AUGERS & ACCESSORIES
WE ARE ICE FISHING. Sure. Maybe it looks pretty much the same as you gaze out over the flat surface, the waves all frozen in time. The snow looks kinda like waves if you think about it, but right now you’re picturing what’s under it all. You don’t even have to close your eyes any more to see the edges of the weed flat that always holds good fish, assuming the weeds are still a bit green and standing up. Have to check for that right away. And over to the south there’s that big hump at the entrance to the bay. That usually holds fish in the middle of the winter, and it’s midwinter right now. Gotta check that out, too. So many contour lines. So many waypoints. We’ll be having fish tonight.
DRILLS THROUGH OVER 700" OF ICE ON ONE FULLY CHARGED BATTERY! RESULTS WILL VARY BASED ON CORDLESS DRILL USED
ICE AUGER CONVERSION KIT
ITEM #9578 KIT INCLUDES: Auger drill plate/bracket (#9497) Six-inch auger bit with tempered steel blades Includes handle—also works as a hand auger Steel flighting Weight: 11 lbs. (with tested drill: 14 lbs.) Anodized aluminum frame/handle/plate Includes all hardware to mount drill (drill not included) Lightweight and portable Tested drilling through over 700 inches of ice, using 18 volt drill Works with most current 18 volt cordless drills Results will vary based on cordless drill used
LIGHTWEIGHT & PORTABLE
DRILL WITH ½" CHUCK REQUIRED
Watch Auger in Action! DRILL NOT INCLUDED
NO HASSLE, NO-WORRY SETUP NO LOOSE AUGER BIT FALLING OUT OF THE DRILL
UNIQUE, INNOVATIVE DESIGN Enables the user to simply remove the “chuck” from the drill and attach the auger bit—similar to a power auger.
RUBBER DIPPED HANDLES
ALSO AVAILABLE SEPARATELY: Auger Drill Plate (#9497) CLAM™ 6" Hand Auger (#9498)
ADDITIONAL ACCESSORIES: INDUSTRIAL BALL BEARING Absorbs load from the auger so the drill is only used to spin the auger —not to support the auger torque— which greatly extends the life of the drill.
SUPER-SHARP THREE BLADE CUTTING SYSTEM (Included in #9578 Kit only)
EASY-PULL RUBBER DIPPED TRIGGER
16" EXTENSION ADJUSTABLE FROM 6" TO 16" (#9561)
6" REPLACEMENT BLADES (#9539)
WE RECOMMEND USING A HIGH TORQUE 18 VOLT LITHIUM BATTERY POWERED DRILL 64
AUGERS & ACCESSORIES
CLAMOUTDOORS.COM
CLAMOUTDOORS.COM
AUGERS & ACCESSORIES
65
ACCESSORIES EDGE POWER AUGER ™
CLAM’s Edge™ augers are truly cutting edge. The finest, German-made, high-torque engine. Aluminum transmission case. Powdered metal gears. In 8- and 10-inch models. The CLAM name means Warrior Tough, and we produce an auger deserving of that reputation.
POWERHEAD COVER (#9820)
Super-tough 600 Denier fabric Great for transporting auger Easy-to-use, heavy-duty zippered opening Zippered and Velcro closure under power head Fits most auger power heads
GERMAN ENGINEERED 2.5 HP ENGINE Hi-alloy aluminum transmission case Oil impregnated bushings Powdered metal gearing
CLAM 7-POINT SPEAR ™
COLD SNAP AUGER COVER
(#9824)
Solid steel Tempered steel points Oak wood handle and guard Includes 12-ft. nylon rope, attached Length: 62" 8" spearhead with 7 barbed points
POWER HEAD: ENGINE SPECS: 42 cc, 2.5 HP, 2 cycle engine FUEL CAPACITY: .7 liters, approx. .2 gal. with integrated fuel pump and easy-start primer system TRANSMISSION SPECS: 40:1 gear ratio, hi-alloy aluminium die cast housing, powder-coated finish for durability GEARS: Copper impregnated, powdered metal heat treated gearing
AUGER BITS (8 & 10 INCH):
FLIGHTING: Hi-alloy carbon steel AUGER SHAFT: Hi-alloy carbon steel thick wall tubing welded in compliance with AWS D1.1 (ASTM welding standards) TWIN SERRATED SS BLADES: stainless steel— heat treated to retain a knife-like cutting/ shaving edge required for this specific application (serrations stop ice buildup on blade/auger surfaces)
DIMENSIONS: 8-INCH: 26.75 LBS., 34.5" overall length (#9618) 10-INCH: 30 lbs., 34.5" overall length (#9619)
66
AUGERS & ACCESSORIES
CLAMOUTDOORS.COM
Patented cold snap blade protector installs in a “snap” Protects auger for transportation in less than three seconds Attach blade cover to auger without removing your gloves! Protects both you and your blades 6" cover (#9760) • 8" cover (#9653) • 10" cover (#9654)
If it’s convenient to use, you’ll use it. If it’s covered, it’s safe!
AUGER ACCESSORIES:
FLOATING ICE PICKS
(#9579)
Compact and lightweight 5" picks feature sturdy handle for optimum grip 30" nylon cord connects picks Can be easily carried in any accessible pocket
12" EXTENSION (#9623)
20" EXTENSION
EMERGENCY THROW ROPE
(#9558)
Includes 50 feet of rope Easy to use & accessible Hi-vis orange Bag constructed of UV resistant 600 Denier fabric Integrated strap for attaching to ATV/snowmobile Works great in a boat as well! Overall dimensions: 16.5" L x 7.25" W x 4" H Weight: 1.1 lbs.
(#9624)
8" REPLACEMENT BLADES (#9621) 10" REPLACEMENT BLADES (#9622)
CLAMOUTDOORS.COM
AUGERS & ACCESSORIES
67
ACCESSORIES CORNER CONSOLE
4-POSITION ROD HOLDER
(#9708)
Size: 11" x 11" Molded beverage and accessory locations Works with most sled style fish houses Includes hardware to mount to tub Made of high-density polyethylene
Dimensions: 16.5" L x 5" H x 2.75" D Weight: 1-½ lbs. Strong polypropylene construction Lock reels in a center-oriented position, or flip holder over to enable reels to spin 180 degrees Riveted pieces allow rod/reel combos to be stored vertically or at an angle
PACKABLE, PORTABLE SNOW SHOVEL (#8499)
All-metal, push-button collapsible handle 8.5" x 11" scoop shovel head 25.5" collapsed length 32" extended length
(#9556)
SHOWN COLLAPSED
EMERGENCY TOOL KIT (#9222)
For use on all Fish Trap® models All in one kit to make adjustments while afield on the ice Includes rubber handled 10" Phillips head screwdriver and dual-sided wrench (7/16" & 3/8" in size)
Two-point pulling harness Multiple uses—ice fishing, hunting and family recreation Padded shoulder straps with pockets Great for early/late ice and ice fishing derbies
68
ACCESSORIES
SMALL: (#9175) 30" X 5" LARGE: (#9176) 45" X 10"
(#9183)
Solid steel parts with PVC dipped forks for protection Includes all mounting hardware Universal ATV mount Three-point system
CLAMOUTDOORS.COM
Deluxe Travel Cover (gray) (#9741) : X2™, X4™
QUICK-PACK TABLES
(#9750)
Ultra light folding tables with cup holders Super-strong powder steel legs and frame construction Great for fishing, camping or a day at the beach Waterproof and mildew resistant 600 Denier polyester table top fabric ROUND TABLE (#9181): 27.5" L x 27.5" W x 24.5" H, 6 LBS. SQUARE TABLE (#9180): 18" L x 18" W x 18" H, 4 LBS.
(#8348)
Use for drilling ice anchors into ice Attaches to cordless drill Works great for securing pop-up portable shelters to the ice
Organizes and protects your gear Two sizes— works with any sled style or permanent ice shelter Includes all mounting hardware
Leak-proof bait well with sled mounting bracket Handy bait well for use in ice shelter Mounting bracket works on all CLAM Fish Trap® shelters and most competitive brands Leak-proof .6 gallon bucket great for transporting bait No more spilled minnow buckets in the back of the vehicle or in the shelter sled Screw top with gasket for water-tight seal
ICE ANCHOR INSTALLATION TOOL
(#8427)
(#9024)
Travel Cover (#8760) : Scout,™ Trapper™ Travel Cover (#8820) : Pro,™ Legend Thermal,™ Travel Cover (#8792) : Guide,™ Nanook,™ Kenai™ Travel Cover (#8073) : Yukon,™ Runner Thermal,™ Kodiak,™ Denali™ Travel Cover (#8831) : Voyager,™ Adventure,™ Tundra,™ Thermal X™ Travel Cover (#9568) : X1 Thermal™
(#9555)
Need a few more anchors? Lose one down a hole? Pick up a 3-pack for additional stability or for backups. Three self-tapping ice anchors Works with any hub style shelter with tie downs or grommets for securing to ice
CARGO NETS
BAIT WELL
TRAVEL COVERS
Dimensions: 9" L x 1.75" W x 3" D (with bucket bracket) Weight: ½ lb. Strong polypropylene and steel construction Works great on a bucket, or remove the bucket bracket and affix directly to your shelter base Lock reel in a center-oriented position, or flip holder over to enable reel to spin 180 degrees vertically or at an angle
3-PIECE ICE ANCHOR KIT
SLED PULLING HARNESS
AUGER BRACKET
SINGLE ROD HOLDER
Ice Anchor Kit
(#8064)
Works with any sled style fish house Includes: two self-tapping spikes, two nylon straps and two mounting hardware sets
SHELTER HANG HOOKS (#8824)
Designed to attach to the rear pole of all flip style shelters Great for keeping gear off the ice Two hooks per pack
(#8241)
Heavy-duty, spring-loaded hitch is mounted to sled Attached to flipper/pin receiver on snowmobile or ATV
RUNNER KITS Designed to increase the life of your sled by protecting the bottom from rigors of pulling across ice with ATV or snowmobile. Easy to install. Runner Kit (#8995) : Scout,™ Pro,™ Trapper,™ Nanook,™ Guide,™ Legend™ Runner Kit (#8996) : Yukon,™ Voyager,™ Thermal X,™ Adventure,™ Tundra™ Runner Kit (#8997): Kenai,™ Denali,™ Kodiak,™ Warrior,™ X1,™ Scout XL,™ Legend XL™ Runner Kit (#8247) : X2,™ X4™
UNIVERSAL TOW HITCH
HUB SHELTER COAT HOOKS 4-PACK (#9174)
Universal coat hooks that slide into the ceiling corner pockets of all hub shelters Easy to store-just keep them with your hub shelter ice anchors Made of zinc-coated steel
CLAMOUTDOORS.COM
FLOOR MAT
(#9225)
Keeps your feet away from the snow and ice, plus those with permanent shacks can stop the elements at the door Size: 20" x 27" Rubber bottom with nylon waterproof material on top
ACCESSORIES
69
ACCESSORIES
ICE ROD SLICK Easy push-on, push-off application Tangle-free removal from rod lockers Protects line, guides and rod Durable polyethylene monofilament and non-absorbent breathable mesh
SINGLE & DOUBLE-SIDED
ICE ROD SLICK ™ BLUE 2-PACK (#8248) ICE ROD SLICK ™ PINK 2-PACK (#8836) ICE ROD SLICK ™ BLACK 2-PACK (#8837)
ROD LOCKERS Interior Velcro straps hold rod/reel combos securely Heavy-duty 600 Denier fabric exterior Four large, zippered pockets for accessories Heavy-duty, adjustable, padded shoulder strap Rigid framing for support and protection
Fits up to 16 rod/reel combos Dimensions: 38" L x 10" H x 10.5" W Weight: 13 lbs.
Fits up to 8 rod/reel combos Dimensions: 38" L x 10" H x 8.5" W Weight: 9.5 lbs.
ROD LOCKER
(#8832)
ROD TUBE SHOWN IN USE
CLAM CHAIR
(#9825)
DELUXE FLASHER BAG
ROD TUBE
Durable 600 Denier outer shell Protects your rods Innovative interior lining that prevents hooks from catching Large enough to hold six ice combos Velcro inserts to hold combos in place
CLEAR ROD TUBE
PVC Clear rod tube Length 32" Easy to customize the length to your rods Easy to identify your rod/reel Prevents tangled lines Easy-on, easy-off installation Protects tips and guides from damage Great for rod lockers and storing rods in garage Lightweight and flexible
SINGLE-SIDED ROD LOCKER (#9551)
Two 6" x 8" gusseted and zippered pockets for tackle and tools Padded reel sleeve protects reels in storage Removable shoulder strap Two Velcro straps to hang rod tube from canopy pole inside trap-style shelter
(#8823)
™ (#8243)
Shoulder slung soft pack with rigid interior framework to protect rod and reel combos Comfortable padded seat with backrest and fish bag Folding chair that converts to a gear bag and rod storage Two long accessory compartments, big enough for your tip ups Stores and protects six rod/reel combos Weight: 12 lbs.
(#9749)
Heavy-duty 600 Denier nylon shell Hard plastic bottom Four total pockets Internal straps to securely keep your flasher in place Zippered PVC viewing window Padded shoulder strap
TRIPOD FOLDING CHAIR
(#9577)
Ultra-light folding chair with padded backrest Super-strong powder coated steel frame Heavy-duty reinforced 600 Denier fabric Carry bag included Great for ice fishing, camping, or use in hunting blind Seat size: 16.5" W x 16.5" D x 20" T Folded size: 4" x 4" x 29" Weight: 6 lbs. (with carry bag)
ROD TUBE 3.0 (#9553) - EASILY FITS UP TO 30" RODS Length 32" • Weight: 1.75 lbs. • 2-¼" Diameter Tube ROD TUBE 4.0 (#9554) - EASILY FITS UP TO 40" RODS Length 42" • Weight: 2.25 lbs. • 2-¼" Diameter Tube
INSULATED LUNCH BAG WITH VACUUM BOTTLE
COOLER CHAIR
Steel tube frame Weatherproof polyester seat—16" seat height Fold-up design for easy carrying and transporting Built-in cooler/storage compartment
DOUBLE-SIDED ROD LOCKER (#9552)
ROD TUBE 4.0 SHOWN HERE
™
(#9177)
Four sealed food storage compartments Stainless steel vacuum bottle (25 oz. capacity) Carry handle and shoulder strap
70
ACCESSORIES
CLAMOUTDOORS.COM
CLAMOUTDOORS.COM
ACCESSORIES
71
ACCESSORIES SOFT PLASTICS HOLDER
DUAL COMPARTMENT SOFT-SIDED TACKLE BAG (#9746)
Durable 600 Denier outer shell Five zippered pockets Includes 5.25" x 7.25" clear tackle box Includes a two-ring binder with 10 PVC sheets — two pockets per sheet Carry handle Lightweight, easy to use and store
2 GALLON (#9043) • 1.25 GALLON (#9044) • .6 GALLON (#9045)
CLAM BAIT CANS (#9745)
(#9238)
Screw top lid Perfect compact bait container Fits in most pockets Great for any type of bait for general storage of smaller ice fishing gear Collect all four
LARGE JIG BOX
DUAL-TRAY JIG BOXES
SMALL JIG BOX
(#8426)
Lightweight individual pre-cut jig slots Easy one-touch compartments for small plastics Waterproof silicone seal
(#8814)
Two-sided jig box with 146 individual pre-cut jig slots Clear sides for easy identification of tackle Waterproof silicone seal
Lightweight and water tight Tough ABS plastic outer case Durable polyethylene frames inside
ACCESSORIES
No more spilled minnow buckets in the back of a vehicle or shelter shed Insulated carry bag for all temperature protection Bucket does not have handle—it's designed to be carried by the adjustable shoulder strap/carry handle on the insulated carry case Screw-top with gasket for water-tight seal
Durable 600 Denier outer shell Includes 10 pages, one sealable pocket per page Lightweight and portable Fits in your pocket!
Durable 600 Denier outer shell Includes one mesh pocket with tackle box Includes binder of five PVC sealable bags Small and portable Perfect pocket-size organizer
72
(#8840)
The remarkable Arctic Warrior™ tips down when a fish tugs and the flag goes up. Grab the rod and reel, set the hook and fight the fish. No hand-over-hand and no frozen fingers.
SPILL-PROOF BAIT KEEPERS
(#9747)
Durable 600 Denier outer shell Two-ring binder Includes 10 PVC sheets Four pockets per sheet Pocket dimensions 3" x 3.75"
MEDIUM (#9178) 16 INDIVIDUAL TRAYS
™
SOFT PLASTICS WALLET
(#9744)
SMALL SOFT-SIDED TACKLE ORGANIZER
ARCTIC WARRIOR TIP-UP
MEDIUM JIG BOX
(#8813)
Two-sided jig box with 250 individual pre-cut jig slots Clear sides for easy identification of tackle Waterproof silicone seal
LARGE (#9179) 24 INDIVIDUAL TRAYS
CLAMOUTDOORS.COM
CLAMOUTDOORS.COM
ACCESSORIES
73
LIGHTS & POWER
LED RECHARGEABLE TUBE LIGHT (#8430)
Great for any size fishing shelter Up to 3 hours when fully charged AC/DC use or connect direct to battery with alligator clips Two Velcro straps for attachment
LIGHT STICKS
LARGE FAN/LIGHT
(#8429)
Circulates air for complete comfort Perfect for all size fish houses 18 LED light bulb illumination Super-quiet fan has two speeds Can be hung from shelter or set on table Uses 2 D batteries (not included) Built-in 12 volt jack/adapter with DC connector/cord included)
INDUSTRY FIRST!
Hands-free, out of the way bright lights 24 inches long 8 LED light bulbs 560 lumen output Also includes: Mounting hardware and drill bit 12 feet of wire with alligator clip connections
LARGE LIGHT STICK (#9560)
SMALL FAN/LIGHT
SMALL LIGHT STICK (#9559)
AVAILABLE IN 2 SIZES LARGE—MOUNT INTO 1-1⁄4 " POLES (#9560) SHOWN IN USE, RIGHT SMALL—MOUNT INTO 7/8" POLES OR ATTACHED BY “S” CLIPS (INCLUDED) (#9559) “S” CLIPS COMPATIBLE WITH 7/8", 1⁄2 " AND 1-1⁄4 " POLES SHOWN IN USE, BELOW
SLED LIGHTS
Three super bright LED lights for on-ice illumination Waterproof Complete hardware kit for mounting Includes wire and alligator clips for battery connection Great for portable and permanent fish houses 3-PACK, 6 BULB (9034) • 3-PACK, 12 BULB (9214)
Great for use in any fish house, as a work light or any situation where added light is needed Small in size, big in brightness Both feature 24 LED bulbs providing efficient bright white light Small light also has 3 LED end light Magnetic back, Velcro strap and built in hook for attachment Small uses 2 AAA batteries, not included Large uses 3 AA batteries, not included
LUCKY LIGHT
(#8497)
Super-bright LED lights will penetrate the thickest ice Top-mounted light illuminates bobber for easy bite detection Uses 3 AA batteries (not included) Remote power adaptor plug included
TORCH LIGHT
Comes with Velcro, magnet or pothook for attachment Lifespan for LED lights is up to 100,000 hours Circulates air for complete comfort Quiet, lightweight design Requires 4 AA batteries (not included) Built-in 12 volt jack/adapter
BATTERY BRACKET
(#8829)
Easily attaches to inside of ice fishing shelter sled Designed to hold 7, 8, or 9 amp 12 volt flasher batteries Ideal for extra battery to power lights, fans, etc. Velcro strap to secure battery in place Hardware included for installation
POCKET LIGHTS
SMALL SOLD INDIVIDUALLY (#9035) SMALL & LARGE SOLD TOGETHER (#9036)
(#8428)
BATTERY BAG WITH CHARGER AND BRACKET
(#8828)
One of the challenges for ice anglers everywhere, is how to power all of their electronics (lights, fans, flashers, cell phones and more). CLAM’s power pack provides anglers with some great options. Battery bag fits 7, 8 or 9 amp 12 volt batteries.
(#9185)
A LED headlamp that not only attaches to your head, but can be used as a flashlight or clip to your parka. A true 3-in-1 system. Special “periscope” design allows hands-free, forward-light projection 4 lighting modes—high, low, quick flashing and SOS flashing Great for ice fishing, hunting and open water fishing Water resistant Batteries included 85 Lumen Output
74
ACCESSORIES
CLAMOUTDOORS.COM
CLAMOUTDOORS.COM
ACCESSORIES
75