1 minute read
Installing the Saddle
Before you install the saddle, see the topics on posture (Cycling Posture, page 2) and geometry
D(Adjusting the Trainer Geometry, page 3). 1 Open the assembly kit . 2 Use the 6 mm hex key to remove the set screw.
Advertisement
3 Place the cap on the saddle rail .
4 Slide the saddle onto the saddle rail.
5 Adjust the saddle setback, and secure the M12 x 25 handle .
The maximum setback distance is 15 cm.
6 Use the 8 mm hex key to remove the set screw from the saddle post. 7 Adjust the saddle height, and secure the M16 x 22 handle .
The maximum saddle height is 26 cm. 8 If necessary, use the 5 mm hex key to adjust the saddle angle bolt .
