electronic wiring - Pre-mounted lamps 27591 L 403x14 T5 HF 2S 48

3600

621x621x95

Twin-circuit, twin-lamp ballasts, lamps 1-4 and 2-3. - EEI A2 electronic wiring - Pre-mounted lamps 27592 L 404x14 T5 HF DA 2S 62 4800 621x621x95 With two ballasts, lamps 2 and 1-3 - EEI A2 electronic wiring - Pre-mounted lamps 27593 L 403x14 T5 HF DA 2S 48 3600

621x621x95

L 400 T8 2S Code 2242

L<200 cd/m² 65° E>65% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Lamps not included 2241 L 403x18 HF 2S

4050

621x621x95

2242

5400

621x621x95

L 404x18 HF 2S

Datasheets, product updates and specifications on our website: www.3f-filippi.com

201

Recessed luminaires

Code 27590

L 400 Fluo L 400 T8 3AO Code 2223

3AO louvre with square cell section, in matt silver aluminium, anti-glare. Film protective against dust and finger marks, adhesive, attached to louvre.

E>60% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Lamps not included 2222 L 403x18 HF 3AO

4050

621x621x95

2223

5400

621x621x95

L 404x18 HF 3AO

L 400 T8 SP Code 2225

SP transparent PMMA diffuser, prismatic exterior, anti-glare, locked to the prepainted white aluminium perimeter frame with sealing gasket, hinged opening.

E>53% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Lamps not included 2224 L 403x18 HF SP

4050

621x621x95

2225

5400

621x621x95

202

L 404x18 HF SP

L 400 Accessories

Code

Item

A0170

15BS

Recessed luminaires

Fixing bracket for ceiling pull-up installation. Pack for 1 luminaire.

Brackets for lay-installation on load bearing side profiles parallel to the luminaire (excursion min. 18 mm, max. 45 mm).

Fixing bracket for pull-up installation on mineral fiber panels with low recessing space or on plasterboard. Pack for 1 luminaire.

Code

Item

A0177

15ZH

Brackets for lay-installation on load bearing side profiles parallel to the luminaire (excursion min. 45 mm, max. 72 mm).

Datasheets, product updates and specifications on our website: www.3f-filippi.com

203

L 450 Fluo Luminaire to create continuous lighting channels

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics Symmetric and Wall Washer asymmetric lighting distribution.

• T5 fluorescent lamps, mounted, CCT nominal color temperature 4000 K, color rendering index CRI >80.

Mechanical characteristics Housing in white painted steel. Parabolic louvres with transverse blades closed at the top. Film protective against dust and finger marks, adhesive, attached to louvre. Wall Washer parabolic flux recuperator. Perfect joining of louvres/recuperators for continuous lighting channel. Screws with nuts for channel union.

On request

2MG version Environments: publics, staterooms, with VDTs, schools, offices. WW version Environments where uniform vertical illumination of walls, panels, blackboards, shelves and display units is required.

Electrical characteristics EEI A2 electronic wiring, 230V-50/60Hz, lamp warm start. In compliance with EN 60598-1.

Accessories on page 206.

• single points of light • SP flat diffuser • fuse accessory (on page 472) • wiring: dimmable, emergency

Installation For channel start and end, always order pair of end caps, see accessories. The luminaires are designed to be hung from the rough ceiling; if the ceiling is load bearing use the accessory fixing brackets item 15 HI.

Accessories

Dimensions

15.5 A

204

L 450 Fluo L 450 Fluo 2MG

Average luminance <1000 cd/m² for radial angles >65°. 2MG parabolic louvre, high efficiency, in specular aluminium with superficial titanium-magnesium treatment, non-iridescent, with transverse blades closed at the top. Film protective against dust and finger marks, adhesive, attached to louvre. L<1000 cd/m² 65° E>73% Code

Item

EEI A2 electronic wiring - Pre-mounted lamps 22400 L 451x14 T5 LD HF 2MG

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

1200

571x140x85

22402

L 451x28 T5 LD HF 2MG

2600

1171x140x85

22403

L 451x35 T5 LD HF 2MG

3300

1471x140x85

22404

L 451x49 T5 LD HF 2MG

4300

1471x140x85

22405

L 451x54 T5 LD HF 2MG

4450

1171x140x85

L 450 Fluo WW Code 22600

Wall Washer parabolic flux recuperator in semi-specular aluminium.

E>65% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Pre-mounted lamps 22596 L 451x14 T5 LD HF WW

1200

571x140x85

22598

2600

1171x140x85

L 451x28 T5 LD HF WW

22599

L 451x35 T5 LD HF WW

3300

1471x140x85

22600

L 451x49 T5 LD HF WW

4300

1471x140x85

22601

L 451x54 T5 LD HF WW

4450

1171x140x85

Datasheets, product updates and specifications on our website: www.3f-filippi.com

205

Recessed luminaires

Code 22404

L 450 Accessories Pair of terminals for luminaire closing and coupling to false ceiling, with screws and nuts for fixing to housing, always necessary. Code

Item

A0164

Pair of closing end caps L 450 T5

Fixing bracket for pull-up installation on mineral fiber panels with low recessing space or on plasterboard. Pack for 1 luminaire.

Code

Item

A0173

15HI

Brackets for lay-installation on load bearing side profiles parallel to the luminaire (excursion min. 20 mm, max. 45 mm).

206

Recessed luminaires

L 560 LED LED luminaire with high energy efficiency for installation on slats or batting

Construction characteristics

Source characteristics

Applications

• Linear LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3.

2S version Environments: with VDTs, schools, offices. SP version Environments where demanding visual tasks are performed and soft diffuse light is required for optimal visual comfort and total shielding of the light source.

Mechanical characteristics Housing in white painted steel. 2S parabolic louvre in semispecular aluminium with transverse blades closed at the top and prismatic PMMA diffusers for total shielding of the louvre compartment. Film protective against dust and finger marks, adhesive, attached to louvre. SP transparent PMMA diffuser, prismatic, anti-glare, locked to the pre-painted white aluminium perimeter frame with sealing gasket, hinged opening. Electrical characteristics Electronic wiring 230V-50/60Hz. In compliance with EN 60598-1.

On request • parabolic louvres 2M, 2MG, 2US, 3AO • different powers or colour temperatures • diffuser in SMP microprismatic PMMA or SP polycarbonate, Selfextinguishing V2 • wiring: dimmable, emergency

Accessories Accessories on page 215.

Dimensions H 6 25 A H 6 25 L

208

L 560 LED L 560 LED 2S

1x - Average luminance <1000 cd/m² for radial angles >65°. 2x - Average luminance <1500 cd/m² for radial angles >65°. 2S parabolic louvre in semi-specular aluminium, non-reflecting, with transverse blades closed at the top. Prismatic PMMA diffuser for total shielding of the louvre compartment. Film protective against dust and finger marks, adhesive, attached to louvre. L<1000 cd/m² 65° E=100% Code

Item

Electronic 270931 L 561x12W LED 2S 221x647

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

14.5

1394

647x221x95

270937

L 562x12W LED 2S 221x647

29.5

2664

647x221x95

270933

L 561x24W LED 2S 221x1256

2786

1256x221x95

270935

L 561x30W LED 2S 221x1556

3482

1556x221x95

270939

L 562x24W LED 2S 221x1256

5327

1256x221x95

270941

L 562x30W LED 2S 221x1556

6659

1556x221x95

L 560 LED SP Code 270961

SP transparent PMMA diffuser, prismatic exterior, anti-glare, locked to the prepainted white aluminium perimeter frame with sealing gasket, hinged opening.

E=100% Code

Item

Electronic 270957 L 561x12W LED SP 221x647

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

14.5

1435

647x221x95

270963

L 562x12W LED SP 221x647

29.5

2806

647x221x95

270959

L 561x24W LED SP 221x1256

2869

1256x221x95

270961

L 561x30W LED SP 221x1556

3588

1556x221x95

270965

L 562x24W LED SP 221x1256

5612

1256x221x95

270967

L 562x30W LED SP 221x1556

7015

1556x221x95

Datasheets, product updates and specifications on our website: www.3f-filippi.com

209

Recessed luminaires

Code 270935

L 560 Fluo Luminaire for false ceiling with staves (100 or 200 millimetre spacing) or plasterboard

Construction characteristics

Source characteristics

Applications

Mechanical characteristics Housing in white painted steel. Parabolic louvres with transverse blades closed at the top. Film protective against dust and finger marks, adhesive, attached to louvre. L 562 version without longitudinal central V-shaped element. Flat diffuser in transparent PMMA, prismatic, anti-glare, locked to the white aluminium perimeter frame, hinged opening.

• T5 fluorescent lamps, mounted, CCT nominal color temperature 4000 K, color rendering index CRI >80.

2M, 2MG, 2US, 2S versions Environments: publics, staterooms, with VDTs, transit areas, schools, offices. SP version Environments requiring a high level of protection, high levels of light, lamp shielding and simplified cleaning.

Electrical characteristics EEI A2 electronic wiring, 230V-50/60Hz, lamp warm start. In compliance with EN 60598-1.

On request • parabolic louvre 3AO • SPO opal PMMA diffuser or SP selfextinguishing V2 6.5J - IK08 - 850°C • fixing brackets • fuse accessory (on page 472) • wiring: dimmable, twin-circuit, emergency • L 550 luminaires for staves spaced 100, 150, 300 mm

Accessories Accessories on page 215.

Dimensions H 6 25 A H 6 25 L

210

L 560 Fluo L 560 T8 2M Code 22283

Recessed luminaires

1x - Average luminance <200 cd/m² for radial angles >65°. 2x - Average luminance <1000 cd/m² for radial angles >65°. 2M parabolic louvre in specular aluminium, with transverse blades closed at the top. Film protective against dust and finger marks, adhesive, attached to louvre. L<200 cd/m² 65° E>65% Code

Item

EEI A2 electronic wiring - Lamps not included 22281 L 561x18 HF 2M

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

1350

647x221x95

22284

L 562x18 HF 2M

2700

647x221x95

22282

L 561x36 HF 2M

3350

1256x221x95

22283

L 561x58 HF 2M

5200

1556x221x95

22285

L 562x36 HF 2M

6700

1256x221x95

22286

L 562x58 HF 2M

109

10400

1556x221x95

L 560 T5 2MG Code 27525

1x - Average luminance <200 cd/m² for radial angles >65°. 2x - Average luminance <1000 cd/m² for radial angles >65°. 2MG parabolic louvre, high efficiency, in specular aluminium with superficial titanium-magnesium treatment, non-iridescent, with transverse blades closed at the top. Film protective against dust and finger marks, adhesive, attached to louvre. L<200 cd/m² 65° E>71% Code

Item

EEI A2 electronic wiring - Pre-mounted lamps 27523 L 561x14 T5 LD HF 2MG

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

1200

647x221x95

27528

L 562x14 T5 LD HF 2MG

2400

647x221x95

27524

L 561x28 T5 LD HF 2MG

2600

1256x221x95

27526

L 561x35 T5 LD HF 2MG

3300

1556x221x95

27527

L 561x49 T5 LD HF 2MG

4300

1556x221x95

27525

L 561x54 T5 LD HF 2MG

4450

1256x221x95

27529

L 562x28 T5 LD HF 2MG

5200

1256x221x95

27531

L 562x35 T5 LD HF 2MG

6600

1556x221x95

27532

L 562x49 T5 LD HF 2MG

106

8600

1556x221x95

27530

L 562x54 T5 LD HF 2MG

114

8900

1256x221x95

Datasheets, product updates and specifications on our website: www.3f-filippi.com

211

L 560 Fluo L 560 T8 2MG Code 22304

Item

EEI A2 electronic wiring - Lamps not included 22300 L 561x18 HF 2MG

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

1350

647x221x95

22303

L 562x18 HF 2MG

2700

647x221x95

22301

L 561x36 HF 2MG

3350

1256x221x95

22302

L 561x58 HF 2MG

5200

1556x221x95

22304

L 562x36 HF 2MG

6700

1256x221x95

22305

L 562x58 HF 2MG

109

10400

1556x221x95

L 560 T8 2US Code 22313

1x - Average luminance <200 cd/m² for radial angles >65°. 2x - Average luminance <1000 cd/m² for radial angles >65°. 2US parabolic louvre in semi-glossy aluminium, anti-glare, with transverse blades closed at the top. Film protective against dust and finger marks, adhesive, attached to louvre. L<200 cd/m² 65° E>62% Code

Item

EEI A2 electronic wiring - Lamps not included 22311 L 561x18 HF 2US

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

1350

647x221x95

22314

L 562x18 HF 2US

2700

647x221x95

22312

L 561x36 HF 2US

3350

1256x221x95

22313

L 561x58 HF 2US

5200

1556x221x95

22315

L 562x36 HF 2US

6700

1256x221x95

22316

L 562x58 HF 2US

109

10400

1556x221x95

212

L 560 Fluo L 560 T5 2S

1x - Average luminance <200 cd/m² for radial angles >65°. 2x - Average luminance <1000 cd/m² for radial angles >65°. 2S parabolic louvre in semi-specular aluminium, non-reflecting, with transverse blades closed at the top. Film protective against dust and finger marks, adhesive, attached to louvre. L<200 cd/m² 65° E>63% Code

Item

EEI A2 electronic wiring - Pre-mounted lamps 27544 L 561x14 T5 LD HF 2S

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

1200

647x221x95

27549

L 562x14 T5 LD HF 2S

2400

647x221x95

27545

L 561x28 T5 LD HF 2S

2600

1256x221x95

27547

L 561x35 T5 LD HF 2S

3300

1556x221x95

27548

L 561x49 T5 LD HF 2S

4300

1556x221x95

27546

L 561x54 T5 LD HF 2S

4450

1256x221x95

27550

L 562x28 T5 LD HF 2S

5200

1256x221x95

27552

L 562x35 T5 LD HF 2S

6600

1556x221x95

27553

L 562x49 T5 LD HF 2S

106

8600

1556x221x95

27551

L 562x54 T5 LD HF 2S

114

8900

1256x221x95

L 560 T8 2S Code 22334

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Lamps not included 22330 L 561x18 HF 2S

1350

647x221x95

22333

2700

647x221x95

L 562x18 HF 2S

22331

L 561x36 HF 2S

3350

1256x221x95

22332

L 561x58 HF 2S

5200

1556x221x95

22334

L 562x36 HF 2S

6700

1256x221x95

22335

L 562x58 HF 2S

109

10400

1556x221x95

Datasheets, product updates and specifications on our website: www.3f-filippi.com

213

Recessed luminaires

Code 27546

L 560 Fluo L 560 T8 SP Code 22370

1x - Average luminance <3000 cd/m² for radial angles >65°. SP transparent PMMA diffuser, prismatic exterior, anti-glare, locked to the prepainted white aluminium perimeter frame with sealing gasket, hinged opening. Sealing gasket for IP54 totally protected luminaires.

E>57% Code

Item

EEI A2 electronic wiring - Lamps not included 22368 L 561x18 HF SP

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

1350

647x221x95

22371

L 562x18 HF SP

2700

647x221x95

22369

L 561x36 HF SP

3350

1256x221x95

22370

L 561x58 HF SP

5200

1556x221x95

22372

L 562x36 HF SP

6700

1256x221x95

22373

L 562x58 HF SP

109

10400

1556x221x95

Overall IP54 version. Installation by hanging from rough ceiling. - EEI A2 electronic wiring - Lamps not included 22376 L 561x18 HF IP54 SP 19 1350 647x221x95 22378

L 562x18 HF IP54 SP

2700

647x221x95

22377

L 561x36 HF IP54 SP

3350

1256x221x95

22379

L 562x36 HF IP54 SP

6700

1256x221x95

214

L 560 Accessories

Code

Item

A0170

15BS

Recessed luminaires

Fixing bracket for ceiling pull-up installation. Not suitable for IP54 recessed luminaires. Pack for 1 luminaire.

Brackets for lay-installation on load bearing side profiles parallel to the luminaire (excursion min. 18 mm, max. 45 mm).

Fixing bracket for pull-up installation on mineral fiber panels with low recessing space or on plasterboard. Not suitable for IP54 recessed luminaires. Pack for 1 luminaire.

Code

Item

A0177

15ZH

Brackets for lay-installation on load bearing side profiles parallel to the luminaire. Excursion min. 45 mm, max. 72 mm.

Head fixings bracket for installation of the luminaire on load bearing structures (transverse by the luminaire). Not suitable for IP54 recessed luminaires. Pack for 1 luminaire.

Code

Item

A0174

15DP

The bracket protruding 55 mm beyond the head side. Excursion min. 60 mm, max. 80 mm.

Head fixings bracket for installation of the luminaire on load bearing structures (transverse by the luminaire). Not suitable for IP54 recessed luminaires. Pack for 1 luminaire.

Code

Item

A0175

15GF

The bracket protruding 60 mm beyond the head side. Excursion min. 40 mm, max. 60 mm.

Head fixings bracket for installation of the luminaire on load bearing structures (transverse by the luminaire). Not suitable for IP54 recessed luminaires. Pack for 1 luminaire.

Code

Item

A0176

15XB

The bracket protruding 55 mm beyond the head side. Excursion min. 20 mm, max. 40 mm.

Datasheets, product updates and specifications on our website: www.3f-filippi.com

215

L 580 LED IP54V LED luminaire with increased ingress protection

Construction characteristics

Source characteristics

Applications

• Squared LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3.

Environments: hospital premises, aseptic, sterilized, laboratories. Environments requiring a high level of protection, high levels of light, source shielding and simplified cleaning.

Mechanical characteristics Housing in white painted steel. Electrical characteristics Electronic wiring 230V-50/60Hz. In compliance with EN 60598-1.

On request • sources in different powers or colour temperatures • wiring: dimmable, emergency

Accessories Accessories on page 222.

Dimensions Standard

H 6 12.5 A=L

H 6 25 A=L

216

L 580 LED IP54V L 580 LED VS

L<3000 cd/m² 65° E=100%

Code

Item

Average luminance <3000 cd/m² for radial angles >65°. Anti-glare microprismatic VS moulded glass, tempered, not flammable, locked to the prepainted white aluminium perimeter frame with sealing gasket, hinged opening. BL version with wide edge.

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 21454 L 580 32W LED VS 596x596

3480

596x596x100

Wide edge - Electronic 21461 L 580 32W LED BL VS 621x621

3480

621x621x100

L 580 LED SP Code 21440

L<3000 cd/m² 65° E=100%

Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 21440 L 580 32W LED SP 596x596

3672

596x596x100

Wide edge - Electronic 21447 L 580 32W LED BL SP 621x621

3672

621x621x100

Datasheets, product updates and specifications on our website: www.3f-filippi.com

217

Recessed luminaires

Code 21454

L 580 Fluo IP54 Luminaire with increased ingress protection

Construction characteristics

Source characteristics

Mechanical characteristics Housing in white painted steel. RVS flux recuperator and glass, noncombustible, thickness 4 mm, tempered, locked to the white aluminium perimeter frame, sealing gasket, hinged opening. Flux recuperator and diffuser in RSP transparent PMMA, prismatic exterior, anti-glare, locked to the white aluminium perimeter frame, sealing gasket, hinged opening. 2US VT louvre and glass, in semi-glossy aluminium, antiglare lamp, with transverse blades closed at the top, and noncombustible glass, thickness 4 mm, tempered, locked to the white aluminium perimeter frame, sealing gasket, hinged opening. Total IP54 protection degree.

• Fluorescent compact lamps, CCT nominal color temperature 4000 K, color rendering index CRI >80.

On request

changes, and in general in any environments requiring total protection against falling fragments, use use on request versions L 580 RP with polycarbonate diffuser or specific luminaires with laminated glass (see series L 350 and L 590) with appropriate frame.

Installation

• RSP PC polycarbonate diffuser • fuse accessory (on page 472) • wiring: dimmable, emergency

Applications Environments: hospital premises, aseptic, sterilised rooms, laboratories. Environments requiring a high level of protection, high levels of light, lamp shielding and simplified cleaning. In environments with foodstuffs or machines with parts in motion, with considerable sudden temperature

Hanging from rough ceiling for panels with concealed structure or plasterboard, lay-installation for panels with exposed structure. 3x55C version for panels with exposed structure.

Dimensions

6H A

12.5

6 A=L

6 A

218

6 A

12.5

6 A

6 12.5

L 580 Fluo IP54 L 580 T5 RVS MultiWatt

E>61%

Code

Item

Flow recuperator in white painted steel, high reflection. VS moulded glass, anti-glare, tempered, non-combustible, thickness 4 mm, locked to the white painted aluminium perimetrical frame, sealing gasket, hinged opening. EEI A2 multiwatt electronic wiring, 230V-50/60Hz, lamp warm start. In compliance with EN 60598-1. Twin-circuit in 4x14-24 version. BL version with wide edge.

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

Electronic MultiWatt EEI A2 - Lamps not included 27640 L 584x14-24 T5 HF DA RVS

62-98

4800-7000

596x596x95

27643

60-114

5200-8900

1196x296x95

L 582x28-54 T5 HF RVS

Wide edge - Electronic MultiWatt EEI A2 - Lamps not included 27661 L 584x14-24 T5 HF DA BL RVS 62-98

4800-7000

621x621x95

27664

5200-8900

1221x321x95

L 582x28-54 T5 HF BL RVS

60-114

L 580 RVS Code 2532

E>64%

Code

Item

EEI A2 electronic wiring - Lamps supplied 2532 L 583x55 C LD HF CR RVS

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Flow recuperator in specular aluminium, high efficiency, with superficial titanium-magnesium treatment, non-iridescent. VS moulded glass, anti-glare, tempered, non-combustible, thickness 4 mm, locked to the white painted aluminium perimetrical frame, sealing gasket, hinged opening. Fast connection, housing with slot and polycarbonate cover, M20x1.5 cable gland to access the terminal block. EEI A2 electronic wiring, 230V-50/60Hz, lamp warm start. In compliance with EN 60598-1.

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

178

12900

596x596x145

219

Recessed luminaires

Code 27640

L 580 Fluo IP54 L 580 T5 RSP MultiWatt Code 27724

E>61%

Code

Item

Flow recuperator in white painted steel, high reflection. SP transparent PMMA diffuser, prismatic exterior, anti-glare, locked to the prepainted white aluminium perimeter frame with sealing gasket, hinged opening. EEI A2 multiwatt electronic wiring, 230V-50/60Hz, lamp warm start. In compliance with EN 60598-1. Twin-circuit in 4x14-24 version. BL version with wide edge.

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

Electronic MultiWatt EEI A2 - Lamps not included 27724 L 584x14-24 T5 HF DA RSP

62-98

4800-7000

596x596x95

27727

60-114

5200-8900

1196x296x95

Wide edge - Electronic MultiWatt EEI A2 - Lamps not included 27745 L 584x14-24 T5 HF DA BL RSP 62-98

4800-7000

621x621x95

27748

5200-8900

1221x321x95

L 582x28-54 T5 HF RSP

L 582x28-54 T5 HF BL RSP

60-114

L 580 T5 2US VT MultiWatt Code 27682

L<1000 cd/m² 65° E>58%

Code

Item

Electronic MultiWatt EEI A2 - Lamps not included 27682 L 584x14-24 T5 HF DA CR 2US VT

220

Average luminance <1000 cd/m² for radial angles >65°. 2US parabolic louvre in semi-glossy aluminium, anti-glare, with transverse blades closed at the top. Transparent glass VT tempered, non-combustible, thickness 4 mm, locked to the white painted aluminium perimetrical frame, sealing gasket, hinged opening. Fast connection, housing with slot and polycarbonate cover, M20x1.5 cable gland to access the terminal block. EEI A2 multiwatt electronic wiring, 230V-50/60Hz, lamp warm start. In compliance with EN 60598-1. Twin-circuit.

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

62-98

4800-7000

596x596x145

L 580 Fluo IP54 L 580 2US VT

L<1000 cd/m² 65° E>55%

Code

Item

EEI A2 electronic wiring - Pre-mounted lamps 2534 L 583x55 C LD HF CR 2US VT

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Average luminance <1000 cd/m² for radial angles >65°. 2US parabolic louvre in semi-glossy aluminium, anti-glare, with transverse blades closed at the top. Transparent glass VT tempered, non-combustible, thickness 4 mm, locked to the white painted aluminium perimetrical frame, sealing gasket, hinged opening. Fast connection, housing with slot and polycarbonate cover, M20x1.5 cable gland to access the terminal block. EEI A2 electronic wiring, 230V-50/60Hz, lamp warm start. In compliance with EN 60598-1.

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

178

12900

596x596x145

221

Recessed luminaires

Code 2534

L 580 Accessories Fixing bracket for pull-up installation on mineral fiber panels or on plasterboard. Pack for 1 luminaire. Code

Item

A0177

15ZH

Excursion min. 34 mm, max. 69 mm. Can only be used with the model L 580 LED IP54V.

Fixing bracket for pull-up installation on mineral fiber panels or on plasterboard. Pack for 1 luminaire. Code

Item

A0173

15HI

Excursion min. 17 mm, max. 52 mm. Can only be used with the model L 580 LED IP54V.

222

Recessed luminaires

L 590 Fluo IP65 Luminaire with high ingress protection and excellent visual comfort

Construction characteristics

On request

Mechanical characteristics Housing in white painted steel. Perimetrical frame in white painted stainless steel, sealing gasket, hinged opening, stainless steel closing screws. RVS version with flow recuperator in high-reflecting aluminium and moulded tempered glass. 2US VT version with parabolic louvre with transverse blades closed at the top and tempered transparent glass. Total IP65 protection degree.

• lamps in different powers or colour temperatures • transparent laminated glass • fixing brackets (advise the false ceiling type) • fuse accessory (on page 472) • wiring: dimmable, emergency • luminaires with electronic wiring, in compliance with 94/9/CE (ATEX) standard, group II, category 3D, for Zone 22

Tempered glass is not immune to falling fragments from harmless and caused by shocks or exceptionally derived from the tempering process. RVS version Environments requiring a high level of protection, high levels of light, lamp shielding and simplified cleaning. 2US VT version Environments with exacting visual tasks, where diffused soft light for optimum visual comfort is required.

Applications

Installation

Environments: hospital premises, transit areas, laboratories, platform-roof, underpasses. Environments: sterilized, aseptic. In hospital environments, food industry or machines with parts in motion, with considerable sudden temperature changes, and in general in any environments requiring total protection against falling fragments, use luminaires with laminated glass only.

Hanging from rough ceiling for panels with concealed or exposed structure and plasterboard.

Source characteristics • 55W compact fluorescent lamps, CCT nominal color temperature 4000 K, color rendering index CRI >80.

Dimensions H A

H 33 A=L

224

L 590 Fluo IP65 L 590 T5 RVS MultiWatt

E>60%

Code

Item

Electronic MultiWatt EEI A2 - Lamps not included 27902 L 594x14-24 T5 HF DA RVS

Flow recuperator in specular aluminium, high efficiency, with superficial titanium-magnesium treatment, non-iridescent. VS moulded glass, anti-glare, tempered, non-combustible, thickness 4 mm, locked to the white painted stainless steel perimetrical frame, sealing gasket, hinged opening. Stainless steel closing screws. EEI A2 multiwatt electronic wiring, 230V-50/60Hz, lamp warm start. In compliance with EN 60598-1. Twin-circuit.

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

62-98

4800-7000

599x599x145

27907

L 592x28-54 T5 HF RVS

60-114

5200-8900

1199x299x95

27903

L 594x28-54 T5 HF DA RVS

120-228

10400-17800

1199x599x95

L 590 RVS Code 2578

Total flow recuperator in specular aluminium, high efficiency, with superficial titanium-magnesium treatment, non-iridescent. VS moulded glass, anti-glare, tempered, non-combustible, thickness 4 mm, locked to the white painted stainless steel perimetrical frame, sealing gasket, hinged opening. Stainless steel closing screws. EEI A2 electronic wiring, 230V-50/60Hz, lamp warm start. In compliance with EN 60598-1. E>60%

Code

Item

EEI A2 electronic wiring - Pre-mounted lamps 2578 L 593x55C HF RVS

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

178

12900

599x599x145

225

Recessed luminaires

Code 27902

L 590 Fluo IP65 L 590 T5 2US VT MultiWatt Code 27919

L<1000 cd/m² 65° E>55%

Code

Item

Electronic MultiWatt EEI A2 - Lamps not included 27919 L 594x14-24 T5 HF DA 2US VT

Average luminance <1000 cd/m² for radial angles >65°. 2US parabolic louvre in semi-glossy aluminium, anti-glare, with transverse blades closed at the top. Transparent glass VT tempered, non-combustible, thickness 4 mm, locked to the white painted stainless steel perimetrical frame, sealing gasket, hinged opening. Stainless steel closing screws. EEI A2 multiwatt electronic wiring, 230V-50/60Hz, lamp warm start. In compliance with EN 60598-1. Twin-circuit in 4x versions.

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

62-98

4800-7000

599x599x145

L 590 2US VT Code 2589

L<1000 cd/m² 65° E>55%

Code

Item

EEI A2 electronic wiring - Pre-mounted lamps 2589 L 593x55C HF 2US VT

226

Average luminance <1000 cd/m² for radial angles >65°. 2US parabolic louvre in semi-glossy aluminium, anti-glare, with transverse blades closed at the top. Transparent glass VT tempered, non-combustible, thickness 4 mm, locked to the white painted stainless steel perimetrical frame, sealing gasket, hinged opening. Stainless steel closing screws. EEI A2 electronic wiring, 230V-50/60Hz, lamp warm start. In compliance with EN 60598-1.

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

178

12900

599x599x145

L 590 Accessories

Code

Item

A0187

Anti-condensation cable gland

Recessed luminaires

Anti-condensation diffuser cable gland.

Recommended for installations in environments with temperature sudden changes or subject to condensation.

Datasheets, product updates and specifications on our website: www.3f-filippi.com

227

Barraluce L LED LED channel system for high energy efficiency systems

Construction characteristics

Source characteristics

Applications

• Linear LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3.

Environments: with VDTs, meeting rooms, offices. Environments: architectural, commercial, staterooms, banks. Environments where dynamic, soft and diffuse light is required for optimal visual comfort.

Mechanical characteristics Housing in white painted extruded aluminium. Removable gear-tray, functions as flux recuperator, in specular aluminium, high efficiency, with titanium-magnesium surface treatment, non-iridescent. OP flat diffuser in opal PMMA. SP flat diffuser in prismatic PMMA. Electrical characteristics Electronic wiring 230V-50/60Hz. 1+1 wiring in twincircuit. Head entrance feeding. Channel luminaires: through-wiring, 5-pole, 2.5mm² section with irreversible fastconnection plug/socket, with irreversible fast-connection socket for branch, connecting to the socket positioned on the gear-tray unit. In compliance with EN 60598-1.

On request • wiring: dimmable, emergency • possibility to create lighting corners • micro-prismatic diffuser

Accessories Accessories on page 236.

Dimensions

Single L

Channel L

228

Barraluce L LED Barraluce L LED Opal - Single

Luminaire for standalone installation with aluminium end caps (included). OP opal methacrylate flat diffuser, anti-glare.

E=100% Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 269346 Barraluce L 1x30W LED OP L1496

3513

1496x140x100

269348

7026

2962x140x100

Barraluce L 1+1x30W LED OP L2962

Barraluce L LED Opal - Channel Code 269356

Luminaire for continuous channel installation (end caps not included). OP opal methacrylate flat diffuser, anti-glare.

E=100% Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 269354 Barraluce L 1x30W LED OP 5P L1466

3513

1466x140x100

269356

7026

2932x140x100

Barraluce L 1+1x30W LED OP 5P L2932

Datasheets, product updates and specifications on our website: www.3f-filippi.com

229

Recessed luminaires

Code 269346

Barraluce L LED Barraluce L LED SP - Single Code 269330

Average luminance <3000 cd/m² for radial angles >65°. Luminaire for standalone installation with aluminium end caps (included). SP flat diffuser in PMMA transparent prismatic methacrylate, anti-glare.

L<3000 cd/m² 65° E=100% Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 269330 Barraluce L 1x30W LED SP L1496

3798

1496x140x100

269332

7596

2962x140x100

Barraluce L 1+1x30W LED SP L2962

Barraluce L LED SP - Channel Code 269340

Average luminance <3000 cd/m² for radial angles >65°. Luminaire for continuous channel installation (end caps not included). SP flat diffuser in PMMA transparent prismatic methacrylate, anti-glare.

L<3000 cd/m² 65° E=100% Code

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 269338 Barraluce L 1x30W LED SP 5P L1466

3798

1466x140x100

269340

7596

2932x140x100

230

Item

Barraluce L 1+1x30W LED SP 5P L2932

Recessed luminaires

Barraluce L Opal Fluo Fluorescent luminaire with high visual comfort

Construction characteristics

On request

Applications

Illuminotechnical characteristics Direct diffused symmetric distribution.

• fuse accessory (on page 472) • wiring: dimmable, emergency • micro-prismatic diffuser

Environments: architectural, commercial, staterooms, lobbies or waiting rooms, corridors. Environments where demanding visual tasks are performed and comfortable lighting is required.

Mechanical characteristics Housing in white painted extruded aluminium. Removable gear-tray in white painted steel. OP flat diffuser in opal PMMA.

Accessories Accessories on page 236.

Electrical characteristics EEI A2 multiwatt electronic wiring, 230V-50/60Hz, lamp warm start. In compliance with EN 60598-1. Head entrance feeding. Channel luminaires: through-wiring, 5-pole, 2.5mm² section with irreversible fastconnection plug/socket, with irreversible fast-connection socket for branch, connecting to the socket positioned on the gear-tray unit. Lamps excluded.

Dimensions Single H

L IFC 1x

A L

IFC 1+1x L IC L

232

Barraluce L Opal Fluo Barraluce L Opal - Single

Luminaire for standalone installation with aluminium end caps. OP opal methacrylate flat diffuser, anti-glare.

E>57% Code

Item

Electronic MultiWatt EEI A2 - Lamps not included 260171 Barraluce L 1x28-54 T5 HF OP

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

31-58

2600-4450

1201x140x100

260182

Barraluce L 1x35-49-80 T5 HF OP

38-53-86

3300-4300-6150

1501x140x100

260565

Barraluce L 2x28-54 T5 HF OP

60-114

5200-8900

1201x140x100

260572

Barraluce L 2x35-49-80 T5 HF OP

76-106-170

6600-8600-12300

1501x140x100

Barraluce L Opal - Channel Code 265014

Luminaire for continuous channel installation (end caps not included). OP opal methacrylate flat diffuser, anti-glare.

E>57% Code

Item

Absorbed power (W)

IFC Start/End Channel - Electronic MultiWatt EEI A2 - Lamps not included 265007 Barraluce L 1x28-54 T5 HF OP IFC 5P 31-58

Sources flux (lm)

Dimensions LxAxH

2600-4450

1122x140x100

265014

Barraluce L 1x35-49-80 T5 HF OP IFC 5P

38-53-86

3300-4300-6150

1422x140x100

265021

Barraluce L 1+1x28-54 T5 HF OP IFC 5P

60-114

5200-8900

2191x140x100

265028

Barraluce L 1+1x35-49-80 T5 HF OP IFC 5P

76-106-170

6600-8600-12300

2791x140x100

IC Channel Intermediate - Electronic MultiWatt EEI A2 - Lamps not included 265879 Barraluce L 1+1x28-54 T5 HF OP IC 5P 60-114 5200-8900

2138x140x100

265886

2738x140x100

Barraluce L 1+1x35-49-80 T5 HF OP IC 5P

Datasheets, product updates and specifications on our website: www.3f-filippi.com

76-106-170

6600-8600-12300

233

Recessed luminaires

Code 260182

Barraluce L 2MG Fluo Fluorescent luminaire with luminance control

Construction characteristics

On request

Applications

Illuminotechnical characteristics Direct symmetric distribution.

• fuse accessory (on page 472) • wiring: dimmable, emergency

Mechanical characteristics Housing in white painted extruded aluminium. Removable gear-tray in white painted steel. 2MG parabolic louvre, high efficiency, in specular aluminium with superficial titanium-magnesium treatment, noniridescent, with transverse blades closed at the top. Film protective against dust and finger marks, attached to louvre.

Accessories

Environments: architectural, commercial, staterooms, with VDTs, banks, shops, offices. Environments where demanding visual tasks are performed and comfortable lighting is required.

Accessories on page 236.

Dimensions Single L H IFC 1x A

L IFC 1+1x L IC L

234

Barraluce L 2MG Fluo Barraluce L 2MG - Single

Average luminance <1000 cd/m² for radial angles >65°. Luminaire for standalone installation with aluminium end caps (included). 2MG parabolic louvre, high efficiency, in specular aluminium with superficial titanium-magnesium treatment, non-iridescent, with transverse blades closed at the top. Film protective against dust and finger marks, adhesive, attached to louvre. L<1000 cd/m² 65° E>77% Code

Item

Electronic MultiWatt EEI A2 - Lamps not included 263060 Barraluce L 1x28-54 T5 HF 2MG

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

31-58

2600-4450

1201x140x100

263071

Barraluce L 1x35-49-80 T5 HF 2MG

38-53-86

3300-4300-6150

1501x140x100

263455

Barraluce L 2x28-54 T5 HF 2MG

60-114

5200-8900

1201x140x100

263462

Barraluce L 2x35-49-80 T5 HF 2MG

76-106-170

6600-8600-12300

1501x140x100

Barraluce L 2MG - Channel Code 268011

Average luminance <1000 cd/m² for radial angles >65°. Luminaire for continuous channel installation (end caps not included), with light continuity even in the junction. 2MG parabolic louvre, high efficiency, in specular aluminium with superficial titanium-magnesium treatment, non-iridescent, with transverse blades closed at the top. Film protective against dust and finger marks, adhesive, attached to louvre. L<1000 cd/m² 65° E>77% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

Electronic MultiWatt EEI A2 - Lamps not included 268004 Barraluce L 1x28-54 T5 HF 2MG 5P

31-58

2600-4450

1171x140x100

268011

38-53-86

3300-4300-6150

1471x140x100

Barraluce L 1x35-49-80 T5 HF 2MG 5P

268018

Barraluce L 1+1x28-54 T5 HF 2MG 5P

60-114

5200-8900

2342x140x100

268025

Barraluce L 1+1x35-49-80 T5 HF 2MG 5P

76-106-170

6600-8600-12300

2942x140x100

Datasheets, product updates and specifications on our website: www.3f-filippi.com

235

Recessed luminaires

Code 263071

Barraluce L Accessories Free-position sliding bracket in stainless steel. Code

Item

A0483

Sliding bracket Barraluce L

To be used with inspectable false-ceilings.

Brackets for installing the product on platerboard. Code

Item

A01420 New

Couple brackets for Barraluce L

Linear connecting elements in hotgalvanised steel with grub screws for fast and rigid installation.

Code

Item

A01423

Linear connecting elements Barraluce

Pair of end caps for channels, in white painted aluminium, with screws for fixing to housing, always required. Thickness: 15 mm each cap.

Code

Item

A01417

Pair end caps Barraluce L channel diffuser

A01418

Pair end caps Barraluce L channel louvre

Terminal block (plug/socket) with irreversible snap-in double clamp, for power-supply connection at beginning and end of the channel, 5 poles.

236

Code

Item

A02484

5P socket/plug terminal block Beginning/End Channel

Recessed luminaires

News and updates available on: www.3f-filippi.com > Products > Systems

Systems Page

Product

240

3F Linux New 3F Linux S

Screen

248

New 3F Linux L

LED

New 3F Linux D

LED

•

256

New 3F Linux DR

LED

•

264 270

Lens

254

262

Optic

•

Binario 3F New Binario 3F

LED

3F Rocket

270

New 3F Rocket M

LED

•

272

New 3F Rocket L

LED

•

275

3F Fil

276

New 3F Fil LED

LED

•

Systems

246

Source

•

239

3F Linux Simply modular

3F Linux is a modular system designed to allow you to compose channels as simply and efficiently as possible. Like all products in the 3F Filippi range, it is fitted with high-efficiency LED sources and features a compact body, modular components and accessories which give unrivalled freedom in terms of planning the installations.

240

u Lin

Systems

3F Linux

Product strengths • System for the creation and composition of channels which combines the various electrical requirements with the specific lighting design requirements. • When installed, it disappears from sight due to its clean, minimalist lines offering high performance. • Its flexibility lends it to installation in commercial environments requiring high levels of lighting, and in circulation areas where it can be installed invisibly even in corners. • Quick and easy installation • Optimised light distribution for many different applications. • Lengths of the structures and lighting units optimised in order to reduce installation times and investment (-20 % accessories to be purchased and installed with respect to standard lengths). • All mechanical and electrical installation phases are tool free. • Easy maintenance • Sliding bracket on the structure • Quick adjuster for fast levelling • Connecting element already fitted • Through line up to 11 poles with power-supply pedestal and through plug/socket. • Dual hidden springs for support and to prevent the lamp from falling, for maximum protection against accidental falls. • Possibility of lighting units with different louvres, translucent polycarbonate diffusers and closing covers. • Lighting units with different power ratings and cable types, integrated sensors also possible.

Datasheets, product updates and specifications on our website: www.3f-filippi.com

241

3F Linux Simply modular 3F Linux S

3F Linux L

Scale 1: 1 - Dimensions in mm

The FastWiring system reduces the time necessary to create a lighting channel:

the structures, 1 Install connecting them

together with the connecting elements (pre-fitted) and connect the power-supply lines

Structure lengths optimized to reduce the number of components in long compositions.

242

Connect the powersupply plug and secure the lighting element to the structure, moving it to the required point

3F Linux 3F Linux DR

3F Linux D

Systems

Installation requires just 3 steps, with no tools needed.

Once you have chosen the required position, secure the lighting element to the structure until the retaining spring clicks

Datasheets, product updates and specifications on our website: www.3f-filippi.com

243

3F Linux Simply modular

Closing end

Structure

3F Linux S always necessary

Light unit

3F Linux L

Light unit

3F Linux D

Light unit

3F Linux DR

High closing top

Low closing top

244

3F Linux Guide to the composition of the light channels Structure length (meters) 3,56

5,33

7,11

8,89 10,67 12,45 14,22 16,00 17,78 19,56 21,34 23,11 24,89 26,67 28,45 30,23 35,56 40,89

3F Linux S 5P/7P L3556

3F Linux S 5P/7P L1778

Lighting units 3F Linux L-D-DR L1778

Pair of closing end 3F Linux Sliding bracket

1 2

5-poles socket-pin terminal block 3F Linux S 5P/7P Suspension without adjustment for 3F Linux Connection to the earth

6 1

Systems

Item

The number of sliding brackets and suspensions is calculated foreseeing 2 pieces for the first bar and 1 for the following that is composing the channel. The installer must verify if, because of existing structural constraints, the number of items should be increased.

Optional components: these components can replace (even-numbered) the standard ones, performing equivalent functions. Structure length (meters) Item

3,56

5,33

7,11

8,89 10,67 12,45 14,22 16,00 17,78 19,56 21,34 23,11 24,89 26,67 28,45 30,23 35,56 40,89

Closing Top between 3F Linux L or D L1778 Central feeding 5-poles socket-pin terminal block 3F Linux S 5P/7P

0 1

Single contact pin

Stainless steel hook for chain

S-shaped chain hook with sliding bracket 3F Linux

Note: Closing Top items is “zero” because it has the same total length of the light units (so it can replace them in equal measure).

Datasheets, product updates and specifications on our website: www.3f-filippi.com

245

New

3F Linux S Modular structural system for LED lighting modules with high efficiency and electrical line transport.

Modular and flexible structural system with small dimensions to create continuous channels and compositions, transport electrical lines and fixing of various types of products. Quick and easy ceiling or pendant installation.

Construction characteristics

On request

Applications

• structure and accessories in RAL color • through-wiring up to 11 poles

Environments: commercial, exhibition areas, transit areas, lobbies or waiting rooms, shops, schools.

Accessories Accessories on page 258.

Illuminotechnical characteristics Different lighting distributions depending by the lighting unit: L (optical lenses), D (curved diffuser), DR (Rectangular diffuser) and projectors or other types of luminaires. Mechanical characteristics Hot-galvanised wired structure, painted in polyester base white, obtained through rolling process. Saline-mist resistance equal to 500hrs and damp resistance equal to 700hrs. Linear connecting element in hot galvanized steel for the formation of continuous channels. Standard on L3556 versions (optional for other lengths). For the completion accessories, see the accessories page. Electrical characteristics Through-wiring 5 or 7 poles with cables H07Z-U Halogen Free section 2.5 mm² HT90, with quick connecting terminal start / end channel, irreversible and intermediate power sockets. 3 sockets for 3556 mm structures, 1 socket for 1778 mm structures (5P=N/T/1/2/3, 7P=N/T/1/2/3/+/-). Feeding input on top (at the beginning or in the middle of the structure).

246

Dimensions H A L

3F Linux S 3F Linux S

Linear connecting element already mounted on L3556 versions.

Item

A20018 New 3F Linux S 5P L3556 A20019

New

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

3556x62x38

3F Linux S 5P L1778

1778x62x38

A20025 New 3F Linux S 7P L3556

3556x62x38

A20026

New

3F Linux S 7P L1778

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Systems

Code

1778x62x38

247

New

3F Linux L LED light module with optical lenses for energy-efficient systems

Construction characteristics

Source characteristics

Installation

Illuminotechnical characteristics Wide direct, concentrated and dual asymmetric (BAT) distribution. Lifetime (L90/B10): 30000 h. (Tp 60°C) Lifetime (L85/B10): 50000 h. (Tp 60°C) Lifetime (L75/B10): 80000 h. (Tp 60°C) Photobiological safety RG0 unlimited, risk absent, in compliance with IEC 62471, IEC/TR 62778.

• LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3.

This lighting unit can be installed only on profile 3F Linux S (see dedicated product pages).

Mechanical characteristics Light unit in hot-galvanized steel, painted in white polyester base with fixing springs and retractable safety hooks in stainless steel. Saline-mist resistance equal to 500hrs and damp resistance equal to 700hrs. PMMA lenses with external flat surface (superimposed to obtain full protection of LED modules). Electrical characteristics Electronic wiring 230V-50/60Hz. DALI electronic wiring 230V-50/60Hz. Connection to the structure with mobile plug with phase selection (H05Z-U Halogen Free cable section 0,5mm² HT90).

Light Management

On request • different powers • LED sources with different colour temperatures • mantained emergency • integrated light sensor

Applications

Ambient temperatures up to +25°C. Environments: industrial, commercial, exhibition areas, transit areas, lobbies or waiting rooms, shops.

Dimensions

248

3F Linux L 3F Linux L Wide Code A20127

Wide distribution. Structure height (3F Linux S + 3F Linux L) equal to 67 mm.

Code

Item

Electronic A20127 New 3F Linux L 40 LED AMPIO L1778 A20126

New

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

6155

1778x62x32

3F Linux L 50 LED AMPIO L1778

7309

1778x62x32

A20125 New 3F Linux L 60 LED AMPIO L1778

8618

1778x62x32

DALI electronic A20141 New 3F Linux L 40 LED DALI AMPIO L1778

6155

1778x62x32

A20140 New 3F Linux L 50 LED DALI AMPIO L1778

7309

1778x62x32

8618

1778x62x32

A20139

New

3F Linux L 60 LED DALI AMPIO L1778

Systems

E=100%

3F Linux L BAT Code A20085

Double symmetrical distribution. Structure height (3F Linux S + 3F Linux L) equal to 67 mm.

E=100% Code

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic A20085 New 3F Linux L 40 LED BAT L1778

6142

1778x62x32

A20084 New 3F Linux L 50 LED BAT L1778

7294

1778x62x32

8600

1778x62x32

6142

1778x62x32

3F Linux L 50 LED DALI BAT L1778

7294

1778x62x32

A20097 New 3F Linux L 60 LED DALI BAT L1778

8600

1778x62x32

A20083

Item

New

3F Linux L 60 LED BAT L1778

DALI electronic A20099 New 3F Linux L 40 LED DALI BAT L1778 A20098

New

Datasheets, product updates and specifications on our website: www.3f-filippi.com

249

3F Linux L 3F Linux L Concentrated Code A20167

Wide distribution with rectangular shape. Structure height (3F Linux S + 3F Linux L) equal to 67 mm.

E=100% Code

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic A20167 New 3F Linux L 60 LED CONC L1778

8468

1778x62x32

DALI electronic A20181 New 3F Linux L 60 LED DALI CONC L1778

8468

1778x62x32

250

Item

Systems Datasheets, product updates and specifications on our website: www.3f-filippi.com

251

3F Linux L Design reference tables - Installation ACROSS aisles Design data: Maintenance factorK =

0.85

Reflection

ceiling 50% walls 50% floor 40%

Shelves

height 2.20 meters reflection 40%

Work surface height

0.85 meters

Aisle width

2 meters

Luminaire: 3F Linux L 60 AMPIO Installation spacing (meters)

Calculation surface

Installation height (meters)

Notes:

3,5

4,5

1122 570

1120 562

1100 561

1093 555

1098 559

Horizontal aisle Vertical shelf

3,5

Horizontal aisle Vertical shelf

948 480

944 481

936 476

939 480

Wide distrib.

Horizontal aisle Vertical shelf

828 420

824 420

818 416

821 418

Not recommended

4,5

Horizontal aisle Vertical shelf

735 378

730 371

731 373

Horizontal aisle Vertical shelf

659 337

656 335

5,5

Horizontal aisle Vertical shelf

602 307

Luminaire: 3F Linux L 50 AMPIO Installation spacing (meters)

Calculation surface

Installation height (meters) 3

3,5

4,5

952 483

950 477

933 476

927 471

931 474

Horizontal aisle Vertical shelf

3,5

Horizontal aisle Vertical shelf

804 407

801 408

794 404

796 407

Horizontal aisle Vertical shelf

702 356

699 356

694 353

696 355

4,5

Horizontal aisle Vertical shelf

623 321

619 315

620 316

Horizontal aisle Vertical shelf

559 286

556 284

5,5

Horizontal aisle Vertical shelf

511 260

Luminaire: 3F Linux L 40 AMPIO Installation spacing (meters)

252

The values in the tables are given in lux (lx).

Calculation surface

Installation height (meters) 3

3,5

4,5

801 407

800 401

786 401

781 396

784 399

Horizontal aisle Vertical shelf

3,5

Horizontal aisle Vertical shelf

677 343

674 344

668 340

671 343

Horizontal aisle Vertical shelf

591 300

589 300

584 297

586 299

4,5

Horizontal aisle Vertical shelf

525 270

521 265

522 266

Horizontal aisle Vertical shelf

471 241

469 239

5,5

Horizontal aisle Vertical shelf

430 219

3F Linux L Design reference tables - Installation ALONG aisles UP to 5 meters height. Design data:

Maintenance factorK =

0.85

Reflection

ceiling 50% walls 50% floor 40%

Shelves

height 2.20 meters reflection 40%

Work surface height

0.85 meters

Aisle width

2 meters

Luminaire: 3F Linux L AMPIO Calculation surface

Installation height (meters)

Notes:

3,25

3,5

3,75

60 AMPIO

Horizontal aisle Vertical shelf

1363 814

1210 746

1124 664

1040 599

992 548

50 AMPIO

Horizontal aisle Vertical shelf

1156 690

1026 633

953 563

882 508

841 465

40 AMPIO

Horizontal aisle Vertical shelf

973 581

864 533

803 474

743 428

708 391

Systems

Luminaire power

The values in the tables are given in lux (lx).

Luminaire: 3F Linux L BAT Luminaire power

Calculation surface

Installation height (meters) 3

3,25

3,5

3,75

60 BAT

Horizontal aisle Vertical shelf

1315 831

1169 806

1042 770

930 740

862 691

50 BAT

Horizontal aisle Vertical shelf

1115 705

991 684

884 653

789 628

731 586

40 BAT

Horizontal aisle Vertical shelf

939 594

835 576

744 550

664 529

616 494

Design reference tables - Installation ALONG aisles OVER 5 meters height. Design data: Reflection ceiling walls floor

Shelves height reflection

50% 50% 40%

4,5 / 5,5 / 6,5 / 7,5 meters 40%

Work surface height

0,85 meters

Aisle width

2 meters

Luminaire: 3F Linux L CONC Luminaire power

60 CONC

Calculation surface

Horizontal aisle Vertical shelf

Installation height (meters) 5

1285 413

1102 380

950 349

834 321

Datasheets, product updates and specifications on our website: www.3f-filippi.com

253

New

3F Linux D LED light module with curved diffuser for energy-efficient systems

Construction characteristics

Source characteristics

Installation

• Linear LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3.

This lighting unit can be installed only on profile 3F Linux S (see dedicated product pages).

Mechanical characteristics Light unit in hot-galvanized steel, painted in white polyester base with fixing springs and retractable safety hooks in stainless steel. Saline-mist resistance equal to 500hrs and damp resistance equal to 700hrs. Curved screen in self-extinguishing polycarbonate, UV stabilized, opal, with smooth outer surface. Electrical characteristics Electronic wiring 230V-50/60Hz. DALI electronic wiring 230V-50/60Hz. Connection to the structure with mobile plug with phase selection (H05Z-U Halogen Free cable section 0,5mm² HT90).

Light Management

On request • asymmetric lighting distribution • different powers • LED sources with different colour temperatures • mantained emergency

Applications

Ambient temperatures up to +25°C. Environments: commercial, exhibition areas, transit areas, lobbies or waiting rooms, shops, schools.

Dimensions

254

3F Linux D 3F Linux D Code A20336

Diffuse distribution. Structure height (3F Linux S + 3F Linux D) equal to 82 mm.

Code

Item

Electronic A20336 New 3F Linux D 2x22 LED L1778 A20335

New

3F Linux D 2x30 LED L1778

DALI electronic A20350 New 3F Linux D 2x22 LED DALI L1778 A20349

New

3F Linux D 2x30 LED DALI L1778

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

5859

1778x62x47

7389

1778x62x47

5859

1778x62x47

7389

1778x62x47

Systems

E=100%

255

New

3F Linux DR LED light module with a rectangular diffuser for energy-efficient systems

Construction characteristics

Source characteristics

Installation

• Linear LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3.

This lighting unit can be installed only on profile 3F Linux S (see dedicated product pages).

Mechanical characteristics Light unit in hot-galvanized steel, painted in white polyester base with fixing springs and retractable safety hooks in stainless steel. Saline-mist resistance equal to 500hrs and damp resistance equal to 700hrs. Rectangular screen in self-extinguishing polycarbonate, UV stabilized, opal, with smooth outer surface. Electrical characteristics Electronic wiring 230V-50/60Hz. DALI electronic wiring 230V-50/60Hz. Connection to the structure with mobile plug with phase selection (H05Z-U Halogen Free cable section 0,5mm² HT90).

Light Management

On request • asymmetric lighting distribution • different powers • LED sources with different colour temperatures • mantained emergency

Applications

Ambient temperatures up to +25°C. Environments: commercial, exhibition areas, transit areas, lobbies or waiting rooms, shops, schools.

Dimensions

256

3F Linux DR 3F Linux DR Code A20512

Diffuse distribution. Structure height (3F Linux S + 3F Linux DR) equal to 82 mm.

Code

Item

Electronic A20512 New 3F Linux DR 2x22 LED L1778 A20511

New

3F Linux DR 2x30 LED L1778

DALI electronic A20526 New 3F Linux DR 2x22 LED DALI L1778 A20525

New

3F Linux DR 2x30 LED DALI L1778

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

5874

1778x62x47

7407

1778x62x47

5874

1778x62x47

7407

1778x62x47

Systems

E=100%

257

3F Linux Accessories Concealed sliding bracket for free positioning, made of stainless steel. Code

Item

A20450 New

Sliding bracket with regulator for suspension installation

A20451 New

Sliding bracket for ceiling installation

In the case of purchase of only one sliding bracket with controller (code A20450), the suspension cable must be made of galvanized steel with 49 elementary wires of minimum 1.5 mm diameter (for a weight of 15 kg) and 2 mm (for a weight of 25 kg).

Concealed sliding bracket for free positioning, made of stainless steel. Code

Item

A20453 New

S-shaped chain hook with sliding bracket 3F Linux

Supplied with S-hook for galvanized steel chain.

Safety screw for locking the sliding bracket, made of hot galvanized steel. Code

Item

A20474 New

Safety screw for locking the sliding bracket

Hook to suspended luminaires to a chain. Code

Item

A20452 New

Stainless steel hook for chain

Suspensions for 3F Linux without controller, galvanized steel cable 1.5 mm diameter, load 15 kg. Code

Item

A20486 New

Suspension without adjustment for 3F Linux - 1m

A20487 New

Suspension without adjustment for 3F Linux - 2 m

A20488 New

Suspension without adjustment for 3F Linux - 3 m

A20489 New

Suspension without adjustment for 3F Linux - 4 m

A20490 New

Suspension without adjustment for 3F Linux - 5 m

A20491 New

Suspension without adjustment for 3F Linux - 6 m

258

3F Linux Accessories Caddy hook to create a point from which to suspend the system or the loads to false ceilings with visible profiles. Code

Item

A02562

Caddy for exposed profiles of 24 mm

Code

Item

A0716 New

Coil galvanized cable diam. 1.5mm - 100m

A0717 New

Coil galvanized cable diam. 1.5mm - 500m

A0718 New

Coil galvanized cable diam. 1.5mm - 1000m

Systems

Galvanized steel cable, diameter 1.5 mm, composed of 49 wires. 15kg capacity (ratio 5: 1) in conjunction with cod. A20450.

These accessories must be ALWAYS used with one of the following cod.: A20450, A20451+A20452, A0622, A0714.

Clamps in nickel-plated brass suitable for fixing and adjustment of galvanized steel wire (diameter 1.25 mm 1.5 mm - 2 mm), complete with locking screws. The clamp with 2 holes allow to fix and adjust the cable on the carrier element (belonging to the building) or with eye screw fixing. Code

Item

A0714 New

Clamp 2 holes - 100 pcs

Elements to connect in between them 3F Linux S bars. Code

Item

A20433 New

Linear connecting element for 3F Linux

A20434 New

T-Connecting element for 3F Linux

A20436 New

L-Connecting element 3F L Linux

Electric branch with plug-socket to realize L- or T-shaped connections. Code

Item

A20459 New

5-poles socket-pin branch (L-shaped) 3F Linux S

A20460 New

7-poles socket-pin branch (L-shaped) 3F Linux S

A20464 New

5-poles socket-pin branch (T-shaped) 3F Linux S

A20465 New

7-poles socket-pin branch (T-shaped) 3F Linux S

Datasheets, product updates and specifications on our website: www.3f-filippi.com

259

3F Linux Accessories Pair of closing end 3F Linux S, made of white polycarbonate. Code

Item

A20448 New

Pair of closing end 3F Linux

High closing top, made of impact-resistant white PVC. Code

Item

A20442 New

Closing Top between 3F Linux L or D - L1778

For use when installing light modules 3F Linux L, D or DR.

Low closing top, made of impact-resistant white PVC. Code

Item

A20443 New

Closing Top for luminaires - L1778

To be used with blind structures or when installing external luminaires (for example 3F Linda).

Brackets for the installation of luminaries on Linux S 3F bars (check the compatibility with our technical departments). Made of hot galvanized steel. Code

Item

A20470 New

Pair of mounting brackets 3F devices on Linux S

Terminal block plug-socket quick and irreversible graft, for electrical connection line.

260

Code

Item

A20454 New

5-poles socket-pin terminal block 3F Linux S

A20455 New

7-poles socket-pin terminal block 3F Linux S

A20500 New

Central feeding 5-poles socket-pin terminal block 3F Linux S

A20501 New

Central feeding 7-poles socket-pin terminal block 3F Linux S

3F Linux Accessories Connection to the earth, by means of galvanized M5 screw and nut, for Ø6 mm hole at the end of every structure. Code

Item

A0490

Connection to the earth

Code

Item

A20479 New

Power cable for luminaires, 3-pole

A20480 New

Power cable for luminaires, 5-pole

Systems

Power cable for luminaires not part of the 3F Linux system.

Additional contact for light unit plug. Code

Item

A20476 New

Single contact pin

Datasheets, product updates and specifications on our website: www.3f-filippi.com

261

Binario 3F Busbar Characteristics

Binario 3F is an extruded aluminium busbar housing 6 conductors (4 for three-phase mode, 2 for DALI mode): the 3 phase conductors (with common neutral) form 3 distinct circuits, allowing 3 separate on commands. The conductors are enclosed in rigid extruded profiles made from high-rigidity insulating material.

Scale: 1:1

The versatility of this product allows the creation of ceiling-mount or suspended installations (within the limit of the maximum suspendable load limit). In compliance with EN 60570.

900

450

25 kg

450

50 kg

Structural elements 2 4 7

5 1

2 8 2

2 2

2 6

1 - Power-supply cap 2 - Binario 3F busbar 3 - Linear connecting element

262

4 - Flexible connecting element 5 - Cross connector 6 - L connector

7 - T connector 8 - Central power supply 9 - Closing cap

Binario 3F Defining the earth conductor position Warning: as the track structure is asymmetrical because of the grounding element placed laterally, feeding heads and connecting joints must be chosen accordingly. In particular, this indication applies only to the following components:

Power-supply cap In the S (LH) version, the conductor is located on the left when looking at the composition from above.

Systems

In the D (RH) version, the conductor is located on the right when looking at the composition from above.

L connector In the EXT version, the conductor is located on the outside when looking at the composition from above.

In the INT version, the conductor is located on the inside when looking at the composition from above.

T connector In the EXT + D (external + RHS) version, the third conductor is located on the right when looking at the composition from above.

In the INT + D (internal + RHS) version, the third conductor is located on the right when looking at the composition from above.

In the EXT + S (external + LHS) version, the third conductor is located on the left when looking at the composition from above.

In the INT + S (internal + LHS) version, the third conductor is located on the left when looking at the composition from above.

Structure composition example - top-down view L - EXT connection

T - EXT + S connection

L - EXT connection

Datasheets, product updates and specifications on our website: www.3f-filippi.com

D power supply cap

263

New

Binario 3F Electrified track for ceiling or suspension installation

The Binario 3F is a mixed 3-phase system with two extra conductors for the management of any signal (eg DALI). The system is certified according to EN 60570 and its installation must be performed by qualified personnel. Three types of fixing: • directly on the surface (using the holes already provided in binary) • surface mounted using the metal clip • suspended by tension steel cables and various clamps and brackets without exceeding the maximum loads are planned 1-2-3-4 m length rods are supplied with copper conductors already collected as prescribed by the safety standard. In case it is necessary to shorten the length of the track in the installation phase, after cutting use a special tool (on request) taking care to engagé the 4 conductors (L1-L2-L3-N ) for at least 5 mm, so that the electrical distance and correct creepage.

Construction characteristics On request Mechanical characteristics Electrified track made from extruded aluminium, Eurostandard Plus® compliant. The wires are enclosed in rigid extruded profiles made of insulating material with high dielectric strength. Length: 1000-2000-3000-4000 mm. Available colors: white (B) and anodized aluminium (GR).

Black.

(L1/L2/L3/N/GRD/DA/DA) 16A/440V 2x1A/50V FELV AC (DALI). Copper conductors.

Dimensions H A

H L

264

Binario 3F Binario 3F

Aluminium extruded track with 6 copper conductors (L1/L2/ L3/N/GRD/DA/DA) 16A/440V.

Item

Absorbed power (W)

Sources flux (lm)

White housing A4151 New Binario 3F - L1000 - B

Dimensions LxAxH

1000x32x38

New

Binario 3F - L2000 - B

2000x32x38

A4153 New

Binario 3F - L3000 - B

3000x32x38

New

Binario 3F - L4000 - B

4000x32x38

A4152 A4154

Grey housing A4158 New Binario 3F - L1000 - GR

1000x32x38

New

Binario 3F - L2000 - GR

2000x32x38

A4160 New

Binario 3F - L3000 - GR

3000x32x38

New

Binario 3F - L4000 - GR

4000x32x38

A4159 A4161

Systems

Code

End feed

Power connection: polycarbonate body and copper alloy contacts. Warning: as the track structure is asymmetrical because of the grounding element placed laterally, feeding heads and connecting joints must be chosen accordingly.

Code

Item

Right (view from top) A4174 New Feeding head DX - B A4166

New

Feeding head DX - GR

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

95x32x38 95x32x38

Left (view from top) A4196 New feeding head SX - B

95x32x38

A4190 New

95x32x38

Feeding head SX - GR

Datasheets, product updates and specifications on our website: www.3f-filippi.com

265

Binario 3F Central electrical feeding

Central power supply with polycarbonate body and copper alloy contacts.

Code

Item

A4175 New A4167

New

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

Central feeding - B

148x32x38

Central feeding - GR

148x32x38

End cap

Polycarbonate closing cap with locking screw.

Code

Item

A4180 New A4172

266

New

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

End cap - B

32x35x38

End cap - GR

32x35x38

Binario 3F Linear junction element

Item

A4188 New A4182

New

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

Linear connecting element - B

25x115x38

Linear connecting element - GR

25x115x38

Systems

Code

Flexible connecting element

Linear connecting element with a polycarbonate body and copper alloy contacts.

Code

Item

A4176 New A4168

New

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

Flexible connecting element - B

265x32x38

Flexible connecting element - GR

265x32x38

Datasheets, product updates and specifications on our website: www.3f-filippi.com

267

Binario 3F L-junction

Warning: as the track structure is asymmetrical because of the grounding element placed laterally, feeding heads and connecting joints must be chosen accordingly. Linear connecting element with a polycarbonate body and copper alloy contacts.

Code

Item

Absorbed power (W)

Sources flux (lm)

External (view from top) A4177 New L-joint - EXT - B A4169

New

90x90x38

L-joint - EXT - GR

90x90x38

Internal (view from top) A4197 New L-joint - INT - B A4191

New

Dimensions LxAxH

90x90x38

L-joint - INT - GR

90x90x38

T-junction

Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

External (view from top) A4178 New T-joint - EXT + SX - B

148x90x38

A4198 New

T-joint - EXT + DX - B

148x90x38

New

T-joint - INT + SX - B

148x90x38

A4200 New

T-joint - INT + DX - B

148x90x38

A4199

Internal (view from top) A4170 New T-joint - EXT + SX - GR

148x90x38

A4192 New

T-joint - EXT + DX - GR

148x90x38

New

T-joint - INT + SX - GR

148x90x38

A4194 New

T-joint - INT + DX - GR

148x90x38

A4193

268

Binario 3F Cross joint

Item

A4179 New A4171

New

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

Cross joint - B

148x148x38

Cross joint - GR

148x148x38 Systems

Code

PVC closing element

PVC cover for track closing.

Code

Item

A4181 New A4173

New

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

PVC closing top - L1000 - B

1000x20x10

PVC closing top - L1000 - GR

1000x20x10

Fixing accessories

Code

Item

A4183 New

Steel bracket for ceiling mounting

A4184 New

Aluminum bracket for suspension installation

A4185

New

A4186 New A4187

New

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

Controller for suspension Rose chromed brass ceiling mounting cable Cable suspension with ball - L = 2000

Datasheets, product updates and specifications on our website: www.3f-filippi.com

269

New

3F Rocket M LED projector for accent lighting

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics Direct symmetric distribution. Lifetime (L90/B20): 30000 h. (Tp 65°C) Lifetime (L80/B20): 50000 h. (Tp 65°C) Photobiological safety RG0, risk absent, in compliance with IEC 62471.

• Compact LED module, CCT nominal color temperature 3000 K, color rendering index CRI >90. • Compact LED modules, /MEAT (version for meat) and /FRESH FOOD (version for fruit / vegetable / bread). • Color initial tolerance (MacAdam): 3. • Zhaga Book 3 compliant.

Environments: commercial, museums, shops.

Mechanical characteristics Cylindrical housing in grey RAL 9006 (GR) or white (B) painted aluminium. Parabolic louvre in polished anodised aluminium, anti-glare, non-iridescent. Passive heat dissipator in anodised aluminium, oversized, for optimum thermal management of the LED module. Upper bracket for busbar adaptor, allows angles of inclination from 0° to 90° and 330° rotation on its axis.

On request • LED module with different powers, CCT nominal color temperature 4000 K, color rendering index CRI >80 • housing in RAL colour • ceiling version • different louvres

Electrical characteristics Electronic wiring 230V-50/60Hz. In compliance with EN 60598-1. Truck adapter, 3-way. Dimensions

270

3F Rocket M 3F Rocket M Code 40911

Code

Item

Electronic 40911 New 3F Rocket M LED B 3000/930 40912

New

3F Rocket M LED GR 3000/930

Absorbed power (W)

Output flux (lm)

Dimensions ØxH

2155

120x196

2155

120x196

Systems

E=100%

3F Rocket M Meat - Fresh Code 40916

Meat - Specific source to light up meat and cold cuts. Fresh - Specific source to light up fresh products (fruits, vegetables, bread).

E=100% Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions ØxH

Electronic 40916 New 3F Rocket M LED B 2000/MEAT

29.6

1572

120x196

40917 New

3F Rocket M LED GR 2000/MEAT

29.6

1572

120x196

40921 New

3F Rocket M LED B 2000/FRESH FOOD

29.6

1520

120x196

3F Rocket M LED GR 2000/FRESH FOOD

29.6

1520

120x196

40922

New

Datasheets, product updates and specifications on our website: www.3f-filippi.com

271

New

3F Rocket L High power LED projector for accent lighting

Construction characteristics

Source characteristics

Applications

• Compact LED module, CCT nominal color temperature 3000 K, color rendering index CRI >90. • Color initial tolerance (MacAdam): 3. • Zhaga Book 3 compliant.

Environments: commercial, museums, shops.

On request • LED module with different powers, CCT nominal color temperature 4000 K, color rendering index CRI >80 • housing in RAL colour • ceiling version

Electrical characteristics Electronic wiring 230V-50/60Hz. In compliance with EN 60598-1. Truck adapter, 3-way. Dimensions

272

3F Rocket L 3F Rocket L B Code 40985

White cylindrical body.

Code

Item

Electronic 40980 New 3F Rocket L LED B 4000/930 40985

New

3F Rocket L LED B 5000/930

Absorbed power (W)

Output flux (lm)

Dimensions ØxH

3614

150x200

50.5

4272

150x200

Systems

E=100%

3F Rocket L GR Code 40984

Gray cylindrical body.

E=100% Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions ØxH

Electronic 40979 New 3F Rocket L LED GR 4000/930

3614

150x200

40984 New

50.5

4272

150x200

3F Rocket L LED GR 5000/930

Datasheets, product updates and specifications on our website: www.3f-filippi.com

273

Filigare - single luminaires Available sources: - T5 or T8 Fluorescent - LED

Standard features: - End caps - Pre-mounted T5 lamps

Accessories: - Kit to create continuous lines

3F Fil - luminaires to create continuous lighting channels Available sources: - T5 fluorescent - LED

Standard features: - Through power supply lines - Connection kit already fitted on one cap

Accessories: - End caps

New

3F Fil LED LED channel system for high energy efficiency systems and total shielding of the louvre compartment

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics Wide and medium direct symmetric lighting distribution. Lifetime (L90/B10): 30000 h. (Tp 60°C) Lifetime (L85/B10): 50000 h. (Tp 60°C) Lifetime (L75/B10): 80000 h. (Tp 60°C) Photobiological safety RG0 unlimited, risk absent, in compliance with IEC 62471, IEC/TR 62778.

• Linear LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 2.

Environments: commercial, exhibition areas, transit areas, lobbies or waiting rooms, shops, schools.

Mechanical characteristics Housing in hot-galvanised steel, painted in white polyester. Metal end caps with polycarbonate blend stop bolted on an end cap to form channels, removable blend stop at end of channel or with single luminaire. For cover elements installation, see list of accessories. Electrical characteristics Electronic wiring 230V-50/60Hz. In compliance with EN 60598-1. 2+2 in-line twin circuit wiring. N07V-K 5-pole cascade powersupply line, (L1-N1+L2-N2+E) of 2.5 mm² section, with snap-in terminal blocks, irreversible, wired to luminaire’s terminal block.

On request • different powers • asymmetric lighting distribution • housing and accessories in RAL colour • wiring: dimmable, emergency • retrofit kit for fluorescent versions • through-wiring up to 11 poles

Accessories Accessories on page 280.

Dimensions

H A

H L

276

3F Fil LED 3F Fil LED RSP Code 48019

Medium distribution. Flow recuperator in specular aluminium, high efficiency, with superficial titanium-magnesium treatment, non-iridescent. SP diffuser in self-extinguishing V2 transparent polycarbonate, photo-engraved inside, UV stabilised, injection moulded with smooth outside.

Code

Item

Through line, 5-pole - Electronic 48026 3F Fil 180 LED 2x22W RSP L1550

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

6985

1550x180x85

48017

3F Fil 180 LED 2x30W RSP L1550

8808

1550x180x85

48028

3F Fil 180 LED 2+2x22W RSP L3100

100

13971

3100x180x85

48019

3F Fil 180 LED 2+2x30W RSP L3100

136

17617

3100x180x85

Systems

E=100%

3F Fil LED RSP Wide Code 48032

Wide distribution. Flow recuperator in specular aluminium, high efficiency, with superficial titanium-magnesium treatment, non-iridescent. SP diffuser in self-extinguishing V2 transparent polycarbonate, photo-engraved inside, UV stabilised, injection moulded with smooth outside. E=100% Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Through line, 5-pole - Electronic 48030 3F Fil 180 LED 2x30W RSP AMPIO L1550

8421

1550x180x85

48032

136

16843

3100x180x85

3F Fil 180 LED 2+2x30W RSP AMPIO L3100

Datasheets, product updates and specifications on our website: www.3f-filippi.com

277

3F Fil LED 3F Fil LED 2US Code 48066

Item

Through line, 5-pole - Electronic 48060 New 3F Fil 180 LED 1x30W 2US L1550 48062

New

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

3435

1550x180x85

3F Fil 180 LED 2x30W 2US L1550

5980

1550x180x85

48064 New

3F Fil 180 LED 1+1x30W 2US L3100

6870

3100x180x85

New

3F Fil 180 LED 2+2x30W 2US L3100

136

11960

3100x180x85

48066

278

Systems

3F Fil Accessories Pair of end cap cover elements (in white polycarbonate), complete with fixing bolts.

Code

Item

A0039

Pair of white end caps Fil 180

Code

Item

A0042

Fil 180 SS (sliding bracket)

Adjustable suspension for continuous channel composed of white polycarbonate case, internal bracket in galvanized steel, cables Ø 2 mm in galvanized steel, quick adjusters, maximum load 50 Kg. Code

Item

A0045

Adjustable suspension for channel 1m

A0046

Adjustable suspension for channel 1.5m

A0047

Adjustable suspension for channel 2m

A0762

Adjustable suspension for channel 3m

A0766

Adjustable suspension for channel 4m

A0770

Adjustable suspension for channel 6m

For continuous channel it is always necessary to use the sliding bracket (cod. A0042). On request steel cable, spool of 100 or 500 m.

Adjustable suspension for individual luminaries composed of white polycarbonate rosette Ø 110 mm, internal bracket in galvanized steel, stainless steel cable 1.25 mm (length 1 m), quick adjuster, white power cable 5x1.5 mm², H05VV-F (2 m long). Code

Item

A0124

Rose 110 (Adjust. susp.1m unwired)

A0114

Rose 110 (Adjust. susp.1m wired with 5-pole cable)

Coil of stainless steel cable “Ø 1.25 mm”, length 100 m.

280

Code

Item

A0620

Spool with stainless steel cable diam. 1,25mm 100 m

3F Fil Accessories Clamps in nickel-plated brass suitable for fixing of steel wire (diameter 1.25 mm - 1.5 mm - 2 mm), complete with locking screws. Code

Item

A0622

Clamp 1 hole - 100 pcs

Terminal block (plug/socket) with irreversible snap-in double clamp, for power-supply connection at beginning and end of the channel, 5 poles. Item

A02484

5P socket/plug terminal block Beginning/End Channel Systems

Code

Branch with 5-pole line, 50 cm long, to be used if line is powered along the channel or by means of a box for branch joints (cod. 0036 - 0037). Code

Item

A02597

Branch 50cm, plug-socket 5P

Boss with Rose 86 for power-supply connection, in white polycarbonate, white linear power-supply cable, type H05VV-F 5x1.5 mm², length 2 m. Code

Item

A0128

Rose 86 (5-pole wired boss)

Datasheets, product updates and specifications on our website: www.3f-filippi.com

281

News and updates available on: www.3f-filippi.com > Products > Waterproof and corrosion-proof

Waterproof and corrosion-proof Page

Source

Steel

Aluminum

Stainless steel

Polycarbonate

3F Lem

290

New 3F LEM

LED

•

294

New 3F LEM HO

LED

•

298

New 3F LEM Sensor

LED

•

300

New 3F LEM HT

LED

•

304

3F Linda

306

3F Linda LED

314

New 3F Linda LED Opal

LED

•

LED

•

316

3F Linda LED Transparent

LED

•

318

3F Linda LED Ice

LED

•

320

3F Linda LED Sensor

LED

•

322

3F Linda Fluo

Fluo

•

330

3F Linda Fluo Transparent

Fluo

•

338

Beta A3F - i3F

338

Beta i3F 75-76 LED

LED

342

Beta A3F 90-91 LED

LED

•

346

Beta Ice LED

LED

•

349

Beta Kit LED Retrofit

LED

•

354

Beta i3F 75-76 Fluo

Fluo

•

360

Beta A3F 90-91 Fluo

Fluo

366

Beta A3F 92-93 Fluo

Fluo

370

Beta 430

370

Beta 430 LED

LED

•

372

Beta 430 Fluo

Fluo

•

378

3F Cub

380

3F Cub LED

LED

•

386

3F Cub Fluo

Fluo

•

Waterproof and corrosion-proof

284

Product

• • •

283

3F LEM

3F LEM is a highly specialised product, designed to satisfy customers who need to light large areas evenly. We have designed and manufactured it with large injection-moulded shielding which permits different photometric distributions and lighting modules in aluminium alloy which are able to optimally dissipate the heat generated by the latest LED sources.

3F LEM - Light Emitting Modules A new way of thinking about light

The design of the new 3F LEM is based on simplification and modularity of design: common platforms and structures create advantages for the customer in terms of the use, during installation and even when changing the sources at the end of the product life cycle.

The photo shows: 3F LEM 4 LED 200 AMPIO - code 55933

284

Waterproof and corrosion-proof

3F LEM

Design Patented

Datasheets, product updates and specifications on our website: www.3f-filippi.com

285

286

3F LEM Passion, experience and expertise 3F Filippi is an Emilia-Romagna-based company, and we shares the region’s passion for mechanics and engines in our culture and expertise. It is for precisely this reason that when creating the 3F LEM heatsink module we consulted the foremost authority in the field, the mechanical engineering department at the University of Bologna. Their precious support and expertise led to the creation of the heart of the 3F LEM, the heatsink, or dissipator, module. This is the common denominator across all modules in the product family, and the performance of LEDs depends in large part on their ability to dissipate the heat they generate. Our goal was to create a product which could be installed in high-temperature environments and which would be able to make the sources work correctly. The result is a body made from an innovative pressure die-cast body, which can be installed in environments with temperatures up to 70°C. Heat dissipation is not the only innovation on 3F LEM:

Wiring compartment separate from heat dissipators Thanks to this design, the power supplies are not affected by the heat emitted by the modules. This solution also allows wiring compartments of different lengths to be created.

Upgradability Shielding, sources and power supplies can be replaced at the end of their life cycle, or upgraded to next-generation sources. Waterproof and corrosion-proof

Air passage 3F LEM has been designed to have the best possible air passage in all installation conditions, including ceiling mounted. Aerodynamic analysis has allowed dust deposits on the heat dissipators to be avoided.

Design Patented

Mid-Power LED Use of these LEDs offers improved efficiency (compared to High Power LEDs), less glare and optimised heat distribution (less thermal stress on the sources).

LED photobiological safety: RG0 The LEDs used are RG0 class (photobiological risk absent), that is they do not emit any radiation harmful to human organs.

Datasheets, product updates and specifications on our website: www.3f-filippi.com

3F Lens lenticular lens Available with Wide or Concentrated controlled output (UGR < 22).

287

3F LEM Light which fills space

When we began thinking about 3F LEM, we wanted to place renewed focus on the way large spaces have been illuminated up to now: we perceive the world through our senses, and light is a tool which lets us do so. Objects and other people only exist for us if we can see them, and as a result it is precisely thanks to light that we are able to correctly perceive shapes, colours and the messages we receive from the world every minute of the day. Working in conditions with low or poor-quality lighting has direct and indirect negative effects which influence the way workers perform their work.

For this reason, 3F LEM is equipped with the highest quality LED sources with a CRI>80, but on request can be fitted with sources with CRI>90. It is also possible to obtain light with a colour temperature of 4000K (neutral white), 6500K (cold white) and, on request, 3000K (warm white). With a UGR value of <22, we respect the vision of those who work under 3F LEM lights, as well as respecting health by ensuring all luminaires are RG0 class (photobiological risk absent).

288

3F LEM 3F LEM fully complies with all applicable illuminotechnical standards and legislation: its lighting distribution comes from careful analysis of BS EN 12464-1 which covers lighting of indoor work environments. We have paid great attention to the requirements of the market and believe that the two different distributions are capable of satisfying even the most demanding customers:

WIDE DISTRIBUTION Recommended for industry Rectangular ground projection

As there is no photometric overlap, the energy used and number of luminaires is optimised.

Waterproof and corrosion-proof

Uniformity To obtain uniform lighting, the installation pitch is equal to: DT = 1,5 x hu

DL = 1,4 x hu

hu = Effective installation height

CONCENTRATED DISTRIBUTION Recommended for warehouses with large installation heights Elliptical ground projection

DL Allows large longitudinal pitch to obtain uniformity over the aisles and shelving.

Uniformity To obtain uniform lighting, the installation pitch is equal to: DL = 1,30 x hu hu = Effective installation height

Datasheets, product updates and specifications on our website: www.3f-filippi.com

289

New

3F LEM High bay LED luminaire for hot environments in high energy efficiency systems

Construction characteristics

On request

Applications

Illuminotechnical characteristics Wide and elliptically concentrated distribution. Lifetime (L95/B10): 30000 h. (Tp 60°C) Lifetime (L90/B10): 50000 h. (Tp 60°C) Lifetime (L80/B10): 80000 h. (Tp 60°C) Photobiological safety RG0, risk absent, in compliance with IEC 62471.

• versions with more than 4 lighting modules • double quick connection with socket/plug • polycarbonate lenses (IK08) • wiring: twin-circuit, emergency • wall fixing brackets (available fixed or adjustable) • protective casing against the deposit of dust and bacteria (dedicated to the food industry) • luminaire 90° rotation bracket (in the horizontal plane) • tempered glass cover for cleaning • specific version for use in gyms

Ambient temperature from -30°C to +55°C. Dry, dusty indoor environments, subject to occasional water splashes. Environments: commercial, industrial, sports, stores, sports halls, gymnasiums. Environments in which it is necessary a total protection against falling fragments (eg environments with foodstuffs or machines with moving parts or with extreme temperature changes), use luminaires with polycarbonate lenses.

Accessories

Mechanical characteristics Passive modular heatsinks in die-casted aluminum, painted in white color. To optimize the thermal management of the LED module, the heatsinks are oversized and provided with self-cleaning of cooling fins. Wiring body in aluminum and steel anchored solidly to the sinks and thermally separated. 3F Lens lenses with high luminous efficiency, transparent PMMA, fixed to the LED modules. Fixing brackets in stainless steel. Electrical characteristics Electronic wiring 230V-50/60Hz. DALI electronic wiring 230V-50/60Hz. Quick connection with plug connector at one end cap and plug supplied. Power unit positioned on a separate compartment by the LED module to ensure optimum temperatures of cabling components, to be inspectable and maintainable.

Accessories on page 303.

Light Management

Dimensions L

Source characteristics

H A

• Linear LED modules, CCT nominal color temperature 4000 K or 6500 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3.

290

L H

3F LEM 3F LEM Wide Code 55932

Wide distribution with rectangular shape. Light sources with a color temperature of 4000 K.

E=100% Code

Item

Electronic 55931 New 3F LEM 2 LED 100 AMPIO

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

116

15849

470x542x129

3F LEM 3 LED 150 AMPIO

174

23774

562x542x129

55933 New

3F LEM 4 LED 200 AMPIO

232

31699

757x542x129

55932

Waterproof and corrosion-proof

New

3F LEM Concentrated Code 55938

Distribution concentrated elliptical. Light sources with a color temperature of 4000 K.

E=100% Code

Item

Electronic 55938 New 3F LEM 3 LED 150 CONC 55939

New

3F LEM 4 LED 200 CONC

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

174

24336

562x542x129

232

32448

757x542x129

291

3F LEM 3F LEM Wide /865 Code 56004

Wide distribution with rectangular shape. Light sources with a color temperature of 6500 K.

E=100% Code

Item

Electronic 56003 New 3F LEM 2 LED 100/865 AMPIO

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

116

16007

470x542x129

New

3F LEM 3 LED 150/865 AMPIO

174

24012

562x542x129

56005 New

3F LEM 4 LED 200/865 AMPIO

232

31986

757x542x129

56004

3F LEM Concentrated /865 Code 56010

Distribution concentrated elliptical. Light sources with a color temperature of 6500 K.

E=100% Code

Item

Electronic 56010 New 3F LEM 3 LED 150/865 CONC 56011

292

New

3F LEM 4 LED 200/865 CONC

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

174

24579

562x542x129

232

32772

757x542x129

3F LEM 3F LEM DALI Wide Code 55944

Wide distribution with rectangular shape. Light sources with a color temperature of 4000 K. DALI electronic wiring 230V-50/60Hz.

E=100% Code

Item

DALI electronic 55943 New 3F LEM 2 LED 100 DALI AMPIO

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

116

15849

470x542x129

3F LEM 3 LED 150 DALI AMPIO

174

23774

562x542x129

55945 New

3F LEM 4 LED 200 DALI AMPIO

232

31699

757x542x129

55944

Waterproof and corrosion-proof

New

3F LEM DALI Concentrated Code 55950

Distribution concentrated elliptical. Light sources with a color temperature of 4000 K. DALI electronic wiring 230V-50/60Hz.

E=100% Code

Item

DALI electronic 55950 New 3F LEM 3 LED 150 DALI CONC 55951

New

3F LEM 4 LED 200 DALI CONC

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

174

24336

562x542x129

232

32448

757x542x129

293

New

3F LEM HO High bay LED luminaire for high energy efficiency systems

Construction characteristics

On request

Applications

Illuminotechnical characteristics Wide and elliptically concentrated distribution. Lifetime (L90/B10): 30000 h. (Tp 60°C) Lifetime (L85/B10): 50000 h. (Tp 60°C) Lifetime (L75/B10): 80000 h. (Tp 60°C) Photobiological safety RG0, risk absent, in compliance with IEC 62471.

• versions with more than 4 lighting modules • double quick connection with socket/plug • LED modules, CCT nominal color temperature 6500 K • polycarbonate lenses (IK08) • wiring: twin-circuit, emergency • wall fixing brackets (available fixed or adjustable) • protective casing against the deposit of dust and bacteria (dedicated to the food industry) • luminaire 90° rotation bracket (in the horizontal plane) • tempered glass cover for cleaning

Ambient temperature from -30°C to +45°C. Dry, dusty indoor environments, subject to occasional water splashes. Environments: commercial, industrial, sports, stores, sports halls, gymnasiums. Environments in which it is necessary a total protection against falling fragments (eg environments with foodstuffs or machines with moving parts or with extreme temperature changes), use luminaires with polycarbonate lenses.

Mechanical characteristics Passive modular heatsinks in die-casted aluminum, painted in white color. To optimize the thermal management of the LED module, the heatsinks are oversized and provided with self-cleaning of cooling fins. Wiring body in aluminum and steel anchored solidly to the sinks and thermally separated. 3F Lens lenses with high luminous efficiency, transparent PMMA, fixed to the LED modules. Fixing brackets in stainless steel. Electrical characteristics Electronic wiring 230V-50/60Hz. Quick connection with plug connector at one end cap and plug supplied. Power unit positioned on a separate compartment by the LED module to ensure optimum temperatures of cabling components, to be inspectable and maintainable.

Accessories Accessories on page 303.

Dimensions L H

Source characteristics

A L

• Linear LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3.

294

L H

3F LEM HO 3F LEM HO Wide Code 56584

Wide distribution with rectangular shape.

E=100% Code

Item

Electronic 56583 New 3F LEM 2 HO LED 140 AMPIO

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

154

19557

470x542x129

3F LEM 3 HO LED 210 AMPIO

231

29335

562x542x129

56585 New

3F LEM 4 HO LED 280 AMPIO

308

39113

757x542x129

56584

Waterproof and corrosion-proof

New

3F LEM HO Concentrated Code 56590

Distribution concentrated elliptical.

E=100% Code

Item

Electronic 56589 New 3F LEM 2 HO LED 140 CONC 56590

New

3F LEM 3 HO LED 210 CONC

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

154

20019

470x542x129

231

30028

562x542x129

295

3F LEM HO 3F LEM HO DALI Wide Code 56596

Wide distribution with rectangular shape. DALI electronic wiring 230V-50/60Hz.

E=100% Code

Item

DALI electronic 56595 New 3F LEM 2 HO LED 140 DALI AMPIO

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

154

19557

470x542x129

New

3F LEM 3 HO LED 210 DALI AMPIO

231

29335

562x542x129

56597 New

3F LEM 4 HO LED 280 DALI AMPIO

308

39113

757x542x129

56596

3F LEM HO DALI Concentrated Code 56602

Distribution concentrated elliptical. DALI electronic wiring 230V-50/60Hz.

E=100% Code

Item

DALI electronic 56601 New 3F LEM 2 HO LED 140 DALI CONC 56602

296

New

3F LEM 3 HO LED 210 DALI CONC

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

154

20019

470x542x129

231

30028

562x542x129

Waterproof and corrosion-proof

New

3F LEM Sensor High bay LED luminaire with for light sensor for environments in high energy efficiency systems

Construction characteristics

Source characteristics

Accessories

• Linear LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3.

Accessories on page 303.

On request

Ambient temperature from -25°C to +50°C. Recommended in environments with strong amount of natural light (or areas with staff present discontinuously). Dry, dusty indoor environments, subject to occasional water splashes. Environments: commercial, industrial, sports, stores, sports halls, gymnasiums. Environments in which it is necessary a total protection against falling fragments (eg environments with foodstuffs or machines with moving parts or with extreme temperature changes), use luminaires with polycarbonate lenses.

Mechanical characteristics Passive modular heatsinks in die-casted aluminum, painted in white color. To optimize the thermal management of the LED module, the heatsinks are oversized and provided with self-cleaning of cooling fins. Wiring body in aluminum and steel anchored solidly to the sinks and thermally separated. 3F Lens lenses with high luminous efficiency, transparent PMMA, fixed to the LED modules. Fixing brackets in stainless steel. Electrical characteristics DALI electronic wiring 230V-50/60Hz. Quick connection with plug connector at one end cap and plug supplied. Power unit positioned on a separate compartment by the LED module to ensure optimum temperatures of cabling components, to be inspectable and maintainable. Integrated DALI light sensor on the luminaire, able to maintain a constant level of illumination as a function of the natural light.

298

• presence function • manual light intensity adjustment • versions with more than 4 lighting modules • double quick connection with socket/plug • LED modules, CCT nominal color temperature 6500 K • polycarbonate lenses (IK08) • wiring: twin-circuit, emergency • wall fixing brackets (available fixed or adjustable) • protective casing against the deposit of dust and bacteria (dedicated to the food industry) • luminaire 90° rotation bracket (in the horizontal plane) • tempered glass cover for cleaning

Applications

Dimensions

H A L H

3F LEM Sensor 3F LEM Sensor Wide Code 56076

Wide distribution with rectangular shape. Integrated DALI light sensor on the luminaire, able to maintain a constant level of illumination as a function of the natural light.

E=100% Code

Item

DALI electronic 56076 New 3F LEM 3 LED 150 DALI Sensor AMPIO 56077

New

3F LEM 4 LED 200 DALI Sensor AMPIO

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

174

23774

692x542x129

232

31699

887x542x129

Waterproof and corrosion-proof

3F LEM Sensor Concentrated Code 56082

Distribution concentrated elliptical. Integrated DALI light sensor on the luminaire, able to maintain a constant level of illumination as a function of the natural light.

E=100% Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

DALI electronic 56082 New 3F LEM 3 LED 150 DALI Sensor CONC

174

24336

692x542x129

56083 New

232

32448

887x542x129

3F LEM 4 LED 200 DALI Sensor CONC

Datasheets, product updates and specifications on our website: www.3f-filippi.com

299

New

3F LEM HT High bay LED luminaire for hot environments in high energy efficiency systems

Construction characteristics

Source characteristics

Accessories

• Linear LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3.

Accessories on page 303.

On request

Ambient temperature from -30°C to +70°C. Dry, dusty indoor environments, subject to occasional water splashes. Environments: industrial, sports, stores, sports halls, gymnasiums. Environments in which it is necessary a total protection against falling fragments (eg environments with foodstuffs or machines with moving parts or with extreme temperature changes), use luminaires with polycarbonate lenses.

Mechanical characteristics Passive modular heatsinks in die-casted aluminum, painted in white color. To optimize the thermal management of the LED module, the heatsinks are oversized and provided with self-cleaning of cooling fins. Wiring body in aluminum and steel anchored solidly to the sinks and thermally separated. 3F Lens lenses with high luminous efficiency, transparent PMMA, fixed to the LED modules. Fixing brackets in stainless steel. Electrical characteristics Electronic wiring 230V-50/60Hz. Quick connection with plug connector at one end cap and plug supplied. Power unit positioned on a separate compartment by the LED module to ensure optimum temperatures of cabling components, to be inspectable and maintainable.

• versions with more than 4 lighting modules • double quick connection with socket/plug • LED modules, CCT nominal color temperature 6500 K • polycarbonate lenses (IK08) • wiring: twin-circuit, dimmable, emergency • wall fixing brackets (available fixed or adjustable) • protective casing against the deposit of dust and bacteria (dedicated to the food industry) • luminaire 90° rotation bracket (in the horizontal plane) • tempered glass cover for cleaning

Applications

Dimensions L H A L

L H

300

3F LEM HT 3F LEM HT Wide Code 56124

Wide distribution with rectangular shape.

E=100% Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

10144

470x542x129

3F LEM 3 HT LED 90 AMPIO

108

15215

562x542x129

3F LEM 4 HT LED 120 AMPIO

144

20287

757x542x129

56124

New

56125 New

Waterproof and corrosion-proof

Electronic 56123 New 3F LEM 2 HT LED 60 AMPIO

3F LEM HT Concentrated Code 56130

Distribution concentrated elliptical.

E=100% Code

Item

Electronic 56130 New 3F LEM 3 HT LED 90 CONC 56131

New

3F LEM 4 HT LED 120 CONC

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

108

15575

562x542x129

144

20767

757x542x129

301

3F LEM Examples of design Comparison to 400W JM reflector Design data: Room dimensions Room height Installation height

50x50 meters 11 meters 10 meters

Like-for-like replacement of light points Reflection

ceiling 30% walls 30% floor 10%

Work surface height

0.85 meters

Lighting values

Current installation 400 JM reflector

Like-for-like replacement of light points 3F LEM 2 HO LED 140 AMPIO

Reduction in light points 3F LEM 4 HO LED 280 AMPIO

290 lx

309 lx

310 lx

Number of light points Total power

21.560 W

7.546 W

7.700 W

-65%

-64%

>50.000 hours

Current installation 250 JM reflector

Like-for-like replacement of light points 3F LEM 2 LED 100 AMPIO

Reduction in light points 3F LEM 2 LED 100 AMPIO

174 lx

263 lx

226 lx

Difference Average source lifetime

8.000 hours

Comparison to 250W JM reflector Design data: Room dimensions Room height Installation height

50x50 meters 8 meters 7 meters

Like-for-like replacement of light points Reflection

ceiling 30% walls 30% floor 10%

Work surface height

0.85 meters

Lighting values Number of light points Total power

14.210 W

5.684 W

4.872 W

-60%

-66%

8.000 hours

>50.000 hours

Difference Average source lifetime

302

3F LEM Accessories Brackets to instal the product on the ceiling or on busbar. Code

Item

A0652 New

Couple of brackets for ceiling installation - 3F LEM

Carabiners to fix the product to a chain. Item

A0653 New

Couple of fixing carabiniers for chain installation - 3F LEM

Waterproof and corrosion-proof

Code

Datasheets, product updates and specifications on our website: www.3f-filippi.com

303

3F Linda

even cleaner, more compact and solid...

3F Linda has become famous for its soft and smooth lines, its patented snug fit snap-lock clips, its compact egg-shaped housing (110 millimetres maximum in the case of ceiling installation with brackets), its internal reinforcement structure and its elastic, shatterproof polycarbonate diffuser. Thanks to its flexibility, it finds applications in residential, commercial and even food industry environments (IFS, HACCP and BRC certification). 3F Linda is available in four different lengths (300, 600, 1200 and 1500 mm) with different power and luminous flux levels, and with both housing widths (100 millimetres and 160 millimetres). The Fluorescent versions are available with efficient electronic wiring which reduces power consumption and on times. Thanks to the new diffuser, photo etched on the inside, 3F Linda is now even more economical and high-performance: better diffusion of the light, increased comfort and softer vision.

3F Linda Range LED versions

Fluorescent versions: 3F Linda LED 3F Linda LED Opale 3F Linda LED Trasparente 3F Linda LED Ice 3F Linda LED Sensor 3F Linda LED Basic 3F Linda HS

3F Linda Fluo 3F Linda Fluo Trasparente

3F Linda 100 mm

3F Linda 160 mm

304

3F Linda

...ecological and efficient.

Patented The new 3F Linda is the best representation of 3F Filippi’s design philosophy: look for the best manufacturing solutions which respect the environment and bring reductions in consumption of materials and energy across the whole product life cycle, via:

Waterproof and corrosion-proof

Reduction of power consumption and increase in efficiency of our products thanks to the introduction of intelligent electronic wiring, high-efficiency sources and optimisation of the distribution of the luminous flux, thanks also to the possibility of installing flow recuperators.

Limited use of different materials, facilitating assembly, installation and recycling: 3F Linda contains only polycarbonate (housing, diffuser and clips), aluminium or steel (flow recuperator, gear tray and stainless-steel clips) and the copper in the wires (completely removable). Moreover, connection between components are all reversible and use completely recyclable materials, facilitating disassembly and disposal of the product at the end of its lifetime. Recyclable green packaging, like all of 3F Filippi’s products, in recycled cardboard. Reduced ecological footprint, with products manufactured with energy from PV solar panels and product handling following a “zeromile” philosophy. Installation compatibility with previous versions: the new 3F Linda integrates perfectly in all environments, becoming the perfect solution to update existing installations – thanks to its full compatibility with the previous fluorescent version in terms of its size and accessories. Reuse of these elements means that less energy is used to create new products and accessories for adaption of previous installations.

Quick, safe installation thanks to the fixing brackets which are completely in metal (both the internal and external part), the weight is optimally distributed. The sliding quick connection bracket can also be adjusted to suit the thermal expansion of the luminaire even in environments with a notable temperature range. The set of three fixing brackets is supplied with each luminaire.

Datasheets, product updates and specifications on our website: www.3f-filippi.com

305

3F Linda LED Watertight luminaire for high energy efficiency systems

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics Controlled symmetric distribution. Lifetime (L90/B10): 30000 h. (Tp 60°C) Lifetime (L85/B10): 50000 h. (Tp 60°C) Lifetime (L75/B10): 80000 h. (Tp 60°C) Photobiological safety RG0 unlimited, risk absent, in compliance with IEC 62471, IEC/TR 62778.

• Linear LED modules, CCT nominal color temperature 3000 K, 4000 K or 6500 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3.

Dry, dusty indoor environments, subject to occasional water splashes. Virtually in all environments compatibly with the use of any chemicals which could compromise the use of plastic materials. Not suitable in environments where chlorine fumes, ligroin, hydrocarbon mixtures, mineral oil vapours or fumes of lubricating emulsions to cool down machine tools are present. Not suitable for installation on surfaces subject to important vibrations, exposed to weather conditions, on ropes or poles. For specific applications please contact our technical offices. Wide version Environments with low ceilings, parking lots or wide installation grids. HS version Product suitable for installation in foodproduction/processing environments (HACCP, IFS, BRC Standard).

Mechanical characteristics Self-extinguishing V2 polycarbonate housing, injection moulded, RAL 7035 grey. Ecologic anti-aging injected sealing gasket. Gear-tray reflector unit in hot-galvanised steel, painted in white polyester, fixed to the housing by means of steel rapid devices, hinged opening. Diffuser in self-extinguishing V2 polycarbonate, photo-engraved interior, UV stabilised, injection moulded with smooth outer surface. Stainless steel fixing brackets, L=300 mm versions excluded.

On request • LED sources with different colour temperatures • wiring: dimmable, class II

Accessories Accessories on page 334.

Dimensions Electrical characteristics Electronic wiring 230V-50/60Hz. EP maintained emergency wiring, 1hr duration with 24hrs recharge, fuse. In compliance with EN 60598-2-22.

A H

306

3F Linda LED 3F Linda LED Code 58616

Snug fit snap-lock clips in stainless steel. Fixing brackets in stainless steel.

Code

Item

Colour temperature 4000K - Electronic 58563 New 3F Linda LED 1x6W L660

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

7.5

1004

660x160x100

58561

3F Linda LED 1x12W L660

14.5

1870

660x100x100

58583

3F Linda LED 1x24W L1270

3736

1270x100x100

58605

3F Linda LED 1x30W L1570

4672

1570x100x100

58594

3F Linda LED 2x24W L1270

7282

1270x160x100

58616

3F Linda LED 2x30W L1570

9098

1570x160x100

6918

1270x160x100

3F Linda LED 2x30W/830 L1570

8644

1570x160x100

Colour temperature 6500K - Electronic 58595 3F Linda LED 2x24W/865 L1270

7355

1270x160x100

58617

9199

1570x160x100

Colour temperature 3000K - Electronic 58596 New 3F Linda LED 2x24W/830 L1270 58618

New

3F Linda LED 2x30W/865 L1570

Colour temperature 4000K - EP emergency, fuse 58569 New 3F Linda LED 1x6W EP LA L660

7.5

1004

660x160x100

58567

3F Linda LED 1x12W EP LA L660

14.5

1870

660x160x100

58589

3F Linda LED 1x24W EP L1270

3736

1270x100x100

58611

3F Linda LED 1x30W EP L1570

4672

1570x100x100

58600

3F Linda LED 2x24W EP L1270

7282

1270x160x100

58623

3F Linda LED 2x30W EP L1570

9098

1570x160x100

6918

1270x160x100

8644

1570x160x100

Colour temperature 3000K - EP emergency, fuse 58602 New 3F Linda LED 2x24W/830 EP L1270 58625

New

3F Linda LED 2x30W/830 EP L1570

Colour temperature 6500K - EP emergency, fuse 58601 3F Linda LED 2x24W/865 EP L1270

7355

1270x160x100

58624

9199

1570x160x100

3F Linda LED 2x30W/865 EP L1570

Colour temperature 4000K - ENP emergency, fuse 58713 3F Linda LED 1x24W ENP L1270

530

1270x100x100

58705

533

660x160x100

3F Linda LED 1x12W ENP LA L660

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Waterproof and corrosion-proof

E=100%

307

3F Linda LED 3F Linda LED Compact Code 5791

E=100%

Code

Item

Wide longitudinal distribution. Adjustable LED modules. Photobiological safety RG0, risk absent, in compliance with IEC 62471. In compliance with EN 60598-1. Snug fit snap-lock clips for diffuser mounting, in stainless steel.

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 5791 3F Linda Compatta LED 1x5W 160x300

7.5

477

300x160x100

5790

7.5

481

300x100x100

3F Linda Compatta LED 1x5W 100x300

The Linda LED family is enhanced with this new Compact version, specially designed to be installed in corridors, emergency exits and transit areas: its light guides you along very clearly with its distribution which has been optimised to create light corridors. Thanks to a new type of LED specially designed for this device, consistent energy savings can be achieved and maintenance costs eliminated (average estimated LED source lifetime 80,000 h). Both Linda Compact LED versions can be wall or ceiling mounted, and offer the possibility to direct the LED source, easily adapting the light strip to any type of installation The rotating support the LED is fixed to allows the light flow to be oriented up to 45° in both directions, meeting any dedicated lighting requirements and allowing these adjustments to be made with great precision directly on site:

Symmetrical luminous flux

308

Example of source orientation

Example: Asymmetric light flow oriented at 45°

3F Linda LED 3F Linda LED Wide Code 58661

Wide distribution. Flux recuperator in specular aluminium, high efficiency. Snug fit snap-lock clips for diffuser mounting, in stainless steel, tamper-proof screwdriver opening. E=100% Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 58659 3F Linda LED 2x24W AMPIO L1270

7259

1270x160x100

58661

9072

1570x160x100

3F Linda LED 2x30W AMPIO L1570

Waterproof and corrosion-proof

Code

3F Linda LED Concentrated Code 58632

Concentrated distribution. Flux recuperator in specular aluminium, high efficiency. Snug fit snap-lock clips for diffuser mounting, in stainless steel, tamper-proof screwdriver opening. E=100% Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 58630 3F Linda LED 2x24W CONC L1270

7134

1270x160x100

58632

8918

1570x160x100

3F Linda LED 2x30W CONC L1570

Datasheets, product updates and specifications on our website: www.3f-filippi.com

309

3F Linda LED 3F Linda LED Basic Code 58765

E=100% Code

Item

Electronic 58762 New 3F Linda LED Basic 1x19W L1270

Photobiological safety RG0, risk absent, in compliance with IEC 62471. Snug fit snap-lock clips for diffuser mounting, in polycarbonate, tamper-proof screwdriver opening. In compliance with EN 60598-1.

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

2724

1270x100x100

New

3F Linda LED Basic 1x23W L1570

3403

1570x100x100

58763 New

3F Linda LED Basic 2x19W L1270

5304

1270x100x160

New

3F Linda LED Basic 2x23W L1570

6627

1570x100x160

58764 58765

3F Linda LED HS Code 58730

E=100%

Code

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 58724 3F Linda LED HS 1x30W L1570

4672

1570x100x100

58730

9098

1570x160x100

310

Item

Body and screen in polycarbonate with additional protective treatment for use in environments with aggressive substances. Snug fit snap-lock clips for diffuser mounting, in stainless steel, tamper-proof screwdriver opening. In compliance with EN 60598-1.

3F Linda LED HS 2x30W L1570

Waterproof and corrosion-proof

3F Linda LED Examples of design Comparison with waterproof Fluorescent 2x58 Starter Design data: Room dimensions Room height Installation height

30x30 metres 7 metres 5 metres

Number of luminaires:

60 luminaires

Like-for-like replacement of light points Reflection

ceiling 30% walls 30% floor 10%

Work surface height

0.85 metres

Current installation Waterproof Fluorescent 2x58W

Like-for-like replacement of light points 3F Linda LED Basic 2x23W L1570

Reduction in light points 3F Linda LED 2x30W L1570

300 lx

334 lx

311 lx

8.460 W (starter) 6.600 W (electronic)

3.120 W

2.856 W

-63% (starter) -53% (electronic)

-66% (starter) -53% (electronic)

>50.000 hours

Lighting values Number of light points Total power Difference Average source lifetime

10.000 hours (starter) 18.000 hours (electronic)

2000 hours annual operation (8 hours per day) Energy costs

51€ (starter) 40€ (electronic)

Energy savings per luminaire currently installed

19€ 32€* (starter) 21€* (electronic)

34€* (starter) 23€* (electronic)

3000 hours annual operation (12 hours per day) Energy costs Energy savings per luminaire currently installed

76€ (starter) 59€ (elettronico)

28€ 48€* (starter) 31€* (electronic)

50€* (starter) 33€* (electronic)

*Savings from the drastic reduction in maintenance costs should then be added to this!

312

3F Linda LED Comparison table between fluorescent and LED luminaires T8

2x58W 2x36W 2x18W 1x58W 1x36W 1x18W

Consumption (W)

starter

141

109

starter

Corresponding LED 3F Linda LED Basic 2x23W L1570

Consumption (W)

Savings

63% 52%

3F Linda LED Basic 2x19W L1270

53% 41%

3F Linda LED 1x12W L660

14,5

68% 59%

3F Linda LED Basic 1x23W L1570

63%

3F Linda LED Basic 1x19W L1270

53%

3F Linda LED 1x6W L660

7,5

72%

53% 42% 61%

2x49W

106

3F Linda LED Basic 2x23W L1570

51%

2x35W

3F Linda LED 1x30W L1570

55%

2x28W

3F Linda LED 1x24W L1270

53%

2x14W

3F Linda LED 1x12W L660

14,5

53%

1x80W

3F Linda LED 1x30W L1570

60%

1x49W

3F Linda LED Basic 1x23W L1570

51%

1x35W

3F Linda LED BAsic 1x19W L1270

45%

1x28W

3F Linda LED 1x12W L1270

14,5

53%

1x14W

3F Linda LED 1x6W L660

7,5

53%

Waterproof and corrosion-proof

Fluorescent Version

Why choose 3F Linda LED? Never-ending light 3F Linda LED is equipped with new 3F LED technology whose sources specially developed for demanding applications guarantee an operating lifetime of over 50,000 hours, at the end of which at least 90% of the LED will still be providing 85% of their initial light output! (50,000h L85/B10).

You won’t believe your wallet! - 3F LED technology allows you to save up to 60% compared to traditional sources. - Existing luminaires can be replaced while maintaining the same light locations and wiring system, but reducing energy consumption. - Reduced maintenance significantly lowers running costs.

Beauty which doesn’t blind! The new 3F Linda LED photo-etched diffuser cancels out all glare to provide truly enviable lighting uniformity. What’s more, its clean, elegant lines make 3F Linda LED a luminaire which can fit in perfectly with any environment.

Eco-logical 3F Linda LED has been created according to the principles of Eco Design, and stands out for: - Manufactured using energy from solar panels and assembled according to our “zero mileage” philosophy - Limited use of different materials, facilitating assembly, installation and recycling - Recyclable green packaging

Significant reduction in maintenance costs Longer life means less maintenance. Less maintenance means greater savings. Less maintenance means fewer problems. Fewer problems means greater peace of mind. Datasheets, product updates and specifications on our website: www.3f-filippi.com

313

New

3F Linda LED Opal Waterproof luminaire with high visual comfort for energy-efficient systems

Construction characteristics

Source characteristics

Applications

• Linear LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3.

Dry, dusty indoor environments, subject to occasional water splashes. Environments: hospital premises, transit areas, large mirrors, stairwells. Environments where soft diffuse light is required for optimal visual comfort. Virtually in all environments compatibly with the use of any chemicals which could compromise the use of plastic materials.

Mechanical characteristics Housing in glazed self-extinguishing V2 polycarbonate, UV stabilised, injection moulded. Ecologic anti-aging injected sealing gasket. Diffuser in opal self-extinguishing V2 polycarbonate, UV stabilised, injection moulded. Gear-tray reflector unit with reduced width to increase the indirect light, in hotgalvanised steel, painted in white polyester, fixed to the housing by means of steel rapid devices, hinged opening. Snug fit snap-lock clips for diffuser mounting, in transparent polycarbonate, tamper-proof screwdriver opening. Fixing brackets in stainless steel. Electrical characteristics Electronic wiring 230V-50/60Hz. In compliance with EN 60598-1. Entry for power-supply cable in upper central part of body.

On request • LED sources with different colour temperatures • wiring: dimmable, class II, emergency wiring (only 24W and 30W)

Accessories Accessories on page 334.

Dimensions

A H

314

3F Linda LED Opal 3F Linda LED Opal Code 58748

Snug fit snap-lock clips in transparent polycarbonate.

E=100% Code

Item

Electronic 58742 New 3F Linda LED OP 1x12W L660

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

14.5

1575

660x100x100

New

3F Linda LED OP 1x24W L1270

3155

1270x100x100

58748 New

3F Linda LED OP 1x30W L1570

3948

1570x100x100 Waterproof and corrosion-proof

58745

Datasheets, product updates and specifications on our website: www.3f-filippi.com

315

3F Linda LED Transparent Waterproof luminaire for low ceiling environment

Construction characteristics

Source characteristics

Applications

• Linear LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3.

Dry, dusty indoor environments, subject to occasional water splashes. Environments: transit areas, parking lots. Environments where soft diffuse light is required for optimal visual comfort. Virtually in all environments compatibly with the use of any chemicals which could compromise the use of plastic materials. Not suitable in environments where chlorine fumes, ligroin, hydrocarbon mixtures, mineral oil vapours or fumes of lubricating emulsions to cool down machine tools are present. Not suitable for installation on surfaces subject to important vibrations, exposed to weather conditions, on ropes or poles.

On request • LED sources with different colour temperatures • wiring: dimmable, class II

Accessories Accessories on page 334.

Dimensions

Electrical characteristics Electronic wiring 230V-50/60Hz. In compliance with EN 60598-1.

A H

316

3F Linda LED Transparent 3F Linda LED Transparent Code 58811

Code

Item

Electronic 58806 3F Linda LED Trasparente 1x12W L660

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

14.5

1885

660x100x100

58808

3F Linda LED Trasparente 1x24W L1270

3762

1270x100x100

58810

3F Linda LED Trasparente 1x30W L1570

4704

1570x100x100

58809

3F Linda LED Trasparente 2x24W L1270

7359

1270x160x100

58811

3F Linda LED Trasparente 2x30W L1570

9194

1570x160x100

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Waterproof and corrosion-proof

E=100%

317

3F Linda LED Ice Watertight luminaire for refrigeration cells down to -30°C

Construction characteristics

Source characteristics

Installation

• Linear LED modules UR95, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3.

Thanks to new 3F LED technology, the advantages of using 3F Linda LED ICE technology are manifold: • switch-on time less than 5 seconds • unlimited on cycles • lifetime of LED source does not decline in relation to the number of on cycles

Accessories Accessories on page 334.

Mechanical characteristics Self-extinguishing V2 polycarbonate housing, injection moulded, RAL 7035 grey. Ecologic anti-aging injected sealing gasket. Diffuser in self-extinguishing V2 polycarbonate, photo-engraved interior, UV stabilised, injection moulded with smooth outer surface. Gear-tray reflector unit in hot-galvanised steel, painted in white polyester, fixed to the housing by means of steel rapid devices, hinged opening. Snug fit snap-lock clips for diffuser mounting, in stainless steel, tamper-proof screwdriver opening. Fixing brackets in stainless steel. Electrical characteristics Electronic wiring 230V-50/60Hz, fuse. L-N-E line terminal block with ceramic isolator protection powder-filled fuse, rapid type, 5x20 mm, of suitable capacity, breaking capacity 1500 A. Solid single-core silicone rubber insulated wiring cable with fiberglass braid type UG4T2/2 cross section 0.75 mm². In compliance with EN 60598-1.

318

All this results in cost reductions thanks to: • power consumption lower than for fluorescent versions • no heat transfer from the luminaire to the cooled environment

Applications Cells with temperature from -30°C to + 40°C with a humidity degree up to 95%. Before installation, we recommend checking that there are no contraindications to the use of and polycarbonate inside the refrigerating room.

Dimensions

A H

3F Linda LED Ice 3F Linda LED Ice 1x Code 58461

E=100% Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 58457 3F Linda LED Ice 1x24W UR95 L1270

3736

1270x100x100

58461

4672

1570x100x100

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

3F Linda LED Ice 1x30W UR95 L1570

Waterproof and corrosion-proof

3F Linda LED Ice 2x Code 58463

E=100% Code

Item

Electronic 58459 3F Linda LED Ice 2x24W UR95 L1270

7282

1270x160x100

58463

9098

1570x160x100

3F Linda LED Ice 2x30W UR95 L1570

Datasheets, product updates and specifications on our website: www.3f-filippi.com

319

3F Linda LED Sensor Waterproof luminaire with integrated presence sensor for energy-efficient systems

Construction characteristics

Source characteristics

Applications

• Linear LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3.

Dry, dusty indoor environments, subject to occasional water splashes. Environments: transit areas, parking lots. Virtually in all environments compatibly with the use of any chemicals which could compromise the use of plastic materials. Not suitable in environments where chlorine fumes, ligroin, hydrocarbon mixtures, mineral oil vapours or fumes of lubricating emulsions to cool down machine tools are present. Not suitable for installation on surfaces subject to strong vibrations, exposed to the elements, on cables or poles. For specific applications please contact our technical offices.

Mechanical characteristics Self-extinguishing V2 polycarbonate housing, injection moulded, RAL 7035 grey. Ecologic anti-aging injected sealing gasket. Diffuser in self-extinguishing V2 polycarbonate, photo-engraved interior, UV stabilised, injection moulded with smooth outer surface. Gear-tray reflector unit in hot-galvanised steel, painted in white polyester, fixed to the housing by means of steel rapid devices, hinged opening. Snug fit snap-lock clips for diffuser mounting, in stainless steel, tamper-proof screwdriver opening. Fixing brackets in stainless steel. Electrical characteristics Electronic wiring 230V-50/60Hz. In compliance with EN 60598-1. On board DALI light sensor (no cables to be added). Sensor mode: turns on and off depending on light level and presence of persons. CF Corridor function: even with the environment free of people, the luminous flux is maintained at 10%.

320

On request • LED sources with different colour temperatures • wiring: emergency

Accessories Accessories on page 334.

Light Management For more information on 3F Sensor technology, refer to the specific chapter in the “Light Management” section.

Dimensions

A H

3F Linda LED Sensor 3F Linda LED Sensor Code 58642

Integrated presence sensor with ON/OFF function. Snug fit snap-lock clips in stainless steel.

E=100% Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 58638 3F Linda LED 1x30W Sensor L1570

4672

1570x100x100

58642

9098

1570x160x100

3F Linda LED 2x30W Sensor L1570

Waterproof and corrosion-proof

3F Linda LED Sensor CF Code 58645

Integrated presence sensor with Corridor Function mode. Snug fit snap-lock clips in stainless steel.

E=100% Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 58645 3F Linda LED 1x30W Sensor CF L1570

4672

1570x100x100

58649

9098

1570x160x100

3F Linda LED 2x30W Sensor CF L1570

Datasheets, product updates and specifications on our website: www.3f-filippi.com

321

3F Linda Fluo Waterproof luminaire

Construction characteristics

On request

Applications

Illuminotechnical characteristics Diffused symmetric distribution. Using the flux recuperators (see accessories), it is possible to obtain wide to concentrated and asymmetric lighting distribution to meet any installation requirement.

• fuse accessory for electronic version (on page 472) • wiring: dimmable, twin-circuit, class II, emergency wiring for T5, emergency inhibition • luminaires with electronic wiring, in compliance with 94/9/CE (ATEX) standard, group II, category 3D, for Zone 22 • single-lamp luminaire 160 mm wide

Source characteristics • 11W compact fluorescent lamps or T5 lamps, mounted (3F Linda T5 multiWatt series excluded), CCT nominal color temperature 4000 K, color rendering index CRI >80.

Accessories Accessories on page 334.

Dimensions

A H

322

3F Linda Fluo 3F Linda Code 5205

EEI B2 low loss starter wiring, 230V-50Hz, fuse, 0.5 mm² heatresistant wire HT 90°C. Snug fit snap-lock clips in polycarbonate. Fixing brackets in stainless steel.

Code

Item

Starter EEI B2, fuse - Lamps not included 5200 3F Linda 1x18

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

1350

660x100x100

5203

3F Linda 2x18

2700

660x160x100

5201

3F Linda 1x36

3350

1270x100x100

5202

3F Linda 1x58

5200

1570x100x100

5204

3F Linda 2x36

6700

1270x160x100

5205

3F Linda 2x58

134

10400

1570x160x100

Single-lamp version 160 mm wide - Starter EEI B2, fuse - Lamps not included 5206 3F Linda 1x18 LA 26 1350

660x160x100

5207

3F Linda 1x36 LA

3350

1270x160x100

5208

3F Linda 1x58 LA

5200

1570x160x100

Waterproof and corrosion-proof

E>70%

3F Linda Inox AR Code 5215

Very low loss starter wiring EEI B1, 230V-50Hz, fuse, 0.75 mm² heat resistant wire HT 90°C. Snug fit snap-lock clips in stainless steel. Fixing brackets in stainless steel.

E>70% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

Starter EEI B1, fuse - Lamps not included 5210 3F Linda Inox 1x18 AR

1350

660x100x100

5213

42.5

2700

660x160x100

3F Linda Inox 2x18 AR

5211

3F Linda Inox 1x36 AR

3350

1270x100x100

5212

3F Linda Inox 1x58 AR

5200

1570x100x100

5214

3F Linda Inox 2x36 AR

6700

1270x160x100

5215

3F Linda Inox 2x58 AR

128

10400

1570x160x100

Datasheets, product updates and specifications on our website: www.3f-filippi.com

323

3F Linda Fluo 3F Linda Inox Electronic Code 5225

EEI A2 electronic wiring, 230V-50/60Hz, lamp warm start. Snug fit snap-lock clips in stainless steel. Fixing brackets in stainless steel.

E>70% Code

Item

EEI A2 electronic wiring - Lamps not included 5220 3F Linda Inox 1x18 HF

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

1350

660x100x100

5223

3F Linda Inox 2x18 HF

2700

660x160x100

5221

3F Linda Inox 1x36 HF

3350

1270x100x100

5222

3F Linda Inox 1x58 HF

5200

1570x100x100

5224

3F Linda Inox 2x36 HF

6700

1270x160x100

5225

3F Linda Inox 2x58 HF

109

10400

1570x160x100

324

3F Linda Fluo 3F Linda Inox T5 Code 5712

EEI A2 electronic wiring, 230V-50/60Hz, lamp warm start. Snug fit snap-lock clips in stainless steel. Fixing brackets in stainless steel. Concentrated flux recuperator, in specular aluminium with titanium-magnesium surface treatment, non-iridescent, high efficiency, pre-mounted in 1x80 T5 HF code 5720 for environments with considerable height, warehouse aisles or for high localised illumination.

Code

Item

EEI A2 electronic wiring - Pre-mounted lamps 5700 3F Linda Inox 1x14 T5 HF

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

1200

660x100x100

5707

3F Linda Inox 2x14 T5 HF

2400

660x160x100

5702

3F Linda Inox 1x28 T5 HF

2600

1270x100x100

5704

3F Linda Inox 1x35 T5 HF

3300

1570x100x100

5705

3F Linda Inox 1x49 T5 HF

4300

1570x100x100

5709

3F Linda Inox 2x28 T5 HF

5200

1270x160x100

5706

3F Linda Inox 1x80 T5 HF

6150

1570x100x100

5711

3F Linda Inox 2x35 T5 HF

6600

1570x160x100

5712

3F Linda Inox 2x49 T5 HF

106

8600

1570x160x100

Waterproof and corrosion-proof

E>78%

Single-lamp version 160 mm wide, CONCENTRATED flow recuperator - EEI A2 electronic wiring - Pre-mounted lamps 5720 3F Linda Inox 1x80 T5 HF LA CONC 86 6150 1570x160x100

3F Linda Inox T5 MultiWatt Code 5772

EEI A2 multiwatt electronic wiring, 230V-50/60Hz, lamp warm start. Snug fit snap-lock clips in stainless steel. Fixing brackets in stainless steel.

E>78% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

Electronic MultiWatt EEI A2 - Lamps not included 5768 3F Linda Inox 1x28-54 T5 HF

31-58

2600-4450

1270x100x100

5769

3F Linda Inox 1x35-49-80 T5 HF

38-53-86

3300-4300-6150

1570x100x100

5772

3F Linda Inox 2x35-49 T5 HF

76-106

6600-8600

1570x160x100

Datasheets, product updates and specifications on our website: www.3f-filippi.com

325

3F Linda Fluo 3F Linda Compact Code 5277

E>70%

Code

Item

EEI A2 electronic wiring, 230V-50/60Hz, lamp warm start. EEI B2 low loss starter wiring, 230V-50Hz, fuse, 0.5 mm² heatresistant wire HT 90°C. HF version Snug fit snap-lock clips in stainless steel. Starter version Snug fit snap-lock clips in polycarbonate. Supplied in a package of: • 12 pieces for 3F Linda 1x11C (housing width 100 mm) • 8 pieces for 3F Linda 1x11C LA - 2x11C (housing width 160 mm)

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Pre-mounted lamps 5275 3F Linda Inox 1x11C HF

900

300x100x100

5276

3F Linda Inox 1x11C HF LA

900

300x160x100

5277

3F Linda Inox 2x11C HF

1800

300x160x100

900

300x100x100

Starter EEI B2, fuse - Pre-mounted lamps 5260 3F Linda 1x11C 5261

3F Linda 1x11C LA

900

300x160x100

5262

3F Linda 2x11C

1800

300x160x100

326

3F Linda Fluo 3F Linda Fluo HS Code 53956

EEI A2 electronic wiring, 230V-50/60Hz, lamp warm start. In compliance with EN 60598-1. Body and screen in polycarbonate with additional protective treatment for use in environments with aggressive substances. Snug fit snap-lock clips in stainless steel. Fixing brackets in stainless steel. E>78% Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Pre-mounted lamps 53934 3F Linda HS 1x49 T5 LD HF

4300

1570x100x100

53956

106

8600

1570x160x100

3F Linda HS 2x49 T5 LD HF

Waterproof and corrosion-proof

Code

Datasheets, product updates and specifications on our website: www.3f-filippi.com

327

3F Linda Fluo 3F Linda Fluo Emergency EP Code 5231

E>81%

Code

Item

Wiring with emergency lighting system (Industrial version, high flux, 15%), 1h duration, 24h recharge. In compliance with EN 60598-2-22. EP version with maintained operation. Versions Industria and CONC are provided with concentrated flux recuperator. Fixing brackets in stainless steel. Emergency luminous flux on page 444. Pictograms for warning signs available (accessories on page 334).

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

Snug fit snap-lock clips in stainless steel - EEI A2 electronic wiring, EP emergency, fuse - Lamps not included 5265 3F Linda Inox 1x18 HF EP 19 1350 660x160x100 5254

3F Linda Inox 2x18 HF EP

2700

660x160x100

5252

3F Linda Inox 1x36 HF EP

3350

1270x100x100

5253

3F Linda Inox 1x58 HF EP

5200

1570x100x100

5255

3F Linda Inox 2x36 HF EP

6700

1270x160x100

5256

3F Linda Inox 2x58 HF EP

109

10400

1570x160x100

Snug fit snap-lock clips in stainless steel - EEI A2 electronic wiring, EP emergency, fuse - Pre-mounted lamps 5267 3F Linda Inox 1x11C HF LA EP 15 900 300x160x100 5268

3F Linda Inox 2x11C HF EP

1800

300x160x100

5741

3F Linda Inox 1x49 T5 HF EP

4300

1570x100x100

5764

3F Linda Inox 1x80 T5 HF LA EP CONC

6150

1570x160x100

5749

3F Linda Inox 2x49 T5 HF EP

106

8600

1570x160x100

Snug fit snap-lock clips in stainless steel - Starter EEI B1, emergency, fuse - Lamps not included 5246 3F Linda Inox 1x18 AR EP 24 1350 660x160x100 5249

3F Linda Inox 2x18 AR EP

42.5

2700

660x160x100

5247

3F Linda Inox 1x36 AR EP

3350

1270x100x100

5248

3F Linda Inox 1x58 AR EP

5200

1570x100x100

5250

3F Linda Inox 2x36 AR EP

6700

1270x160x100

5251

3F Linda Inox 2x58 AR EP

128

10400

1570x160x100

Snug fit snap-lock clips in polycarbonate - Starter EEI B2, emergency, fuse - Lamps not included 5236 3F Linda 1x18 EP 26 1350 660x160x100 5240

3F Linda 2x18 EP

2700

660x160x100

5238

3F Linda 1x36 EP

3350

1270x100x100

5231

3F Linda Industria 1x58 EP

5200

1570x160x100

5239

3F Linda 1x58 EP

5200

1570x100x100

5241

3F Linda 2x36 EP

6700

1270x160x100

5242

3F Linda 2x58 EP

134

10400

1570x160x100

328

3F Linda Fluo 3F Linda Fluo Emergency ENP Code 5230

Wiring with emergency lighting system (Industrial version, high flux, 15%), 1h duration, 24h recharge. In compliance with EN 60598-2-22. ENP version with not maintained operation. Fixing brackets in stainless steel. Inox - Snug fit snap-lock clips in stainless steel. Emergency luminous flux on page 444.

Code

Item

Sources flux (lm)

Dimensions LxAxH

ENP emergency, fuse - Lamps not included 5235 3F Linda 1x18 ENP

297

660x160x100

5245

3F Linda Inox 1x18 ENP

297

660x160x100

5237

3F Linda 1x36 ENP

520

1270x100x100

5230

3F Linda Industria 1x58 ENP

780

1570x160x100

ENP emergency, fuse - Pre-mounted lamps 5257 3F Linda 1x11C ENP

135

300x160x100

5259

135

300x160x100

3F Linda 1+1x11C ENP

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Absorbed power (W)

Waterproof and corrosion-proof

E>81%

329

3F Linda Fluo Transparent Watertight luminaire for low-ceiling or cosy environments

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics Direct-indirect diffused symmetric distribution. UGR19 version UGR <19. Average luminance <3000 cd/m² for radial angles >65°.

• T5 or 11W compact fluorescent lamps, mounted, CCT nominal color temperature 4000 K, color rendering index CRI >80.

Dry, dusty indoor environments, subject to occasional water splashes. Environments: transit areas, parking lots. Environments where soft diffuse light is required for optimal visual comfort. Virtually in all environments compatibly with the use of any chemicals which could compromise the use of plastic materials. Not suitable in environments where chlorine fumes, ligroin, hydrocarbon mixtures, mineral oil vapours or fumes of lubricating emulsions to cool down machine tools are present. Neither version suitable for installation on surfaces subject to significant vibrations, exposed to the elements, on cables or poles. UGR19 version Environments with VDTs. Environments where demanding visual tasks are performed and comfortable lighting is required.

Mechanical characteristics Housing in transparent self-extinguishing V2 polycarbonate, injection moulded. Ecologic anti-aging injected sealing gasket. Diffuser in self-extinguishing V2 polycarbonate, photo-engraved interior, UV stabilised, injection moulded with smooth outer surface. Gear-tray reflector unit with reduced width to increase the indirect light, in hotgalvanised steel, painted in white polyester, fixed to the housing by means of steel rapid devices, hinged opening. Snug fit snap-lock clips for diffuser mounting, in stainless steel, tamper-proof screwdriver opening. Stainless steel fixing brackets, 11W versions excluded. Electrical characteristics EEI A2 electronic wiring, 230V-50/60Hz, lamp warm start. In compliance with EN 60598-1. EEI B2 low loss starter wiring, 230V-50Hz, fuse. Cascade connection line (available as accessory).

On request • fuse accessory for electronic version (on page 472) • wiring: dimmable, emergency • luminaires with electronic wiring, in compliance with 94/9/CE (ATEX) standard, group II, category 3D, for Zone 22 • 1x-2x 35W T5 versions • 3F Linda Inox UGR19 luminaires with self-extinguishing V2 polycarbonate housing, injection moulded, RAL 7035 grey

Accessories Accessories on page 334. Dimensions

A H

330

3F Linda Fluo Transparent 3F Linda Transparent T5 Code 5376

Snug fit snap-lock clips in stainless steel. Fixing brackets in stainless steel.

Code

Item

EEI A2 electronic wiring - Pre-mounted lamps 5361 3F Linda Trasparente 1x14 T5 HF

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

1200

660x100x100

5363

3F Linda Trasparente 1x28 T5 HF

2600

1270x100x100

5365

3F Linda Trasparente 1x49 T5 HF

4300

1570x100x100

5374

3F Linda Trasparente 2x28 T5 HF

5200

1270x160x100

5376

3F Linda Trasparente 2x49 T5 HF

106

8600

1570x160x100

Waterproof and corrosion-proof

E>79%

3F Linda Transparent T8 Code 5355

Snug fit snap-lock clips in stainless steel. Fixing brackets in stainless steel.

E>70% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Lamps not included 5350 3F Linda Trasparente 1x18 HF

1350

660x100x100

5351

3350

1270x100x100

3F Linda Trasparente 1x36 HF

5352

3F Linda Trasparente 1x58 HF

5200

1570x100x100

5354

3F Linda Trasparente 2x36 HF

6700

1270x160x100

5355

3F Linda Trasparente 2x58 HF

109

10400

1570x160x100

Datasheets, product updates and specifications on our website: www.3f-filippi.com

331

3F Linda Fluo Transparent 3F Linda Transparent Compact Code 5360

Snug fit snap-lock clips in stainless steel.

E>70% Code

Item

EEI A2 electronic wiring - Pre-mounted lamps 5358 3F Linda Trasparente 1x11C HF LA

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

900

300x160x100

5359

3F Linda Trasparente 1x11C HF

900

300x100x100

5360

3F Linda Trasparente 2x11C HF

1800

300x160x100

Starter EEI B2, fuse - Pre-mounted lamps 5356 3F Linda Trasparente 1x11 C

900

300x100x100

5357

1800

300x160x100

3F Linda Trasparente 2x11 C

3F Linda Transparent UGR19 Code 5391

Internal filter (to control luminance) composed by a flux recuperator in aluminum and a PMMA prismatic screen. Snug fit snap-lock clips in stainless steel. Fixing brackets in stainless steel.

L<3000 cd/m² 65° E>70% Code

Item

EEI A2 electronic wiring - Pre-mounted lamps 5391 3F Linda Trasparente 2x35 T5 LD HF UGR19

332

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

6600

1570x160x100

Waterproof and corrosion-proof

3F Linda Accessories Pair of brackets and hooks in stainless steel, with nuts and bolts for fixing to 3F Linda, for ceiling or wallmounting, single and twin-lamp luminaires. Minimum tilt angle = 45°.

45°

148

Code

Item

A0449

15 GZI (w/brack. Linda L300)

A0450

15 RIT (w/brack.+ hooks Linda L660-1270-1570)

Pair of brackets and hooks in stainless steel, with nuts and bolts for fixing to 3F Linda, for wall-mounting, single and twin-lamp luminaires. Code

Item

A0451

15 MBI (w/brack. Linda L300)

A0452

15 FBR (w/brack.+ hooks Linda L660-1270-1570)

Pair of stainless steel hooks for suspended installation, with cable clip and nuts and bolts for installation to 3F Linda. Code

Item

A0462

13 GSI (pair of susp. hooks Linda L300)

A0463

13 TRM (pair of susp. hooks Linda L660-1270-1570)

Wire-guard for applications in dry environments, against shocks coming from any directions, galvanized steel rod Ø 5 mm. Code

Item

A0455

Wire guard 180x1330 03F/Linda

A0456

Wire guard 180x1330 03F/Linda

A0457

Wire guard280x1330 03F/Linda/Beta

A0458

Wire guard 280x1630 03F/Linda/Beta

Only for luminaires fixed without hooks.

Snug fit snap-lock clips for diffuser mounting, in stainless steel, tamper-proof opening.

334

Code

Item

A0160

Inox clips 3F Linda L660-4pcs

A0161

Inox clips 3F Linda L1270-8pcs

A0162

Inox clips 3F Linda L1570-10pcs

3F Linda Accessories 5-pole cascade connection line, rigid H07V2-U cable, HT 90°C, 1.5 mm², terminal blocks with connection capacity 2x2.5 mm². Code

Item

A0447

3F Linda though line L1570

For all 3F Linda, except models: Transparent, OP and Basic.

Anti-condensation diffuser cable gland. Code

Item

A0187

Anti-condensation cable gland

Recommended for installations in environments with temperature sudden changes or subject to condensation.

Code

Item

A0464

26 CSG (pictogram P1 Linda L300)

A0465

26 MTH (pictogram P1 Linda L660)

Waterproof and corrosion-proof

Pictograms for warning signs to be applied on emergency luminaire’s diffusers 160 mm wide. Pictogram, 135 mm high, 240 mm long for 11W, 605 mm long for 18W. Pictograms complying with European standards concerning health and safety signals on the workplace.

Code

Item

A0466

26 DVI (pictogram P2 Linda L300)

A0467

26 MVL (pictogram P2 Linda L660)

Code

Item

A0468

26 GZM (pictogram P3 Linda L300)

A0469

26 PXN (pictogram P3 Linda L660)

Datasheets, product updates and specifications on our website: www.3f-filippi.com

335

3F Linda Accessories Parabolic flow recuperator for WIDE direct distribution, for luminaires 160 mm wide. T8 - Flux recuperator in high-reflecting aluminium. T5 - Flux recuperator in specular aluminium, high-efficiency, with titanium-magnesium surface treatment, non-iridescent. Code

Item

A0400

16 CLE (wide recup.Linda 2x18)

A0401

16 MRA (wide recup. Linda 2x36)

A0402

16 GPA (wide recup. Linda 2x58)

A0670

16 PSG ( wide recup. Linda 2x14 T5 )

A0671

16 RTA (wide recup. Linda 2x28 T5)

A0672

16 BMT (wide recup. Linda 2x35-49 T5)

Parabolic flow recuperator for SUPER-WIDE distribution, for luminaires 160 mm wide. T8 - Flux recuperator in high-reflecting aluminium. T5 - Flux recuperator in specular aluminium, high-efficiency, with titanium-magnesium surface treatment, non-iridescent. Code

Item

A0406

16 HZD (super wide. recup. Linda 2x18 )

A0407

16 NBH (super wide. recup. Linda 2x36)

A0408

16 PCL (super wide. recup.Linda 2x58

A0673

16 ALN (s. wide recup. Linda 2x14 T5 )

A0674

16 FGP (s. wide recup. Linda 2x28 T5)

A0675

16 VBC (s. wide recup. Linda 2x35-49 T5 )

Parabolic flow recuperator for CONCENTRATED direct distribution, for luminaires 160 mm wide. T8 - Flux recuperator in high-reflecting aluminium. T5 - Flux recuperator in specular aluminium, high-efficiency, with titanium-magnesium surface treatment, non-iridescent.

Code

Item

A0412

16 DRI (conc. recup.L 2x18)

A0413

16 REC (conc. recup.Linda 2x36)

A0414

16 LZC (conc. recup.Linda 2x58)

A0676

16 CZA (conc. recup.Linda 2x14 T5)

A0677

16 TLS (conc. recup.Linda 2x28 T5)

A0678

16 GHR (conc. recup. Linda 2x35-49 T5)

336

Code

Item

A0418

16 EFG (conc. recup.Linda LA 1x18)

A0419

16 QST (conc. recup.Linda LA 1x36)

A0420

16 ATB (conc.recup. Linda LA 1x58)

3F Linda Accessories Flow recuperator for CONCENTRATED direct distribution, for luminaires 100 mm wide. T8 - Flux recuperator in high-reflecting aluminium. T5 - Flux recuperator in specular aluminium, high-efficiency, with titanium-magnesium surface treatment, non-iridescent.

Code

Item

A0424

16 SNN (conc. recup.Linda 1x18)

A0425

16 THO (conc. recup.Linda 1x36)

A0426

16 UIP (conc. recup.Linda 1x58)

A0682

16 ZRB (conc. recup.Linda 1x14 T5)

A0683

16 UCL (conc. recup.Linda 1x28 T5)

A0684

16 EDW (conc. recup.Linda 1x35-49-80 T5)

Code

Item

A0430

16 FAS (asym. rec. Linda LA 1x18)

A0431

16 GDM (asym. rec. Linda LA 1x36)

A0432

16 BZF ( asym. rec. Linda LA 1x58)

Waterproof and corrosion-proof

Parabolic flow recuperator for ASYMMETRIC direct distribution, for luminaires 160 mm wide. T8 - Flux recuperator in high-reflecting aluminium.

Flow recuperator for ASYMMETRIC direct distribution, for luminaires 100 mm wide. T8 - Flux recuperator in high-reflecting aluminium. T5 - Flux recuperator in specular aluminium, high-efficiency, with titanium-magnesium surface treatment, non-iridescent.

Code

Item

A0436

16 VMR (asym. recup. Linda 1x18)

A0437

16 ZOQ (asym. recup. Linda 1x36)

A0438

16 XGS (asym. recup. Linda 1x58)

A0688

16 KXH (asym. recup. Linda 1x14 T5)

A0689

16 NQE (asym. recup. Linda 1x28 T5)

A0690

16 WAZ ( asym. rec. Linda 1x35-49-80 T5)

Datasheets, product updates and specifications on our website: www.3f-filippi.com

337

Beta i3F 75-76 LED LED Luminaire with steel body for energy efficient systems

Construction characteristics

On request

Illuminotechnical characteristics Wide or concentrated direct distribution. Lifetime (L90/B10): 30000 h. (Tp 60°C) Lifetime (L85/B10): 50000 h. (Tp 60°C) Lifetime (L75/B10): 80000 h. (Tp 60°C) Photobiological safety RG0 unlimited, risk absent, in compliance with IEC 62471, IEC/TR 62778.

• LED sources with different colour temperatures • different powers • laminated glass • wiring: dimmable, twin-circuit, class II • tamper-proof closure

Mechanical characteristics Single-piece housing in pressed steel, powder-coated in white epoxy-polyester. Oversized flux recuperator in specular aluminium, with titanium-magnesium surface treatment, non-iridescent. Electrical characteristics Electronic wiring 230V-50/60Hz. In compliance with EN 60598-1. EP maintained emergency wiring, 1hr duration with 24hrs recharge, fuse. In compliance with EN 60598-2-22. Entry for power-supply cable at one end cap, through M20x1,5 self-extinguishing nylon cable gland.

Source characteristics • Linear LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3.

Environments in which it is necessary a total protection against falling fragments (eg environments with foodstuffs or machines with moving parts or with extreme temperature changes), use luminaires with laminated glass. Tempered glass is not immune to falling fragments from harmless and caused by shocks or exceptionally derived from the tempering process.

Accessories

Installation

Accessories on page 369. Direct to ceiling, suspended, on busbar or wall-mounted. Mounting hooks and brackets: see accessories.

Applications Ambient temperature from -20°C to +35°C. Dry, dusty indoor environments, subject to occasional water splashes. Industrial environments, stores, environments requiring tamper-proof luminaires, such as prisons, thanks to the clips that can be locked by bolts (on request).

Light Management For more information on CLO technology, refer to the specific chapter in the “Light Management” section.

Dimensions i3F 75

i3F 76 H

H A

338

Beta i3F 75-76 LED Beta i3F LED 75 Wide Code 55600

Wide distribution. Polycarbonate screen etched internally, V2 self-extinguishing, UV stabilized, injection molded, sealing gasket, hinged opening. Stainless steel screen fixing clips.

Code

Item

Electronic 55596 i3F LED 752x12W AMPIO L655

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

29.5

3647

655x235x140

55598

i3F LED 752x24W AMPIO L1265

7296

1265x235x135

55600

i3F LED 752x30W AMPIO L1565

9112

1565x235x135

EP emergency, fuse 55607 i3F LED 752x12W EP AMPIO L655

29.5

3647

655x235x140

55609

i3F LED 752x24W EP AMPIO L1265

7296

1265x235x135

55611

i3F LED 752x30W EP AMPIO L1565

9112

1565x235x135

Waterproof and corrosion-proof

E=100%

Beta i3F LED 75 Concentrated Code 55006

Concentrated distribution. Polycarbonate screen etched internally, V2 self-extinguishing, UV stabilized, injection molded, sealing gasket, hinged opening. Stainless steel screen fixing clips. E=100% Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 55006 i3F LED 752x30W CONC L1565

9181

1565x235x135

EP emergency, fuse 55017 i3F LED 752x30W EP CONC L1565

9181

1565x235x135

Datasheets, product updates and specifications on our website: www.3f-filippi.com

339

Beta i3F 75-76 LED Beta i3F LED 76 VS Wide Code 55138

E=100% Code

Item

Electronic 55134 i3F LED 762x12W AMPIO VS L655

Wide distribution. VS molded antiglare glass, non-combustible, monobloc perimetrical frame in galvanized steel, with sealing gasket, hinged opening. Stainless steel screen fixing clips. Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

29.5

3198

655x235x110

55136

i3F LED 762x24W AMPIO VS L1265

6408

1265x235x105

55138

i3F LED 762x30W AMPIO VS L1565

8006

1565x235x105

EP emergency, fuse 55145 i3F LED 762x12W EP AMPIO VS L655

29.5

3198

655x235x110

55147

i3F LED 762x24W EP AMPIO VS L1265

6408

1265x235x105

55149

i3F LED 762x30W EP AMPIO VS L1565

8006

1565x235x105

Beta i3F LED 76 VT Wide Code 55072

Wide distribution. VT transparent glass, non-combustible, monobloc perimetrical frame in galvanized steel, with sealing gasket, hinged opening. Stainless steel screen fixing clips. E=100% Code

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 55072 i3F LED 762x30W AMPIO VT L1565

9221

1565x235x105

EP emergency, fuse 55083 i3F LED 762x30W EP AMPIO VT L1565

9221

1565x235x105

340

Item

Beta i3F 75-76 LED Beta i3F LED 76 VT Concentrated Code 55666

Concentrated distribution. VT transparent glass, non-combustible, monobloc perimetrical frame in galvanized steel, with sealing gasket, hinged opening. Stainless steel screen fixing clips. E=100% Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 55666 i3F LED 762x30W CONC VT L1565

9386

1565x235x105

EP emergency, fuse 55677 i3F LED 762x30W EP CONC VT L1565

9386

1565x235x105 Waterproof and corrosion-proof

Code

Datasheets, product updates and specifications on our website: www.3f-filippi.com

341

Beta A3F 90-91 LED LED luminaire with aluminum body for energy efficient systems

Construction characteristics

On request

• LED sources with different colour temperatures • laminated glass • fuse accessory (on page 472) • tamper-proof closure

Accessories on page 369.

Any environment except those where aluminium, polycarbonate and glass are unsuitable. Environments in which it is necessary a total protection against falling fragments (eg environments with foodstuffs or machines with moving parts or with extreme temperature changes), use luminaires with laminated glass. Tempered glass is not immune to falling fragments from harmless and caused by shocks or exceptionally derived from the tempering process.

Applications

Installation

Ambient temperature from -20°C to +35°C. Dry, dusty indoor environments, subject to occasional water splashes. Industrial environments, stores, environments requiring tamper-proof luminaires, such as prisons, thanks to the clips that can be locked by bolts (on request).

Suspended, on busbar or wallmounted. Mounting hooks and brackets: see accessories.

Electrical characteristics Electronic wiring 230V-50/60Hz. In compliance with EN 60598-1. Entry for power-supply cable at one end cap, through M20x1,5 self-extinguishing nylon cable gland.

Source characteristics • Linear LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3.

Accessories

Dimensions A3F 90

A3F 91 H

H A

342

Beta A3F 90-91 LED Beta A3F LED 90 Wide Code 55205

Wide distribution. Polycarbonate screen etched internally, V2 self-extinguishing, UV stabilized, injection molded, sealing gasket, hinged opening. Galvanized steel screen fixing clips. E=100% Code

Item

Electronic 55205 A3F LED 902x44W AMPIO L1565

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

100

13032

1565x235x135

Waterproof and corrosion-proof

Beta A3F LED 90 Concentrated Code 55799

Concentrated distribution. Polycarbonate screen etched internally, V2 self-extinguishing, UV stabilized, injection molded, sealing gasket, hinged opening. Galvanized steel screen fixing clips. E=100% Code

Item

Electronic 55799 A3F LED 902x44W CONC L1565

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

100

13267

1565x235x135

343

Beta A3F 90-91 LED Beta A3F LED 91 VS Wide Code 55337

E=100% Code

Item

Electronic 55337 A3F LED 912x44W AMPIO VS L1565

Wide distribution. VS molded antiglare glass, non-combustible, monobloc perimetrical frame in stainless steel, with sealing gasket, hinged opening. Galvanized steel screen fixing clips. Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

100

12486

1565x235x105

Beta A3F LED 91 VT Wide Code 55271

Wide distribution. VT transparent glass, non-combustible, monobloc perimetrical frame in stainless steel, with sealing gasket, hinged opening. Galvanized steel screen fixing clips. E=100% Code

Item

Electronic 55271 A3F LED 912x44W AMPIO VT L1565

344

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

100

12902

1565x235x105

Beta A3F 90-91 LED Beta A3F LED 91 VT Concentrated Code 55865

Concentrated distribution. VT transparent glass, non-combustible, monobloc perimetrical frame in stainless steel, with sealing gasket, hinged opening. Galvanized steel screen fixing clips. E=100% Code

Item

Output flux (lm)

Dimensions LxAxH

100

13342

1565x235x105

Waterproof and corrosion-proof

Electronic 55865 A3F LED 912x44W CONC VT L1565

Absorbed power (W)

Datasheets, product updates and specifications on our website: www.3f-filippi.com

345

Beta Ice LED LED luminaire, high energy efficiency, for refrigeration cells down to -35°C

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics Wide or concentrated direct distribution. Lifetime (L90/B10): 30000 h. (Tp 60°C) Lifetime (L85/B10): 50000 h. (Tp 60°C) Photobiological safety RG0 unlimited, risk absent, in compliance with IEC 62471, IEC/TR 62778.

• Linear LED modules protected up to RH95 relative humidity, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3.

12W version Temperature from -30°C up to +45°C. 24W, 30W versions Temperature from -35°C up to +45°C. 60W version Temperature from -35°C up to +25°C.

Mechanical characteristics Single-piece housing in pressed aluminium, powder-coated in white epoxy-polyester. Oversized flux recuperator in specular aluminium, with titanium-magnesium surface treatment, non-iridescent. Gear-tray unit in hot-galvanised steel, painted in white polyester, fixed to the housing by means of “Ribloc” rapid devices in galvanised steel, hinged opening. Mounting brackets and locking screen clips in stainless steel AISI 304. Electrical characteristics Electronic wiring 230V-50/60Hz, fuse. In compliance with EN 60598-1. Entry for power-supply cable at one end cap, through M20x1,5 self-extinguishing nylon cable gland. L-N-E line terminal block with ceramic isolator protection powder-filled fuse, rapid type, 5x20 mm, of suitable capacity, breaking capacity 1500 A. Solid single-core silicone rubber insulated wiring cable with fiberglass braid type UG4T2/2 cross section 0.75 mm².

346

Accessories

Before installation, we recommend checking that there are no contraindications to the use of aluminium and polycarbonate inside the refrigeration cell.

Accessories on page 369.

Installation By means of slotted corner brackets and stainless steel nuts and bolts. Beta Ice LED luminaires can be installed in environments with humidity rate up to 95%.

Dimensions

H A

H L

Beta Ice LED Beta Ice LED Ampio Code 53862

Wide distribution. Polycarbonate screen etched internally, V2 self-extinguishing, UV stabilized, injection molded, sealing gasket, hinged opening. Galvanized steel screen fixing clips. E=100% Code

Item

Electronic 53860 A3F Ice LED 902x12W UR95 AMPIO L655

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

29.5

3647

655x235x140

A3F Ice LED 902x24W UR95 AMPIO L1265

7296

1265x235x135

A3F Ice LED 902x30W UR95 AMPIO L1565

9112

1565x235x135

53863

A3F Ice LED 902x60W UR95 AMPIO L1565

136

16435

1565x235x135 Waterproof and corrosion-proof

53861 53862

Beta Ice LED CONCENTRATO Code 53867

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 53867 A3F Ice LED 902x30W UR95 CONC L1565

9181

1565x235x135

53868

136

16730

1565x235x135

A3F Ice LED 902x60W UR95 CONC L1565

Datasheets, product updates and specifications on our website: www.3f-filippi.com

347

348

3F info point Beta Kit LED Retrofit LED

The Fluorescent to LED wiring conversion kit offers the following benefits: - Energy savings of up to 56% - Protect your investment in existing luminaires: no need to buy new units - No maintenance operations for lamp change - No maintenance operations for starter change

FLUO

Save on electricity, eliminate maintenance Savings compared to version

Fluorescent Version to replace

LED Retrofit Kit equivalent

Total luminaire power draw

Starter

EEI A2 electronic wiring*

2x36W T8

2x18W

40 W

56%

44%

2x58W T8

2x30W

68 W

52%

38%

Waterproof and corrosion-proof

* not to mention the significant savings from reduced maintenance costs!

Simple, quick and low-cost conversion:

Diffuser opening

Removal of existing gear tray unit is quick and does not require tools, just turn the two “Ribloc” devices by 90°

Kit connection LED Retrofit via quick terminal block and refitting the “Ribloc” devices

Diffuser closing

Step 1

Step 2

Step 3

Step 4

Datasheets, product updates and specifications on our website: www.3f-filippi.com

349

Beta Kit LED Retrofit LED conversion kit for i3F and A3F fluorescent luminaires

Construction characteristics

On request

• retrofit Kit for luminaires of length 655mm (1-2x18W) - power 1x36W 1x58W - for Beta Stainless A3F 92-93 2x58W T8 with gear-tray 2x30W - for Beta Ice 90 • wide flux recuperator to increase luminous flux by 5% • wiring: dimmable, twin-circuit, different powers • version with asymmetric lighting distribution

Mechanical characteristics Gear-tray in hot galvanized steel, painted in white polyester, to be fixed to the body by rapid devices “Ribloc”. For installations prior to 2010, the hinge opening is lost. Electrical characteristics Electronic wiring 230V-50/60Hz, constant output power. In compliance with EN 60598-1.

350

Beta Kit LED Retrofit Kit LED Retrofit Beta 2x con schermo in policarbonato Code A5026

Flow recuperator in specular aluminium, with superficial titaniummagnesium treatment, non-iridescent (only for CONCENTRATED version). Diffuser in self-extinguishing V2 polycarbonate, photo-engraved interior, UV stabilised, injection moulded, with smooth outer surface, sealing gasket. E=100% Code

Item

Electronic A5057 Kit LED i3F 75,A3F 90,A3F 92 - L1265 - 2x18W + PC

Absorbed power (W)

Output flux (lm)

Fixture dimensions

5439

1265x235x135

Kit LED i3F 75,A3F 90 - L1565 - 2x30W + PC

8566

1565x235x135

Kit LED i3F 75,A3F 90 - L1565 - 2x30W CONC + PC

9181

1565x235x135 Waterproof and corrosion-proof

A5026 A5012

Kit LED Retrofit Beta 2x per schermo in vetro Code A5117

Flow recuperator in specular aluminium, with superficial titaniummagnesium treatment, non-iridescent (only for CONCENTRATED version). Glass diffuser is NOT included in the kit.

E=100% Code

Item

Absorbed power (W)

Output flux (lm)

Fixture dimensions

Electronic A5148 Kit LED i3F 76,A3F 91,A3F 93 - L1265 - 2x18W

5503

1265x235x105

A5117

Kit LED i3F 76,A3F 91 - L1565 - 2x30W

8668

1565x235x105

A5103

Kit LED i3F 76,A3F 91 - L1565 - 2x30W CONC

9386

1565x235x105

Datasheets, product updates and specifications on our website: www.3f-filippi.com

351

Beta Kit LED Retrofit Anti-glare moulded glass

Anti-glare moulded glass, noncombustible, tempered, locked to the single-piece galvanised steel perimeter frame, sealing gasket. For installations prior to 2010, the hinge opening is lost.

Code

Item

A5184

Printed glass Beta 2x i3F 76 - L1565

A5185

Printed glass Beta 2x i3F 76 - L1265

352

Waterproof and corrosion-proof

Beta i3F 75-76 Fluo Luminaire with steel housing and polycarbonate or glass diffuser

Construction characteristics Illuminotechnical characteristics Wide or concentrated distribution. Mechanical characteristics Single-piece housing in pressed steel, powder-coated in white epoxy-polyester. Oversized flux recuperator in specular aluminium, with titanium-magnesium surface treatment, non-iridescent (18W excluded). Electrical characteristics EEI A2 electronic wiring, 230V-50/60Hz, lamp warm start. Entry for power-supply cable at one end cap, through M20x1,5 self-extinguishing nylon cable gland. EP maintained emergency wiring on one single lamp, Ni-Cd battery, inverter, 1hr duration with 24hrs recharge, fuse. In compliance with EN 60598-2-22.

Source characteristics • T5 fluorescent lamps, mounted, CCT nominal color temperature 4000 K, color rendering index CRI >80.

• wiring: dimmable, twin-circuit, emergency wiring (2x80W excluded) • emergency inhibition • 18W version with flux recuperator • 49-80, 36 and 58W versions without flux recuperators • luminaires with asymmetric or super-wide flow recuperators • electronic luminaires, class II, in compliance with 94/9/CE (ATEX) standard, for Zone 22 • tamper-proof closure

Accessories on page 369.

Dry, dusty indoor environments, subject to occasional water splashes. Industrial environments, stores, environments requiring tamper-proof luminaires, such as prisons, thanks to the clips that can be locked by bolts (on request). Environments in which it is necessary a total protection against falling fragments (eg environments with foodstuffs or machines with moving parts or with extreme temperature changes), use luminaires with laminated glass. Tempered glass is not immune to falling fragments from harmless and caused by shocks or exceptionally derived from the tempering process.

Applications

Installation

2x80 T5 versions are suitable for environment temperature up to 25°C (for heavier duty uses, require dedicated wirings).

Direct to ceiling, suspended, on busbar or wall-mounted. Mounting hooks and brackets: see accessories.

Accessories

Dimensions i3F 75

On request • different powers with T5 lamps • MultiWatt electronic ballasts for T5 lamps (except 2x80W) • V0 polycarbonate flat diffuser • laminated glass • fuse accessory (on page 472)

354

i3F 76 H

H A

Beta i3F 75-76 Fluo Beta i3F 75 T8 Wide Code 5409

Wide distribution. Polycarbonate screen etched internally, V2 self-extinguishing, UV stabilized, injection molded, sealing gasket, hinged opening. Stainless steel screen fixing clips.

Code

Item

EEI A2 electronic wiring - Lamps not included 5796 i3F 751x18 HF

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

1350

655x235x140

5797

i3F 752x18 HF

2700

655x235x140

5406

i3F 751x36 HF AMPIO

3350

1265x235x135

5407

i3F 751x58 HF AMPIO

5200

1565x235x135

5408

i3F 752x36 HF AMPIO

6700

1265x235x135

5409

i3F 752x58 HF AMPIO

109

10400

1565x235x135

EP emergency, fuse - Lamps not included 5811 i3F 752x36 HF EP AMPIO

6700

1265x235x135

5812

109

10400

1565x235x135

i3F 752x58 HF EP AMPIO

Waterproof and corrosion-proof

E>75%

Beta i3F 75 T8 Concentrated Code 5809

Concentrated distribution. Polycarbonate screen etched internally, V2 self-extinguishing, UV stabilized, injection molded, sealing gasket, hinged opening. Stainless steel screen fixing clips.

E=73% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Lamps not included 5808 i3F 751x58 HF CONC

5200

1565x235x135

5809

109

10400

1565x235x135

i3F 752x58 HF CONC

Datasheets, product updates and specifications on our website: www.3f-filippi.com

355

Beta i3F 75-76 Fluo Beta i3F 75 T5 Wide Code 56403

Wide distribution. Polycarbonate screen etched internally, V2 self-extinguishing, UV stabilized, injection molded, sealing gasket, hinged opening. Stainless steel screen fixing clips.

E>87% Code

Item

EEI A2 electronic wiring - Pre-mounted lamps 56400 New i3F 751x49 T5 HO HF AMPIO

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

4300

1565x235x135

New

i3F 751x80 T5 HO HF AMPIO

6150

1565x235x135

56402 New

i3F 752x49 T5 HO HF AMPIO

106

8600

1565x235x135

New

i3F 752x80 T5 HO HF AMPIO

170

12300

1565x235x135

56401 56403

Beta i3F 75 T5 Concentrated Code 56407

Concentrated distribution. Polycarbonate screen etched internally, V2 self-extinguishing, UV stabilized, injection molded, sealing gasket, hinged opening. Stainless steel screen fixing clips.

E=89% Code

Item

EEI A2 electronic wiring - Pre-mounted lamps 56406 New i3F 751x80 T5 HO HF CONC 56407

356

New

i3F 752x80 T5 HO HF CONC

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

6150

1565x235x135

170

12300

1565x235x135

Beta i3F 75-76 Fluo Beta i3F 76 T8 Wide Code 5429

Wide distribution. VT transparent glass, non-combustible, monobloc perimetrical frame in galvanized steel, with sealing gasket, hinged opening. Stainless steel screen fixing clips.

Code

Item

EEI A2 electronic wiring - Lamps not included 5817 i3F 761x18 HF

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

1350

655x235x110

5818

i3F 762x18 HF

2700

655x235x110

5426

i3F 761x36 HF AMPIO

3350

1265x235x105

5427

i3F 761x58 HF AMPIO

5200

1565x235x105

5428

i3F 762x36 HF AMPIO

6700

1265x235x105

5429

i3F 762x58 HF AMPIO

109

10400

1565x235x105

EP emergency, fuse - Lamps not included 5844 i3F 762x36 HF EP AMPIO

6700

1265x235x105

5845

109

10400

1565x235x105

i3F 762x58 HF EP AMPIO

Waterproof and corrosion-proof

E>70%

Beta i3F 76 T8 Concentrated Code 5822

Concentrated distribution. VT transparent glass, non-combustible, monobloc perimetrical frame in galvanized steel, with sealing gasket, hinged opening. Stainless steel screen fixing clips.

E=70% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Lamps not included 5821 i3F 761x58 HF CONC

5200

1565x235x105

5822

109

10400

1565x235x105

i3F 762x58 HF CONC

Datasheets, product updates and specifications on our website: www.3f-filippi.com

357

Beta i3F 75-76 Fluo Beta i3F 76 T5 Wide Code 56413

Wide distribution. VT transparent glass, non-combustible, monobloc perimetrical frame in galvanized steel, with sealing gasket, hinged opening. Stainless steel screen fixing clips.

E>83% Code

Item

EEI A2 electronic wiring - Pre-mounted lamps 56410 New i3F 761x49 T5 HO HF AMPIO

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

4300

1565x235x105

New

i3F 761x80 T5 HO HF AMPIO

6150

1565x235x105

56412 New

i3F 762x49 T5 HO HF AMPIO

106

8600

1565x235x105

New

i3F 762x80 T5 HO HF AMPIO

170

12300

1565x235x105

56411 56413

Beta i3F 76 T5 Concentrated Code 56417

Concentrated distribution. VT transparent glass, non-combustible, monobloc perimetrical frame in galvanized steel, with sealing gasket, hinged opening. Stainless steel screen fixing clips.

E=84% Code

Item

EEI A2 electronic wiring - Pre-mounted lamps 56416 New i3F 761x80 T5 HO HF CONC 56417

358

New

i3F 762x80 T5 HO HF CONC

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

6150

1565x235x105

170

12300

1565x235x105

Waterproof and corrosion-proof

Beta A3F 90-91 Fluo Luminaire with aluminium housing and polycarbonate or glass diffuser

Construction characteristics Illuminotechnical characteristics Wide or concentrated distribution. Mechanical characteristics Single-piece housing in pressed aluminium, powder-coated in white epoxy-polyester. Oversized flux recuperator in specular aluminium, with titanium-magnesium surface treatment, non-iridescent (18W excluded). Electrical characteristics EEI A2 electronic wiring, 230V-50/60Hz, lamp warm start. Entry for power-supply cable at one end cap, through M20x1,5 self-extinguishing nylon cable gland. EP maintained emergency wiring on one single lamp, Ni-Cd battery, inverter, 1hr duration with 24hrs recharge, fuse. In compliance with EN 60598-2-22.

Applications

• wiring: dimmable, twin-circuit, emergency wiring (2x80W excluded) • very low loss starter wiring EEI B1, 230V-50Hz, power factor correction, fuse (dedicated for installation in high-temperature environments with peaks up to 45°C ensures greater thermal balance inside the luminaire) • emergency inhibition • 18W version with flux recuperator • 49-80, 36 and 58W versions without flux recuperators • luminaires with asymmetric or super-wide flow recuperators • electronic luminaires, class II, in compliance with 94/9/CE (ATEX) standard, for Zone 22 • tamper-proof closure

2x80 T5 versions are suitable for environment temperature up to 25°C (for heavier duty uses, require dedicated wirings). Dry, dusty indoor environments, subject to occasional water splashes. Industrial environments, stores, environments requiring tamper-proof luminaires, such as prisons, thanks to the clips that can be locked by bolts (on request). Environments in which it is necessary a total protection against falling fragments (eg environments with foodstuffs or machines with moving parts or with extreme temperature changes), use luminaires with laminated glass. Tempered glass is not immune to falling fragments from harmless and caused by shocks or exceptionally derived from the tempering process.

Accessories

Installation Accessories on page 369. Direct to ceiling, suspended, on busbar or wall-mounted. Mounting hooks and brackets: see accessories.

Source characteristics • T5 fluorescent lamps, mounted, CCT nominal color temperature 4000 K, color rendering index CRI >80.

Dimensions A3F 90

On request • different powers with T5 lamps • laminated glass • V0 polycarbonate flat diffuser • MultiWatt electronic ballasts for T5 lamps (except 2x80W) • fuse accessory (on page 472)

360

A3F 91 H

H A

Beta A3F 90-91 Fluo Beta A3F 90 T8 Wide Code 5449

Wide distribution. Polycarbonate screen etched internally, V2 self-extinguishing, UV stabilized, injection molded, sealing gasket, hinged opening. Galvanized steel screen fixing clips.

Code

Item

EEI A2 electronic wiring - Lamps not included 5847 A3F 901x18 HF

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

1350

655x235x140

5848

A3F 902x18 HF

2700

655x235x140

5446

A3F 901x36 HF AMPIO

3350

1265x235x135

5447

A3F 901x58 HF AMPIO

5200

1565x235x135

5448

A3F 902x36 HF AMPIO

6700

1265x235x135

5449

A3F 902x58 HF AMPIO

109

10400

1565x235x135

EP emergency, fuse - Lamps not included 5866 A3F 902x36 HF EP AMPIO

6700

1265x235x135

5867

109

10400

1565x235x135

A3F 902x58 HF EP AMPIO

Waterproof and corrosion-proof

E>75%

Beta A3F 90 T8 Concentrated Code 5860

Concentrated distribution. Polycarbonate screen etched internally, V2 self-extinguishing, UV stabilized, injection molded, sealing gasket, hinged opening. Galvanized steel screen fixing clips.

E=73% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Lamps not included 5859 A3F 901x58 HF CONC

5200

1565x235x135

5860

109

10400

1565x235x135

A3F 902x58 HF CONC

Datasheets, product updates and specifications on our website: www.3f-filippi.com

361

Beta A3F 90-91 Fluo Beta A3F 90 T5 Wide Code 56423

Wide distribution. Polycarbonate screen etched internally, V2 self-extinguishing, UV stabilized, injection molded, sealing gasket, hinged opening. Galvanized steel screen fixing clips.

E>87% Code

Item

EEI A2 electronic wiring - Pre-mounted lamps 56420 New A3F 901x49 T5 HO HF AMPIO

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

4300

1565x235x135

New

A3F 901x80 T5 HO HF AMPIO

6150

1565x235x135

56422 New

A3F 902x49 T5 HO HF AMPIO

106

8600

1565x235x135

New

A3F 902x80 T5 HO HF AMPIO

170

12300

1565x235x135

56421 56423

Beta A3F 90 T5 Concentrated Code 56427

Concentrated distribution. Polycarbonate screen etched internally, V2 self-extinguishing, UV stabilized, injection molded, sealing gasket, hinged opening. Galvanized steel screen fixing clips.

E=89% Code

Item

EEI A2 electronic wiring - Pre-mounted lamps 56426 New A3F 901x80 T5 HO HF CONC 56427

362

New

A3F 902x80 T5 HO HF CONC

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

6150

1565x235x135

170

12300

1565x235x135

Beta A3F 90-91 Fluo Beta A3F 91 T8 Wide Code 5469

Wide distribution. VT transparent glass, non-combustible, monobloc perimetrical frame in stainless steel, with sealing gasket, hinged opening. Galvanized steel screen fixing clips.

Code

Item

EEI A2 electronic wiring - Lamps not included 5868 A3F 911x18 HF

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

1350

655x235x110

5869

A3F 912x18 HF

2700

655x235x110

5466

A3F 911x36 HF AMPIO

3350

1265x235x105

5467

A3F 911x58 HF AMPIO

5200

1565x235x105

5468

A3F 912x36 HF AMPIO

6700

1265x235x105

5469

A3F 912x58 HF AMPIO

109

10400

1565x235x105

EP emergency, fuse - Lamps not included 5884 A3F 912x36 HF EP AMPIO

6700

1265x235x105

5885

109

10400

1565x235x105

A3F 912x58 HF EP AMPIO

Waterproof and corrosion-proof

E>70%

Beta A3F 91 T8 Concentrated Code 5873

Concentrated distribution. VT transparent glass, non-combustible, monobloc perimetrical frame in stainless steel, with sealing gasket, hinged opening. Galvanized steel screen fixing clips.

E=70% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Lamps not included 5872 A3F 911x58 HF CONC

5200

1565x235x105

5873

109

10400

1565x235x105

A3F 912x58 HF CONC

Datasheets, product updates and specifications on our website: www.3f-filippi.com

363

Beta A3F 90-91 Fluo Beta A3F 91 T5 Wide Code 56433

Wide distribution. VT transparent glass, non-combustible, monobloc perimetrical frame in stainless steel, with sealing gasket, hinged opening. Galvanized steel screen fixing clips.

E>83% Code

Item

EEI A2 electronic wiring - Pre-mounted lamps 56430 New A3F 911x49 T5 HO HF AMPIO

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

4300

1565x235x105

New

A3F 911x80 T5 HO HF AMPIO

6150

1565x235x135

56432 New

A3F 912x49 T5 HO HF AMPIO

106

8600

1565x235x135

New

A3F 912x80 T5 HO HF AMPIO

170

12300

1565x235x135

56431 56433

Beta A3F 91 T5 Concentrated Code 56437

Concentrated distribution. VT transparent glass, non-combustible, monobloc perimetrical frame in stainless steel, with sealing gasket, hinged opening. Galvanized steel screen fixing clips.

E=84% Code

Item

EEI A2 electronic wiring - Pre-mounted lamps 56436 New A3F 911x80 T5 HO HF CONC 56437

364

New

A3F 912x80 T5 HO HF CONC

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

6150

1565x235x135

170

12300

1565x235x135

Waterproof and corrosion-proof

Beta A3F 92-93 Fluo Luminaire with stainless steel housing and polycarbonate or glass diffuser

Construction characteristics

On request

Illuminotechnical characteristics Wide or concentrated distribution.

• laminated glass • V0 polycarbonate flat diffuser • wiring: twin-circuit, emergency, class II • very low loss starter wiring EEI B1, 230V-50Hz, power factor correction, fuse • emergency inhibition • 18W version with flux recuperator • luminaires with asymmetric or superwide flow recuperators • tamper-proof closure

Mechanical characteristics Single piece pressed stainless steel housing. Oversized flux recuperator in specular aluminium, with titanium-magnesium surface treatment, non-iridescent (18W excluded). Electrical characteristics EEI A2 electronic wiring, 230V-50/60Hz, lamp warm start. Entry for power-supply cable at end cap through M20x1,5 nickel-plated brass cable gland. EP maintained emergency wiring on one single lamp, Ni-Cd battery, inverter, 1hr duration with 24hrs recharge, fuse. In compliance with EN 60598-2-22.

occasional water splashes. Environments in which is required a high degree of protection or tamper-proof closure. Environments in which it is necessary a total protection against falling fragments (eg environments with foodstuffs or machines with moving parts or with extreme temperature changes), use luminaires with laminated glass. Tempered glass is not immune to falling fragments from harmless and caused by shocks or exceptionally derived from the tempering process.

Accessories

Installation

Accessories on page 369. Directly to the ceiling, suspended, on busbar, wall. Mounting hooks and brackets: see accessories.

Applications Service areas, prisons, or with aggressive chemicals. Dry, dusty indoor environments, subject to

Dimensions A3F 92

A3F 93 H

H A

366

Beta A3F 92-93 Fluo Beta A3F 92 Wide Code 5900

Wide distribution. Polycarbonate screen etched internally, V2 self-extinguishing, UV stabilized, injection molded, sealing gasket, hinged opening. Galvanized steel screen fixing clips.

Code

Item

EEI A2 electronic wiring - Lamps not included 5893 A3F 921x18 HF

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

1350

655x235x140

5894

A3F 922x18 HF

2700

655x235x140

5897

A3F 921x36 HF AMPIO

3350

1265x235x135

5898

A3F 921x58 HF AMPIO

5200

1565x235x135

5899

A3F 922x36 HF AMPIO

6700

1265x235x135

5900

A3F 922x58 HF AMPIO

109

10400

1565x235x135

EP emergency, fuse - Lamps not included 5902 A3F 922x36 HF EP AMPIO

6700

1265x235x135

5903

109

10400

1565x235x135

A3F 922x58 HF EP AMPIO

Waterproof and corrosion-proof

E>75%

Beta A3F 92 Concentrated Code 5976

Concentrated distribution. Polycarbonate screen etched internally, V2 self-extinguishing, UV stabilized, injection molded, sealing gasket, hinged opening. Galvanized steel screen fixing clips.

E=73% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Lamps not included 5975 A3F 921x58 HF CONC

5200

1565x235x135

5976

109

10400

1565x235x135

A3F 922x58 HF CONC

Datasheets, product updates and specifications on our website: www.3f-filippi.com

367

Beta A3F 92-93 Fluo Beta A3F 93 Wide Code 53893

Wide distribution. VT transparent glass, non-combustible, monobloc perimetrical frame in stainless steel, with sealing gasket, hinged opening. Galvanized steel screen fixing clips.

E>70% Code

Item

EEI A2 electronic wiring - Lamps not included 53884 A3F 931x18 HF

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

1350

655x235x110

53885

A3F 932x18 HF

2700

655x235x110

53890

A3F 931x36 HF AMPIO

3350

1265x235x105

53891

A3F 931x58 HF AMPIO

5200

1565x235x105

53892

A3F 932x36 HF AMPIO

6700

1265x235x105

53893

A3F 932x58 HF AMPIO

109

10400

1565x235x105

EP emergency, fuse - Lamps not included 53898 A3F 932x36 HF EP AMPIO

6700

1265x235x105

53899

109

10400

1565x235x105

A3F 932x58 HF EP AMPIO

Beta A3F 93 Concentrated Code 5873

Concentrated distribution. VT transparent glass, non-combustible, monobloc perimetrical frame in stainless steel, with sealing gasket, hinged opening. Galvanized steel screen fixing clips.

E=70% Code

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Lamps not included 53904 A3F 931x58 HF CONC

5200

1565x235x105

53905

109

10400

1565x235x105

368

Item

A3F 932x58 HF CONC

Beta A3F - i3F Accessories Pair of mounting brackets and hooks for wall-mounting, with nuts and bolts for luminaire fastening, everything in stainless steel. Code

Item

A0503

15 CD (pair of bracket and hooks A3F)

Pair of steel hooks for suspended installation, with nuts and bolts for luminaire fastening. Code

Item

A0500

13 DH (pair of susp. galvanised steel hooks i3F)

A0501

13 HC (pair of susp. stainless steel hooks A3F)

Code

Item

A0457

Wire guard280x1330 03F/Linda/Beta

A0458

Wire guard 280x1630 03F/Linda/Beta

Waterproof and corrosion-proof

Wire-guard for applications in dry environments, against shocks coming from any directions, galvanized steel rod Ø 5 mm.

5-pole cascade connection line, stiff cable H07 V2-U, HT 90°C, 1.5 mm², terminal blocks with connection capacity 2x2.5 mm². Code

Item

A0508

20 TKA (casc. conn. line i3F/A3F 36)

A0509

20 ZFE (casc. conn. line i3F/A3F 58)

For A3F versions it is necessary to drill one end cap.

Anti-condensation diffuser cable gland. Code

Item

A0187

Anti-condensation cable gland

Recommended for installations in environments with temperature sudden changes or subject to condensation.

Datasheets, product updates and specifications on our website: www.3f-filippi.com

369

Beta 430 LED Industrial high-efficiency LED luminaire

Construction characteristics

On request

Illuminotechnical characteristics Wide symmetrical or hyperconcentrated distribution. Photobiological safety RG0 unlimited, risk absent, in compliance with IEC 62471, IEC/TR 62778.

• anti-glare moulded VS glass • laminated glass • diffuser in prismatic PMMA or polycarbonate, either transparent or prismatic • wiring: dimmable, single-circuit

Mechanical characteristics Housing in steel, powder-coated in white epoxy-polyester. Quick connection in polycarbonate M20x1.5 cable gland for access to the terminal block.

Accessories

Electrical characteristics Electronic wiring 230V-50/60Hz. In compliance with EN 60598-1. Quick connection. Twin-circuit.

Source characteristics • Linear LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3. • Zhaga Book 7 compliant.

extreme temperature changes), use luminaires with laminated glass. Tempered glass is not immune to falling fragments from harmless and caused by shocks or exceptionally derived from the tempering process.

Notes HST glass HST glass is composed of a tempered glass sheet which has undergone a thermal stabilisation process (Heat Soak Test) which reduces the risk of spontaneous breakage caused by nickel-sulfide inclusions inside the glass. It is not immune from harmless falling fragments, caused byshocks or, exceptionally, derived from the tempering process. It is the user’s responsibility to identify the most suitable type of diffuser for the application type.

Accessories on page 376.

Applications Ambient temperature from -20°C to +35°C. Environments: commercial, industrial, sports, stores, sports halls, gymnasiums. Environments in which it is necessary a total protection against falling fragments (eg environments with foodstuffs or machines with moving parts or with

Dimensions

H A

370

Beta 430 LED Beta 430 LED Code 53445

Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 53438 i3F LED 764x50W CR AMPIO VT L1251

209

28162

1251x430x159

53452

209

28162

1251x430x159

i3F LED 764x50W CR AMPIO SL L1251

53445

i3F LED 764x63W CR AMPIO VT L1551

261

33390

1551x430x159

53459

i3F LED 764x63W CR AMPIO SL L1551

261

33390

1551x430x159

Waterproof and corrosion-proof

E=100%

Lifetime (L90/B50): 30000 h. (Tp 60°C) Lifetime (L80/B50): 50000 h. (Tp 60°C) Lifetime (L70/B50): 80000 h. (Tp 60°C) Total flow recuperator in specular aluminium, high efficiency, with superficial titanium-magnesium treatment, non-iridescent. Single-piece perimeter frame in galvanized steel, sealing gasket, hinged opening by means of clips in galvanized steel. Safety system to prevent diffuser from falling. Transparent glass HST tempered, non-combustible. SL transparent PMMA flat diffuser.

Beta 430 LED IperConcentrated Code 53490

E=100%

Code

Item

Lifetime (L90/B10): 30000 h. (Tp 60°C) Lifetime (L85/B10): 50000 h. (Tp 60°C) Lifetime (L75/B10): 80000 h. (Tp 60°C) Total flow recuperator in specular aluminium, high efficiency, with superficial titanium-magnesium treatment, non-iridescent. Single-piece perimeter frame in galvanized steel, sealing gasket, hinged opening by means of clips in galvanized steel. Safety system to prevent diffuser from falling. Transparent glass HST tempered, non-combustible. SL transparent PMMA flat diffuser.

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 53490 Beta Iperconc LED 4x30W CR VT IP64 L1551

136

17924

1551x430x159

53493

136

17924

1551x430x159

Beta Iperconc LED 4x30W CR SL IP64 L1551

Datasheets, product updates and specifications on our website: www.3f-filippi.com

371

Beta 430 Fluo Industrial high-efficiency luminaire

Construction characteristics Illuminotechnical characteristics Wide symmetrical, concentrated or hyperconcentrated distribution. Mechanical characteristics Housing in steel, powder-coated in white epoxy-polyester. Quick connection in polycarbonate M20x1.5 cable gland for access to the terminal block. Electrical characteristics EEI A2 electronic wiring, 230V-50/60Hz, twin-lamp ballasts with lamp warm start. Quick connection. Twin circuit for version with 4 sources (lamps 1-4 and 2-3) and 6 sources (lamps 1-2-5-6 and 3-4).

Source characteristics • T5, T8 or compact fluorescent lamps, mounted, CCT nominal color temperature 4000 K, color rendering index CRI >80.

standard, group II, category 3D, Zone 22 • open version with cathode covers in steel, for luminaire to prevent lamp from falling

Tempered glass is not immune to falling fragments from harmless and caused by shocks or exceptionally derived from the tempering process.

Accessories

Notes

Accessories on page 376.

HST glass HST glass is composed of a tempered glass sheet which has undergone a thermal stabilisation process (Heat Soak Test) which reduces the risk of spontaneous breakage caused by nickel-sulfide inclusions inside the glass. It is not immune from harmless falling fragments, caused byshocks or, exceptionally, derived from the tempering process. It is the user’s responsibility to identify the most suitable type of diffuser for the application type.

Applications Ambient temperature from -15°C to +40°C. Dry, dusty indoor environments, subject to occasional water splashes. Environments: commercial, exhibition areas, industrial, sports, fairs, stores, gymnasiums. Environments in which it is necessary a total protection against falling fragments (eg environments with foodstuffs or machines with moving parts or with extreme temperature changes), use luminaires with laminated glass.

Dimensions

On request • fuse accessory (on page 472) • anti-glare moulded VS glass • laminated glass • self-extinguishing polycarbonate diffuser • wiring: dimmable, high flux emergency • luminaires without fast connection, Class II, in compliance with 94/9/CE (ATEX)

372

H A

Beta 430 Fluo Beta 430 Fluo Wide IP43 Code 56459

Total flow recuperator in specular aluminium, high efficiency, with superficial titanium-magnesium treatment, non-iridescent.

Code

Item

EEI A2 electronic wiring - Pre-mounted lamps 56458 New i3F 714x54 T5 HO LD HF CR AMPIO IP43

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

228

17800

1251x430x151

New

i3F 714x80 T5 HO LD HF CR AMPIO IP43

340

24600

1551x430x151

56484 New

i3F 716x49 T5 HO LD HF CR AMPIO IP43

318

25800

1551x430x151

New

i3F 716x54 T5 HO LD HF CR AMPIO IP43

342

26700

1251x430x151

218

20800

1551x430x151

56459 56485

EEI A2 electronic wiring - Lamps not included 57004 i3F 714x58 LD HF CR AMPIO IP43

Waterproof and corrosion-proof

E>100%

Beta 430 Fluo Concentrated IP43 Code 56461

Total flow recuperator in specular aluminium, high efficiency, with superficial titanium-magnesium treatment, non-iridescent.

E=100% Code

Item

EEI A2 electronic wiring - Pre-mounted lamps 56461 New i3F 714x80 T5 HO LD HF CR CONC IP43

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

340

24600

1551x430x151

New

i3F 716x49 T5 HO LD HF CR CONC IP43

318

25800

1551x430x151

56489 New

i3F 716x54 T5 HO LD HF CR CONC IP43

342

26700

1251x430x151

218

20800

1551x430x151

56488

EEI A2 electronic wiring - Lamps not included 57012 i3F 714x58 LD HF CR CONC IP43

Datasheets, product updates and specifications on our website: www.3f-filippi.com

373

Beta 430 Fluo Beta 430 Fluo IperConcentrated IP43 Code 56515

Total flow recuperator in specular aluminium, high efficiency, with superficial titanium-magnesium treatment, non-iridescent.

E=100% Code

Item

EEI A2 electronic wiring - Pre-mounted lamps 56515 New Beta Iperconc 2x80 T5 HO LD HF CR IP43

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

170

12300

1551x430x151

New

Beta Iperconc 2+2x54 T5 HO LD HF CR IP43

228

17800

1251x430x151

56516 New

Beta Iperconc 2+2x80 T5 HO LD HF CR IP43

340

24600

1551x430x151

56517

Beta 430 Fluo Wide IP64 Code 56451

Total flow recuperator in specular aluminium, high efficiency, with superficial titanium-magnesium treatment, non-iridescent. Single-piece perimeter frame in galvanized steel, sealing gasket, hinged opening by means of clips in galvanized steel. Safety system to prevent diffuser from falling. Transparent glass HST tempered, non-combustible. SL transparent PMMA flat diffuser. E=91% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Pre-mounted lamps 56450 New i3F 764x54 T5 HO LD HF CR AMPIO IP64

228

17800

1251x430x159

56466 New

i3F 764x54 T5 HO LD HF CR AMPIO SL IP64

228

17800

1251x430x159

56451 New

i3F 764x80 T5 HO LD HF CR AMPIO IP64

340

24600

1551x430x159

i3F 764x80 T5 HO LD HF CR AMPIO SL IP64

340

24600

1551x430x159

i3F 766x49 T5 HO LD HF CR AMPIO IP64

318

25800

1551x430x159

i3F 766x49 T5 HO LD HF CR AMPIO SL IP64

318

25800

1551x430x159

i3F 766x54 T5 HO LD HF CR AMPIO IP64

342

26700

1251x430x159

56467

New

56474 New 56494

New

56475 New 56495 57390

New

i3F 766x54 T5 HO LD HF CR AMPIO SL IP64

342

26700

1251x430x159

i3F 764x55 C AMPIO IP64

236

17200

654x430x159

EEI A2 electronic wiring - Lamps not included 57049 i3F 764x58 LD HF CR AMPIO SL IP64

218

20800

1551x430x159

57094

218

20800

1551x430x159

374

i3F 764x58 LD HF CR AMPIO IP64

Beta 430 Fluo Beta 430 Fluo Concentrated IP64 Code 56453

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Pre-mounted lamps 56453 New i3F 764x80 T5 HO LD HF CR CONC IP64

340

24600

1551x430x159

56469 New

i3F 764x80 T5 HO LD HF CR CONC SL IP64

340

24600

1551x430x159

56478 New

i3F 766x49 T5 HO LD HF CR CONC IP64

318

25800

1551x430x159

56498 New

i3F 766x49 T5 HO LD HF CR CONC SL IP64

318

25800

1551x430x159

56479 New

i3F 766x54 T5 HO LD HF CR CONC IP64

342

26700

1251x430x159

56499 New

i3F 766x54 T5 HO LD HF CR CONC SL IP64

342

26700

1251x430x159

EEI A2 electronic wiring - Lamps not included 57055 i3F 764x58 LD HF CR CONC SL IP64

218

20800

1551x430x159

57102

218

20800

1551x430x159

i3F 764x58 LD HF CR CONC IP64

Waterproof and corrosion-proof

Code

Beta 430 Fluo IperConcentrated IP64 Code 56510

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Pre-mounted lamps 56510 New Beta Iperconc 2x80 T5 HO LD HF CR VT IP64

170

12300

1551x430x159

56520 New

Beta Iperconc 2x80 T5 HO LD HF CR SL IP64

170

12300

1551x430x151

56512

New

Beta Iperc. 2+2x54T5 HO LD HF CR VT IP64

228

17800

1251x430x159

56522

New

Beta Iperc. 2+2x54T5 HO LD HF CR SL IP64

228

17800

1251x430x151

56511 New

Beta Iperc. 2+2x80T5 HO LD HF CR VT IP64

340

24600

1551x430x159

New

Beta Iperc. 2+2x80T5 HO LD HF CR SL IP64

340

24600

1551x430x151

56521

Item

Datasheets, product updates and specifications on our website: www.3f-filippi.com

375

Beta 430 Accessories Wire-guard for applications in dry environments, against shocks coming from any directions, in galvanized steel rod Ø 5 mm; only for luminaires fixed with no hooks.

376

Code

Item

A0528

Wireguard Beta 4x54-6x54

A0529

Wireguard Beta 4x58/80-6x49

Waterproof and corrosion-proof

3F Cub LED and Fluorescent Lighter. Brighter. More energy savings. With quick connection. The best Cub ever.

3F Cub LED and 3F Cub Fluorescent are luminaires for industry, sales areas and large spaces based on dedicated technologies allowing long lamp life and low maintenance, even in particularly tough conditions.

Patented

Thanks to Quick Connection (standard on all versions), minimal time is required to install the luminaires: as it is no longer necessary to open them, the terminal block can be extracted quickly and simply from the upper opening for connection. - Easy and quick installation - Energy savings - Light quality - High efficiency - High dependability - Economical Management

thermal shielding effect

dust flows upwards

378

3F Cub LED e Fluorescente 3F Cub LED

3F Cub Fluorescent

Light quality - Turning on and turning back on always immediate. - Excellent colour rendering Ra> 80 (in line with European standard EN 12464 on workplace lighting). - Reduced glare. - No strobe effect. - Wide tolerance on mains voltage (± 10%). - No UV emissions. - Brightness of light - Adjustable luminous flux and/or lamp automatic switch-off thanks to sensors and photocells.

- Excellent colour rendering Ra> 80 (in line with European standard EN 12464 on workplace lighting). - Reduced glare. - No strobe effect. - Wide tolerance on mains voltage (± 10%). - Very low UV emissions. - High flux emergency wiring. - Adjustable luminous flux and/or lamp automatic switch-off thanks to sensors and photocells.

- Efficiency greater than 102 lm/W thanks to the oversized aluminium flow recuperator with titanium-magnesium treatment, with linear LED modules.

Waterproof and corrosion-proof

High efficiency - Luminous efficiency over 90% thanks to oversized flow recuperator in specular aluminium with titanium-magnesium treatment, with 55W compact electronic lamps.

High dependability - 3F Cub Led is suitable for ambient temperatures up to +45°C thanks to its oversized aluminium body which guarantees components optimum thermal balance. - LED modules compliant with Zhaga specifications for changing LED strips. - Photobiological risk absent (IEC/EN 62471:2010).

- 3F Cub Fluorescent is IMQ certified for ambient temperatures up to +40°C for the 4x55 version, up to +30°C for the 6x55 version, thanks to the oversized aluminium housing which guarantees thermal equilibrium for the electrical components. The fluorescent IP43 versions also have no dust deposits on the lamps and internal flow recuperators thanks to the thermal shielding effect created by the luminaire itself.

Economical Management - Very high source lifetime, 50,000 hrs. - Standard twin-circuit wiring. - Less decrease of the source’s light flow over time thanks to heat dissipation. - Increased safety: the electronic wiring ensures automatic disconnection of the power supply in case of defective LED module. - Highly efficient luminaire: over 102 lm/W. - Mercury-free source - Less heat lost to the environment - No non-scheduled maintenance operations: faulty or burned-out strips do not compromise work. - Easy and quick installation and power-supply connection also thanks to quick connection. - 3F Cub LED has glass or diffuser for total protection, for environments with large quantities of dust to maintain lighting efficiency over time and minimise cleaning of reflecting surfaces. - Very long lamp average life.

- Standard twin-circuit wiring. - Lower decrease of luminous flux of lamps over time. - Increased safety: the electronic wiring ensures automatic disconnection of the power supply in case of defective lamp. - Highly efficient lamps: over 87 lm/W. - No non-scheduled maintenance operations: faulty or burned-out lamps do not compromise work. - Easy and quick installation and power-supply connection also thanks to quick connection. - Fume-repellent flow recuperators allowing installation in industrial environments, even of versions without diffuser. - For environments with significant amounts of dust, versions with glass or diffuser for total protection, to maintain lighting efficiency over time and minimise cleaning of reflecting surfaces.

Energy savings - High energy efficiency electronic ballasts. - Fast return on investment - Electronic ballasts in EI A1 or EEI A2 efficiency class.

Datasheets, product updates and specifications on our website: www.3f-filippi.com

- 3F Cub complies with 2000/55/EC European Directive on energy efficiency requirements of ballasts for fluorescent lamps.

379

3F Cub LED LED luminaire for high energy efficiency systems

Construction characteristics

Source characteristics

Illuminotechnical characteristics Wide symmetric distribution. Lifetime (L90/B10): 30000 h. (Tp 60°C) Lifetime (L85/B10): 50000 h. (Tp 60°C) Lifetime (L75/B10): 80000 h. (Tp 60°C) Photobiological safety RG0, risk absent, in compliance with IEC 62471.

• Linear LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3.

Mechanical characteristics Housing with double casing in pressed aluminium, powder-coated in white epoxy-polyester, hinged opening. Quick connection in polycarbonate M20x1.5 cable gland for access to the terminal block. Ecologic anti-aging injected sealing gaskets. Stainless steel clips. Total flow recuperator in specular aluminium, with superficial titaniummagnesium treatment, non-iridescent. VT transparent or VS moulded anti glare glass, noncombustible, tempered. SP transparent PMMA flat diffuser, multilenticular, anti-glare, prismatic exterior. Fixing bracket.

On request • concentrated distribution • laminated glass • wiring: single-circuit, emergency • LED modules, CCT nominal color temperature 6500 K

Light Management

Accessories Accessories on page 389.

Applications 100W version Ambient temperature from -20°C to +45°C. 150W version Ambient temperature from -20°C to +40°C.

Dimensions

Electrical characteristics Electronic wiring 230V-50/60Hz. DALI electronic wiring 230V-50/60Hz. Quick connection. Twin-circuit.

A=L

380

Environments: commercial, industrial, sports, stores, sports halls, gymnasiums. Environments in which it is necessary a total protection against falling fragments (eg environments with foodstuffs or machines with moving parts or with extreme temperature changes), use luminaires with laminated glass. Tempered glass is not immune to falling fragments from harmless and caused by shocks or exceptionally derived from the tempering process.

3F Cub LED 3F Cub LED VT Code 56333

Total flow recuperator in specular aluminium, high efficiency, with superficial titanium-magnesium treatment, non-iridescent. Transparent glass VT tempered, non-combustible.

Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 56330 3F CUB LED 100W CR VT

110

14222

680x680x187

56333

163

20994

680x680x187

110

14222

680x680x187

163

20994

680x680x187

3F CUB LED 150W CR VT

DALI electronic 56332 New 3F CUB LED 100W DALI CR VT 56335

New

3F CUB LED 150W DALI CR VT

Waterproof and corrosion-proof

E=100%

3F Cub LED SP Code 56347

Total flow recuperator in specular aluminium, high efficiency, with superficial titanium-magnesium treatment, non-iridescent. SP transparent methacrylate diffuser, prismatic outside, antiglare. E=100% Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 56344 3F CUB LED 100W CR SP

110

13408

680x680x187

56347

163

19691

680x680x187

DALI electronic 56346 New 3F CUB LED 100W DALI CR SP

110

13408

680x680x187

56349 New

163

19691

680x680x187

3F CUB LED 150W CR SP

3F CUB LED 150W DALI CR SP

Datasheets, product updates and specifications on our website: www.3f-filippi.com

381

3F Cub LED 3F Cub LED VS Code 56340

Total flow recuperator in specular aluminium, high efficiency, with superficial titanium-magnesium treatment, non-iridescent. VS moulded glass, anti-glare, tempered, non-combustible. E=100% Code

Item

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

Electronic 56337 3F CUB LED 100W CR VS

110

13083

680x680x187

56340

163

19282

680x680x187

110

13083

680x680x187

163

19282

680x680x187

3F CUB LED 150W CR VS

DALI electronic 56339 New 3F CUB LED 100W DALI CR VS 56342

382

New

3F CUB LED 150W DALI CR VS

Waterproof and corrosion-proof

3F Cub LED Examples of design Comparison to 400W JM reflector Design data: Room dimensions Room height Installation height

50x50 meters 9 meters 8 meters

Number of luminaires:

56 luminaires (6.3x7.1 metre grid)

Like-for-like replacement of light points Reflection

ceiling 30% walls 30% floor 10%

Work surface height

0.85 meters

400W JM reflector

3F Cub LED 150W CR VT

Lighting values

345 lux

364 lux

+ 6%

Luminaire power

440 W

162 W

- 63%

Single circuit (100%)

Twin circuit (50% - 100%)

Yes, depending on requirements

8.000 hours

50.000 hours

+42.000 hours

3F Cub R90 4x55 IP43

3F Cub LED 150W CR VT

Difference

334 lux

364 lux

+ 9% - 33%

Circuit type Regulation of luminous flux and power? Source life

Difference

Comparison to 3F Cub R90 4x55 IP43 Design data: Room dimensions Room height Installation height

50x50 meters 9 meters 8 meters

Number of luminaires:

56 luminaires (6.3x7.1 metre grid)

Like-for-like replacement of light points Reflection

ceiling 30% walls 30% floor 10%

Work surface height

0.85 meters

Lighting values Luminaire power Circuit type Regulation of luminous flux and power? Source life

384

240 W

162 W

Twin circuit (50% - 100%)

Yes, depending on requirements

15.000 hours

50.000 hours

+35.000 hours

3F Cub LED Comparison to 3F Cub 4x55 VT IP64 Design data: Room dimensions Room height Installation height

30x30 meters 7 meters 6 meters

Number of luminaires:

30 luminaires (6x5 metre grid)

Reflection

ceiling 30% walls 30% floor 10%

Work surface height

0.85 meters

3F Cub 4x55 CR VT IP64

3F Cub LED 100W CR VT

Difference

Lighting values

334 lux

366 lux

+ 10%

Luminaire power

240 W

110 W

- 54%

Twin circuit (50% - 100%)

Yes, depending on requirements

15.000 hours

50.000 hours

Circuit type Regulation of luminous flux and power? Source life

+35.000 hours

Why choose 3F Cub LED? Never-ending light 3F Cub LED is equipped with new 3F LED technology whose sources specially developed for demanding applications guarantee an operating lifetime of over 50,000 hours, at the end of which at least 50% of the LED will still be providing 80% of their initial light output!

Beauty which doesn’t blind! The 3F Cub LED diffuser attenuates or cancels out all glare and creates a truly enviable lighting uniformity (in relation to the installation height). What’s more, its clean, elegant lines make 3F Cub LED a luminaire which can fit in perfectly with any environment.

Eco-logical 3F Cub LED has been created according to the principles of Eco Design, and stands out for: - Manufactured using energy from solar panels and assembled according to our “zero mileage” philosophy - Limited use of different materials, facilitating assembly, installation and recycling - Recyclable green packaging

Datasheets, product updates and specifications on our website: www.3f-filippi.com

385

Waterproof and corrosion-proof

Like-for-like replacement of light points

3F Cub Fluo Fast connection and lamp avoid

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics Wide or concentrated symmetric lighting distribution.

• Compact fluorescent lamps, mounted, CCT nominal color temperature 4000 K, color rendering index CRI >80.

Mechanical characteristics Housing with double casing in pressed aluminium, powder-coated in white epoxy-polyester, hinged opening. Quick connection in polycarbonate M20x1.5 cable gland for access to the terminal block. Ecologic anti-aging injected sealing gaskets. Stainless steel clips. Total flow recuperator in specular aluminium, with superficial titaniummagnesium treatment, non-iridescent. VT transparent glass, non-combustible, tempered. SL transparent PMMA flat diffuser. Fixing bracket.

On request

Ambient temperature from -15°C to +40°C. Dry, dusty indoor environments, subject to occasional water splashes. Environments: commercial, industrial, sports, stores, sports halls, gymnasiums. Environments in which it is necessary a total protection against falling fragments (eg environments with foodstuffs or machines with moving parts or with extreme temperature changes), use luminaires with laminated glass. Tempered glass is not immune to falling fragments from harmless and caused by shocks or exceptionally derived from the tempering process.

• moulded anti-glare glass • laminated glass • fuse accessory (on page 472) • wiring: dimmable • emergency inhibition • IP64 luminaires with no fast connection, Class II, in compliance with 94/9/CE (ATEX) standard, group II, category 3D, for Zone 22 • double quick connection

Accessories Accessories on page 389.

Electrical characteristics EEI A2 electronic wiring, 230V-50/60Hz, twin-lamp ballasts with lamp warm start. Fast connection and lamp avoid. Twin-circuit. EP maintained emergency wiring, on one single lamp, (entry for power-supply cable separated from fast connection), high flux (15%), 1hr duration with 24hrs recharge, fuse. In compliance with EN 60598-2-22.

Dimensions

A=L

386

3F Cub Fluo 3F Cub R90 Wide IP43 Code 56200

Wide distribution. Total flow recuperator in specular aluminium, high efficiency, with superficial titanium-magnesium treatment, non-iridescent. Thermal shielding effect from dust in the louvre compartment to maintain optimal efficiency over time.

E>91% Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Pre-mounted lamps 56200 3F Cub R90 4x55 CR

236

17200

680x680x187

EP emergency, fuse - Pre-mounted lamps 56203 3F Cub R90 4x55 EP CR

236

17200

680x680x187 Waterproof and corrosion-proof

Code

3F Cub IP64 Code 56210

E>70%

Code

Item

Wide distribution. IP64 totally protected against dust. Total flow recuperator in specular aluminium, high efficiency, with superficial titanium-magnesium treatment, non-iridescent. Transparent glass VT tempered, non-combustible. SL transparent PMMA flat diffuser.

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

GLASS - EEI A2 electronic wiring - Pre-mounted lamps 56210 3F Cub 4x55 CR VT IP64

236

17200

680x680x187

GLASS - EP emergency, fuse - Pre-mounted lamps 56211 3F Cub 4x55 EP CR VT IP64

236

17200

680x680x187

METHACRYLATE - EEI A2 electronic wiring - Pre-mounted lamps 56214 3F Cub 4x55 CR SL IP64 236

17200

680x680x187

METHACRYLATE - EP emergency, fuse - Pre-mounted lamps 56215 3F Cub 4x55 EP CR SL IP64

17200

680x680x187

Datasheets, product updates and specifications on our website: www.3f-filippi.com

236

387

3F Cub Fluo 3F Cub R90 IP43 Concentrated Code 56206

Concentrated distribution. Total flow recuperator in specular aluminium, high efficiency, with superficial titanium-magnesium treatment, non-iridescent. Thermal shielding effect from dust in the louvre compartment to maintain optimal efficiency over time.

E=89% Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

EEI A2 electronic wiring - Pre-mounted lamps 56206 3F Cub R90 4x55 CR CONC

236

17200

680x680x187

EP emergency, fuse - Pre-mounted lamps 56208 3F Cub R90 4x55 EP CR CONC

236

17200

680x680x187

3F Cub IP64 Concentrated Code 56212

E=68%

Code

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

GLASS - EEI A2 electronic wiring - Pre-mounted lamps 56212 3F Cub 4x55 CR CONC VT IP64

236

17200

680x680x187

GLASS - EP emergency, fuse - Pre-mounted lamps 56213 3F Cub 4x55 EP CR CONC VT IP64

236

17200

680x680x187

METHACRYLATE - EEI A2 electronic wiring - Pre-mounted lamps 56216 3F Cub 4x55 CR CONC SL IP64 236

17200

680x680x187

METHACRYLATE - EP emergency, fuse - Pre-mounted lamps 56217 3F Cub 4x55 EP CR CONC SL IP64

17200

680x680x187

388

Item

Concentrated distribution. IP64 totally protected against dust. Total flow recuperator in specular aluminium, high efficiency, with superficial titanium-magnesium treatment, non-iridescent. Transparent glass VT tempered, non-combustible. SL transparent PMMA flat diffuser.

236

3F Cub Accessories Ceiling-mounted bracket in hot-galvanised steel. Code

Item

A0213

Ceiling-mounted bracket

Wire-guard for indoor dry applications, with double fastening (wire-guard and luminaire), for shocks coming from any directions, not transmitting the shocks to the luminaire but to the ceiling; in galvanized steel rod Ø 5 mm. To install it, ceiling-mounted bracket code A0213 is always necessary.

Item

A0210

Wireguard 3F Cub

Waterproof and corrosion-proof

Code

Datasheets, product updates and specifications on our website: www.3f-filippi.com

389

News and updates available on: www.3f-filippi.com > Products > Specific applications

Specific applications Product

392

3F 66

392

New 3F 66 LED

394

3F FS

394

New 3F FS PC LED

396

3F Metro

396

New 3F Metro LED

Source

Outdoor

LED

•

Interior

LED

Railways

•

LED

398

3F1

398

3F1

LED

400

3F1 IP64

LED

Metro

•

• •

•

Specific applications

Page

391

New

3F 66 LED LED luminaire for outdoor lighting of civil and industrial buildings, porticos and underpasses

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics Downward bilateral distribution. Lifetime (L85/B10): 30000 h. (Tp 65°C) Lifetime (L80/B10): 50000 h. (Tp 65°C) Photobiological safety RG0, risk absent, in compliance with IEC 62471.

• LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3.

Wall mounting, particularly suitable for outdoor lighting of civil and industrial buildings, porticos, underpasses and walkways. Controlled downward bilateral distribution provides uniform lighting on work surfaces. Control of light pollution as per UNI EN 12464-2.

Mechanical characteristics Self-extinguishing V2 polycarbonate housing, injection moulded, RAL 7035 grey. Flow recuperator in specular aluminium with superficial titanium-magnesium treatment, non-iridescent. Transparent PMMA diffuser, injection moulded, with smooth outer surface. Sealing gaskets between housing and diffuser in ecological anti-aging EPDM. Tamper-proof diffuser seal with 4 clips to housing, in stainless steel. Electrical characteristics Electronic wiring 230V-50/60Hz, fuse, class II. In compliance with EN 60598-1. Line entry at rear through rubber seal or at side after drilling.

On request • LED sources with different colour temperatures • different powers

Dimensions

392

3F 66 LED 3F 66 LED Code 8357

E=100% Code

Item

Electronic 8357 New 3F 66 1 LED 6 II 3F 66 2 LED 12 II

Output flux (lm)

Dimensions LxAxH

474

255x176x344

892

255x176x344

Specific applications

8358

New

Absorbed power (W)

Datasheets, product updates and specifications on our website: www.3f-filippi.com

393

New

3F FS PC LED LED Luminaire for lighting railway tunnels

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics Downward bilateral wide distribution. Lifetime (L90/B10): 30000 h. (Tp 65°C) Lifetime (L85/B10): 50000 h. (Tp 65°C) Photobiological safety RG0, risk absent, in compliance with IEC 62471.

• LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3.

Safety lighting for railway tunnels. Controlled bilateral distribution provides uniform lighting on work surfaces.

Mechanical characteristics Self-extinguishing V2 polycarbonate housing, injection moulded, RAL 7035 grey. Base in stainless steel, for rapid installation and disinstallation of luminaire without tools (by 4 stainless steel side clips). Flow recuperator in specular aluminium with superficial titanium-magnesium treatment, non-iridescent. Diffuser in transparent self-extinguishing V2 polycarbonate, UV stabilised, injection moulded with smooth outer surface and differentiated prismatic inner surface. Sealing gaskets between housing and diffuser in ecological anti-aging EPDM. Tamper-proof diffuser seal with 2 lateral clips to housing, in stainless steel.

On request • housing in die-cast SG AI Si 2/GD 5076 aluminium alloy, with chrome-free protective treatment, RoHS 2002/95/CE compatible, painted with polyester resin powder, TGIC free, painted Ral 7035 grey for exterior use • LED sources with different colour temperatures • fluorescent sources • connectors plug / socket • different powers • emergency

Dimensions Electrical characteristics Electronic wiring 230V-50/60Hz, fuse, class II. Feeding on the luminaire with cable FG7(O)M1 2x1,5 mm² connected to IP67 mobile connector consists flush mounting box in UL94V0 self-extinguishing thermoplastic resin. Crimp contacts. Gland M20x1,5 self-extinguishing polyamide. In compliance with EN 60598-1.

394

3F FS PC LED 3F FS PC LED Code 8330

E=100% Code

Item

Electronic 8330 New 3F FS PC LED 1x4W-350 AM II

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

410

255x174x360

Example of typical installation for railway galleries - Guarantees safe lighting, even with very wide spacing,thanks to the special design of the recuperator.

- Extremely easy maintenance thanks to rapid removal, with stainless steel clips, from the brackets attached to wall. - Luminaire is highly resistant to stress and to vibrations caused by passing trains.

15 m

12 lx

3,5 lx

12 lx

2,5 m

11,40m

Datasheets, product updates and specifications on our website: www.3f-filippi.com

395

Specific applications

Safety lighting in lux, obtained with luminaires installed on two sides of the gallery, in staggered sequence.

New

3F Metro LED LED luminaire for lighting tube tunnels

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics Downward bilateral wide distribution. Lifetime (L80/B10): 30000 h. (Tp 65°C) Lifetime (L70/B10): 50000 h. (Tp 65°C) Photobiological safety RG0, risk absent, in compliance with IEC 62471.

• LED modules, CCT nominal color temperature 4000 K, color rendering index CRI >80. • Color initial tolerance (MacAdam): 3.

Safety lighting for subway tunnels with wall fixing. Housing and diffuser are in Polycarbonate UL94 V0, certified by the french laboratory SAFRAN for fire reaction, harmful gas and smoke emission.

Mechanical characteristics Self-extinguishing V0 polycarbonate housing, injection moulded, grey RAL 7035. Upper base with wall mount, in galvanised steel. Galvanised steel base anchored to housing, slotted for rapid installation/ removal of luminaire. Deep flow recuperator in specular aluminium with superficial titaniummagnesium treatment, non-iridescent. Diffuser in transparent selfextinguishing V0 polycarbonate, UV stabilised, injection moulded with smooth outside and differentiated prismatic inner surface. Sealing gaskets between housing and diffuser in ecological anti-aging EPDM. Tamper-proof diffuser seal with 4 clips to housing, in stainless steel. Drilling template in stainless steel.

396

• different powers • LED sources with different colour temperatures • emergency • other types of connections • fluorescent sources

Dimensions L

Electrical characteristics Electronic wiring 230V-50/60Hz, fuse, class II. In compliance with EN 60598-1. Plug/socket IP67, fG7(O)M1 2x1.5 mm² cable, M20x1.5 cable gland in selfextinguishing polyamide. Line input on fixed socket with M25x1.5 threaded hole and polyamide cable gland with 10-17mm diameter tightening range.

On request

3F Metro LED 3F Metro LED Code 8366

E=100% Code

Item

Electronic 8366 New 3F Metro 1 LED 8 AMPIO II

Absorbed power (W)

Output flux (lm)

Dimensions LxAxH

731

469x189x350

Example of typical installation for subway tunnels Ordinary lighting in lux, obtained with luminaires installed on two sides of the tunnel, in staggered rows. - Guarantees ordinary lighting, even with very wide spacing, thanks to the special design of the recuperator. - Housing and diffuser certified SAFRAN for fume emission and fire response.

Specific applications

- Extremely easy maintenance thanks to rapid removal. - Luminaire is highly resistant to stress and to vibrations caused by passing trains.

10 m

43 lx

11 lx

43 lx

8,80 m

Datasheets, product updates and specifications on our website: www.3f-filippi.com

397

3F1 Multifunctional lighting system

Electric wiring distribution for: Mains supply Telephone and data distribution networks Smoke and fire detectors Burglar alarm systems Intrusion detection systems Antitheft devices for goods Sound diffusion Suitable also for running UTP/FTP cat 6 network cabling. Check, according to quantity and type of cables to be housed, the possibility to use 3F1 Single or 3F1 Double. For detailed information on the series, consult our website at www.3f-filippi.it

Patented

3F1 Double

Capacity 8650 mm2

3F1 Single

Capacity 5485 mm2 Capacity 2250 mm2

398

Specific applications

3F1

Datasheets, product updates and specifications on our website: www.3f-filippi.com

399

3F1 IP64 Multifunctional lighting system with high IP rating Multifunctional lighting system suitable for waiting or transit areas, platform-roof, underpasses, where IP64 ingress protection is required. The structure is in hot-galvanised steel painted in RAL 9006 colour and can be installed on the ceiling or suspended.

3F1 IP64 Single in SP version

3F1 IP64 Double in VS version

The structure (IP40 rated) contains IP64 luminaires in the VS version with stainless-steel frame and moulded glass, or SP version with polycarbonate diffuser.

For more detailed information on this product range, consult our website at www.3f-filippi.it

Patented

400

3F1 IP64

Application in industrial areas

Specific applications

Application in collective spaces

Application in railway stations Datasheets, product updates and specifications on our website: www.3f-filippi.com

401

News and updates available on: www.3f-filippi.com > Products > Healthcare applications

Healthcare applications Product

404

3F Relax

404

3F Relax

406

LUCECURA

406

LUCECURA

408

3Fine Germicide

408

3Fine Germicide

Source

Bedhead

Fluo

•

Fluo

•

Fluo

Air cleaning

•

Healthcare applications

Page

403

3F Relax Bedhead range for hospital rooms or nursing facilities

Construction characteristics

Source characteristics

Notes

Illuminotechnical characteristics Asymmetrical direct light distribution for reading and examination light and indirect for general room lighting.

• T5 electronic fluorescent lamps, CCT nominal color temperature 4000 K, color rendering index CRI >80.

• Servizi elettrici Bticino serie Matix bianca su placche in resina colore avorio. 3F Relax 1500 and 1800 • On one end: bypass socket 2x10/16A+PE with protective fuse, examination light switch, hanging button panel to call nurse and to switch-on reading light, ID pilot lamp. • On the other end: Schuko bypass socket UNEL 2x10/16A+PE with protective fuse. 3F Relax 1000 • On one end: bipolar switch for reading light, blind cap, pull button for call. • On the other end: blind cap, bypass socket 2x10/16A+PE with protective fuse.

Mechanical characteristics Housing in boxed steel, painted white. Front profile in extruded aluminium with rounded edges, painted white, resists all commonly used disinfectants and detergents. Rounded heads in aluminium. Housing contains both lighting and electrical systems. High-efficiency flow recuperator, for direct and indirect lighting, in specular aluminium with titanium-magnesium surface treatment, non-iridescent. Lower diffuser in transparent PMMA, prismatic interior, anti-glare. Upper diffuser in smooth transparent PMMA. Electrical characteristics EEI A2 electronic wiring, 230V-50/60Hz, lamp warm start. Heatresistant wire, HT 90°C, CEI 20-20 and wire N07V-K section 1.5/2.5 mm² to connect electrical units. Line input along entire length of luminaire. Nylon line connection terminal block, equipotential terminal for conductor with max. section of 16 mm². In compliance with UNI EN ISO 11197 and EN 60601-1.

404

On request • other lamp types, luminaires suitable for continuous channels • hook for IV drip • housing in different RAL colours • night light • equipotential outlet • wiring: dimmable • 3F Relax 1000 hanging button panel to call nurse and to switch-on reading light, ID pilot lamp, relay

Dimensions

L H

3F Relax 3F Relax Code 9210

Indirect E>84% Direct E>68% Code

Item

Dimensions LxAxH

EEI A2 electronic wiring - Pre-mounted lamps 9210 3F Relax 1000 1x39 Ind + 1x39 Dir T5 LD HF

1000x130x170

9238

3F Relax 1500 1x49 Ind + 1+1x14W Dir T5 LD HF

1500x130x170

9239

3F Relax 1800 1x49 Ind + 1+1x14W Dir T5 LD HF

1800x130x170

Installation 3F Relax 1500

1000 500

1500

1800

3F Relax 1800 1800 750

1800

Datasheets, product updates and specifications on our website: www.3f-filippi.com

900

Healthcare applications

3F Relax 1000

1800

405

LUCECURA Bedhead range for hospital rooms with compartment for medical gases

Construction characteristics

On request

Notes

Illuminotechnical characteristics Asymmetrical direct light distribution for reading and examination light and indirect for general room lighting.

• housing in RAL colour • gas box • equipotential outlet • night light • dimmable wiring

Each bed has the following electrical systems: • Biticino Magic series on ivorycoloured resin plates and button panel to call medical staff. • Hanging button panel to call nurse and to switch-on reading light, ID pilot lamp, relay, UNEL and 2x10/16 A+E bypass socket with protective fuses, examination light switch, 2 sliding polycarbonate hooks to hang button panel.

Mechanical characteristics Housing in extruded aluminium with rounded edges, painted white, resists all normally used disinfectants and detergents. Housing is divided into three separate compartments: upper for lighting, central for electrical services, lower reserved for distribution of medical gases. Flux recuperator in highreflecting aluminium for indirect lighting. Lower diffuser in transparent polycarbonate, prismatic interior, anti-glare. Upper diffuser in transparent polycarbonate. Electrical characteristics EEI A2 electronic wiring, 230V-50/60Hz, lamp warm start. In compliance with UNI EN ISO 11197 and EN 60601-1. Heat-resistant cable, HT 90°C, CEI 20-20 and cable N07V-K with section 1.5 / 2.5 / 4 mm² for electrical utilities connection. Line connection terminal block on DIN rail, with equipotential terminal for conductor with max. section of 16 mm². In compliance with UNI EN ISO 11197 and EN 60601-1.

Dimensions

406

LUCECURA LUCECURA Code 9146

Power supply input: DX = right, SX = left Certifications for this product can be downloaded from our website.

Indirect E>76% Direct E>31% Code

Item

Dimensions LxAxH

For 1 bed - Electronic MultiWatt EEI A2 - Lamps not included 9146 New LUCECURA 1x35-49-80 Ind + 1x14-24 DX Dir T5 HF 9147

New

1870x155x241

LUCECURA 1x35-49-80 Ind + 1x14-24 SX Dir T5 HF

1870x155x241

For 2 beds - Electronic MultiWatt EEI A2 - Lamps not included LUCECURA 2x35-49-80 Ind + 1x14-24 DX Dir T5 HF 9150 New 9151

New

3724x155x241

LUCECURA 2x35-49-80 Ind + 1x14-24 SX Dir T5 HF

3724x155x241

For 3 beds - Electronic MultiWatt EEI A2 - Lamps not included 9154 New LUCECURA 3x35-49-80 Ind + 1x14-24 DX Dir T5 HF 9155

New

5598x155x241

LUCECURA 3x35-49-80 Ind + 1x14-24 SX Dir T5 HF

5598x155x241

Installation On 2 beds (*repetitive heights on 3 beds on request) 36W = 1554* 58W = 1864*

450

1700

Healthcare applications

On 1 bed

450

1700

Datasheets, product updates and specifications on our website: www.3f-filippi.com

407

3Fine Germicide Luminaire for sterilisation of environments

Construction characteristics

Source characteristics

Applications

Illuminotechnical characteristics The luminaires are designed for use with linear germicide lamps, 15W or 30W. Indirect irradiation upwards.

The linear germicidal lamps are not supplied. The suitable ones for this product range are: Osram Puritec (HNS 15W G13 - HNS 30W G13) and Philips TUV T8 (TUV TL-D 15W - TUV TL-D 30W).

Suitable for installation in environments to be sterilised thanks to the lamps’ UV action which destroys bacteria, viruses, germ spores and moulds. Direct exposure to this type of radiation can cause skin flammation or irritation of the eyes and mucous membranes.

Mechanical characteristics Single-piece pressed steel housing, phosphate degreasing treatment using iron salts, electrophoresis painted in white oven dried enamel. Parabolic flux recuperator in semispecular anodised aluminium necessary to obtain maximum irradiation.

Installation Direct wall-mounted. It is recommended you install the luminaire with the lamp in the lower part (see diagram in dimensions box), at a height no less than two metres from the floor, so that the rays do not irradiate the normal field of vision of those working in the environment.

Electrical characteristics EEI B2 low loss starter wiring, 230V-50Hz, power factor correction, fuse. In compliance with EN 60598-1.

Dimensions

408

3Fine Germicide 3Fine Germicide

Code

Item

Absorbed power (W)

Sources flux (lm)

Dimensions LxAxH

Starter EEI B2, fuse - Lamps not included 1949 3FI GER 1x15

519x90x197

1950

952x90x197

Healthcare applications

3FI GER 1x30

Datasheets, product updates and specifications on our website: www.3f-filippi.com

409

410 41 4 10

Datasheets, product updates and specifications on our website: www.3f-filippi.com > Products > Light Management

Light Management Page 412

Overview

3F Easy Dim Page 414

Overview

415

Installation examples

416

Accessories

3F Sensor Page 418

Overview

419

Technical details 3F Sensor / 3F Sensor CF

3F Smart Dimming Page 420

Overview

421

Installation Reference - Corridor Function

422

Installation Reference - Office / Open space

423

Installation Reference - Industrial / Gymnasiums

424

Installation Reference - School classroom

425

Accessories

3F HCL Page 428

Overview

430

Technical details

431

Accessories

3F & KNX Page 432

Overview

3F CLO Page Overview

Light Management

433

411

Light Management Good for you, excellent for the environment.

3F Filippi is always at the forefront of energy savings and improving the efficiency of systems: this is why we are constantly striving to create luminaires which are able to interact with environments and with the people who live and work there. One of the most important aspects of managing workplaces is certainly the lighting: it is indeed proven that poor illumination is not only harmful to workers, but creates both direct (higher power consumption or waste) and indirect (worker illness, decreases in productivity, stress or even physical issues) economic problems. Good lighting may often seem difficult to obtain, but in reality small measures can obtain big results. Here are three useful tips: • Let in the sun: natural light improves quality of life and saves you money! • Use low-energy sources: luminaires fitted with fluorescent and LED sources are the best weapons in cutting costs, especially when they are optimised like those manufactured by 3F Filippi. • Use luminaires with luminous fluxes which can be regulated according to requirements: dimming the luminaires lets you lower electricity consumption by up to 80%, at the same time creating a more pleasant and functional working environment Systems which are able to regulate the artificial lighting on the basis of the available natural light can be created, using only the power required to maintain an appropriate level of lighting in the environment, allowing you to save up to 80% on electricity bills. After performing analyses alongside lighting designers, we noticed that adopting control systems which can regulate lighting on the basis of the available natural light provides wide margins for improving the energy efficiency of systems, particularly during the summer months. Adopting systems such as KNX - which can also be used throughout the building for automating all types of systems (HVAC, lighting, opening, blinds etc.) - combined with measurement of the natural light level provides excellent results, in part due to intelligent positioning of light measurement sensors in relation to the position of the workplace and geographical orientation. 3F Filippi offers light regulation systems to help you save energy and protect the environment: from manual regulation systems to luminaires able to turn on and off thanks to integrated brightness and presence sensors, energy management systems linked to building automation, right through to components which help you to create made-to-measure lighting installations with ease. 3F Filippi is at your side to offer you the best solutions both for your environment and your workers.

412

Light Management 3F Smart Lighting 3F CLO

3F & KNX

Automatic regulation system which compensates for the decline in luminous flux, providing a constant level of lighting over time.

Characteristics and luminaires able to interface with KNX, the standard for automated remote management of the technological systems of a building.

3F Easy Dim

3F HCL

Manual regulation systems which allow you to adjust the luminous flux of the luminaires.

Check for the variation of the white light colour temperature which follows the natural cycle of the light.

3F Sensor

3F Smart Dimming

Automatic system for turning luminaires on and off thanks to integrated presence and brightness sensors.

Components for creating luminous flux regulation systems with examples divided by sector of application.

These lighting management systems comply with UNI EN 15232 "Energy performance of buildings. Impact of Building Automation, Controls and Building Management" which introduces four energy efficiency categories for the control functions of building technical systems. Introducing 3F Smart Lighting control and light management systems - even in systems already equipped with high-efficiency light sources - can provide significant further energy efficiency improvements. A great advantage of automated systems, like 3F Sensor and 3F Smart Dimming, is that regulation is completely automatic, without any requirement for operators to intervene, ensuring that the systems is constantly adapting itself to the required conditions.

3F Filippi lighting and Smart Buildings

Both for new builds and for existing systems, the costs of implementing these solutions are more than offset by simplification of the electrical wiring and corresponding installation: this reduction in conductors, conduits, power and control switchboards means that the time required to see a return on investment is drastically reduced. Our sales and technical offices are at your disposal to support you in choosing the best solutions available; these can also be customised to the application you require.

Datasheets, product updates and specifications on our website: www.3f-filippi.com

413

Light Management

The results which can be obtained must be combined with correct integration of building and electrical design which can provide the base elements necessary to justify adoption of any automation system.

3F Easy Dim Savings in your hands

Characteristics 3F Easy Dim technology lets you regulate luminous flux in an easy, low-cost and customisable manner. In terms of the system, it is composed of a commercially available push-button (up to 6 ballasts) and a DALI repeater (to manage up to 64 ballasts). This mode allows you to perform the following functions: • Turning the luminaire ON/OFF • Manual regulation of the luminaire's luminous flux on the basis of specific requirements.

Advantages The advantage of this technology is that it gives the user the possibility to customise the quantity of light present in the environment depending on taste and requirements, while using genuinely low-cost components. The control provided is manual, and as such savings will depend on how it is managed.

Savings • Installation phase: up to 6 ballasts, controlled via a commercially available push-button. Between 7 and 64 ballasts requires a DALI repeater. • Use: if the luminous flux output is below 100%, power consumption of the luminaire is significantly reduced.

414

3F Easy Dim Up to 6 ballasts

ECG DALI

Push-button ECG DALI

Note: in environments where there is signal interference present, and with dimmer wire lengths of over 20 metres, the installation of a DALI repeater is advisable.

Results obtainable - Manually turning the luminaire ON/OFF - Manual regulation of the luminaire's luminous flux on the basis of user requirements.

Compatible luminaires Any luminaire from the 3F Filippi range, as long as it is equipped with DALI ballast.

Components required - 1 commercial push-button

Up to 64 ballasts

Push-button ECG DALI

DALI REPEATER ECG DALI

Results obtainable Light Management

- Manually turning the luminaire ON/OFF - Manual regulation of the luminaire's luminous flux on the basis of user requirements.

Compatible luminaires Any luminaire from the 3F Filippi range, as long as it is equipped with DALI ballast.

Components required - 1 commercial push-button - 1 DALI repeater

Datasheets, product updates and specifications on our website: www.3f-filippi.com

415

3F Easy Dim Accessories Signal Repeater for expansion of DALI systems (64 drivers - 300 meters of line), size 189x30x21 mm, integrated installation into the device or into the Box (cod. A3010). Code

Item

A3008 New

Repeater DALI ext

Signal Repeater for expansion of DALI systems (64 drivers - 300 meters of line), size 96x72x62 mm, DIN rail mounting. Code

Item

A3009 New

Repeater DALI DIN

Box mounted housing DALI Repeater ext (cod. A3008), size 261x71x27 mm.

416

Code

Item

A3010 New

Box for Repeater DALI

Light Management Datasheets, product updates and specifications on our website: www.3f-filippi.com

417

3F Sensor A small revolution bringing you big advantages. Characteristics Sensor technology allows you to make savings and manage your lighting systems in an easy, low-cost and customisable manner without investing significant capital in costly systems. What we have done is really very simple: we have included what was previously outside the luminaire, inside it. This means that the products in this range have functions such as: • Turning on the luminaire on the basis of the chosen level of brightness • Turning on the luminaire when there are people in the luminaire's operating range • Manual regulation of the luminaire's on time, on the basis of specific requirements.

Advantages The advantages of this technology create significant savings for the end customer: • Time savings during installation: integrating these functions inside the luminaire means it is no longer necessary to install a network of sensors (and corresponding wiring) and connect it to the luminaires • Cost savings: you save money on installation time, electrical supplies and system calibration time. • Ease of installation: it is no longer necessary to create or modify electrical systems. Just connect the luminaires to the mains • Customisation of brightness levels: each luminaire "works" independently from the others, allowing you to create "made to measure" lighting You can think of products equipped with Sensor technology as independent units which are able to work together in a network, even though they are not physically connected.

Savings In practical terms, the advantages are real and tangible in these aspects for the end customer: • Installation: To create a network of luminaires, it is no longer necessary to connect them physically; this means you no longer have to spend extra for wiring supplies and installation time. • Independence and precision: Each luminaire is independent; this means that lights turn on in an increasingly localised and precise manner, with corresponding electricity savings. • Simplicity: Dimming and presence sensors are integrated and already operational. All that is left for you to do is to connect the phase, neutral and earth wires: wasting time setting up and adjusting the system is a thing of the past! • Integration with existing installations: the same lighting connections, using standard electrical wiring: this means not wasting money adapting the systems.

3F Sensor: saves you money even before the light is turned on. Versions Standard position Automatic Mounting height Adjustment of twilight function

Sensor

Corridor Sensor Function

Luminaire off

Kept on at 10% power

Via set light level and presence sensor Wall installation at max 2.7 metres - Ceiling installation at max 4 metres Daylight / 300 lux / 150 lux / Twilight / Night / Programmable mode

On time adjustment

From 10 seconds to 30 minutes

Adjustment of the detection level of the sensor

20% - 30% - 50% - 75% - 100%

418

3F Sensor Sensitivity

Luminaire wall installation

up to 10 m

Luminaire ceiling installation

2.6 m

1.8 m up to 10 m

3F Sensor Results obtainable - Luminaire ON/OFF via relay sensor - Activation of the luminaire's luminous flux depending on the amount of natural light and/or presence of personnel

Available luminaires 3F Petra LED Sensor, 3F Linda LED Sensor

Operation graph Legend:

100%

T1 > T2 - latency time managed by the sensor - adjustable T2 > T3 - period of zero luminous flux - unlimited time 0% time

presence

3F Sensor CF Results obtainable - Luminous flux of 10% at rest, 100% flux when presence is detected via relay sensor - Activation of 100% of luminous flux depending on the amount of natural light and/or presence of personnel

Available luminaires L 320 LED Sensor CF, 3F Linda LED Sensor CF

Operation graph 100%

Legend: T1 > T2 - latency time managed by the sensor - adjustable T2 > T3 - latency time managed by the driver - 120 seconds T3 > T4 - luminous flux decrease time - 32 seconds T4 > T5 - period of minimum luminous flux - unlimited time

10% 0% time

T3 T4

Light Management

presence

3F Sensor Standard position: the power output of the luminaires is dimmed to 10%, thus obtaining a minimum level of lighting.

Datasheets, product updates and specifications on our website: www.3f-filippi.com

As soon as the luminaires detect the presence of persons, or the level of natural light falls below a minimum set threshold, the CF function is activated and they switch to 100% power output for the set duration (this can be regulated during installation).

419

3F Smart Dimming

Characteristics Smart Dimming technology allows you to make savings and manage your lighting systems in an easy, low-cost and customisable manner without investing significant capital in costly systems. Products in this range have functions such as: • Turning on and automatically regulating the luminaire on the basis of the chosen level of brightness • Turning on the luminaire when there are people in the luminaire's operating range • Manual regulation and ON/OFF via accessory remote controls or push-buttons

Advantages The advantages of this technology offer significant energy savings for the end customer, calculated as being up to 80% compared to an on-off solution. It is also possible to create made-to-measure lighting based on the requirements of the environment and the light level required.

Savings In practical terms, the advantages are real and tangible in these aspects for the end customer: • Quick, simple installation • Energy savings • Reduced time to see return on investment

420

3F Smart Dimming Installation Reference - Corridor Function Results obtainable • Luminous flux of 10% at rest, 100% flux when presence is detected via relay sensor • Activation of 100% of luminous flux depending on the amount of natural light and/or presence of personnel

Compatible luminaires Any luminaire from the 3F Filippi range, as long as it is equipped with DALI ballast with Corridor Function (to be specified when ordering).

Components required • Luminaire with DALI driver with Corridor Function • IR adaptor for Smartphones (optional) • 1 on-off Sensor A or 1 on/off-ext Sensor A (range of operation 10 metres) or • 1 on-off Sensor B or 1 on/off-ext Sensor B (range of operation 24 metres)

Wiring diagram

ECG DALI

ECG DALI Sensore di presenza ON-OFF

100%

Legend:

10% 0% time

Light Management

Operation graph

T3 T4

T1 > T2 - latency time managed by the sensor - adjustable T2 > T3 - latency time managed by the driver - 120 seconds T3 > T4 - luminous flux decrease time - 32 seconds T4 > T5 - period of minimum luminous flux - unlimited time

presence

Datasheets, product updates and specifications on our website: www.3f-filippi.com

421

3F Smart Dimming Installation Reference - Office / Open space Up to 50 ballasts - Installation height up to 4 metres Results obtainable • Manual ON/OFF/regulation of the luminaire via optional remote control or push-button • Automatic regulation of the luminaire’s light flow depending on the amount of natural light and/or presence of personnel

Compatible luminaires Any luminaire from the 3F Filippi range, as long as it is equipped with DALI ballast. On request, can also be implemented with 1-10V components (drivers and sensors).

Components required • 1 commercial push-button • Luminaire with DALI driver • 1 DALI Sensor A (recessed) or DALI ext Sensor A (ceiling mount) • IR adaptor for Smartphones (optional) • IR programmer (optional) • IR remote control (optional)

Wiring diagram

ECG DALI Push-button

ECG DALI Sensore

Note:to deactivate presence sensing, R and L must be short circuited directly on the sensor.

422

3F Smart Dimming Installation Reference - Industrial / Gymnasiums Up to 50 ballasts - Installation height between 4 and 9 metres Up to 50 ballasts - Installation height between 4 and 9 metres

Results obtainable • Manual ON/OFF/regulation of the luminaire via optional remote control or push-button • Automatic regulation of the luminaire’s light flow depending on the amount of natural light and/or presence of personnel

Compatible luminaires Any luminaire from the 3F Filippi range, as long as it is equipped with DALI ballast. On request, can also be implemented with 1-10V components (drivers and sensors).

Components required • 1 commercial push-button • Luminaire with DALI driver • 1 DALI Sensor B (recessed) or DALI ext Sensor B (ceiling mount) • IR adaptor for Smartphones (optional) • IR programmer (optional) • IR remote control (optional)

Wiring diagram

ECG DALI Push-button

ECG DALI

Light Management

Sensore

Datasheets, product updates and specifications on our website: www.3f-filippi.com

423

3F Smart Dimming Installation Reference - School classroom Up to 50 ballasts Results obtainable • Manual ON/OFF/regulation of the luminaire via optional remote control or push-button • Automatic regulation of the luminous flux of the luminaires in a differentiated manner depending on the natural light present in two different areas: a single sensor measures the brightness at two points (for example, near the window and in the darkest area of the classroom), and adjusts the fluxes of the luminaires lighting those areas as a consequence

Compatible luminaires Any luminaire from the 3F Filippi range, as long as it is equipped with DALI ballast. On request, can also be implemented with 1-10V components (drivers and sensors).

Components required • 1 commercial push-button • Luminaire with DALI driver • 1 Dual-DALI Sensor B • IR adaptor for Smartphones (optional) • IR programmer (optional) • IR remote control (optional)

Wiring diagram

ECG DALI

Channel 1

ECG DALI

Channel 2

Push-button

Sensore

Note:to deactivate presence sensing, R and L must be short circuited directly on the sensor.

424

3F Smart Dimming Accessories Presence detector 230 can be controlled remotely, circular detection area Ø10m, with Master feature. Integrated light sensor. Available in recessed and surface-mounted version (ext). IP20 for recessed version. IP54 (visible part) for the “ext” surface-mounted version.

Code

Item

A3013 New

Sensor A on/off

A3014 New

Sensor A on/off-ext

On request, kit to obtain a protection degree of IP54 (for “ext” version only).

Presence detector 230 can be controlled remotely, circular detection area Ø24m, with Master feature. Integrated light sensor. Available in recessed and surface-mounted version (ext). IP20 for recessed version. IP54 (visible part) for the “ext” surface-mounted version.

Code

Item

A3018 New

Sensor B on/off

A3019 New

Sensor B on/off-ext

On request, kit to obtain a protection degree of IP54 (for “ext” version only).

Presence detector with remote control, circular detection area Ø10m, with master and DALI interface function. Integrated light sensor for automatic constant light control. Drive up to 50 digital electronic driver groups. Available in recessed and surface-mounted version (ext). IP20 for recessed version. IP54 (visible part) for the “ext” surface-mounted version.

Code

Item

A3011 New

Sensor A DALI

A3012 New

Sensor A DALI ext

On request, kit to obtain a protection degree of IP54 (for “ext” version only).

Code

Item

A3016 New

Sensor B DALI ext

A3017 New

Sensor B DALI

Light Management

Presence detector with remote control, circular detection area Ø24m, with master and DALI interface function. Integrated light sensor for automatic constant light control. Drive up to 50 digital electronic driver groups. Available in recessed and surface-mounted version (ext). IP20 for recessed version. IP54 (visible part) for the “ext” surface-mounted version.

On request, kit to obtain a protection degree of IP54 (for “ext” version only).

Datasheets, product updates and specifications on our website: www.3f-filippi.com

425

3F Smart Dimming Accessories Presence detector with remote control, circular detection area Ø24m, with master function and two DALI interfaces. Two light sensors for automatic adjustment of light constant. Drive up to 50 digital electronic driver groups. Available in the recessed version. Code

Item

A3015 New

Sensor B Dual-DALI

IR remote control programmer, compatible with DALI sensor A, sensor B Dual-DALI and sensor B DALI.

Code

Item

A3020 New

Programmer IR

IR remote control per user, compatible with DALI sensor A, sensor B Dual-DALI and sensor B DALI. Code

Item

A3021 New

Remote controller IR

IR Adapter for Smartphones, compatible with all sensors. Free APP available for Android and iOS devices.

426

Code

Item

A3022 New

IR-Adapter for Smartphone

Light Management Datasheets, product updates and specifications on our website: www.3f-filippi.com

427

3F HCL The difference between seeing and feeling the effect of the Light People and their requirements have always been at the centre of our attention when designing our products. Thanks to the new HCL luminaires, ensuring the comfort and health of the individual finds a new point of reference thanks to a solution which can actively stimulate biorhythms. Natural light is one of the most important sensory stimuli for our body, and it also has an enormous effect on our mental and emotional state. For this reason, HCL luminaires have been designed to replicate natural light, taking the following requirements into consideration: • Dynamism of light over time • Dynamism of colour temperature over time • Symmetrical light diffusion • Freedom of use for each individual The latest research in the sector has shown that those who work in environments with windows and good lighting are exposed to 173% more natural light during working hours and sleep on average 46 minutes longer (each night) compared to others, as they are less affected by problems such as insomnia. The result is a general increase in well-being. There is ever-increasing evidence to support the fact that exposure to light during the day, particularly during the morning, is beneficial to health in terms of its effects on mood, mental lucidity and the metabolism:

Hospitals

Schools

In healthcare facilities, Human Centric Lighting can:

In schools, Human Centric Lighting technology can significantly improve concentration and cognitive performance. A 45% reduction in errors and a 9% improvement in cognitive speed have been demonstrated.

• reduce sleep disturbances, thus limiting the need for drugs and reducing medical assistance requirements • improve patient well-being and activity during the day

Technology

HCL Offices

3F Filippi

In offices, Human Centric Lighting technology can increase employees' motivation and energy, improving day-to-day productivity, particularly in the period after lunch. What's more, in environments without natural light, it can help recreate daily biorhythms.

Commercial Premises

In commercial situations, Human Centric Lighting offers the possibility to diversify light distribution and colour on the basis of scenarios linked to the products or concepts being presented. This provides a flexibility of use at each point of sale which offers savings in terms of time and money.

Individual well-being is strictly personal, and so this luminaire is managed by a control unit (external and not included with the product) which provides everyone the possibility to create "their own light cycle" which best meets their requirements. If you require more information, do not hesitate to contact our Sales Network or our Technical Offices.

428

3F HCL Light influences mood and can trigger both positive and negative emotions. Biological Effects

HCL luminaires provide users with the possibility to change both intensity and temperature of the emitted light, thus improving comfort and increasing the feeling of well-being.

Emotional Effects

A third photoreceptor in the human eye was discovered in 2001, which is responsible for our light response for regulating our biological clock and circadian rhythms. Recent studies (performed by Lighting Europe) have shown that HCL luminaires improve concentration as well as the safety and efficiency of the workplace or training and school environments. For this reason, 3F Filippi has decided to create a series of new luminaires to help people feel better by putting their requirements at the centre of the design, also from a biological point of view.

Biological Effects

In order to take proper advantage of these luminaires, it is essential that: • The artificial light follows the cycle of the natural light • The management systems can also be manually adjusted, according to each user’s sensitivity. • Right from the lighting design stage, factors such as exposure of the environment to natural light, the users’ biological situations and the tasks they must perform are taken into account. • 3F Filippi recommends you always consult a qualified and reliable lighting designer. Biorhythms depend on signals which derive from the quantity and the quality of natural light and the environmental colour temperature:

3000K

4000K

5000K

Stimulation to relax

6500K

Stimulation to be active

The brain is stimulated: • By cold light present during daylight hours (6,500 K) which allows us to be more active and concentrate harder. • By warm light present in the morning and evening (2,700K) which induces greater relaxation. Thanks to HCL technology, everyone can improve their sleep cycles, mental and emotional states by themselves.

HCL technology allows for:

Lighting which follows the natural daylight cycle.

Less environmental stress reduces physical and mental exertion.

Automatic and/or manual management of the light intensity and colour temperature.

Light Management

Comfort and well-being, particularly in environments in which a lot of time is spent.

Characteristics: • Control for variation of the white colour temperature (Tunable-white) • Simulated changing of daylight over the course of the day • Modulation of the colour temperature along the Planck curve from 2700K to 6500K • Colour rendering index CRI >85 • Colour tolerance: 3 MacAdam ellipses • LED source luminous efficiency - up to 155 lm/W

Datasheets, product updates and specifications on our website: www.3f-filippi.com

429

3F HCL The difference between seeing and feeling the effect of the Light

Manual control Results obtainable • Manual ON/OFF • Manual control of colour temperature

Compatible luminaires L 320 LED HCL, L 390 LED HCL, 3F Travetta LED HCL

Components required 1. 2 commercially available push-buttons (1 for regulation of the colour temperature and 1 for regulation of the brightness) 2. 1 HCL Basic Controller (code A3001)

Automatic control Results obtainable • Manual or automatic ON/OFF • Automatic control of colour temperature which follows circadian rhythms with programming via a free APP (available for iOS and Android) • Manual control of the colour temperature via pushbuttons or Touch Panel

Compatible luminaires L 320 LED HCL, L 390 LED HCL, 3F Travetta LED HCL

Components required • 1 HCL Plus Controller (code A3002) • 1 HCL Touch Panel (code A3003) or alternatively 1 Clock Modulo (code A3004) optional components • 2 commercially available push-buttons (1 for regulation of the colour temperature and 1 for regulation of the brightness)

430

3F HCL Accessories Controller for manual adjustment of the color temperature, size 130x30x21 mm. Code

Item

A3001 New

Controller HCL Basic

Controller for automatic adjustment of the color temperature (circadian cycle), dimensions 130x30x21 mm. To be used in combination to the Clock Module (cod. A3004) or Touch Panel HCL (cod. A3003).

Code

Item

A3002 New

Controller HCL Plus

Automatic Interface with touch-sensitive monitor with on / off function, color temperature adjustment, light intensity and on / disattivaizone of the circadian cycle, even from smartphones manageable.

Code

Item

A3003 New

Touch Panel HCL

Automatic Interface (only manageable with buttons) with on / off function, color temperature adjustment, light intensity and on / disattivaizone of the circadian cycle, even from smartphones manageable.

Item

A3004 New

Clock Module

Light Management

Code

Datasheets, product updates and specifications on our website: www.3f-filippi.com

431

3F & KNX Networking has never been so easy.

3F & Characteristics KNX is a worldwide open standard which meets the most important European and international standards and offers automated and decentralised management of technological systems for: commercial, industrial, public and office buildings, schools and many other structures besides. KNX can be used in all applications and for control functions in buildings: from lighting to blinds, security, HVAC supervision, control of plumbing and alarms, energy management, electricity meters, domestic appliances, audio systems etc. KNX improves comfort and security, as well as providing a strong contribution to energy savings (up to 50% for lighting and heating management) and to reducing environmental impact. The KNX system can be used both in new and existing buildings. KNX installations can be easily expanded and adapted to meet new requirements, quickly and with minimal financial investment (for example when new tenants enter a commercial building). Example connection diagrams:

ECG DALI

Gateway DALI/KNX ECG DALI

3F Filippi really believes in this standard, and it is for this reason that we offer a range of luminaires equipped with DALI ballasts which are able to interface with KNX systems seamlessly: the connection between the network and the luminaire occurs via gateways which allow information and commands to be transmitted via the LAN network.

432

3F CLO Time passes, the light stays the same

Introduction LED light sources, unlike traditional lighting, do not tend to suddenly blow at the end of their lifetime; LEDs rather have a gradual reduction of their luminous output overtime before running out after a very long time. The percentage decline of the luminous flux with reference to the useful number of operating hours (50,000 hours) is therefore determined with the parameter “L”. 3F Filippi LEDs, classified as L85 (*), will still supply 85% of their initial luminous flux after 50,000 hours. 100% 90% 80% 70%

(*) data extrapolated from LM-80 (IES - Illuminating Engineering Society of North America) tests, performed as per standards after 6,000 hours of operation and calculated on the basis of the IESNA TM-21-11 guideline "Projecting Long Term Lumen Maintenance of LED Light Sources"

60% 50%

Luminous flux

40% 30% 20% 10%

Lifetime

50,000 hours

3F Filippi offers the Constant Light Output (CLO) system, which is able to offset the decrease in luminous flux of the LEDs and avoid the flux/power peak closer to installation by keeping the required lighting values constant over time. The drivers are programmed to supply the LEDs with reduced power over the first few years, gradually increasing the power over time as necessary to offset the reduction in luminous flux of the LEDs. This system, as well as maintaining a constant level of lighting over time, provides energy savings of around 15% in the first few years of the product's lifetime (an average of around 10% over the entire useful lifetime of the product).

Luminaires which can be equipped with CLO technology (with DALI driver) • L 320 LED • 3F Travetta LED • 3F Linux • 3F Cub LED • 3F LEM • Beta i3F LED

Datasheets, product updates and specifications on our website: www.3f-filippi.com

433

Light Management

In order to guarantee the minimum lighting levels required by standards, the illuminotechnical testing is performed using LED luminous flux values which are reduced by the maintenance factor which takes into account the decrease in this flux at 50,000 hours. This means that the system, from the first hours of its life until it reaches 50,000 hours, will guarantee greater lighting levels than those required and will consume more power than necessary, wasting 15% of energy in the first years of operation (around 10% on average throughout its useful lifetime).

43 434 4 34

News and updates available on: www.3f-filippi.com > Infopoint

Infopoint 3F LED Technology Page 436

3F LED Technology

438

Photobiological safety

440

Aspects to consider when choosing an LED luminaire

442

Glossary

444

LED luminaire luminous fluxes in Emergency mode

Lighting engineering Page 446

Lighting engineering

447

Lighting laboratory

448

Assil Quality

449

Lighting engineering calculation software

451

UNI EN 12464-1 - Illumination of indoor workplaces

455

UGR - Unified Glare Rating: glare control

456

Description of louvres

457

Fluorescent lights luminous fluxes

Electrical engineering and Electronics Page 460

Electrical engineering and Electronics

460

Electrical engineering laboratory

461

High-quality electronics

462

Electronic wiring characteristics

463

Dimmable electronic wiring characteristics

464

Starter wiring characteristics

465

Emergency wiring characteristics

466

Electrical engineering: Marks and Standards

Mechanics Page 467

Mechanics and Design

468

Mechanics: Marks and Standards

469

Resistance to corrosive substances

Analytical guide 470

Standards for correct use of products

471

Analytical guide

Datasheets, product updates and specifications on our website: www.3f-filippi.com

435

Infopoint

Page

3F LED Technology The real revolution is simplicity

3F LED Technology Easy.

Introduction The LED is one of the most extraordinary inventions of recent times, and not just in the lighting sector. If you needed any evidence that interest in this technology is huge, just try searching for “LED” in Google – you will get nearly half a billion (496 million) hits! Unfortunately, there is an equal amount of confusion surrounding the topic. 3F Filippi has put more than 60 years of experience in the field to work alongside its designers to create its new LED product line. And the difference is plain to see: in a market full of efficient light sources which is evolving and developing from one day to the next, 3F Filippi has decided to equip its luminaires with sources manufactured using the highest quality components available. Unfortunately, one of the most common problems for lighting designers is the lack of a common standard to regulate how lighting companies advertise the performance of their products: these "tricks" hinder comprehension and comparability of products. For this reason, we have decided to shed light on the matter with this guide, by explaining LEDs and their most important characteristics simply yet exhaustively. Another step taken by 3F Filippi in this direction is the voluntary certification of our product data through compliance with the Assil Quality project (see specific chapter for more information). It is important to remember that the original technical features of LED lighting will change according to the operating conditions of each luminaire, and as such, it is incorrect to assume that every LED has the same characteristics in terms of service life, decrease of luminous flux (L) life expectancy (B), etc.

436

3F LED Technology What is an LED? LEDs are electronic components which emit light when an electrical current passes through them – the name, indeed, is an acronym for Light Emitting Diode. This is possible thanks to the optical properties of some semiconductors which emit photons when current is passed through them. When a group of LEDs are installed on a printed circuit, this is known as an LED module. These modules can be of different shapes:

linear

circular

compact

square

What are the advantages of 3F LED technology? Illuminotechnical

Environmental

For the customer

• High luminous efficiency LED, up to 200 lm/W • Immediate on • Control of the light flow, directed light • Absence of IR and UV components throughout the entire spectrum • Very long lifetime, > 50,000 hours (professional range) • Lower power than traditional light sources with equal light output • Increased brightness • Adjustment of luminous flux from as low as 1%

• Mercury free • Lower CO2 emissions thanks to lower power • Less use of polluting materials in LED production • Less heat lost to the environment

• Reduction of energy costs • Reduction of maintenance costs • Fast return on investment

Comparison chart between luminaires of the same length Total luminaire power

Total energy consumption

Annual saving

2x58W Fluorescent Wiring low-loss EEI=B2

141W

102 €

2x58W Fluorescent Wiring EEI A2 electronic wiring

109W

78 €

-24%

2x30W LED wiring ballast

68W

49 €

-52%

2x22W LED electronic wiring

50W

36 €

-65%

Datasheets, product updates and specifications on our website: www.3f-filippi.com

437

Infopoint

Table supposes electricity cost of €0.18 per kWh and total annual operation of 4,000 hours.

LEDs: photo-biological safety Is LED technology safe for health?

Introduction Among 3F Filippi’s top priorities is the well-being of those who are illuminated by our products. For this reason, we pay a great deal of attention to photo-biological safety, using the best sources with a low impact on human health. Unfortunately, some less scrupulous manufacturers use low-quality sources during prolonged exposure, emit radiation which is damaging to organs of the human body, such as the eyes and skin. On the amount of radiation emitted from all sources in the range of wavelengths from 200 nm to 3000 nm. A number of Photo-biological Safety Risk Groups (IEC62471) have now been defined, providing a clear indication of the limits of maximum exposure for each group.

Risk classes In accordance with Paragraph 6.1 of EN 62471: 2010, the risk groups (for blue light) are defined as follows: • RG 0 (Risk Exempt): The source does not cause any photo-biological risk. Requirement met by any lamp that does not cause a blue light (BL) retinal risk with an exposure time of up to 10,000 s (about 2.8 h). • RG1 (Low Risk): The source does not cause risk due to normal operating limitations on exposure. Requirement met by any source that exceeds the limits of the Exempt Group but does not cause a blue light (BL) retinal risk with an exposure time of up to 100 s. • RG 2 (Moderate Risk): The source does not cause a risk due to an instinctive reaction when looking at very bright light sources (or due to a sensation of thermal discomfort.) Requirement met by any source that exceeds the limits of Risk 1 Group but does not cause a blue light (BL) retinal risk with an exposure time of up to 0.25 s (aversion response). • RG 3 (High Risk): The source can constitute a risk even due to momentary or brief exposure. • Sources that exceed the limits of Risk Group 2 are included in Risk Group 3.

438

LEDs: photo-biological safety Notes The current standard EN 60598-1 concerning indoor luminaires indicates that RG0 or RG1 risk groups are acceptable for safety purposes. With the publication of standard EN 60598-1: 2015 (Luminaires - Part 1: General requirements and tests), the acceptable levels for safety purposes were definitively established. In Paragraph 4.24.2 (Blue light retinal risk), the following is indicated: “For luminaires that use light sources from risk group RG0 (unlimited) or RG1 (unlimited), in accordance with IEC/TR 62778, or which have been judged as being finished products ready for use, belonging to risk group RG0 (unlimited) or RG1 (unlimited) , the requirements concerning blue light retinal risk do not apply.” For luminaires that have an ETHR illuminance threshold, evaluated in accordance with IEC/TR 62778, additional requirements are applied for evaluating how far the product is from the threshold between RG2 and RG1. In such cases, although the luminaire cannot be considered to be dangerous, warnings and markings are used to alert the installer or user to the possible risks associated with direct and prolonged viewing of the source. From a technical perspective, RG0 and RG1 groups cannot be said to be equivalent, or to be both considered as "exempt". The two photo-biological risk groups are in fact distinguished as follows: • RG 0 (Risk Exempt): The source does not cause any photo-biological risk. • RG1 (Low Risk): The source does not cause risk due to normal operating limitations on exposure. Currently, therefore, there is no regulation that declares the various photo-biological risk groups to be equivalent, or indeed that united them, rendering both exempt. Exposure to RG1-group luminaires is not considered dangerous under ordinary conditions of use, due to the fact that periods of exposure of over 100 seconds are considered to be "unlikely", although not impossible, as this cannot be predicted in the design phase. Risk group RG0, on the other hand, allows for a longer period of exposure, only warning against periods of over 2.8h: As such, it can be said with greater confidence that it is highly unlikely that a device of this category would be directly viewed for this long. The demand for RG0 light sources could be considered redundant, but it is not stated anywhere that it is prohibited to request the use of RG0 luminaires, or that these can be considered equivalent to those belonging to the RG1 risk category. As explained above, the RG0 risk group represents a cautionary, optimal class of light source. A company that exhibits extra caution with regard to the safety of its operators, and decides to install equipment belonging to the riskexempt RG0 category, could therefore be seen to be excessively conservative, but cannot certainly be criticised for having requested compliance with a parameter that provides greater safety for all involved.

Datasheets, product updates and specifications on our website: www.3f-filippi.com

439

Infopoint

European legislation states that companies, specifically the statutory employer, evaluate and manage risks to workers' health and safety. Among the risks that the employer must evaluate is any photobiological risk deriving from exposure to artificial optical radiation. The reference standard is IEC/EN 62471:2010, which does not define a threshold marking safe from unsafe, but rather defines classification of sources into risk groups. Limitations of use or warnings for the user are contained in the corresponding product standards, while a product marking guide is contained in IEC TR 62471-2:2009.

3F LED Technology What are the aspects to consider when choosing an LED luminaire? Reference standards When studying and designing products, 3F Filippi refers to the most recent specific reference standards: IEC 62722-2-1 Luminaire performance - Part 2-1: Particular requirements for LED luminaires IEC 62717 LED modules for general lighting - Performance requirements IEC 121 The Photometry and Goniophotometry of Luminaires IEC TR 62778 Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires IEC EN 62471 Photo-biological safety of lamps and lamp systems IEC EN 60598-1 Luminaires: General requirements and tests REGULATION (EU) No. 1194/2012 sets out the rules for the application of European Parliament and European Council Directive 2009/125/EC on the specifics of environmentally-friendly design of directional lamps, lamps with light-emitting diodes and other relevant equipment.

Ideal operating temperature In order for LED modules to be able to function correctly and ensure a long lifetime (>50,000 h), a limited drop in luminous flux over time (>L85) and high luminous efficiency (>140 lm/W), they must be able to correctly dissipate the heat they generate. The rated data for LEDs applies only if the junction temperature (Tj) is not exceeded. For this reason, at 3F Filippi , we perform a series of thermal and illuminotechnical tests on our LED luminaires, which allow us to achieve the best combination of heat dissipation, luminous flux and rated power.

Luminous flux and LED performance temperature "tp" (IEC 62717) The junction temperature (Tj) is the temperature inside the LED, and is useful for indicating the performance temperature (Tp) of the LED, to which reference is made when indicating data relating to the luminaire. As the graph on the left shows, the luminous flux emitted by the LED is linked to the performance temperature while in operation (normally between 60°C and 80°C) and falls very fast as the Tp increases. It is very important to highlight that on the market, there are many manufacturers who declare the luminous flux and useful life with a junction temperature Tj 25°C. 100 96 93,2

Luminous flux %

90 85

70°C - 87,7%

86,4

85,0 82,3 79,5

80 75

72,7

71,4

70 65

65,9

60 55 50 25°C

50°C

75°C

100°C

Junction temperature (°C)

440

125°C

150°C

This indication is not correct, because it does not refer to the actual operation of the product. This is clear when you consider that standards require the measurements to be taken at an ambient temperature (Ta) of 25°C – this would mean that the LED does not technically produce any heat - a physically impossible condition. 3F Filippi advises you be wary of luminaires which do not provide for correct heat dissipation and recommends that you request information on life expectancy, lifetime and luminous flux from measurements on luminaires which are running and thermally stabilised. The performance of 3F Filippi luminaires is achieved with a room temperature (Ta) of + 25°C as required by the standard IEC 62722-2-1. Conversely, the performance of the LEDs used in 3F Filippi luminaires is achieved with an operating temperature (Tp) of + 60°C to + 80°C, as required by the standard IEC 62717.

3F LED Technology Thermal management LED junction temperature

Tj 25°C

Tj 60°C

Lumen

1000

950

Efficiency

178 lm/W

169 lm/W

Useful life (@50.000h)

L 100

L 85

Life expectancy

B 10

To increase LED luminaires’ reliability to the maximum, correct thermal dissipation is essential. The temperature is fundamentally important as it influences the luminosity and lifetime of the LED component. 3F Filippi pays great attention to this factor and as a result we develop luminaires which ensure optimum heat dissipation. To the left, a chart that correlates the performance values at different junction temperatures Tj (the operating temperature).

Colour rendering index (CRI) The colour rendering index is an important parameter for the performance of a light source, and evaluates the source's ability to provide an accurate perception of an object's real colours. All LEDs used by 3F Filippi have colour rendering Ra>80, with a typical average value of around 85. Where not already provided for, high colour rendering of Ra>90 can be requested on some products.

Colorimetry and light spectrum

Typical light spectrum for traditional sources

Datasheets, product updates and specifications on our website: www.3f-filippi.com

LED sources have a light spectrum with greater uniformity across the whole range of colours. Unlike traditional light sources, LEDs do not have interruptions in colour, thus ensuring complete and muchimproved vision of the entire colour spectrum - very similar to that seen with natural light.

441

Infopoint

Typical LED light spectrum

3F LED Technology Glossary

Luminous flux The luminous flux, or light flow, coming from the luminaire represents the quantity of light actually coming out of the device, as its value is defined having already taken into account the luminous efficiency of the luminaire. Luminous efficiency The luminous efficiency of the luminaire is the most useful parameter for the designer for determining the correct product solution to install as it supplies a practical figure between light emitted and total power consumption of the light. Beware of publications listing higher luminous efficiencies based on the theoretical efficiency of the bare LED (reference temperature 25°C) and not its actual performance when installed inside the luminaire. Relative humidity For correct maintenance and operation of traditional LED modules over time, the maximum permissible humidity on the component is 85%. For specific applications, UR95 LED modules may be required, guaranteeing correct operation at humidity values of up to 95%. Lifetime (L value) As previously mentioned, LED sources, unlike traditional lighting, do not tend to suddenly blow at the end of their lifetime; LEDs rather have a gradual reduction of their luminous output overtime before completely running out after a very long time.

100% 90% 80% 70% 60% 50%

Luminous flux

40% 30% 20% 10%

Lifetime

442

50,000 hours

The percentage decline of the luminous flux with reference to the useful number of operating hours (usually 50,000 hours) is therefore determined with the parameter “L”. L85: 50000h refers to the fact that the at 50,000 hours of operation, the LED module still provides 85% of the initial luminous flux. We should clarify that this parameter is strongly influenced by the operating conditions of the LED inside the luminaire, and the result is therefore a combination of the quality of the component and good research.

3F LED Technology LED life expectancy (B value) In LED ratings the value B, followed by a value normally between 10 and 50, indicates the quality of the component used as it defines the percentage of components which, after the normal 50,000 h has elapsed, maintain their rated luminous flux. An LED with declared values of L85/B10=50,000h indicates that on reaching 50,000h, 90% (B10) of the components will have a residual luminous flux of at least 85% of the initial value (L85). If, in the listed characteristics of the LED luminaire, the value B is not indicated, this is considered to be a B50 device - or in other words, 50% of the LEDs do not guarantee the average useful life value indicated. We should clarify that this parameter is strongly influenced by the operating conditions of the LED inside the luminaire, and the result is therefore a combination of the quality of the component and good research.

equal to or more than 85% of the initial flux less than 85% of the initial flux

LED failure rate (C value) This value indicates the percentage of LEDs which are no longer operational at the end of their lifetime. This value can be indicated with two combinations: • L85/B10/C0: 50,000 hours - indicates that after 50,000 hours, the percentage of LEDs no longer working is 0%. • L85/B10: 50,000 hours - L0/C10: 200,000 hours - indicates that after 200,000 hours, the percentage of LEDs no longer working is 10%. All LEDs used by 3F Filippi have a failure rate C0 after 50,000 hours. If this value is not indicated, it should be considered C0. Imperfection rate (F value) On the basis of new requirements for LED modules, the F value, followed by a value normally between 10 and 50, provides a more detailed indication of the quality of the component used as it defines, as well as the percentage of components which do NOT maintain their declared luminous flux characteristics (B), also the failure percentage of the LED component. Imperfection rate “F” = “B” value + “C” value On 3F LEDs, as the “C” value is 0, the imperfection rate “F” is the same as the life expectancy (“B” value). Colour tolerance (MacAdam ellipses) Measurement of the chromatic co-ordinates performed during production of the LED allows selection (known as Binning) to classify the LEDs on the basis of their chromatic differences. This classification, performed via analysis of the so-called MacAdam ellipses (which express colour deviations on the XY axes), allows constant tonality to be obtained among the individual LEDs in the same group and therefore a uniform vision of the light colouration visible on the product. • With the value 1 there is no chromatic difference between the individual LEDs; • With values 2 and 3 the difference is not visible to the human eye and the LEDs are considered of good quality; • With a value of 4, the difference begins to become visible to the human eye; • As the value increases, the difference is increasingly noticeable, and the type of application will dictate whether these differences in colouration in the LED group used are acceptable or not. 3F Filippi provides both the initial value and the value over time. Indeed, due to the consumption of phosphors present in the LEDs, the colour tolerance can change over time. All LEDs used by 3F Filippi always have an initial colour tolerance value of less than 3 MacAdams, and a colour tolerance value over time of less than 4. Photometric code The photometric code consists of 6 digits and indicates the basic parameters of the quality of light, as per the example:

840/349

means

8 Colour rendering index (CRI) >80

Nominal colour temperature 4000 K

Tolerance of the initial colour (MacAdam): 3

Tolerance of the colour over time (MacAdam): 4

Percentage of luminous flux after 6,000 hours: >90%.

Datasheets, product updates and specifications on our website: www.3f-filippi.com

443

Infopoint

Energy efficiency class The Directive EU 874/2012 regarding the energy labelling of luminaires sold directly to end users stipulates that for all LED luminaires with integrated light sources, the Energy Efficiency Class (EEC) indicated must be as follows: A / A+ / A++. Indicating a precise energy efficiency class means that the luminaire has been assessed as if it were a lamp/source. As such, all 3F Filippi luminaires come with the best Energy Efficiency Class (EEC): A / A+ / A++ (EU 874/2012). .

LED luminaire luminous fluxes and power in Emergency mode Data update: February 2016 The following tables show the percentages of luminous flux of LED luminaires in emergency operation (BLF). These fluxes are the minimum guaranteed during rated autonomy as required by EN 60598-2-22, and are therefore the ones to be used in the design stage. The luminous fluxes specified are REAL values, and refer to the OUTPUT of the luminaire. Code

Item

Recessed Luminaires 21262 L 323x10W LED EP SP 596x596 21263 L 324x10W LED EP SP 596x596 21293 L 322x18W LED EP SP 296x1196 21589 L 323x10W LED EP LGS 596x596 21590 L 324x10W LED EP LGS 596x596 21606 L 322x18W LED EP LGS 296x1196 28829 L 323x10W LED EP 2S 596x596 28847 L 323x10W LED EP 2MG 596x596 36576 Lucequadro LED 2000 EP VS 36579 Lucequadro LED 3000 EP VS 36582 Lucequadro LED 2000 EP VOP 36585 Lucequadro LED 3000 EP VOP 36588 Lucequadro LED 2000 EP SOP 36591 Lucequadro LED 3000 EP SOP 37544 Galassia 220 LED AB 2000 EP VOP 37553 Galassia 220 LED AB 2000 EP VS 37580 Galassia 220 LED AB 3000 EP VOP 37589 Galassia 220 LED AB 3000 EP VS 37752 Galassia 220 LED 2000 EP 37761 Galassia 220 LED 2000 EP VT 37770 Galassia 220 LED 2000 EP VOP 37779 Galassia 220 LED 2000 EP VS 37795 Galassia 220 LED 3000 EP 37804 Galassia 220 LED 3000 EP VT 37813 Galassia 220 LED 3000 EP VOP 37822 Galassia 220 LED 3000 EP VS Waterproof and corrosion-proof 55017 i3F LED 752x30W EP CONC L1565 55083 i3F LED 762x30W EP AMPIO VT L1565 55145 i3F LED 762x12W EP AMPIO VS L655 55147 i3F LED 762x24W EP AMPIO VS L1265 55149 i3F LED 762x30W EP AMPIO VS L1565 55607 i3F LED 752x12W EP AMPIO L655 55609 i3F LED 752x24W EP AMPIO L1265 55611 i3F LED 752x30W EP AMPIO L1565 55677 i3F LED 762x30W EP CONC VT L1565 58567 3F Linda LED 1x12W EP LA L660 58569 3F Linda LED 1x6W EP LA L660 58589 3F Linda LED 1x24W EP L1270 58600 3F Linda LED 2x24W EP L1270 58601 3F Linda LED 2x24W/865 EP L1270 58602 3F Linda LED 2x24W/830 EP L1270 58611 3F Linda LED 1x30W EP L1570 58614 3F Linda LED 1x22W EP L1570 58623 3F Linda LED 2x30W EP L1570 58624 3F Linda LED 2x30W/865 EP L1570 58625 3F Linda LED 2x30W/830 EP L1570 58705 3F Linda LED 1x12W ENP LA L660 58713 3F Linda LED 1x24W ENP L1270 58625 3F Linda LED 2x30W/830 EP L1570 58626 3F Linda LED 2x22W EP L1570 58705 3F Linda LED 1x12W ENP LA L660 58713 3F Linda LED 1x24W ENP L1270 444

Duration

Recharge

BLF Luminaire (%)

BLF Module (%)

Number of modules in Emergency

1h 1h 1h 1h 1h 1h 1h 1h 1h 1h 1h 1h 1h 1h 1h 1h 1h 1h 1h 1h 1h 1h 1h 1h 1h 1h

24h 24h 24h 24h 24h 24h 24h 24h 24h 24h 24h 24h 24h 24h 24h 24h 24h 24h 24h 24h 24h 24h 24h 24h 24h 24h

11,4 8,6 9,5 11,4 8,6 9,5 11,4 11,4 20,0 14,3 20,0 14,3 20,0 14,3 20,0 20,0 14,3 14,3 20,0 20,0 20,0 20,0 14,3 14,3 14,3 14,3

34,3 17,1 19,0 34,3 17,1 19,0 34,3 34,3 20,0 14,3 20,0 14,3 20,0 14,3 20,0 20,0 14,3 14,3 20,0 20,0 20,0 20,0 14,3 14,3 14,3 14,3

1EP+2 2EP+2 1EP+1 1EP+2 2EP+2 1EP+1 1EP+2 1EP+2 1EP 1EP 1EP 1EP 1EP 1EP 1EP 1EP 1EP 1EP 1EP 1EP 1EP 1EP 1EP 1EP 1EP 1EP

1h 1h 1h 1h 1h 1h 1h 1h 1h 1h 1h 1h 1h 1h 1h 1h 1h 1h 1h 1h 1h 1h 1h 1h 1h 1h

24h 24h 24h 24h 24h 24h 24h 24h 24h 24h 24h 24h 24h 24h 24h 24h 24h 24h 24h 24h 24h 24h 24h 24h 24h 24h

5,7 5,7 14,3 7,1 5,7 14,3 7,1 5,7 5,7 28,6 57,1 14,3 7,1 7,1 7,1 11,4 15,2 5,7 5,7 5,7 28,6 14,3 5,7 7,6 28,6 14,3

11,4 11,4 14,3 14,3 11,4 14,3 14,3 11,4 11,4 28,6 57,1 14,3 14,3 14,3 14,3 11,4 15,2 11,4 11,4 11,4 28,6 14,3 11,4 15,2 28,6 14,3

1EP+1 1EP+1 2EP 1EP+1 1EP+1 2EP 1EP+1 1EP+1 1EP+1 1EP 1EP 1EP 1EP+1 1EP+1 1EP+1 1EP 1EP 1EP+1 1EP+1 1EP+1 1ENP 1ENP 1EP+1 1EP+1 1ENP 1ENP

LED luminaire luminous fluxes and power in Emergency mode LED emergency wiring characteristics Wiring created with emergency lighting systems with the following characteristics: • Rigid cables, cross section 0.50-0.75-1 mm² (0.75-1 mm² also class II), heat resistant PVC HT 90°C, IEC 20-20. • Protective fuse, same characteristics as starter wiring. • 230V-50/60Hz electronic inverter with protection against excessive battery discharge. • Sealed Nickel-Cadmium or Nickel-Metal Hydride NiMH. • LED to signal presence of power supply and battery charging. • Recharge time 24 hrs. • Running time = 1h minimum under heaviest working conditions. • 3-pole terminal block with incorporated disconnecting fuse for standard power supply live-earthing-neutral (LTN). • 2 pole terminal block for power supply of the emergency recharging line. • Complies with IEC 60598-1, IEC EN 60598-1 (CEI 34-21) and IEC EN 60598-2-22 (CEI 34-22). • Suitable for rooms with temperature from 0°C to +25°C. On request: • Emergency mode with 3 hours duration, 24 hours recharge, or 1.5 hours duration and 12 hours recharge (according to feasibility), maintaining the same percentage of the standard luminous flux. • Wiring with intelligent control systems and centralised or local self-diagnostics of emergency lighting.

EP LED permanent emergency lighting When power is on, EP luminaires operate like normal luminaires; in the event of power failure, the LED module connected to the emergency lighting system switches on or stays on automatically. In EP luminaires with multiple LED modules, you can check how many modules remain on in emergency mode; for example, 1EP+2 indicates that on a 3x (3 LED modules) luminaire, one remains on in an emergency.

ENP non-permanent emergency LED lighting

Datasheets, product updates and specifications on our website: www.3f-filippi.com

445

Infopoint

In ENP luminaires, the LED module switches on only in emergency mode, when there is a power cut.

Lighting engineering Professional lighting engineering design and free consultancy 3F Filippi supplies its customers with a free lighting engineering design service thanks to the Dialux software which allows them to: • Consult the photometric characteristics of the luminaire in order to establish the correct application. • Calculate and check the level of illumination, luminance, as well as the uniformity over horizontal work surfaces (such as work tops and ceiling), vertical work surfaces (such as walls or inclined virtual planes, vertical walls in the room, etc.) and to perform calculation for irregular layouts. With these results, data sheets can be produced with the values shown in point-by-point, isolux, tables, room surfaces, as well as 2D and 3D views of the environment.

Cliente: Agenzia consulenza finanziaria

0DJD]]LQR ORJLVWLFD

5HGDWWRUH 0DUFR 'DOOH 'RQQH 7HOHIRQR )D[ H 0DLO I ILOLSSL# I ILOLSSL LW

) )LOLSSL 6 S $ 8IILFLR 3URJHWWD]LRQH ,OOXPLQRWHFQLFD 9LD GHO 6DYHQD 3LDQ GL 0DFLQD 3LDQRUR %RORJQD ,WDO\ &) 3 , ,7 5HJLVWUR LPSUHVH GL %RORJQD Q 5($ 1 &DSLWDOH 6RFLDOH (XUR L Y

0DJD]]LQR 5LHSLORJR

Progetto 0

10/09/2015

Area 1 / Seminterrato / Seminterrato / 3F Filippi 58583 3F Linda LED 1x24W L1270 1x24W 1xLED / Scheda tecnica apparecchio (1x24W 1xLED)

3F Filippi 58583 3F Linda LED 1x24W L1270 1x24W 1xLED ILLUMINOTECNICHE Rendimento luminoso 100%. Flusso luminoso dell'apparecchio 3593 lm. Distribuzione simmetrica controllata. UGR <22 (EN 12464-1). Efficienza apparecchio 128 lm/W. Durata utile (L90/B10): 30.000 h. (Tj 60°C) Durata utile (L85/B10): 50.000 h. (Tj 60°C) Sicurezza fotobiologica conforme al gruppo di rischio esente RG0, norma IEC 62471.

Tel: (+39) 051.6529611 3f-filippi@3f-filippi.it

Data: 10/09/2015

3F Filippi S.p.A. Ufficio Progettazione Illuminotecnica Via del Savena, 28 - 40065 Pian di Macina - Pianoro (Bologna / Italy) CF. 01033260371 P.I. IT00529461204 Registro imprese di Bologna n. 01033260371 REA N. 234613 Cap. Sociale Euro 3.000.000 i.v.

Redattore: Marco Dalle Donne

MECCANICHE Corpo in policarbonato autoestinguente V2, stampato ad iniezione, colore grigio RAL 7035. Guarnizione di tenuta, ecologica, antinvecchiamento, iniettata. Schermo in policarbonato fotoinciso internamente, autoestinguente V2, stabilizzato agli UV, stampato ad iniezione, con superficie esterna liscia, apertura antivandalica. Riflettore portacablaggio in acciaio zincato a caldo, verniciato a base poliestere bianco, fissato al corpo mediante dispositivi rapidi in acciaio, apertura a cerniera. Scrocchi a scomparsa filo corpo, in acciaio inox, per fissaggio schermo. Dimensioni: 100x1270 mm, altezza 100 mm. Peso 2,32 kg. Grado di protezione IP65. Possibilità di accesso all'interno dell'apparecchio per addetti ai lavori. Apparecchio a temperatura superficiale limitata. - D Resistenza meccanica IK10 (20 joule). Resistenza al filo incandescente 850°C. Certificato TUV Rheinland-LGA per ambienti alimentari.

Rendimento: 100% Flusso luminoso lampadina: 3593 lm Flusso luminoso lampade: 3593 lm Potenza: 28.0 W Rendimento luminoso: 128.3 lm/W Temperatura del colore: 3000 K

$OWH]]D ORFDOH P $OWH]]D GL PRQWDJJLR P )DWWRUH GL PDQXWHQ]LRQH

9DORUL LQ /X[ 6FDOD

U > @

(P >O[@

(PLQ >O[@

(PD[ >O[@

(PLQ (P

3DYLPHQWR

6RIILWWR

6XSHUILFLH 6XSHUILFLH XWLOH

3DUHWL

6XSHUILFLH XWLOH $OWH]]D 5HWLFROR =RQD PDUJLQH

)),/,33, L ) [ 7 /' +) &5 $03,2 ,3 )),/,33, %HWD ,SHUFRQF [ 7 /' +) &5 97 ,3

105°

90°

75°

60°

60° 160

P [ 3XQWL P

'LVWLQWD ODPSDGH 1R 3H]]R 'HQRPLQD]LRQH )DWWRUH GL FRUUH]LRQH

ELETTRICHE Cablaggio elettronico, 230V-50/60Hz, fattore di potenza >0,90, corrente costante in uscita, classe I. Potenza dell'apparecchio 28 W. ENEC - IMQ. Assil Quality. Temperatura ambiente da -20°C fino a +35°C.

Emissione luminosa 1 / CDL polare

45°

SORGENTE Modulo LED lineare da 24W/840, temperatura di colore 4000 K. Resa cromatica Ra >80. Tolleranza del colore (MacAdam): 3. DOTAZIONE Staffe di fissaggio in acciaio inox. APPLICAZIONI Virtualmente in qualsiasi ambiente compatibilmente con le esalazioni/atmosfere che compromettono l'utilizzo delle materie plastiche. Non idonea su superfici soggette a forti vibrazioni, esposte agli agenti atmosferici e su funi o paline.

45°

320

) /DPSDGD >OP@

) /DPSDGLQH >OP@

3 >:@

30°

15°

cd/klm

7RWDOH 3RWHQ]D DOODFFLDWD VSHFLILFD : Pð : Pð O[ %DVH Pð

C0 - C180

0°

15°

30°

η = 100% C90 - C270

7RWDOH

Tolleranza 10%, tensione 230V-50Hz - ta.25°C, flussi luminosi lampada nominali. 3F Filippi si assume la responsabilità progettuale del presente progetto sulla base dei dati imputati, declinando ogni responsabilità in caso di inesattezza o incompletezza dei suddetti dati

Medium and point-by-point illumination on all surfaces of the environment.

Graphical representations on the surfaces of the environment with the following documents: graph of values, rendering with staggered colours, isolines, tables, etc..

Pagina 1

Product datasheet with indication of the lighting, mechanical and electrical characteristics.

• To make the calculations more precise and create very realistic environments, architectural and furnishing elements can be placed inside the program’s simulation environment. • The software and the 3F Filippi plug-in are available free to designers, installers and electrical distributors. • Updates of photometric files and of the lighting engineering software can be downloaded free of charge from the site www.3F-Filippi.it. • For further information, contact our technical consultants.

Rendering of a calculation environment

446

Lighting engineering 3F Filippi is UNI EN ISO 9001 certified for lighting engineering design too. 3F Filippi guarantees photometric data sheets, according to the latest European and international recommendations and standards, thanks to the support of the photometric laboratory, in line with official European laboratories. The photometric tests are performed by procedures in accordance with the UNI EN 13032, UNI 11356 and CIE 121 standards. 3F Filippi has the most advanced computer programs for research and optimisation of louvres and flow recuperators in order to achieve maximum efficiency and suitable light distribution for the most widely varying applications. This commitment has been recognised and certified by the CSQ (Italian Company Quality Systems Certification) also for the entire phase of lighting engineering design, thus allowing operation under a Quality Assurance system that also covers interior lighting design in accordance with good engineering practice. Our ISO 9001 certification, awarded by CSQ (certificate no. 9130.3FFI) can be viewed on our site - www.3F-Filippi.it - in the "Certifications and Guarantees" section.

3F Filippi, as further guarantee of the quality of its products and care to meet the strictest standards, is a sustainer of the most lighting engineering associations in the world:

AIDI (The Italian Illumination Association) carries out incisive and constant scientific, cultural and technical reporting to spread knowledge of lighting issues. www.aidiluce.it

ASSIL (Italian Lighting Producers' Association) provides technical and normative support for quality and performance improvements of lighting technology on the market, while helping respect people's visual comfort, energyefficiency requirements and environmental protection.

IESNA (Illuminating Engineering Society of North America) is the American lighting body which promulgates lighting engineering standards on the American market for designers, producers and professionals in the sector. www.iesna.org

Datasheets, product updates and specifications on our website: www.3f-filippi.com

447

Infopoint

www.assil.it

Lighting engineering Professional lighting engineering design and free consultancy

3F Filippi pays great attention to lighting designers, and tries to simplify their day-to-day work in any way possible. Indeed, we are convinced that these individuals occupy a central role in the process of improving the quality of lighting, reducing light pollution and wasted energy resources. For this reason, 3F Filippi recommends that lighting projects are carried out by professional, reliable designers who can recommend the best solutions both for you and the environment. Unfortunately, one of the most common problems for lighting designers is the lack of a common standard to regulate how lighting companies declare the performance of LED luminaires: these "tricks" hinder comprehension and the ability to compare products. To combat this phenomenon, 3F Filippi has taken an active role in the Assil working group to create the Assil Quality certification, looking to adopt this in the shortest possible time. The companies involved in this project display great respect for the work of designers and their customers: in recent months the market has been inundated with products of doubtful performance, which are not supported by reliable laboratory measurements. This self certification, which is voluntary for manufacturers, makes performance data for LED modules and luminaires comparable, reliable and reproducible. The self-certified declaration is performed via dedicated forms (based on IEC and EN standards), and is designed to provide the market with comparable information to help improve the levels of quality and safety of products placed on the market. Thanks to Assil Quality Certification, designers can download the general data sheets for products and an official Assil Quality validated and marked certification of the technical data, thus comparable with those of other producers. The Assil Quality sheet contains: essential EN 60598-1 safety data and IEC 62722-2-1 technical performance data. 3F Filippi recommends that lighting designers request "Assil Quality" data certification from other manufacturers as well: this will allow these professionals to gain a clearer idea of the products they are comparing. We believe this is a step towards transparency that all companies in the lighting sector should take. Those who make comparisons have nothing to hide: bringing something out into the open also means minimising the shadows. This is why today, thanks to Assil Quality, the truthfulness of the data for 3F Filippi luminaires is more out in the open than ever.

448

Lighting engineering calculation software Don't trust in words. Make your own calculations. On our website, www.3F-Filippi.it, we provide data sheets, product updates and specifications for our products - all of which are freely available and free of charge. The Eulumdat files which you can find online can be used in any lighting engineering program, allowing you to continue using the software you prefer (e.g. DIALux, LITESTAR 4D Litecalc, RELUX, AGi32 or 3D Studio Max). In particular, 3F Filippi has decided to collaborate more closely with the software-houses DIAL and Oxytech to create plug-ins for their lighting engineering calculation programs:

DIAL - DIALux

DIAL - DIALux evo

Oxytech - LITESTAR 4D Litecalc

Datasheets, product updates and specifications on our website: www.3f-filippi.com

449

Infopoint

For particular requirements or to make a comparison, contact our Sales Network.

Lighting engineering Reflection coefficients to use for lighting calculations Reflections in % of painted surfaces and materials (ceiling max 85%; walls max 50%; floor max 30%).

White Light cream Yellow Light grey Pink Light red Medium grey Light blue, green Dark grey, green, red Black

75 ÷ 85 70 ÷ 80 60 ÷ 70 45 ÷ 65 45 ÷ 55 20 ÷ 30 20 ÷ 40 35 ÷ 55 10 ÷ 20 03 ÷ 05

Panels in light-coloured mineral fibre Panels in light-coloured wood Plaster White paper Window panes Light-coloured curtains with narrow mesh Light-coloured curtains with wide mesh Cement, rough concrete Light-coloured marble Granite

75 ÷ 85 50 ÷ 60 70 ÷ 80 70 ÷ 80 06 ÷ 08 65 ÷ 70 35 ÷ 40 20 ÷ 30 40 ÷ 60 15 ÷ 20

Maintenance factors to use for lighting calculations The lighting of a room is the result of the interaction between the lighting devices, the conditions under which they are used, the ageing of the light sources and the environment in which they are installed. The maintenance factor (MF) is the product of these elements: MF = LLMF x LSF x LMF x RSMF LLMF - Lamp Lumen Maintenance Factor (represents the reduction of the luminous flux of the source over time). The luminous flux (lumen) of a source in operation decreases gradually with time. This reduction depends on the type of light source and in some cases, on the type of power supply. This factor is determined on the basis of the reduction in luminous flux before performing maintenance (changing lamp or luminaire). LSF - Lamp Survival Factor (this is the death rate of light sources) After a certain period of time, light sources may cut out. This phenomenon suddenly reduces levels of light in a room. The survival factor is defined in line with the 50% mortality rate of the lamps. In the case of sources that due to their technology, do not die (e.g. LEDs), we must consider this factor as being equal to 1. LMF - Luminaire Maintenance Factor (this represents the reduction of the luminous flux of the luminaire due to dirt) The dirt and dust present in almost all environments accumulate on the lamp, significantly reducing the amount of light it emits. When these substances accumulate on the surfaces of the luminaire, the amount of light reflected or transmitted from these surfaces is reduced. This factor depends on the environment in which the luminaire is located, as well as on the construction features (e.g. Luminaire with or without a diffuser, indirect lighting with greater dust deposits, protection level, possible chimney effect that removes dust from reflective surfaces) and the foreseen cleaning cycle (every 1-2-3- ...years). RSMF - Room Surface Maintenance Factor (this represents the reduction of reflections from room surfaces due to dirt) The dirt on surfaces in a room tends to reduce the amount of light these surfaces reflect. Clean surfaces maintain the level of ambient lighting better. This factor varies according to the type of activity and work carried out in the space in question - for example in an office with weekly cleaning and repainting at regular intervals, this maintenance factor will be higher compared to a factory with monthly cleaning intervals and repainting that is carried out only where actually necessary.

450

Lighting engineering Standards - Indoor lighting EN 12464-1: 2011 Illumination of interior workplaces This European standard for illumination of interior workplaces replaces the previous one from 2004, with an increase in the importance of illumination to allow workers to perform their visual tasks efficiently and accurately. Three calculation areas are defined: • Task-area, determination of the visual task area. If this cannot be determined, the whole surface of the environment is considered. • Immediately surrounding area, at least 50 cm around the task area • Background area, at least 3 m around the immediately surrounding area

For good visual communication and recognition of objects, two requirements gain importance: • Cylindrical illuminance • Modelling Cylindrical illuminance is calculated by the average of the vertical illuminances around the measuring point. The standard requires the following:

Average cylindrical illuminances in interior Seated persons 1.2m

Ez > 50 lx

Standing persons 1.7m

Ez > 50 lx

Good visual communication, e.g. offices, meeting rooms, teaching spaces, etc.

Ez > 50 lx

Uniformity

Uo ≥ 0,10

Modelling represents the equilibrium between diffuse and directional light and is calculated as the relationship between the cylindrical and horizontal illuminance at the measurement point. Good modelling is obtained with a value between 0.3 and 0.6. EN 12464-1: 2011 introduced new limits of average luminance for lighting devices which reflect on computer screens:

Task area Immediately surrounding area Background area Illumination of the immediately surrounding area may be lower than that of the task area but must not be lower than the values given below: Task area ≥ 750 lx 500 lx 300 lx 200 lx 150 lx 100 lx ≤ 50 lx

Immediately surrounding area 500 lx 300 lx 200 lx 150 lx Etask Etask Etask

Luminaire average luminance limits for radial angles >65° Medium High luminance luminance screen Screen luminance screen L > 200 cd.m-2 L ≤ 200 cd.m-2 case A positive polarity and normal requirements regarding colours and ≤ 3000 cd.m-2 ≤ 1500 cd.m-2 details of information viewed, for example offices, schools etc. case B negative polarity with greater requirements regarding colours and ≤ 1000 cd.m-2 ≤ 1500 cd.m-2 details of information viewed, for example for CAD, colour inspections etc.

Lighting values are unchanged: the design must include calculation of a maintenance factor that considers both decrease of luminous flux of lamps and level of dust accumulation in the room.

Glare check for rooms with VDTs Radial

Transverse

Longitudinal 2M 2MG 2US 2S 2SG

longitudinal

90° Luminance 2 <200 cd/m 2 <1000 cd/m for radial angles >65°

>35°

60°

>30°

radial

65°

30° 0°

Datasheets, product updates and specifications on our website: www.3f-filippi.com

451

Infopoint

transverse

Lighting engineering Average lighting levels maintained and recommended by EN 12464-1:2011 Type of interior, task and activity

Em (lx)

Glare UGRL

minimum Ra

500 500 750 500 300 200 300

19 19 16 19 19 25 22

80 80 80 80 80 80 80

300 500 300 500 750 300 200 500 300 500 200 300 100 300 200 500

19 19 19 19 16 19 22 22 19 19 22 19 25 22 22 22

80 80 80 80 80 80 80 80 80 80 80 80 80 80 80 80

500 200 500

19 19 19

80 80 80

200 500 200 300 500 200 100

22 19 25 22 22 22 25

80 80 80 80 80 80 80

100 150 100 500 200 200 min. 0.5 min. 1

28 25 22 19 25 25

40 40 80 80 60 80 80 80

300 (1) 500 500 300

22 (1) 19 19 22

80 80 80 80

OFFICES Writing and data processing CAD stations Technical drawing Conference and meeting rooms Filing and copying Archives Reception SCHOOLS Playrooms in nursery schools Handicraft rooms Classrooms in secondary schools Classrooms in evening and adult education schools, art education Technical drawing rooms Music practice rooms, language labs Common rooms and main hall Preparation rooms and workshops Computer labs Vertical illumination of blackboards Entrances Teachers’ rooms Storage rooms for teaching material Sports facilities, swimming pools (general use) Canteen Kitchen LIBRARIES Reading areas Vertical illumination of shelves Public service areas CANTEENS, RESTAURANTS AND SELF-SERVICE General lighting Conference rooms Wardrobe Buffet, reception, cash desk and porter Kitchen Self-service restaurants Corridors TRANSIT AREAS AND ROOMS FOR GENERAL USE IN BUILDINGS Circulation areas and corridors (floor lighting) Stairs, lifts, escalators Rest rooms Infirmary Technical rooms, control panels Baths, toilets, wardrobe Minimum general emergency lighting (EN 1838) Minimum emergency lighting in exit routes (EN 1838) COMMERCIAL AND/OR EXHIBITION AREAS Sales areas Cash desks Packaging desk Fairs, exhibition halls (general lighting)

Notes: (1) Lighting and UGR depend on the type of shop.

452

Lighting engineering Average lighting levels maintained and recommended by EN 12464-1:2011 Type of interior, task and activity

Glare UGRL

minimum Ra

200 50 200

25 25

80 40 80

300 500 500 1000 750

25 19 22 16 19

80 80 80 90 80

200 300 500 500 500 500 1000

25 25 25 22 22 19 16

80 80 80 80 80 80 90

300 500 750 750 200 300 500 750

22 19 19 19 25 25 22 19

60 60 60 60 80 80 80 80

50 100 200 200 500 20

28 25 25 16

20 40 80 60 80 20

200 300 500 500 750 1000

25 22 22 22 22 16

60 80 80 80 80 90

500 750 1000 1000

22 22 19 19

80 80 90 80

50 150 300 300 750 500 750 1000

28 28 25 25 22 19 22 19

40 40 60 80 80 80 90 90

100 300 20 150 150

25 25

60 60 40 60 60

Em (lx)

INDUSTRIAL AND ARTISANAL ENVIRONMENTS Agriculture - Loading and handling of goods, moving equipment - Livestock buildings - Preparation of fodder, dairies, tool washing, delivery rooms Chemical, plastic, rubber industry - Workplaces with continuous presence of personnel - Rooms for precision measurement, laboratories - Pharmaceutical production, tyres - Colour inspection - Cutting, finishing, inspection Food industries - Beer breweries, jam/chocolate/sugar production plants - Product selection and washing, packaging - Work zones in slaughterhouses, dairies, mills - Inspection of glass and bottles, product check - Food production, kitchen work, cigarette manufacture - Laboratories - Colour inspection Metal working and transformation - Rough and medium machining - Fine machining - Marking off, inspection - Manufacture of tools and cutting equipment - Rough assembly - Medium assembly - Fine assembly - Precision assembly Power plants - Fuel supply facilities - Boiler rooms - Machine shop - Pump rooms, condenser rooms, switching systems - Control stations - Outside control devices Textile production and processing - Workplace in vicinity of baths - Washing, ironing, spinning - Spinning, twining, spooling - Finishing, dying, weaving - Sewing, fine-gauge knitting, mending - Colour inspection, quality control Automotive - Body and assembly - Painting, polishing booth - Painting: retouching, inspection - Upholstery, final inspection Woodworking and wood processing - Automatic processing - Steaming beds - Saw frame - Bench work, assembly - Smoothing, painting - Machine work - Wood selection, inlay - Quality control, inspection Storage areas Handling, packing, shipping areas Warehouses with racking – corridor without personnel (lighting at floor) Warehouses with racking – corridor with personnel (lighting at floor) Control stations

Datasheets, product updates and specifications on our website: www.3f-filippi.com

22 22

453

Infopoint

WAREHOUSES AND COLD STORAGE ROOMS

Lighting engineering Average lighting levels maintained and recommended by EN 12464-1:2011 Type of interior, task and activity

Em (lx)

Glare UGRL

minimum Ra

100 300 200 50 200 500 1000 500 1000 500 300 1000 500 500 300

19 19 22 22 22 19 19 19 19 19 19 19 19 19 22

80 80 80 80 80 90 90 90 90 80 80 90 80 90 80

25 25 25 19

20 20 20 80

HEALTHCARE STRUCTURES Recovery rooms (general lighting, at floor) Recovery rooms (lighting for reading and simple examination) Corridors (day) Corridors (night) Public rooms Diagnosis rooms (general lighting) Diagnosis rooms (examination and treatment) Pre-operating rooms Operating rooms Laboratory, pharmacy (general lighting) Massage, radiotherapy, endoscopy, simple examinations Examinations and intensive care Treatment, dialysis, plaster rooms Dentists (general lighting) Sterilisation and disinfection rooms INDOOR SPORTS FACILITIES (2) - Standard EN 12193 Physical exercise rooms Track and field Lawn bowling Swimming pool Wrestling, weight-lifting, judo Basketball, volleyball Boxing Tennis Table tennis Target-shooting (spring-board - target) Archery

300 200-300-500 200-300-500 200-300-500 300-500 300-500-750 300-500 200-300-750 300-500-700 300-500 150-300-400

INDOOR PARKING Lanes and parking areas (floor lighting) Entrance/exit ramps (day) (lighting at floor) Entrance/exit ramps (night) (lighting at floor) Ticket office OUTDOOR AREAS (CIE 129) Parking areas for shops, schools, condominiums Very rough work, loading and unloading Rough work, transport and storage Pedestrian walkways

KEY Em

75 300 75 300 5 20 50 5

Average lighting level, generally referring to a height of 0.85 m from the floor for work zones and at floor level for transit zones.

UGRL

Unified glare rating in room based on characteristics of observation and lay-out of luminaires, developed by IEC and required by European standard EN 12464-1 (see next page).

Minimum colour rendering index of lamps (see p.409, 410 and 411).

Notes:

(2) Indoor sports facilities provide for 3 levels of lighting based on their use, specifically: Non-competitive sports, Competitive sports at local level, Competitive sports at national and international level.

454

Lighting engineering U.G.R. - Unified Glare Rating UGR is a unified international index developed by CIE (Commission Internationale de l'Eclairage) in publication 117 of 1995, to evaluate direct glare in every specific application based on the position of luminaires, room characteristics (dimensions, reflections), and on the observation point of workers.

Calculations • Transverse UGR:

UGR reference values on CIE tables range between 10 and 30 in steps of 3 units (10, 13, 16, 19, 22, 25 and 28) and apply to both directions of view (transverse and longitudinal) to the luminaire: the lower the value, the less direct glare.

UGR Table - luminaire 4x18 2MG

European standard EN 12464-1 for the lighting of indoor workplaces requires a UGR value for every application. Respecting the UGR value in workplaces with VDTs is a necessary but not sufficient condition because the average luminance requirement for luminaires (1000-3000 cd/m2) is still in effect (see the tables on the previous pages for specific values). UGR tables are supplied for each luminaire, but are valid only for normal workplaces. Example of calculation office with 4x18 2MG luminaire EN 12464-1 requires a UGR value of ≤19 for this application. Data for room and installation: • Room height: 3.2 m • Height from worker’s eye to luminaire H: 3.2-1.2= 2 m • Transverse distance 8.0 m ÷ 2 m = 4H • Longitudinal distance 16.0 m ÷ 2 m = 8H • Reflection index: Ceiling 70%; Walls 50%; Floor 20%.

• Longitudinal UGR:

15.2 Value in direction of observation transverse to luminaires. 15.6 Value in direction of observation longitudinal to luminaires.

Ceiling 70 70 50 50 30 70 70 50 50 30 Walls 50 30 50 30 30 50 30 50 30 30 Floor 20 20 20 20 20 20 20 20 20 20 Environment Transverse view Longitudinal view X Y of luminaire of luminaire 2H 2H 15.6 16.6 15.8 16.8 17.1 16.1 17.2 16.4 17.4 17.6 3H 15.4 16.4 15.7 16.6 16.9 16.0 16.9 16.3 17.2 17.4 4H 15.3 16.2 15.7 16.5 16.8 15.9 16.8 16.2 17.0 17.3 6H 15.3 16.1 15.6 16.4 16.7 15.8 16.6 16.1 16.9 17.2 8H 15.2 16.0 15.6 16.3 16.6 15.8 16.6 16.1 16.8 17.2 12H 15.2 16.0 15.6 16.3 16.6 15.7 16.5 16.1 16.8 17.1 4H

2H 15.5 16.4 15.8 16.7 16.9 15.9 16.8 16.3 17.1 17.4 3H 15.4 16.1 15.7 16.4 16.7 15.8 16.5 16.2 16.9 17.2 4H 15.3 15.9 15.7 16.3 16.6 15.7 16.4 16.1 16.7 17.1 6H 15.2 15.8 15.6 16.1 16.5 15.6 16.2 16.0 16.6 17.0 8H 15.2 15.7 15.6 16.1 16.5 15.6 16.1 16.0 16.5 16.9 12H 15.1 15.6 15.6 16.0 16.4 15.6 16.0 16.0 16.4 16.9

4H 15.2 15.7 15.6 16.1 16.5 15.6 16.1 16.0 16.5 16.9 6H 15.1 15.5 15.5 15.9 16.4 15.5 16.0 16.0 16.4 16.8 8H 15.0 15.4 15.5 15.9 16.3 15.5 15.9 15.9 16.3 16.8 12H 15.0 15.3 15.5 15.8 16.3 15.4 15.8 15.9 16.2 16.7

12H 4H 15.1 15.6 15.6 16.0 16.4 15.6 16.0 16.0 16.4 16.9 6H 15.0 15.4 15.5 15.9 16.3 15.5 15.9 15.9 16.3 16.8 8H 15.0 15.3 15.5 15.8 16.3 15.4 15.8 15.9 16.2 16.7

Glare

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Work surface and keyboard.

455

Infopoint

Direct and reflected on VDT.

Lighting engineering Description of louvres All of our louvres are composed of parabolic longitudinal and transverse elements. The transverse elements (blades) are completely closed at the top to provide: • Higher efficiency (+10%) • Parabolic uniformity without deformation • A much stronger and sturdier louvre

The aluminium louvres are very thick, which makes them extremely strong and non-deforming even after many maintenance procedures. No tools are needed to open the louvre, which remains suspended with steel springs. Earthing is maintained by the springs or an earthing wired during maintenance.

Types of louvres Low luminance

Decorative/Business

With special diffuser, in rooms with VDTs and CAD, generic sales and business offices, school rooms. Luminance <200-1000 cd/m2 for radial angles >65°. 2M Specular aluminium 2MG Specular aluminium, high efficiency 2US Semi-polished aluminium 2S Semi-specular aluminium

Highly aesthetic, in public spaces, sales and business offices, showrooms. 3AO Matt silver aluminium COM Specular aluminium, high efficiency for longitudinal elements; white aluminium for transverse blades

Louvres

Material Surface Total reflection Efficiency Luminance <200 -1000 cd/m2 for radial angles Matching of louvre to colour of furnishing Contrasts of luminous flux on louvre\tab present Iridescent effect Delicacy of louvre to touch Deposits of dust Louvres Material Surface Total reflection Efficiency Luminance <200 -1000 cd/m2 for radial angles Matching of louvre to colour of furnishing Contrasts of luminous flux on louvre\tab present Iridescent effect Delicacy of louvre to touch Deposits of dust

456

2MG

aluminium specular 87% R>65%

aluminium specular 95% R>70%

>65°

visible

present

light notable visible

absent notable visible

2US

aluminium semi-glossy 85% R>62%

aluminium semi-specular 87% R>65%

>65°

invisible

limited

absent

absent limited invisible

Material Surface Total reflection Efficiency Visual effect Delicacy of louvre to touch Deposits of dust

3AO aluminium satin 78% R>60% soft limited invisible

Lighting engineering Fluorescent lamps and caps Power [W]

Length [mm]

Cap

Flux (25°C) [lm]

Colour temperature [K]

Colour rendering Ra group

System efficiency [lm/W]

Luminance [cd/cm2]

Ra index

1B 1B 1B 1B 1B 1B 1B 1B 1B 1B 1B 1B 1B

80-90 80-90 80-90 80-90 80-90 80-90 89-90 80-90 80-90 80-90 80-90 80-90 80-90

75 69 66 79 73 71 87 80 80 78 87 80 79

1.7 1.6

1B 1B 1B 1B 1A 1A 1B 1B 1B 1B 1B 1A 1A 1B 1B 1B 1A 1A 1B 1B 1B

80-90 80-90 80-90 80-90 >90 >90 80-90 80-90 80-90 80-90 80-90 >90 >90 80-90 80-90 80-90 >90 >90 80-90 80-90 80-90

65 61 59 57 48 52 72 66 73 67 66 57 62 80 76 75 63 69 71 66 64

2.5 2.4 2.4

Average life hours HF

Linear fluorescent electronic T5 lamps Ø16mm, high-efficiency 14

549

849

1149

1449

1200 1100 1080 1900 1750 1700 2600 2500 2400 2350 3300 3050 3000

27-30-35-4000 6500 8000 27-30-35-4000 6500 8000 27-30-35-4000 5000 6500 8000 27-30-35-4000 6500 8000

1.7 1.6 1.7 1.6 1.6 1.7 1.6

24,000 24,000 24,000 24,000 24,000 24,000 24,000 24,000 24,000 24,000 24,000 24,000 24,000

Linear fluorescent electronic T5 lamps Ø16mm, high-output 24

549

49 80

849

1149

1449

1750 1650 1600 1550 1300 1400 3100 2850 4450 4100 4000 3800 3800 4300 4100 4050 3500 3450 6150 5700 5550

27-30-35-4000 5000 6500 8000 4000 50-6500 27-30-35-4000 6500 27-30-35-4000 6500 8000 4000 6500 27-30-35-4000 6500 8000 4000 50-6500 27-30-35-4000 6500 8000

1.7 1.8 2.8 2.7 2.9 2.8 2.0 2.2 2.0 1.9 1.6 1.7 2.9 2.7

24,000 24,000 24,000 24,000 24,000 24,000 24,000 24,000 24,000 24,000 24,000 24,000 24,000 24,000 24,000 24,000 24,000 24,000 24,000 24,000 24,000

Linear fluorescent electronic T5 lamps Ø16mm, high-output, long lasting 54 49 80

1149 1449 1449

G5 G5 G5

4450 4300 6150

30-4000 30-4000 30-4000

1B 1B 1B

80-90 80-90 80-90

73 80 71

2.9 2.0 2.9

45-70,000 45-70,000 45-70,000

1B 1B 1B 1B 1B 1B 1B

80-90 80-90 80-90 80-90 80-90 80-90 80-90

72 68 73 68 70 63 77

2.0 1.9 2.6 2.4 3.6 3.2 3.8

12,000 12,000 12,000 12,000 12,000 12,000 12,000

Ø225

2GX13

Ø300

2GX13

Ø300

2GX13

Ø380

2GX13

1800 1710 3300 3000 4200 3800 5000

27-30-4000 6500 27-30-4000 6500 27-30-4000 6500 30-4000

Datasheets, product updates and specifications on our website: www.3f-filippi.com

457

Infopoint

Round fluorescent electronic T5 lamps Ø16mm 22 40 55 60

Lighting engineering Fluorescent lamps and caps Power [W]

Length [mm]

Cap

Flux (25°C) [lm]

Colour temperature [K]

Colour rendering

System efficiency [lm/W]

Ra group

Ra index

Starter

1B 1B 1B 1A 1A 1A 2B 2A 1B 1B 1B 1A 1A 1A 2B 2A 1B 1B 1B 1A 1A 1A 2B 2A

80-90 80-90 80-90 >90 >90 >90 60-70 70-80 80-90 80-90 80-90 >90 >90 >90 60-70 70-80 80-90 80-90 80-90 >90 >90 >90 60-70 70-80

52 50 50 42 46 44 46 40 78 76 67 63 67 66 66 58 78 75 73 65 69 68 69 60

68 66 66 56 61 58

1,0 0,95

89 87 77 72 77 76

1,25 1,2

91 87 86 76 80 79

1,5 1,5

68 63 68 63 87 84 89 85 90 87 91 87

1,0 0,95 1,0 0,95 1,25 1,2 1,25 1,2 1,5 1,45 1,5 1,5

47.000 47.000 55.000 55.000 47.000 47.000 55.000 55.000 47.000 47.000 55.000 55.000

0,70 0,60 0,50 0,75 0,68 0,60 0,80 0,70 0,65

10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000

Luminance [cd/cm2]

Average life hours Starter

10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000 10.000

20.000 20.000 20.000 20.000 20.000 20.000

Linear fluorescent T8 lamps Ø26mm 18

590

G13

1200

G13

1500

G13

1350 1300 1300 1100 1200 1150 1200 1050 3350 3250 2900 2700 2900 2850 2850 2500 5200 5000 4900 4350 4600 4550 4600 4000

27-30-35-4000 6500 8000 3000 4000 54-6500 4000 6500 27-30-35-4000 6500 8000 3000 4000 54-6000 4000 6500 2700-30-35-4000 6500 8000 3000 4000 54-6000 4000 6500

0,9 0,9

20.000 20.000 20.000 20.000 20.000 20.000

Linear fluorescent T8 lamps Ø26mm, long lasting Linear fluorescent T8 lamps Ø26mm 18

590

G13

1200

G13

1500

G13

1350 1250 1350 1250 3250 3150 3350 3200 5150 5000 5200 5000

30-4000 6500 30-4000 6500 30-4000 6500 30-4000 6500 30-4000 6500 30-4000 6500

1B 1B 1B 1B 1B 1B 1B 1B 1B 1B 1B 1B

80-90 80-90 80-90 80-90 80-90 80-90 80-90 80-90 80-90 80-90 80-90 80-90

52 48 52 48 76 73 78 74 77 75 78 75

27-4000 4000 6500 27-4000 4000 6500 27-4000 4000 6500

1B 2B 2A 1B 2B 2A 1B 2B 2A

80-90 60-70 70-80 80-90 60-70 70-80 80-90 69-70 70-80

45 39 34 55 50 42 61 53 48

Round fluorescent T8 lamps Ø26mm

Ø216

G10q

Ø305

G10q

Ø406

G10q

1250 1100 1000 2100 1900 1600 2800 2450 2200

Fluorescent lamps commonly used for indoor lighting. See EN 12464-1 for selection of colour rendering index of lamp based on visual task. The above values are taken from the catalogues published by lamp manufacturers and are subject to change; for specific lamp values, please see the relevant manufacturer catalogues.

458

The average life of lamps is assessed on the basis of lamps with electronic wiring with warm-start ballasts. Colour temperature groups: below 3300K Warm light 3300K to 5300K Neutral light above 5300K Cold light

Lighting engineering Fluorescent lamps and caps Power [W]

Length [mm]

Cap

Colour rendering

System efficiency [lm/W]

Ra group

Ra index

Starter

27-30-4000 6500 27-30-4000 27-30-4000 30-40-5400 27-30-4000 30-40-5400 27-30-4000 8000 30-40-5400 27-30-4000 6500 8000 5400 27-30-35-4000 6500 8000 30-40-5400 27-30-35-4000 8000 27-30-40-6500 27-30-4000 27-30-35-40-6500 27-30-4000 27-30-35-40-6500 27-30-35-40-6500

1B 1B 1B 1B 1A 1B 1A 1B 1B 1A 1B 1B 1B 1A 1B 1B 1B 1A 1B 1B 1B 1B 1B 1B 1B 1B

80-90 80-90 80-90 80-90 90-100 80-90 90-100 80-90 80-90 90-100 80-90 80-90 80-90 90-100 80-90 80-90 80-90 90-100 80-90 80-90 80-90 80-90 80-90 80-90 80-90 80-90

30-4000 30-4000

1B 1B

4000 4000 4000 27-30-4000 27-30-4000 27-30-4000 27-30-4000 27-30-4000 27-30-4000

1B 1B 1B 1B 1B 1B 1B 1B 1B

Flux (25°C) [lm]

Colour temperature [K]

900 850 900 1200 950 1800 1500 2900 2600 2350 3500 3325 3150 2950 4800 4800 4320 4000 6000 5850 900 900 1200 1200 1800 1800

Luminance [cd/cm2]

Average life hours Starter

8.000 8.000

20.000 20.000 10-13.000 10-13.000 10-13.000 10-13.000 10-13.000 10-13.000 10-13.000 10-13.000 10-20.000 10-20.000 10-20.000 10-20.000 10-20.000 10-20.000 10-20.000 10-20.000 10-20.000 10-20.000

Fluorescent compact lamps C

11C

214

G23

18C

217

2G7 2G11

24C

317

2G11

36C

411

2G11

40C

533

2G11

55C

533

2G11

80C

568

2G11

13CD

115

G24d-1 G24q-1 G24d-2 G24q-2 G24d-3 G24q-3

18CD

130

26CD

149

60 57 60 50 31 56 38 67 60 44

58 36 66 44 80 71 52 80 76 68 50 80 75 68 50 69 65

2,7 2,7 2,7 2,1 2,1 2,1 2,1 2,8 2,8 2,3

8.000 8.000 8.000 8.000 8.000 8.000 8.000

3,2

3,2 3,7

4,0 4,0 4,5 4,5 6,0 6,0

80-90 80-90

80 80

2,8 3,2

36.000 36.000

80-90 80-90 80-90 80-90 80-90 80-90 80-90 80-90 80-90

80 80 69

2,3 3,2 3,7 4,5 4,5 6,0 6,0 6,5 7,0

12.000 12.000 12.000

69 50 60 56

8.000 10-13.000 8.000 10-13.000 8.000 10-13.000

Fluorescent compact lamps, long lasting 36C 55C

411 533

2G11 2G11

2900 4800

Fluorescent compact amalgam lamps

40C 55C 80C 18CT

533 533 568 100

26CT

115

32CT 42CT

131 152

2G11 2G11 2G11 GX24d-2 GX24q-2 GX24d-3 GX24q-3 GX24q-3 GX24q-4

3500 4800 6000 1200 1200 1800 1800 2400 3200

50 60 56 67 69 70

8.000 10-13.000 8.000 10-13.000 10-13.000 10-13.000

Fluorescent compact amalgam lamps, long lasting

Datasheets, product updates and specifications on our website: www.3f-filippi.com

33.000 33.000 33.000

459

Infopoint

32CT 131 GX24q-3 2400 30-4000 1B 80-90 69 6,5 42CT 152 GX24q-4 3200 30-4000 1B 80-90 70 7,0 57CT 181 GX24q-5 4300 30-4000 1B 80-90 69 7,0 G••d-• cablaggi magnetici con starter integrato nella lampada. G••q-• cablaggi elettronici, elettronici in emergenza, magnetici in emergenza, magnetici con starter non integrato nella lampada.

Electrical engineering and Electronics Laboratory testing 3F Filippi has an internal IMQ (Italian Quality Mark)-certified test laboratory to guarantee its Customers solid products certified to the toughest standards; this lab is able to perform the following tests:

Temperature test Serves to measure the temperatures reached by the electrical or electronic components or the thermal limits of the materials used for the luminaires.

Resistance to salt spray test This is an accelerated corrosion test to provide a qualitative assessment of the corrosion resistance of a material or the corrosion protection provided by a coating.

Liquid-proof test Serves to determine the level of protection of a product against the entry of liquids into the product body. The results obtained determine the IP rating of a product.

Dust-proof test Serves to determine the level of protection of a product against the entry of solid bodies. The results obtained determine the IP rating of a product.

To carry out these tests, 3F Filippi uses IMQ-approved equipment and facilities that have been granted the IMQ-078/CTF2-A certificate (this can be downloaded from our website at www.3F-Filippi.it). All this allows us to perform product certification tests autonomously, speeding up product development significantly, all to the customer's advantage and guaranteeing the safety, quality and duration of products. Moreover, all our products are manufactured in compliance with the current national IEC 34-21, European EN 60598-1 and international IEC 60598-1 standards.

460

Electrical engineering and Electronics Lighting engineering requirements of luminaires are satisfied by quality electronics Unfortunately, cheap electronic ballasts are available on the market. Quality HF: longer lamp life But these consume more energy, give shorter lamp life, shorter ballast life, irregular output power, etc. Their main differences compared to quality electronics are described below: 24

Lamp average life (x1000)

Quality HF: lower power consumption Quality HF: energy efficiency index EEI= A2 BAT Cheap HF: energy efficiency index EEI= A3

HF cold start 12

HF warm start

IEC cycle

0 0,15/0,05

0,45/0,15

2,45/0,15

11,30/0,30

On/off cycles (hours) Quality HF: constant (=lamp flow) output power Absorbed power Psys [%]

Quality HF: longer ballast life

HF in operation [%]

quality HF

100% 90% 80% 60% 40% low cost HF

20% 0 0

15,000 25,000

50,000

75,000

115

low cost HF

100 quality HF

80 0

Statistic life [HRS]

210V

230V

250V

Mains voltage

3F Filippi uses only top quality leading-brand electronic ballasts 3F Filippi is a leader in the research and manufacture of luminaires specially designed for electronic fluorescent lamps and wiring. Oversized housings and gear trays, the choice of materials such as aluminium and steel for better heat dissipation, and careful positioning of components allow electronic ballasts to work at temperatures well below allowed limits and electronic fluorescent lamps to work under optimum emission conditions. Example of correct design of a luminaire with electronic fluorescent lamps and ballast unit to safeguard efficiency and life. Large wiring compartment temperature

3F Cub

Electronic ballasts

Aluminium body for improved heat dissipation

Large lamp compartment for maximum light emission

Datasheets, product updates and specifications on our website: www.3f-filippi.com

Electronic ballast Separate wiring compartment to limit temperature

461

Infopoint

3F Dodeca

Electrical engineering and electronics Fluorescent electronic wiring Wirings are created with finest quality, high frequency, lamp warm start electronic ballasts with energy efficiency index EEI = A2 and/ or EEI = A2 BAT (Best Available Technology). Electronic ballast integrates the functions of current limiter, starter, and power factor corrector. Operation of the fluorescent lamp, powered at high frequency, provides the following advantages for the end user: • 20-30% energy saving. • 50% longer lamp life. • High quality light without flickering and strobe effects. • Power factor >0.95 (check values on product cards). • Constant output power. • Automatic switch-off of consumed lamps. • Lower maintenance. • Lower temperature in luminaires during operation. • No hum. Technical specifications: • Power supply requirement 230V/50-60Hz with tolerance+/- 10% of line voltage. • Operating frequency >25 KHz in all power ranges. • Possibility of DC operation. • Leakage current to earth less than 0.5 mA, facilitating coordination of differential switches. • Suitable for rooms with temperatures from -15°C to +30°C. • For use at low temperatures (0°C to -30°C), it is recommended Surge Protection Devices are used on the power supply line and any causes of undervoltages are eliminated. For use in tough conditions, for instance with the presence of corrosive chemicals, extreme temperatures, high humidity (e.g. composting systems, cold stores, mushroom beds, greenhouses, saunas etc.), contact our Technical department. Type of electronic ballast: • Electronic ballasts with cold start of lamp. The lamp switches on immediately when ballast power is applied (< 0.5 sec). These ballasts are suitable for applications with a maximum of 3 daily switch-ons. • Electronic ballasts with warm start of lamp. • The lamp switches on after 1-2 seconds (pre-heat time), and therefore start-up and best operation of the lamp are guaranteed even in applications with many daily switch-ons. Important: considering the same number of on/off cycles, the warm start ballast always ensures longer lamp life than the cold start ballast. (See chart below for T5 and T8 linear fluorescent lamps). All 3F Filippi luminaires are fitted with warm-start electronic ballasts and provide constant output power.

Note: fluorescent lamps with electronic ballasts also have emissions in the infra-red range which can interfere with IR-based systems; to prevent interference or malfunction, such systems must operate with a higher carrier frequency.

Luminaires T8

1x18 1x36 1x58 2x18 2x36 2x58 3x18 3x18* 4x18 4x18* 4x36 4x58 1x14 T5 1x24 T5 1x28 T5 1x35 T5 1x39 T5 1x49 T5 1x54 T5 1x80 T5 2x14 T5 2x24 T5 2x28 T5 2x35 T5 2x49 T5 2x54 T5 2x80 T5 3x14 T5 3x14* T5 3x24 T5 4x14 T5 4x14* T5 4x24 T5 4x35 T5 4x54 T5 4x49 T5 4x80 T5 6x49 T5 6x54 T5

Maximum power (W) lamp +ballast system 19 36 55 35 71 109 53 55 70 74 142 218 16 25 31 38 41 53 58 86 31 49 60 76 106 114 170 48 48 75 62 62 98 152 228 212 340 318 342

Luminaires

Maximum power (W) lamp + ballast system

Round T5

1x22 T5-R 1x40 T5-R 1x55 T5-R 1x60 T5-R

25 42 60 65

Compact 2x24C 4x24C 1x40C 1x55C 2x36C 2x40C 2x55C 3x40C 3x55C 4x40C 4x55C 6x55C 2x80C 1x18CD-CT 1x26CD-CT 1x32CT 1x42CT 2x18CD-CT 2x26CD-CT 2x32CT 2x42CT

48 96 45 60 70 89 118 134 178 178 236 354 173 19 26 34 44 37 53 69 91

MultiWatt electronic wiring

Lamp average life (x1000)

HF acc. immediata

HF acc. a caldo

ciclo IEC

0 0,15/0,05

0,45/0,15

2,45/0,15

On/off cycles (hours)

462

11,30/0,30

MultiWatt electronic ballasts for T5 linear lamps and compact lamps allow different power lamps to be used in the same luminaire. This offers maximum flexibility when changing activities and/or visual tasks in the rooms: the new lighting required is obtained simply by changing the lamp. It is possible to personalise workplace lighting and optimise light levels based on the visual needs of each worker. The luminaires supplied with these ballasts as standard are: Barraluce L, Barraluce P, Fly2, 3F Travetta DI, 3F Travetta, Mira Parete DE, P200 Multi T5, L 580 T5 MultiWatt, L590 T5 MultiWatt, 3F Linda MultiWatt. Watt

Electrical engineering and electronics Adjustable fluorescent electronic wiring

Cost comparison of the various types of fluorescent wiring

Dimmable electronic ballasts permit to design “dynamic light systems” in which the light level can be adapted to the visual task and/or to variation of natural light entering from the outside. In addition to the advantages of electronic wiring, dimmable electronic ballasts (EEI = A1 BAT) with lamp warm start allow the light level to be adjusted over an extremely wide range (1% to 100%), optimising the lighting system for energy saving and visual comfort.

Commercial Environment For this type of environment, a 2x58W luminaire running for 4000 hours per year has been considered.

The lamps are dimmed by a control signal carried by wires directly to the ballast from devices such as potentiometers, buttons, light and/or presence sensors, used individually or managed by control units.

Electronic wiring also allows you to increase energy savings and decrease management costs, thanks to higher lamp life.

The table below shows the yearly energy consumption per single luminaire. To obtain the consumption of the whole system, just multiply by the total number of luminaires installed.

Characteristics

Dimmable electronic wiring is done with: • electronic ballasts with 1-10V interface, with dimming by means of an analogue signal ranging from 10V DC (maximum light) to 1V (minimum light) • electronic ballasts with DALI interface, with digital dimming according to the new standard Digital Addressable Lighting Interface protocol.

Wiring with low loss

Wiring ballast

Dimmable Wiring ballast

0.18

4000

€ 101.52

€78.48 (- 23%)

€39.60 (- 61%)

Luminaire power 2x58W Cost Kwh (Euro) Annual hours of operation Total energy cost for single luminaire

On request, all dimmable wiring systems can be done with electronic ballasts with DALI interface. With appropriate interfaces, dimmable electronic wiring also allows creation of appropriate lighting systems for creating lighting systems suitable for applications in systems managed by intelligent (bus) systems. For further information please contact our Technical Offices. Important: run new lamps for at least 100 hours at maximum luminosity (100%) to prevent malfunctions at start and to avoid a reduction in the lamp lifetime. Dimmable electronic wiring is the best solution for energy-efficient and high light-efficient systems, letting users adapt lighting to their precise needs, i.e., the right light without waste. Suitable for rooms with temperature from +5°C (+10°C/15°C for C, CD, CT compact or T5 linear fluorescent lamps) to +30°C.

*We considered an average daily dimming equal to 50% of power supply. Consumption (W) lamp + ballast 140 120 100 80 60

141 109

40 55

20 0 Lowloss EEI B2

Energy consumption by luminous flux.

Electronic EEI A2 BAT

Electronic dimmable EEI A1 BAT

Comparison of energy costs (%)

100

% Power supply

100 40

0 1

100

% Luminous level Datasheets, product updates and specifications on our website: www.3f-filippi.com

Lowloss C

Electronic EEI A2 BAT

Electronic dimmable EEI A1 BAT

463

Infopoint

Electrical engineering and electronics Fluorescent low loss starter wiring

Very low loss fluorescent wiring

The luminaires are wired with low loss magnetic ballasts, already complying with European Directive 245/2009/EC which repealed the Directive 2000/55/EC concerning energy efficiency of ballasts for fluorescent lamps, with an energy efficiency index EEI = B2, starter switch-on, power supply voltage of 230V-50Hz. Rigid cables cross section. 0.50-0.75-1 mm² (0.75-1 mm² also class II), heat resistant PVC HT 90°C, CEI 20-20. Power factor correction in parallel, cos >0.9 with metallised polypropylene film capacitor, self-regenerating, not containing PCB liquid pollutants, incorporated discharge resistance, safety device, IEC 34-36. LTN connecting terminal block with maximum connecting capacity of 2x2.5 mm² per pole. Cut-out fuse incorporated in terminal block permits any short circuit to be limited to the luminaire affected. No immediate maintenance is necessary because all of the luminaires connected on the same line continue to operate, making it simple locate the failure. All luminaires comply with IEC 60598-1, CEI EN 60598-1 (CEI 34-21) safety standards and EN 55015 electromagnetic compatibility regulations; almost all series are IMQ approved. Suitable for use in rooms with temperatures from -5°C to +25°C (maximum temporary temperature +35°C). For rooms with low temperatures, use of a DEOS safety starter (available on request) is recommended. Temperatures from +25°C to -15°C.

Same characteristics as low loss starter wiring, but with 230V-50Hz very low loss magnetic ballasts with an energy efficiency index EEI = B1.

Luminaires

Compact

Round T8

1x18 1x36 1x58 2x18 2x36 2x58 3x18 3x36 3x58 4x18 4x36 4x58 1x11 C 1x18 C 1x24 C 1x36 C 2x11 C 2x18 C 2x24 C 2x36 C 3x24 C 1x22 1x32 2x32+40

Maximum power (W) lamp + ballast system 26 43 67 43 87 134 69 129 201 86 174 268 15 26 32 43 30 52 64 86 96 28 38 88

Advantages in using very low loss ballasts: • Reduced internal losses, or a reduction of power losses dissipated by the system of over 30% compared to standard magnetic ballasts. • Economical management due to energy savings, particularly evident in the case of prolonged use. • Greater thermal equilibrium inside the luminaires due to lower temperatures developed by the ballasts, with consequent longer life for all of the wiring components and less need for maintenance works. Suitable for use in rooms with temperatures from –5°C to +35°C (maximum temporary temperature +45°C).

Luminaires T8

Compact

1x18 1x36 1x58 2x18 2x36 2x58 3x18 3x36 4x18 4x36 4x58 2x24 C 1x13 CD 1x18 CD 1x26 CD 2x13 CD 2x18 CD 2x26 CD

Maximum power (W) lamp + ballast system 24 41 64 42.5 82 128 67 123 85 164 256 61 21 24 32 42 48 64

Ballast classification based on energy efficiency (EEI) The European Federation of National Manufacturers Associations for Luminaires and Electro-technical Components (CELMA), in collaboration with the association of lamp manufacturers, has developed a new classification system providing, for each lamp type, 7 classes of power absorbed by the lamp+ballast system. These classes are assigned an energy efficiency index (EEI) starting from the most efficient: A1 BAT*, A1, A2 BAT*, A2, A3, B1, B2. Even if there are no direct correlations with a specific technology, A1 BAT* and A1 refer to dimmable electronic ballasts, A2 BAT*, 464

A2 and A3 to electronic ballasts, B1 to very low loss magnetic ballasts, and B2 to low loss magnetic ballasts. Note on magnetic ballasts: on the basis of 2000/55/EC, luminaires with EEI= D ballasts were banned in 2002 and luminaires with EEI= C ballasts were banned in November 2005. * BAT = Best Available Technology (on the market).

Electrical engineering and electronics Emergency fluorescent wiring Wiring created with emergency lighting systems with the following characteristics: • Rigid cables, cross section 0.50-0.75-1 mm² (0.75-1 mm² also Class II), heat resistant PVC HT 90°C, CEI 20-20. • Protective fuse, same characteristics as starter wiring. • 230V-50/60Hz electronic inverter with protection against excessive battery discharge. • Sealed Nickel-Cadmium or Nickel-Metal Hydride NiMH. • LED to signal presence of power supply and battery charging. • Recharge time 24 hrs. • Running time = 1h minimum under heaviest working conditions. • 3-pole terminal block with incorporated disconnecting fuse for standard power supply live-earthing-neutral (LTN). • 2-pole terminal block for power supply of the • emergency-recharge. • Complies with IIEC 60598-1, CEI EN 60598-1 (CEI 34-21) and CEI EN 60598-2-22 (CEI 34-22). • Suitable for rooms with temperature from 0°C to +25°C.

Luminous flux in an emergency The following table shows percentages of luminous flux of lamps in emergency operation. These fluxes are the minimum guaranteed during rated autonomy as required by IEC EN 60598-2-22, and should therefore be used in the design stage.

Lamp power (W) T8

On request: • Inhibition and/or rest mode. • Emergency system with 3hrs duration, with 1/1.5/2hr duration 12hrs recharge (according to feasibility), wirings with intelligent control systems and centralised or local management of emergency lighting. • Emergency lighting systems with high luminous flux. • Inhibition remote control: the inhibition remote allows the lamps to be turned off and also turned back on when running in emergency mode. When power returns, ‘readyfor-emergency’ condition is restored automatically. (as per CEI EN 60598-2-22) Compact EP permanent emergency lighting When power is on, EP luminaires operate like normal luminaires; in the event of power failure, the lamp connected to the emergency lighting system switches on or stays on automatically. In EP luminaires with 2, 3 or 4 lamps, only one lamp switches on in emergency mode. ENP non-permanent emergency lighting In ENP luminaires, the lamp switches on only in emergency mode, due to power failure.

Round T5 Round T8

18 36 58 58 * 14 14 * 24 24 * 28 28 * 35 35 * 49 49 * 54 54 * 80 80 * 11 C 24 C 40 C 40 C * 55 C 55 C * 18 CD 26 CD 32 CT 42 CT 22 T5-R 40 T5-R 60 T5-R 22 TR 32 TR

Flux percentage in an emergency (%) for 1 hour 22 15,5 13,9 15 15 46 9 33,4 10,6 39 12,7 28,6 11,4 23 8,5 18,2 6,8 14,4 15 11 8 22,5 9 15 10 9 8 7 8 9 8 11 8

Inhibition remote control * High-flux emergency (evaluated on a per-request basis). See the specific section for fluxes in emergency mode for LED luminaires.

Datasheets, product updates and specifications on our website: www.3f-filippi.com

465

Infopoint

Notes • If both the ordinary power supply and emergency recharge supply derive from a 3-phase system, the phase of the two power supplies (especially with emergency wiring with electronic ballasts) should be the same. • In case of inhibition via switch (permanent shut-down), this circuit should be considered the security circuit.

Electrical engineering and electronics Marks and standards

The single European mark ENEC (European Norms Electrical Certification) certifies that a luminaire conforms to EN European standards. IMQ is one of the European certifying bodies belonging to ENEC. Luminaires approved by IMQ on the basis of European standards are therefore ENECcertified.

All 3F Filippi luminaires bear the CE marking. This marking attests to be fact that the luminaires conform to the requirements set out in Community Directives for electrical materials and that they may be freely marketed throughout the European Union. Directives applicable to lighting products are: • the 2006/95/EC low-voltage directive • the 2004/108/EC electromagnetic compatibility directive • the Ecodesign directive 2009/125/EC • the RoHS 2011/65/EU directive

The acronym EN refers to the European standards issued by CENELEC (European Committee for Electrotechnical Standardisation). These must be adopted by all EU member states by means of national regulatory bodies (in Italy, the CEI). For luminaires, the reference standards are IEC EN 605981 (CEI 34-21) and IEC EN 60598-2-22 (CEI 34-22, luminaires for emergency lighting). Conformity to these standards ensures that the luminaires are properly manufactured and can be used to build electrical systems that conform to the requirements stipulated by the applicable legislation (for example, Decree Law no. 37 of 22 January 2008).

A cut-out fuse incorporated in terminal block permits any short circuit to be limited to the luminaire affected. Standard equipment in versions with emergency and ballast; on request in electronic versions.

Protection against electric shock Standard IEC EN 60598-1 (CEI 34-21). Luminaires are divided into four classes according to the type of protection provided against electric shock.

466

Main features of the material

Safety precautions voltage

Class 0

No earthing protection device

Environment without earth

Class I

Earthing protection device provided

Connection to protective earth

Class II

Additional insulation but no earthing protection device

No precaution necessary

Class III

Intended for very low safety voltage

Connection to very low safety voltage

Symbols

III

Mechanics and Design From the design to the finished product For 3F Filippi, attention to detail, the quality of the light and the reliability of our products are the starting point on the path we travel alongside our customers. Efficiency is the culmination of our journey – we create a light that can show and give emotion, while hiding its technical soul, able to highlight what it illuminates. The right product starts first with a discussion, to gain an understanding of the customer's needs and expectations.

Our products are made with a craftsman's passion and constant innovation, research and attention to design and details: they combine aesthetics and functionality, elements of precision and new technologies, maintenance and reliability facilities, and are excellent value for money. 3F Filippi's entire production is performed inside the headquarters in Pian di Macina (province of Bologna, Italy), from moulding of plastics and metals to machining and soldering and painting, all totally automated. The thoroughness and precision of the checks throughout every phase of the company's processes guarantee constant quality of all our products over time.

3D modelling

Mould

EDM tool

Datasheets, product updates and specifications on our website: www.3f-filippi.com

467

Infopoint

Our care for the environment goes hand-in-hand with our 0-mile production, whereby all our products are assembled in the same Bologna plant where they are produced.

Mechanics Marks and standards Luminaires with electronic wiring bearing this mark are versions with limited surface temperature (EN 60598-2-24 and IEC 34-38), and therefore suitable for installation in environments with greater risk in case of fire as per variant V3 of IEC 64-8.

Luminaires not suitable for direct installation on normally flammable surfaces (suitable only for installation on non-flammable surfaces).

Note: the symbol is present in edition 9 of IEC EN 60598-1. Unless otherwise indicated by the above symbol, luminaires are suitable for installation on normally flammable surfaces. A surface is considered normally flammable if its ignition temperature is at least 200°C and if it does not deform or Flame and ignition resistance soften at such a temperature. 650°C, 850°C, 960°C. The materials in luminaires bearing this mark have passed the glowwire test at these temperatures in compliance with EN 60598-1 (IEC 34-21). Temperature class Standard 50014 defines the temperature classes as the maximum temperature of the external surface of the housing of the luminaire in the case of abnormal operation (EN 60598-1 Appendix C): T1 max 450°C, T2 max 300°C, T3 max 200°C, T4 max 135°C, T5 max 100°C, T6 max 85°C.

Mechanical strength Luminaires must have adequate mechanical strength and be built to sustain stress deriving from any unprotected treatment during normal use. Luminaires with a closing diffuser must pass a test with impact energy of 6.5J; impact is produced by letting a 50 mm diameter, 0.51 kg steel ball fall from a height of 1.3 metres, in compliance with IEC EN 605981 (CEI 34-21). The IK Code designates the level of protection of electrical equipment housings against mechanical impact (EN 62262 and IEC 70-4).

Ingress protection of housing (IP rating) As per EN 60598-1 (IEC 34-21). 1st number: protection against penetration by solid objects and against contact with live parts. 0 1 2 3 4 5 6

No special protection. Protected against solid objects larger than 50 mm. E.g. hands. Protected against solid objects larger than 12 mm. E.g. fingers. Protected against solid objects larger than 2.5 mm. E.g. tools. Protected against solid objects larger than 1 mm. E.g. threads or tapes. Protected against dust penetration that could damage the luminaire. Fully protected against dust.

2nd number: protection against penetration by liquids. 0

No special protection.

Protected against vertical water drips.

Protected against vertical water drips when tilted up to 15°.

Protected against rain when tilted up to 60°.

Protected against splashes of water from any direction.

Protected against jets of water coming from any direction.

Totally protected against sea waves or powerful jets of water.

Protection of housing from impacts (IK rating) Requirements as per IEC 34-139. Luminaires - application of code IEC 62262 IK 0.2 J

Resistance to a blow from an object weighing 200 g dropped from a height of 10 cm.

IK02

Coating and standard colours

0.5 J

Resistance to a blow from an object weighing 250 g dropped from a height of 20 cm.

IK04

1. Polyester-based paint, white or grey Ral 9006, UV stabilised, on hot galvanised steel sheet. Resistance to saline mist over 500hrs and damp resistance equal to 700hrs.

Resistance to a blow from an object weighing 500 g dropped from a height of 40 cm.

IK07

Resistance to a blow from an object weighing 1.7 kg dropped from a height of 30 cm. Resistance to a blow from an object weighing 10 J 5 kg dropped from a height of 20 cm. Resistance to a blow from an object weighing 20 J 5 kg dropped from a height of 40 cm. 5J

2. Epoxy-polyester powder-coated in white Ral 9010, or grey Ral 9006, UV stabilised, applied with triboelectric system for constant and uniform thickness, oven polymerised at 180°C, with phosphate degreasing pretreatment using heavy iron salts. Resistance to saline mist = 300h.

468

IK08 IK09 IK10

Mechanics Resistance to corrosive substances Chemical substance Acetone Acetic acid up to 10% Arsenic acid up to 20% Citric acid up to 10% Hydrochloric acid up to 20% Chromic acid Formic acid up to 30% Nitric acid up to 20% Sulphuric acid up to 30% Seawater Ethyl alcohol Isopropyl alcohol Ammonia Aniline Petrol Benzole Bromine White lime Diesel oils Sea climate Liquid chlorine (fumes) Chloroform Calcium chloride Ferric chloride Hexane Ether Petroleum ether Ethyl ether Phenols Glycerine Hydrocarbons Methanol Silicone oils Food oils and fats Mineral oils Vegetable oils Diesel oil - naphtha Ozone Potassium permanganate PVC with plasticizers Soda Caustic soda Zinc sulphate Aluminium sulphate Copper sulphate Carbon tetrachloride Toluene Trichloroethylene

Methacrylate – – • • • Δ Δ Δ • • – Δ • – • – – • • • – – • • • – • • – • – – Δ • • Δ – • • – • • • • • – – –

Polycarbonate Glass – Δ • • • Δ – Δ • • • – – – Δ – Δ Δ Δ • – – • Δ Δ – Δ – – Δ – – • Δ – • – – • – • – • • • – Δ –

The table only provides a rough indication of the maximum amount of various chemical agents in different compositions. When using these data, bear in mind that they are the results of laboratory tests and are therefore only valid under the same conditions in which the tests were performed; the data should therefore be considered indicative, and it is advisable to perform tests in their actual usage conditions if practical experience is not available.

Aluminium • • Δ • Δ Δ – Δ Δ Δ • • Δ • • • •

Δ – • • •

• • • • • • • • • • • • • – – • • •

Steel

Stainless steel

• – – Δ – Δ – – – Δ • Δ • • • Δ Δ – • Δ • • • Δ • • • • Δ • • Δ • • •

• Δ Δ Δ – Δ Δ – – Δ Δ Δ Δ • • Δ

• • Δ • – – • • • • • •

• Δ • • –

• • Δ – • Δ Δ Δ • • • • • • • • • •

Δ Δ Δ • • Δ

• • Δ – Δ Δ Δ – Δ Δ Δ • • • Δ • • Δ – Δ Δ Δ • • • • • •

• • • • • Δ • Δ Δ Δ • • Δ

Some versions of 3F luminaires are also proposed with laminated glass which, in addition to being resistant to the substances listed above, allows for these to be used in environments with food products or with machines with moving parts, with sudden temperature changes and, in general, in all environments requiring total protection against falling fragments.

The temperature and concentration of a chemical substance may significantly affect its compatibility with materials.

–

= resistant = relatively resistant, suitability to be evaluated on basis of application = not resistant

Datasheets, product updates and specifications on our website: www.3f-filippi.com

469

Infopoint

• Δ

Get the best from 3F Filippi How to use our products correctly

3F Filippi take the utmost care when designing and manufacturing our luminaires so that they stand the test of time. Below are some important indications on how to use our products correctly: following these will allow you to enjoy our products for as long as possible. • 3F Filippi can only guarantee products exclusively when they are installed according to the installation instructions provided with the luminaires. We therefore recommend you do not install our products in any other way than those indicated. In the event that you have differing requirements, please contact our Sales Network or the 3F Filippi Headquarters to request a technical assessment. • As with installation, maintenance of 3F Filippi products must also be performed according to the instructions: we therefore recommend keeping these safe so that you can consult them before performing any kind of work on the luminaire. • 3F Filippi products must only be installed on supports which are not subject to vibrations and mechanical stress – this is critical for their correct operation. In the event that it is not possible to avoid this kind of installation, you are invited to contact our Sales Network or the 3F Filippi Headquarters to request a technical assessment. • Turning on a luminaire leads to an environmental "load" which is often not justified. Despite 3F Filippi's commitment to offering our customers the best energy-saving systems, using lighting only when strictly necessary is still the best way to save money and respect the environment. • Correct and sensible lighting design can help save more money than you might think: 3F Filippi recommends that lighting projects are carried out by professional, reliable designers who can recommend the best solutions both for you and the environment. Lighting should only be used when necessary. • 3F Filippi strongly believe in reusing raw materials, and for this reason we are constantly optimising our products to make them more environmentally-friendly. For example, we use a high percentage of recycled board in our packaging, and our luminaires are all produced in a single plant powered by solar panels: these simple measures allow us to limit transport and optimise resources. 3F Filippi invites users to do the same by recycling packaging after installation and correctly disposing of luminaires at the end of their life-cycle.

470

Analytical guide

Price list June 2016 General conditions of sale The acceptance of orders is always subject to the following conditions: • Delivery deadlines are not binding. • Goods are delivered ex-works. • Samples are always supplied carriage forward and invoiced. • Goods travel at the customer’s risk with any means of shipment, both carriage forward and carriage paid. • The purchaser may not demand the partial or total cancellation of orders nor indemnification for delays and reductions of supply caused by force majeure. • Prices in this list are subject to change without notice or any obligation to communicate this in advance. • Payments will be valid if made directly to our headquarters. • VAT is payable by the customer. • The Court in whose district the seller has its headquarters will have exclusive jurisdiction in the event of any and all disputes.

Articles on request Articles marked On Request are not normally in our warehouse. Where not specified, delivery dates and prices are to be arranged from time to time based on quantity, production availability, and material procurement times. Because we are constantly improving our products, the luminaires supplied may differ in details, dimensions, equipment, and accessories from the dimensions and illustrations shown in this catalogue. Therefore, quantities, volumes, and indicated weights are not binding.

Datasheets, product updates and specifications on our website: www.3f-filippi.com

471

Infopoint

Sale through electrical distributors

Fuse accessory The fuse accessory consists of a rigid wire, cross section 1.5 mm², type H07V2-U, connected to the fuse holder with cylindrical 5x20 mm rapid fuse of adequate capacity. Interrupt rating 35A for glass version, 1500A for ceramic version. The wire shall be connected to the live pole on the luminaire terminal block. The live phase wire shall be screwed to the available pole of the fuse holder, which has maximum capacity of 2.5 mm². Pack and price for 100 pcs

Luminaire of luminaire T5 lamps 1x14-21-24-28-35-39-49-54W 2x14-21-24-28W 3x14W T8 lamps 1x18-36W 2x18W Compact lamps 1x7-11-13-18-26-32W 2x11-13*-18*W Round lamps 1x22-32W

Fuse nominal current

Code with glass fuse

with ceramic fuse

T8 lamps 3x36-58W 4x36W Compact lamps 3x24-55W 2A

A01385

A01404

Pack and price for 100 pcs

472

Code Fuse with nominal with glass ceramic current fuse fuse

A01389

A01408

6.3A

A01391

A01410

Pack and price for 100 pcs T5 lamps 4x49-80W T8 lamps 4x58W Compact lamps 4x55W

Pack and price for 100 pcs T5 lamps 1x80W 2x35-39-49-54-80W 3x24-28W 4x14-24-28W T8 lamps 1x58W 2x36-58W 3x18W 4x18W Compact lamps 1x40-42-55-57W 2x13**-18**-24-26-32-40-4255W Round lamps 1x40-55-60W

Luminaire of luminaire

Pack and price for 100 pcs

Notes:

3.15A

A01387

A01406

* Version with two-lamp electronic ballast ** Version with starter ballast

Analytical guide Packing Code

Packing

Item

Pallets Pcs

m³

Page

Code

Item

Pallets Pcs

m³

Page

A0006

Fil 180 CP620 Structure

1 0.012

A0173

15HI

150 0.033

189, 196 206, 222

A0008

Fil 180 CP1240 Structure

1 0.021

3.82

A0174

15DP

200 0.033

215

A0009

Fil 180 CP1550 Structure

1 0.026

4.65

A0175

15GF

200 0.033

215

A0011

Fil 220 CP620 Structure

1 0.015

2.26

A0176

15XB

150 0.033

215

A0013

Fil 220 CP1240 Structure

1 0.026

4.15

A0177

15ZH

200 0.033

182, 189, 196 203, 215, 222

A0014

Fil 220 CP1550 Structure

1 0.031

5.13

A0179

15LB

200 0.033

182

A0016

32 IF (PVC closing top Fil 180-620)

25 0.012

5.75

A0187

Anti-condensation cable gland

50 0.004

227, 335, 369

A0018

32 MH (PVC closing top Fil 180-1240)

25 0.024

10.75

A0189

Reinforcing bracket Lucequadro for pan./plast.

20 0.008

9.6

132

A0019

32 HA (PVC closing top Fil 180-1550)

25 0.030

13.25

A0194

Diffuser IP44 (3F Dodeca 220)

20 0.026

152

A0021

Fil 180 AB620 (steel closing top)

16 0.020

A0195

Transparent glass (3F Dodeca 220, 220 AC)

5 0.012

1.7

152

A0023

Fil 180 AB1240 (steel closing top)

16 0.039

13.76

A0196

Moulded glass (3F Dodeca 220, 220 AC)

5 0.012

1.7

152

A0024

Fil 180 AB1550 (steel closing top)

16 0.048

16.48

A0197

Transparent glass (3F Dodeca 300)

4 0.011

2.52

152

A0026

Fil 220 AB620 (steel closing top)

8 0.012

5.2

A0198

Moulded glass (3F Dodeca 300)

4 0.011

2.52

152

A0028

Fil 220 AB1240 (steel closing top)

8 0.021

8.32

A0202

False ceiling bracket - for luminaire D.220

10 0.020

139, 152

A0029

Fil 220 AB1550 (steel closing top)

8 0.026

10.8

A0203

False ceiling bracket- for luminaire D.300

10 0.039

152

A0030

Fil 180 CC (continuous channel kit)

150 0.039

6.6

A0204

Grid bracket h40mm - for luminaire D.220

10 0.081

7.5

139, 153

A0031

Fil 220 CC (continuous channel kit)

100 0.039

4.5

A0205

Grid bracket h40mm - for luminaire D.300

10 0.157

11.5

153

A0033

Fil 180 DT (element for branch)

50 0.033

5.65

A0210

Wireguard 3F Cub

1 0.095

389

A0034

Pair of white cylinders

70 0.033

3.99

32, 82

A0213

Ceiling-mounted bracket

10 0.033

8.2

116, 389

A0035

Aluminium tube 1.5 m white

10 0.030

32, 82

A0214

Metal pan. reinforcing bracket (3F Dodeca 220)

10 0.095

139, 153

A0036

Fil 180 BL (box for branch)

6 0.053

14.1

A0215

Metal pan. reinforcing bracket (3F Dodeca 300)

8 0.095

10.8

153

A0037

Fil 220 BL (box for branch)

6 0.053

15.51

A0400

16 CLE (wide recup.Linda 2x18)

20 0.005

336

A0038

White articulated connecting element

30 0.039

4.5

A0401

16 MRA (wide recup. Linda 2x36)

20 0.010

336

A0039

Pair of white end caps Fil 180

35 0.033

5.25

83, 280

A0402

16 GPA (wide recup. Linda 2x58)

20 0.012

5.5

336

A0040

Pair of white end caps Fil 220

35 0.039

6.3

A0406

16 HZD (super wide. recup. Linda 2x18 )

20 0.005

336

A0042

Fil 180 SS (sliding bracket)

100 0.033

83, 280

A0407

16 NBH (super wide. recup. Linda 2x36)

20 0.010

336

A0043

Fil 220 SS (sliding bracket)

80 0.033

15.2

A0408

16 PCL (super wide. recup.Linda 2x58

20 0.012

5.5

336

A0045

Adjustable suspension for channel 1m

40 0.039

11.6

84, 280

A0412

16 DRI (conc. recup.L 2x18)

20 0.005

336

A0046

Adjustable suspension for channel 1.5m

40 0.039

84, 280

A0413

16 REC (conc. recup.Linda 2x36)

20 0.010

336

A0047

Adjustable suspension for channel 2m

40 0.039

13.6

84, 280

A0414

16 LZC (conc. recup.Linda 2x58)

20 0.012

5.5

336

A0051

34 MF (variable lamp focusing Fil 220 T8)

200 0.033

3.6

A0418

16 EFG (conc. recup.Linda LA 1x18)

20 0.005

336

A0052

Fil 15 FP (wall-mounting bracket Fil 180)

50 0.033

A0419

16 QST (conc. recup.Linda LA 1x36)

20 0.010

336

A0053

Fil 19 BF (cable clip)

20 0.033

5.5

A0420

16 ATB (conc.recup. Linda LA 1x58)

20 0.012

5.5

336

A0058

Flat diffuser PC transp. Fil180 36 sing.

50 0.021

A0424

16 SNN (conc. recup.Linda 1x18)

20 0.002

1.5

337

A0059

Flat diffuser PC transp. Fil180 58 sing.

40 0.026

20.2

A0425

16 THO (conc. recup.Linda 1x36)

20 0.004

337

A0060

21 V2 (PC diffuser 58W Fil180/3F1)

20 0.059

A0426

16 UIP (conc. recup.Linda 1x58)

20 0.005

337

A0061

21 V0 (PC diffuser 58W Fil180/3F1)

20 0.059

A0430

16 FAS (asym. rec. Linda LA 1x18)

20 0.005

337

A0062

21 V2C (PC diffuser 36W Fil180/3F1)

20 0.064

A0431

16 GDM (asym. rec. Linda LA 1x36)

20 0.010

337

A0063

21 V0C (PC diffuser 36W Fil180/3F1)

20 0.064

A0432

16 BZF ( asym. rec. Linda LA 1x58)

20 0.012

5.5

337

A0064

21 RD (PC single diffuser transp. 36 WFil220)

25 0.021

10.25

A0436

16 VMR (asym. recup. Linda 1x18)

20 0.002

1.5

337

A0065

21 AT (PC single diffuser transp. 58 WFil220)

25 0.026

12.75

A0437

16 ZOQ (asym. recup. Linda 1x36)

20 0.004

337

A0066

Strength. Brack.+Connect. Kit - Fil 180

10 0.011

A0438

16 XGS (asym. recup. Linda 1x58)

20 0.005

337

A0067

Strength. Brack.+Connect. Kit - Fil 220

10 0.011

A0447

3F Linda though line L1570

50 0.069

335

A0090

Bracket/5-pole terminal block

100 0.033

32, 41

A0449

15 GZI (w/brack. Linda L300)

20 0.005

334

A0114

Rose 110 (Adjust. susp.1m wired with 5-pole cable)

25 0.039

12.25

83, 280

A0450

15 RIT (w/brack.+ hooks Linda L660-1270-1570)

20 0.005

2.5

334

A0124

Rose 110 (Adjust. susp.1m unwired)

50 0.039

8.5

83, 280

A0451

15 MBI (w/brack. Linda L300)

20 0.011

334

A0125

Rose 110 (Adjust. susp.1m wired with 4-pole cable)

25 0.039

A0452

15 FBR (w/brack.+ hooks Linda L660-1270-1570)

20 0.011

334

A0128

Rose 86 (5-pole wired boss)

25 0.039

8.75

281

A0455

Wire guard 180x1330 03F/Linda

1 0.016

3.5

334

A0130

Rose 86 (4-pole wired boss)

25 0.039

8.5

40, 84

A0456

Wire guard 180x1330 03F/Linda

1 0.020

334

A0160

Inox clips 3F Linda L660-4pcs

140 0.033

334

A0457

Wire guard280x1330 03F/Linda/Beta

1 0.024

334, 369

A0161

Inox clips 3F Linda L1270-8pcs

125 0.033

12.5

334

A0458

Wire guard 280x1630 03F/Linda/Beta

1 0.030

4.5

334, 369

A0162

Inox clips 3F Linda L1570-10pcs

100 0.033

334

A0462

13 GSI (pair of susp. hooks Linda L300)

50 0.007

334

A0164

Pair of closing end caps L 450 T5

1 0.004

.18

206

A0463

13 TRM (pair of susp. hooks Linda L660-1270-1570)

50 0.007

3.5

334

A0170

15BS

200 0.033

24.6

182, 203, 215

A0464

26 CSG (pictogram P1 Linda L300)

100 0.006

2.5

335

473

Analytical guide Packing Code

Packing

Item

Pallets Pcs

Page

Code

Item

m³

100 0.013

2.5

335

A0674

16 FGP (s. wide recup. Linda 2x28 T5)

Pallets Pcs

Page

m³

20 0.010

336

A0465

26 MTH (pictogram P1 Linda L660)

A0466

26 DVI (pictogram P2 Linda L300)

100 0.006

2.5

335

A0675

16 VBC (s. wide recup. Linda 2x35-49 T5 )

20 0.012

5.5

336

A0467

26 MVL (pictogram P2 Linda L660)

100 0.013

2.5

335

A0676

16 CZA (conc. recup.Linda 2x14 T5)

20 0.005

336

A0468

26 GZM (pictogram P3 Linda L300)

100 0.006

2.5

335

A0677

16 TLS (conc. recup.Linda 2x28 T5)

20 0.010

336

A0469

26 PXN (pictogram P3 Linda L660)

100 0.013

2.5

335

A0678

16 GHR (conc. recup. Linda 2x35-49 T5)

20 0.012

5.5

336

A0477

Safety wire

125 0.033

6.25

182, 189

A0682

16 ZRB (conc. recup.Linda 1x14 T5)

20 0.002

1.5

337

A0483

Sliding bracket Barraluce L

400 0.033

236

A0683

16 UCL (conc. recup.Linda 1x28 T5)

20 0.004

337

A0490

Connection to the earth

1000 0.011

261

A0684

16 EDW (conc. recup.Linda 1x35-49-80 T5)

20 0.005

337

A0500

13 DH (pair of susp. galvanised steel hooks i3F)

200 0.033

369

A0688

16 KXH (asym. recup. Linda 1x14 T5)

20 0.002

1.5

337

A0501

13 HC (pair of susp. stainless steel hooks A3F)

200 0.033

369

A0689

16 NQE (asym. recup. Linda 1x28 T5)

20 0.004

337

A0503

15 CD (pair of bracket and hooks A3F)

100 0.033

369

A0690

16 WAZ ( asym. rec. Linda 1x35-49-80 T5)

20 0.005

337

A0508

20 TKA (casc. conn. line i3F/A3F 36)

50 0.069

369

A0693

Suspension with adjustment for Barraluce P - 1m

122

A0509

20 ZFE (casc. conn. line i3F/A3F 58)

50 0.069

369

A0694

Suspension with adjustment for Barraluce P - 2 m

122

A0528

Wireguard Beta 4x54-6x54

1 0.095

6.5

376

A0695

Suspension with adjustment for Barraluce P - 3 m

122

A0529

Wireguard Beta 4x58/80-6x49

1 0.117

376

A0696

Suspension with adjustment for Barraluce P - 4 m

122

A0601

White linear connecting element 40 mm

30 0.039

A0697

Suspension with adjustment for Barraluce P - 5 m

122

A0602

White linear connecting element 200 mm

10 0.039

8.5

A0698

Suspension with adjustment for Barraluce P - 6 m

122

A0603

White linear connecting element 500 mm

6 0.039

6.45

A0714

Clamp 2 holes - 100 pcs

A0604

White linear connecting element 1100 mm

10 0.124

32.5

A0716

Coil galvanized cable diam. 1.5mm - 100m

259

A0605

White joint 3F Canda/wall 600 mm

10 0.039

20.5

A0717

Coil galvanized cable diam. 1.5mm - 500m

7.2

259

A0606

White joint 3F Canda/wall 1100 mm

10 0.124

31.9

A0718

Coil galvanized cable diam. 1.5mm - 1000m

12.2

259

A0607

Pair of white cylinders 3F Canda

70 0.033

3.5

A0720

Wieland (white plug)

50 0.011

183, 189

A0608

White Alluminium Tube Ø.20 mm 1,5 m

14 0.012

4.34

A0721

Wieland (white plug)

50 0.011

183, 189

A0609

White wall-mounting boss 3F Canda

100 0.011

A0722

Ensto (white plug+ adapter)

50 0.011

183, 189

A0610

Fixed suspension with case 0.3 m

40 0.039

A0725

Wieland (black plug)

50 0.011

183, 189

A0611

Fixed suspension with case 0.5 m

40 0.039

8.2

A0726

Wieland (black plug)

50 0.011

183, 189

A0612

Fixed suspension with case 0.8 m

40 0.039

8.4

A0727

Ensto (black plug+ adapter)

50 0.011

183, 189

A0613

Fixed suspension with case 1 m

40 0.039

8.6

A0762

Adjustable suspension for channel 3m

40 0.039

84, 280

A0614

Wired fixed suspension with case 0.3 m

20 0.039

A0766

Adjustable suspension for channel 4m

40 0.039

20.8

84, 280

A0615

Wired fixed suspension with case 0.5 m

20 0.039

9.2

A0770

Adjustable suspension for channel 6m

40 0.039

24.4

84, 280

A0616

Wired fixed suspension with case 0.8 m

20 0.039

9.4

A0846

Flat diffuser PC transp. Fil180 28-54 sing.

50 0.021

7.5

A0617

Wired fixed suspension with case 1 m

20 0.039

9.6

A0847

Flat diffuser PC transp. Fil180 35-49 -80 sing.

50 0.026

9.5

A0618

Adjustable suspension with case 1 m

40 0.039

9.4

A0848

Flat diffuser PC transp. Fil180 28-54 chan.

50 0.021

7.75

A0619

Wired adjustable suspension with case 1 m

20 0.039

A0849

Flat diffuser PC transp. Fil180 35-49 -80 chan.

50 0.026

9.75

A0620

Spool with stainless steel cable diam. 1,25mm 100 m

1 0.011

62, 84 96, 280

A0862

Flat diffuser PC transp. Fil220 28-54 sing.

50 0.021

A0622

Clamp 1 hole - 100 pcs

100 0.004

.35

62, 84 96, 281

A0863

Flat diffuser PC transp. Fil220 35-49-80 sing.

50 0.026

11.75

A0623

Pair of spacers 3F Canda 60 mm ceiling

20 0.039

9.8

A0864

Flat diffuser PC transp. Fil220 28-54 chan.

50 0.021

10.25

A0629

White sliding bracket 3F Canda

80 0.033

A0865

Flat diffuser PC transp. Fil220 35-49-80 chan.

50 0.026

A0631

Pair of white wall-mounting brackets 3F Canda

50 0.033

A0869

Grey connecting element with boss for luminaires

10 0.012

3.5

A0634

Casc. conn. Line 5x1.5 3F Canda 1300

50 0.069

9.5

A0870

White connecting element with boss for luminaires

10 0.012

3.5

A0635

Casc. conn. Line 5x1.5 3F Canda 1600

50 0.069

10.5

A0871

Grey connecting element to wall with boss for luminaires

10 0.033

3.4

A0645

Semi-recessed bracket (3F Canda Quadrato)

10 0.012

A0872

White connecting element to wall with boss for luminaires

10 0.033

3.4

A0652

Couple of brackets for ceiling installation - 3F LEM

20 0.011

303

A0875

Connecting bracket for linear channels or branches

100 0.033

A0653

Couple of fixing carabiniers for chain installation - 3F LEM

20 0.011

303

A0877

Bracket for T-branch for 3F Travetta

100 0.033

A0660

Suspension with adjustment for 3F Zeta - 1m

100 0.033

A0878

Bracket for X-branch for 3F Travetta

100 0.033

A0661

Suspension with adjustment for 3F Zeta - 2 m

100 0.033

12.5

A0880

Connecting element 190x190 3F Travetta GR

12 0.039

11.16

A0662

Suspension with adjustment for 3F Zeta - 3 m

100 0.033

A0882

Connecting element 190x210 3F Travetta GR

12 0.039

9.6

A0663

Suspension with adjustment for 3F Zeta - 4 m

100 0.033

13.5

A0883

Connecting element 190x510 3F Travetta GR

4 0.039

7.6

A0664

Suspension with adjustment for 3F Zeta - 5 m

100 0.033

A0884

Connecting element 190x810 3F Travetta GR

7 0.124

21.56

A0665

Suspension with adjustment for 3F Zeta - 6 m

100 0.033

14.5

A0885

Connecting element 190x1110 3F Travetta GR

7 0.124

29.4

A0670

16 PSG ( wide recup. Linda 2x14 T5 )

20 0.005

336

A0892

White connecting element 190x190 3F Travetta GR

12 0.039

11.16

A0671

16 RTA (wide recup. Linda 2x28 T5)

20 0.010

336

A0894

White connecting element 190x210 3F Travetta GR

12 0.039

9.6

A0672

16 BMT (wide recup. Linda 2x35-49 T5)

20 0.012

5.5

336

A0895

White connecting element 190x510 3F Travetta GR

4 0.039

7.6

A0673

16 ALN (s. wide recup. Linda 2x14 T5 )

20 0.005

336

A0896

White connecting element 190x810 3F Travetta GR

7 0.124

21.56

474

100

259

Analytical guide Packing Code

Packing

Item

Pallets Pcs

m³

Page

Code

Item

Pallets Pcs

m³

Page

A0897

White connecting element 190x1110 3F Travetta GR

7 0.124

29.4

A4184

Aluminum bracket for suspension installation

.03

269

A0937

Connecting element lum/wall 810 3F Travetta GR

8 0.124

22.8

A4185

Controller for suspension

.02

269

A0938

Connecting element lum/wall 1110 3F Travetta GR

8 0.124

31.6

A4186

Rose chromed brass ceiling mounting cable

.01

269

A0941

White connecting element lum/wall 810 3F Travetta

8 0.124

22.8

A4187

Cable suspension with ball - L = 2000

.025

269

A0942

White connecting element lum/wall 1110 3F Travetta

8 0.124

31.6

A4188

Linear connecting element - B

.05

267

A0945

Branches elem.190x310 3F Travetta GR

8 0.039

8.8

A4190

Feeding head SX - GR

265

A0946

Branches elem.190x460 3F Travetta GR

4 0.039

6.6

A4191

L-joint - INT - GR

268

A0951

White branches elem. 190x310 3F Travetta

8 0.039

8.8

A4192

T-joint - EXT + DX - GR

.29

268

A0952

White branches elem. 190x460 3F Travetta

4 0.039

6.6

A4193

T-joint - INT + SX - GR

.29

268

A3001

Controller HCL Basic

431

A4194

T-joint - INT + DX - GR

.29

268

A3002

Controller HCL Plus

431

A4196

feeding head SX - B

265

A3003

Touch Panel HCL

.07

431

A4197

L-joint - INT - B

268

A3004

Clock Module

.02

431

A4198

T-joint - EXT + DX - B

268

A3008

Repeater DALI ext

416

A4199

T-joint - INT + SX - B

.29

268

A3009

Repeater DALI DIN

416

A4200

T-joint - INT + DX - B

268

A3010

Box for Repeater DALI

.13

416

A5012

Kit LED i3F 75,A3F 90 - L1565 - 2x30W CONC + PC

1 0.039

351

A3011

Sensor A DALI

.25

425

A5026

Kit LED i3F 75,A3F 90 - L1565 - 2x30W + PC

2 0.039

4.6

351

A3012

Sensor A DALI ext

.25

425

A5057

Kit LED i3F 75,A3F 90,A3F 92 - L1265 - 2x18W + PC

2 0.031

5.2

351

A3013

Sensor A on/off

.25

425

A5103

Kit LED i3F 76,A3F 91 - L1565 - 2x30W CONC

1 0.039

2.7

351

A3014

Sensor A on/off-ext

.25

425

A5117

Kit LED i3F 76,A3F 91 - L1565 - 2x30W

2 0.030

351

A3015

Sensor B Dual-DALI

.28

426

A5148

Kit LED i3F 76,A3F 91,A3F 93 - L1265 - 2x18W

2 0.024

3.2

351

A3016

Sensor B DALI ext

.28

425

A5184

Printed glass Beta 2x i3F 76 - L1565

3 0.039

14.4

352

A3017

Sensor B DALI

.28

425

A5185

Printed glass Beta 2x i3F 76 - L1265

3 0.031

352

A3018

Sensor B on/off

.28

425

A01314 White rectangular case suspension- fixed 0,3m

50 0.039

5.5

A3019

Sensor B on/off-ext

.28

425

A01315 White rectangular case suspension- fixed 0,5m

50 0.039

A3020

Programmer IR

.08

426

A01317 White rectangular case suspension- fixed 1m

50 0.039

A3021

Remote controller IR

426

A01318 White rectangular case suspension-adj. 1 m

50 0.039

7.5

61, 96

A3022

IR-Adapter for Smartphone

.08

426

A01321 Wired susp. 5P white rectangular case-fixed 0,3m

20 0.039

7.8

A4151

Binario 3F - L1000 - B

1.1

265

A01322 Wired susp. 5P white rectangular case-fixed 0,5m

20 0.039

8.2

A4152

Binario 3F - L2000 - B

2.2

265

A01324 Wired suspension 5P white rectangular case-fixed 1m

20 0.039

10.6

A4153

Binario 3F - L3000 - B

3.3

265

A01325 Wired suspension 5P white rectangular case-adj.1 m

20 0.039

61, 96

A4154

Binario 3F - L4000 - B

4.4

265

A01350 Presence and light sensor Fly2 B

5 0.011

1.25

A4158

Binario 3F - L1000 - GR

1.1

265

A01351 Presence and light sensor Fly2 GR

5 0.011

1.25

A4159

Binario 3F - L2000 - GR

2.2

265

A01353 Connecting element for Fly2 GR

1 0.007

.32

A4160

Binario 3F - L3000 - GR

3.3

265

A01368 Travetta B joint closing cap

10 0.011

A4161

Binario 3F - L4000 - GR

4.4

265

A01370 Travetta GR joint closing cap

10 0.011

A4166

Feeding head DX - GR

265

A01385 Fuse-holder and glass fuses 2A

100 0.011

472

A4167

Central feeding - GR

266

A01387 Fuse-holder and glass fuses 3.15A

100 0.011

472

A4168

Flexible connecting element - GR

.21

267

A01389 Fuse-holder and glass fuses 4A

100 0.011

472

A4169

L-joint - EXT - GR

268

A01391 Fuse-holder and glass fuses 6.3A

100 0.011

472

A4170

T-joint - EXT + SX - GR

.29

268

A01404 Fuse-holder and ceramic fuses 2A

100 0.011

472

A4171

Cross joint - GR

.39

269

A01406 Fuse-holder and ceramic fuses 3.15A

100 0.011

472

A4172

End cap - GR

.01

266

A01408 Fuse-holder and ceramic fuses 4A

100 0.011

472

A4173

PVC closing top - L1000 - GR

.07

269

A01410 Fuse-holder and ceramic fuses 6.3A

100 0.011

472

A4174

Feeding head DX - B

265

A01417 Pair end caps Barraluce L channel diffuser

1 0.011

236

A4175

Central feeding - B

266

A01418 Pair end caps Barraluce L channel louvre

1 0.011

236

A4176

Flexible connecting element - B

.21

267

A01420 Couple brackets for Barraluce L

236

A4177

L-joint - EXT - B

268

A01423 Linear connecting elements Barraluce

1 0.011

122, 236

A4178

T-joint - EXT + SX - B

.29

268

A01429 Sliding bracket for Barraluce P

1 0.011

122

A4179

Cross joint - B

.39

269

A01434 Pair of end caps for Barraluce L channels with diffuser

1 0.011

122

A4180

End cap - B

.01

266

A01457 Susp with Rose 110 – Adj 1m – Cable 2m

25 0.039

12.25

A4181

PVC closing top - L1000 - B

.07

269

A01523 Grid bracket h50mm - for luminaire D.220

10 0.081

139, 152

A4182

Linear connecting element - GR

.05

267

A01524 Grid bracket h50mm - for luminaire D.300

10 0.157

153

A4183

Steel bracket for ceiling mounting

.02

269

A02484 5P socket/plug terminal block Beginning/End Channel

50 0.011

122, 236, 281

475

Analytical guide Packing Code

Packing

Item

Pallets Pcs

Page

m³

A02562 Caddy for exposed profiles of 24 mm

20 0.004

14, 258

A02597 Branch 50cm, plug-socket 5P

10 0.008

A20018 3F Linux S 5P L3556

2 0.021

A20019 3F Linux S 5P L1778

2 0.021

A20025 3F Linux S 7P L3556

Code

Item

Pallets Pcs

Page

m³

A20512 3F Linux DR 2x22 LED L1778

1 0.019

257

281

A20525 3F Linux DR 2x30 LED DALI L1778

1 0.019

257

247

A20526 3F Linux DR 2x22 LED DALI L1778

1 0.019

247

1435

03F 1x18

1 0.008

1.95

180s

111

2 0.021

8.4

247

1436

03F 1x36

1 0.015

3.13

90s

111

A20026 3F Linux S 7P L1778

2 0.021

4.4

247

1437

03F 1x58

1 0.019

90s

111

A20083 3F Linux L 60 LED BAT L1778

1 0.019

2.65

249

1438

03F 2x18

1 0.012

2.51

120s

111

A20084 3F Linux L 50 LED BAT L1778

1 0.019

2.65

249

1439

03F 2x36

1 0.023

4.8

60s

111

A20085 3F Linux L 40 LED BAT L1778

1 0.019

2.65

249

1440

03F 2x58

1 0.028

6.4

60s

111

A20097 3F Linux L 60 LED DALI BAT L1778

1 0.019

2.7

249

1441

03F 3x36

1 0.028

6.67

42s

111

A20098 3F Linux L 50 LED DALI BAT L1778

1 0.019

2.7

249

1443

03F 1x22

1 0.011

2.26

108s

111

A20099 3F Linux L 40 LED DALI BAT L1778

1 0.019

2.7

249

1444

03F 1x32

1 0.011

2.38

108s

111

A20125 3F Linux L 60 LED AMPIO L1778

1 0.019

2.65

249

1445

03F 2x32+40

1 0.017

3.7

68s

111

A20126 3F Linux L 50 LED AMPIO L1778

1 0.019

2.65

249

1446

03F 4x18

1 0.034

6.1

35s

111

A20127 3F Linux L 40 LED AMPIO L1778

1 0.019

2.65

249

1575

Mira Par 1x55 C HF

1 0.013

3.5

90s

A20139 3F Linux L 60 LED DALI AMPIO L1778

1 0.019

2.7

249

1576

Mira Par 2x55 C HF

1 0.013

3.7

90s

A20140 3F Linux L 50 LED DALI AMPIO L1778

1 0.019

2.7

249

1577

Mira Par 1x36 HF

1 0.024

5.55

46s

257

A20141 3F Linux L 40 LED DALI AMPIO L1778

1 0.019

2.7

249

1578

Mira Par 1x58 HF

1 0.030

6.85

46s

A20167 3F Linux L 60 LED CONC L1778

1 0.019

2.65

250

1580

Mira Par 2x36 HF

1 0.024

5.8

46s

A20181 3F Linux L 60 LED DALI CONC L1778

1 0.019

2.7

250

1581

Mira Par 2x58 HF

1 0.030

7.15

46s

A20335 3F Linux D 2x30 LED L1778

1 0.019

255

1594

Mira Par DE 2x28-54 T5 HF

1 0.024

5.8

90s

A20336 3F Linux D 2x22 LED L1778

1 0.019

255

1597

Mira Par DE 2x14-24 T5 HF

1 0.013

3.7

90s

A20349 3F Linux D 2x30 LED DALI L1778

1 0.019

255

1598

Mira Par DE 2x35-49-80 T5 HF

1 0.024

7.2

90s

A20350 3F Linux D 2x22 LED DALI L1778

1 0.019

255

1949

3FI GER 1x15

1 0.011

2.95

50s

409

A20433 Linear connecting element for 3F Linux

10 0.011

259

1950

3FI GER 1x30

1 0.019

4.43

100s

409

A20434 T-Connecting element for 3F Linux

259

1959

Mira Par LED 4x12W IND L675

1 0.013

3.7

90s

A20436 L-Connecting element 3F L Linux

259

1961

Mira Par LED DE 4x12W L675

1 0.013

3.6

90s

A20442 Closing Top between 3F Linux L or D - L1778

5 0.019

260

2002

L 323x18 LD HF 2M

2 0.064

8.8 4s+15d

168

A20443 Closing Top for luminaires - L1778

10 0.019

3.6

260

2003

L 324x18 LD HF DA 2M

2 0.064

9.8 4s+15d

168

A20448 Pair of closing end 3F Linux

100 0.033

260

2012

L 323x18 HF 2MG

2 0.064

8.4 4s+15d

170

A20450 Sliding bracket with regulator for suspension installation

250 0.033

258

2013

L 324x18 HF DA 2MG

2 0.064

9.4 4s+15d

170

A20451 Sliding bracket for ceiling installation

400 0.033

258

2022

L 323x18 LD HF 2US

2 0.064

8.8 4s+15d

172

A20452 Stainless steel hook for chain

400 0.033

14, 258

2023

L 324x18 LD HF DA 2US

2 0.064

9.8 4s+15d

172

A20453 S-shaped chain hook with sliding bracket 3F Linux

258

2032

L 323x18 HF 2S

2 0.064

8.4 4s+15d

174

A20454 5-poles socket-pin terminal block 3F Linux S

260

2033

L 324x18 HF DA 2S

2 0.064

9.4 4s+15d

174

A20455 7-poles socket-pin terminal block 3F Linux S

260

2052

L 323x18 LD HF 3AO

2 0.064

8.8 4s+15d

176

A20459 5-poles socket-pin branch (L-shaped) 3F Linux S

259

2053

L 324x18 LD HF DA 3AO

2 0.064

9.8 4s+15d

176

A20460 7-poles socket-pin branch (L-shaped) 3F Linux S

259

2175

L 324x14 T5 LD HF SP IP54

1 0.037

5.8

28s

179

A20464 5-poles socket-pin branch (T-shaped) 3F Linux S

259

2177

L 324x14 T5 LD HF EP SP IP54

1 0.037

6.5

28s

179

A20465 7-poles socket-pin branch (T-shaped) 3F Linux S

259

2190

L 322x28 T5 LD HF 2MG

1 0.037

6.1

33s

169

A20470 Pair of mounting brackets 3F devices on Linux S

260

2191

L 323x28 T5 LD HF 2MG

1 0.077

9.6

14s

169

A20474 Safety screw for locking the sliding bracket

1 0.011

.01

258

2192

L 322x28 T5 LD HF 2S

1 0.037

6.1

33s

173

A20476 Single contact pin

50 0.005

12.5

261

2193

L 323x28 T5 LD HF 2S

1 0.077

9.6

14s

173

A20479 Power cable for luminaires, 3-pole

261

2222

L 403x18 HF 3AO

2 0.076

10.9 2s+13d

202

A20480 Power cable for luminaires, 5-pole

261

2223

L 404x18 HF 3AO

2 0.076

11.2 2s+13d

202

A20486 Suspension without adjustment for 3F Linux - 1m

100 0.033

1 8

258

2224

L 403x18 HF SP

2 0.076

11.7 2s+13d

202

A20487 Suspension without adjustment for 3F Linux - 2 m

100 0.033

258

2225

L 404x18 HF SP

2 0.076

12.1 2s+13d

202

A20488 Suspension without adjustment for 3F Linux - 3 m

100 0.033

258

2226

L 403x18 HF 2US

2 0.076

12.7 2s+13d

200

A20489 Suspension without adjustment for 3F Linux - 4 m

100 0.033

258

2227

L 404x18 HF 2US

2 0.076

12.7 2s+13d

200

A20490 Suspension without adjustment for 3F Linux - 5 m

100 0.033

258

2241

L 403x18 HF 2S

2 0.076

10.9 2s+13d

201

A20491 Suspension without adjustment for 3F Linux - 6 m

100 0.033

258

2242

L 404x18 HF 2S

2 0.076

11.2 2s+13d

201

Central feeding 5-poles socket-pin terminal block 3F Linux A20500 S

260

2244

L 403x18 HF 2M

2 0.076

10.9 2s+13d

199

Central feeding 7-poles socket-pin terminal block 3F Linux A20501 S

260

2245

L 404x18 HF 2M

2 0.076

11.2 2s+13d

199

A20511 3F Linux DR 2x30 LED L1778

1 0.019

257

2247

L 403x18 HF 2MG

2 0.076

10.9 2s+13d

200

476

Analytical guide Packing Code

Packing

Item

Pallets Pcs

m³

Page

Code

Item

Pcs

m³

Pallets

Page

2248

L 404x18 HF 2MG

2 0.076

11.2 2s+13d

200

2930

L 324x14 T5 LD HF 2S

2 0.061

8.8 4s+15d

173

2532

L 583x55 C LD HF CR RVS

1 0.053

10.5

18s

219

2931

L 323x14 T5 LD HF 2S

2 0.061

8.6 4s+15d

173

2534

L 583x55 C LD HF CR 2US VT

1 0.053

18s

221

2932

L 324x14 T5 LD HF EP 2S

1 0.030

4.9

32s

173

2578

L 593x55C HF RVS

1 0.054

11.5

20s

225

2933

L 323x14 T5 LD HF EP 2S

1 0.030

4.8

32s

173

2589

L 593x55C HF 2US VT

1 0.054

11.5

20s

226

2934

L 324x14 T5 LD HF DA 2S

2 0.061

9.2 4s+15d

173

2760

L 324x18 HF 2S

2 0.064

8.4 4s+15d

174

2935

L 324x14 T5 LD HF DA EP 2S

1 0.030

5.1

32s

173

2761

L 324x18 HF EP 2S

1 0.031

4.7

32s

174

2978

L 324x14 T5 LD HF SPA

2 0.064

9.5 4s+14d

177

2792

L 324x18 HF 2MG

2 0.064

8.4 4s+15d

170

2979

L 323x14 T5 LD HF SPA

2 0.064

9.2 4s+14d

177

2793

L 324x18 HF EP 2MG

1 0.031

4.7

32s

170

2980

L 324x14 T5 LD HF EP SPA

1 0.030

5.25

30s

177

2804

L 324x14 T5 LD HF VS

1 0.030

32s

179

2981

L 323x14 T5 LD HF EP SPA

1 0.030

5.1

30s

177

2805

L 324x14 T5 LD HF EP VS

1 0.030

7.5

32s

179

3084

3F Dodeca 220 AC 1x18 CD HF 2MG

1 0.019

1.25

90s

145

2825

L 353x55 C LD HF COM

2 0.061

10.2 4s+15d

187

3085

3F Dodeca 220 AC 1x26 CD HF 2MG

1 0.019

1.3

90s

145

2826

L 353x55 C LD HF EP COM

1 0.050

6.1

18s

187

3087

3F Dodeca 220 AC 2x18 CD HF 2MG

1 0.019

1.45

90s

145

2827

L 352x55 C LD HF RSP 54V

1 0.030

6.1

32s

187

3088

3F Dodeca 220 AC 2x26 CD HF 2MG

1 0.019

1.6

90s

145

2828

L 352x55 C LD HF EP RSP 54V

1 0.030

6.9

32s

187

3094

3F Dodeca 220 AC 1x18 CD HF EP 2MG

1 0.019

2.05

60s

145

2831

L 352x55 C LD HF RVS 54V

1 0.030

32s

188

3095

3F Dodeca 220 AC 1x26 CD HF EP 2MG

1 0.019

2.1

60s

145

2832

L 352x55 C LD HF EP RVS 54V

1 0.030

8.8

32s

188

3097

3F Dodeca 220 AC 2x18 CD HF EP 2MG

1 0.019

2.25

60s

145

2837

L 352x55 C LD HF RVSS

1 0.042

12.9

26s

188

3098

3F Dodeca 220 AC 2x26 CD HF EP 2MG

1 0.019

2.35

60s

145

2838

L 352x55 C LD HF EP RVSS

1 0.042

13.7

26s

188

3174

3F Dodeca 220 AC 1x26 CD HF 2MG VS

1 0.019

1.55

90s

146

2847

L 324x14 T5 LD HF SP

2 0.061

9.9 4s+14d

178

3176

3F Dodeca 220 AC 2x18 CD HF 2MG VS

1 0.019

1.7

90s

146

2848

L 323x14 T5 LD HF SP

2 0.061

9.6 4s+14d

178

3177

3F Dodeca 220 AC 2x26 CD HF 2MG VS

1 0.019

1.85

90s

146

2849

L 324x14 T5 LD HF EP SP

1 0.030

5.45

32s

178

3181

3F Dodeca 220 AC 1x26 CD HF EP 2MG VS

1 0.019

2.25

60s

146

2850

L 323x14 T5 LD HF EP SP

1 0.030

5.3

32s

178

3183

3F Dodeca 220 AC 2x18 CD HF EP 2MG VS

1 0.019

2.5

60s

146

2857

L 324x18 HF SP

2 0.064

9.5 4s+14d

178

3184

3F Dodeca 220 AC 2x26 CD HF EP 2MG VS

1 0.019

2.6

60s

146

2860

L 324x14 T5 LD HF 2M

2 0.061

8.8 4s+15d

167

3561

3F Dodeca 300 1x26 CD HF 2MG

1 0.022

2.3

60s

149

2861

L 323x14 T5 LD HF 2M

2 0.061

8.6 4s+15d

167

3562

3F Dodeca 300 1x32 CT HF 2MG

1 0.022

2.35

60s

149

2862

L 324x14 T5 LD HF EP 2M

1 0.030

4.9

32s

167

3563

3F Dodeca 300 1x42 CT HF 2MG

1 0.022

2.4

60s

149

2863

L 323x14 T5 LD HF EP 2M

1 0.030

4.8

32s

167

3566

3F Dodeca 300 2x26 CD HF 2MG

1 0.022

2.55

60s

149

2864

L 324x14 T5 LD HF DA 2M

2 0.061

9.2 4s+15d

167

3567

3F Dodeca 300 2x32 CT HF 2MG

1 0.022

2.65

60s

149

2865

L 324x14 T5 LD HF DA EP 2M

1 0.030

5.1

32s

167

3568

3F Dodeca 300 2x42 CT HF 2MG

1 0.022

2.75

60s

149

2870

L 324x18 LD HF 2M

2 0.064

9.1 4s+15d

168

3570

3F Dodeca 300 1x26 CD HF EP 2MG

1 0.026

3.2

45s

149

2871

L 324x18 LD HF EP 2M

1 0.031

5.05

32s

168

3571

3F Dodeca 300 1x32 CT HF EP 2MG

1 0.026

3.25

45s

149

2872

L 324x14 T5 LD HF 2US

2 0.061

8.8 4s+15d

171

3572

3F Dodeca 300 1x42 CT HF EP 2MG

1 0.026

3.35

45s

149

2873

L 323x14 T5 LD HF 2US

2 0.061

8.6 4s+15d

171

3575

3F Dodeca 300 2x26 CD HF EP 2MG

1 0.026

3.3

45s

149

2874

L 324x14 T5 LD HF EP 2US

1 0.030

4.9

32s

171

3576

3F Dodeca 300 2x32 CT HF EP 2MG

1 0.026

3.4

45s

149

2875

L 323x14 T5 LD HF EP 2US

1 0.030

4.8

32s

171

3577

3F Dodeca 300 2x42 CT HF EP 2MG

1 0.026

3.7

45s

149

2876

L 324x14 T5 LD HF DA 2US

2 0.061

9.2 4s+15d

171

3606

3F Dodeca 300 1x26 CD HF 2S

1 0.022

2.3

60s

150

2877

L 324x14 T5 LD HF DA EP 2US

1 0.030

5.1

32s

171

3607

3F Dodeca 300 1x32 CT HF 2S

1 0.022

2.35

60s

150

2882

L 324x18 LD HF 2US

2 0.064

9.1 4s+15d

172

3608

3F Dodeca 300 1x42 CT HF 2S

1 0.022

2.4

60s

150

2883

L 324x18 LD HF EP 2US

1 0.031

5.05

32s

172

3611

3F Dodeca 300 2x26 CD HF 2S

1 0.022

2.55

60s

150

2884

L 324x14 T5 LD HF 3AO

2 0.061

8.8 4s+15d

175

3612

3F Dodeca 300 2x32 CT HF 2S

1 0.022

2.65

60s

150

2885

L 323x14 T5 LD HF 3AO

2 0.061

8.6 4s+15d

175

3613

3F Dodeca 300 2x42 CT HF 2S

1 0.022

2.75

60s

150

2886

L 324x14 T5 LD HF EP 3AO

1 0.030

4.9

32s

175

3615

3F Dodeca 300 1x26 CD HF EP 2S

1 0.026

3.2

45s

150

2887

L 323x14 T5 LD HF EP 3AO

1 0.030

4.8

32s

175

3616

3F Dodeca 300 1x32 CT HF EP 2S

1 0.026

3.25

45s

150

2888

L 324x14 T5 LD HF DA 3AO

2 0.061

9.2 4s+15d

175

3617

3F Dodeca 300 1x42 CT HF EP 2S

1 0.026

3.35

45s

150

2889

L 324x14 T5 LD HF DA EP 3AO

1 0.030

5.1

32s

175

3620

3F Dodeca 300 2x26 CD HF EP 2S

1 0.026

3.3

45s

150

2894

L 324x18 LD HF 3AO

2 0.064

9.1 4s+15d

176

3621

3F Dodeca 300 2x32 CT HF EP 2S

1 0.026

3.4

45s

150

2895

L 324x18 LD HF EP 3AO

1 0.031

5.05

32s

176

3622

3F Dodeca 300 2x42 CT HF EP 2S

1 0.026

3.7

45s

150

2914

L 324x14 T5 LD HF 2MG

2 0.061

8.8 4s+15d

169

3656

3F Dodeca 300 1x42 CT HF 2MG VS

1 0.022

2.75

60s

151

2915

L 323x14 T5 LD HF 2MG

2 0.061

8.6 4s+15d

169

3658

3F Dodeca 300 1x42 CT HF EP 2MG VS

1 0.026

3.7

45s

151

2916

L 324x14 T5 LD HF EP 2MG

1 0.030

4.9

32s

169

3768

3F Dodeca 220 1x42 CT HF 2MG VS

1 0.019

1.85

90s

142

2917

L 323x14 T5 LD HF EP 2MG

1 0.030

4.8

32s

169

3770

3F Dodeca 220 1x42 CT HF EP 2MG VS

1 0.019

2.65

60s

142

2918

L 324x14 T5 LD HF DA 2MG

2 0.061

9.2 4s+15d

169

3897

3F Dodeca 220 1x18 CD HF 2MG

1 0.019

1.45

90s

141

2919

L 324x14 T5 LD HF DA EP 2MG

1 0.030

5.1

169

3898

3F Dodeca 220 1x26 CD HF 2MG

1 0.019

1.5

90s

141

32s

477

Analytical guide Packing Code

Packing

Item

Pallets Pcs

Page

Code

m³

1 0.019

1.65

90s

141

5220

Item Pcs

Pallets

Page

1.42

180s

324

m³

3F Linda Inox 1x18 HF

1 0.008

3900

3F Dodeca 220 2x18 CD HF 2MG

3901

3F Dodeca 220 2x26 CD HF 2MG

1 0.019

1.8

90s

141

5221

3F Linda Inox 1x36 HF

1 0.016

2.32

90s

324

3905

3F Dodeca 220 1x42 CT HF 2MG

1 0.019

1.6

90s

141

5222

3F Linda Inox 1x58 HF

1 0.020

2.82

90s

324

3907

3F Dodeca 220 1x18 CD HF EP 2MG

1 0.019

2.25

60s

141

5223

3F Linda Inox 2x18 HF

1 0.013

1.92

112s

324

3908

3F Dodeca 220 1x26 CD HF EP 2MG

1 0.019

2.3

60s

141

5224

3F Linda Inox 2x36 HF

1 0.024

3.1

56s

324

3910

3F Dodeca 220 2x18 CD HF EP 2MG

1 0.019

2.45

60s

141

5225

3F Linda Inox 2x58 HF

1 0.030

3.78

56s

324

3911

3F Dodeca 220 2x26 CD HF EP 2MG

1 0.019

2.55

60s

141

5230

3F Linda Industria 1x58 ENP

1 0.030

4.68

56s

329

3915

3F Dodeca 220 1x42 CT HF EP 2MG

1 0.019

2.4

60s

141

5231

3F Linda Industria 1x58 EP

1 0.030

5.64

56s

328

3938

3F Dodeca 220 1x18 CD HF 2S

1 0.019

1.45

90s

142

5235

3F Linda 1x18 ENP

1 0.013

1.98

112s

329

3940

3F Dodeca 220 1x26 CD HF 2S

1 0.019

1.5

90s

142

5236

3F Linda 1x18 EP

1 0.013

2.59

112s

328

3942

3F Dodeca 220 1x42 CT HF 2S

1 0.019

1.6

90s

142

5237

3F Linda 1x36 ENP

1 0.016

2.55

90s

329

3944

3F Dodeca 220 2x18 CD HF 2S

1 0.019

1.65

90s

142

5238

3F Linda 1x36 EP

1 0.016

3.15

90s

328

3945

3F Dodeca 220 2x26 CD HF 2S

1 0.019

1.8

90s

142

5239

3F Linda 1x58 EP

1 0.020

4.1

90s

328

3948

3F Dodeca 220 1x18 CD HF EP 2S

1 0.019

2.25

60s

142

5240

3F Linda 2x18 EP

1 0.013

2.64

112s

328

3950

3F Dodeca 220 1x26 CD HF EP 2S

1 0.019

2.3

60s

142

5241

3F Linda 2x36 EP

1 0.024

4.38

56s

328

3952

3F Dodeca 220 1x42 CT HF EP 2S

1 0.019

2.4

60s

142

5242

3F Linda 2x58 EP

1 0.030

5.8

56s

328

3954

3F Dodeca 220 2x18 CD HF EP 2S

1 0.019

2.45

60s

142

5245

3F Linda Inox 1x18 ENP

1 0.013

112s

329

3955

3F Dodeca 220 2x26 CD HF EP 2S

1 0.019

2.55

60s

142

5246

3F Linda Inox 1x18 AR EP

1 0.013

2.48

112s

328

4105

Fil 180 1x36 HF RFMG

1 0.021

4.5

60s

5247

3F Linda Inox 1x36 AR EP

1 0.016

3.34

90s

328

4106

Fil 180 1x58 HF RFMG

1 0.026

5.1

60s

5248

3F Linda Inox 1x58 AR EP

1 0.020

4.56

90s

328

4175

Fil 220 2x36 HF RFMG

1 0.026

4.8

48s

5249

3F Linda Inox 2x18 AR EP

1 0.013

2.89

112s

328

4176

Fil 220 2x58 HF RFMG

1 0.031

5.6

48s

5250

3F Linda Inox 2x36 AR EP

1 0.024

4.83

56s

328

4300

Fil 180 1x54 T5 HF RFMG

1 0.021

4.25

60s

5251

3F Linda Inox 2x58 AR EP

1 0.030

6.67

56s

328

4301

Fil 180 1x49 T5 HF RFMG

1 0.026

4.95

60s

5252

3F Linda Inox 1x36 HF EP

1 0.016

2.96

90s

328

4302

Fil 180 1x80 T5 HF RFMG

1 0.026

4.95

60s

5253

3F Linda Inox 1x58 HF EP

1 0.020

3.82

90s

328

4303

Fil 180 1+1x54 T5 HF RFMG

1 0.041

8.5

60s

5254

3F Linda Inox 2x18 HF EP

1 0.013

2.5

112s

328

4304

Fil 180 1+1x49 T5 HF RFMG

1 0.051

9.2

60s

5255

3F Linda Inox 2x36 HF EP

1 0.024

3.3

56s

328

4305

Fil 180 1+1x80 T5 HF RFMG

1 0.051

9.2

60s

5256

3F Linda Inox 2x58 HF EP

1 0.030

4.55

56s

328

4318

Fil 220 2x54 T5 HF RFMG

1 0.026

4.7

48s

5257

3F Linda 1x11C ENP

1 0.006

1.28

192s

329

4319

Fil 220 2x49 T5 HF RFMG

1 0.031

5.45

48s

5259

3F Linda 1+1x11C ENP

1 0.006

1.85

192s

329

4320

Fil 220 2x80 T5 HF RFMG

1 0.031

5.45

48s

5260

3F Linda 1x11C

1 0.004

288s

326

4350

Fil 220 2x36 HF SP

1 0.026

5.3

48s

5261

3F Linda 1x11C LA

1 0.006

1.21

192s

326

4351

Fil 220 2x58 HF SP

1 0.031

6.4

48s

5262

3F Linda 2x11C

1 0.006

1.63

192s

326

4354

Fil 220 2x36 HF EP SP

1 0.026

6.3

48s

5265

3F Linda Inox 1x18 HF EP

1 0.013

1.95

112s

328

4355

Fil 220 2x58 HF EP SP

1 0.031

7.4

48s

5267

3F Linda Inox 1x11C HF LA EP

1 0.006

1.5

192s

328

4702

3F Quadro LED 100W DA CR SP IP43

1 0.084

12.3

12s

113

5268

3F Linda Inox 2x11C HF EP

1 0.006

1.7

192s

328

4952

L 350 R90 4x40 C LD HF DA

2 0.074

10.3 2s+15d

191

5275

3F Linda Inox 1x11C HF

1 0.004

288s

326

4953

L 350 R90 4x55 C LD HF DA

2 0.074

10.3 2s+15d

191

5276

3F Linda Inox 1x11C HF LA

1 0.006

1.1

192s

326

4972

L 350 R90 4x55 C LD HF DA CONC

2 0.074

10.3 2s+15d

191

5277

3F Linda Inox 2x11C HF

1 0.006

1.3

192s

326

5200

3F Linda 1x18

1 0.008

1.72

180s

323

5350

3F Linda Trasparente 1x18 HF

1 0.008

1.42

180s

331

5201

3F Linda 1x36

1 0.016

2.6

90s

323

5351

3F Linda Trasparente 1x36 HF

1 0.016

2.32

90s

331

5202

3F Linda 1x58

1 0.020

3.39

90s

323

5352

3F Linda Trasparente 1x58 HF

1 0.020

2.82

90s

331

5203

3F Linda 2x18

1 0.013

2.17

112s

323

5354

3F Linda Trasparente 2x36 HF

1 0.024

3.1

56s

331

5204

3F Linda 2x36

1 0.024

3.86

56s

323

5355

3F Linda Trasparente 2x58 HF

1 0.030

3.63

56s

331

5205

3F Linda 2x58

1 0.030

5.16

56s

323

5356

3F Linda Trasparente 1x11 C

1 0.004

288s

332

5206

3F Linda 1x18 LA

1 0.013

112s

323

5357

3F Linda Trasparente 2x11 C

1 0.006

1.63

192s

332

5207

3F Linda 1x36 LA

1 0.024

2.9

56s

323

5358

3F Linda Trasparente 1x11C HF LA

1 0.006

1.1

192s

332

5208

3F Linda 1x58 LA

1 0.030

3.91

56s

323

5359

3F Linda Trasparente 1x11C HF

1 0.004

288s

332

5210

3F Linda Inox 1x18 AR

1 0.008

1.94

180s

323

5360

3F Linda Trasparente 2x11C HF

1 0.006

1.3

192s

332

5211

3F Linda Inox 1x36 AR

1 0.016

2.84

90s

323

5361

3F Linda Trasparente 1x14 T5 HF

1 0.008

1.4

180s

331

5212

3F Linda Inox 1x58 AR

1 0.020

3.84

90s

323

5363

3F Linda Trasparente 1x28 T5 HF

1 0.016

2.3

90s

331

5213

3F Linda Inox 2x18 AR

1 0.013

2.42

112s

323

5365

3F Linda Trasparente 1x49 T5 HF

1 0.020

2.8

90s

331

5214

3F Linda Inox 2x36 AR

1 0.024

4.35

56s

323

5374

3F Linda Trasparente 2x28 T5 HF

1 0.024

3.1

56s

331

5215

3F Linda Inox 2x58 AR

1 0.030

5.94

56s

323

5376

3F Linda Trasparente 2x49 T5 HF

1 0.030

3.6

56s

331

478

Analytical guide Packing Code

Packing

Item

Pallets Pcs

m³

Page

Code

Item Pcs

m³

Pallets

Page

5391

3F Linda Trasparente 2x35 T5 LD HF UGR19

1 0.030

56s

332

5869

A3F 912x18 HF

1 0.017

4.5

80s

363

5406

i3F 751x36 HF AMPIO

1 0.042

5.45

31s

355

5872

A3F 911x58 HF CONC

1 0.039

9.1

42s

363

5407

i3F 751x58 HF AMPIO

1 0.052

7.3

31s

355

5873

A3F 912x58 HF CONC

1 0.039

9.2

42s

363

5408

i3F 752x36 HF AMPIO

1 0.042

6.2

31s

355

5884

A3F 912x36 HF EP AMPIO

1 0.031

8.75

80s

363

5409

i3F 752x58 HF AMPIO

1 0.052

7.5

31s

355

5885

A3F 912x58 HF EP AMPIO

1 0.039

10.83

80s

363

5426

i3F 761x36 HF AMPIO

1 0.031

8.34

42s

357

5893

A3F 921x18 HF

1 0.017

3.35

80s

367

5427

i3F 761x58 HF AMPIO

1 0.039

10.13

42s

357

5894

A3F 922x18 HF

1 0.017

3.55

80s

367

5428

i3F 762x36 HF AMPIO

1 0.031

8.45

42s

357

5897

A3F 921x36 HF AMPIO

1 0.031

5.6

42s

367

5429

i3F 762x58 HF AMPIO

1 0.039

10.47

42s

357

5898

A3F 921x58 HF AMPIO

1 0.039

6.6

42s

367

5446

A3F 901x36 HF AMPIO

1 0.031

5.15

42s

361

5899

A3F 922x36 HF AMPIO

1 0.031

5.7

42s

367

5447

A3F 901x58 HF AMPIO

1 0.039

6.35

42s

361

5900

A3F 922x58 HF AMPIO

1 0.039

6.7

42s

367

5448

A3F 902x36 HF AMPIO

1 0.031

5.66

42s

361

5902

A3F 922x36 HF EP AMPIO

1 0.031

6.1

42s

367

5449

A3F 902x58 HF AMPIO

1 0.039

6.85

42s

361

5903

A3F 922x58 HF EP AMPIO

1 0.039

7.5

42s

367

5466

A3F 911x36 HF AMPIO

1 0.031

7.64

42s

363

5975

A3F 921x58 HF CONC

1 0.039

6.6

42s

367

5467

A3F 911x58 HF AMPIO

1 0.039

9.53

42s

363

5976

A3F 922x58 HF CONC

1 0.039

6.7

42s

367

5468

A3F 912x36 HF AMPIO

1 0.031

8.15

42s

363

8330

3F FS PC LED 1x4W-350 AM II

2 0.061

7.6

36s

395

5469

A3F 912x58 HF AMPIO

1 0.039

10.23

42s

363

8357

3F 66 1 LED 6 II

2 0.015

75s

393

5700

3F Linda Inox 1x14 T5 HF

1 0.008

1.47

180s

325

8358

3F 66 2 LED 12 II

2 0.015

6.6

75s

393

5702

3F Linda Inox 1x28 T5 HF

1 0.016

2.42

90s

325

8366

3F Metro 1 LED 8 AMPIO II

2 0.095

12s

397

5704

3F Linda Inox 1x35 T5 HF

1 0.020

2.97

90s

325

9146

LUCECURA 1x35-49-80 Ind + 1x14-24 DX Dir T5 HF

1 0.074

407

5705

3F Linda Inox 1x49 T5 HF

1 0.020

2.97

90s

325

9147

LUCECURA 1x35-49-80 Ind + 1x14-24 SX Dir T5 HF

1 0.074

407

5706

3F Linda Inox 1x80 T5 HF

1 0.020

2.97

90s

325

9150

LUCECURA 2x35-49-80 Ind + 1x14-24 DX Dir T5 HF

1 0.074

407

5707

3F Linda Inox 2x14 T5 HF

1 0.013

2.02

112s

325

9151

LUCECURA 2x35-49-80 Ind + 1x14-24 SX Dir T5 HF

1 0.074

407

5709

3F Linda Inox 2x28 T5 HF

1 0.024

3.3

56s

325

9154

LUCECURA 3x35-49-80 Ind + 1x14-24 DX Dir T5 HF

1 0.074

407

5711

3F Linda Inox 2x35 T5 HF

1 0.030

4.08

56s

325

9155

LUCECURA 3x35-49-80 Ind + 1x14-24 SX Dir T5 HF

1 0.074

5712

3F Linda Inox 2x49 T5 HF

1 0.030

4.08

56s

325

9210

3F Relax 1000 1x39 Ind + 1x39 Dir T5 LD HF

1 0.020

405

5720

3F Linda Inox 1x80 T5 HF LA CONC

1 0.030

3.7

56s

325

9238

3F Relax 1500 1x49 Ind + 1+1x14W Dir T5 LD HF

1 0.042

405

5741

3F Linda Inox 1x49 T5 HF EP

1 0.020

3.95

90s

328

9239

3F Relax 1800 1x49 Ind + 1+1x14W Dir T5 LD HF

1 0.029

405

5749

3F Linda Inox 2x49 T5 HF EP

1 0.030

4.68

56s

328

10025

P 201x18 HF 2M

1 0.009

2.75

120s

103

5764

3F Linda Inox 1x80 T5 HF LA EP CONC

1 0.030

5.1

56s

328

10026

P 201x36 HF 2M

1 0.018

60s

103

5768

3F Linda Inox 1x28-54 T5 HF

1 0.016

2.32

90s

325

10027

P 201x58 HF 2M

1 0.024

4.75

60s

103

5769

3F Linda Inox 1x35-49-80 T5 HF

1 0.020

2.82

90s

325

10028

P 202x18 HF ST 2M

1 0.012

3.2

96s

103

5772

3F Linda Inox 2x35-49 T5 HF

1 0.030

3.78

56s

325

10029

P 202x36 HF ST 2M

1 0.023

4.4

48s

103

5790

3F Linda Compatta LED 1x5W 100x300

1 0.004

192s

308

10030

P 202x58 HF ST 2M

1 0.030

5.6

48s

103

5791

3F Linda Compatta LED 1x5W 160x300

1 0.006

192s

308

10031

P 202x36 HF 2M

1 0.031

5.7

33s

103

5796

i3F 751x18 HF

1 0.017

3.3

80s

355

10032

P 202x58 HF 2M

1 0.041

6.54

33s

103

5797

i3F 752x18 HF

1 0.017

3.5

80s

355

10033

P 203x18 HF 2M

1 0.037

6.2

30s

103

5808

i3F 751x58 HF CONC

1 0.042

7.2

31s

355

10034

P 204x18 HF 2M

1 0.037

5.48

30s

103

5809

i3F 752x58 HF CONC

1 0.052

7.3

31s

355

10085

P 201x18 HF 2US

1 0.009

2.75

120s

105

5811

i3F 752x36 HF EP AMPIO

1 0.042

6.8

31s

355

10086

P 201x36 HF 2US

1 0.018

60s

105

5812

i3F 752x58 HF EP AMPIO

1 0.052

8.1

31s

355

10087

P 201x58 HF 2US

1 0.024

4.75

60s

105

5817

i3F 761x18 HF

1 0.017

4.6

80s

357

10088

P 202x18 HF ST 2US

1 0.012

3.2

96s

105

5818

i3F 762x18 HF

1 0.017

4.9

80s

357

10089

P 202x36 HF ST 2US

1 0.023

4.4

48s

105

5821

i3F 761x58 HF CONC

1 0.039

10.1

42s

357

10090

P 202x58 HF ST 2US

1 0.030

5.6

48s

105

5822

i3F 762x58 HF CONC

1 0.039

10.5

42s

357

10091

P 202x36 HF 2US

1 0.031

5.7

33s

105

5844

i3F 762x36 HF EP AMPIO

1 0.031

9.05

42s

357

10092

P 202x58 HF 2US

1 0.041

6.54

33s

105

5845

i3F 762x58 HF EP AMPIO

1 0.039

42s

357

10093

P 203x18 HF 2US

1 0.037

6.2

30s

105

5847

A3F 901x18 HF

1 0.017

80s

361

10094

P 204x18 HF 2US

1 0.037

5.48

30s

105

5848

A3F 902x18 HF

1 0.017

3.25

80s

361

10265

P 201x18 HF 2MG

1 0.009

2.75

120s

104

5859

A3F 901x58 HF CONC

1 0.039

5.7

42s

361

10266

P 201x36 HF 2MG

1 0.018

60s

104

5860

A3F 902x58 HF CONC

1 0.039

5.8

42s

361

10267

P 201x58 HF 2MG

1 0.024

4.75

60s

104

5866

A3F 902x36 HF EP AMPIO

1 0.031

6.3

42s

361

10268

P 202x18 HF ST 2MG

1 0.012

3.2

96s

104

5867

A3F 902x58 HF EP AMPIO

1 0.039

7.45

42s

361

10269

P 202x36 HF ST 2MG

1 0.023

4.4

48s

104

5868

A3F 911x18 HF

1 0.017

4.3

80s

363

10270

P 202x58 HF ST 2MG

1 0.030

5.6

48s

104

407

479

Analytical guide Packing Code

Packing

Item

Pallets Pcs

m³

Page

Code

Item Pcs

Pallets

Page

4.25

60s

m³

1 0.021

10271

P 202x36 HF 2MG

1 0.031

5.7

33s

104

11066

Fil 180 1x28 T5 HF 2MG

10272

P 202x58 HF 2MG

1 0.041

6.54

33s

104

11067

Fil 180 1x35 T5 HF 2MG

1 0.026

5.05

60s

10273

P 203x18 HF 2MG

1 0.037

6.2

30s

104

11068

Fil 180 1+1x28 T5 HF 2MG

1 0.041

7.5

60s

10274

P 204x18 HF 2MG

1 0.037

5.48

30s

104

11069

Fil 180 1+1x35 T5 HF 2MG

1 0.051

9.3

60s

10546

P 202x28-54 T5 HF RVS IP54

1 0.031

8.65

33s

107

11071

Fil 180 2x28 T5 HF 2MG

1 0.021

4.4

60s

10548

P 204x14-24 T5 HF DA RVS IP54

1 0.037

9.6

30s

107

11072

Fil 180 2x35 T5 HF 2MG

1 0.026

5.2

60s

10572

P 202x28-54 T5 HF RSP IP54

1 0.031

33s

107

11073

Fil 180 2+2x28 T5 HF 2MG

1 0.041

8.1

60s

10574

P 204x14-24 T5 HF DA RSP IP54

1 0.037

7.76

30s

107

11074

Fil 180 2+2x35 T5 HF 2MG

1 0.051

9.9

60s

10704

3F Travetta LED 1x22W 2MG L1590

1 0.022

4.8

75s

11106

Fil 180 1x36 HF 2MG

1 0.021

4.6

60s

10707

3F Travetta LED 2x22W 2MG L1590

1 0.022

75s

11107

Fil 180 1x58 HF 2MG

1 0.026

5.2

60s

10718

3F Travetta LED 1x22W SP L1590

1 0.022

4.8

75s

11126

Fil 180 1x28 T5 HF 2US

1 0.021

4.25

60s

10721

3F Travetta LED 2x22W SP L1590

1 0.022

75s

11127

Fil 180 1x35 T5 HF 2US

1 0.026

5.05

60s

10732

3F Travetta LED 1x22W OP L1590

1 0.022

4.8

75s

11128

Fil 180 1+1x28 T5 HF 2US

1 0.041

7.5

60s

10735

3F Travetta LED 2x22W OP L1590

1 0.022

75s

11129

Fil 180 1+1x35 T5 HF 2US

1 0.051

9.3

60s

10747

3F Travetta LED DI 2x15W 2MG L1590

1 0.022

5.2

75s

11131

Fil 180 2x28 T5 HF 2US

1 0.021

4.4

60s

10748

3F Travetta LED DI 2x22W 2MG L1590

1 0.022

5.2

75s

11132

Fil 180 2x35 T5 HF 2US

1 0.026

5.2

60s

10763

3F Travetta LED 2x22W DALI HCL 2MG L1590

1 0.022

6.5

75s

11133

Fil 180 2+2x28 T5 HF 2US

1 0.041

8.1

60s

10771

3F Travetta LED 1x40W SP L2200

1 0.030

75s

11134

Fil 180 2+2x35 T5 HF 2US

1 0.051

9.9

60s

10773

3F Travetta LED 2x40W SP L2200

1 0.030

7.5

75s

11136

Fil 180 1x28 T5 HF EP 2US

1 0.021

4.95

60s

10775

3F Travetta LED 1x40W OP L2200

1 0.030

75s

11137

Fil 180 1x35 T5 HF EP 2US

1 0.026

6.05

60s

10777

3F Travetta LED 2x40W OP L2200

1 0.030

7.5

75s

11141

Fil 180 2x28 T5 HF EP 2US

1 0.021

5.1

60s

10870

3F Zeta D 1x22 LED L1489

1 0.019

168s

11142

Fil 180 2x35 T5 HF EP 2US

1 0.026

6.2

60s

10871

3F Zeta D 1x18 LED L1194

1 0.019

3.5

168s

11166

Fil 180 1x36 HF 2US

1 0.021

4.6

60s

10872

3F Zeta D 1x9 LED L605

1 0.019

2.8

168s

11167

Fil 180 1x58 HF 2US

1 0.026

5.2

60s

10873

3F Zeta D 2x22 LED L1489

1 0.019

4.2

168s

11171

Fil 180 1x36 HF EP 2US

1 0.021

5.25

60s

10874

3F Zeta D 2x18 LED L1194

1 0.019

3.7

168s

11172

Fil 180 1x58 HF EP 2US

1 0.026

5.9

60s

10875

3F Zeta D 2x9 LED L605

1 0.019

168s

11306

Fil 180 1x28 T5 HF 3AO

1 0.021

4.25

60s

10877

3F Zeta DR 1x22 LED L1489

1 0.019

168s

11307

Fil 180 1x35 T5 HF 3AO

1 0.026

5.05

60s

10878

3F Zeta DR 1x18 LED L1194

1 0.019

3.5

168s

11308

Fil 180 1+1x28 T5 HF 3AO

1 0.041

7.5

60s

10879

3F Zeta DR 1x9 LED L605

1 0.019

2.8

168s

11309

Fil 180 1+1x35 T5 HF 3AO

1 0.051

9.3

60s

10880

3F Zeta DR 2x22 LED L1489

1 0.019

4.2

168s

11311

Fil 180 2x28 T5 HF 3AO

1 0.021

4.4

60s

10881

3F Zeta DR 2x18 LED L1194

1 0.019

3.7

168s

11312

Fil 180 2x35 T5 HF 3AO

1 0.026

5.2

60s

10882

3F Zeta DR 2x9 LED L605

1 0.019

168s

11313

Fil 180 2+2x28 T5 HF 3AO

1 0.041

8.1

60s

10886

3F Zeta DR AS 1x30 LED L1489

1 0.019

4.5

168s

11314

Fil 180 2+2x35 T5 HF 3AO

1 0.051

9.9

60s

10887

3F Zeta DR AS 2x22 LED L1489

1 0.019

4.7

168s

11316

Fil 180 1x28 T5 HF EP 3AO

1 0.021

4.95

60s

10892

3F Zeta L 40 LED L1489

1 0.019

168s

11317

Fil 180 1x35 T5 HF EP 3AO

1 0.026

6.05

60s

10893

3F Zeta L 30 LED L1194

1 0.019

3.5

168s

11321

Fil 180 2x28 T5 HF EP 3AO

1 0.021

5.1

60s

10894

3F Zeta L 15 LED L605

1 0.019

2.8

168s

11322

Fil 180 2x35 T5 HF EP 3AO

1 0.026

6.2

60s

11006

Fil 180 1x28 T5 HF 2M

1 0.021

4.25

60s

11346

Fil 180 1x36 HF 3AO

1 0.021

4.6

60s

11007

Fil 180 1x35 T5 HF 2M

1 0.026

5.05

60s

11347

Fil 180 1x58 HF 3AO

1 0.026

5.2

60s

11008

Fil 180 1+1x28 T5 HF 2M

1 0.041

7.5

60s

11351

Fil 180 1x36 HF EP 3AO

1 0.021

5.25

60s

11009

Fil 180 1+1x35 T5 HF 2M

1 0.051

9.3

60s

11352

Fil 180 1x58 HF EP 3AO

1 0.026

5.9

60s

11011

Fil 180 2x28 T5 HF 2M

1 0.021

4.4

60s

11726

Fil 220 2x28 T5 HF 2M

1 0.026

4.8

48s

11012

Fil 180 2x35 T5 HF 2M

1 0.026

5.2

60s

11727

Fil 220 2x35 T5 HF 2M

1 0.031

5.55

48s

11013

Fil 180 2+2x28 T5 HF 2M

1 0.041

8.1

60s

11731

Fil 220 2x28 T5 HF EP 2M

1 0.026

5.55

48s

11014

Fil 180 2+2x35 T5 HF 2M

1 0.051

9.9

60s

11732

Fil 220 2x35 T5 HF EP 2M

1 0.031

6.55

48s

11016

Fil 180 1x28 T5 HF EP 2M

1 0.021

4.95

60s

11756

Fil 220 2x36 HF 2M

1 0.026

4.9

48s

11017

Fil 180 1x35 T5 HF EP 2M

1 0.026

6.05

60s

11757

Fil 220 2x58 HF 2M

1 0.031

5.7

48s

11021

Fil 180 2x28 T5 HF EP 2M

1 0.021

5.1

60s

11761

Fil 220 2x36 HF EP 2M

1 0.026

5.55

48s

11022

Fil 180 2x35 T5 HF EP 2M

1 0.026

6.2

60s

11762

Fil 220 2x58 HF EP 2M

1 0.031

6.4

48s

11046

Fil 180 1x36 HF 2M

1 0.021

4.6

60s

11826

Fil 220 2x28 T5 HF 2US

1 0.026

4.8

48s

11047

Fil 180 1x58 HF 2M

1 0.026

5.2

60s

11827

Fil 220 2x35 T5 HF 2US

1 0.031

5.55

48s

11051

Fil 180 1x36 HF EP 2M

1 0.021

5.25

60s

11831

Fil 220 2x28 T5 HF EP 2US

1 0.026

5.55

48s

11052

Fil 180 1x58 HF EP 2M

1 0.026

5.9

60s

11832

Fil 220 2x35 T5 HF EP 2US

1 0.031

6.55

48s

480

Analytical guide Packing Code

Packing

Item

Pallets Pcs

m³

Kg 4.9

11856

Fil 220 2x36 HF 2US

1 0.026

11857

Fil 220 2x58 HF 2US

1 0.031

11861

Fil 220 2x36 HF EP 2US

1 0.026

11862

Fil 220 2x58 HF EP 2US

1 0.031

11976

Fil 220 2x28 T5 HF 3AO

11977

Page

Code

Item Pcs

m³

Pallets

Page

48s

13004

3F Travetta GR DI 1x54 T5 LD HF 2MG

1 0.018

3.9

75s

5.7

48s

13005

3F Travetta GR DI 1x49 T5 LD HF 2MG

1 0.022

4.7

75s

5.55

48s

13008

3F Travetta GR DI 2x28 T5 LD HF 2MG

1 0.018

4.1

75s

6.4

48s

13009

3F Travetta GR DI 2x35 T5 LD HF 2MG

1 0.022

4.95

75s

1 0.026

4.8

48s

13077

3F Travetta GR DI 1x28-54 T5 HF 2MG AMPIA

1 0.018

3.9

75s

Fil 220 2x35 T5 HF 3AO

1 0.031

5.55

48s

13078

3F Travetta GR DI 1x35-49-80T5 HF 2MG AM

1 0.022

4.7

75s

11981

Fil 220 2x28 T5 HF EP 3AO

1 0.026

5.55

48s

13080

3F Travetta GR DI 2x28-54 T5 HF 2MG AMPIA

1 0.018

3.9

75s

11982

Fil 220 2x35 T5 HF EP 3AO

1 0.031

6.55

48s

13081

3F Travetta GR DI 2x35-49 T5 HF 2MG AMPIA

1 0.022

4.7

75s

12006

Fil 220 2x36 HF 3AO

1 0.026

4.9

48s

13085

3F Travetta GR 1x14 T5 LD HF 2MG

1 0.010

2.3

150s

12007

Fil 220 2x58 HF 3AO

1 0.031

5.7

48s

13087

3F Travetta GR 1x35 T5 LD HF 2MG

1 0.022

5.2

75s

12011

Fil 220 2x36 HF EP 3AO

1 0.026

5.55

48s

13088

3F Travetta GR 1x24 T5 LD HF 2MG

1 0.010

2.3

150s

12012

Fil 220 2x58 HF EP 3AO

1 0.031

6.4

48s

13089

3F Travetta GR 1x54 T5 LD HF 2MG

1 0.018

4.3

75s

12120

Fly2 LED B 2x24W DALI SP L1316

1 0.032

6.5

43s

13090

3F Travetta GR 1x49 T5 LD HF 2MG

1 0.022

5.2

75s

12403

Fil 180 LED 2x24W RSP AMPIO L1280

1 0.021

60s

13091

3F Travetta GR 1x80 T5 LD HF 2MG

1 0.022

5.2

75s

12404

Fil 180 LED 2x30W RSP AMPIO L1590

1 0.026

6.2

60s

13092

3F Travetta GR 2x14 T5 LD HF 2MG

1 0.010

2.5

150s

12491

03F LED 1x9W L640

1 0.006

1.5

180s

109

13093

3F Travetta GR 2x28 T5 LD HF 2MG

1 0.018

4.5

75s

12493

03F LED 1x18W L1250

1 0.012

90s

109

13094

3F Travetta GR 2x35 T5 LD HF 2MG

1 0.022

5.45

75s

12495

03F LED 1x22W L1550

1 0.014

4.5

90s

109

13095

3F Travetta GR 2x24 T5 LD HF 2MG

1 0.010

2.5

150s

12501

03F LED 2x9W L640

1 0.012

2.2

120s

109

13162

3F Travetta GR 1x28-54 T5 HF 2MG AMPIA

1 0.018

4.3

75s

12503

03F LED 2x18W L1250

1 0.023

60s

109

13163

3F Travetta GR 1x35-49-80 T5 HF 2MG AMPIA

1 0.022

5.15

75s

12505

03F LED 2x22W L1550

1 0.028

5.8

60s

109

13165

3F Travetta GR 2x28-54 T5 HF 2MG AMPIA

1 0.018

4.3

75s

12507

03F LED 4x6W 350x350

1 0.011

108s

109

13166

3F Travetta GR 2x35-49 T5 HF 2MG AMPIA

1 0.022

5.15

75s

12508

03F LED 4x9W 640x640

1 0.034

3.8

35s

109

13172

3F Travetta DI 1x35 T5 LD HF 2MG

1 0.022

4.7

75s

12601

Fil 180 LED 1x24W 2US L1280

1 0.021

4.5

60s

13174

3F Travetta DI 1x54 T5 LD HF 2MG

1 0.018

3.9

75s

12603

Fil 180 LED 1x30W 2US L1590

1 0.026

5.7

60s

13175

3F Travetta DI 1x49 T5 LD HF 2MG

1 0.022

4.7

75s

12605

Fil 180 LED 2x24W 2US L1280

1 0.021

4.7

60s

13178

3F Travetta DI 2x28 T5 LD HF 2MG

1 0.018

4.1

75s

12607

Fil 180 LED 2x30W 2US L1590

1 0.026

5.9

60s

13179

3F Travetta DI 2x35 T5 LD HF 2MG

1 0.022

4.95

75s

12614

Fil 180 LED 1+1x30W 2US L3140

1 0.051

11.4

60s

13255

3F Travetta 1x14 T5 LD HF 2MG

1 0.010

2.3

150s

12618

Fil 180 LED 2+2x30W 2US L3140

1 0.051

11.8

60s

13257

3F Travetta 1x35 T5 LD HF 2MG

1 0.022

5.2

75s

12675

P 201x30W LED 2US 156x1531

1 0.024

4.9

60s

13258

3F Travetta 1x24 T5 LD HF 2MG

1 0.010

2.3

150s

12680

P 202x24W LED 2US 196x1231

1 0.023

4.5

48s

13259

3F Travetta 1x54 T5 LD HF 2MG

1 0.018

4.3

75s

12682

P 202x30W LED 2US 196x1531

1 0.030

5.8

48s

13260

3F Travetta 1x49 T5 LD HF 2MG

1 0.022

5.2

75s

12687

P 202x24W LED 2US 270x1231

1 0.031

5.9

33s

13261

3F Travetta 1x80 T5 LD HF 2MG

1 0.022

5.2

75s

12689

P 202x30W LED 2US 270x1531

1 0.041

6.7

33s

13262

3F Travetta 2x14 T5 LD HF 2MG

1 0.010

2.5

150s

12692

P 203x10W LED 2US 596x596

1 0.037

5.3

30s

13263

3F Travetta 2x28 T5 LD HF 2MG

1 0.018

4.5

75s

12703

P 201x30W LED SP 156x1531

1 0.024

5.2

60s

13264

3F Travetta 2x35 T5 LD HF 2MG

1 0.022

5.45

75s

12708

P 202x24W LED SP 196x1231

1 0.023

4.7

48s

13265

3F Travetta 2x24 T5 LD HF 2MG

1 0.010

2.5

150s

12710

P 202x30W LED SP 196x1531

1 0.030

48s

13342

3F Travetta GR DI 1x35 T5 LD HF 2S

1 0.022

4.7

75s

12720

P 203x10W LED SP 596x596

1 0.037

5.5

30s

13344

3F Travetta GR DI 1x54 T5 LD HF 2S

1 0.018

3.9

75s

12722

P 204x10W LED SP 596x596

1 0.037

5.6

30s

13345

3F Travetta GR DI 1x49 T5 LD HF 2S

1 0.022

4.7

75s

12731

P 201x30W LED OP 156x1531

1 0.024

5.2

60s

100

13348

3F Travetta GR DI 2x28 T5 LD HF 2S

1 0.018

4.1

75s

12736

P 202x24W LED OP 196x1231

1 0.023

4.7

48s

100

13349

3F Travetta GR DI 2x35 T5 LD HF 2S

1 0.022

4.95

75s

12738

P 202x30W LED OP 196x1531

1 0.030

48s

100

13425

3F Travetta GR 1x14 T5 LD HF 2S

1 0.010

2.3

150s

12748

P 203x10W LED OP 596x596

1 0.037

5.5

30s

100

13427

3F Travetta GR 1x35 T5 LD HF 2S

1 0.022

5.2

75s

12750

P 204x10W LED OP 596x596

1 0.037

5.6

30s

100

13428

3F Travetta GR 1x24 T5 LD HF 2S

1 0.010

2.3

150s

12771

Barraluce P 1x30W LED SP L1471

1 0.050

4.6

70s

116

13429

3F Travetta GR 1x54 T5 LD HF 2S

1 0.018

4.3

75s

12773

Barraluce P 1+1x30W LED SP L2937

1 0.050

9.2

70s

116

13430

3F Travetta GR 1x49 T5 LD HF 2S

1 0.022

5.2

75s

12779

Barraluce P 1x30W LED SP 5P L1466

1 0.050

4.9

70s

116

13431

3F Travetta GR 1x80 T5 LD HF 2S

1 0.022

5.2

75s

12781

Barraluce P 1+1x30W LED SP 5P L2932

1 0.050

9.8

70s

116

13432

3F Travetta GR 2x14 T5 LD HF 2S

1 0.010

2.5

150s

12787

Barraluce P 1x30W LED OP L1471

1 0.050

4.6

70s

115

13433

3F Travetta GR 2x28 T5 LD HF 2S

1 0.018

4.5

75s

12789

Barraluce P 1+1x30W LED OP L2937

1 0.050

9.2

70s

115

13434

3F Travetta GR 2x35 T5 LD HF 2S

1 0.022

5.45

75s

12795

Barraluce P 1x30W LED OP 5P L1466

1 0.050

4.9

70s

115

13435

3F Travetta GR 2x24 T5 LD HF 2S

1 0.010

2.5

150s

12797

Barraluce P 1+1x30W LED OP 5P L2932

1 0.050

9.2

70s

115

13512

3F Travetta DI 1x35 T5 LD HF 2S

1 0.022

4.7

75s

13002

3F Travetta GR DI 1x35 T5 LD HF 2MG

1 0.022

4.7

75s

13514

3F Travetta DI 1x54 T5 LD HF 2S

1 0.018

3.9

75s

481

Analytical guide Packing Code

Packing

Item

Pallets Pcs

m³

Kg 4.7

13515

3F Travetta DI 1x49 T5 LD HF 2S

1 0.022

13518

3F Travetta DI 2x28 T5 LD HF 2S

1 0.018

13519

3F Travetta DI 2x35 T5 LD HF 2S

1 0.022

13595

3F Travetta 1x14 T5 LD HF 2S

1 0.010

13597

3F Travetta 1x35 T5 LD HF 2S

13598

Page

Code

Item Pcs

m³

Pallets

Page

75s

19091

3F Travetta GR 1x49 T5 LD HF OP

1 0.022

4.5

75s

4.1

75s

19094

3F Travetta GR 2x28 T5 LD HF OP

1 0.018

4.1

75s

4.95

75s

19095

3F Travetta GR 2x35 T5 LD HF OP

1 0.022

4.8

75s

2.3

150s

19173

3F Travetta DI 1x35 T5 LD HF OP

1 0.022

4.5

75s

1 0.022

5.2

75s

19175

3F Travetta DI 1x54 T5 LD HF OP

1 0.018

3.8

75s

3F Travetta 1x24 T5 LD HF 2S

1 0.010

2.3

150s

19176

3F Travetta DI 1x49 T5 LD HF OP

1 0.022

4.5

75s

13599

3F Travetta 1x54 T5 LD HF 2S

1 0.018

4.1

75s

19179

3F Travetta DI 2x28 T5 LD HF OP

1 0.018

4.1

75s

13600

3F Travetta 1x49 T5 LD HF 2S

1 0.022

5.2

75s

19180

3F Travetta DI 2x35 T5 LD HF OP

1 0.022

4.8

75s

13601

3F Travetta 1x80 T5 LD HF 2S

1 0.022

5.2

75s

19258

3F Travetta GR DI 1x35 T5 LD HF OP

1 0.022

4.5

75s

13602

3F Travetta 2x14 T5 LD HF 2S

1 0.010

2.5

150s

19260

3F Travetta GR DI 1x54 T5 LD HF OP

1 0.018

3.8

75s

13603

3F Travetta 2x28 T5 LD HF 2S

1 0.018

4.5

75s

19261

3F Travetta GR DI 1x49 T5 LD HF OP

1 0.022

4.5

75s

13604

3F Travetta 2x35 T5 LD HF 2S

1 0.022

5.45

75s

19264

3F Travetta GR DI 2x28 T5 LD HF OP

1 0.018

4.1

75s

13605

3F Travetta 2x24 T5 LD HF 2S

1 0.010

2.5

150s

19265

3F Travetta GR DI 2x35 T5 LD HF OP

1 0.022

4.8

75s

14877

3F Travetta 1x28-54 T5 HF DALI 2MG AMPIA

1 0.018

3.9

75s

21002

L 324x14 T5 LD HF BA 2M

2 0.061

9.6 4s+15d

181

14878

3F Travetta 1x35-49-80 T5 HF DALI 2MG AM

1 0.022

5.15

75s

21003

L 323x14 T5 LD HF BA 2M

2 0.061

9.4 4s+15d

181

14879

3F Travetta 2x28-54 T5 HF DALI 2MG AMPIA

1 0.018

4.3

75s

21010

L 324x14 T5 LD HF DA BA 2M

2 0.061

10 4s+15d

181

14880

3F Travetta 2x35-49-80 T5 HF DALI 2MG AM

1 0.022

5.15

75s

21114

L 321x18 HF 2M

1 0.014

2.5

100s

168

14922

3F Travetta DI 1x28-54 T5 HF DALI 2MG AM

1 0.018

3.9

75s

21115

L 322x18 HF 2M

1 0.019

3.1

66s

168

14923

3F Trav. DI 1x35-49-80 T5 HF DALI 2MG AM

1 0.022

5.15

75s

21116

L 321x36 HF 2M

1 0.027

4.3

49s

168

14924

3F Travetta DI 2x28-54 T5 HF DALI 2MG AM

1 0.018

4.3

75s

21117

L 322x36 HF 2M

1 0.037

5.3

33s

168

14925

3F Trav.DI 2x35-49-80 T5 HF DALI 2MG AM

1 0.022

5.15

75s

21118

L 323x36 HF 2M

1 0.077

14s

168

15380

Fly2 B 2x28 T5 LD HF OP

1 0.032

6.4

43s

21119

L 324x36 HF 2M

1 0.077

9.5

14s

168

15381

Fly2 B 2x54 T5 LD HF OP

1 0.032

6.4

43s

21124

L 322x36 HF 2MG

1 0.037

5.3

33s

170

15388

Fly2 B 4x49 T5 LD HF DA OP

1 0.039

8.2

43s

21125

L 323x36 HF 2MG

1 0.077

14s

170

15426

Fly2 B 2x54 T5 LD HF SPM

1 0.032

43s

21126

L 324x36 HF 2MG

1 0.077

9.5

14s

170

15428

Fly2 B 2x49 T5 LD HF SPM

1 0.039

8.2

43s

21133

L 321x18 HF 2US

1 0.014

2.5

100s

172

15433

Fly2 B 4x49 T5 LD HF DA SPM

1 0.039

43s

21134

L 322x18 HF 2US

1 0.019

3.1

66s

172

15441

Fly2 B 2x54 T5 LD HF EP SPM

1 0.032

7.8

43s

21135

L 321x36 HF 2US

1 0.027

4.3

49s

172

15470

Fly2 B 2x28 T5 LD HF SP

1 0.032

6.25

43s

21136

L 322x36 HF 2US

1 0.037

5.3

33s

172

15471

Fly2 B 2x54 T5 LD HF SP

1 0.032

6.25

43s

21142

L 321x18 HF 2S

1 0.014

2.5

100s

174

15478

Fly2 B 4x49 T5 LD HF DA SP

1 0.039

43s

21143

L 322x18 HF 2S

1 0.019

3.1

66s

174

15696

Fly2 GR 2x54 T5 LD HF SPM

1 0.032

43s

21144

L 321x36 HF 2S

1 0.027

4.3

49s

174

15698

Fly2 GR 2x49 T5 LD HF SPM

1 0.039

8.2

43s

21145

L 322x36 HF 2S

1 0.037

5.3

33s

174

15703

Fly2 GR 4x49 T5 LD HF DA SPM

1 0.039

43s

21146

L 323x36 HF 2S

1 0.077

14s

174

15711

Fly2 GR 2x54 T5 LD HF EP SPM

1 0.032

7.8

43s

21147

L 324x36 HF 2S

1 0.077

9.5

14s

174

15713

Fly2 GR 2x49 T5 LD HF EP SPM

1 0.039

9.2

43s

21153

L 321x18 HF 3AO

1 0.014

2.5

100s

176

15740

Fly2 GR 2x28 T5 LD HF SP

1 0.032

6.25

43s

21154

L 322x18 HF 3AO

1 0.019

3.1

66s

176

15741

Fly2 GR 2x54 T5 LD HF SP

1 0.032

6.25

43s

21155

L 322x36 HF 3AO

1 0.037

5.3

33s

176

15748

Fly2 GR 4x49 T5 LD HF DA SP

1 0.039

43s

21156

L 324x36 HF 3AO

1 0.077

9.5

14s

176

15896

Fly2 Piantana LED 5x10W SPM L717

1 0.040

21171

L 324x18 HF SPA

2 0.064

8.6 4s+14d

177

16058

Fly2 B 2x54 T5 LD HF DALI SPM

1 0.032

43s

21172

L 323x18 HF SPA

2 0.064

8.4 4s+14d

177

16060

Fly2 B 2x49 T5 LD HF DALI SPM

1 0.039

8.4

43s

21175

L 324x18 HF EP SPA

1 0.031

4.85

32s

177

16067

Fly2 B 4x49 T5 LD HF DALI SPM

1 0.039

43s

21176

L 323x18 HF EP SPA

1 0.031

4.65

32s

177

16142

Fly2 GR 2x54 T5 LD HF DALI SPM

1 0.032

43s

21182

L 323x18 HF SP

2 0.064

8.6 4s+14d

178

16144

Fly2 GR 2x49 T5 LD HF DALI SPM

1 0.039

8.4

43s

21188

L 321x18 HF SP

1 0.014

2.8

100s

178

16151

Fly2 GR 4x49 T5 LD HF DALI SPM

1 0.039

43s

21189

L 322x18 HF SP

1 0.019

3.2

66s

178

17479

Fly2 GR 2x49 T5 LD HF DALI SPM IFC

1 0.039

7.4

43s

21190

L 321x36 HF SP

1 0.027

4.9

49s

178

19003

3F Travetta 1x35 T5 LD HF OP

1 0.022

4.5

75s

21191

L 322x36 HF SP

1 0.037

5.5

33s

178

19005

3F Travetta 1x54 T5 LD HF OP

1 0.018

3.8

75s

21192

L 323x36 HF SP

1 0.077

9.6

14s

178

19006

3F Travetta 1x49 T5 LD HF OP

1 0.022

4.5

75s

21193

L 324x36 HF SP

1 0.077

9.9

14s

178

19009

3F Travetta 2x28 T5 LD HF OP

1 0.018

4.1

75s

21244

L 323x10W LED SP 596x596

1 0.030

32s

156

19010

3F Travetta 2x35 T5 LD HF OP

1 0.022

4.8

75s

21245

L 324x10W LED SP 596x596

1 0.030

5.2

32s

156

19088

3F Travetta GR 1x35 T5 LD HF OP

1 0.022

4.5

75s

21256

L 323x10W LED DALI SP 596x596

1 0.030

32s

156

19090

3F Travetta GR 1x54 T5 LD HF OP

1 0.018

3.8

75s

21257

L 324x10W LED DALI SP 596x596

1 0.030

5.2

32s

156

482

Analytical guide Packing Code

Packing

Item

Pallets Pcs

m³

Page

Code

Item Pcs

m³

Pallets

Page

21262

L 323x10W LED EP SP 596x596

1 0.030

5.9

32s

156

22335

L 562x58 HF 2S

1 0.039

6.6

43s

213

21263

L 324x10W LED EP SP 596x596

1 0.030

6.1

32s

156

22368

L 561x18 HF SP

1 0.016

2.95

86s

214

21282

L 323x10W LED Sensor CF SP 596x596

1 0.030

5.2

32s

163

22369

L 561x36 HF SP

1 0.031

5.1

43s

214

21287

L 322x18W LED SP 296x1196

1 0.037

5.4

33s

156

22370

L 561x58 HF SP

1 0.039

6.3

43s

214

21290

L 322x18W LED DALI SP 296x1196

1 0.037

5.4

33s

156

22371

L 562x18 HF SP

1 0.016

3.1

86s

214

21293

L 322x18W LED EP SP 296x1196

1 0.037

5.9

33s

156

22372

L 562x36 HF SP

1 0.031

5.3

43s

214

21393

L 322x24W LED WW 296x1196

1 0.037

5.5

33s

165

22373

L 562x58 HF SP

1 0.039

43s

214

21408

L 320 32W LED OP 596x596

1 0.030

5.1

32s

159

22376

L 561x18 HF IP54 SP

1 0.016

3.2

86s

214

21410

L 320 32W LED DALI OP 596x596

1 0.030

5.1

32s

159

22377

L 561x36 HF IP54 SP

1 0.031

5.3

43s

214

21422

L 320 32W LED LGS 596x596

1 0.030

5.1

32s

159

22378

L 562x18 HF IP54 SP

1 0.016

3.3

86s

214

21424

L 320 32W LED DALI LGS 596x596

1 0.030

5.1

32s

159

22379

L 562x36 HF IP54 SP

1 0.031

5.5

43s

214

21440

L 580 32W LED SP 596x596

1 0.038

22s

217

22400

L 451x14 T5 LD HF 2MG

1 0.007

1.8

140s

205

21447

L 580 32W LED BL SP 621x621

1 0.042

5.4

18s

217

22402

L 451x28 T5 LD HF 2MG

1 0.014

3.5

70s

205

21454

L 580 32W LED VS 596x596

1 0.038

22s

217

22403

L 451x35 T5 LD HF 2MG

1 0.018

4.2

70s

205

21461

L 580 32W LED BL VS 621x621

1 0.042

6.4

18s

217

22404

L 451x49 T5 LD HF 2MG

1 0.018

4.2

70s

205

21489

L 390 32W LED 2MG OP 597x597

1 0.038

4.5

22s

193

22405

L 451x54 T5 LD HF 2MG

1 0.014

3.5

70s

205

21491

L 390 32W LED DALI 2MG OP 597x597

1 0.038

4.7

22s

193

22596

L 451x14 T5 LD HF WW

1 0.007

1.6

140s

205

21497

L 390 2x18W LED 2MG OP 323x1221

1 0.042

5.1

33s

193

22598

L 451x28 T5 LD HF WW

1 0.014

3.3

70s

205

21499

L 390 2x18W LED DALI 2MG OP 323x1221

1 0.042

5.1

33s

193

22599

L 451x35 T5 LD HF WW

1 0.018

70s

205

21506

L 390 33W LED DALI HCL 2MG OP 597x597

1 0.038

7.6

22s

195

22600

L 451x49 T5 LD HF WW

1 0.018

70s

205

21580

L 323x10W LED LGS 596x596

1 0.030

32s

157

22601

L 451x54 T5 LD HF WW

1 0.014

3.3

70s

205

21581

L 324x10W LED LGS 596x596

1 0.030

5.2

32s

157

27523

L 561x14 T5 LD HF 2MG

1 0.016

2.95

86s

211

21586

L 323x10W LED DALI LGS 596x596

1 0.030

32s

157

27524

L 561x28 T5 LD HF 2MG

1 0.031

43s

211

21587

L 324x10W LED DALI LGS 596x596

1 0.030

5.2

32s

157

27525

L 561x54 T5 LD HF 2MG

1 0.031

43s

211

21589

L 323x10W LED EP LGS 596x596

1 0.030

5.9

32s

157

27526

L 561x35 T5 LD HF 2MG

1 0.039

6.2

43s

211

21590

L 324x10W LED EP LGS 596x596

1 0.030

6.1

32s

157

27527

L 561x49 T5 LD HF 2MG

1 0.039

6.2

43s

211

21598

L 323x10W LED Sensor CF LGS 596x596

1 0.030

5.2

32s

163

27528

L 562x14 T5 LD HF 2MG

1 0.016

3.1

86s

211

21600

L 322x18W LED LGS 296x1196

1 0.037

5.4

33s

157

27529

L 562x28 T5 LD HF 2MG

1 0.031

5.1

43s

211

21603

L 322x18W LED DALI LGS 296x1196

1 0.037

5.4

33s

157

27530

L 562x54 T5 LD HF 2MG

1 0.031

5.1

43s

211

21606

L 322x18W LED EP LGS 296x1196

1 0.037

5.9

33s

157

27531

L 562x35 T5 LD HF 2MG

1 0.039

6.7

43s

211

21615

L 323x10W LED DALI HCL LGS 596x596

1 0.038

22s

161

27532

L 562x49 T5 LD HF 2MG

1 0.039

6.7

43s

211

22281

L 561x18 HF 2M

1 0.016

2.85

86s

211

27544

L 561x14 T5 LD HF 2S

1 0.016

2.95

86s

213

22282

L 561x36 HF 2M

1 0.031

4.9

43s

211

27545

L 561x28 T5 LD HF 2S

1 0.031

43s

213

22283

L 561x58 HF 2M

1 0.039

6.1

43s

211

27546

L 561x54 T5 LD HF 2S

1 0.031

43s

213

22284

L 562x18 HF 2M

1 0.016

86s

211

27547

L 561x35 T5 LD HF 2S

1 0.039

6.2

43s

213

22285

L 562x36 HF 2M

1 0.031

5.1

43s

211

27548

L 561x49 T5 LD HF 2S

1 0.039

6.2

43s

213

22286

L 562x58 HF 2M

1 0.039

6.6

43s

211

27549

L 562x14 T5 LD HF 2S

1 0.016

3.1

86s

213

22300

L 561x18 HF 2MG

1 0.016

2.85

86s

212

27550

L 562x28 T5 LD HF 2S

1 0.031

5.2

43s

213

22301

L 561x36 HF 2MG

1 0.031

4.9

43s

212

27551

L 562x54 T5 LD HF 2S

1 0.031

5.1

43s

213

22302

L 561x58 HF 2MG

1 0.039

6.1

43s

212

27552

L 562x35 T5 LD HF 2S

1 0.039

6.7

43s

213

22303

L 562x18 HF 2MG

1 0.016

86s

212

27553

L 562x49 T5 LD HF 2S

1 0.039

6.7

43s

213

22304

L 562x36 HF 2MG

1 0.031

5.1

43s

212

27560

L 404x14 T5 HF 2MG

2 0.076

11.8 2s+12d

199

22305

L 562x58 HF 2MG

1 0.039

6.6

43s

212

27561

L 403x14 T5 HF 2MG

2 0.076

11.6 2s+12d

199

22311

L 561x18 HF 2US

1 0.016

2.85

86s

212

27562

L 404x14 T5 HF DA 2MG

2 0.076

12.2 2s+12d

199

22312

L 561x36 HF 2US

1 0.031

4.9

43s

212

27563

L 403x14 T5 HF DA 2MG

2 0.076

12 2s+12d

199

22313

L 561x58 HF 2US

1 0.039

6.1

43s

212

27590

L 404x14 T5 HF 2S

2 0.076

11.8 2s+12d

201

22314

L 562x18 HF 2US

1 0.016

86s

212

27591

L 403x14 T5 HF 2S

2 0.076

11.6 2s+12d

201

22315

L 562x36 HF 2US

1 0.031

5.1

43s

212

27592

L 404x14 T5 HF DA 2S

2 0.076

12.2 2s+12d

201

22316

L 562x58 HF 2US

1 0.039

6.6

43s

212

27593

L 403x14 T5 HF DA 2S

2 0.076

12 2s+12d

201

22330

L 561x18 HF 2S

1 0.016

2.85

86s

213

27640

L 584x14-24 T5 HF DA RVS

1 0.037

9.95

30s

219

22331

L 561x36 HF 2S

1 0.031

4.9

43s

213

27643

L 582x28-54 T5 HF RVS

1 0.042

10.1

33s

219

22332

L 561x58 HF 2S

1 0.039

6.1

43s

213

27661

L 584x14-24 T5 HF DA BL RVS

1 0.042

10.05

26s

219

22333

L 562x18 HF 2S

1 0.016

86s

213

27664

L 582x28-54 T5 HF BL RVS

1 0.042

10.2

33s

219

22334

L 562x36 HF 2S

1 0.031

5.1

43s

213

27682

L 584x14-24 T5 HF DA CR 2US VT

1 0.053

10.5

18s

220

483

Analytical guide Packing Code

Packing

Item

Pallets Pcs

m³

Page

Code

Item Pcs

m³

Pallets

Page

27724

L 584x14-24 T5 HF DA RSP

1 0.037

7.5

30s

220

36576

Lucequadro LED 2000 EP VS

1 0.019

4.3

76s

127

27727

L 582x28-54 T5 HF RSP

1 0.042

7.65

33s

220

36578

Lucequadro LED 3000 VS

1 0.007

3.5

130s

127

27745

L 584x14-24 T5 HF DA BL RSP

1 0.042

7.6

26s

220

36579

Lucequadro LED 3000 EP VS

1 0.019

4.3

76s

127

27748

L 582x28-54 T5 HF BL RSP

1 0.042

7.75

33s

220

36581

Lucequadro LED 2000 VOP

1 0.007

3.5

130s

127

27902

L 594x14-24 T5 HF DA RVS

1 0.053

11.4

18s

225

36582

Lucequadro LED 2000 EP VOP

1 0.019

4.3

76s

127

27903

L 594x28-54 T5 HF DA RVS

1 0.078

19.5

14s

225

36584

Lucequadro LED 3000 VOP

1 0.007

3.5

130s

127

27907

L 592x28-54 T5 HF RVS

1 0.042

15.2

33s

225

36585

Lucequadro LED 3000 EP VOP

1 0.019

4.3

76s

127

27919

L 594x14-24 T5 HF DA 2US VT

1 0.053

11.4

18s

226

36587

Lucequadro LED 2000 SOP

1 0.008

3.2

130s

128

28826

L 323x10W LED 2S 596x596

1 0.030

4.85

32s

155

36588

Lucequadro LED 2000 EP SOP

1 0.019

76s

128

28829

L 323x10W LED EP 2S 596x596

1 0.030

5.15

32s

155

36590

Lucequadro LED 3000 SOP

1 0.008

3.2

130s

128

28838

L 323x10W LED DALI 2S 596x596

1 0.030

4.85

32s

155

36591

Lucequadro LED 3000 EP SOP

1 0.019

76s

128

28844

L 323x10W LED 2MG 596x596

1 0.030

4.85

32s

155

36601

Lucequadro LED 4000 2MG VDT

1 0.018

54s

131

28847

L 323x10W LED EP 2MG 596x596

1 0.030

5.15

32s

155

37507

3F Drop LED GR 3000

2 0.011

36d

28856

L 323x10W LED DALI 2MG 596x596

1 0.030

4.85

32s

155

37542

Galassia 220 LED AB 2000 VOP

1 0.007

2.5

130s

138

34229

3F Petra OP 300 12W LED

1 0.013

1.2

96s

37544

Galassia 220 LED AB 2000 EP VOP

1 0.019

3.5

45s

138

34233

3F Petra OP 300 12W LED Sensor

1 0.013

1.2

96s

37551

Galassia 220 LED AB 2000 VS

1 0.007

2.5

130s

137

34330

3F Petra OP 380 22W LED

1 0.022

54s

37553

Galassia 220 LED AB 2000 EP VS

1 0.019

3.5

45s

137

34334

3F Petra OP 380 22W LED Sensor

1 0.022

54s

37578

Galassia 220 LED AB 3000 VOP

1 0.007

2.5

130s

138

34345

3F Petra OP 620 1x40+1x60 T5-R LDHFDA SO

1 0.055

5.8

18s

37580

Galassia 220 LED AB 3000 EP VOP

1 0.019

3.5

45s

138

34407

3F Petra OP 620 50W LED

1 0.055

18s

37587

Galassia 220 LED AB 3000 VS

1 0.007

2.5

130s

137

34650

3F Petra Trasparente 620 4x26CD LD HF DA

1 0.055

5.7

18s

37589

Galassia 220 LED AB 3000 EP VS

1 0.019

3.5

45s

137

34653

3F Petra Tras.620 1x40+60 T5-R LD HF DA

1 0.055

5.8

18s

37604

Galassia 220 LED AB 4000 VS

1 0.011

80s

137

34658

3F Petra Trasp 620 4x26 CD LD HF DA EP

1 0.055

6.2

18s

37608

Galassia 220 LED AB 4000 VOP

1 0.011

80s

138

35050

3F Petra GR 300 1x22 LD

1 0.013

1.35

96s

37750

Galassia 220 LED 2000

1 0.007

130s

135

35100

3F Petra GR 300 1x22 T5-R LD HF

1 0.013

1.25

96s

37752

Galassia 220 LED 2000 EP

1 0.019

45s

135

35103

3F Petra GR 300 1x13 CD LD HF

1 0.013

1.15

96s

37759

Galassia 220 LED 2000 VT

1 0.007

2.5

130s

135

35104

3F Petra GR 300 1x18 CD LD HF

1 0.013

1.1

96s

37761

Galassia 220 LED 2000 EP VT

1 0.019

3.5

45s

135

35105

3F Petra GR 300 1x26 CD LD HF

1 0.013

1.2

96s

37768

Galassia 220 LED 2000 VOP

1 0.007

2.5

130s

136

35108

3F Petra GR 300 2x13 CD LD HF

1 0.013

1.6

96s

37770

Galassia 220 LED 2000 EP VOP

1 0.019

3.5

45s

136

35125

3F Petra GR 300 1x22 T5-R LD HF EP

1 0.013

1.75

96s

37777

Galassia 220 LED 2000 VS

1 0.007

2.5

130s

136

35130

3F Petra GR 300 1x26 CD LD HF EP

1 0.013

1.7

96s

37779

Galassia 220 LED 2000 EP VS

1 0.019

3.5

45s

136

35205

3F Petra GR 380 1x32 LD HF

1 0.022

2.5

54s

37793

Galassia 220 LED 3000

1 0.007

130s

135

35207

3F Petra GR 380 1x32 LD HF EP

1 0.022

54s

37795

Galassia 220 LED 3000 EP

1 0.019

45s

135

35211

3F Petra GR 380 1x40 T5-R LD HF

1 0.022

54s

37802

Galassia 220 LED 3000 VT

1 0.007

2.5

130s

135

35219

3F Petra GR 380 2x18 CD LD HF

1 0.022

2.25

54s

37804

Galassia 220 LED 3000 EP VT

1 0.019

3.5

45s

135

35220

3F Petra GR 380 2x26 CD LD HF

1 0.022

2.35

54s

37811

Galassia 220 LED 3000 VOP

1 0.007

2.5

130s

136

35231

3F Petra GR 380 1x40 T5-R LD HF EP

1 0.022

2.5

54s

37813

Galassia 220 LED 3000 EP VOP

1 0.019

3.5

45s

136

35240

3F Petra GR 380 2x26 CD LD HF EP

1 0.022

2.85

54s

37820

Galassia 220 LED 3000 VS

1 0.007

2.5

130s

136

35465

3F Petra ME OP 300 1x22 T5-R LD HF IP64

1 0.013

1.25

96s

37822

Galassia 220 LED 3000 EP VS

1 0.019

3.5

45s

136

35705

3F Petra Trasparente 300 1x26 CD LD HF

1 0.013

1.2

96s

37830

Galassia 220 LED 4000

1 0.011

2.5

80s

135

35730

3F Petra Trasparente 300 1x26 CD LD HF EP

1 0.013

1.7

96s

37834

Galassia 220 LED 4000 VT

1 0.011

80s

135

35811

3F Petra Trasparente 380 1x40 T5-R LD HF

1 0.022

54s

37838

Galassia 220 LED 4000 VS

1 0.011

80s

136

35820

3F Petra Trasparente 380 2x26 CD LD HF

1 0.022

2.35

54s

37842

Galassia 220 LED 4000 VOP

1 0.011

80s

136

35831

3F Petra Trasp 380 1x40 T5-R LD HF EP

1 0.022

2.5

54s

37859

3F Petra OP 300 1x22 T5-R LD HF IP64

1 0.013

1.25

96s

35840

3F Petra Trasparente 380 2x26 CD LD HF EP

1 0.022

2.85

54s

37864

3F Petra OP 300 1x26 CD LD HF IP64

1 0.013

1.2

96s

36202

3F Dodeca 220 AC 1x26 CD HF 2MG VDT

1 0.019

1.9

90s

145

37884

3F Petra OP 300 1x22 T5-R LD HF EP IP64

1 0.013

1.75

96s

36205

3F Dodeca 220 AC 2x26 CD HF 2MG VDT

1 0.019

2.75

90s

145

37889

3F Petra OP 300 1x26 CD LD HF EP IP64

1 0.013

1.7

96s

36231

3F Dodeca 220 AC 1x26 CD HF EP 2MG VDT

1 0.019

2.7

60s

145

37927

3F Petra ME OP 380 1x22 T5-R LD HF IP64

1 0.022

1.95

54s

36234

3F Dodeca 220 AC 2x26 CD HF EP 2MG VDT

1 0.019

3.55

60s

145

37928

3F Petra ME OP 380 1x40 T5-R LD HF IP64

1 0.022

54s

36381

3F Dodeca 300 2x32 CT HF 2MG SK

1 0.022

2.8

60s

151

37941

3F Petra OP 620 1x40+1x60T5-RLDHFDA IP65

1 0.055

5.8

18s

36382

3F Dodeca 300 2x42 CT HF 2MG SK

1 0.022

2.85

60s

151

37969

3F Petra OP 380 1x22 T5-R LD HF IP64

1 0.022

1.95

54s

36423

3F Dodeca 300 2x32 CT HF EP 2MG SK

1 0.026

3.75

45s

151

37970

3F Petra OP 380 1x40 T5-R LD HF IP64

1 0.022

54s

36424

3F Dodeca 300 2x42 CT HF EP 2MG SK

1 0.026

3.8

45s

151

37979

3F Petra OP 380 2x26 CD LD HF IP64

1 0.022

2.35

54s

36575

Lucequadro LED 2000 VS

1 0.007

3.5

130s

127

37989

3F Petra OP 380 1x22 T5-R LD HF EP IP64

1 0.022

2.45

54s

484

Analytical guide Packing Code

Packing

Item

Pallets Pcs

m³

1 0.022

2.5

54s

37990

3F Petra OP 380 1x40 T5-R LD HF EP IP64

37999

3F Petra OP 380 2x26 CD LD HF EP IP64

1 0.022

2.85

40911

3F Rocket M LED B 3000/930

1 0.033

40912

3F Rocket M LED GR 3000/930

1 0.033

40916

3F Rocket M LED B 2000/MEAT

40917

Page

Code

Item Pcs

Pallets

Page

9.45

42s

340

m³

1 0.031

55147

i3F LED 762x24W EP AMPIO VS L1265

54s

55149

i3F LED 762x30W EP AMPIO VS L1565

1 0.039

11.5

42s

340

36s

271

55205

A3F LED 902x44W AMPIO L1565

1 0.052

7.3

31s

343

36s

271

55271

A3F LED 912x44W AMPIO VT L1565

1 0.039

10.5

42s

344

1 0.033

36s

271

55337

A3F LED 912x44W AMPIO VS L1565

1 0.039

10.5

42s

344

3F Rocket M LED GR 2000/MEAT

1 0.033

36s

271

55596

i3F LED 752x12W AMPIO L655

1 0.017

3.7

80s

339

40921

3F Rocket M LED B 2000/FRESH FOOD

1 0.033

36s

271

55598

i3F LED 752x24W AMPIO L1265

1 0.042

6.2

31s

339

40922

3F Rocket M LED GR 2000/FRESH FOOD

1 0.033

36s

271

55600

i3F LED 752x30W AMPIO L1565

1 0.052

7.5

31s

339

40979

3F Rocket L LED GR 4000/930

1 0.010

2.1

36s

273

55607

i3F LED 752x12W EP AMPIO L655

1 0.017

4.7

80s

339

40980

3F Rocket L LED B 4000/930

1 0.010

2.1

36s

273

55609

i3F LED 752x24W EP AMPIO L1265

1 0.042

7.2

31s

339

40984

3F Rocket L LED GR 5000/930

1 0.010

2.1

36s

273

55611

i3F LED 752x30W EP AMPIO L1565

1 0.052

8.5

31s

339

40985

3F Rocket L LED B 5000/930

1 0.010

2.1

36s

273

55666

i3F LED 762x30W CONC VT L1565

1 0.039

10.5

42s

341

48017

3F Fil 180 LED 2x30W RSP L1550

1 0.026

6.7

60s

277

55677

i3F LED 762x30W EP CONC VT L1565

1 0.039

11.5

42s

341

48019

3F Fil 180 LED 2+2x30W RSP L3100

1 0.051

13.5

60s

277

55799

A3F LED 902x44W CONC L1565

1 0.052

7.3

31s

343

48026

3F Fil 180 LED 2x22W RSP L1550

1 0.026

6.7

60s

277

55865

A3F LED 912x44W CONC VT L1565

1 0.039

10.5

42s

345

48028

3F Fil 180 LED 2+2x22W RSP L3100

1 0.051

13.5

60s

277

55931

3F LEM 2 LED 100 AMPIO

1 0.045

28s

291

48030

3F Fil 180 LED 2x30W RSP AMPIO L1550

1 0.026

6.7

60s

277

55932

3F LEM 3 LED 150 AMPIO

1 0.052

28s

291

48032

3F Fil 180 LED 2+2x30W RSP AMPIO L3100

1 0.051

13.5

60s

277

55933

3F LEM 4 LED 200 AMPIO

1 0.068

12s

291

48060

3F Fil 180 LED 1x30W 2US L1550

1 0.026

6.2

60s

278

55938

3F LEM 3 LED 150 CONC

1 0.052

28s

291

48062

3F Fil 180 LED 2x30W 2US L1550

1 0.026

6.4

60s

278

55939

3F LEM 4 LED 200 CONC

1 0.068

12s

291

48064

3F Fil 180 LED 1+1x30W 2US L3100

1 0.051

12.4

60s

278

55943

3F LEM 2 LED 100 DALI AMPIO

1 0.045

28s

293

48066

3F Fil 180 LED 2+2x30W 2US L3100

1 0.051

12.8

60s

278

55944

3F LEM 3 LED 150 DALI AMPIO

1 0.052

28s

293

53438

i3F LED 764x50W CR AMPIO VT L1251

1 0.095

18.9

15s

371

55945

3F LEM 4 LED 200 DALI AMPIO

1 0.068

12s

293

53445

i3F LED 764x63W CR AMPIO VT L1551

1 0.117

20.9

15s

371

55950

3F LEM 3 LED 150 DALI CONC

1 0.052

28s

293

53452

i3F LED 764x50W CR AMPIO SL L1251

1 0.095

15.5

15s

371

55951

3F LEM 4 LED 200 DALI CONC

1 0.068

12s

293

53459

i3F LED 764x63W CR AMPIO SL L1551

1 0.117

17.5

15s

371

56003

3F LEM 2 LED 100/865 AMPIO

1 0.045

28s

292

53490

Beta Iperconc LED 4x30W CR VT IP64 L1551

1 0.117

15s

371

56004

3F LEM 3 LED 150/865 AMPIO

1 0.052

28s

292

53493

Beta Iperconc LED 4x30W CR SL IP64 L1551

1 0.117

15s

371

56005

3F LEM 4 LED 200/865 AMPIO

1 0.068

12s

292

53860

A3F Ice LED 902x12W UR95 AMPIO L655

1 0.017

3.8

80s

347

56010

3F LEM 3 LED 150/865 CONC

1 0.052

28s

292

53861

A3F Ice LED 902x24W UR95 AMPIO L1265

1 0.042

42s

347

56011

3F LEM 4 LED 200/865 CONC

1 0.068

12s

292

53862

A3F Ice LED 902x30W UR95 AMPIO L1565

1 0.052

42s

347

56076

3F LEM 3 LED 150 DALI Sensor AMPIO

1 0.068

15.4

28s

299

53863

A3F Ice LED 902x60W UR95 AMPIO L1565

1 0.039

7.8

42s

347

56077

3F LEM 4 LED 200 DALI Sensor AMPIO

1 0.078

18.4

12s

299

53867

A3F Ice LED 902x30W UR95 CONC L1565

1 0.052

42s

347

56082

3F LEM 3 LED 150 DALI Sensor CONC

1 0.068

15.4

28s

299

53868

A3F Ice LED 902x60W UR95 CONC L1565

1 0.052

7.8

42s

347

56083

3F LEM 4 LED 200 DALI Sensor CONC

1 0.078

18.4

12s

299

53884

A3F 931x18 HF

1 0.017

4.6

80s

368

56123

3F LEM 2 HT LED 60 AMPIO

1 0.045

28s

301

53885

A3F 932x18 HF

1 0.017

4.8

80s

368

56124

3F LEM 3 HT LED 90 AMPIO

1 0.052

14.5

28s

301

53890

A3F 931x36 HF AMPIO

1 0.031

42s

368

56125

3F LEM 4 HT LED 120 AMPIO

1 0.068

17.5

12s

301

53891

A3F 931x58 HF AMPIO

1 0.039

9.3

42s

368

56130

3F LEM 3 HT LED 90 CONC

1 0.052

28s

301

53892

A3F 932x36 HF AMPIO

1 0.031

8.1

42s

368

56131

3F LEM 4 HT LED 120 CONC

1 0.068

12s

301

53893

A3F 932x58 HF AMPIO

1 0.039

9.8

42s

368

56200

3F Cub R90 4x55 CR

2 0.191

2s+5d

387

53898

A3F 932x36 HF EP AMPIO

1 0.031

8.6

42s

368

56203

3F Cub R90 4x55 EP CR

2 0.191

18.6

2s+5d

387

53899

A3F 932x58 HF EP AMPIO

1 0.039

10.6

42s

368

56206

3F Cub R90 4x55 CR CONC

2 0.191

2s+5d

388

53904

A3F 931x58 HF CONC

1 0.039

9.3

42s

368

56208

3F Cub R90 4x55 EP CR CONC

2 0.191

20.6

2s+5d

388

53905

A3F 932x58 HF CONC

1 0.039

9.8

42s

368

56210

3F Cub 4x55 CR VT IP64

2 0.191

2s+5d

387

53934

3F Linda HS 1x49 T5 LD HF

1 0.020

2.97

90s

327

56211

3F Cub 4x55 EP CR VT IP64

2 0.191

27.6

2s+5d

387

53956

3F Linda HS 2x49 T5 LD HF

1 0.030

4.08

56s

327

56212

3F Cub 4x55 CR CONC VT IP64

2 0.191

2s+5d

388

55006

i3F LED 752x30W CONC L1565

1 0.052

7.5

31s

339

56213

3F Cub 4x55 EP CR CONC VT IP64

2 0.191

27.6

2s+5d

388

55017

i3F LED 752x30W EP CONC L1565

1 0.052

8.5

31s

339

56214

3F Cub 4x55 CR SL IP64

2 0.191

2s+5d

387

55072

i3F LED 762x30W AMPIO VT L1565

1 0.039

10.5

42s

340

56215

3F Cub 4x55 EP CR SL IP64

2 0.191

22.4

2s+5d

387

55083

i3F LED 762x30W EP AMPIO VT L1565

1 0.039

11.5

42s

340

56216

3F Cub 4x55 CR CONC SL IP64

2 0.191

22.8

2s+5d

388

55134

i3F LED 762x12W AMPIO VS L655

1 0.017

5.1

80s

340

56217

3F Cub 4x55 EP CR CONC SL IP64

2 0.191

24.4

2s+5d

388

55136

i3F LED 762x24W AMPIO VS L1265

1 0.031

8.45

42s

340

56330

3F CUB LED 100W CR VT

2 0.191

23.6

2s+5d

381

55138

i3F LED 762x30W AMPIO VS L1565

1 0.039

10.5

42s

340

56332

3F CUB LED 100W DALI CR VT

2 0.191

23.6

2s+5d

381

55145

i3F LED 762x12W EP AMPIO VS L655

1 0.017

6.1

80s

340

56333

3F CUB LED 150W CR VT

2 0.191

2s+5d

381

485

Analytical guide Packing Code

Packing

Item

Pallets Pcs

m³

Page

Code

Item Pcs

m³

Pallets

Page

56335

3F CUB LED 150W DALI CR VT

2 0.191

2s+5d

381

56510

Beta Iperconc 2x80 T5 HO LD HF CR VT IP64

1 0.117

15s

375

56337

3F CUB LED 100W CR VS

2 0.191

23.6

2s+5d

382

56511

Beta Iperc. 2+2x80T5 HO LD HF CR VT IP64

1 0.117

20.5

15s

375

56339

3F CUB LED 100W DALI CR VS

2 0.191

23.6

2s+5d

382

56512

Beta Iperc. 2+2x54T5 HO LD HF CR VT IP64

1 0.095

17.5

15s

375

56340

3F CUB LED 150W CR VS

2 0.191

2s+5d

382

56515

Beta Iperconc 2x80 T5 HO LD HF CR IP43

1 0.117

12s

374

56342

3F CUB LED 150W DALI CR VS

2 0.191

2s+5d

382

56516

Beta Iperconc 2+2x80 T5 HO LD HF CR IP43

1 0.117

12s

374

56344

3F CUB LED 100W CR SP

2 0.191

19.6

2s+5d

381

56517

Beta Iperconc 2+2x54 T5 HO LD HF CR IP43

1 0.095

12s

374

56346

3F CUB LED 100W DALI CR SP

2 0.191

19.6

2s+5d

381

56520

Beta Iperconc 2x80 T5 HO LD HF CR SL IP64

1 0.117

15s

375

56347

3F CUB LED 150W CR SP

2 0.191

2s+5d

381

56521

Beta Iperc. 2+2x80T5 HO LD HF CR SL IP64

1 0.117

17.5

15s

375

56349

3F CUB LED 150W DALI CR SP

2 0.191

2s+5d

381

56522

Beta Iperc. 2+2x54T5 HO LD HF CR SL IP64

1 0.095

15s

375

56400

i3F 751x49 T5 HO HF AMPIO

1 0.052

7.35

31s

356

56583

3F LEM 2 HO LED 140 AMPIO

1 0.045

28s

295

56401

i3F 751x80 T5 HO HF AMPIO

1 0.052

7.35

31s

356

56584

3F LEM 3 HO LED 210 AMPIO

1 0.052

21s

295

56402

i3F 752x49 T5 HO HF AMPIO

1 0.052

31s

356

56585

3F LEM 4 HO LED 280 AMPIO

1 0.068

12s

295

56403

i3F 752x80 T5 HO HF AMPIO

1 0.052

31s

356

56589

3F LEM 2 HO LED 140 CONC

1 0.045

28s

295

56406

i3F 751x80 T5 HO HF CONC

1 0.052

7.35

31s

356

56590

3F LEM 3 HO LED 210 CONC

1 0.052

21s

295

56407

i3F 752x80 T5 HO HF CONC

1 0.052

31s

356

56595

3F LEM 2 HO LED 140 DALI AMPIO

1 0.045

28s

296

56410

i3F 761x49 T5 HO HF AMPIO

1 0.039

10.15

42s

358

56596

3F LEM 3 HO LED 210 DALI AMPIO

1 0.052

21s

296

56411

i3F 761x80 T5 HO HF AMPIO

1 0.039

10.15

42s

358

56597

3F LEM 4 HO LED 280 DALI AMPIO

1 0.068

12s

296

56412

i3F 762x49 T5 HO HF AMPIO

1 0.039

10.7

42s

358

56601

3F LEM 2 HO LED 140 DALI CONC

1 0.045

28s

296

56413

i3F 762x80 T5 HO HF AMPIO

1 0.039

10.7

42s

358

56602

3F LEM 3 HO LED 210 DALI CONC

1 0.052

21s

296

56416

i3F 761x80 T5 HO HF CONC

1 0.039

10.15

42s

358

57004

i3F 714x58 LD HF CR AMPIO IP43

1 0.117

12s

373

56417

i3F 762x80 T5 HO HF CONC

1 0.039

10.7

42s

358

57012

i3F 714x58 LD HF CR CONC IP43

1 0.117

12s

373

56420

A3F 901x49 T5 HO HF AMPIO

1 0.039

6.15

42s

362

57049

i3F 764x58 LD HF CR AMPIO SL IP64

1 0.117

16.1

15s

374

56421

A3F 901x80 T5 HO HF AMPIO

1 0.039

6.15

42s

362

57055

i3F 764x58 LD HF CR CONC SL IP64

1 0.117

16.1

15s

375

56422

A3F 902x49 T5 HO HF AMPIO

1 0.039

6.7

42s

362

57094

i3F 764x58 LD HF CR AMPIO IP64

1 0.117

19.7

15s

374

56423

A3F 902x80 T5 HO HF AMPIO

1 0.039

6.7

42s

362

57102

i3F 764x58 LD HF CR CONC IP64

1 0.117

19.7

15s

375

56426

A3F 901x80 T5 HO HF CONC

1 0.039

6.15

42s

362

57390

i3F 764x55 C AMPIO IP64

1 0.050

11.56

28s

374

56427

A3F 902x80 T5 HO HF CONC

1 0.039

6.7

42s

362

58457

3F Linda LED Ice 1x24W UR95 L1270

1 0.016

2.5

90s

319

56430

A3F 911x49 T5 HO HF AMPIO

1 0.039

9.15

42s

364

58459

3F Linda LED Ice 2x24W UR95 L1270

1 0.024

3.3

56s

319

56431

A3F 911x80 T5 HO HF AMPIO

1 0.039

9.15

42s

364

58461

3F Linda LED Ice 1x30W UR95 L1570

1 0.020

90s

319

56432

A3F 912x49 T5 HO HF AMPIO

1 0.039

9.7

42s

364

58463

3F Linda LED Ice 2x30W UR95 L1570

1 0.030

3.7

56s

319

56433

A3F 912x80 T5 HO HF AMPIO

1 0.039

9.7

42s

364

58561

3F Linda LED 1x12W L660

1 0.008

1.42

180s

307

56436

A3F 911x80 T5 HO HF CONC

1 0.039

9.15

42s

364

58563

3F Linda LED 1x6W L660

1 0.008

1.42

180s

307

56437

A3F 912x80 T5 HO HF CONC

1 0.039

9.7

42s

364

58567

3F Linda LED 1x12W EP LA L660

1 0.013

1.95

112s

307

56450

i3F 764x54 T5 HO LD HF CR AMPIO IP64

1 0.095

17.9

15s

374

58569

3F Linda LED 1x6W EP LA L660

1 0.013

1.95

112s

307

56451

i3F 764x80 T5 HO LD HF CR AMPIO IP64

1 0.117

19.5

15s

374

58583

3F Linda LED 1x24W L1270

1 0.016

2.32

90s

307

56453

i3F 764x80 T5 HO LD HF CR CONC IP64

1 0.117

19.5

15s

375

58589

3F Linda LED 1x24W EP L1270

1 0.016

3.1

90s

307

56458

i3F 714x54 T5 HO LD HF CR AMPIO IP43

1 0.095

10.5

12s

373

58594

3F Linda LED 2x24W L1270

1 0.024

3.1

56s

307

56459

i3F 714x80 T5 HO LD HF CR AMPIO IP43

1 0.117

13.9

12s

373

58595

3F Linda LED 2x24W/865 L1270

1 0.024

3.1

56s

307

56461

i3F 714x80 T5 HO LD HF CR CONC IP43

1 0.117

13.9

12s

373

58596

3F Linda LED 2x24W/830 L1270

1 0.024

3.1

56s

307

56466

i3F 764x54 T5 HO LD HF CR AMPIO SL IP64

1 0.095

17.9

15s

374

58600

3F Linda LED 2x24W EP L1270

1 0.024

3.3

56s

307

56467

i3F 764x80 T5 HO LD HF CR AMPIO SL IP64

1 0.117

19.5

15s

374

58601

3F Linda LED 2x24W/865 EP L1270

1 0.024

3.3

56s

307

56469

i3F 764x80 T5 HO LD HF CR CONC SL IP64

1 0.117

19.5

15s

375

58602

3F Linda LED 2x24W/830 EP L1270

1 0.024

3.3

56s

307

56474

i3F 766x49 T5 HO LD HF CR AMPIO IP64

1 0.117

15s

374

58605

3F Linda LED 1x30W L1570

1 0.020

2.8

90s

307

56475

i3F 766x54 T5 HO LD HF CR AMPIO IP64

1 0.095

18.5

15s

374

58611

3F Linda LED 1x30W EP L1570

1 0.020

3.8

90s

307

56478

i3F 766x49 T5 HO LD HF CR CONC IP64

1 0.117

15s

375

58616

3F Linda LED 2x30W L1570

1 0.030

56s

307

56479

i3F 766x54 T5 HO LD HF CR CONC IP64

1 0.095

18.5

15s

375

58617

3F Linda LED 2x30W/865 L1570

1 0.030

3.7

56s

307

56484

i3F 716x49 T5 HO LD HF CR AMPIO IP43

1 0.117

42s

373

58618

3F Linda LED 2x30W/830 L1570

1 0.030

3.7

56s

307

56485

i3F 716x54 T5 HO LD HF CR AMPIO IP43

1 0.095

12.6

12s

373

58623

3F Linda LED 2x30W EP L1570

1 0.030

4.5

56s

307

56488

i3F 716x49 T5 HO LD HF CR CONC IP43

1 0.117

42s

373

58624

3F Linda LED 2x30W/865 EP L1570

1 0.030

3.9

56s

307

56489

i3F 716x54 T5 HO LD HF CR CONC IP43

1 0.095

12.6

12s

373

58625

3F Linda LED 2x30W/830 EP L1570

1 0.030

3.9

56s

307

56494

i3F 766x49 T5 HO LD HF CR AMPIO SL IP64

1 0.117

15s

374

58630

3F Linda LED 2x24W CONC L1270

1 0.024

3.6

56s

309

56495

i3F 766x54 T5 HO LD HF CR AMPIO SL IP64

1 0.095

18.5

15s

374

58632

3F Linda LED 2x30W CONC L1570

1 0.030

4.3

56s

309

56498

i3F 766x49 T5 HO LD HF CR CONC SL IP64

1 0.117

15s

375

58638

3F Linda LED 1x30W Sensor L1570

1 0.020

90s

321

56499

i3F 766x54 T5 HO LD HF CR CONC SL IP64

1 0.095

18.5

15s

375

58642

3F Linda LED 2x30W Sensor L1570

1 0.030

56s

321

486

Analytical guide Packing Code

Packing

Item

Pallets Pcs

Page

m³

1 0.020

90s

321

Code

Item Pcs

Pallets

Page

32s

185

m³

260092 L 353x14W LED SP 54V 596x596

1 0.030

58645

3F Linda LED 1x30W Sensor CF L1570

58649

3F Linda LED 2x30W Sensor CF L1570

1 0.030

56s

321

260094 L 353x14W LED DALI SP 54V 596x596

1 0.030

32s

185

58659

3F Linda LED 2x24W AMPIO L1270

1 0.024

3.6

56s

309

260171 Barraluce L 1x28-54 T5 HF OP

1 0.050

70s

233

58661

3F Linda LED 2x30W AMPIO L1570

1 0.030

4.3

56s

309

260182 Barraluce L 1x35-49-80 T5 HF OP

1 0.050

4.5

70s

233

58705

3F Linda LED 1x12W ENP LA L660

1 0.013

1.75

112s

307

260565 Barraluce L 2x28-54 T5 HF OP

1 0.050

4.5

70s

233

58713

3F Linda LED 1x24W ENP L1270

1 0.016

2.55

90s

307

260572 Barraluce L 2x35-49-80 T5 HF OP

1 0.050

70s

233

58724

3F Linda LED HS 1x30W L1570

1 0.020

2.8

90s

310

263060 Barraluce L 1x28-54 T5 HF 2MG

1 0.050

70s

235

58730

3F Linda LED HS 2x30W L1570

1 0.030

3.7

56s

310

263071 Barraluce L 1x35-49-80 T5 HF 2MG

1 0.050

4.5

70s

235

58742

3F Linda LED OP 1x12W L660

1 0.008

1.42

180s

315

263455 Barraluce L 2x28-54 T5 HF 2MG

1 0.050

4.5

70s

235

58745

3F Linda LED OP 1x24W L1270

1 0.016

2.32

90s

315

263462 Barraluce L 2x35-49-80 T5 HF 2MG

1 0.050

70s

235

58748

3F Linda LED OP 1x30W L1570

1 0.020

2.8

90s

315

265007 Barraluce L 1x28-54 T5 HF OP IFC 5P

1 0.050

70s

233

58762

3F Linda LED Basic 1x19W L1270

1 0.016

2.32

90s

310

265014 Barraluce L 1x35-49-80 T5 HF OP IFC 5P

1 0.050

4.5

70s

233

58763

3F Linda LED Basic 2x19W L1270

1 0.024

3.1

56s

310

265021 Barraluce L 1+1x28-54 T5 HF OP IFC 5P

1 0.050

70s

233

58764

3F Linda LED Basic 1x23W L1570

1 0.020

2.8

90s

310

265028 Barraluce L 1+1x35-49-80 T5 HF OP IFC 5P

1 0.050

70s

233

58765

3F Linda LED Basic 2x23W L1570

1 0.030

3.7

56s

310

265879 Barraluce L 1+1x28-54 T5 HF OP IC 5P

1 0.050

70s

233

58806

3F Linda LED Trasparente 1x12W L660

1 0.008

1.42

180s

317

265886 Barraluce L 1+1x35-49-80 T5 HF OP IC 5P

1 0.050

70s

233

58808

3F Linda LED Trasparente 1x24W L1270

1 0.016

2.32

90s

317

268004 Barraluce L 1x28-54 T5 HF 2MG 5P

1 0.050

70s

235

58809

3F Linda LED Trasparente 2x24W L1270

1 0.024

3.1

56s

317

268011 Barraluce L 1x35-49-80 T5 HF 2MG 5P

1 0.050

4.5

70s

235

58810

3F Linda LED Trasparente 1x30W L1570

1 0.020

2.8

90s

317

268018 Barraluce L 1+1x28-54 T5 HF 2MG 5P

1 0.050

70s

235

58811

3F Linda LED Trasparente 2x30W L1570

1 0.030

3.7

56s

317

268025 Barraluce L 1+1x35-49-80 T5 HF 2MG 5P

1 0.050

70s

235

164719 3F Canda LED 2x8W 2MG 300x300

1 0.009

1.8

144s

269330 Barraluce L 1x30W LED SP L1496

1 0.050

4.6

70s

230

164723 3F Canda LED 2x8W SP 300x300

1 0.009

1.9

144s

269332 Barraluce L 1+1x30W LED SP L2962

1 0.050

9.2

70s

230

164732 3F Canda LED 2x12W 2MG 430x430

1 0.018

70s

269338 Barraluce L 1x30W LED SP 5P L1466

1 0.050

4.9

70s

230

164736 3F Canda LED 2x12W SP 430x430

1 0.018

3.2

70s

269340 Barraluce L 1+1x30W LED SP 5P L2932

1 0.050

9.8

70s

230

166027 3F Canda 2x28 T5 HF 2MG

1 0.028

6.15

44s

269346 Barraluce L 1x30W LED OP L1496

1 0.050

4.6

70s

229

166029 3F Canda 2x35 T5 HF 2MG

1 0.034

7.25

44s

269348 Barraluce L 1+1x30W LED OP L2962

1 0.050

9.2

70s

229

166041 3F Canda 2x28 T5 HF EP 2MG

1 0.028

6.95

44s

269354 Barraluce L 1x30W LED OP 5P L1466

1 0.050

4.9

70s

229

166043 3F Canda 2x35 T5 HF EP 2MG

1 0.034

8.05

44s

269356 Barraluce L 1+1x30W LED OP 5P L2932

1 0.050

9.8

70s

229

166055 3F Canda 2x28 T5 HF D1-10V 2MG

1 0.028

6.35

44s

270931 L 561x12W LED 2S 221x647

1 0.016

86s

209

166057 3F Canda 2x35 T5 HF D1-10V 2MG

1 0.034

7.5

44s

270933 L 561x24W LED 2S 221x1256

1 0.031

43s

209

167327 3F Canda DI 2x28 T5 HF 2MG

1 0.028

5.75

44s

270935 L 561x30W LED 2S 221x1556

1 0.039

6.2

43s

209

167329 3F Canda DI 2x35 T5 HF 2MG

1 0.034

6.8

44s

270937 L 562x12W LED 2S 221x647

1 0.016

3.2

86s

209

167341 3F Canda DI 2x28 T5 HF EP 2MG

1 0.028

6.55

44s

270939 L 562x24W LED 2S 221x1256

1 0.031

5.2

43s

209

167343 3F Canda DI 2x35 T5 HF EP 2MG

1 0.034

7.6

44s

270941 L 562x30W LED 2S 221x1556

1 0.039

6.4

43s

209

167355 3F Canda DI 2x28 T5 HF D1-10V 2MG

1 0.028

5.85

44s

270957 L 561x12W LED SP 221x647

1 0.016

3.2

86s

209

167357 3F Canda DI 2x35 T5 HF D1-10V 2MG

1 0.034

6.9

44s

270959 L 561x24W LED SP 221x1256

1 0.031

5.2

43s

209

170215 Barraluce P 1x28-54 T5 HF OP

1 0.050

70s

119

270961 L 561x30W LED SP 221x1556

1 0.039

6.4

43s

209

170221 Barraluce P 1x35-49-80 T5 HF OP

1 0.050

4.5

70s

119

270963 L 562x12W LED SP 221x647

1 0.016

3.4

86s

209

171536 Barraluce P 1x28-54 T5 HF 2MG

1 0.050

70s

121

270965 L 562x24W LED SP 221x1256

1 0.031

5.4

43s

209

171543 Barraluce P 1x35-49-80 T5 HF 2MG

1 0.050

4.5

70s

121

270967 L 562x30W LED SP 221x1556

1 0.039

6.6

43s

209

172005 Barraluce P 1x28-54 T5 HF OP IFC 5P

1 0.050

70s

119

172012 Barraluce P 1x35-49-80 T5 HF OP IFC 5P

1 0.050

4.5

70s

119

172019 Barraluce P 1+1x28-54 T5 HF OP IFC 5P

1 0.050

70s

119

172026 Barraluce P 1+1x35-49-80 T5 HF OP IFC 5P

1 0.050

70s

119

172507 Barraluce P 1+1x28-54 T5 HF OP IC 5P

1 0.050

70s

119

172514 Barraluce P 1+1x35-49-80 T5 HF OP IC 5P

1 0.050

70s

119

173423 Barraluce P 1x28-54 T5 HF 2MG IFC 5P

1 0.050

70s

121

173430 Barraluce P 1x35-49-80 T5 HF 2MG IFC 5P

1 0.050

4.5

70s

121

173437 Barraluce P 1+1x28-54 T5 HF 2MG IFC 5P

1 0.050

70s

121

173444 Barraluce P 1+1x35-49-80 T5 HF 2MG IFC 5P

1 0.050

70s

121

173589 Barraluce P 1+1x28-54 T5 HF 2MG IC 5P

1 0.050

70s

121

173590 Barraluce P 1+1x35-49-80 T5 HF 2MG IC 5P

1 0.050

70s

121

260078 L 353x25W LED 3AO 596x596

1 0.030

4.5

32s

185

260080 L 353x25W LED DALI 3AO 596x596

1 0.030

4.5

32s

185

487

Notes

488

Credits The use of text, images, drawings or any other content from this General Catalogue, or their modification or reproduction, in whole or in part, is strictly prohibited without the express authorisation of 3F Filippi S. P.A. Any company or product names or registered trademarks referred to in this publication are the property of their corresponding owners.

Photography Antonio Braga Fabio Lercara Ivan Riccardi Daniele Varesano

Headquarters Via del Savena, 28 Zona Industriale “Piastrella” Pian Di Macina 40065 Pianoro - Bologna - Italy Telephone: +39 051 652 9611 Fax: +39 051 775 884 E-mail: export@3f-filippi.it Web: www.3f-filippi.com

Legend Symbols Overall IP rating

Overall IK rating

IP rating of recessed part IP rating of exposed part

Type of Starter wiring

Glow wire resistance temperature

Certification



Luminaire with low-luminance

Luminaires with electronic wiring and limited surface temperature Protection against electric shock - appliance class Safety Extra-Low Voltage Separated power source (Class III)

Acronyms 1x -> 6x Number of lamps 2M 60° specular louvre 2MG 60° specular louvre, high efficiency 2S 60° semi-specular louvre 2SG 60° semi-specular louvre, high efficiency 2US 60° semi-glossy louvre 3AO Matt silver decorative louvre 3DEC White decorative louvre AB White trim AC Low height AMPIO Wide flow recuperator AR High energy savings AS Asymmetric B White BA Aluminium edge BAT Batwing distribution - dual asymmetric BL Wide edge BS Prominent edge C Compact lamps CD Dual compact lamps CLO Constant light output (see the section "Management of light") COM Commercial specular/white louvre CONC Concentrated flow recuperator CR Fast connection CT Triple compact lamps D Curved diffuser D1-10V Dimmable 1 - 10 volt wiring DA Twin-circuit DALI Dali digital dimmable wiring DE Dual emission DI Direct – indirect light output DR Rectangular diffuser DX Right EEI Energy efficiency index ENP Non-permanent emergency lighting EP Permanent emergency lighting EXT External GER Germicidal GR Grey HCL Human centric lighting (see the section "Management of light") HF Electronic wiring HO High Output HS Hard Skin - high chemical resistant body HST Glass stabilised via heat soak test HT High temperature IC Luminaire to be installed between two IFC products Ice Version suitable for refrigeration cells

IFC Luminaire to start or finish a lighting channel II Class ii IKxx Impact resistance IND Indirect light output INT Internal IPxx Liquid ingress protection L Lenses LA Wide version luminaire LD Lamps supplied LED Light emitting diode LGS Low glaring screen Lxxxx Appliance length xxxx millimetres ME Pomegranate OP Opal P Surface luminaire PC Polycarbonate E Efficiency R90 90% efficiency RFB White steel flow recuperator RFM Semi-polished aluminium flow recuperator RFMG High-efficiency specular aluminium flow recuperator RSP Flow recuperator with prismatic screen RVS Flow recuperator and molded glass Sensor Sensor (refer to the "Management of light") Sensor CF Sensor with corridor function (refer to the "Management of light") SK Low glaring optic SL Flat smooth diffuser in methacrylate SMP Micro-prismatic diffuser SO Pendant luminaire SOP Opal methacrylate screen SP Flat diffuser, prismatic in methacrylate SPA Flat diffuser, prismatic methacrylate, lay-in installation SPM Flat diffuser, prismatic methacrylate, microperforated ST Tight body SX Left T5 Fluorescent lamp, T5 ø16 mm T5-R Circular fluorescent lamp, T5 ø16 mm T8 Fluorescent lamp, T8 ø26 mm UR95 Resistent to relative humidity up to 95% VDT Optic suitable for use in environments with monitor VOP Opal enamelled glass VS Moulded glass VSS Laminated moulded glass VT Transparent glass VTS Transparent laminated glass WW Wall washer distribution

General Catalogue 2016 3F Filippi S.p.A. is constantly striving to improve its products. Therefore, it reserves the right to modify the contents of this publication without prior notice. Check for any updates by visiting our website at www.3f-filippi.com, or contact our Sales Network.

Web: E-mail: Tel.: Fax:

www.3f-filippi.com export@3f-filippi.it +39 051 6529611 +39 051 775884

Head of ce and factory Via del Savena, 28 - Z.I. Piastrella 40065 Pian di Macina - Pianoro (Bologna) - Italy Tax Code. 01033260371 - VAT no. IT00529461204 Share Capital € 3,000,000 fully paid up Bologna Register of Companies no. 01033260371 REA (economic administrative index) No. 234613