Eurotruss Hauptkatalog 2014 by Flashlight Event- und Mediatechnik AG

Eurotruss Headquarter Castorweg 2 Nl-8938 BE Leeuwarden - The Netherlands Tel: +31-58 - 215 88 88 www.eurotruss.com

• •

Fax: +31-58 - 215 8111 E: info@eurotruss.com

Copyright© 2013-V1/E by Eurotruss BV Without having any written permission from the editor it is not allowed to copy, reproduce or publish any part of this catalogue, neither in printed form nor by photos or electronic media. All technical specifications are subject to change without notification. We do not assume liability for any incorrect information in this catalogue. Eurotruss would like to thank following companies for releasing the pictures used in this catalogue: Media Spectrum GmbH & Co, Winkler, Paradigma, Volumen Canarias, Dubai Artistic Innovation, ATY, Tuchler, Flashlight and many more…

Eurotruss Catalogue Edition 14

Catalogue Trussing Systems Roof Systems Stage decks

INTRODUCTION

02 - 11 03

PRE RIG TRUSS

12 - 21

HEAVY TRUSS

22 - 29

NEW: MT Rectangular Truss

ST Square Truss

24 - 25

14 - 15

FT50 Folding Truss

26 - 27

TT Rectangular Truss

16 - 17

XD Rectangular Truss

28 - 29

· Stages / Approvals

XT Rectangular Truss

18 - 19

· Specialised Constructions / Exhibitions

FT100 Folding Truss

20 - 21

Content EUROTRUSS-EXPERTISE · Company Profile

· Pre Rigging / Roof Range

08 - 11

System Overview

CORNER BLOCKS

58 - 61

NEW: MT, TT, XT, FT100 and FT50 Corner Blocks

ST, XD, HD/FD4x and HD/FD3x Corner Blocks

CIRCLES AND CURVED TRUSSES Circle Parts and Loading

ACCESSORIES Accessories for all systems Rigging Accessories

ROOF SYSTEMS

116 - 145

Introduction Roof systems

118

Roof Overview

119

62 - 65 64 - 65

66 - 77

NEW: AR-20 Super Arc ST Roofs 16(12)x12м 124 - 125 AR-10 Basic Arc HD/FD Roofs 10x8, 8x6, 8x4, 6x4м 126 - 127

STAGE EQUIPMENT 146 - 157

STAGE DECKS

80 - 81

Tower Erecting System

LED Bridge

Sound Towers Overview

NEW: AR-30 Mega Arc TT Roofs 24(20)x15, 16x12м 122 - 123

NEW:

GS Tower Overview

78 - 95

68 - 76

120 - 97

Arc roofs

GROUND SUPPORT TOWERS

158 - 168

Saddle roofs

128 - 133

NEW: SR-50 TT Pro Roofs 24x16, 20x16, 16x12м 130 - 131 NEW: SR-40 ST Pro Roofs 20 (18) x14м, 16 (14) x12м 132 - 133

STAGE DECKS

169 - 179

Stage Equipment Overview

148 - 149

Decks

160 - 161

Stairs

169 - 171

Scaffolding Stage System

150 - 151

Legs

162 - 165

Driveway

172 - 173

Ballast Safe

152 - 153

Handrails

166 - 167

Tribunes

174 - 175

Foldable Ballast Tanks

154 - 155

Trolleys

Accessories

176 - 179

Ballast Solutions

156 - 157

168

Content HD / FD TRUSS

30 - 49

TOUR TRUSS

50 - 57

HD44 / FD44 Square Truss

32 - 33

NEW: CWT - Catwalk Truss

52 - 53

HD43 / FD43 Triangle Truss

34 - 35

HD42 / FD42 Ladder Truss

36 - 37

NEW: RTS - Pre Rig Swing Truss

54 - 55

HD34 / FD34 Square Truss

38 - 41

NEW: PRT - Pre Rig Truss

56 - 57

HD33 / FD33 Triangle Truss Two tubes up

42 - 43

HD33 / FD33 Triangle Truss Two tubes down

44 - 45

HD32 / FD32 Ladder Truss

46 - 47

HD/FD31 Single tube series

48 - 49

FORK END TRUSS SYSTEMS

96 - 115

TD50 Tower

84 - 85

System Overview

TD44 Tower

86 - 87

Maxi Beam Fork Truss

100 - 101

TD35 Tower

88 - 89

Nova Beam Fork Truss

102 - 105

HD/FD34 Tower

90 - 91

GS Fork Truss

106 - 109

Mini Beam Fork Truss

110 - 113

LED-Bridges

Sound Tower ST Sound Tower HD44 Sound Tower HD34 Saddle roofs

Ground Support Tower GS

98 - 99

114

Accessories for Fork End systems 115

134 - 139

Pitch roofs

NEW: SR-30 ST Medium Roofs 14 (12) x10м 134 - 135 NEW: SR-20 HD44 Medium Roofs 14 (12) x10м 136 - 137 NEW: SR-10 HD34 Basic Roofs 10x8м, 8x6м, 8x4м, 6x4м 138 - 139

140 - 145

NEW: PR20 MT Pitch Roof 24x21м, 20x15м, 16x15м 142 - 143 NEW: PR10 TT Pitch Roof 24x15м, 20x15м, 16x12м 144 - 145

EXPERTISE IN TRUSSING There is no doubt, EUROTRUSS, is one of the leading suppliers of aluminium trussing systems on the international market. Great expertise, a high level of quality, efficient and modern production technology and a superb fast connection system are the pillars on which Eurotruss has developed a full comprehensive product range for all purposes. This is even of more importance than ever as with the constant flow of copies the interest in quality, durability and ultimately safety tends to disappear. Rumours like that all brands come from the same factory, all have same approvals, all truss do the same trick result in less attention for the key aspects of truss. You can not jeopardize the rules of rigging and as truss is major tool for hanging your lights, PA and other objects every self respecting truss manufacturer has the duty to present and sell a safe product. It is crucial that any truss user gather all truss information about quality, loading charts, approvals and all there is to know about trussing before purchasing or promotion a certain brand. Truss is made for the professionals. Working in a professional market requires a professional approach.

Company Profile From the past leading to the future

HISTORY In the year 1993 Eurotruss started the production of aluminium truss systems. In 1993 Eurotruss successfully opened the first conical spigot connection which ultimately has proven to be an important innovation in the truss market. After the introduction of this new connection system in 1993 Eurotruss has established a modern production facility in machinery, premises and remained the highest quality level in terms of products as well as high performance of the organization. During the last decade we have established an extensive and well trained dealer network of worldwide dealers. In 2008 Eurotruss opened succesfully a sales office in Dubai, UAE, which handles all sales and deliveries in the Middle East. A well motivated and trained team, a big stock of all popular truss types and a 24/7 mentality is the key to be the right partner for all truss users in the Middle East.

In 2010 Eurotruss aquired the brand Slick which operates independantly and with the access of the expertise of fork connection, Eurotruss extended its product range with 4 types of Fork End Truss Systems and a Ground Support Tower System. In order to cope with the structural growth without compromising the high quality standard we have set, Eurotruss production facilities has expanded to 10.000m2. Eurotruss has always been upfront with the latest technology and quality standards, something that will remain one of the key aspects in the future. As one of the first companies in the industry of truss manufacturing Eurotruss got TuV and later on a SLV/Welding Approval as well as a Building Permit on Roofs and Complex Structures, all according the highest quality specifications set by the respected institutions and authorities. Eurotruss adhere to the highest EU specifications within Aluminium, DNV (Welders Qualification) in order to provide a safe and quality product. Eurotruss is ready to move forward. In order to provide the Eurotruss User the most suitable truss type, highest quality and best support, we have divided the Eurotruss Markets in TOURING, CORPORATE, INSTALLATIONS, THEATRE AND INDUSTRY.

TOURING

CORPORATE

Eurotruss is worldwide one of the well known brands and partners of dry-hire and production rental companies. Unbeatable quality, flexibility, maximum technical & engineering support are the key issues for the rental companies in the Touring Industry.

With the recognition of aluminium truss systems as the perfect modular ÂťframesÂŤ for exhibitions and temporarily corporate installations for marketing purposes, more and more rental companies have grown an expertise in this field.

The demands from promoters, installers and rigging companies are under constant development which need to be followed up by the touring rental companies in order to maintain their position. The lead times between decision and delivery has became more tight and for this the touring rental companies have great interest in aluminium trussing companies who are able to have the flexibility but also the capacity to handle their requirements fast without enhanced cost and stress. Eurotruss has grown along with these companies in this market and simply adapted this short term order processing.

The demands from those rental companies are basically support in design, presentation and engineering as well as harmonization in their product range on stock. Eurotruss has a very strong position as a total supplier in this industry. This has led to a worldwide network of the major corporate rental companies

In the entertainment industry touring rental companies have expanded their work field worldwide by exporting their services, alliances and own offices in the world. The broad dealer network of Eurotruss has became a valuable asset as the leading rental companies require local support just anywhere in the world.

Design and fabrication of custom applications is our speciality. We pride ourselves on quick response for custom projects of any size. Design, Flexibility, Quality and Support at the best possible price are the main characteristics that make Eurotruss the leading manufacturer and supplier in Corporate Industry.

Flexibility, Durability, Quality and Support at the best possible price are the main characteristics that make Eurotruss the leading manufacturer and supplier in Touring Industry.

Exhibition

INSTALLATIONS

THEATRE

Recently more and more permanent and semi temporarily installations are being built with aluminium truss systems.

By referring to theatre we mean all permanent and temporarily set ups for theatre, film and TV.

The demands from those installers are support in design, value engineering in terms of a loadability as well as rigging and installation support. Eurotruss is used to cope with designing and engineering the truss grids suitable for the requested load, given building circumstances and all matching the budget. Design and engineering of installation truss to match requirements and budget is our speciality. We pride ourselves of supplying the biggest truss installation job worldwide using over 22.000m of box truss

The demands from the theatre industry are mainly focused on design, safety, engineering in terms of a loadability as well as integration of fly bars etc. During the years Eurotruss gained a lot of expertise in the theatre, film and tv world cooperation with suppliers of draps, fly bars, tribunes and stages. Eurotruss invested in a wide network of theatre suppliers to become a total supplier and have the capability and expertise to supply complete mobile theatre set ups, tents and structures.

Design, Engineering, Quality and Support matching the budgets are the main characteristics that make Eurotruss the leading manufacturer and supplier in the Installation Industry.

Design, Engineering, Safety and Total Support within the specifications of the architects are the main characteristics that make Eurotruss the leading manufacturer and supplier in the Theatre Industry.

Roof Systems

Markets

TOURING

MT / TT / XT FT100 / FT50 ST XD HD/FD 4X HD/FD 3X Circles Towers PA Towers LED Bridges Customized

x xx x x x x x x x x x

x x x x x x x x x x x

Maxi Beam Nova Beam GS Mini Beam Tower Customized

x x x x x x

CORPORATE INSTALLATION Conical Truss x x x x x x x x x x x x x x x x x x x x x x Fork End Truss x x x x x x x x x x x x

THEATRE

INDUSTRY

x x x x x x x x x x x

x x x x x x

INDUSTRY In the offshore, shipyards, transport and building Industry for several specialist applications aluminium trussing can be a perfect substitution for steel structures. Eurotruss as one of the first have made several customized structures for industrial applications which has been adapted as standard truss apllications for the industrial market. A tested and approved truss fabrication meeting the highest quality requirements is obligatory for the Industry. Eurotruss has all the approvals, expertise, engineering support and service level which enabled us to become the standard in many fields of the Industrial Market. Design, Engineering, Highest Quality and Service are the main characteristics that give Eurotruss a leading position in the Industrial market.

SYSTEM OVERVIEW General Overview of the Eurotruss Conical Truss System

WHICH TRUSS FOR WHICH PURPOSE ?

HD OR FD TRUSS?

This overview categorizes all the various truss series from high load bearing capacity truss to small compact triangle deco truss. Each truss series has its own specifications and purpose.

As HD Truss has the same connection as FD Truss, it could be mixed although the load bearing capacities are different.

In general we list three major Truss Series, Pre Rig Truss, Heavy Truss and HD / FD Truss. Naturally Eurotruss carries a broad range of circles, accessories and towers which you will find in this catalogue.

In order to recognize the HD Truss an extra RING is being milled in the female receiver. * If you mix FD and HD truss than you should always work * with the loading charts of the FD truss.

THE ORIGINAL

TUV APPROVAL Eurotruss Aluminium Truss Series have the TuV Approval (Bau-Art Prufung). All given loading charts are fully approved by the TuV and all truss series are made according the DIN EN 1999-1-1 & 1999 -1-1/A2 within Eurocode 9 specifications.

LABELLING

As labels can be removed Eurotruss has an unique mark to give the users the proof that they work with an original Eurotruss. At the end of the femal receiver a ring with the text ÂťEurotruss Model Protection plus numberÂŤ is engraved. Always check for its original mark and make sure that you only work with an AUTHENTIC Eurotruss.

Each trussing manufacturer should take responsibility for its responsibility and its duty to inform the user about the characteristics of that specific product. Eurotruss has always used labels which contain all the information necessary. Each product range has its own label and can be distinguished by its colour. The label of the Pre Rig Truss Range is gold, of the Heavy Truss black and of the HD/FD Series blue.

PRE RIG TRUSS MT: Up to 60m of span with impressive load bearing capacity. The ultimate Pre Rig Truss made of aluminium standard equipped with castors.

TT: Up to 40m of span with impressive load bearing capacity. The ultimate solution for Pre Rig.

XT:

More than 24m of span required, also good loading and suitable as Pre Rig. XT will be your choice.

FT100:

The truss for a tour! High load bearing capacity and a minimum of space required. Up to spans of 44m with impressive loads.

HEAVY TRUSS ST: Made for big jobs with 50cm FT50: square size. Impressive result.

The truss for the tour! High load bearing capacity and a minimum of space required.

XD:

For professional installers and stand builders this relatively small truss, developed for indoor

use, has an enormous load bearing capacity.

HD / FD TRUSS HD4X: An upgrade of FD4x by using a 3mm wall thickness which results in a higher load bearing capacity and durability.

FD4X:

The big brother of the FD3X with an even higher loading capacity.

HD3X:

An upgrade of the FD3x by using a 3mm wall thickness which results in a higher load bearing capacity and durability.

FD3X: With the FD32 (ladder), FD33 (triangular) and FD34 (square) this system is the most used truss in our programm. Up to middle long spans the solution for exhibition stands and small roofs.

TOWER TRUSS TD50 TOWER TRUSS: TD44 TOWER TRUSS: TD35 TOWER TRUSS: HD/FD34 TOWER TRUSS: The TD50 Tower Truss is the new Tower for MT and TT Main Rigs. The Tower Mast sections are rigid and have additional one side horizontal brace for climbing.

The TD44 Tower Truss is the standard Tower for FT, XT and TT Main Rigs. The TD44 Tower is the HD44 Truss with an additional one side horizontal brace for climbing.

The TD35 Tower Truss is the standard Tower for ST Main Rigs. The TD35 Tower matches with the ST Truss System and has on one side an additional horizontal brace for climbing.

The HD/FD34 Tower Truss is the standard Tower for HD/FD34 and HD/FD44 Main Rigs. The HD/FD34 Tower is the standard HD/FD34 Truss.

SYSTEM OVERVIEW Overview of the Pre Rig and Heavy Truss Systems

PRE RIG TRUSS HEAVY TRUSS The Pre Rig and Heavy truss systems are capable of bearing high loads on long free spans.

The truss series are made according the TuV specifications and made with the fast connection system.

TT-Truss

Height: Width: Weight: Main tube: Braces: Material: Connection:

1010mm 580mm ~25 kg/m 60 x 5mm 50 x 3mm / 30 x 3mm EN AW-6082 T6 CS3-CON

ST-Truss

Height: Width: Weight: Main tube: Braces: Material: Connection:

510mm 510mm ~13,5kg/m 50 x 4mm 30 x 3mm EN AW-6082 T6 CS3-CON

MT-Truss

The dimensions, used material and strong connection offers the optimal product for various purposes like big indoor- and outdoor spans, ground supports and roof systems.

Height: Width: Weight: Main tube: Braces: Material: Connection:

XT-Truss:

810mm 580mm ~20 kg/m 50 x 4mm 30 (40 / 50) x 3mm EN AW-6082 T6 CS3-CON

FT50-Truss

531mm 580mm ~13,5kg/m 50 x 4mm 25 x 3mm EN AW-6082 T6 CS3-CON

1180mm 780mm ~60 kg/m 120 x 5mm 60 (50) x 4mm EN AW-6082 T6 CS4-CON

FT100-Truss:

986mm 580mm ~22 kg/m 60 x 5mm 50 x 3mm EN AW-6082 T6 CS3-CON

XD-Truss:

400mm 290mm ~9kg/m 50 x 3mm 25 x 3mm EN AW-6082 T6 CS2-CON

SYSTEM OVERVIEW Overview of the HD/FD4x and HD/FD3x Truss Systems

HD / FD 4X-SERIES

HD / FD 3X-SERIES

The 40-er Truss Systems are capable of bearing medium duty loads on free spans up to 18m.

These Truss Systems are capable of bearing medium duty loads on free spans up to 16m.

The dimensions, materials used and strong connections offer the optimal product for various purposes like indooror outdoor spans and ground supports.

The dimensions, materials used and strong connections offer the optimal product for various purposes like exhibition stands, installations, ground supports and small roof systems.

The truss series are made according the TuV specifications and made with the fast connection system.

HD/FD44-Truss

Height: Width: Weight: Main tube: Braces: Material: Connection:

400mm 400mm ~9,5 / ~7,5kg/m 50 x 3 (2mm) 25 x 2mm EN AW-6082 T6 CS1-CON

HD/FD34-Truss

Height: Width: Weight: Main tube: Braces: Material: Connection:

290mm 290mm ~7,5 / ~6kg/m 50 x 3mm (2mm) 20 x 2mm EN AW-6082 T6 CS1-CON

The truss series are made according the TuV specifications and made with the fast connection system.

HD/FD43-Truss

353mm 400mm ~5,9 / ~5,1kg/m 50 x 3 (2mm) 25 x 2mm EN AW-6082 T6 CS1-CON

HD/FD33-Truss

258mm 290mm ~5,5 / ~4,5kg/m 50 x 3mm (2mm) 20 x 2mm EN AW-6082 T6 CS1-CON

HD/FD42-Truss

400mm 50mm ~4,5 / ~3,5kg/m 50 x 3 (2mm) 25 x 2mm EN AW-6082 T6 CS1-CON

HD/FD32-Truss:

290mm 50mm ~4 / ~3kg/m 50 x 3mm (2mm) 20 x 2mm EN AW-6082 T6 CS1-CON

SYSTEM OVERVIEW Overview of the Tower Truss Systems TOWER TRUSS TD50 TOWER TRUSS: TD44 TOWER TRUSS: TD35 TOWER TRUSS: HD/FD34 TOWER TRUSS: The TD50 Tower Truss is standard mast section for the towers in a MT and TT Ground Support and Roof Systems.

The TD44 Tower Truss is the standard mast section for the towers in a FT, XT and TT Ground Support and Roof Systems.

The TD35 Tower Truss is the standard mast section for the towers in a ST Ground Support and Roof Systems.

The HD / FD34 Tower Truss is the standard mast section for the towers in a HD / FD34, HD / FD44 and XD Ground Support and also in the 14(12)x10m Saddle Roof Systems.

The TD50 Tower facts: max 20m height with 8000 kg load capacity.

The TD44 Tower facts: max 16m height with 2000 kg load capacity.

The TD35 Tower facts: max 14m height with 2000 kg load capacity.

The HD / FD34 Tower facts: max 12m height with 1000 kg load capacity. The straight elements of the HD/FD34 Tower consist of standard HD/FD34 Straight Truss elements allowing a variety of combinations.

Height: Width: Weight: Main tube: Braces: Material: Connection: Suitable for:

TD50-Truss

TD44-Truss

510mm 510mm ~16,5kg/m 60 x 5mm 30 x 3mm EN AW-6082 T6 CS3-CON MT, TT

400mm 400mm ~9,5kg/m 50 x 3mm 25 x 2mm EN AW-6082 T6 CS1-CON TT, XT, FT

TD35-Truss

350mm 350mm ~8,5kg/m 50 x 3mm 25x2mm / 30x3mm EN AW-6082 T6 CS1-CON ST

HD/FD34TowerTruss

Height: Width: Weight: Main tube: Braces: Material: Connection: Suitable for:

290mm 290mm ~7,5 / ~6kg/m 50 x 3mm (2mm) 20 x 2mm EN AW-6082 T6 CS1-CON XD GS, HD/FD44+34

Pre Rig Truss MT Truss TT Truss XT Truss FT100 Folding Truss

MT Rectangular Truss Pre Rig Truss for gigantic loads and long spans

Dimensions MT

The ultimate Pre Rig Truss for spans up to 60m

MT RECTANGULAR TRUSS The MT Truss lends itself to use as beding resistant spans at a free span of 60m with gigantic load bearing capacity. On a free span of 28m the MT has the impressive result of 7.224kg.

The 120x5mm guarantees extreme durability and reduction of users damage. The MT is a real Monster Pre Rig Truss and a rigger`s delight. Trussing of this size need well designed balance of alloy, dimensions and welding procedure. The long braces are made of 60mm as a bigger diameter is necessary to avoid the risk of bending.

660 mm

Eurotruss uses only braces cut by laser to receive a punctual fitting on the main tube avoiding too much welding, heat which weakens the truss.

780 mm

Under strict tested welding procedure the MT Truss is made with superb fast connection system and approved according the DIN EN 1999-1-1 & 1999 -1-1/A2 within Eurocode 9 specifications.

MT-TRUSS

FACTS

• 5mm wall thickness of 120mm main tube • Tolerance free conical connector • High stability aluminium alloy • Excellent load bearing capacity • Low dead weight • High wear resistance • TuV approved

MT TT XT FT100 ST FT50 XD

Measurements MТ Main tube: Braces: Material: Connection: Weight:

120x 5mm 60 (50)x 4mm EN AW-6082 T6 CS4-CON ~60 kg/m

Loadcases MT Span*

10 18 26 34 40 46

UDL

CPL

kg/m

mm**

2254 704 308 157 98 60

21 72 152 262 367 491

⅓ Point Load

¼ Point Load 4 Point Load

kg (2x)

kg (3x)

kg (4x)

11923 6340 4007 2666 1953 1382

18 59 126 225 322 443

9033 4755 3005 2000 1465 1036

23 73 154 266 372 497

6022 3170 2004 1333 977 691

21 69 145 253 356 479

5018 2642 1670 1111 814 576

22 73 153 264 369 493

* in mtr

** mm is the deflection of the truss span at the given load

1180 mm

1060 mm

Due to its special design and shape the MT Truss exhibits an enormous rigidity and can thus be used for very long spans with high loadings.

MT Rectangular Truss MT Corner Block allows various shapes

MT-SYSTEM

CORNER

The ultimate Pre Rig Truss for spans up to 60m The MT System structures on one level allows various structural shapes by using the MT Corner Block. The MT Corner Block is made according to the strength requirements and optimum size to use the Blocks in same configuration as the Sleeve Blocks on the TD50 Tower in Ground Supports or Roof Systems. The MT Corner Block has a standard bold on screw ½ connector

One level construction

MT-175

BLK-MT

BLK-MT MT-175

Measurement Corners for MT-System Size in cm 78,5 x 78,5 79 x 78,5 79 x 79 90º in 4 dir.

Attachment CS4-SCON

Size in mm Bold on Screw ½-Connector for MT *

XT 1060mm

Corner 2-Way BLK-TT 3-Way BLK-TT 4-Way BLK-TT BLK-MT

*4 pcs.required for one attachment

FT100 ST FT50

TT Rectangular Truss Pre Rig Truss for huge loads and long spans

Dimensions TT

The ultimate Pre Rig Truss for spans up to 44m

TT RECTANGULAR TRUSS TThe TT Truss lends itself to use as bending resistance spans at a free span of 44m with extreme load bearing capacity.

1010 mm

950 mm

Due to its special shape and dimensions the TT Truss exhibits a great rigidity and can thus be used for long spans with high loadings. The 60x5mm tube reduces transportation damage and guarantees extreme durability. Trussing with a big profile geometry have long braces which have a risk of bending. The TT Truss is the main truss type for the main rig in the biggest Saddle Roofs (SR-50) and the Pitch Roofs (PR-10). The TT Truss is despite its dimensions and self weight a very easy truss system to handle. The TT Truss can be equipped optional with the heavy duty blue wheels.

520 mm 580 mm

Made with the fast connection system and approved according the DIN EN 1999-1-1 & 1999 -1-1/A2 within Eurocode 9 specifications.

TT-TRUSS

FACTS

• Tolerance free conical connector • High stability aluminium alloy • Excellent load bearing capacity • Low dead weight • High wear resistance • TuV approved • 5mm wall thickness of 60mm main tube

MT TT XT FT100 ST FT50 XD

Measurements TТ Main tube: Braces: Material: Connection: Weight:

60x 5mm 50x 3mm / 30x 3mm EN AW-6082 T6 CS3-CON ~25 kg/m

Loadcases TT Span*

8 16 24 32 38 44

UDL

CPL

kg/m

mm**

1571 390 161 80 50 32

15 64 144 259 369 500

⅓ Point Load

¼ Point Load 4 Point Load

kg (2x)

kg (3x)

kg (4x)

6512 3118 1926 1284 955 696

13 52 119 220 320 445

4884 2339 1445 963 716 522

16 65 147 263 374 506

3256 1559 963 642 477 348

15 61 138 249 357 486

2713 1299 803 535 398 290

16 64 145 261 371 503

* in mtr

** mm is the deflection of the truss span at the given load

TT Rectangular Truss TT Corner Block allows various shapes

TT-SYSTEM

CORNER

The TT-System structures on one level allows various structural shapes by using the TT Corner Block. The TT corner block is made according to the strength requirements and optimum size to use the corner block also as sleeve blocks in TT Roofs Groundsupports. The TT corner blocks have a standard bold on receiver attachment of a length of 85mm. One level construction TT-100

BLK-TT

BLK-TT TT-200

BLK-TT

Measurement Corners for TT-System Size in cm 67 x 67 76 x 67 76 x 76 90ยบ in 4 dir.

Attachment CS3-BOB85

Size in mm 85mm * *4 pcs.required for one attachment

XT FT100

1010mm

Corner 2-Way BLK-TT 3-Way BLK-TT 4-Way BLK-TT BLK-TT

ST 67

m 0m 58 60mm 7

FT50 XD

XT Rectangular Truss Pre Rig Truss for huge loads and long spans

Dimensions XT

The ultimate Pre Rig Truss for spans up to 30m

XT RECTANGULAR TRUSS The XT Truss lends itself to use as bending resistant spans at a free span of 30m with extreme load bearing capacity.

The 50x4mm tube reduces transportation damage and guarantees extreme durability. Trussing with a big profile geometry have long braces which have a risk of bending. The XT Truss is despite its dimensions and self weight a very easy truss system to handle. 520 mm

The XT Truss can be equipped optional with the heavy duty blue wheels.

580 mm

Made with the fast connection system and approved according the DIN EN 1999-1-1 & 1999 -1-1/A2 within Eurocode 9 specifications.

XT-TRUSS

FACTS

• Tolerance free conical connector • High stability aluminium alloy • Excellent load bearing capacity • Low dead weight • High wear resistance • TuV approved • 4mm wall thickness of 50mm main tube

MT TT XT FT100 ST FT50 XD

Measurements XТ Main tube: Braces: Material: Connection: Weight:

50x 4mm 50x / 40x / 30x 3mm EN AW-6082 T6 CS3-CON ~20 kg/m

Loadcases XT Span*

12 16 20 24 28 30

UDL

CPL

kg/m

mm**

369 199 121 78 52 43,

45 80 126 183 252 290

⅓ Point Load

¼ Point Load 4 Point Load

kg (2x)

kg (3x)

kg (4x)

2215 1597 1211 942 739 655

36 66 105 154 215 251

1661 1198 908 707 554 491

46 82 129 187 256 295

1107 798 605 471 369 327

43 77 121 176 243 280

923 665 504 392 308 272

45 81 127 185 253 292

* in mtr

** mm is the deflection of the truss span at the given load

810 mm

750 mm

Due to its special shape and ´dimensions the XT Truss exhibits a great rigidity and can thus be used for long spans with high loadings.

XT Rectangular Truss XT Corner Block allows various shapes

XT-SYSTEM

CORNER

The XT structures on one level allows various structural shapes by using the XT Corner Block. The XT corner block is made according to the strength requirements and optimum size to use the corner block also as sleeve blocks in XT Roofs Groundsupports. The XT corner blocks have a standard bold on receiver attachment of a length of 85mm.

One level construction

XT-100

BLK-XT

BLK-XT XT-200

BLK-XT BLK-XT

Measurement Corners for XT-System Size in cm 66,5 x 66,5 75 x 66,5 75 x 75 90ยบ in 4 dir.

Attachment CS3-BOB85

Size in mm 85mm * *4 pcs.required for one attachment

XT FT100

810mm

Corner 2-Way BLK-XT 3-Way BLK-XT 4-Way BLK-XT BLK-XT

ST 66

m 0m 58 50mm 7

FT50 XD

FT100 Folding Truss Folding Truss with a trapezium geometric for extreme loads

Dimensions FT100

The ultimate Pre Rig Truss for spans up to 44m

97mm

FT100 FOLDING TRUSS The FT100 Truss lends itself to use as bending resistant spans at a free span of 44m with an extreme load bearing capacity of 1.452 kg UDL.

986mm

950m

The FT100 Truss has impressive results due to its special shape and dimensions. The FT100 reduces storage and transportation space and in a folded position an FT 100 has only a height of 16cm. The 60x5mm tube reduces transportation damage and guarantees extreme durability. In the range of the FT100 Truss a clever and strong 4-way corner block is available. Also a FT100 sleeve adapter plate makes it possible to be used on standard TD50, TD44 Tower with TT Sleeve Block. Made with the fast connection system and approved according the DIN EN 1999-1-1 & 1999 -1-1/A2 within Eurocode 9 specifications.

520 mm 580 mm

FT100-TRUSS

FACTS

• Tolerance free conical connector • High stability aluminium alloy • Excellent load bearing capacity • Low dead weight • High wear resistance • Saving stock and trucking space • TuV approved • 5mm wall thickness of 60mm main tube

MT TT XT FT100 ST FT50 XD

Measurements FТ100 Main tube: Braces: Material: Connection: Weight:

60x 5mm 50x 3mm EN AW-6082 T6 CS3-CON ~22 kg/m

Loadcases FT100 Span*

UDL

⅓ Point Load

¼ Point Load 4 Point Load

CPL mm

kg (2x)

kg (3x)

kg (4x)

5049 2679

20 67

3787 2009

26 84

2524 1340

24 79

2104 1116

26 83

kg/m

mm**

10 18

1010 298

25 83

132

174

1718 144

34 40 44

69 44 33

300 419 511

1172 255 884 364 726 450 * in mtr

1289 177 879 663 545

305 426 518

859 166

716 175

586 442 363

488 368 303

289 405 496

302 422 513

** mm is the deflection of the truss span at the given load

FT100 Folding Truss Corner piece with fixed dimensions

Dimensions FT100 folded position

FT100-SYSTEM CORNER The FT100 structures on one level allow various structural shapes by using the special designed FT100 corner block.

159mm

950mm

1010mm

The FT100 corner block is made according to the strength requirements and optimum size to use the corner block in combination with Tower Sleeve Blocks. The FT100 Corner Blocks have standard FT100 Adapter Block.

99mm

One level construction FT100-100

FT100-300

BLK-FT100 BLK-FT100

FT100-200

BLK-FT100 FT100-100

Measurement Corners for FT100 Size in cm 66,5 x 66,5 75 x 66,5 75 x 75 90ยบ in 4 dir.

Attachment BLK-A-FT100

Size in mm FT100 Adapter for Cornerblock *4 pcs.required for one attachment

TT XT 986mm

Corner 2-Way BLK-FT100 3-Way BLK-FT100 4-Way BLK-FT100 BLK-FT100

FT100 ST 67 0m

m 0m m 58 0m 76

FT50 XD

Photo: ÂŠRalph@Larmann.com

Heavy Truss ST Truss FT50 Folding Truss XD Truss

ST Square Truss Square Truss for mammoth loads

Dimensions ST

Square Trussing for mammoth loads

ST SQUARE TRUSS 510mm

The ST System meets the demand for a truss with a high load bearing capacity that lends itself to safe outdoor use, even at a free span of up to 24m at high load. Due to the square profile geometry and the complete diagonal bracing, the ST Truss exhibits the same rigidity in vertical and horizontal directions and can thus be used as support for huge spans in Rock and Roll Productions as well as Pre Rig.

450 mm

The 4mm wall thickness reduces transportation damage and guarantees extreme durability.

510 mm

Made with the fast connection system and approved according the DIN EN 1999-1-1 & 1999 -1-1/A2 within Eurocode 9 specifications.

ST-TRUSS

FACTS

• Tolerance free connection with conical connector • High Stability aluminium alloy • Excellent load-bearing capacity combined with low dead weight • 4mm wall thickness of 50mm main tube • Optimum dimensioning of all components • TuV approved • High wear resistance

MT TT XT FT100 ST FT50 XD

Measurements SТ Main tube: Braces: Material: Connection: Weight:

50x 4mm 30x 3mm EN AW-6082 T6 CS3-CON ~13,5 kg/m

Loadcases ST Span*

6 10 14 18 22 24

UDL

CPL

kg/m

mm**

848 323 159 91 57 46

17 52 103 171 256 306

⅓ Point Load

¼ Point Load = Point Load

kg (2x)

kg (3x)

kg (4x)

2396 13 1613 42 1110 84 817 141 626 215 550 259

1983 1101 833 615 469 413

18 49 105 174 261 311

1377 18 807 50 555 98 410 163 313 246 275 294

1147 672 463 342 261 229

19 53 103 172 258 308

* in mtr

** mm is the deflection of the truss span at the given load

ST Square Truss ST Corner Block allows various shapes

ST-SYSTEM

CORNER

The universal corner block creates flexibility in making various shapes and structures. The ST corner blocks have a standard bold on receiver attachment of a length of 85mm.

One level construction ST-100

BLK-ST

BLK-ST ST-200

BLK-ST

Measurement Corners for ST-System Size in cm 59,5 x 59,5 68 x 59,5 68 x 68 90ยบ in 6 dir.

Attachment CS3-BOB85

Size in mm 85mm * *4 pcs.required for one attachment

XT FT100

510mm

Corner 2-Way BLK-ST 3-Way BLK-ST 4-Way BLK-ST BLK-ST

ST 59

FT50

FT50 Folding Truss Folding Truss with a trapezium geometric for extreme loads

Dimensions FT50

Folding Truss with extreme load capacity 80mm

FT50 FOLDING TRUSS Saving space – unique fold flat capacity 520

Used extensively for heavy loading and easily compatible with 40-er (2t) Ground Support Towers.

531 mm

The FT50 Folding Truss is the perfect solution for touring events.

In large rig structures fixed (non-foldable) corners are available. Made with the fast connection system and approved according the DIN EN 1999-1-1 & 1999 -1-1/A2 within Eurocode 9 specifications.

FT50-TRUSS

520 mm 580 mm

FACTS

MT TT XT FT100 ST FT50 XD

Measurements FT50 Main tube: Braces: Material: Connection: Weight:

50x 4mm 25x 3mm EN AW-6082 T6 CS3-CON ~13,5 kg/m

Loadcases FT50 Span*

2 4 8 12 16 20

UDL

CPL

kg/m

mm**

1901 944 466 231 125 75

0 4 28 72 128 202

3459 1 2794 4 1927 23 1387 58 997 105 753 168

⅓ Point Load

¼ Point Load = Point Load

kg (2x)

kg (3x)

1901 1 1624 4 1221 25 957 68 747 131 565 205 * in mtr

1267 1 1145 4 932 27 693 69 498 123 376 193

kg (4x)

950 897 758 578 415 314

1 4 27 72 129 203

** mm is the deflection of the truss at the given load

FT50 Folding Truss Folding Truss with a trapezium geometric for extreme loads

Dimensions FT50 Folded Position

FT50-SYSTEM

The FT50 structures on one level allow various structural shapes by using the special designed FT50 corner block as well as using standard corners and tees.

148mm

The FT50 corner block is made according to the strength requirements and optimum size to use the corner block in combination with Tower Sleeve Blocks.

580 mm

520 mm

CORNER

Next to the corner block, standard fixed FT50 Corners and Tees are available.

88mm

The FT50 Corner Blocks have standard FT50 Adapter Block.

One level construction

FT50-100

FT50-T

BLK-FT50

FT50-X

FT50-L90

FT50-200 FT50-200

FT50-100

Measurement Corners for FT50 Size in cm 78,5 x 78,5 100 x 78,5 100 x 100 90ยบ in 4 dir.

Attachment BLK-A-FT50

Size in mm FT50 Adapter for Cornerblock* *4 pcs.required for one attachment

TT 986mm

Corner FT50-L90 FT50-T FT50-X BLK-FT50

XT FT100 ST 67 0m m

m 0m m 58 0m 76

FT50 XD

XD Rectangular Truss Rectangular truss for large loads

Dimensions XD

High load capacity at free spans up to 20m:

XD RECTANGULAR TRUSS 400 mm

350 mm

XD straight elements lend themselves to use as span exposed to bending stress resistant spans for vertical loads at a free span of up to 20m at high load. Predestined for indoor use, the XD Truss is characterized in particular by its slender shape and low packing volume. Made with the fast connection system and approved according the DIN EN 1999-1-1 & 1999 -1-1/A2 within Eurocode 9 specifications.

240 mm 290 mm

Note: The XD Truss System is standard equipped with diagonal pin positions but also available is a horizontal pin position (for example XD-300H).

Horizontal Pin

400 mm

350 mm

XD-TRUSS

FACTS

• Tolerance free conical connector

240 mm

• High stability aluminium alloy

290 mm Diagonal Pin

• Excellent load bearing capacity • Low dead weight • High wear resistance • 3mm wall thickness of 50mm main tube • Optimum dimensioning of components • TuV approved

MT TT XT FT100 ST FT50 XD

Measurements XD Main tube: Braces: Material: Connection: Weight:

50x 3mm 25x 3mm EN AW-6082 T6 CS2-CON ~9 kg/m

Loadcases XD Span*

4 8 12 16 18 20

UDL

CPL

kg/m

mm**

983 304 131 70 54 42

9 43 96 172 219 271

2157 7 1216 34 785 78 561 142 484 181 421 226

⅓ Point Load

¼ Point Load = Point Load

kg (2x)

kg (3x)

1767 10 885 42 589 98 421 176 363 223 316 276 * in mtr

1240 10 608 41 392 92 281 165 242 209 211 260

kg (4x)

983 507 327 234 202 175

10 43 97 173 220 273

** mm is the deflection of the truss at the given load

XD Rectangular Truss XD Corners allows shapes in two dimensions

XD-SYSTEM

CORNER

The XD structures on one level allow various structural shapes by using corners and tees as well as using corner blocks (not in combination with standard corners).

BLK-XD

All the transitions down are predestined on HD34 / FD34 to create structures on two levels.

One level construction

XD-X XD-T

XD-100 XD-L90

Two level construction

XD-TD

BLK-XD XD-LD

*HD/FD34

Measurement Corners for XD-System** Size in cm 50 x 50 71 x 50 71 x 42 71 x 71 50 x 50 x 50

Corner XD-TD** XD-XD** BLK-XD* CS2-BOB95

* D = down attachment HD/FD34

Size in mm 71 x 50 x 50 71 x 71 x 50 90ยบ in 4 dir. + 2 dir. HD/FD34 95mm***

** H = horizontal pin / D=diagonal pin

TT XT FT100

400mm

Corner XD-L90** XD-T** XD-T1** XD-X** XD-LD**

ST 39

m 90

***4 pcs. required for one attachment

FT50 XD

HD / FD Truss HD44 / FD44

HD34 / FD34

HD43 / FD43

HD33 / FD33

HD42 / FD42

HD32 / FD32 HD31 / FD31

HD44 / FD44 Square Truss Square Trussing with a square profile geometry for heavy loads

Square Truss for Heavy loads

Dimensions HD44/FD44

HD44/FD44 SQUARE TRUSS

350 mm

HD44 / FD44 with excellent load capacity on free spans of 18m / 16m or to be used as tower elements: 400mm

HD44 / FD44 straight elements lend themselves to use as span exposed to bending stress resistant span up to 18m or as standard tower element. HD44 using the 3mm wall thickness assures durability and extra strength. Designed for high frequency usage or installations, which demand higher loading. Ideal trussing system for rental, touring and exhibition companies. Made with the fast connection system and approved according the DIN EN 1999-1-1 & 1999 -1-1/A2 within Eurocode 9 specifications.

400 mm

HD44 TRUSS

FACTS

• Increased wall thickness of 3mm for 50mm main tubes • Increased loading compared to FD44 (up to 50%) • Also available as TD44 Tower Truss (one side horizontal brace) • TuV approved

FD44 TRUSS

FACTS

• Tolerance free conical connector • 2mm Wall thickness of 50mm main tubes • Also available in any nonstandard length and shape • TuV approved

HD/FD44 HD/FD43 HD/FD42 HD/FD34 HD/FD33 HD/FD32 HD/FD31

Measurements

Loadcases HD44 HD44

Main tube: Braces: Material: Connection: Weight:

FD44

50x 3mm 50x 2mm 25x 2mm 25x 2mm EN AW-6082 T6 CS1-CON ~9,5 kg/m ~7,5 kg/m

Span*

3 6 9 12 15 18

UDL

CPL

kg/m

mm**

925 459 239 131 81 54

3 20 54 96 151 218

2524 4 1625 19 1075 44 787 78 610 124 488 181

⅓ Point Load

¼ Point Load = Point Load

kg (2x)

kg (3x)

kg (4x)

925 821 538 394 305 244

3 23 51 92 144 209

693 684 448 328 254 203

3 24 55 97 152 220

1387 3 1071 21 807 55 590 98 457 154 366 223 * in mtr

** mm is the deflection of the truss at the given load

HD44 / FD44 Square Truss Universal Corner Block for various shapes

One level construction

HD44 / FD44

CORNER

These elements allow constructions in up to two levels, thus permitting almost limitless possibilities for the realization of creative ideas.

HD/FD44-T

HD / FD44-L90

To avoid various corner problems or increasing strength in the corner parts, the universal corner block with bold on receivers of 100mm is the answer. HD/FD44-X HD/FD44-100

Measurement Corners for HD44 / FD44

BLK-44

Cornercode Size in cm HD/FD44-L45 150 x 150 HD/FD44-L60 100 x 100 HD/FD44-L90 50 x 50 HD/FD44-L120 50 x 50 HD/FD44-L135 50 x 50 HD/FD44-T 60 x 50 HD/FD44-X 60 x 60 HD/FD44-LD 50 x 50 HD/FD44-TD 60 x 50 x 50 HD/FD44-XD 60 x 60 x 50 HD/FD44-XUD 60 x 60 x 60 BLK-44 90º in 6 dir. CS1-BOB100 100mm* SC-4X 0-180°, Swivelcorner SB-4X 0-180°, Swivelbase BC-4X 0-180°, Bookcorner

BLK-44

Two level construction HD/FD44-TD

HD/FD44-XD HD/FD44-LD

BLK-44

Loadcases FD44 Span*

CPL

kg/m

mm**

925 371 161 88 54 35

4 24 54 97 152 219

1646 4 1067 19 724 44 525 79 401 125 316 183

⅓ Point Load

¼ Point Load = Point Load

kg (2x)

kg (3x)

kg (4x)

985 700 527 394 301 237

4 21 54 99 155 223

722 545 362 263 201 158

4 22 52 92 145 210

569 454 302 219 167 132

4 24 55 97 153 221

HD/FD43 HD/FD42 HD/FD34

400mm

3 6 9 12 15 18

HD/FD44

UDL

HD/FD33 50

*4 pcs. required for one attachment

HD/FD32 HD/FD31

HD43 / FD43 Triangle Truss Triangular Truss with equilateral profile geometry for heavy loads

Triangular Truss for Heavy loads

Dimensions HD43 / FD43

HD43/FD43 TRIANGLE TRUSS HD43 / FD43 with excellent load capacity on free spans of 16m.

HD43 using the 3mm wall thickness assures durability and extra strength.

353mm

0m m

HD43 / FD43 straight elements lend themselves to use as span exposed to bending stress resistant span up to 16m.

Designed for high frequency usage or installations, that demand higher loading. Combined with HD44 / FD44, they possess a broad range of applications. Made with the fast connection system and approved according the DIN EN 1999-1-1 & 1999 -1-1/A2 within Eurocode 9 specifications.

HD43 TRUSS

350 mm 400 mm

FACTS

• Increased wall thickness of 3mm for 50mm main tubes • Increased loading compared to FD43 (up to 50%)

FD43 TRUSS

FACTS

• Tolerance free conical connector • 2mm Wall thickness for 50mm main tubes • Also available in any non-standard length and shape • TuV approved

HD/FD44 HD/FD43 HD/FD42 HD/FD34 HD/FD33 HD/FD32 HD/FD31

Loadcases HD43

Measurements HD43 Main tube: Braces: Material: Connection: Weight:

FD43

50x 3mm 50x 2mm 25x 2mm 25x 2mm EN AW-6082 T6 CS1-CON ~5,9 kg/m ~5,1 kg/m

Span*

3 6 9 12 14 16

UDL

CPL

kg/m

mm**

784 235 101 55 39 28

4 21 47 83 114 150

1432 4 704 17 456 38 328 68 271 94 227 125

⅓ Point Load

¼ Point Load = Point Load

kg (2x)

kg (3x)

kg (4x)

977 528 342 246 203 170

5 21 48 85 116 152

716 352 228 164 135 113

5 20 45 80 109 143

588 293 190 137 113 95

5 21 47 84 115 151

* in mtr

** mm is the deflection of the truss at the given load

HD43 / FD43 Triangle Truss Triangular Truss with equilateral profile geometry for heavy loads

HD43 / FD43

CORNER

The HD43 / FD43 series allow a wide variety of structural shapes in two levels by using corners, cross-pieces and tees (all available with down attachments) One level construction

Optically and statically adapted to fit the straight elements. HD/FD43-T

Measurement Corners for HD43 / FD43

HD/FD43-X HD/FD43-L90

HD/FD43-100

Two level construction

Cornercode Size in cm HD/FD43-L45 150 x 150 HD/FD43-L60 100 x 100 HD/FD43-L90 50 x 50 HD/FD43-L120 50 x 50 HD/FD43-L135 50 x 50 HD/FD43-T 60 x 50 HD/FD43-X 60 x 60 HD/FD43-LD L/R 50 x 50 HD/FD43-060D 60 x 50 HD/FD43-TD 60 x 50 x 50 HD/FD43-XD 60 x 60 x 50 SC-4X 0-180°, Swivelcorner SB-4X 0-180°, Swivelbase BC-4X 0-180°, Bookcorner

HD/FD43-TD

HD/FD43-XD HD/FD43-LD

Loadcases FD43 Span*

3 6 9 12 14 16

HD/FD44

UDL

CPL

kg/m

mm**

649 159 68 36 25 18

5 21 47 84 114 150

⅓ Point Load

¼ Point Load = Point Load

kg (2x)

kg (3x)

kg (4x)

973 476 306 217 177 146

4 17 38 69 95 127

642 357 229 163 133 110

5 21 48 85 116 153

487 238 153 109 89 73

5 20 45 80 110 144

406 198 127 90 74 61

5 21 47 84 115 151

HD/FD43 HD/FD42 HD/FD34 HD/FD33 HD/FD32 HD/FD31

HD42 / FD42 Ladder Truss Ladder truss for medium loads

Ladder truss for vertical rigs

Dimensions HD42 / FD42

HD42 / FD42 LADDER TRUSS HD42/FD42 guarantees optimum load bearing capacity up to spans of 8m.

Combined with HD44 / FD44 they possess a broad range of applications. The HD42 / FD42 is suitable for hanging rigs vertically.

400mm

350mm

HD42/ FD42 straight elements lend themselves to use as span exposed to bending stress, cantilevered up to 4m or supported up to 8m.

Made with the fast connection system and approved according the DIN EN 1999-1-1 & 1999 -1-1/A2 within Eurocode 9 specifications.

HD42 TRUSS

FACTS

• Increased wall thickness of 3mm for 50mm main tubes • Increased loading compared to FD42 (up to 50%) • Compatible with HD44

FD42 TRUSS

FACTS

• Tolerance free conical connector • Wall thickness of 2mm for 50mm main tubes • Compatible with FD44 • Also available in any nonstandard length and shape • TuV approved

HD/FD44

Measurements

HD/FD43 HD/FD42 HD/FD34 HD/FD33 HD/FD32 HD/FD31

Loadcases HD42 HD42

Main tube: Braces: Material: Connection: Weight:

FD42

50x 3mm 50x 2mm 25x 2mm 25x 2mm EN AW-6082 T6 CS1-CON ~4,5 kg/m ~3,5 kg/m

Span*

2 4 6 8 10

UDL

CPL

kg/m

mm**

838 391 271 151 95

1 10 35 62 97

⅓ Point Load

¼ Point Load = Point Load

kg (2x)

kg (3x)

kg (4x)

1257 1148 813 604 475

2 12 28 50 78

838 664 604 453 356

2 12 35 63 99

559 515 406 302 237

2 13 33 59 92

419 382 338 252 197

2 12 35 62 97

* in mtr

** mm is the deflection of the truss at the given load

HD42 / FD42 Ladder truss Ladder truss for medium loads

HD42 / FD42

CORNER

The HD42 / FD42 series allow a wide variety of structural shapes in one level by using corners, cross-pieces and tees. Optically and statically adapted to fit the straight elements. Other than HD32 / FD32 System the HD42 / FD42 System is only suitable for using vertically. BLK-42

Measurement Corners for HD42 / FD42 Cornercode HD/FD42-L45/V HD/FD42-L60/V HD/FD42-L90/V HD/FD42-L120/V HD/FD42-L135/V HD/FD42-T/V HD/FD42-X/V BLK-42 CS1-BOB105

Vertical construction

HD/FD42-T

Size in cm 50 x 50 - Vertical 50 x 50 - Vertical 50 x 50 - Vertical 50 x 50 - Vertical 50 x 50 - Vertical 50 x 50 - Vertical 50 x 50 - Vertical 90º in 4 dir.* 105mm

HD/FD42-X HD/FD42-L90 HD/FD42-100

Loadcases FD42 Span*

⅓ Point Load

¼ Point Load = Point Load

HD/FD43

kg (2x)

kg (3x)

kg (4x)

HD/FD42

1257 804 569 423 333

2 12 28 50 79

838 531 423 317 249

3 13 35 63 99

559 412 284 211 166

2 15 33 59 92

419 344 237 176 138

2 15 35 62 97

UDL

CPL

kg/m

mm**

838 391 184 103 64

2 15 35 62 97

400mm

2 4 6 8 10

HD/FD44

15 0m

HD/FD34 HD/FD33 m 0m

*2 pcs. required for one attachment

HD/FD32 HD/FD31

HD34 / FD34 Square Truss Square Trussing with a square profile geometry for larger loads.

Square Trussing for Heavy loads

Dimensions HD34 / FD34

HD34 / FD34 SQUARE TRUSS

240 mm

HD34 / FD34 with excellent load capacity on free spans of 18m / 16m or to be used as tower elements: 290mm

HD34 / FD34 straight elements lend themselves to use as span exposed to bending stress resistant span up to 18m / 16m or as standard tower element. HD34 using the 3mm wall thickness assures durability and extra strength. Designed for high frequency usage or installations, which demands higher loading. Ideal trussing system for rental, touring and exhibition companies. Made with the fast connection system and approved according the DIN EN 1999-1-1 & 1999 -1-1/A2 within Eurocode 9 specifications.

290 mm

HD34 TRUSS

FACTS

• Increased wall thickness of 3mm for 50mm main tubes • Increased loading compared to FD34 (up to 50%) • Also usable as HD34 Tower Truss • TuV approved

FD34 TRUSS

FACTS

• Tolerance free conical connector • Wall thickness of 2mm for 50mm main tubes • Also available in any nonstandard length and shape • TuV approved

HD/FD44 HD/FD43 HD/FD42 HD/FD34 HD/FD33 HD/FD32 HD/FD31

Loadcases HD34

Measurements HD34 Main tube: Braces: Material: Connection: Weight:

FD34

50x 3mm 50x 2mm 20x 2mm 20x 2mm EN AW-6082 T6 CS1-CON ~7,5 kg/m ~6 kg/m

Span*

3 6 9 12 15 18

UDL

CPL

kg/m

mm**

757 373 162 88 54 36

4 35 78 139 219 317

2089 6 1120 28 730 63 530 114 405 180 319 265

⅓ Point Load

¼ Point Load = Point Load

kg (2x)

kg (3x)

kg (4x)

757 560 365 265 203 160

6 33 74 133 209 304

568 467 304 221 169 133

5 35 79 140 220 319

1135 6 840 35 547 80 397 142 304 223 239 323 * in mtr

** mm is the deflection of the truss at the given load

HD34 / FD34 Square Truss Example of a one level and a two level construction

HD34 / FD34

CORNER

These elements allow constructions in up to three levels, thus permitting almost limitless possibilities for the realization of creative ideas.

One level construction

HD/FD34-T

HD/FD34-X

To avoid various corner problems or increasing strength in the corner parts, the universal cornerblock with bold on receivers in various lengths is the answer.

HD/FD34-L90

In the cornerblock as well as in the bold on receivers a small hole is drilled to match a spring pin so the position is determined.

HD/FD34-100

BLK-34 BC-3X

Easy to connect, safe and fully locked. Measurement Corners for HD34 / FD34 Cornercode Size in cm HD/FD34-L45 100 x 100 HD/FD34-L60 100 x 100 HD/FD34-L90 50 x 50 HD/FD34-L120 50 x 50 HD/FD34-L135 50 x 50 HD/FD34-T 50 x 50 HD/FD34-X 50 x 50 HD/FD34-LD 50 x 50 HD/FD34-TD 50 x 50 HD/FD34-XD 50 x 50 x 50 HD/FD34-XUD 50 x 50 x 50 BLK-34 90º in 6 dir. CS1-BOB105 105mm* CS1-BOBA210 210mm* SC-3X 0-180°, Swivelcorner SB-3X 0-180°, Swivelbase BC-3X 0-180°, Bookcorner

BLK-34

Two level construction HD/FD34-TD

HD/FD34-L90 HD/FD34-XD

HD/FD34-LD

HD/FD34-T BLK-34

HD/FD34-050

SB-3X

Loadcases FD34 Span*

CPL

kg/m

mm**

758 254 110 59 42 31

6 35 78 139 190 250

1375 6 761 28 494 63 356 114 296 157 249 208

⅓ Point Load

¼ Point Load = Point Load

kg (2x)

kg (3x)

kg (4x)

853 565 370 267 222 187

7 35 80 142 194 254

645 380 247 178 148 124

7 33 74 133 182 239

523 317 206 149 123 104

7 35 79 141 192 251

HD/FD44

HD/FD43 HD/FD42

290mm

3 6 9 12 14 16

UDL

HD/FD34 HD/FD33 50

*4 pcs. required for one attachment

HD/FD32 HD/FD31

HD34 / FD34 Square Truss Square Trussing with a square profile geometry for larger loads.

Dimensions HD34 / FD34

Square Trussing for Heavy loads

HD34 / FD34 SQUARE TRUSS

240 mm

HD34 / FD34 with excellent load capacity on free spans of 18m / 16m or to be used as tower elements: 290mm

290 mm

Made with the fast connection system and approved according the DIN EN 1999-1-1 & 1999 -1-1/A2 within Eurocode 9 specifications.

HD34 TRUSS

FACTS

• Increased wall thickness of 3mm for 50mm main tubes • Increased loading compared to FD34 (up to 50%) • Also usable as HD34 Tower Truss • TuV approved

FD34 TRUSS

FACTS

• Tolerance free conical connector • Wall thickness of 2mm for 50mm main tubes • Also available in any nonstandard length and shape • TuV approved

HD/FD44 HD/FD43 HD/FD42 HD/FD34 HD/FD33 HD/FD32 HD/FD31

Loadcases HD34

Measurements HD34 Main tube: Braces: Material: Connection: Weight:

FD34

50x 3mm 50x 2mm 20x 2mm 20x 2mm EN AW-6082 T6 CS1-CON ~7,5 kg/m ~6 kg/m

Span*

3 6 9 12 15 18

UDL

CPL

kg/m

mm**

757 373 162 88 54 36

4 35 78 139 219 317

2089 6 1120 28 730 63 530 114 405 180 319 265

⅓ Point Load

¼ Point Load = Point Load

kg (2x)

kg (3x)

kg (4x)

757 560 365 265 203 160

6 33 74 133 209 304

568 467 304 221 169 133

5 35 79 140 220 319

1135 6 840 35 547 80 397 142 304 223 239 323 * in mtr

** mm is the deflection of the truss at the given load

HD34 / FD34 Square Truss Example of a two level and a three level construction

HD34 / FD34

CORNER

These elements allow constructions in up to three levels, thus permitting almost limitless possibilities for the realization of creative ideas.

One level construction

HD/FD34-T

HD/FD34-L90

To avoid various corner problems or increasing strength in the corner parts, the universal cornerblock with bold on receivers in various lengths is the answer.

HD/FD34-X

In the cornerblock as well as in the bold on receivers a small hole is drilled to match a spring pin so the position is determined.

HD/FD34-100

BLK-34 BC-3X

Two level construction

BLK-34

HD/FD34-XD

HD/FD34-XUD

HD/FD34-TD

HD/FD34-X BLK-34

Loadcases FD34 Span*

CPL

kg/m

mm**

758 254 110 59 42 31

6 35 78 139 190 250

1375 6 761 28 494 63 356 114 296 157 249 208

⅓ Point Load

¼ Point Load = Point Load

kg (2x)

kg (3x)

kg (4x)

853 565 370 267 222 187

7 35 80 142 194 254

64 380 247 178 148 124

7 33 74 133 182 239

52 317 206 149 123 104

7 35 79 141 192 251

HD/FD44

HD/FD43 HD/FD42

290mm

3 6 9 12 14 16

UDL

HD/FD34 HD/FD33 50

*4 pcs. required for one attachment

HD/FD32 HD/FD31

HD33 / FD33 Triangle Truss - two tubes up Triangular Truss with equilateral profile geometry for larger loads.

Triangle Truss – two tubes up – for Heavy loads

Dimensions HD33 / FD33

HD33 / FD33 TRIANGLE TRUSS

290 mm

HD33 / FD33 with excellent load capacity on free spans of 12m.

240 mm

HD33 / FD33 straight elements lend themselves to use as span exposed to bending stress resistant span up to 12m. HD33 using the 3mm wall thickness assures durability and extra strength. 29 0m m

258mm

Designed for high frequency usage or installations, which demands higher loading. Combined with HD34 / FD34, they posses a broad range of applications. Made with the fast connection system and approved according the DIN EN 1999-1-1 & 1999 -1-1/A2 within Eurocode 9 specifications.

HD33 TRUSS

FACTS

• Increased wall thickness of 3mm for 50mm main tubes • Increased loading compared to FD33 (up to 50%)

FD33 TRUSS

FACTS

• Tolerance free conical connector • Wall thickness of 2mm for 50mm main tubes • Also available in any nonstandard length and shape • TuV approved

HD/FD44 HD/FD43 HD/FD42 HD/FD34 HD/FD33 HD/FD32 HD/FD31

Loadcases HD33

Measurements HD33 Main tube: Braces: Material: Connection: Weight:

FD33

50x 3mm 50x 2mm 20x 2mm 20x 2mm EN AW-6082 T6 CS1-CON ~5,5 kg/m ~4,5 kg/m

Span*

3 5 8 11 14 16

UDL

CPL

kg/m

mm**

654 232 88 44 25 18

7 21 53 101 165 216

⅓ Point Load

¼ Point Load = Point Load

kg (2x)

kg (3x)

kg (4x)

980 580 350 242 176 145

6 17 43 83 138 183

735 435 263 181 132 109

8 21 54 103 168 220

490 290 175 121 88 72

7 20 51 96 158 208

408 242 146 101 74 60

8 21 53 102 166 217

* in mtr

** mm is the deflection of the truss at the given load

HD33 / FD33 Triangle Truss - two tubes up Triangular Truss with equilateral profile geometry for larger loads.

One level construction

HD/FD33-T

HD33 / FD33

CORNER HD/FD33-X

The HD33 / FD33 series allow a wide variety of structural shapes in up to three levels by using corners, cross-pieces and tees (all available with down and up attachments) Permitting almost limitless possibilities for the realization of creative ideas.

HD/FD33-L90

HD/FD33-100 HD/FD33-L90

Optically and statically adapted to fit the straight elements.

HD/FD33-TU L

Measurement Corners for HD33 / FD33

HD/FD33-XU

Cornercode Size in cm HD/FD33-L45 100 x 100 HD/FD33-L60 100 x 100 HD/FD33-L90 50 x 50 HD/FD33-L120 50 x 50 HD/FD33-L135 50 x 50 HD/FD33-T 50 x 50 HD/FD33-X 50 x 50 HD/FD33-U90 50 x 50 HD/FD33-LU L/R 50 x 50 HD/FD33-050U 50 x 50 HD/FD33-TU L/R 50 x 50 x 50 HD/FD33-XU 50 x 50 x 50 HD/FD33-LDU L/R 50 x 50 x 50 HD/FD33-TDU L/R 50 x 50 x 50 HD/FD33-050UD 50 x 50 HD/FD33-XUD 50 x 50 x 50 SC-3X 0-180°, Swivelcorner SB-3X 0-180°, Swivelbase BC-3X 0-180°, Bookcorner

Two level construction

HD/FD33-LU L

HD/FD33-U90

HD/FD33-050U

HD/FD33-LU R

Three level construction HD/FD33-TDU L

HD/FD33-XUD

HD/FD33-LDU L

HD/FD33-050UD HD/FD33-LDU R

Loadcases FD33 Span*

3 5 8 10 11 12

HD/FD44

UDL

CPL

kg/m

mm**

444 157 59 36 29 24

7 21 53 83 101 120

⅓ Point Load

¼ Point Load = Point Load

kg (2x)

kg (3x)

kg (4x)

667 393 236 182 161 144

6 17 43 68 83 100

500 295 177 136 121 108

8 21 54 85 103 123

333 197 118 91 81 72

7 20 51 80 97 115

278 164 98 76 67 60

8 21 53 84 102 121

HD/FD43 HD/FD42 HD/FD34 HD/FD33 HD/FD32 HD/FD31

HD33 / FD33 Triangle Truss - two tubes down Triangular Truss with equilateral profile geometry for larger loads.

Triangle Truss – two tubes down – for Heavy loads

Dimensions HD33 / FD33

HD33 / FD33 TRIANGLE TRUSS HD33 / FD33 with excellent load capacity on free spans of 12m.

HD33 using the 3mm wall thickness assures durability and extra strength.

258mm

29 0m m

HD33 / FD33 straight elements lend themselves to use as span exposed to bending stress resistant span up to 12m.

HD33 TRUSS

240 mm 290 mm

FACTS

• Increased wall thickness of 3mm for 50mm main tubes • Increased loading compared to FD33 (up to 50%)

FD33 TRUSS

FACTS

• Tolerance free conical connector • Wall thickness of 2mm for 50mm main tubes • Also available in any nonstandard length and shape • TuV approved

HD/FD44 HD/FD43 HD/FD42 HD/FD34 HD/FD33 HD/FD32 HD/FD31

Loadcases HD33

Measurements HD33 Main tube: Braces: Material: Connection: Weight:

FD33

50x 3mm 50x 2mm 20x 2mm 20x 2mm EN AW-6082 T6 CS1-CON ~5,5 kg/m ~4,5 kg/m

Span*

3 5 8 11 14 16

UDL

CPL

kg/m

mm**

654 232 88 44 25 18

7 21 53 101 165 216

⅓ Point Load

¼ Point Load = Point Load

kg (2x)

kg (3x)

kg (4x)

980 580 350 242 176 145

6 17 43 83 138 183

735 435 263 181 132 109

8 21 54 103 168 220

490 290 175 121 88 72

7 20 51 96 158 208

408 242 146 101 74 60

8 21 53 102 166 217

* in mtr

** mm is the deflection of the truss at the given load

HD33 / FD33 Triangle Truss - two tubes down Triangular Truss with equilateral profile geometry for larger loads.

HD33 / FD33

CORNER

One level construction

HD/FD33-T

The HD33 / FD33 series allow a wide variety of structural shapes in up to three levels by using corners, cross-pieces and tees (all available with down and up attachments)

HD/FD33-L90

Permitting almost limitless possibilities for the realization of creative ideas.

HD/FD33-X HD/FD33-100

Optically and statically adapted to fit the straight elements.

BC-3X

Measurement Corners for HD33 / FD33

HD/FD33-TD L

Cornercode Size in cm HD/FD33-L45 100 x 100 HD/FD33-L60 100 x 100 HD/FD33-L90 50 x 50 HD/FD33-L120 50 x 50 HD/FD33-L135 50 x 50 HD/FD33-T 50 x 50 HD/FD33-X 50 x 50 HD/FD33-D90 50 x 50 HD/FD33-LD L/R 50 x 50 HD/FD33-050D 50 x 50 HD/FD33-TD L/R 50 x 50 x 50 HD/FD33-XD 50 x 50 x 50 HD/FD33-LDU L/R 50 x 50 x 50 HD/FD33-TDU L/R 50 x 50 x 50 HD/FD33-050UD 50 x 50 HD/FD33-XUD 50 x 50 x 50 SC-3X 0-180°, Swivelcorner SB-3X 0-180°, Swivelbase BC-3X 0-180°, Bookcorner

Two level construction

HD/FD33-D90 HD/FD33-LD L

HD/FD33-XD

HD/FD33-050D

HD/FD33-LD R

HD/FD33-TDU L

Three level construction

HD/FD33-LDU L

HD/FD33-XUD

HD/FD33-LDU R HD/FD33-050UD

Loadcases FD33 Span*

3 5 8 10 11 12

HD/FD44

UDL

CPL

kg/m

mm**

444 157 59 36 29 24

7 21 53 83 101 120

⅓ Point Load

¼ Point Load = Point Load

kg (2x)

kg (3x)

kg (4x)

667 393 236 182 161 144

6 17 43 68 83 100

500 295 177 136 121 108

8 21 54 85 103 123

333 197 118 91 81 72

7 20 51 80 97 115

278 164 98 76 67 60

8 21 53 84 102 121

HD/FD43 HD/FD42 HD/FD34 HD/FD33 HD/FD32 HD/FD31

HD32 / FD32 Ladder truss Ladder truss for medium loads

Dimensions HD32 / FD32

Ladder truss for vertical and horizontal rigs

HD32 / FD32 LADDER TRUSS HD32 / FD32 guarantees optimum load bearing capacity up to spans of 8m 290mm

240mm

HD32/ FD32 straight elements lend themselves to use as span exposed to bending stress, cantilevered up to 4m or supported up to 8m. Combined with HD34 / FD34 Truss they possess a broad range of applications. Made with the fast connection system and approved according the DIN EN 1999-1-1 & 1999 -1-1/A2 within Eurocode 9 specifications.

Vertical

240mm

HD32 TRUSS

290mm

FACTS

Horizontal

• Increased wall thickness of 3mm for 50mm main tubes • Increased loading compared to FD32 (up to 50%) • Compatible with HD34

FD32 TRUSS

FACTS

• Tolerance free conical connector • Wall thickness of 2mm for 50mm main tubes • Compatible with FD34 • Also available in any nonstandard length and shape • TuV approved

HD/FD44 HD/FD43 HD/FD42 HD/FD34 HD/FD33 HD/FD32 HD/FD31

Loadcases HD32

Measurements HD32 Main tube: Braces: Material: Connection: Weight:

FD32

50x 3mm 50x 2mm 20x 2mm 20x 2mm EN AW-6082 T6 CS1-CON ~4 kg/m ~3 kg/m

Span*

2 4 6 8 9 10

UDL

CPL

kg/m

mm**

569 283 187 103 81 65

1 10 35 62 78 97

⅓ Point Load

¼ Point Load = Point Load

kg (2x)

kg (3x)

kg (4x)

854 831 560 414 365 325

2 12 28 50 63 78

569 481 416 310 273 244

2 12 35 63 80 99

380 373 280 207 182 162

2 13 33 59 74 92

285 277 233 172 152 135

2 12 35 62 79 97

* in mtr

** mm is the deflection of the truss at the given load

HD32 / FD32 Ladder truss Ladder truss for medium loads

HD32 / FD32

CORNER

The HD32 / FD32 series allow a wide variety of structural shapes in one level by using corners, cross-pieces and tees.

Horizontal construction

Optically and statically adapted to fit the straight elements. HD32 / FD32 System is suitable for using horizontally and vertically. The load capacity is identical.

BLK-32

HD/FD32-X/H

HD/FD32-100

Measurement Corners for HD32 / FD32 Cornercode HD/FD32-L45/V (H) HD/FD32-L60/V (H) HD/FD32-L90/V (H) HD/FD32-L120/V (H) HD/FD32-L135/V (H) HD/FD32-T/V (H) HD/FD32-X/V (H) BLK-32 CS1-BOB105 CS1-BOBA210

HD/FD32-T/H

HD/FD32-L90/H

Vertical construction

Size in cm 100 x 100 100 x 100 50 x 50 50 x 50 50 x 50 50 x 50 50 x 50 90º in 4 dir. 105mm* 210mm*

HD/FD32-T/V

HD/FD32-X/V

HD/FD32-L90/V HD/FD32-100

Loadcases FD32 Span*

CPL

kg/m

mm**

570 284 127 70 55 44

2 15 35 62 78 97

⅓ Point Load

¼ Point Load = Point Load

kg (2x)

kg (3x)

kg (4x)

855 565 380 280 247 219

2 12 28 50 64 79

570 368 282 210 185 164

3 13 35 63 80 99

380 286 190 140 123 110

2 15 33 59 74 92

285 236 158 117 103 91

2 15 35 62 79 97

HD/FD43 HD/FD42

290mm

2 4 6 8 9 10

HD/FD44

UDL

15 5m

HD/FD34 HD/FD33

HD/FD32 HD/FD31

*2 pcs. required for one attachment

HD31 / FD31 Single Tube Series HD31 / FD31 (Single Tubes with CS1 Connectors) for decorative purposes

Highest accuracy for perfect fitting:

Standard HD/FD31 Structure

HD/FD31 SINGLE TUBE Eurotruss has developed a new line made out of standard HD/FD31 (Single Tubes with CS1 Connectors) The demand for a simple and fast single tube structure program has led to a broad HD/FD31 range with multi purpose corners and accessories. With usage of the standard corners and accessories everything in one level, horizontally can be build and all horizontal structures can be build on legs. Eurotruss developed next to the standard structures three various »roof« structures - Type R (saddle roof), CR (arc roof) and SR (saddle roof with horizontal bridge »not shown«).

Saddle Roof HD/FD31-R

The complexity of the system is the positioning of the pins. Eurotruss has solved this matter by using all pins horizontally in one level and all down attachments have a diagonal pin. In the »roof« corners the pin position has been chosen in such a way that the pin will not interfere with covering fabric. All corners in the »roof« area have horizontal pin positioning and the legs diagonal pin positioning. The slope of the saddle »roof« is minimum 20 degree which Eurotruss has adapted as standard slope (higher degree slope is »custom made«, less slope is not possible) The smallest tube length in straight is 20cm, everything required less in length can be solved with spacers. Eurotruss has developed two standard base plates using screw on half connectors to be flexible with pin positioning. The standard base plate is an aluminium plate 250x250mm for HD/FD31 only and a heavy duty plate of galvanized steel 600x600mm with pre-drilled holes for HD/FD44 - HD/FD34 and HD/FD31 usage (due to its size and weight, one side handle is standard). Both base plates are 8mm thick. Always guaranteed usage of standard CS1 (FD/HD) Connection System.

HD/FD44 HD/FD43 HD/FD42 HD/FD34 HD/FD33 HD/FD32 HD/FD31

Arc Roof HD/FD31-CR

HD31 / FD31 Single Tube Series HD31 / FD31 Individual Corners and Parts HD/FD31-CR005 X-Joint for Roof Type1

Arc Roof Construction

HD/FD31-CR004 T-Joint for Roof

HD/FD31-CR002 L90+Down right HD/FD31-CR003 T+Down

HD/FD31-CR011 L90 right

HD/FD31-SR006 X-Joint Type 1 for Roof HD/FD31-SR005 T-Joint for Roof HD/FD31-CR001 T+Down left

Saddle Roof Construction

HD/FD31-SR002 L90+Down right

HD/FD31-CR010 L90 left

150

D31-

HD/F

HD/FD31-SR003 T-Joint +Down left

ube -

T Single

150c

HD/FD31-SR001 L90+Down left

Base plates

HPLB31 600x600x8mm

PLB31 250x250x8mm

StandardConstruction

HD/FD31-L90 20x20cm

HD/FD31-T 35x20cm

HD/FD31-X 35x35cm

HD/FD31-D90 20x20cm

HD/FD31-L90D 20x20x20cm

HD/FD31-T90D 35x20x20cm

HD/FD31-XD 35x35x20cm

HD/FD31-035D 35x20cm

HD/FD44 HD/FD43 HD/FD42 HD/FD34 HD/FD33 HD/FD32 HD/FD31

Photo: ©Ralph@Larmann.com

Tour Truss CWT – Catwalk Truss RTS – Pre Rig Swing Truss PRT – Pre Rig Truss

CWT Catwalk Truss Multi versatile heavy load catwalk truss

Multi versatile heavy load catwalk truss:

CWT CATWALK TRUSS New is the Eurotruss CWT Truss, originally designed as a Catwalk Truss but redesigned to a MULTI VERSATILE HEAVY LOAD CATWALK TRUSS. CWT Truss is the most innovative and versatile structure which can be used as a catwalk truss with aluminium inlay and as two heavy duty pre rig trussing as the truss can be used in flat and/or upright position. By using a combo connection you can build it with a conical connector and or gable connector. The gable connector is turnable so it can be used horizontally and vertically (to make round shapes) The truss can be ordered with a wagon (dolly wagon) which can be placed on top or under the truss. The truss is integrated with fixed welded receivers in order to fix the wagon on top (rigging position) or under the truss (in dolly position). If the wagon is placed under the truss you can leave your lighting features attached and store or transport the Catwalk truss as it is turned into an integrated dolly. The CWT Truss is equipped with a square tube on the 800mm side and carries various holes to attach and fix the couplers for the lighting features.

CWT-TRUSS

FACTS

• One solution for three applications

The new innovative CWT Truss is a pure riggers' delight !

• Functional design and easy assembly • Saving trucking volume • Hinges for various hanging • High wear resistance • TuV approved • 4mm wall thickness of main tubes

Measurements CWT

RTS

PRT

CWT

Loadcases CWT***

CWT

inside: 750x350mm outside: 800x400mm Main tube + Braces: 50x 4mm + 40 (30) x 3mm Material: EN AW-6082 T6 Straight brace: 50x 50x 4mm square tube Material+ Conn.: EN AW-6060 I CS3-CON Weight in kg/m: 21,6kg excl. railing and plate 40,1kg incl. railing and plate * in mtr

Span*

10 20 30 10 19 29

UDL

CPL

kg/m

mm**

538 119 42 585 131 47

31 127 292 29 117 268

⅓ Point Load

¼ Point Load > Point Load

kg (2x)

kg (3x)

kg (4x)

2475 23 1194 106 628 254 2557 21 1260 97 678 232

1896 895 471 1707 945 509

30 129 296 24 119 272

1345 597 314 1335 630 339

30 122 282 26 112 259

1121 497 261 1101 525 283

32 128 293 28 118 269

** mm is the deflection of the truss at the given load

*** Non-marked = flat position Marked = upright position

CWT Catwalk Truss One truss with three applications

CWT-SYSTEM

PARTS

The CWT System has following parts: CWT-L** Lengths L=2,4m / 3,2m CWT-HR

Handrailing L=2,4m / 3,2m

CWT-FL

Anti-slip flooring with hedges

CWT-WH Dollie frame + castors CWT-TB

Lighting tube L=2,4, / 3,2m

CWT-SUS Suspension set for hanging CWT-HSA Hinges (for various angles)

810 mm 1900 mm

410 mm

1840 mm

1900 mm

844 mm

Measurements for CWT-System: Dimensions CWT Truss complete Pre Rig upright Pre Rig flat

CWT

Size (height x width) 1580 x 800mm (hanging) 520 x 810mm (hanging) 810 x 520mm (hanging)

1790 x 844mm (transport) 400 x 800mm (transport) 800 x 400mm (transport)

Receiver CS3-BOB85

Size 85mm *

RTS

*4 pcs. required for *one attachment

PRT

Truss can be used:

height 400mm width 800mm

and

height 800mm width 400mm

RTS Pre Rig Swing Truss Foldable and stackable moving head truss system

Carries moving heads permanently:

RTS TRUSS RTS Truss is the new versatile truss structure which can be used to carry moving heads. No more flight cases and truss in your storage nor in your truck. It saves not only trucking space but also guarantees less set up time and labour. The RTS has a open bottom and can be used as pre rig truss for automated lighting features as moving heads. The truss wagon has been designed to swing (fold) up and keep a minimum of height loss. That means with a wagon height of 680mm, by swinging (folding) it up you create a minimum extra height of 229mm on top of the pre rig truss. This is a not only a bonus at show time but also if you store or transport the RTS Trusses empty. At alternative Truss Systems the wagons are separate which creates an extra storage problem or stacked in full height and that means you loose an additional 680mm on top of the self height of the truss structure. The new versatile RTS Truss is a rigger`s delight. Made with the fast connection system and approved according the DIN EN 1999-1-1 & 1999 -1-1/A2 within Eurocode 9 specifications by the TUV.

RTS-TRUSS

FACTS

• No loose dollies - no storage • Functional design and easy assembly • Saving trucking volume • Huge time and labor saver • High wear resistance • TuV approved • Swing & Roll Truss

CWT

RTS

PRT

Measurements RTS

Loadcases RTS upright

RTS

Span*

Main tube: Braces: Material: Connection: Weight incl. dolly:

inside: 750x 350mm outside: 800x 400mm 50x 3mm 25x 3mm / 50x 3mm EN AW-6082 T6 CS2-CON 21,5kg/m

2,4 6 10,8 13,2 15,6 18

UDL

CPL

kg/m

mm**

1996 389 108 67 43 28

2 18 58 87 123 165

2515 2 1168 14 584 48 440 74 333 106 250 146

Dolly system can be folded up and locked. Wheels can be taken off.

⅓ Point Load

¼ Point Load > Point Load

kg (2x)

kg (3x)

2273 3 876 18 438 59 330 89 250 125 187 167 * in mtr

1515 3 584 17 292 55 220 84 167 118 125 160

kg (4x)

1198 3 487 18 243 58 183 88 139 123 104 166

** mm is the deflection of the truss at the given load

RTS Pre Rig Swing Truss Designed for touring

RTS-SYSTEM

THE TRUSS WAGON

The RTS Truss wagon is designed for severe transport and can take rough rides. The RTS Truss has additional receivers on top and on the bottom of the truss structure for stacking two RTS Trusses on top of each other. It can be stacked and pinned for safety while loading and unloading. The RTS Truss wagon is equipped with 4 pcs of 100mm castors and the side bars are positioned low enough to hide and protect the lens of the moving head. In case a light designer wants the castors to be taken off, this is possible as the castors are double plated and can be unscrewed and removed. The RTS Truss with its economic dimension 400mm height and 800mm width enables each 800mm to fix a moving head and can have a safe free span of 18 mtrs.

1,30 m 2,40m 80,0 cm

40,0 cm

67,4cm

Measurements for RTS-System: Dimensions RTS Complete RTS Complete RTS Truss RTS Truss

Size (height x width) 1079 x 800mm in Transport Mode 674 x 1030mm in Hanging Mode 400 x 800mm outside Main Truss Body 350 x 750mm c.t.c. Main Truss Body

CWT

RTS

PRT

PRT Pre Rig Truss Multi versatile permanent load truss

Stackable space saver for touring:

PRT TRUSS PRT Truss is a versatile truss structure to carry moving heads permanently. No more flight cases and truss separate in your storage nor in your truck. It saves not only space but also guarantees less set up time and saves labor cost. The ultimate stackable space and cost saver for touring. The Pre Rig Truss has a measurement of 605mm width and 349 (399) mm height and comes in different lengths. The truss has fixed cross bracing in the sides and on the top side straight braces and a linear tube for centric positioning of the lights. The truss can be stacked with or without the dolly. The stackable dollies are adjustable in height by using telescopic legs and enables one person to do the stacking, tipping and inserting the legs. The ultimate Pre Rig Truss for Professionals on a Tour !

PRT-TRUSS

FACTS

• Touring truss for pre-adjusting Moving Lights • Movable and stackable • Saving trucking volume • Saving time and labor cost • Gentle fork connection • Dollies have telescopic legs • Dollies are stackable

CWT

RTS

PRT

Measurements inside: 555x 299mm PRT outside: 605x 399mm Main tube: 50x 4mm Braces: 25x 3mm / 50x 3mm Material: EN AW-6082 T6 Straight brace: 50x 50x 3mm square tube Material: EN AW-6060 Connection: Male/female forkends Weight: 16,9 kg/m

Loadcases PRT Span*

2 6 10 12 15 18

UDL

CPL

kg/m

mm**

1963 581 216 132 86 49

3 29 75 117 170 268

3086 3 1682 22 1055 61 806 97 632 142 449 229

⅓ Point Load

¼ Point Load > Point Load

kg (2x)

kg (3x)

2395 3 1142 26 783 75 604 119 474 173 336 272

1597 3 885 28 527 71 403 112 316 163 224 258

kg (4x)

1198 3 738 29 440 75 336 118 264 171 187 269

*PRT Dollie calculated to move PRT **Including lighting features

PRT Pre Rig Truss Minimizing storage- and cargo space

PRT-SYSTEM

PARTS

The PRT System has following parts: PRT-L*** Lengths PRT L=1,2m / 2,4m / 3,2m PRTD-L***Dollie PRT L=1,2m / 2,4m / 3,2m PRT-CON Fork Connector Male / Female * incl. positioning ring

ACC-PIN Locking pin 09/RS3 for PRT-CON + Clip Stackable dollie

605 mm

2440 mm

349 mm

200mm

1148,5 mm

610 mm

Measurements for PRT-System: Dimensions PRT Truss complete* PRT truss section PRT dollie

CWT

Size (height x width) 1149 x 610mm (min) 399 x 605mm 750 x 610mm (min)

1349 x 610mm (max) 349 x 605mm 950 x 610mm (max) **

RTS

PRT

Forkends are mounted with screwthread in the maintubes. Forkends can be adjusted and turned for vertical and horizontal use. * Dollie legs adjust in height: per 50mm

** Foldable for stacking

Corner Blocks MT / TT / XT / ST / XD Corner Blocks FT100 / FT50 Corner Blocks HD / FD4x Corner Blocks HD / FD3x Corner Blocks

Corner Blocks Corner Blocks for MT / TT / XT / FT100 and FT50 Multi Corner

MT I TT I XT I FT100 and FT50 1060mm

CORNER BLOCKS The Eurotruss corner blocks enables the creation of 2, 3, 4 way corners matching uniformly with the sleeve blocks of the ground supported towers.

MT-Corner Block: BLK-MT - 90° in 4 directions CS4-SCON - MT bold on screw ½ connector, 4x per direction *

The attachments are bolted to the corner blocks by using female bold on receivers. The corner block can be used in all configurations of 90 degree angles which makes it a handy and cost efficient product.

1010mm

The corner blocks are designed to be very rigid and therefore capable of taking 100% of the applied load in a vertical or horizontal direction. 58

TT-Corner Block: BLK-TT - 90° in 4 directions I CS3-BOB85 - TT / XT / FT / ST Bold on Receiver, 85mm, 4x per direction*

810mm

XT-Corner Block: BLK-XT - 90° in 4 directions I CS3-BOB85 - TT / XT / FT / ST Bold on Receiver, 85mm, 4x per direction* 28

986mm

58 0m m 0m m

531mm

Corner Blocks for MT / TT / XT / FT100 and FT50

FT100-Corner Block: BLK-FT100 - 90° in 4 directions I BLK-A-FT100 - FT100 Adapter for FT100-BLK, 1x per direction

85mm

FT50-Corner Block: BLK-FT50 - 90° in 4 directions I BLK-A-FT50 - FT50 Adapter for FT50-BLK, 1x per direction *4 pcs.required for one attachment

*BOBs come seperately

Corner Blocks Corner Blocks for ST, XD, HD / FD4x and HD / FD3x

ST I XD I HD/FD4x I HD/FD3x

510mm

CORNER BLOCKS

51 0 0m mm m

The Eurotruss corner blocks enables the creation of 2, 3, 4 way corners matching uniformly with the sleeve blocks of the 51 ground 68 0mm supported towers.

ST-Corner Block: BLK-ST - 90° in 6 directions CS3-BOB85 - TT/XT/FT/ST Bold on Receiver, 85mm, 4x per direction*

400mm

The corner blocks are designed to be very rigid and therefore capable of taking 100% of the applied load in a vertical or horizontal direction.

XD-Corner Block: BLK-XD - 90° in 4 directions CS2-BOB95 - XD Bold on Receiver, 95mm, 4x per dir.* ***

400mm

HD/FD44-Corner Block: BLK-44 - 90° in 6 directions I CS1-BOB100 HD/FD Bold on Receiver, 100mm, 4x per dir.*

290mm

29 0m m 0m m

50 mm 0m m

HD/FD42 (32)-Corner Block: CS1-BOB100 / 105 - HD/FD42 Bold on Receiver 100mm I HD/FD32 Bold on Receiver 105mm *4 pcs.required for one attachment

**BOB⁹s come seperately

***XD Multicorners have a horizontal XD attachment as the upper and down attachment is FD34

Corner Blocks for ST / XD and FD4x / FD3x

50 m 0m m m

290mm

400mm

HD/FD34-Corner Block: BLK-34 - 90° in 6 directions CS1-BOB105 / A210 - HD/FD34 Bold on Receiver 105mm - 4 pcs per att. or 210mm adapter - 1 pce per att.

Photo: ÂŠRalph@Larmann.com

Circles For all Systems

Circles and Curved Truss

Highest accuracy for perfect fitting:

CIRCLES AND CURVED TRUSSES Eurotruss manufactures circles and curved trusses. These curved trusses are made with full accuracy which guarantees a perfect fitting. All curved parts are made with special tools ensuring that all parts are identical. Every curved segment of a circle is fully interchangeable. Eurotruss offers a broad range of circles and curved trusses from FD33 till ST Series in various diameters and degrees. The number of curved parts is depending on the maximum length of each segment. The maximum length per segment may not exceed 5,5m. Eurotruss advises the purchase of an even number of parts (2, 4 or 8 parts) in order to obtain full flexibility and exchangeability with standard lengths and corner elements.

Circles and Curved Truss

Further it is advisable to check upon load bearing capacity as a circle or curved structure needs to be calculated differently.

Circle Parts:

Number of segments X:

Diameter x 3,14 5,5 Meter

The number of parts of a circle depends on the diameter: The number of parts of a circle depends on the diameter of the circle as well as the maximum length of the tube we can bend, which is 5,5 mtr.

Example: FD34 Circle with a diameter of 8 meter Number of Segments: 8 mtr x 3,14 = 25,12 25,12 : 5,5 = 4,57

You can calculate your needed units of segments with this sheme:

Minimum number of segment is: 5

CIRCLES

ELEMENTS

Eurotruss advises the purchase of an even number of parts (2, 4 or 8 parts) in order to obtain full flexibility and exchangeability with standard lengths and corner elements. S-Shape

See here some examples of various shapes which are possible. As a quarter circle segment can be regarded as a big 90째 Corner various structure opportunities appear.

90째

1/4 Circle

Length X Ou ts

i de

Dia me ter

id Ins

am Di

er et

90째

Oval

Circle

The load bearing capacity of a circle is only valid when the circle will be hung horizontally:

Length X:

Diameter x 3,14 Nr. of Hanging Points

Load Capacity per = Hanging Point:

Total Load Capacity:

Div. Load in KG of Length X 5

Load Per Hanging Point

Number of Hanging Points

Circles and Curved Truss

Load Capacity of a Circle:

Accessories CS1-… = Accessories HD/FD System CS2-… = Accessories XD System CS3-… = Accessories TT / XT / FT & ST System CS4-… = Accessories MT System

Accessories Connectors and pins for CS3, CS2 and CS1 systems

TT / XT ST / FT

CS3-CON Connector (Spigot)

CS3-TP + CS3-RS3 Trusspin + R-Clip 3mm

CS3-TPS + CS3-NUT Pin + Locknut M10

CS2-CON Connector (Spigot)

CS2-TP + CS3-RS3 Trusspin + R-Clip 3mm

CS2-TPS + CS3-NUT Pin + Locknut M10

CS1-CON Connector (Spigot)

CS1-TP + CS1-RS2 Trusspin + R-Clip 2mm

CS1-TPS + CS1-NUT Pin + Locknut M8

Connectors and Pins

HD FD

SPACERS

CONNECTORS AND PINS All Eurotruss connectors are made accordingly the highest quality standard. Eurotruss only uses the aluminium quality EN AW-6082 T6 for the connectors.

All Eurotruss connectors are engraved with the Eurotruss logo and name to check the originality. The Truss Pin is made of high tensile steel, 42 CrMo 4, which prevents deformation and can absorb higher loadings.

In various designs and constructions like Ground Supports, spacers are required. Spacer get the matching size without compromising the usage of standard elements.

All CAD-Sizes are in mm

Accessories Spacers, Bold on Receivers and Scons for all Systems

SPACER

CS2-CON40 XD-Spacer, X=40mm

CS1-CON15 / 30 /50 /80 HD/FD-Spacer, X = 15, 30, 50, 80mm

CS1-BUS90 / 105 HD/FD-Adapter, X = 90 mm, 105 mm

BOLD ON RECEIVER

CS3-BOB85 TT / XT / FT and ST-Bold on Receiver 85mm

CS2-BOB95 XD-Bold on Receiver 95 mm

CS1-BOB100 Bold on Receiver, 100mm for BLK-44 (Corner Block)

CS1-BOB105 Bold on Receiver, 105mm for BLK-34 (Corner Block)

SCONS

CS4-Scon Bold on Screw Â˝-Connector for MT

CS3-Scon35 TT / XT / ST / FT Bold on Connector M12

CS2-Scon35 XD Bold on Connector M12

Eurotruss supplies various kinds of bold on receivers. The screw in bold on receivers (connectors) in FD and XD System which are being used on all kind of plated products like totem, adapter plates and the swivel corner / base.

SCONS The other bold on receivers are to be used on corner blocks to make the various attachments.

The screw in half connectors (Scons) in FD and XD System which are being used on all kind of plated products like totem, adapter plates, book corners and the swivel corner / base. Both Scons have a M12 Thread inside.

All CAD-Sizes are in mm

Spacer, Bold on Receiver and Scons

BOLD ON RECEIVERS

CS1-Scon25 HD/FD Bold on Connector M12

Accessories Connectors and pin for CS4 I Hinge Connection for all HD / FD Systems

CS4-CON Connector (Spigot)

CS4-TP + CS4-RS6 Trusspin + R-Clip 3mm Example FD34 Connection with usage of hinges

R CS1-HS L/R HD / FD Hinge Set (single tube), L=100mm

Connectors and Pins

and Hinge Connection

CS1-Pin01 Pin 16 mm for HS and hinges

CS1-HSP-M L Hingepart male left for HD, FD Serie

CS1-HSP-F L Hingepart female left for HD, FD Serie

CS1-HS-Bo M Hingepart Bold on male for HD, FD Serie

CS1-HS-Bo Hingepart Bold on female for HD, FD Serie

CS1-DB340 Distance Bar for Hinge Part 90째: 390mm

CS1-DB241 Distance Bar for Hinge Part 120째: 291mm

CS1-DB184 Distance Bar for Hinge Part 135째: 234mm

HINGE CONNECTIONS The hinge sets, mainly used as hinges in towers, are also usable to make various shapes with standard lengths. With pre-fixed distance bars you can make 90 dgr., 120 dgr. and 135 dgr. corners. See the example above for more details. The hinge sets are available for HD/FD and for ST System.

The hinges for ST System are mainly designed for hinging the tower and to be used in combination with TD50 Tower. The variable connection set can be used to make any angle between 0 dgr. and 180 dgr and can only be used with square truss.

All CAD-Sizes are in mm

Accessories Base Plates for all HD / FD Systems

PLB-44 Base Plate

PLB-43 Base Plate

PLB-42 Base Plate

PLB-34 Base Plate

PLB-33 Base Plate

PLB-32 Base Plate

For each Truss System Eurotruss supplies a base plate. The base plate is an aluminium plate with fixed welded receivers on it.

The plate is for FD System 6mm thick and for heavier truss systems 8~10mm thick.

A base plate can also be used as a wall plate or end plate.

All CAD-Sizes are in mm

Base Plates for all HD / FD Systems

BASE PLATES

Accessories Totem Plates for all HD / FD Systems

Detail А(8х)

PLB-MH-L Adapter Plate Large, excl. CS1-Scon25

Detail А(4х)

PLB-MH-S Adapter Plate Small, excl. CS1-Scon25

Typical (10х)

PLB-TOTEM Totem Base Plate. Ø = 99cm, 80kg, excl. CS1-Scon25

Totem Plates

TOTEM

The Totem is a round steel base plate with a diameter of 99cm with easy handles and pre-drilled holes for all HD/FD Truss Series. The totem is strong, elegant and the perfect plate for stand alone beams. The totem can also be used to mount a moving head (any brand) on a top plate.

In order to secure the moving head, it is adviseable to use a special adapter plate including a spacer set with locking device to fixate the moving head. Not only is the adapter plate the right tool for fast and safe fixation of your moving head, it can also absorb the heat generated by the moving head without deforming.

CS1-Scon25 HD/FD-Bold on Connector M12

The adapter plates are available in two sizes and equipped with pre-drilled holes to match all moving heads. Both Totem Plate and Adapter Plate are exclusive the required HD/FD Scon25, half connector with M12 Thread. Depending on triangular or square truss additional 3 or 4 HD/FD-Scon25 may need to be ordered as extra. All CAD-Sizes are in mm

Accessories Couplers and Joints and Gripping Material for all HD / FD Systems

DC-DC Swivelcoupler

DCDC-TD Double Swiveljoint

112

112 50

DC-DC-F 90° Fixed Coupler

DC-DC-P Parallel Coupler

DC-HC Halfcoupler

DC-SC Halfcoupler Slimline

DC-HC-SE Halfcoupler »side entry«

DC-SC-SE Halfcoupler Slimline »side entry«

GRIPPING MATERIAL Gripping Material

Eurotruss carries a broad range of couplers, clamps, hook on bars, stabilizer bars and hanging bars. A good solution for using couplers with truss constructions is the side-entry coupler as the lid has a wide angle which provides more space tolerance.

All CAD-Sizes are in mm

Accessories Hanging Adapter for conical systems

DCB8-PF TT Truss Hanging Adapter

520 590

DCB7-PF XT Truss Hanging Adapter

520 590

DCB5-PF ST Truss Hanging Adapter

DCB4-PF HD/FD4X Truss Hanging Adapter

Hanging Adapter for all Systems

HANGING ADAPTER

Special steel hanging adapter to absorb the required load. The hanging bars perfectly match the truss systems requirements. The hook on bars are available in various lengths and with various wall thicknesses. All CAD-Sizes are in mm

DCB3-PF HD/FD3X Truss Hanging Adapter

DCTV3-PF Truss Adapter TV, Swivel

DC-TV Half Coupler with TV Spigot

DC-PF One Point Hanging Adapter

HANGING ADAPTER Hanging Adapter for all Systems

Accessories Bold on Twist joints - Stabillizer and Hook on Bars

CS2-DC13 XD Bold on Twist Joint 13cm - to make T-joint i.c.w. XD Sleeve Blocks CS2-DC21 XD Bold on Twist Joint 21cm - to make T-joint i.c.w. XD Corners

„X“

CS1-DCX HD / FD Bold on Twist Joint X = 10 / 10,5 / 12 / 14 / 21cm *usage of 50mm half coupler side entry

CS1-DCXS HD / FD Bold on Twist Joint, Slimline X = 10 / 10,5 / 12 / 14 / 21cm *usage of slimline 30mm half coupler side entry

CS1-DC10 - Bold on Twist Joint 100mm -to make T-joint i.c.w. HD/FD44 Corners

CS1-DC10S - Bold on Twist Joint 100mm / 3,94in - to make T-joint i.c.w. HD/FD44 Corners

CS1-DC10,5 - Bold on Twist Joint 105mm - to make T-joint i.c.w. HD/FD34 Corners

CS1-DC10,5S - Bold on Twist Joint 105mm (4,13in) - to make T-joint i.c.w. HD/FD34 Corners

CS1-DC12 - Bold on Twist Joint 120mm - to make T-joint i.c.w. HD/FD34 Sleeve Block

CS1-DC12S - Bold on Twist Joint 120mm (4,72in) - to make T-joint i.c.w. HD/FD34 Sleeve Block

CS1-DC14 - Bold on Twist Joint 140mm - to make T-joint i.c.w. HD/FD44 Sleeve Block

CS1-DC14S - Bold on Twist Joint 140mm (5,51in) - to make T-joint i.c.w. HD/FD44 Sleeve Block

CS1-DC21 - Bold on Twist Joint 210mm - to make T-joint i.c.w. HD/FD34 Corners

CS1-DC21S - Bold on Twist Joint 210mm (8,27in) - to make T-joint i.c.w. HD/FD34 Corners

KCKC-X Bold on Corner Brace 70/ 140/ 200/ 300cm All lengths available

Bold on Twist joints

Stabilizer and Hook on Bars

HCHC-X Hook on Bar 100/ 200/ 300cm All lengths available

BOLD ON TWIST JOINTS

STABILIZERS AND HOOK ON BARS

Eurotruss supplies prefixed bold on twist joints which can be used as a T-connection. The sizes do match with standard T-joints in standard rigs and ground supported rigs. The slime line version has the advantage that it requires less mounting space as sometimes the braces of the attached truss can be in the way.

Bold on Corner braces are available in various lengths and required in the Ground Supports and Riggs which exceeds a height of 6m. The hook on bar is available in various lengths and with various wall thicknesses.

All CAD-Sizes are in mm

Rigging Accessories Rigging Accessories for ground supported Systems

SC-SFC01/02/03 Safety Cable, 12mm 蘯ジWL 2t Lengths 29, 70, 100cm

SC-STC12-100/200 Steel Wire with PVC Cover WLL 2t Lengths 100, 200cm

SC-CH-01/02 Various variable Chainsets for towers available

SC-TB-* Various Turnbuckles available

RT-AS-2T / 3,25T / 4,75T Shackles with bolts and screw collar

RT-RS2-1/2/3 Round Sling, WLL 2t, Lengths 1, 2, 3m

RT-SB5-12/15/25 Ratchet Span Band, WLL 5T Lengths 12,15,25m

RT-OR-2T/3T O-Ring, WLL 2t/3t

RT-RSS2-1/2/3 Round Sling with Steel Wires, WLL 2t, Lengths 1, 2, 3m

Eurotruss carries a range of rigging accessories which are required on ground supported towers and structures as roof systems. Eurotruss selected hardware for extra safety, dead hanging, rigging and guy wiring. All items meet the working load requirements and safety standards.

Rigging Accessories

RIGGING ACCESSORIES

Ground Support Towers TD50 I TD44 I TD35 -Tower HD/FD34 Tower LED Bridge Sound Tower ST Sound Tower HD44 Sound Tower HD34

Tower Overview Overview of EurotrussÂ´ Tower Systems

EUROTRUSS TOWER Eurotruss has developed a range of various Tower Systems all based on standard truss series. A tower system is a vertical truss with a movable sleeve block for the connection of horizontal beams (rig) with a head section (top part) for electrical / manual chain hoists, on most of the occasions a this involves a basement and a hinge system for erecting the tower. The big advantage of towers are the movable sleeve blocks which allows you to mount all cables, lighting features etc on the ground and then lift all up by electrical and / or manual chain hoists. This saves a lot of time and assures safe working circumstances. When the complete rig has been lifted in position, the rig can be secured by mounting a safety between the top section and the sleeve block. All tower elements are well designed and composed to offer maximum flexibility, strength and versatility when using the towers in bridges, ground supported systems and complex outdoor structures like roof systems. These ground supported towers are available in four types, the HD/FD34 Tower to be used in combination with the HF/FD and XD Series, the TD35 Tower to be used in combination with ST Series, the TD44 Tower and the TD50 Tower to be used in combination with MT, XT, TT and FT100 Series. A very high demand nowadays is for a single span (Bridge) on two towers to support a LED Screen. A LED Screen has not only a huge self weight but creates also a closed surface which causes big wind forces. Hanging a LED Screen on a single span needs to be recognized as a complex structure to avoid dangerous hazards.

GS-Towers Overview

For this reason Eurotruss developed two standard LED Bridges to offer a full safe, engineered system. The LED Bridges are available in TD35 Towers with ST Truss for Screens from 12m2 till 24m2 up to a height of 7,5m and also for the bigger screens from 28m2 till 54m2 with a height of 10m the TD44 Tower with TT Truss.

As with the Eurotruss Tower range, the towers can be used up to 20m height. At this height it is no longer safe and possible to erect the tower by manual force. For this Eurotruss developed the Tower Erecting System which is a simple, fast and easy tool to erect the tower. Next to the Ground Support Towers Eurotruss offer the stand alone Sound Towers. The Sound Towers are all based on a V-shaped basement in order to have an angled mast to hang the PA cluster in the right position. The Sound Towers are available in three types from 700kg till 1.200kg centre point load and a height of 7,5m till 13m.

Ground Support Tower Overview Overview of EurotrussÂ´ Ground Support Tower Systems

GROUND SUPPORT TOWERS The newly developed TD Tower Truss Series (Mast Sections) are based on the standard truss lengths but with a ladder brace on one side for safe climbing and with thicker tube walls for enhanced vertical load capacity. The TD Tower Truss can also be used as horizontal beams which give the TD Series a more flexible character which fits perfectly in the Eurotruss Range and its Philosophy.

The TD44 Tower with a maximum height of 16m with a load capacity of 3.000kg and the TD35 Tower with a maximum height of 14m with a load capacity of 2.000kg .

In the TD Tower Series the following three Tower Systems are available; The TD50 Tower with a maximum height of 20m and a load capacity of 8.000kg.

Naturally the well known HD/FD34 Tower completes the total range of ground support tower systems. Look at pages 84-91 for the detailed information of each of the GS Towers.

TD35

TD50

HD/FDFD34

TD44

TD50 GROUND SUPPORT TOWER Max. overall height: Truss sections used:

20m 8t TD50

Sleeveblock:

MT, TT, XT, FT

Self Weight:

130kg

16m

Max. overall height: Max. loading capacity: Truss sections used: Sleeveblock : Self Weight:

TD35 GROUND SUPPORT TOWER 3t

TD44

Max. overall height: Max. loading capacity: Truss sections used:

HD/FD34 GROUND SUPPORT TOWER 14m 2t

TD35

12m

Max. overall height: Max. loading capacity:

Truss sections used: HD/FD34

TT, XT, FT, HD44

Sleeveblock:

HD/FD34, HD/FD44, XD

130kg

Self Weight:

105kg

Self Weight :

65~85kg

GS-Towers Overview

Max. loading capacity:

TD44 GROUND SUPPORT TOWER

Tower Erecting System / LED-Bridge Overview of Eurotruss´ Tower Erecting System and LED Bridge

TOWER ERECTING SYSTEM The Eurotruss Tower Erecting System is developed as an additional tower product for the erection of the TD-Tower masts. It is a portable system that can be put up fast and safe. For each System a different Tower Erecting System can erect masts up to various heights. The Tower Erecting System is constructed as a main frame and several loose tubes to be connected as a triangular shaped construction. The Tower Erecting System is placed on the sleeve block and on the truss which is fixed with the help of ratchet straps. The main frame has a pulley at the top, through which the chain of the hoist is guided. By attaching the hoist to the base section and the hook of the chain to the mast the tower can be erected easily. In general the Tower Erecting System is very easy to mount and demount: Including erecting a tower it takes 20 minutes per tower. For each Tower Erecting System one rigging hoist (1 Ton) and two sets of ratchet straps are necessary. A necessity for all towers being erected over 10 to 12 meters height. • TES50 Tower Erecting System for TD50 Tower & MT / TT / XT Main Rig • TES44-1 Tower Erecting System for TD44 Tower & TT / XT Main Rig • TES44-2 Tower Erecting System for TD44 Tower & FT Main Rig • TES35 Tower Erecting System for TD35 Tower & ST Main Rig

*Tower Erecting Systems for TD44/ TD50 Towers & Folding Truss Main Rigs on request *The TES is exclusive of rigging hoists and ratchet straps.

LED BRIDGE More and more LED Screens are being used in all kind of events. Not only LED Screens are being used at concerts nowadays but at all kind of events and promotional activities. LED Screens have a huge self weight hung on a few point loads and have a large closed surface. In the outdoor venues due to huge wind forces and multi point loads it is extremely important to choose the right system which can facilitate these forces. Eurotruss has developed two standard LED Bridges. Each LED Bridge is a two tower system of which the size and load capacity match all the requirements for standard available LED Screens from 12m2 till 54m2. These Eurotruss tower systems are the standard Eurotruss Towers TD44 with TT horizontal truss span and TD35 with ST horizontal truss span.

• LED-BR-01 LED Bridge: TD35 Towers and ST Truss Span. For LED Screens from 12m2 till 24m2 with a maximum load of 1800kg. LED-Bridge

Tower Erecting System

Standard components in the towers and standard truss lengths make these LED bridges extremely profitable and no special truss construction is required.

• LED-BR-02 LED Bridge: TD44 Towers and TT Truss Span. For LED Screens from 28m2 till 54m2 with a maximum load of 4050kg. *The LED Bridges are exclusive of rigging hoists **For each LED Bridge a Structural Report is available.

Sound Tower - Overview Overview of EurotrussÂ´ Sound Tower Systems

SOUND TOWERS The Eurotruss Sound Towers are in principal stand alone towers to erect and support big PA Clusters or Screens at a given optimum height. The Sound Towers are all designed and calculated to perform in the outdoor scene. For each PA size and self weight, Eurotruss

offers a matching Sound Tower solution which is easy and safe to set up, self erecting PA and cost and space effective. The design of the Sound Towers are all based on the V-shaped basement to have an angled mast to hang the PA Cluster in the right position. Each Sound Tower

requiresballast depending on the self weight and size of the PA Cluster. A structural report for each of the Sound Towers is available. Eurotruss carries three Sound Tower Systems from 700 kg till 1.200 kg load with a height of 7,5m till 13m.

Sound Tower HD34 7,5m

Sound Tower HD44 10,5m

Sound Tower ST 13m

Sound Tower ST

Sound Tower HD44

Sound Tower HD34

Max. overall height :

13,28m

Max. overall height :

10,84m

Max. overall height :

7,94m

Max. lifting height:

13,00m

Max. lifting height:

10,50m

Max. lifting height:

7,50m

Max. loading capacity:

1.200kg

Max. loading capacity:

800kg

Max. loading capacity:

700kg

1.240kg

Necessary Ballast:

500kg

Necessary Ballast:

8Bft D 70km/h

Max. windspeed

8Bft D 70km/h

Max. windspeed

510kg 8Bft D 70km/h

Max. surface frontload:

7,5m2

Max. surface frontload:

4,5m2

Max. surface frontload:

7,5m2

Max. surface sideload:

5,5m2

Max. surface sideload:

3,3m2

Max. surface sideload:

5,5m2

Truss sections used:

ST, FD/HD33

Truss sections used:

HD44

Truss sections used:

HD34

Groundarea length:

7,65m

Groundarea length:

5,01m

Groundarea length:

7,65m

Groundarea width:

6,98m

Groundarea width:

5,42m

Groundarea width:

6,98m

Sound Towers Overview

Max. windspeed

TD50 TOWER The heavy duty 50cm for ground supported MT, TT, XT, FT100 and Roofs

Heavy Duty – for all Trusses

TD50 TOWER Eurotruss adds to the existing TD35 and TD44 the TD50 Tower System. The new tower is designed for extreme heights and high loads.

TD50 Tower

The TD50 Tower System in combination with TT Truss can go up 20 meters and handle 8000 kg.

TOP SECTION:

TOWER TRUSS:

HINGE SET:

A 2 Ton double chain hoist Top Part with 4 wheels for high load bearing. The Top Part has integrated pick up points for »dead hanging«.

The mast sections have dimensions of 510x510mm. The main tube is 60x5mm and the braces are 30x3 mm. One side has additional ladder braces (40mm) for easy and safe climbing.

A strong and cost effective solution to erect the TD50 Tower. The hinge sets are half connectors with a hinge fork which allow high vertical load. 4 Hinges are required per tower.

TD50 TOWER

Top Section

FACTS

Max. Height: 20m Max Loading: 8.000 kg Tower Truss: TD50 Sleeve Block: MT, TT, XT, FT100 Self Weight: 130 kg

TOP50-1

MT Sleeveblock

BLK-SB-MT XT Cornerblock-Sleeve

Tower Truss

TD50-L* CS4-Scon Receiver MT Truss

SL-AD-TTH Sleeveplate Up

TT Sleeveblock

SL-SLAD-FT100 FT100 Adapter for FT100 Cornerblock

Hinge Set CS0-HS L/R Hinge Set

BLK-SB-TT TT Cornerblock Sleeve

STAB-03 Stabilizer

Base

OUTR-S03 Short Outrigger

SL-AD-TT Sleeveplate Down

BASE-03 Steel Base on wheels

OUTR-L03 Long Outrigger

OUTRIGGERS:

SLEEVE BLOCK:

Available Outriggers for TD50 Base:

BASE SYSTEM:

OUTR-S03

Short Outrigger

A Steel Base on wheels with short or long outriggers in combination with stabilizer bars.

OUTR-L03

Long Outrigger

STAB-03

Stabilizer Bar for Long Outrigger

*4 pcs. required for one attachment

TD50 Tower

The sleeve block is a MT/TT/XT corner block with usage of 2 bolted sleeve plates. These blocks make it possible to fit the MT/TT/XT/FT100 Truss to all 4 sides by using bolted receivers. The upper plate is equipped with an integrated pick up point.

CS3-BOB85 Receiver 85mm*

TD44 TOWER The heavy duty 40cm for ground supported TT, XT, FT, HD/FD44 and Roofs

The Tower for most Trusses

TD44 TOWER The TD44 Tower makes for an excellent vertical truss that allows the safe, quick lifting of regularly loaded horizontal HD/ FD44, FT, XT and TT Truss Rig and Roofs to their service height.

TD44 Tower

In terms of static, the TD44 Tower is designed for a high flexural- and pressure strain. Especially due to a roof this high, flexural strain is required.

TOP SECTION:

TOWER TRUSS:

HINGE SET:

A new multifunctional top part for use of manual chain hoist as well as motorized hoist has been redesigned and built stronger.

TD44 Tower Truss is a square 40cm heavy duty truss with one on side integrated horizontal bracing for safe and easy climbing. Naturally this TD44 Truss has been made according DIN EN 1999-1-1 & 1999 -1-1/A2 within Eurocode 9 and approved by TuV.

A strong, safe and cost effective solution to erect the TD44 Tower. The hinge sets are 100mm long. Those half connectors with a hinge fork allow a very high vertical load. 4 Hinge sets (2 left and 2 right) are required per tower.

TD44 TOWER

Top Section

Max. Height: Max Loading: Tower Truss: Sleeve Block: Self Weight:

TOP44-01

FACTS

16m 2.000 kg TD44 TT, XT, FT100, HD44 130 kg

XT Sleeve Block

SL-AD-XTH Sleeveplate Up

BLK-SB-XT ХТ Cornerblock Sleeve

TD44-L***

Tower Truss

SL-AD-XT Sleeveplate Down

CS3-BOB85 Receiver 85mm*

TT Sleeve Block SL-AD-TTH Sleeveplate Up

SL-SLAD-FT100 FT100 Adapter for FT100 Cornerblock

Hinge Set CS1-HS L/R Hinge Set

Base

OUTR-S02 Short Outrigger

BLK-SB-TT TT Cornerblock-Sleeve

BASE-02 Steel Base on wheels

SL-AD-TT Sleeveplate Down STAB-02 Stabilizer

CS3-BOB85 Receiver 85mm* OUTR-L02 Long Outrigger

SLEEVE BLOCK:

BASE: The upper sleeve plate is equipped with an integrated hanging point. The standard HD/FD44 sleeve blocks have predesined welded receivers on 3 sides.

Steel Base on wheels available with short outriggers and long outriggers in combination with stabilizer bars.

TD44 Tower

Standard sized XT and TT corner blocks with usage of 2 bolted sleeve plates guarantees a perfect geometric rig. These blocks make it possible to fit the TT / XT / FT100 Truss to all four sides mby using bolted receivers.

TD35 TOWER The heavy duty 35cm Tower for ground supported ST and Roofs

The ST Support Tower

TD35 TOWER The TD35 Tower makes for an excellent vertical truss that allows the safe, quick lifting of regularly loaded horizontal ST Truss Rig and Roofs to their service height. In terms of static, the TD35 Tower is designed for a high flexuraland pressure strain.

TD35 Tower

Especially due to the roofs this high flexural strain is required.

TOP SECTION:

TOWER TRUSS:

HINGE SET:

A new multifunctional top part for use of manual chain hoist as well as motorized hoist has been redesigned and built stronger.

TD35 Tower Truss is a square 35cm heavy duty truss with one on side integrated horizontal bracing for safe and easy climbing. Naturally this TD35 Truss has been made according DIN EN 19991-1 & 1999 -1-1/A2 within Eurocode 9 and approved by TuV.

A strong, safe and cost effective solution to erect the TD35 Tower. The hinge sets are 100mm long. Those half connectors with a hinge fork allow a very high vertical load.4 Hinge sets (2 left and 2 right) are required per tower.

TD35 TOWER

Top Section

Max. Height: Max Loading: Tower Truss: Sleeve Block: Self Weight:

TOP35-1

ST Sleeve Block

FACTS 14m 2.000 kg TD35 ST 105 kg

SL-AD-STH Sleeveplate Up

Tower Truss

BLK-SB-ST ST Cornerblock-Sleeve

TD35-L**

SL-AD-ST Sleeveplate Down CS3-BOB85 Receiver 85mm*

Hinge Set CS1-HS L/R Hinge Set

Base

OUTR-S02 Short Outrigger

BASE-02 Steel Base on wheels STAB-02 Stabilizer OUTR-L02 Long Outrigger

SLEEVE BLOCK:

BASE: The upper sleeve plate is equipped with an integrated hanging point.

Steel Base on wheels available with short outriggers and long outriggers in combination with stabilizer bars.

TD35 Tower

Standard sized ST corner block with the usage of 2 bolted sleeve plates guarantees a perfect geometric rig. These blocks make it possible to fit the ST Truss to all four sides by using bolted receivers.

HD/FD34 TOWER The basic 30cm Tower for ground supported HD/FD44, HD/FD34, XD and Roofs

The Basic Tower

HD/FD34 TOWER The ground support tower HD/FD34 makes for an excellent vertical truss that allows the safe, quick lifting of regularly loaded horizontal truss constructions (riggs) and small to medium-sized platform roofs to their service height. The straight elements of the tower consist of HD/FD34 Standard Truss, allowing a variety of combinations. This system is compatible with the type HD/FD34 Basement (Touring, Professional and Small Base), Hinge Section, Sleeveblock and Top Section.

In terms of statics, ground support towers, indoor applications, are exposed to negligible flexural strain but primarily to pressure strain. In outdoor use, on the other hand, the tower is exposed to very high flexural strain due to the coverings or roof.

HD/FD34 Tower

FD34-BPR Professional Base

FD34-BPTR Touring Base

TOP SECTIONS:

SLEEVEBLOCKS:

HINGE SET:

FD34 Top Sections are available for manual or electrical chain hoist.

FD34 Sleeves are available with various attachments and suitable for several truss types, strong and safe with perfect chosen dimensions to combine standard truss elements.

A strong, safe and cost effective solution to erect the HD/FD34 GS Tower. The hinge sets are 100mm long. Those half connectors with a hinge fork allow a very high vertical load. 4 Hinge sets (2 left and 2 right) are required per tower.

(Recommendation: always use a safety cable (between top section and sleeve block)

Top-Section

HD/FD34 TOWER FACTS Max. Height: Max Loading: Tower Truss: Sleeve Block: Self Weight:

TOP34-CH1 Top Part for Motors

TOP34-MH Top Part for manual chain hoist

FD34-SB3 FD34 Sleeveblock

Sleeveblock

12m 1.000 kg HD/FD34 XD, HD/FD34 65 ~ 85 kg

FD34-SB3-XD/C FD34 Sleeveblock XD / FD34

Hinge Set CS1-HS L/R Hinge Set

BASE-01 Steel Base

BASE-01 Steel Base STAB-01 Stabilizer (not shown)

Base:

OUTR-S01 Short Outrigger

OUTR-L01 Long Outrigger

OUTRIGGERS:

ACCESSORIES:

FD34 Touring base is identical to the professional base but with integrated short outriggers (4 per Touring Base).

The outriggers are available in short outriggers and long outriggers in combination with stabilizer bars and it depends on the purpose when which to use. At Outdoor Ground Supports, Roofs, Bridges or High Indoor Ground Supports the usage of long outriggers are to be advised.

Next to the standard parts Eurotruss supply additional accessories, which can be demanded for different usage.

FD34 Steel base on wheels available with short outriggers or long outriggers in combination with stabilizer bars.

For stability Eurotruss carries three different outriggers. To obtain more stability in the rig, bold on cornerbraces are available.

HD/FD34 Tower

BASES:

LED Bridge

Single Truss Span for LED Screens

LED BRIDGE Eurotruss designed two standard LED Bridges to fly an LED Screen. The load bearing capacity is calculated and guaranteed for Screens till 54m2 with a maximum load of 4050 kg. The two LED Bridges are based on standard TD44 / TD35 Towers with TT / ST Horizontal Truss.

LED Bridge

Technical Specifications:

LED-BR-01 Towers: Horizontal Truss: Height: Clearance: Load Capacity: Guy Wiring:

LED Support Structure Screens till 24m2 TD35 ST Truss 7,5 m 6,5 m 1800 kg necessary * excl. rigging hoists

LED-BR-02 Towers: Horizontal Truss: Height: Clearance: Load Capacity: Guy Wiring:

LED Support Structure Screens till 54m2 TD44 TT Truss 10 m 8,5 m 4050 kg necessary * excl. rigging hoists

Sound Tower ST 1.200 kg on a height of maximum 13m

ST-ST-TKT Top-Part

Sound Tower for light duty

SOUND TOWER ST Eurotruss designed the ST Sound Tower in order to fly heavy duty PA System. The load bearing capacity is 1200 kg on a maximum height of 13m. The V shaped Sound Tower is based on standard ST and HD33 Truss elements. ST-ST-MSC Mid-Section

ST-ST-SFR Support attachment right

ST-ST-SFL Support attachment left

ST-ST-BSE Central Base

ST-ST-BS Base Spindle (12x)

Max. overall height: Max. lifting height: Max. loading capacity: Necessary ballast: Max. windspeed:

13,28 m 13,00 m 1200 kg 1240 kg 8Bft G 70km/hrs

Max. surface frontload: Max. surface sideload: Truss sections used: Groundarea length: Groundarea width:

7,5 m2 5,5 m2 ST / HD33 7,65 m 6,98 m

Sound Tower ST

Technical Specifications:

Sound Tower HD44 800 kg on a height of maximum 10,50m

HD44-ST-TKT Top-Part

Sound Tower for medium duty

SOUND TOWER HD44 Eurotruss designed the HD44 Sound Tower in order to fly medium duty PA System. The load bearing capacity is 800 kg on a maximum height of 10,50m. The V shaped Sound Tower is based on standard HD44 Truss elements.

HD44-ST-MSC Mid-Section

HD44-ST-SUP Support-Beam

HD44-ST-BSE Central Base

HD44-ST-FBR Frontbase right

Sound Tower HD44

HD44-ST-FBL Frontbase left

Technical Specifications:

Max. overall height: Max. lifting height: Max. loading capacity: Necessary ballast: Max. windspeed

10,84 m 10,50 m 800 kg 500 kg 8Bft - 70km/hrs

Max. surface frontload: Max. surface sideload: Truss sections used: Groundarea length: Groundarea width:

4,5m2 3,3m2 HD44 5,01m 5,42m

Sound Tower HD34 700 kg on a height of maximum 7,5m

Sound Tower for light duty

SOUND TOWER HD34 HD34-ST-TKT Top-Part

Eurotruss designed the HD34 Sound Tower in order to fly light duty PA System.

The load bearing capacity is 700 kg on a maximum height of 7,5m. The V-shaped Sound Tower is based on standard HD34 Truss elements.

HD34-ST-MSC Mid-Section

HD34-ST-SUP Support-Beam

HD34-ST-BSE Central Base

HD34-ST-SPL Support Attachment left

HD34-ST-FBS Frontbase

Max. overall height: Max. lifting height: Max. loading capacity: Necessary ballast: Max. windspeed

7,94m 7,50 m 700 kg 510 kg 8Bft - 70km/hrs

Max. surface frontload: Max. surface sideload: Truss sections used: Groundarea length: Groundarea width:

3 m2 2,5 m2 HD34 3,97 m 4,00 m

Sound Tower HD34

Technical Specifications:

HD34-ST-SPR Support attachment right

Fork End Truss Maxi Beam Nova Beam GS Truss Mini Beam Tower Fork Accessories

SYSTEM OVERVIEW Fork end truss General overview of the Eurotruss Fork End Truss

WHICH TRUSS FOR WHICH PURPOSE ? This overview categorizes all the various Fork End truss series all well known for their rigidity and high load bearing capacity. Each truss series has its own unique specifications and purpose but all with the same fork connection system. In the range of the Fork End truss systems we list two major Series, Maxi and Heavy Truss. Naturally Eurotruss carries a range of circles (<not shown>) and accessories which you will find in this catalogue.

TUV APPROVAL Eurotruss Aluminium Fork End Truss Series have also the TuV Approval (Bau Art Prufung). All given load charts are fully approved by the TuV and all truss series are made according the DIN EN 1999-1-1 & 1999 -1-1/A2 within Eurocode 9 specifications.

Fork Heavy Serie : GS / MB Maintube : 48,4x4,47 mm Bracing : 25x3 mm Material : EN AW-6082 T6 Weight : 11,5 / 10,5 kg / mtr For loading contact us or the nearest dealer Eurotruss BV • Castorweg 2 • 8938 BE Leeuwarden • The Netherlands Phone +31 (0) 58 215 88 88 • Fax +31 (0)58 215 81 11 • www.eurotruss.nl • info@eurotruss.nl

LABELLING Each trussing manufacturer should take responsibility for its responsibility and its duty to inform the user about the characteristics of that specific product. Eurotruss has always used labels which contain all the information necessary. Each product range has its own label and can bedistinguished by its colour. The label of the Fork End Truss Systems is Red.

THE ORIGINAL As the Eurotruss Fork End Truss Systems are being manufactured under license of and according the specifications of Slick, the MBX, NV, GS and MB Trussing is to be regarded as the original. New is the fact that Eurotruss have upgraded the Eurotruss Fork End Trussing System by welded slots in stead of the roll pins which will make the truss not only stronger but by replacing the spring roll also safer and less to worry about. Always check for its original mark and make sure that you only with an AUTHENTIC Eurotruss Product.

MAXI TRUSS

HEAVY TRUSS

TOWER TRUSS

MAXI BEAM: Up to 26 meters with

NOVA BEAM: Up to 24 meters with

an impressive load bearing capacity. On 26m UDL: 1.381 kg.

a high wear resistance and superior load bearing capacity. On 18m UDL: 1.404 kg. The square fork end truss of 500mm with impressive result.

GS: GS Truss used in 2 ton tower applications which can be made into a self climbing tower with the addition of a purpose built steel base unit, head block and a variety of sleeve blocks for attaching GS and Maxi Beam truss.

The square fork end truss of 617mm which is still recognized as the standard fork end truss at rental companies worldwide.

GS: Up to 24 meters with a high load bearing capacity. The standard fork end truss for touring, corporate and installation companies. The GS truss is also the tower truss in ground support systems for GS and or Maxi Beam truss main rig.

MINI BEAM: Is an extremely compact, heavy duty trussing system which is mainly used in indoor applications. Despite its compact size of 347 x 256mm an impressive load at 20m span of 1.032kg. 98

FORK END TRUSSING BY EUROTRUSS

Its durability guarantees a high return of investment. The Fork End Truss series are made according the TuV specifications.

Height: Width: Weight: Main tube: Braces: Material: Connection:

617,4mm 617,4mm ~12,5kg/m 48,4 x 4,47mm 30 (25) x 3mm EN AW-6082 T6 GP+R3

Nova Beam

The dimensions, the aluminium tubes with massive wall thickness and the welded slots to fixate the fork (male/female) receiver make the Eurotruss Fork End Truss the best truss available.

Maxi Beam

The Fork End Truss system is capable of bearing high loads on long free spans.

500mm 500mm ~15,5 kg/m 48,4 x 4,47mm 25 x 3mm EN AW-6082 T6 GP+R3

HEAVY TRUSS The Heavy Truss system is capable of bearing high loads on long free spans. The dimensions, the aluminium tubes with massive wall thickness and the welded slots to fixate the fork (male/female) receiver make the Eurotruss Fork End Truss the best truss available

GS Truss

Mini Beam

The truss series are made according the TuV specifications and made with the fast connection system.

Height: Width: Weight: Main tube: Braces: Material: Connection:

398,4mm 398,4mm ~10,5kg/m 48,4 x 4,47mm 25 x 3mm EN AW-6082 T6 GP+R3

348mm 255,5mm ~10,5kg/m 48,4 x 4,47mm 25 x 3mm EN AW-6082 T6 GP+R3

Maxi Beam Square Truss The fork end truss system for touring and installation

Touring with heavy loads

MAXI BEAM SQUARE TRUSS Maxi Beam is a heavy square duty truss, purpose designed and built to meet the rigorous requirements of touring and situations where fast and easy erection and dismantling is essential. Dimensions Maxi Beam

Maxi Beam is a heavy square duty truss, purpose designed and built to meet the rigorous requirements of touring and situations where fast and easy erection and dismantling is essential.

569mm

Maxi Beam is manufactured from high grade aluminium alloy and is engineered to conform to the latest EN and DIN standards.

617,4mm

It is a 617,4mm square truss and comes in metric and feet lengths and uses the original fork end fitting joints for ease of construction.

569mm

Maxi Beam can be used in a ground support situation using GS 2 ton towers along with the use of a GS/ Maxi Beam sleeve block.

617,4mm

Approved according the DIN EN 1999-1-1 & 1999 -1-1/A2 within Eurocode 9 specifications.

Maxi Beam Square Truss

Measurements Maxi Beam Square Truss

100

Main tube: Braces: Material: Connection: Weight:

48,4 x 4,47mm 30 (25) x 3mm EN AW-6082 T6 GP+R3 ~12,5kg/m

Loadcases Maxi Beam Square Truss Span*

8 12 16 20 24 26

UDL

CPL

kg/m

mm**

555 300 162 99 65 53

21 60 106 167 242 285

â&#x2026;&#x201C; Point Load

Âź Point Load E Point Load

kg (2x)

kg (3x)

kg (4x)

2548* 1801 1302 992 777 690

20 48 87 138 203 240

1994* 1256* 977 744 582 518

26 57 108 170 246 290

1385 900 651 496 388 345

25 57 101 160 232 274

1109 750 543 414 324 288

26 60 107 168 243 286

* in mtr

** mm is the deflection of the truss at the given load

Maxi Beam Square Truss One level constructions - Maxi Beam corners

MAXI BEAM

MAXI BEAM 1-LEVEL CORNER

FACTS

The Nova BeaThe Maxi Beam structures on one level allows various structural shapes by using corners and tees as well as using crosses.

• 4,47mm wall thickness of 48,4mm main tube • High stability aluminium alloy

One level construction Maxi Beam

• Highest standard TuV approved • High wear resistance • Welded slots • Cross Braces

Cornercode

Sizes in cm

M90/A

2 Way 90 dgr/ A 64,3 x 64,3

M90/B

2 Way 90 dgr/ B 64,3 x 64,3

M3/A

3 Way T-joint/ A 71,8 x 64,3

M3/B

3 Way T-joint/ B 71,8 x 64,3

4-Way X-joint

M90/B

M3/B

One level construction

M90/A

M3/A

Loadcases Maxi Beam Square Truss Span*

UDL

´ 10

14 18 22 23 25 * in mtr

438 217 126 80 72 59

CPL mm**

41 2125* 32 81 1518 66 135 1132 111 203 876 169 222 824 185 263 732 221

⅓ Point Load

¼ Point Load E Point Load

kg (2x)

kg (3x)

1446* 1116* 849 566 618 549

** mm is the deflection of the truss at the given load

37 1096 39 81 759 77 138 566 129 206 438 194 226 412 213 267 366 252

kg (4x)

913 633 472 365 344 305

42 82 136 204 223 264

Maxi Beam Square Truss

kg/m

101

Nova Beam Square Truss The fork end truss system for touring and installation

Fast and easy assembly for touring

NOVA BEAM SQUARE TRUSS Nova Beam is a heavy square duty truss, purpose designed and built to meet the rigorous requirements of touring and situations where fast and easy erection and dismantling is essential. Dimensions Nova Beam

Nova Beam is a heavy square duty truss, purpose designed and built to meet the rigorous requirements of touring and situations where fast and easy erection and dismantling is essential.

Nova Beam is manufactured from high grade aluminium alloy and is engineered to conform to the latest EN and DIN standards.

500mm

451,6mm

It is a 500mm square truss and comes in metric and feet lengths and uses the original fork end fitting joints for ease of construction. 451,6mm 500mm

The Nova Beam Range comes complete with all the usual corners, swivels and hinges and in combination with the GS Truss Tower Nova Beam Truss is ideal for ground supported installations. Approved according the DIN EN 1999-1-1 & 1999 -1-1/A2 within Eurocode 9 specifications.

Nova Beam Square Truss

Measurements Nova Beam Square Truss

102

Main tube:

48,4 x 4,47mm

Braces: Material: Connection: Weight:

25x 3mm EN AW-6082 T6 GP+R3 GP+R3 ~15,5kg/m

Loadcases Nova Beam Square Truss Span*

10 14 16 18 22 24

UDL

CPL

kg/m

mm**

279 134 99 78 64 49

40 79 103 130 161 256

â&#x2026;&#x201C; Point Load

Âź Point Load E Point Load

kg (2x)

kg (3x)

kg (4x)

1485 32 1002 63 844 83 728 106 584 133 495 212

1010 737 633 546 377 371

37 78 104 132 163 258

765 501 422 364 292 248

39 74 97 123 153 243

638 418 352 303 243 206

41 78 102 130 161 255

* in mtr

** mm is the deflection of the truss at the given load

Nova Beam Square Truss One level constructions - Nova Beam corners

NOVA BEAM

NOVA BEAM 1-LEVEL CORNER

FACTS

The Nova Beam has an unique fork end fitting arrangement, making the system more flexble and interchangable reducing the requirement for large quantities of corner blocks in your inventory.

• 4,47mm wall thickness of 48,4mm main tube • High stability aluminium alloy • Highest standard: TuV-approved

One level construction Nova Beam

• High wear resistance • Welded slots

Cornercode

Sizes in cm

• Cross Braces

NV90

2 Way 90 dgr 52,6 x 52,6

NV2W

2-Way Straight Through Corner 1,97 x 1,48

NV3W

3 Way T-joint 60,0 x 52,6

NV4W

4 Way X-joint 60,0 x 60,0

NV90

NV3W

One level construction

NV4W

Loadcases Nova Beam Square Truss Span*

* in mtr

CPL mm**

279 134 99 78 64 49

40 79 103 130 161 256

⅓ Point Load

¼ Point Load E Point Load

kg (2x)

kg (3x)

kg (4x)

1485 32 1002 63 844 83 728 106 584 133 495 212

1010 737 633 546 377 371

37 78 104 132 163 258

765 501 422 364 292 248

39 74 97 123 153 243

638 418 352 303 243 206

41 78 102 130 161 255

** mm is the deflection of the truss at the given load

Nova Beam Square Truss

10 14 16 18 22 24

UDL kg/m

103

Nova Beam Square Truss More level constructions - Nova Beam corners

NOVA BEAM 2-LEVEL CORNER The Nova Beam has an unique fork end fitting arrangement, making the system more flexible and interchangable reducing the requirement for large quantities of corner blocks in your inventory. Two level construction Nova Beam Cornercode

Sizes in cm

NV90-1 + One Face

3 Way 90 dgr 52,6 x 52,6 x 52,6

NV2W-1 3-W. Straight Through Corner + One Face 60,0 x 45,2 x 52,6 NV3W-1 + One Face

4 Way T-joint 60,0 x 52,6 x 52,6

NV4W-1 + One Face

5 Way X-joint 60,0 x 60,0 x 52,6

NV90/B-1

NV90/A-1

NV3W-1

Two level construction

NV3W-1

NV4W-1

Nova Beam Square Truss

Measurements Nova Beam Square Truss

104

Main tube: Braces: Material: Connection: Weight:

48,4 x 4,47mm 25x 3mm EN AW-6082 T6 GP+R3 GP+R3 ~15,5kg/m

Loadcases Nova Beam Square Truss Span*

10 14 16 18 22 24

UDL

CPL

kg/m

mm**

279 134 99 78 64 49

40 79 103 130 161 256

⅓ Point Load

¼ Point Load E Point Load

kg (2x)

kg (3x)

kg (4x)

1485 32 1002 63 844 83 728 106 584 133 495 212

1010 737 633 546 377 371

37 78 104 132 163 258

765 501 422 364 292 248

39 74 97 123 153 243

638 418 352 303 243 206

41 78 102 130 161 255

* in mtr

** mm is the deflection of the truss at the given load

Nova Beam Square Truss More level constructions - examples for up to three level corners

NV90/B-2

NV3W-2

NV90/A-2

NV3W-2

NOVA BEAM 3-LEVEL CORNER The Nova Beam has an unique fork end fitting arrangement, making the system more flexible and interchangable reducing the requirement for large quantities of corner blocks in your inventory.

NV4W-2

Three level construction Nova Beam Three level construction

Cornercode

Sizes in cm

NV90-2 + Two Faces

4 Way 90 dgr 52,6 x 52,6 x 60,0

NV2W-2 + Two Faces

3. Straight Through Corner 60,0 x 45,2 x 60,0

NV3W-2 + Two Faces

4 Way T-joint 60,0 x 52,6 x 60,0

NV4W-2 + Two faces

5 Way X-joint 60,0 x 60,0 x 60,0

Loadcases Nova Beam Square Truss Span*

* in mtr

CPL mm**

279 134 99 78 64 49

40 79 103 130 161 256

⅓ Point Load

¼ Point Load E Point Load

kg (2x)

kg (3x)

kg (4x)

1485 32 1002 63 844 83 728 106 584 133 495 212

1010 737 633 546 377 371

37 78 104 132 163 258

765 501 422 364 292 248

39 74 97 123 153 243

638 418 352 303 243 206

41 78 102 130 161 255

** mm is the deflection of the truss at the given load

Nova Beam Square Truss

10 14 16 18 22 24

UDL kg/m

105

GS Square Truss The ideal fork end truss system for rental

Square Trussing for heavy loads

GS SQUARE TRUSS GS is a heavy square duty truss, purpose designed and built to meet the rigorous requirements combining the lateral strength of MB Truss with enhanced vertical loading.

Dimensions GS Square Truss

350mm

The GS Range comes complete with all the usual corners, swivels and hinges and in combination with its Tower GS Truss is ideal for ground supported installations.

398,4 mm

GS is a 347mm square truss and comes in metric and feet lengths and can be adapted in tower applications and can be made with the addition of a purpose built steel base, head block and a variety of sleeve blocks.

350mm 398,4 mm

GS Truss is manufactured from high grade aluminium alloy and is engineered to conform to the latest EN and DIN standards. Approved according the DIN EN 1999-1-1 & 1999 -1-1/A2 within Eurocode 9 specifications.

1G3W/B

1G4W

GS Square Truss

Measurements GS Square Truss

106

Main tube: Braces: Material: Connection: Weight:

48,4 x 4,47mm 25x 3mm EN AW-6082 T6 GP+R3 GP+R3 ~10,5kg/m

Loadcases GS Square Truss Span*

6 8 12 16 20 24

UDL

CPL

kg/m

mm**

651 362 156 84 50 32

28 50 113 201 316 459

â&#x2026;&#x201C; Point Load

Âź Point Load E Point Load

kg (2x)

kg (3x)

kg (4x)

1952 23 1448 40 935 92 669 165 502 264 385 389

1464 1086 701 502 377 289

29 51 115 205 322 467

976 724 467 334 251 192

27 48 107 192 303 441

813 603 389 279 209 160

28 50 114 203 318 462

* in mtr

** mm is the deflection of the truss at the given load

GS Square Truss One level constructions - GS Corners

GS TRUSS

FACTS

1-LEVEL CORNER

The GS has an unique fork end fitting arrangement, making the system more flexible and interchangable reducing the requirement for large quantities of corner blocks in your inventory.

• 4,47mm wall thickness of 48,4mm main tube • High stability aluminium alloy • Highest standard TuV approved

Be aware of the fact that due to the male / female connectors, you select the correct corner and notice left and or right

• High wear resistance • Welded slots • Good storage and transport size

One level construction GS Truss

• Tower Truss GS

1G90/B 1G2W

Cornercode

Sizes in cm

1G90/A

2-Way 90dg A 37,3 x 37,3

1G90/B

2-Way 90dg B 37,3 x 37,3

1G2W

1G90/A

2 W. Straight Through Corner 44,7 x 29,9

1G3W/A

3 Way T-Joint A 44,7 x 37,3

1G3W/B

3 Way T-Joint B 44,7 x 37,3

1G4W

4 Way X-Joint 44,7 x 44,7

1G3W/A

One level construction

Loadcases GS Square Truss Span*

* in mtr

CPL mm**

476 228 131 64 45 32

38 78 132 255 349 459

⅓ Point Load

¼ Point Load E Point Load

kg (2x)

kg (3x)

kg (4x)

1665 1142 854 577 469 385

31 63 108 211 292 389

1248 856 640 433 352 289

39 80 135 260 356 467

832 571 427 289 235 192

36 74 126 244 335 441

694 476 356 241 196 160

39 79 133 257 352 462

** mm is the deflection of the truss at the given load

GS Square Truss

7 10 13 18 21 24

UDL kg/m

107

GS Square Truss More level constructions - GS Corners

GS TRUSS

2-LEVEL CORNER

The GS has an unique fork end fitting arrangement, making the system more flexible and interchangable reducing the requirement for large quantities of corner blocks in your inventory.

Two level construction 1G3W/B/M

Be aware of the fact that due to the male / female connectors, you select the correct corner and notice left and or right

1G4W/B/M

Two level construction GS Truss Cornercode

Sizes in cm

1G90/A/F + female down

2-Way 90dg A 37,3 x 37,3 x 37,3

1G90/A/M + male down

2-Way 90dg A 37,3 x 37,3 x 37,3

1G90/B/F + female down

2-Way 90dg B 37,3 x 37,3 x 37,3

1G90/B/M + male down

2-Way 90dg B 37,3 x 37,3 x 37,3

1G90HV/A/M 1G4W/A/M

1G90HV/B/M

1G2W/F 2 W. Straight Through Corner + female down 44,7 x 29,9 x 37,3 1G2W/M 2 W. Straight Through Corner + male down 44,7 x 29,9 x 37,3 1G3W/A/F + female down

3 Way T-Joint A 44,7 x 37,3 x 37,3

1G3W/A/M + male down

3 Way T-Joint A 44,7 x 37,3 x 37,3

1G3W/B/F + female down

3 Way T-Joint B 44,7 x 37,3 x 37,3

1G3W/B/M + male down

3 Way T-Joint B 44,7 x 37,3 x 37,3

1G4W/A/F + female down

4 Way X-Joint A 44,7 x 44,7 x 37,3

GS Square Truss

Measurements GS Square Truss

108

Main tube:

48,4 x 4,47mm

Braces: Material: Connection: Weight:

25x 3mm EN AW-6082 T6 GP+R3 GP+R3 ~10,5kg/m

Three level construction 1G90HV/A/M+F

Loadcases GS Square Truss Span*

6 8 10 12 14 15

UDL

CPL

kg/m

mm**

651 362 228 156 112 96

28 50 78 113 154 177

1952 23 1448 40 1142 63 935 92 784 126 723 145

⅓ Point Load

¼ Point Load E Point Load

kg (2x)

kg (3x)

kg (4x)

976 724 571 467 392 362

27 48 74 107 147 169

813 603 476 389 327 301

28 50 79 114 155 178

1464 29 1086 51 856 80 701 115 588 157 542 180 * in mtr

** mm is the deflection of the truss at the given load

GS Square Truss More level constructions - GS Corners

GS TRUSS

3-LEVEL CORNER Three level construction GS Truss

1G90/B/M

1G2/W/M

1G90/A/M

Cornercode

Sizes in cm

1G90/A/M-F

2-Way 90dg A

+ fe + ma down

37,3 x 37,3

1G90/B/M-F

2-Way 90dg B

+ fe + ma down

37,3 x 37,3 x 44,7

1G2W/M-F

2 Way Straight Through Corner

+ fe + ma down

44,7 x 29,9 x 44,7

1G3W/A/M-F

3 Way T-Joint A

+ fe + ma down

44,7 x 37,3 x 44,7

1G3W/B/M-F

3 Way T-Joint B

+ fe + ma down

44,7 x 37,3 x 44,7

1G4W/A/M-F

4 Way X-Joint A

+ fe + ma down

44,7 x 44,7 x 44,7

1G4W/B/M-F

4 Way X-Joint B

+ fe + ma down

44,7 x 44,7 x 44,7

1G90/HV/A/M-F

2-Way Goal Post A

+ fe + ma down

37,3 x 29,9 x 44,7

2-Way Goal Post B

+ fe + ma down

37,3 x 29,9 x 44,7

1G3W/A/M

1G90/HV/B/M-F

1G90/B/M+F 1G2/W/M+F 1G3W/B/M+F 1G90/A/M+F

1G4W/B/M+F

1G3W/A/M+F

1G4W/A/M

1G90HV/B/M+F

Loadcases GS Square Truss Span*

UDL

16 18 19 21 22 24 * in mtr

84 64 57 45 40 32

CPL mm**

201 255 285 349 384 459

⅓ Point Load

¼ Point Load E Point Load

kg (2x)

kg (3x)

kg (4x)

669 577 538 469 439 385

165 211 237 292 323 389

502 433 403 352 329 289

205 260 290 356 391 467

334 289 269 235 220 192

192 244 273 335 368 441

279 241 224 196 183 160

203 257 287 352 386 462

** mm is the deflection of the truss at the given load

GS Square Truss

kg/m

109

Mini Beam Rectangular Truss Extremely compact truss for impressive loading on long spans

The solution for long spans

MINI BEAM RECTANGULAR TRUSS Mini Beam is an extremely compact heavy duty truss system, purpose designed and built to meet the rigorous requirements.

Dimensions Mini Beam Rectangular Truss

299 mm

Mini Beam has an impressive strength to weight ratio, being able to typically take 1768kg load on 10m span and with its small size the ideal truss to manage.

347,4 mm

Mini Beam is a 347,4mm x 254,9mm rectangular truss and comes in metric and feet lengths and consist of a large variety of corner blocks, horizontal vertical as swivel corners, making it an extremely versatile product.

206,5mm

Mini Beam Truss is manufactured from high grade aluminium alloy and is engineered to conform to the latest EN and DIN standards.

254,9

Approved according the DIN EN 1999-1-1 & 1999 -1-1/A2 within Eurocode 9 specifications.

MINI BEAM

FACTS

• 4,47mm wall thickness of 48,4mm main tube • High stability aluminium alloy • Highest standard TuV approved • High wear resistance • Welded slots • Good storage and transport size

Mini Beam Rectangular Truss

Measurements Mini Beam Rectangular Truss

110

Main tube: Braces: Material: Connection: Weight:

48,4 x 4,47mm 25x 3mm0,98 x 0,12in EN AW-6082 T6 GP+R3 ~10,5kg/m

Loadcases Mini Beam Rectangular Truss Span*

4 6 9 12 16 20

UDL

CPL

kg/m

mm**

1272 952 285 157 85 52

11 28 63 113 201 315

⅓ Point Load

¼ Point Load E Point Load

kg (2x)

kg (3x)

2865* 1956 1285 943 680 516

10 23 51 91 164 261

2104* 1423* 963 707 510 387

12 28 65 115 205 321

1477 12 978 27 642 60 471 107 340 192 258 302

* in mtr

kg (4x)

1231 13 815 28 535 64 393 113 283 202 215 318

** mm is the deflection of the truss at the given load

Mini Beam Rectangular Truss One level constructions - Mini Beam corners

MINI BEAM 2-LEVEL CORNER The Mini Beam structures allows various structural shapes by using 90 degree corners, tees and crosses. Be aware of the fact that due to the male / female connectors, you select the correct corner and notice left and or right

One level construction Mini Beam Cornercode

Sizes in cm

MB90/A MB90/B

28,1 x 28,1 28,1 x 28,1

2-Way 90dg A 2-Way 90dg B

MB3W/A 3 Way T-Joint A MB3W/B 3 Way T-Joint B

35,5 x 28,1 35,5 x 28,1

MB4W

35,5 x 35,5

4 Way X-Joint

One level construction

MB90/B

MB90/A MB3W/B

MB3W/A

MB4W

Loadcases Mini Beam Rectangular Truss

8 12 14 16 18 20 * in mtr

UDL

CPL

kg/m

mm**

363 157 113 85 66 52

50 113 153 201 255 315

⅓ Point Load

¼ Point Load E Point Load

kg (2x)

kg (3x)

kg (4x)

1453 943 794 680 590 516

40 91 125 164 210 261

1090 707 595 510 442 387

51 115 157 205 260 321

727 471 397 340 295 258

47 107 146 192 244 302

606 393 331 283 246 215

50 113 155 202 257 318

** mm is the deflection of the truss at the given load

Mini Beam Rectangular Truss

Span*

111

Mini Beam Rectangular Truss More level constructions - Mini Beam Corners

MINI BEAM 2-LEVEL CORNER

Two level construction

The Mini Beam structures allows various structural shapes by using 90 degree corners, tees and crosses.

MB90/B/F

MB3W/B/F

Be aware of the fact that due to the male / female connectors, you select the correct corner and notice left and or right

MB4W/B/F

Two level construction Mini Beam Cornercode

Sizes in cm

MB90/A/F + female down

2-Way 90dg A 35,5 x 35,5 x 37,3

MB90/A/M + male down

2-Way 90dg A 35,5 x 35,5 x 37,3

MB90/B/F + female down

2-Way 90dg B 35,5 x 35,5 x 37,3

MB90/B/M + male down

2-Way 90dg B 35,5 x 35,5 x 37,3

MB3W/A/F + female down

3 Way T-Joint A 44,8 x 28,1 x 37,3

MB3W/A/M + male down

3 Way T-Joint A 44,8 x 28,1 x 37,3

MB3W/B/F + female down

3 Way T-Joint B 44,8 x 28,1 x 37,3

MB3W/B/M + male down

3 Way T-Joint B 44,8 x 28,1 x 37,3

MB4W/A/F + female down

4 Way X-Joint A 44,8 x 35,5 x 37,3

MB4W/A/M + male down

4 Way X-Joint A 44,8 x 35,5 x 37,3

MB4W/B/F + female down

4 Way X-Joint B 44,8 x 35,5 x 37,3

MB4W/B/M + male down

4 Way X-Joint B 44,8 x 35,5 x 37,3

Mini Beam Rectangular Truss

Measurements Mini Beam Rectangular Truss

112

Main tube: Braces: Material: Connection: Weight:

48,4 x 4,47mm 25x 3mm0,98 x 0,12in EN AW-6082 T6 GP+R3 ~10,5kg/m

MB3W/A/F MB90HV/A/F

MB4W/A/F

MB90HV/B/F MB3W/B/M

MB4W/B/M

MB90HV/A/M

MB4W/A/M

Two level construction

MB90HV/B/M

Loadcases Mini Beam Rectangular Truss Span*

4 6 8 10 11 12

UDL

CPL

kg/m

mm**

1272 952 363 230 189 157

11 28 50 78 95 113

⅓ Point Load

¼ Point Load E Point Load

kg (2x)

kg (3x)

2865* 1956 1453 1149 1037 943

10 23 40 63 76 91

2104* 1423* 1090 862 778 707

12 28 51 80 97 115

1477 12 978 27 727 47 574 74 518 90 471 107

* in mtr

kg (4x)

1231 13 815 28 606 50 488 79 432 95 393 113

** mm is the deflection of the truss at the given load

Mini Beam Rectangular Truss More level constructions - Mini Beam Corners

MINI BEAM 2-LEVEL CORNER

MINI BEAM 3-LEVEL CORNER

Two level construction Mini Beam

Three level construction Mini Beam

MB90/A/F

Cornercode

Sizes in cm

Cornercode

Sizes in cm

MB90/HV/A/F + female down

2-Way Goal Post A 35,5 x 20,7 x 37,3

MB90/A/M-F + fe + ma down

2-Way 90dg A 35,5 x 35,5 x 44,8

MB90/HV/A/M + male down

2-Way Goal Post A 35,5 x 20,7 x 37,3

MB90/B/M-F + fe + ma down

2-Way 90dg B 35,5 x 35,5 x 44,8

MB90/HV/B/F + female down

2-Way Goal Post B 35,5 x 20,7 x 37,3

MB3W/A/M-F + fe + ma down

3 Way T-Joint A 44,8 x 28,1 x 44,8

MB90/HV/B/M + male down

2-Way Goal Post B 35,5 x 20,7 x 37,3

MB3W/B/M-F + fe + ma down

3 Way T-Joint B 44,8 x 28,1 x 44,8

MB4W/A/M-F + fe + ma down

4 Way X-Joint A 44,8 x 35,5 x 44,8

MB4W/B/M-F + fe + ma down

4 Way X-Joint B 44,8 x 35,5 x 44,8

MB90/HV/A/M-F + fe + ma down

2-Way Goal Post A 35,5 x 20,7 x 44,8

MB90/HV/B/M-F + fe + ma down

2-Way Goal Post B 35,5 x 20,7 x 44,8

MB90/B/M

Three level construction

MB90/A/M

MB3W/A/M MB3W/B/M/F MB90/B/M/F

MB4W/B/M/F MB90/A/M/F

MB4W/A/M/F MB3W/A/M/F MB90HV/A/M/F MB90HV/B/M/F

Loadcases Mini Beam Rectangular Truss

13 14 16 18 19 20 * in mtr

UDL

CPL

kg/m

mm**

133 113 85 66 58 52

132 153 201 255 284 315

⅓ Point Load

¼ Point Load E Point Load

kg (2x)

kg (3x)

kg (4x)

863 794 680 590 551 516

107 125 164 210 235 261

647 595 510 442 413 387

135 157 205 260 290 321

431 397 340 295 276 258

126 146 192 244 272 302

360 331 283 246 230 215

133 155 202 257 286 318

** mm is the deflection of the truss at the given load

Mini Beam Rectangular Truss

Span*

113

GS Tower The main Tower for the Fork End Trussing

Top Section

The multiple solution

GS TOWER

1GH 1T Head Section for Motors

The GS Tower is the foundation of the Fork End Ground Support tower systems. It is specifically designed as a tower truss and can be used in stand alone, goal post situation and in multiple grid situations. In outdoor use, on the other hand, the tower is exposed to very high flexural strain due to the coverings or roof.

Sleeveblock

1GTB/GS 4-Way Combi Sleeveblock for MBX and GS

GS TOWER Max. Height: Max Loading: Max Loading: Tower Truss: Sleeve Block: Self Weight:

1GB/STAB Stabilizer for Long Outrigger 1GB/LO

FACTS 10m 1.000 kg 1.440 kg GS Truss 1GTB/MB (GS - GSNV) 105 kg

Base 1GB/SO Steel Short Outrigger for 1GB

GS Tower

1GB Steel Base on wheels incl. fork connectors for GS

114

1GB/LO Steel Long Outrigger for 1GB

BASES:

HEAD SECTION:

The Steel Base on wheels is available with short and or long outriggers in combination with stabilizers. The base is equipped with fork male/female receivers to build the GS Mast Sections.

The head section is standard equipped with wheels for 1 Ton Motors (2 Ton is available). It is designed to take most types of chains used in lifting equipment.

SLEEVE BLOCKS:

MAST SECTIONS:

The travelling sleeve blocks that are used with the system is adaptable to connect to MB, GS and MBX Truss and combi sleeve blocks are available (Shown: Combi with MBX and GS).

The tower truss is the standard GS Truss, a square 347mm heavy duty truss made according DIN EN 1999-1-1 & 1999 -1-1/A2 within Eurocode 9 specifications and approved by the TuV.

Accessories Base Plates, Trusspins and R-Clips

390mm / 15,35in

Base Plates

340mm / 13,39in

48mm / 1,89in

390mm / 15,35in

PLB-MB-M MB Base Plate

390mm / 15,35in

PLB-MB-F MB Base Plate

48mm / 1,89in

390mm / 15,35in

PLB-GS-F GS Base Plate

48mm / 1,89in

390mm / 15,35in

48mm / 1,89in

PLB-GS-M GS Base Plate

Pins & Clips

71mm / 2,8in

GP+R3 Trusspin + R-Clip

Accessories for Fork End range

61mm / 2,4in

TP+R3 Trusspin + R-Clip RP

115

Roof Systems ARC roof systems SADDLE roof systems PITCH roof systems

Introduction Roof Systems

INTRODUCTION OF ROOF SYSTEMS Eurotruss designed its total roof range in order to meet the market standards in terms of size, load bearing capacity, truss system, modularity and flexibility. The Eurotruss Roof System is a temporarily mobile structure to cover a stage and provide the possibility of hanging numbers of light features, PA, Led Screens and other features required to make a spectacular show under any given circumstance. Eurotruss categorize its roof systems to the Eurotruss Truss Types and required stage sizes. Eurotruss considers during design the safety, the environmental circumstances and the required load bearing capacity. Each Eurotruss roof is calculated and made according to the new European Norm (standards and regulations) EN-13814 and also covers the standards of the DIN 4112 Temporarily Structures. From mid 2014 each temporarily structure is obliged to comply to the new EN-13814 norm and is the DIN 4112 no longer valid. Each roof must have a manual and a structural report in order to comply to the regulations and to be safe. The broad and long experience has resulted in a perfectly matched range of Roof Systems.

A Eurotruss Roof is designed under the following restrictions: The roof design should contain a reasonable number of standard truss types. Building on from an existing Eurotruss Ground Support System. Relative high loading figures for each size and type of roof. Each Eurotruss roof should apply to all safety regulations worldwide.

118

Standard Eurotruss carriers three different shaped roof systems in all various sizes and load bearing capacities.

ARC ROOF – SADDLE ROOF – PITCH ROOF Find your favorite roof in the matrix below

Code

Roof

Tower

Qte towers

Main rig

Roof structure

Dimensions in mtrs Width Clearance betcentre/ side ween towers

Depth

User load UDL in kgs

User load PL in kgs

PA wing/frame 2x in kgs

ARC ROOFS AR-10

AR-20

AR-30

10x8

HD34

HD33

5,8 / 4,5

10,2

8,9

800

3000

1000

8x6

FD/HD34

FD/HD33

5,0 / 4,0

8,2

6,9

560

3000

1000

8x4

FD/HD34

FD/HD33

5,0 / 4,0

8,2

4,9

400

3000

1000

6x4

FD/HD34

FD/HD33

4,3 / 3,5

6,2

4,9

300

3000

1000

16x12

TD35

11,0 / 8,8

16,8

13800

15000

2000

12x12

TD35

10,1 / 8,8

12,9

13800

15000

2000

24x15

TD44

12,5 / 8,4

24,1

15,6

47400

34500

4000

20x15

TD44

11,5 / 8,4

20,1

15,6

39000

22500

4000

16x12

TD44

10,1/ 8,4

16,1

11,9

26400

18000

4000

10x8

HD34

HD34/32

10,2

7,8

1720

2000

1000

8x6

FD/HD34

FD/HD34/32

8,2

5,8

1200

1400

1000

8x4

FD/HD34

FD/HD34/32

8,2

3,8

900

1000

6x4

FD/HD34

FD/HD34/32

6,2

3,8

640

1000

14x10

HD34

HD44

HD34/44

14,3

10,0

1440

1600

1000

12x10

HD34

HD44

HD34/44

12,3

10,0

2640

2600

1000

14x10

TD35

10,6

15,0

10,2

5200

4600

2000

12x10

TD35

10,6

13,0

10,2

5200

4600

2000

20x14

TD35/HD34

6+1

10,6

21,0

13,9

10500

7100

2000

18x14

TD35/HD34

6+1

10,6

19,0

13,9

10500

7100

2000

16x12

TD35

10,6

17,0

11,9

8300

6600

2000

14x12

TD35

10,6

15,0

11,9

8300

6600

2000

24x16

TD44

24,1

15,6

22100

11000

2000

20x16

TD44

20,1

15,6

23600

11000

2000

16x12

TD44

16,1

11,9

14900

8250

2000

24x15

TD44

Keder profile

24,3

21,2

17500

20000

2000

20x15

TD44

Keder profile

20,3

14,4

24400

20000

2000

16x12

TD44

Keder profile

16,3

14,4

19300

21600

2000

24x21

TD50

Keder profile

24,3

21,2

36400

33600

3000

20x15

TD50

Keder profile

20,3

14,4

39000

27800

3000

16x15

TD50

Keder profile

16,3

14,4

33700

27800

3000

SADDLE ROOFS SR-10

SR-20

SR-30

SR-40

SR-50

PITCH ROOFS PR-10

PR-20

119

ARC Roofs AR-30 Mega ARC TT Roof AR-20 Super ARC ST Roof AR-10 Basic ARC HD/FD Roof

AR-30 Mega ARC TT Roof TT roofs of 24x15, 20x15 and 16x12m on six or eight towers

AR-30 MEGA ARC TT ROOF The AR30 Roof is a Tower based Structure constructed of 5 Arches on eight (six) TD44 Towers. The Arches are made of standard straight truss sections with hinges and have a keder profile on top to fit the canopy. The AR30 Roof is a tower based structure with 5 arches. The arched roof structure consist of standard TT truss sections with hinges and spreader plates and supported with spreader truss which gives stability and massive strength and huge multi point loads. The Arches are attached by a hinged connection at the outer ends to standard a TD44 Tower or optional a TD50 Tower. The arched truss have a keder profile on top to fit the canopy. The AR30 is designed and set up in such a way which makes it possible to build the roof in various configurations as size of the keder profiles match the TT truss sections. The AR30 Mega Roofs are designed to be set up on ballast base with compression beams or with integrated bases in any kind of steel scaffolding stage.

area e Stage Effectiv 2 o 192m2 0m t from 36

The AR30 Mega Roof is standard available and pre-calculated with the dimensions 24x15m, 20x15m both on eight Towers and 16x12m on six Towers. The AR30 has the highest load bearing capacity of all the roofs in the Eurotruss Roof Program. This roof meets all the required international standards set by light & stage designers of concerts and events. Naturally PA Wings and Side Houses are available.

AR-30 AR-20

AR-30 MEGA ARC TT Roof:

24x15

20x15

16x12m

Technical Specifications:

SR-50

User Load Roof UDL:*

47.400

39.000

26.400

Towers:

SR-40

User Load Roof CPL:*

34.500

22.500

18.000

Main Grid:

frame 2x in kg:

4.000

Size:

Max. Wind Force:**

10 Bft

Options:

AR-10

SR-30 SR-20 SR-10 PR-20

User Load PA wing

Roof Structure:

TD44 Tower GS TT 101x58cm TT 101x58cm 24x15, 20x15 and 16x12m PA Wings, Side Houses

PR-10

122

*in kg I **Walls (side/back) must be removed if Wind Speed exceeds 72 km/hrs (9bft).

E: 16 ,6 m

D: 14,25 m

C: 11,4 m

C: 15,5 m A: 24,1 m

B: 15,6 m

B: 25,0 m

AR-30

AR-30 dimensions:

AR-20

24x15

20x15

16x12

A. Inside Roof

24,1 x 15,6

20,1 x 15,6

16,1 x 11,9

SR-50

B. Outside Roof

25,0 x 15,6

21,4 x 15,6

17,4 x 11,9

SR-40

C. Clearance (side)

15,5 (11,4)

14,5 (11,4)

13,1 (11,4)

D. Tower Height

14,25

E. Rooftop Height

16,6

15,3

14,2

AR-10

SR-30 SR-20 SR-10 PR-20 PR-10

*in mtrs

123

AR-20 Super ARC ST Roof ST roofs of 16x12 and 12x12m on six towers

AR-20 SUPER ARC ST ROOF The AR20 Roof is a Tower based Structure constructed of three Arches and a Cantilever Arch on six TD35 Towers. The Arches are made of standard straight truss sections with hinges and have a keder profile on top to fit the canopy. The AR20 Super ST Roof is a tower based structure with three arches and a standard additional arch as Cantilever. The arched roof structure consist of standard ST truss sections with hinges and spreader plates and supported with spreader truss which gives stability and massive strength and huge multi point loads. The Arches are attached by a hinged connection at the outer ends to standard a TD35 Tower. The arched truss have a keder profile on top to fit the canopy.

a Stage are Effective 2 144m2 to m from 192

The AR20 is designed and set up in such a way which makes it possible to build the roof in various configurations as size of the keder profiles match the TT truss sections. The AR20 Super Roofs are designed to be set up on standard single steel bases or with integrated bases in any kind of steel scaffolding stage. The AR20 Super Roof is standard available and pre-calculated with the dimensions 16x12m and 12x12m both on six Towers. The AR20 has an incredible uniform divided and point load bearing capacity. This roof meets all the required international standards set by light & stage designers of concerts and events. Naturally PA Wings and Side Houses are available. AR-30 AR-20

AR-20 SUPER ARC ST Roof:

16x12

12x12m

Technical Specifications:

SR-50

User Load Roof UDL:*

13.800

Towers:

SR-40

User Load Roof CPL:*

15.000

Main Grid:

frame 2x in kg:

2.000

Size:

Max. Wind Force:

10 Bft

Options:

AR-10

SR-30 SR-20 SR-10 PR-20

User Load PA wing

Roof Structure:

TD35 Tower GS ST 51x51cm ST 51x51cm 16x12 and 12x12m PA Wings, Side Houses

PR-10

124

*in kg I **Walls (side/back) must be removed if Wind Speed exceeds 72 km/hrs (9bft).

D: 11,7 m

11,0 m

C: 8,8 m

C: 11,0 m A: 16,8 m

B: 12,0 m

B: 17,7 m

AR-30

AR-20 dimensions:

AR-20

16x12

12x12

A. Inside Roof

16,8 x 12,0

12,9 x 12,0

SR-50

B. Outside Roof

17,7 x 12,0

13,9 x 12,0

SR-40

11,0 (8,8)

10,1 (8,8)

D. Tower Height

11,0

E. Rooftop Height

11,7

10,7

C. Clearance (side)

AR-10

SR-30 SR-20 SR-10 PR-20 PR-10

*in mtrs

125

AR-10 Basic ARC HD/FD Roof HD/FD34 roofs of 10x8, 8x6, 8x4 and 6x4m on four towers

AR-10 BASIC ARC HD/FD ROOF The AR10 Roof is a fixed Leg Structure constructed of four triangular truss Arches. The AR10 Arc Roof is a fix leg based structure with four (three) arches with in between clamped support tubes . The arched roof structure consist of standard HD/FD34 mast truss sections on special small bases with integrated jacks and a few special corners to fit the triangular HD33 arches. Between the arches standard hook on bars are required for extra stability and to support the canopy. The AR10 Arc Roof comes in various dimensions 10x8m, 8x6m, 8x4m and 6x4m and all roofs are available in FD or HD Version. The top canopy is tightened with tubes and ratchet straps and the wall canopies can be either in full PVC or the wind through mash.

area e Stage Effectiv 2 o 24m2 m t from 80

The AR10 Arc Roof is on many occasions the perfect solution by its low self weight, minimum of volume, easy and fast manual set up by 2 persons and a nice appearance. This roof comes with a structural report and manual all according the most recent regulations. Naturally PA Wings are available by extending the roof.

AR-30 AR-20 AR-10

AR-10 BASIC ARC HD/FD Roof:

10x8

8x6

8x4

6x4m

Technical Specifications:

SR-50

User Load Roof UDL:*

800

560

400

300

SR-40

User Load Roof CPL:*

3.000

frame 2x in kg:

1.000

Size:

Max. Wind Force:**

10 Bft

Options:

SR-30 SR-20 SR-10 PR-20

User Load PA wing

Towers:

HD/FD34 Truss legs

Main Grid:

HD/FD34 29x29cm

Roof Structure:

HD33 29cm triangular 10x8, 8x6, 8x4 and 6x4m PA Wings

PR-10

126

*in kg I **Walls (side/back) must be removed if Wind Speed exceeds 72 km/hrs (9bft).

E: 6,0 m

D: 4,8 m

C: 4,5 m

C: 5,8 m A: 10,2 m

B: 8,9 m

B: 10,8 m

AR-30

AR-10 dimensions:

AR-20

10x8

8x6

8x4

6x4

A. Inside Roof

10,2 x 8,9

8,2 x 6,9

8,2 x 4,9

6,2 x 4,9

SR-50

B. Outside Roof

10,8 x 8,9

8,8 x 6,9

8,8 x 4,9

6,8 x 4,9

SR-40

C. Clearance (side)

5,8 (4,5)

5,0 (4,0)

4,3 (3,5)

D. Tower Height

4,5

4,0

3,5

E. Rooftop Height

6,0

5,3

4,6

AR-10

SR-30 SR-20 SR-10 PR-20 PR-10

*in mtrs

127

SADDLE Roofs SR50

TT Pro Roof

SR40

ST Pro Roof

SR30

ST Medium Roof

SR20

HD44 Medium Roof

SR10

HD34 Basic Roof

SR50 TT Pro Roof TT roofs of 24x16, 20x16 and 16x12m on eight towers

SR50 TT PRO ROOF The SR50 Roof consist of a TT Ground Support on eight TD44 Towers and a Roof Structure of ST Truss. The SR50 Roof is a tower based structure with a saddle roof. This saddle roof has a standard impressive load bearing TT Main Rig and an ST roof structure with a fixed angle on the four ST gables which enables you to re-build the roof in various dimensions. The standard SR50 TT Roofs are available in 24x16m, 20x16m and 16x12m all on eight TD44 Towers. The SR50 TT Pro Roof is designed and calculated to be set up on ballast bases with compression beams between the side and rear towers or can be set up with integrated bases (ballast safes) in any kind of steel scaffolding stage. The top canopy is tightened with tubes and ratchet straps and the wall canopies can be either in full PVC or the wind through mash.

area e Stage Effectiv 2 o 192m2 4m t from 38

This roof meets all the required international standards and has been pre-calculated and comes with a full structural report and manual according the most recent regulations. Naturally PA Wings and Side Houses are available. AR-30 AR-20

SR-50 TT Pro Roof:

24x16

20x16

16x12m

Technical Specifications:

SR-50

User Load Roof UDL:*

22.100

23.600

14.900

Towers:

SR-40

User Load Roof CPL:*

11.000

8.250

Main Grid:

frame 2x in kg:

2.000

Size:

Max. Wind Force:

10 Bft

Options:

AR-10

SR-30 SR-20 SR-10 PR-20

User Load PA wing

Roof Structure:

TD44 Tower GS TT 101x 58cm ST 51x 51cm 24x16, 20x16 and 16x12m PA Wings, Side Houses

PR-10

130

*in kg I **Walls (side/back) must be removed if Wind Speed exceeds 72 km/hrs (9bft).

E: 15,0 m

D: 13,7 m

C: 11,0 m

A: 24,1 m

B: 16,4 m

B: 25,1 m

AR-30

SR-50 dimensions:

AR-20

24x16

20x16

16x12

A Inside Roof

24,1 x 15,6

20,1 x 15,6

16,1 x 11,9

SR-50

B Outside Roof

25,1 x 16,4

21,1 x 16,4

17,1 x 12,1

SR-40

C Clearance (side)

11,0

D Tower Height

13,7

15,0

14,5

14,0

Rooftop Height

AR-10

SR-30 SR-20 SR-10 PR-20 PR-10

*in mtrs

131

SR40 ST Pro Roof ST roofs of 20x14, 18x14, 16x12 and 14x12m on six or six+one towers

SR40 ST PRO ROOF The SR40 Roof consist of a ST Ground Support on six TD35 Towers and a Roof Structure 0f ST Truss. The PR40 Roof is a tower based structure with a saddle roof. These saddle roofs have a standard impressive load bearing ST Main Rig and the gable and have a fixed angle which enables you to re-build the roof in various dimensions. The standard SR40 ST Roofs are available in 20x14m, 18x14m, 16x12m and 14x12m all on six TD35 Towers. The 20x14m and 18x14m roofs have an additional center back tower to enhance the load bearing capacity and maintain the required clearance.

ge area Effective Stage Staarea Effectiv2 e 2 162 8m2 to from 130m tom150m from 280 / 1399 to 1614sqft

The Saddle Roofs are designed to be set up on single steel bases which can be connected with a compression beam which reduces the ballast requirements or can be set up with integrated bases (ballast safes) in any kind of steel scaffolding stage. The top canopy is tightened with tubes and ratchet straps and the wall canopies can be either in full PVC or the wind through mash. This roof meets all the required international standards and has been pre-calculated and comes with a full structural report and manual according the most recent regulations. Naturally PA Wings and Side Houses are available. AR-30 AR-20

SR-40 ST Pro Roof:

20x14

18x14

SR-50

User Load Roof UDL:*

10.500

8.300

Towers:

SR-40

User Load Roof CPL:*

7.100

6.600

Main Grid:

frame 2x in kg:

2.000

Size:

Max. Wind Force:**

10 Bft

Options:

AR-10

SR-30 SR-20 SR-10 PR-20

16x12

14x12m

User Load PA wing

Technical Specifications: TD35 Tower GS ST 51x 51cm

Roof Structure:

ST 51x 51cm

20x14, 18x14, 16x12 and 14x12m PA Wings, Side Houses

PR-10

132

*in kg I **Walls (side/back) must be removed if Wind Speed exceeds 72 km/hrs (9bft).

E: 13,6 m

D: 12,5 m

C: 10,6 m

A: 21,0 m

B: 13,9 m

B: 21,9 m

AR-30 AR-20

SR-40 dimensions:

20x 14m

18x 14m

16x 12m

14x 12m

A Inside Roof

21,0x13,9

19,0x13,9

17,0x11,9

15,0x11,9

SR-50

B Outside Roof

21,9x13,9

19,9x13,9

17,9x11,9

15,9x11,9

SR-40

C Clearance (side)

10,6

D Tower Height

12,5

13,6

13,4

13,1

12,8

Rooftop Height

AR-10

SR-30 SR-20 SR-10 PR-20 PR-10

*in mtrs

133

SR30 ST Medium Roof ST roofs of 14x10 and 12x10m on four towers

SR30 ST MEDIUM ROOF The SR30 Roof consist of a ST Ground Support on four TD35 Towers and a Roof Structure of ST Truss. The PR30 Roof is a tower based structure with a saddle roof. These saddle roofs have a standard impressive load bearing ST Main Rig and the gable and have a fixed angle which enables you to re-build the roof in various dimensions and can be extended into a SR40 ST Pro Roof. The standard SR30 ST Roofs are available in 14x10m and 12x10m all on four TD35 Towers. The Saddle Roofs are designed to be set up on single steel bases which can be connected with a compression beam which reduces the ballast requirements or can be set up with integrated bases (ballast safes) in any kind of steel scaffolding stage. The top canopy is tightened with tubes and ratchet straps and the wall canopies can be either in full PVC or the wind through mash.

a Stage are Effective 2 120m2 0m to from 14

SR-30 ST Medium Roof:

14x10

12x10

Technical Specifications:

SR-50

User Load Roof UDL:*

5.200

Towers:

SR-40

User Load Roof CPL:*

4.600

Main Grid:

frame 2x in kg:

2.000

Size:

Max. Wind Force:**

10 Bft

Options:

AR-10

SR-30 SR-20 SR-10 PR-20

User Load PA wing

Roof Structure:

TD35 Tower GS ST 51x 51cm ST 51x 51cm 14x10 and 12x10m PA Wings, Side Houses

PR-10

134

*in kg I **Walls (side/back) must be removed if Wind Speed exceeds 72 km/hrs (9bft).

E: 12,8 m

D: 12,5 m

C: 10,6 m

A: 15,0 m

B: 10,2 m

B: 15,9 m

AR-30

SR-30 dimensions:

AR-20

14x10

12x10

A. Inside Roof

15,0 x 10,2

13,0 x 10,2

SR-50

B. Outside Roof

15,9 x 10,2

13,9 x 10,2

SR-40

C. Clearance (side)

10,6

D. Tower Height

12,5

E. Rooftop Height

12,8

12,6

AR-10

SR-30 SR-20 SR-10 PR-20 PR-10

*in mtrs

135

SR20 HD44 Medium Roof HD44 roofs of 14x10 and 12x10m on four towers

SR20 HD44 MEDIUM ROOF The SR20 Roof consist of a HD44 Ground Support on four HD34 Towers and a Roof Structure of HD34 Truss and Roof Support Beams of HD33. The PR20 Roof is a tower based structure with a saddle roof. This saddle roof has a relative high load bearing HD44 Main Rig with an important middle span from front to back and an HD34 roof structure with a fixed angle on the two HD34 gables which enables you to re-build the roof in various dimensions of which the 14x10m and the 12x10m are the standard pre-calculated dimensions. The HD version guarantees a higher workable load, a higher clearance and the combination of 290mm and 400mm truss ensures you of a minimum of trucking and storage space. This SR20 Roof can be lifted motorized or by manual chain hoists.

area e Stage Effectiv 2 o 120m2 0m t from 14

The SR20 Roof is designed and calculated to be set up on single steel bases or can be set up with integrated bases (ballast safes) in any kind of steel scaffolding stage. The top canopy is tightened with tubes and ratchet straps and the wall canopies can be either in full PVC or the wind through mash. This roof meets all the required international standards and has been pre-calculated and comes with a full structural report and manual according the most recent regulations. Naturally PA Wings are available. AR-30 AR-20

SR-20 HD44 Medium Roof:

14x10

12x10

Technical Specifications:

SR-50

User Load Roof UDL:*

1.440

2.640

Towers:

HD34 Tower GS

SR-40

User Load Roof CPL:*

1.600

2.600

Main Grid:

HD44 40x40cm

Roof Structure:

HD44/34: 29x29cm

1.000

Size:

14x10 and 12x10m

10 Bft

Options:

AR-10

SR-30 SR-20 SR-10 PR-20

User Load PA wing frame 2x in kg: Max. Wind Force:

PA Wings and Canopy

PR-10

136

*in kg I **Walls (side/back) must be removed if Wind Speed exceeds 72 km/hrs (9bft).

E: 9,2 m

D: 8,4 m

C: 7,0 m

A: 14,3 m

B: 10,0 m

B: 15,0 m

AR-30

SR-20 dimensions:

AR-20

14x 10m

12x 10m

A Inside Roof

14,3 x 10,0

12,3 x 10,0

SR-50

B Outside Roof

15,0 x 10,0

13,0 x 10,0

SR-40

C Clearance (side)

7,0

D Tower Height

8,4

9,2

8,9

Rooftop Height

AR-10

SR-30 SR-20 SR-10 PR-20 PR-10

*in mtrs

137

SR10 HD34 Basic Roof HD/FD34 roofs of 10x8, 8x6, 8x4 and 6x4m on four towers

SR10 HD34 BASIC ROOF The SR10 Roof consist of a HD/FD34 Ground Support on four HD/FD34 Towers and a Roof Structure of HD/FD34 Truss and Roof Ladder Supports. The PR10 Roof is a tower based structure with a saddle roof. This saddle roof has a relative high load bearing HD/FD34 Main Rig with an HD/FD34 roof structure with a fixed angle on the two HD/FD34 gables which enables you to re-build the roof in various dimensions. All the standard sizes 10x8m, 8x6m and 6x4m are to be build with FD34 and HD34 of which the HD34 increases the load bearing capacity of the SR10 Roof. As the ground support and additional roof is mainly built out of standard HD/FD 34 elements, only a few special roof parts are required to build a SR10 Roof. This makes the SR10 a very attractive and efficient roof system to acquire.

a Stage are Effective 2 24m2 m to from 80

The SR10 guarantees a good workable load and this combination ensures you of a minimum of trucking and storage space. This SR10 Roof can be lifted motorized or by manual chain hoists. The SR10 Roof is designed and calculated to be set up on single steel bases. The top canopy is tightened with tubes and ratchet straps and the wall canopies can be either in full PVC or the wind through mash. This roof meets all the required international standards and has been pre-calculated and comes with a full structural report and manual according the most recent regulations. Naturally PA Wings are available. AR-30 AR-20

SR-10 HD34 Basic Roof:

10x8

8x6

8x4

6x4m

SR-50

User Load Roof UDL:*

1.720

1.200

900

640

Towers:

SR-40

User Load Roof CPL:*

2.000

1.400

900

640

Main Grid:

frame 2x in kg:

1.000

Size:

Max. Wind Force:**

10 Bft

Options:

AR-10

SR-30 SR-20 SR-10 PR-20

User Load PA wing

Technical Specifications:

Roof Structure:

HD34 Tower GS HD34: 40x 40cm HD34/32 - 29x29cm 10x 8, 8x 6, 8x4 and 6x4m PA Wings

PR-10

138

*in kg I **Walls (side/back) must be removed if Wind Speed exceeds 72 km/hrs (9bft).

E: 8,50 m

D: 8,2 m

C: 7,0 m

A: 10,2 m

B: 7,8 m

B: 10,8 m

AR-30

SR-10 dimensions:

AR-20

10x 8m

8x 6m

8x 4m

6x 4m

A Inside Roof

10,2 x 7,8

8,2 x 5,8

8,2 x 3,8

6,2 x 3,8

SR-50

B Outside Roof

10,8 x 7,8

8,8 x 5,8

8,8 x 3,8

6,8 x 3,8

SR-40

C Clearance (side)

7,0

6,0

5,0

D Tower Height

8,2

7,2

6,2

8,5

7,3

6,0

Rooftop Height

AR-10

SR-30 SR-20 SR-10 PR-20 PR-10

*in mtrs

139

PITCH Roofs PR20

MT Pitch Roof

PR10

TT Pitch Roof

PR20 MT Pitch Roof MT roofs of 24x21, 20x15 and 16x15m on six or eight towers

PR20 MT PITCH ROOF The PR20 Roof consist of a MT Ground Support on eight (six) TD50 Towers and a Roof Structure of special tent profiles with integrated keder profiles. The PR20 Roof is a tower based structure with a pitched roof. This pitched roof has a standard cantilever and a special PA frame at the sleeve blocks of the front towers which can carry a PA Load of 3.000 kg each and is a working platform to slide in the outer keder canopy. This is a result of the fact that the towers are positioned under the roof structure in order to have a fully closed roof top. The special tent profiles make it possible to build the roof in various configurations as each canopy keder frame has the same size as the MT truss sections.

a Stage are Effective 2 240m2 4m to from 50

The Pitch Roofs are designed to be integrated in any kind of steel scaffolding stage. The wall keders can be hooked on the side of the scaffolding stage and have a double slit canopy so the lower part can be pulled up for maximum entrance space. This roof meets all the required international standards set by light & stage designers of concerts and events. Naturally PA Wings, Side Houses and Loading Docks are available by extending the roof. AR-30 AR-20

PR-20 MT Pitch Roof:

24x21

20x15

16x15m

Technical Specifications:

SR-50

User Load Roof UDL:*

36.400

39.000

33.700

Towers:

SR-40

User Load Roof CPL:*

33.600

27.800

Main Grid:

frame 2x in kg:

3.000

Size:

Max. Wind Force:**

10 Bft

Options:

AR-10

SR-30 SR-20 SR-10 PR-20

User Load PA wing

Roof Structure:

TD50 Tower GS MT 118x 78cm Keder Tent Profiles 24x21, 20x15 and 16x15m PA Wings, Side Houses

PR-10

142

*in kg I **Walls (side/back) must be removed if Wind Speed exceeds 72 km/hrs (9bft).

E: 11,0 m

C: 16,9 m

D: 12,9 m

A: 24,3 m

B: 21,2 m

B: 25,6 m

AR-30

PR-20 dimensions:

24x21

20x15

16x15

24,3 x 21,2 25,6 x 21,2 11

20,3 x 14,4 21,6 x 14,4 11

16,3 x 14,4 17,6 x 14,4 11

D Tower Height

12,9

16,9

16,7

A Inside Roof B Outside Roof C Clearance (side) Rooftop Height

AR-20 AR-10 SR-50 SR-40 SR-30 SR-20 SR-10 PR-20 PR-10

*in mtrs

143

PR10 TT Pitch Roof TT roofs of 24x15, 20x15 and 16x12m on six towers

PR10 TT PITCH ROOF The PR10 Roof consist of a TT Ground Support on six TD44 Towers and a Roof Structure of special tent profiles with integrated keder profiles. The PR10 Roof is a tower based structure with a pitched roof. This pitched roof has a standard cantilever and a special PA frame at the sleeve blocks of the front towers which can carry a PA Load of 3.000 kg each and is a working platform to slide in the outer keder canopy. This is a result of the fact that the towers are positioned under the roof structure in order to have a fully closed roof top. The special tent profiles make it possible to build the roof in various configurations as each canopy keder frame has the same size as the TT truss sections.

a Stage are Effective 2 192m2 0m to from 36

PR-10 TT Pitch Roof:

24x15

20x15

16x12m

Technical Specifications:

SR-50

User Load Roof UDL:*

17.500

24.400

19.300

Towers:

SR-40

User Load Roof CPL:*

20.000

21.600

Main Grid:

frame 2x in kg:

2.000

Size:

Max. Wind Force:**

10 Bft

Options:

AR-10

SR-30 SR-20 SR-10 PR-20

User Load PA wing

Roof Structure:

TD44 Tower GS TT 101x 58cm Keder Tent Profiles 24x15, 20x15 and 16x12m PA Wings, Side Houses

PR-10

144

*in kg I **Walls (side/back) must be removed if Wind Speed exceeds 72 km/hrs (9bft).

C: 12,9 m

C: 11,00 m

E: 16,5 m

A: 24,3 m

B: 21,2 m

B: 25,3 m

AR-30

PR-10 dimensions:

AR-20

24x15

20x15

16x12

A Inside Roof

24,3 x 21,2

20,3 x 14,4

16,3x14,4

SR-50

B Outside Roof

25,3 x 21,2

21,3 x14,4

17,3x14,4

SR-40

D Clearance (ground)

12,9

16,5

14,4

C Clearance (stage) Rooftop Height

AR-10

SR-30 SR-20 SR-10 PR-20 PR-10

*in mtrs

145

Stage Equipment Scaffolding Stage System Ballast Safe Foldable Ballast Tanks Ballast Solutions

Overview Stage Equipment

All under one roof!

STAGE EQUIPMENT Eurotruss is a specialist and total supplier of stage technology for your events. We will be more than pleased to accept the challenge and responsibility of accompanying all stage related products and designs beyond the point of sale to ensure a successful use and implementation. Central to our organisations' philosophy is providing maximum support in the area of training and high quality service. Only through the continuous exchange of ideas and experience with both customers and partners Eurotruss can provide detailed and well-informed solutions to the complexity in modern stage technology. In addition, Eurotruss offers product and servicing literature as well as online support. Our technical department is at your disposal to assist with the design and planning of elaborate structures and stage sets. Providing support at the planning stage, this technology allows the detailed display of designs and structures in three-dimensions.

Overview Stage Equipment

Besides that structural reports and static calculations can be supplied in cooperation with our engineering partners.

148

Steel scaffolding stage

Foldable Ballast Tanks

A modular designed stage system build on a standard steel scaffolding system. The perfect system to get a level stage floor to set up a roof system.

The foldable ballast tanks are the perfect ballast solution which is easy to stack with a minimum of self weight and volume.

Ballast-Safe

• 1 Ton Ballast for single and 2 tons ballast for double stack Ballast Tanks

A modular base section to integrate aluminium roof systems with scaffolding stages. • Reducing required ballast • Set up on a flat platform • Increased roof clearance (height)

• Limited trucking and storage space (5 Foldable Ballast Tanks = 1 pallet)

Next to the standard Bases and Ballast Safe Eurotruss also offers the Ballast Base which is a steel base on solid wheels and no outriggers or bars required. The base is designed to carry on either sides next to the tower the ballast (possible on euro pallets) or ballast tanks.

Ballast Compression Beams are handy to reduce the total required ballast per tower. Between the towers on the sides a steel compression beam is available and between the back towers a square truss is to be used as compression beam.

Overview Stage Equipment

Ballast Solutions

149

Scaffolding Stage System

How it works:

150

A few basic components - standard, ledger, diagonal brace, deck - form the basic for almost unlimited uses. Up to 8 connections can be made on one level - rosettes spaced very 0,5m

to create the structurally ideal joint. Four narrow openings in the rosette automatically centre the ledgers at right angles and create superior force transmittance.

Steel Scaffolding Stage

STAGE STRUCTURES The Eurotruss Steel Scaffolding Stage Structures start from a basic unit, each podium grows by the system dimensions (2x2m standard or 2,07x2,07m and 2,07 x2,57m) to the required size. Side guard rails (hand railing) and stairways available and easy to be build. The steel scaffoldings advantages in general: Basic Unit: Can be extended as required with various choices of layouts and levels. Substructure: High Load Bearing Capacity, rapid installation and dismantling, pallet packed. Practically-minded design: Strong connector technology, ergonomic handling, low-wear aluminium parts, corrosion-proof thanks to hot-dip galvanization, space-saving storage. The unique and highly flexible technology, proven in scaffolding construction, forms the basic for high-strength connections and supporting structures as Roof Systems. Due to its strength a steel scaffolding stage is capable of integrate the towers of the Roof System (using a Ballast Safe) and than the complete stage counts as ballast which reduces the need for additional ballast.

Key issues about steel scaffolding stages:

• The stage can adapt roof structure • Unlimited uses in heights, layouts, stairways and guard railing, weight and is a counter weight which reduces additional ballast

Scaffolding Stage System

• Easy and safe set up, high load bearing • Provide possibility to use standard stage decks and integrated Ballast capacity stage with guarantee of flat Safes. surface

151

Ballast Safe

Eurotruss Ballast Safe:

152

The Ballast Safe is an original Eurotruss concept and product which has proven itself during large in- and outdoor events, especially on Tours with Roof Systems and Steel Scaffolding Stage Structure. • Easy and safe set up on flat stage

• Cost effective solution as no standard bases are required • Stage can be build before Roof Set Up • Total height of Roof System can be enlarged. • Reducing Ballast, Perfect Position of guy wiring

Integrated Base in Stage

BALLAST-SAFE Ballast-Safe is an innovative and clever solution to connect the roof construction to a steel scaffolding stage structure. The Ballast-Safe consist of a Base, a Bridge and two Support Beams. The Ballast-Safe gives the benefit of reducing the total required ballast by taking the self weight of the stage structure. The stage construction must be a Steel Scaffolding Structure capable of taking horizontal and vertical loads. The Eurotruss Ballast-Safe is suitable to be integrated into a scaffolding structure. The support beams of the Ballast-Safe are equipped with steel wedge heads. A Ballast-Safe integrated in a roof/ stage structure has the following advantages: Use the self weight of the stage construction to reduce the total required ballast. In a scaffolding stage structure, a levelled platform exists to build on the roof system. There is more »clearance« (distance between ground and main rig). More »free access space« between the cross wiring (sides and back wall) when the Ballast-Safe is placed in the upper area.

How it works: Bridge is placed on which the Base can be mounted. All the parts of the Ballast-Safe must be bolted together. On the Base the female receivers must be mounted to attach the tower.

Ballast Safe

The Ballast-Safe will be integrated in a steel scaffolding stage construction by replacing two of the standard horizontal ledgers by two Support Beams. Between the two support beams a

153

Foldable Ballast Tanks

Eurotruss Foldable Ballast Tanks:

154

The Ballast ProfiÂŠ has many advantages due to its foldable design, low self weight, minimum of trucking space. The Ballast ProfiÂŠ is patented. Standard a single Ballast Profi can take 1000 ltr water which is equivalent to 1 Ton in kg.

By purchasing a stacking kit you can put a second Ballast Profi on top of the other one and you create a double stacked Ballast Profi which is equivalent to 2 Tons in kg Ballast.

The Volume Wonder

BALLAST PROFI Temporarily covered stages like roof systems and tent structures tend to require massive ballast even if the scaffolding stage is integrated. Standard trussing manufacturers do not always recognize the big impact of massive ballast requirements. Watertanks, concrete blocks etc take huge storage and trucking space as well as renting is not always possible and can be expensive. Eurotruss offers a solution using light, foldable Ballast Tanks as ballast which can be easily stacked with a minimum of self weight and volume. Your Solution: Ballast Profi

Ballast Weight: 1.000 or 2.000 kg Set Up Time: 4 Minutes Dimensions: 120x100x25cm (folded) Dimensions: 120x100x108cm (ballast) Code: RT-BP1 Single Ballast Profi 1 Ton RT-BP2 Stacked Ballast Profi Ton RT-STK Stacking Kit

Foldable Ballast Tanks

Technical Data Ballast Profi:

155

Ballast Solutions Ballast-Basement

Ballast Basement

156

Ballast is the necessary additional weight to make sure that a truss roof structure is kept in place and protected against wind forces, wind pressures, sliding or other hazards. In any roof the front, middle and rear towers require different ballast weight. The front towers normally requires much more ballast weight than the middle or rear towers.

Fact is that the ballast needs to be fixed the hazard of placing the ballast in the to the towers. In many occasions it is very wrong position which can cause dangehard to find the appropriate ballast fixed rous situations. to the tower. The Ballast Basement is made of steel powder coated black. Solid wheels enaBallast Basement is a solution which bles you to transport the ballast easily. enables you to fix the required ballast The ballast basement is available for the on the right spot to the tower. various tower types and can be used for Therefore the ballast basement prevents all kind of roof structures.

Ballast Solutions Ballast Compression Beam

Ballast Compression Beam much more ballast weight than the middle or rear towers. The towers of the roof structure in total needs less counter weight as the towers are all connected. The result is less ballast requirement per tower.

various sizes depending on the roof sizes. The ballast compression beams can be fixed at the steel tower basements.

To connect the both rear towers it is adviseable to use an aluminium truss as due to the long span, the steel ballast comThe ballast compression beam is made of pression beam will face a high bending The front towers normally requires steel powder coated black and come in force.

Ballast Compression Beam

157

Stage Decks Decks Legs Handrails Trolleys Stairs I Driveway Tribunes Accessories

Stage Platforms Decks 200x100cm Black Hexa anti-slip Plywood

Stage of the art

DECKS New deck 200x100cm is only 29 kg. Two longitudinal beams and a special profile design ensures full stability. Highest quality confirmed by TUV certificate which ensures maximum safety.

Decks 200x100cm Black Hexa anti-slip Plywood

Product code ED-T-SCA03-2X1 Black HEXA plywood

160

Measurements Deck 200x100cm Black Hexa anti-slip Plywood: Dimensions*: Load capacity: Plywood:

2,0 x 1,0m (standard) 750 / 500 kg/m2 12mm

Profile height: Weight:

90mm 29 kg

Stage Platforms The decks-system:

Corner view:

Bottom view:

7,5

Profile dimensions:

Deck to deck clamping:

ED-ACC-SCD24 Deck to deck clamping clamp

Deck to deck clamping clamp

ED-ACC-SCD01 Deck to deck standard clamp

Black hexa

Black

Brown

Gray

Wood

Decks 200x100cm Black Hexa anti-slip Plywood

Available Colours:

161

Stage Platforms Connection to steel Scaffolding

Your stage as system:

FULL COMPATIBLE After mounting SCD-28 beam adapter, deck 200x100cm is fully compatible with Scaffolding system.

ED-ACC-SCD29 Platform limiter

Connecting Stage Platforms

ED-ACC-SCD28 Scaffolding Beam Adapter, L=200cm

162

ED-T-SCA03-2X1 2x1m Deck

Stage Platforms Overview of Eurotruss Deck system

500

1000

Platform dimensions

2000 2000

1000

ED-T-SCA03-1X1 Deck 100x100cm - 18,3kg

ED-T-SCA03-2X05 Deck 200x050cm - 18,3kg

1000

500

1000

ED-T-SCA03-2X1 Deck 200x100cm - 32 kg

1000 2000

ED-T-SCA03-1X05 Deck 100x050cm - 11,8kg

2000

ED-T-SCA 03 Deck 100x200cm - 18,6kg

ED-T-SCA 03 Deck 100x100cm - 18,6kg

1000

45째

Weight varies depending on the angle

2000

Dimensions Stage Platforms

2000

45째

1000

Angle - in the range of 45 to 90 degrees

163

Stage Platforms Legs: Standard • Adjustable • Telescopic • On wheels

ROUND LEGS

DATA

STANDARD ROUND LEGS 48x3mm These elements allow constructions in different heights, thus permitting many possibilities for the realization your projects.

Ø48x3

The ordered leg height determinates the height of the platforms (H). Example of set legs height Code ED-SLR-02 ED-SLR-03 ED-SLR-04 ED-SLR-05 ED-SLR-06 ED-SLR-07 ED-SLR-08 ED-SLR-09 ED-SLR-10

Height 2000 300 400 500 600 700 800 900 1000

Weight 240kg 0,354kg 0,469kg 0,583kg 0,698kg 0,812kg 0,927kg 1,041kg 1,150kg

ROUND LEGS

DATA

ADJUSTABLE ROUND LEGS 48x3mm

These elements allow constructions in various heights, thus permitting almost limitless possibilities for the realization of creative ideas. Telescopic legs enable seamless height adjustment from H min to H max.

Round Legs

Height adjustment of telescopic legs

164

Code ED-SLR-ADJ-02 ED-SLR-ADJ-03 ED-SLR-ADJ-04 ED-SLR-ADJ-05 ED-SLR-ADJ-06 ED-SLR-ADJ-07 ED-SLR-ADJ-08 ED-SLR-ADJ-09 ED-SLR-ADJ-10

Height 200 300 400 500 600 700 800 900 1000

Weight 0,265kg 0,379kg 0,494kg 0,608kg 0,723kg 0,834kg 0,952kg 1,066kg 1,181kg

Stage Platforms Legs: Standard • Adjustable • Telescopic • On wheels

ROUND LEGS

DATA

TELESCOPIC ROUND LEGS

L max

H max

H min

These elements allow constructions in various heights, thus permitting almost limitless possibilities for the realization of creative ideas. Telescopic legs ensures a fluent regulation of the platform height in the defined range (between H min and H max). Height adjustment of TT telescopic legs in mm Code H min ED-TLR-45-60 450 ED-TLR-60-90 600 ED-TLR-90-140 900 ED-TLR-100-160 1000 ED-TLR-120-190 1200

ROUND LEGS

H max 600 900 1400 1600 1900

DATA

STANDARD ROUND LEGS

These elements allow constructions in different heights, thus permitting many possibilities for the realization your projects.

48x3mm + Castor (wheel)

The length of the leg given by the order sets the height of the platform dimension (H). Height adjustment of TTP telescopic legs Height 300 400 300 400

Round Legs

Code ED-SLC-03 ED-SLC-04 ED-SLC-03 ED-SLC-04

165

Stage Platforms Stair and Stage Handrails (incl 2 connectors)

For stairs and Stage:

HANDRAILS Aluminum handrails can be used with Deck 200x100cm. They are very durable at the same time very light. The additional bar is a protection against sliding for example flight cases. The handrails are available in the following sizes: 2m, 1m and 0,5m and connected by universal clamp (connector).

1868

157

1203 1112

Ø35

Platform level

ED-SHR-SBA-5

HAND RAILING 200cm incl connectors, weight: 4,68kg I material: aluminium Ø 35 x 2,0mm I finish: raw surface

868

157

1203 1112

Ø35

Handrails

Platform level

ED-SHR-SBA-5

HAND RAILING 200cm incl connectors, weight: 4,68kg I material: aluminium Ø 35 x 2,0mm I finish: raw surface

166

Stage Platforms Handrails with Plexiglas for SCA-01 and SCA-03

SCA-01 and SCA-03:

HANDRAILS Steel handrails with glass can be used with Decks. Perfect viewing stations for the disabled people, the VIP boxes, shopping malls and trade fair construction.

ED-SHR-SBP-5

HAND RAILING 200cm with Plexiglass incl connectors, weight: 17,7kg laminated glass and black or stainless steel I finish: zinc plated or powder coated steel

Handrails for SCA-01 and SCA-03

ED-SHR-SBP-6

HAND RAILING 100cm with Plexiglass incl connectors, weight: 8,53kg laminated glass and black or stainless steel I finish: zinc plated or powder coated steel

167

Stage Platforms

263

962

Transport trolleys with changeable modules

2296

1020

2018

ED-TROL-ED Trolley for deck

For decks and railings:

TROLLEYS Raw Steel Trolleys to be used for transport purpose of Eurotruss Decks and / or Handrailings.

1514

Trolleys can be used for every type and size!

2296

1020

Transport trolleys

2018

ED-TROL-HR Trolley for hand-railing

168

Stage Platforms Stairs and aluminium adjustable stairs foot

Quick and smooth assembly

STAIRS Adjustable stairs ensure quick and smooth assembly.

H max H min

They are made of heavy-duty steel sections. The stairssteps are filled with anti-slip plywood.

950 1114 Adjustable stairs ED-AS-SPS01-7 ED-AS-SPS01-6 ED-AS-SPS01-5

H min from 1.000 to 1.800mm H max I Dimension 2.645mm I Weight: 77kg I Material: Steel I Surface: Raw H min from 800 to 1.400mm H max I Dimension 2.335mm I Weight: 67kg I Material: Steel I Surface: Raw H min from 600 to 1.000mm H max I Dimension 2.025mm I Weight: 59kg I Material: Steel I Surface: Raw

Adjustable stairs foot

with rubber

Stairs and adjustable stairs foot

169

Stage Platforms SM - Stairs

Modular as easy:

SM - STAIRS Modular stairs with all steps of the same height; available in four different heights. The stairs have adjustable feet which make it possible to place and level the stairs on uneven surfaces. The material of the construction is welded from steel profiles, the steps are made of 15mm plywood by a foot adjustment-range of 20mm.

Handle rails

Connecting stair steps

SM - Stairs

Attachment to the platform

170

Modular Step Stairs EDS-SM-02 EDS-SM-04 EDS-SM-06 EDS-SM-08

STAIRS 1st PART 20cm I Height: 200mm I 1 Step I Weight: 8,50kg STAIRS 2nd PART 40cm I Height: 400mm I 2 Steps I Weight: 20,0kg STAIRS 3rd PART 60cm I Height: 600mm I 3 Steps I Weight: 12,30kg STAIRS 4th PART 80cm I Height: 800mm I 4 Steps I Weight: 13,45kg

Stage Platforms SM - Stairs and Handrail

350

400 200

600

800

675

EDS-SM-04 Stairs 1st part 20/40cm

EDS-SM-06 Stairs 2nd part 60cm

EDS-SM-08 Stairs 3rd part 80cm

1237 83

1645

2050

1978

Handrail for 3-step stairs

Handrail for 4-5 step stairs

ED-SHR-SBA-S1 weight: 7kg, material: steel tube Ă&#x2DC; 35 x 1,5mm finish: galvanized, option - powder coating

ED-SHR-SBA-S2 weight: 9kg, material: steel tube Ă&#x2DC; 35 x 1,5mm finish: galvanized, option - powder coating

800 600 400 200

350

990

SM - Stairs and Handrail

675 1000 1325

171

Stage Platforms Driveways

Multi purpose:

DRIVEWAYS Very stable and durable driveway. Possibility to connect several modules makes it multipurpose

Code:

L (mm)

ED-DRW-02 2688 ED-DRW-03 4646,3 ED-DRW-04 6609

N (째)

H1 H2 Width Weight (mm) (mm) (mm) (kg)

9,7-14,9 10,3-13,0 10,3-12,6

463 826 1200

643 1009 1400

1000 1000 1000

53,41 116,92 174,51

L M M

Driveways

172

N째

731

Stage Platforms Access & disable ramp

Ramp Handrail

Ramp Platform (standard decks)

Ramp Frame

Ramp Leg 6609 1995 1995

1400

1000

10,3°

12,6°

731

1200

1995

4646,3

1995 1995

2688

643

463

1000

14,9 °

9,7 °

Access & disable ramp

13°

10,3°

826

731

1009

1995 731

173

Stage Platforms Tribunes

Multi purpose:

TRIBUNES EUROTRUSS tribunes are made of stage platforms and their configuration depends on the customer's requirements. They are very functional as they can be easily transformed into a stage.

Tribunes

They are fully professional, meet the requirements stipulated in applicable standards and are safe.

174

Tribunes

175

Stage Platforms

Accessories - Clamps

Ø48,3 83,3

83,3

Ø48,3

120,4

94,4

181,2

155,2

ED-ACC-LTLR-S Leg to Leg Clamp Round Leg - Single Standard

ED-ACC-LTLR-S1 Leg to Leg Clamp Round Leg - Single for Overlap

181,2

Accessories Clamps

120,4

210,2

120,4

Ø48,3 ED-ACC-LTLR-D Leg to Leg Clamp Round Leg - Double

176

Stage Platforms Accessories - Clamps and inserts

9,4

M8/M10

ED-ACC-SCD04 Assembly insert, weight 0,050kg

ED-ACC-SCD03 Self Leveling Insert, weight 0,013kg

85 57

ED-ACC-SCD-18 Handrailing link

ED-ACC-SCD19/M8 Double insert, weight 0,012kg

137 72

50 M10

ED-ACC-SCD01 Deck to deck clamp

ED-ACC-SCD01/A Deck to deck clamp

Accessories Clamps and inserts

143

177

Stage Platforms Accessories

147 97

14,1

ED-ACC-SCD24 Deck to deck - Clamping clamp, weight 0,080kg

ED-ZH 0059.02

1000

ED-ACC-SCD02 Hand railing assembly clamp, weight 0,74kg

426 290

15째

319 ED-ZH 0059.03

426

1800

290

Accessories

15째

ED-ZH 0059.02

533,7

ED-ZH-059 Modular ladder, weight 5,27kg

178

Stage Platforms Accessories

ED-SPR-PDS-2 Jib locking pin

ED-SPR-SPS-1 Jointed steps bolt

ED-SPR-SPS-2 Complete jointed steps grip

ED-SPR-SL-1 Telescopic round leg foot

ED-SPR-TL-1 Round leg regulated foot

ED-SPR-TL-2 Telescopic leg knob

ED-SPR-SCA-2 Pipe stopper

ED-SPR-SCA-1 Aluminium corner base

ED-SPR-SCA-6 Aluminium corner holding block

ED-SPR-SCA-5 Aluminium corner knob

ED-SPR-SCA-3 SCA-01.03.10 t-bolt

Accessories

ED-SCD-28 Beam adapter

ED-SCD-29 Platform limiter

179

Eurotruss Headquarter Castorweg 2 Nl-8938 BE Leeuwarden - The Netherlands Tel: +31-58 - 215 88 88 www.eurotruss.com

• •

Fax: +31-58 - 215 8111 E: info@eurotruss.com

Eurotruss Catalogue Edition 14

Catalogue Trussing Systems Roof Systems Stage decks