Flexographic Mounting Tapes - Bringing life to your prints
ORAFLEX® Cushion Cushion Mounting Tapes
ORAFLEX® Solid Solid Mounting Tapes
Engineered to Perform Better™
ORAFOL Europe GmbH - Experience and Expertise
ORAFOL Europe GmbH is one of the market’s leading manufacturers of bonding solutions for the printing industry. All our products are manufactured using the latest technologies and equipement available, and our research and development department in Germany is continuously working on new and improved bonding solutions to meet market demands. ORAFOL - your experienced and trusted partner.
2
Index Flexographic Mounting Tapes ORAFLEX® is today one of the leading brands in the market of mounting tapes for the flexographic printing industry. This range includes cushion and solid mounting tapes in all relevant thicknesses and hardnesses making high quality flexo printing easier than ever.
Page
List of contents
4 / 5
ORAFLEX® Cushion Mount Tapes
6 / 7
ORAFLEX® Solid Mount Tapes
8
ORAFLEX® Ancillary Products
9
ORAFLEX® Cushion Tape Guide
10 / 11
Application Guidelines
With the ORAFLEX® Cushion tapes, you can stay assured that your printing plates will stay where they are, and not lift.
Engineered to Perform Better™ - www.orafol.com
3
ORAFLEX速 Cushion Mount Tapes
ORAFLEX速 Cushion With the ORAFLEX速 Cushion Tapes, consistent high quality is ensured for your entire print run. The tapes are available in two different thicknesses and three hardnesses, and designed to give good tolerance on pressure settings so that the optimal impression can be set very quickly. Now also available with two adhesive options; Standard and High Performance (HP+). With the ORAFLEX速 Cushion tapes, the plate is effectively protected from distortion factors, providing a great print result. Also issues such as bouncing stripes caused by press vibration at high speeds are avoided.
ORAFLEX® Cushion Mount Tapes
Product Characteristics STANDARD: ORAFLEX® Cushion SOFT CUSHION
MEDIUM CUSHION
HARD CUSHION
ORAFLEX® 11392 380 micron / 15 mil
ORAFLEX® 11393 380 micron / 15 mil
ORAFLEX® 11394 380 micron / 15 mil
ORAFLEX® 11402 500 micron / 20 mil
ORAFLEX® 11403 500 micron / 20 mil
ORAFLEX® 11404 500 micron / 20 mil
Thickness Category
Interlayer colour
Typical relationship between screen and solids
60 % screen 40 % solids
80 % screen 20 % solids
10 % screen 90 % solids
Backing
Reinforced PE foam, closed cell
Reinforced PE foam, closed cell
Reinforced PE foam, closed cell
Adhesive, standard
Acrylic
Acrylic
Acrylic
Liner
PP filmic, white, embossed
PP filmic, white, embossed
PP filmic, white, embossed
Roll sizes
260 mm x 25 m, 457 mm x 25 m, 610 mm x 25 m, 900 mm x 25 m, 1380 mm x 25 m
Tested by
Higher Adhesio n
HIGH PERFORMANCE: ORAFLEX® Cushion HP+ SOFT CUSHION
MEDIUM CUSHION
HARD CUSHION
ORAFLEX® 11392 HP+ 380 micron / 15 mil
ORAFLEX® 11393 HP+ 380 micron / 15 mil
ORAFLEX® 11394 HP+ 380 micron / 15 mil
ORAFLEX® 11402 HP+ 500 micron / 20 mil
ORAFLEX® 11403 HP+ 500 micron / 20 mil
ORAFLEX® 11404 HP+ 500 micron / 20 mil
Thickness Category
Interlayer colour
Typical relationship between screen and solids
80 % screen 20 % solids
60 % screen 40 % solids
10 % screen 90 % solids
Backing
Reinforced PE foam, closed cell
Adhesive, High Performance
Acrylic HP+ adhesive. Designed with higher adhesion levels to avoid lifting when mounting of stiff or thick photopolymer plates and for small diameter sleeves or printing cylinders.
Liner
PP filmic, white, embossed
Roll sizes
260 mm x 25 m, 457 mm x 25 m, 610 mm x 25 m, 900 mm x 25 m, 1380 mm x 25 m
Reinforced PE foam, closed cell
PP filmic, white, embossed
Reinforced PE foam, closed cell
PP filmic, white, embossed
Tested by
Engineered to Perform Better™ - www.orafol.com
5
ORAFLEX® Solid Mount Tapes
ORAFLEX® Solid The ORAFLEX® Solid tapes are a range of double-sided hard tapes for photopolymer or rubber plate mounting on compressible sleeves, print cylinders or mounting films for flexography, letterpress and label printing, suitable for pre-press mounting on films. ORAFLEX® Solid products are designed with balanced adhesion levels to give good plate security while allowing distortion-free repositioning and demounting. The adhesives are designed to remove clearly and without residues from sleeves and steel cylinders after use.
6
Engineered to Perform Better™ - www.orafol.com
ORAFLEX® Solid Mount Tapes
Product Characteristics STANDARD: ORAFLEX® Solid ORAFLEX® 11395
ORAFLEX® 11396
ORAFLEX® 11397
100 micron / 4 mil
200 micron / 8 mil
300 micron / 12 mil
Adhesive
Natural rubber
Natural rubber
Natural rubber
Liner
PP filmic Brown Creped
PP filmic White Creped
PP filmic Green Creped
Carrier
PP film transparent
PP film transparent
PP film transparent
Roll sizes
310 mm x 25 m, 620 mm x 25 m, 900 mm x 25 m, 1200 mm x 25 m, 1240 mm x 25 m
Thickness Category Liner colour
Tested by
Solid mount features: ∙ Improved printing quality through a secure bond between the plate and the tape, as well as steel cylinder or sleeve ∙ Easy and clean removal from the plate, resistance to chemicals and solvents, and will not damage the plate ∙ Easy repositioning and great conformability to the cylinder or sleeve
Engineered to Perform Better™ - www.orafol.com
7
ORAFLEX® Ancillary Products
ORAFLEX® Ancillary Products The ORAFLEX® range consists of all the tapes you need to optimise your flexographic printing process, so also an edge sealing tape as well as an ideal fixing tape for fitting of rubber clichés on metal cylinders and pre-press mounting of polymer clichés on films.
ORAFLEX® 1142 ORAFLEX® 1142 Thickness
310 micron / 12 mil
Carrier
Rayon
Adhesive
Modified dispersion acrylate
Roll sizes
1000 mm x 50 m
ORAFLEX® 11405 Edge Sealing Tape ORAFLEX® 11405 Tape thickness
60 micron
Carrier
Hard PVC film, blue
Adhesive
Natural rubber
Roll sizes
25 mm x 66 m
ORAFLEX® 1142
8
Engineered to Perform Better™ - www.orafol.com
ORAFLEX® 11405
ORAFLEX® Cushion Tape Guide
Select the right foam hardness for your print project With the ORAFLEX® Cushion Tapes you have the choice between different three degrees of foam hardnesses. Your choice would depend on the print job. The ORAFLEX® range offers a soft pink foam tape for the best results in demanding and process printing. For solid print types the blue ORAFLEX® Cushion Tapes are recommended; these are harder and ensure a better ink transfer. In addition the range includes also the white version of medium hard tapes, ideal for combinations of halftone and solid print. The two different levels of adhesion on the plate side – Standard and HP+ - ensure you the right products for all types of plates.
Comparison between different foam hardnesses from Soft to Hard
Foam
Desired print image
Soft
Screens, process work, half tones, and minimising dot gain.
Medium
Combination of solids, line work, screens. Giving good control of dot gain and solid density.
Hard
Solids, lines, large fonts (no pinholing). Optimal ink transfer.
Engineered to Perform Better™ - www.orafol.com
9
How to apply
Application instructions The self-adhesive ORAFLEX® films from ORAFOL are supplied in rolls. Always store them either suspended (with end caps) or standing on end on the roll blocks. Never store them lying down (without end caps). Store and process the materials in cool, dry environments. Specifically, a relative air humidity between 40% and 50% and a temperature between +18° to +22° C (64° to 72° F) should be ensured. Direct sunlight, storage beside radiators etc. should be avoided at all times. Please refer to the individual storage instructions listed in the technical data sheet for each type of material. For specific application temperatures for the materials, please refer to the data sheet for your specific product. The optimum surface temperature ranges between +15° to 25° C (59° to 77° F). Clean and dry surfaces of cylinder and plates are very important for a proper tape performance during print (eg. plate lifting) and demounting (e.g. adhesive residues). Clean the print plate. Make sure it is completely free from dust and other contaminations (e.g. ink or adhesive residues). Cleaning can happen with a suitable solvent and a lint-free cloth. Recommended solvent to use is isopropyl alcohol. Solvents like ethyl acetate should be avoided and can strongly affect adhesive performance. Ensure the surface is totally dried before mounting.
1.
Clean the print cylinder per manufacturer recommendations and wipe dry with clean lint-free cloth. Make sure it is completely free from dust and other contaminations (e.g. ink or adhesive residues). Recommended solvent to use is isopropyl alcohol. Solvents like ethyl acetate should be avoided and can strongly affect adhesive performance. Ensure the surface is totally dried before mounting.
2.
To avoid tensions in the adhesive bond the ORAFLEX® tape should be applied onto the printing cylinder / sleeve first. To avoid air entrapments apply the ORAFLEX® tape in a sweeping motion line by line on the printing cylinder. For best results use a squeegee or rubber roller.
3.
Pull down the liner and remove it from the ORAFLEX® tape without touching the adhesive.
4.
10
Engineered to Perform Better™ - www.orafol.com
How to apply
The print plate should be applied immediately after liner removal as dust might deactivate the open adhesive layer. Only fix the plate without pressure on a narrow area of the ORAFLEX® tape. Once the correct plate orientation is justified begin to apply the plate on the ORAFLEX® tape by using a rubber roller in a sweeping motion line by line.
5.
Particular care is required when pushing the ORAFLEX® tape into contact with the plate edges to avoid edge lifting especially on the leading and trailing edge.
6.
ORAFLEX® 11405 Edge Sealing tape can additionally be used to seal the plate edges on printing cylinders / sleeves with small diameter. Overlapping tape should be removed to avoid web breaks caused by contact of tape and print substrate.
7.
(Optional)
For demounting: remove plate first. To avoid stretching of the plate the peel angle should be flat. Loosen the edges of the print plate and pull it downwards, detaching it from the adhesive side of the ORAFLEX® tape.
8.
Pull back the ORAFLEX® cushion tape from the cylinder and remove it. The printing cylinder / sleeve and plate should be cleaned before the next use.
9.
Engineered to Perform Better™ - www.orafol.com
11
ORAFOL Europe GmbH Orafolstraße 2, D-16515 Oranienburg, Germany Tel: +49 (0)3301 864-0 · Fax: +49 (0)3301 864-100 adhesive.tapes@orafol.de · www.orafol.com
© 2016, ORAFOL Europe GmbH. ORAFLEX® is a registered trademark of ORAFOL Europe GmbH. - 48201-106 (09/2016)
Flexographic Mounting Tapes Engineered to Perform Better™