FLATFROG
MULTITOUCH 3200 Quick Assembly Guide
Document Number LZN 100013 R1A Issue 2012-05-31
Industrial Design Casing Parts List
Package contents – Industrial design casing.
The following items are included: a) Industrial design casing b) Screws (22 pieces)
Page 2 of 10
Sofa Height Legs Parts List
Package contents – Sofa height legs.
The following items are included: a) Sofa height legs (2 pieces) b) Screws (6 pieces) c) Center pieces (2 pieces) d) Feet (2 pieces) e) Adjustable feet with spring and plastic cap (2 pieces) f)
Cable duct (1 piece)
Page 3 of 10
Bar Height Legs Parts List
Package contents – Bar height legs.
The following items are included: a) Bar height legs (2 pieces) b) Screws (6 pieces) c) Center pieces (2 pieces) d) Feet (2 pieces) e) Adjustable feet with spring and plastic cap (2 pieces) f)
Brackets for floor mounting (2 pieces)
g) Cable duct (1 piece)
Page 4 of 10
On-wall Assembly Parts for on-‐wall assembly are not included with your FlatFrog Multitouch 3200. The following are recommended: VESA mount of type 200 x 200 mm with M6 bolts. Industrial design casing according to section 3.2 Industrial Design Casing in the owners guide.
The VESA mount can be purchased in any well-‐stocked electronics store or department store.
Assemble the industrial design casing.
1. Position your FlatFrog Multitouch 3200 (a) on a smooth surface, with the multi-‐touch screen downwards. 2. Assemble the industrial design casing (b) by fastening all the 22 screws (c), 5 in each corner and one at each long side, without tightening the screws (c). 3. Tighten the screws (c) one by one. 4. Assemble your FlatFrog Multitouch 3200 on the wall by carefully following the instructions from the producer of the VESA mount. Page 5 of 10
Stand Alone Assembly – Bar Height
Assemble the 2 legs by the 2 center pieces.
1. Position the 2 legs (a) with the center parts facing each other. 2. Assemble the legs to each other by the 2 center pieces (b) using the 6 screws (c), without tightening them. 3. Assemble the 2 feet (d) and the 2 adjustable feet with spring and plastic cap (e).
Page 6 of 10
Assemble the legs and the industrial design casing.
1. Position your FlatFrog Multitouch 3200 (f) on a smooth surface, e.g. a thick cloth, with the multi-‐touch screen downwards. 2. Position the industrial design casing (g) on your FlatFrog Multitouch 3200 (f), without fastening the screws. 3. Lift the assembled legs (h) and carefully position them on the industrial design casing (g). 4. Assemble the industrial design casing (g) by fastening all the 22 screws (i), 5 in each corner and one at each long side, without tightening the screws (i). 5. Tighten the screws (i) one by one.
Page 7 of 10
Collect the cables in the cable duct.
1. Remove the protective cover for the adhesive, from the flat part of the cable duct (j). 2. Attach the flat part of the cable duct (j) to the inside of the leg (k) closest to the connection panel. Attach the flat part of the cable duct (j) on the middle of the leg so that there are similar amounts of the leg visible at each end. 3. Collect the cables including the power supply cable and pull out enough cable to reach the connection panel (l), but do not connect the cables. To see which cable to use, see section 5 Connecting to a Windows 7 PC via USB or section 6 Connecting via Ethernet using TUIO in the owners guide. 4. Collect the cables inside the curved part of the cable duct (m), and snap it to the flat part of the cable duct (j).
Page 8 of 10
Your FlatFrog Multitouch 3200 with bar height legs.
1. Turn your FlatFrog Multitouch 3200 to an upright position. 2. If necessary, adjust the 2 adjustable feet (n) to make your FlatFrog Multitouch 3200 stable. 3. Mount the brackets (o) to the floor with screws suitable for the floor. 4. Keep the power supply and the power supply cable in a way that they are out of the way for the users of your FlatFrog Multitouch 3200.
Page 9 of 10
Stand Alone Assembly – Sofa Height Assemble according to Stand Alone Assembly – Bar Height. The assembly procedure is identical; the only difference is the height of the legs and that there are no brackets for floor assembly.
Warning Read 2 Safety in section 2 safety in the owners guide completely before assembling your FlatFrog Multitouch 3200 with possible accessories. Caution Complete assembling before starting your FlatFrog Multitouch 3200 and connecting it to a computer. Caution For all different alternatives for assembly: the socket outlet has to be installed near the equipment and has to be easily accessible.
Page 10 of 10