1 minute read
Positioning the Electrodes and the Stimulator on the Belt
The double sticky sides electrodes should be positioned on the belt according to the placement markings outlined on the belt.
Open the pack of electrodes, remove the plastic from the grid pattern side.
Advertisement
Stick the electrodes grid side down in-line with the outlines.
At this point the visible side of the electrodes should be plain black.
We recommend placing the four electrodes, two on the front and two on the back, even if you stimulate only the abs or only the low back.
Make sure that the metallic pins are completely covered by the electrodes.
Only use this device with electrodes recommended by Compex.
Slide the stimulator into the belt holster. Make sure that the connector is well inserted in the stimulator.
