SUMMARY 2 to 12
Entrance matting About ÂŤEntry CleanÂť ................................................................................... Matwell Frames ........................................................................................... Order Form .................................................................................................. Warning Strips..............................................................................................
13 to 20
Coverstrips Invisible fixing .............................................................................................. Coverstrips .................................................................................................. Edges .......................................................................................................... Adaptation profiles ...................................................................................... Other profiles................................................................................................
21 to 52
P.86 p.87 p.88
Flooring Tools Cutting ........................................................................................................ Measuring drawing . .................................................................................... Stapling ....................................................................................................... Adhesive tapes and tools ............................................................................. Wall floor smoothing ................................................................................... Handling . .................................................................................................... Personal Protection Equipment .................................................................... Power tools ................................................................................................. Floor cleaning...............................................................................................
119 to 139
P.53 p.62 p.64 p.68 p.74 p.75 p.76 p.77 p.78 p.80 p.82
Blades Knife blades . ............................................................................................... Cutter blades .............................................................................................. Scraper blades - industrial - security ....................................................................
89 to 118
P.22 p.29 p.39 p.39 p.40 p.46 p.50 p.51
Subfloor preparation Floor stripping ............................................................................................. Wall stripping .............................................................................................. Mixing and application of screeds ................................................................ Sanding and finishing .................................................................................. Fine dust vacuum cleaners ........................................................................... Moisture treatment . .................................................................................... Heating ....................................................................................................... Air treatments ............................................................................................. Moisture control measurement .................................................................... Tools for External thermal insulation . ........................................................... Installation of plasterboards..........................................................................
84 to 88
P.15 p.16 p.18 p.19 p.20
Finishing profiles Profiles for laminate flooring and parquet .................................................... Stair-nosings ................................................................................................ Stair rods ..................................................................................................... Profiles for carpet stretching ........................................................................ Wall protection and wall finishing ................................................................ Expansion profiles ........................................................................................ Ceramic profiles . ......................................................................................... Accessories...................................................................................................
53 to 83
p.2 p.9 p.10 p.12
P.90 p.98 p.103 p.104 p.108 p.110 p.112 p.114 p.118
Special Equipment Laminate and parquet floor laying ............................................................... Scribing and cutting PVC/lino flooring . ........................................................ Cold welding PVC/lino flooring .................................................................... Hot welding PVC/lino flooring . .................................................................... Carpet stretching ......................................................................................... Tiling installation...........................................................................................
P.120 p.128 p.129 p.130 p.138 p.139
This logo means that the product can be hung up on tools or profiles display shelves. All the items are identified with their reference, designation and barcode.
1
ENTRANCE MATTING
ENTRY CLEAN
ANDARD GUIDELINES COMPLIES WITH ST BLED PEOPLE FOR ACCESS BY DISA
About Entry Clean ENTRY CLEAN ENTRANCE MATS
OLD REPLACE YOUR FOOT WIPER!
- HYGIENIC: Retained dust does not penetrate deeply as in the case of a brush mat, so these mats make regular maintenance easy. BEFORE - DESIGN: Mats fit the entrance hall’s décor perfectly. - PROTECT ENTRANCE HALL FLOORINGS: Mats stop dust (which can otherwise abrade floor tiles, parquet flooring and carpets), as well as wet brought in from outside on shoes. - HARDWEARING AND RIGID: Perfectly suited to areas of heavy traffic, or wheelchair traffic. - LONG LIFE: The mat soon pays for itself, especially when properly maintained. AFTER
HOW TO CHOOSE YOUR ENTRANCE MAT ? ENTRY CLEAN and ROMUS entrance mats (which can be combined) were designed with one object: to stop dust, wet, &c. brought in on visitors shoes, and prevent soiling or premature wear of indoor flooring. 1- TRAFFIC VOLUME:
frequent (500 people passing per day) or heavy traffic (more than 500 people / day),
2- LOCATION:
indoors or outdoors (covered),
3- PURPOSE:
• to absorb: • to scrape: • to wipe:
4- INSTALLATION:
• in a mat well, with a sealed frame or a frame that can be inset, • at ground level, surrounded by a ramp frame for an even slope.
5- THICKNESS:
Three thicknesses available, to suit practically any situation: • 12 mm • 18 mm • 22-25 mm.
6- STRUCTURE:
- Rigid and dense designed for heavy loads and intense traffic. The mats are supplied in segments 50 - 60 cm wide. - Open, can be rolled up: the dust passes through the holes in the mat; easy maintenance - just roll up the mat and vacuum the dust collected inside the well.
all or most of the wet from footwear, outdoor mess off footwear, damp and residues (dirt, gravel) off footwear.
7- DELIVERY.
MAT
THICKNESS
ROBUST
23 mm
ROBUST JUNIOR
12 mm
TRAFFIC
LOCATION
PURPOSE
STRUCTURE
PAGE
FREQUENT
INDOORS
SCRAPES ABSORBS
RIGID CLOSED
4
INDOORS
SCRAPES ABSORBS
ROLLS UP OPEN
5
ROLLS UP OPEN
6
RIGID CLOSED
7
ROLLS UP OPEN
8
ROMAT CARPET 12- 17- 22 mm
FREQUENT
ROMAT FLUTED DESIGN CARPET DESIGN RUBBER DESIGN BRUSH
12 - 22 mm 15 - 25 mm
HEAVY TRAFFIC FREQUENT
REVERSIBLE FLUTED REVERSIBLE PRO-ACTIVE
18 mm
BRUSH
22 mm
INDOORS / OUTDOORS INDOORS
REVERSIBLE SUPERIOR 12 - 18 mm
INDOORS / OUTDOORS INDOORS
HEAVY TRAFFIC
HEAVY TRAFFIC
SCRAPES ABSORBS SCRAPES SCRAPES ABSORBS
INDOORS
SCRAPES
INDOORS
SCRAPES ABSORBS
INDOORS
SCRAPES
FOR ORDERING ENTRANCE MATTING Please use the Order /Quotation Form on page 10, following the instructions and details given there.
2
SCRAPES
ENTRANCE MATTING
General
P.2
Robust -Robust Junior
P.4
Romat
P.5
Design
P.6
Reversible
P.7
Brush - Grating
P.8
Matwell frame
P.9
Order Form
P.10
Chairmats
P.11
Danger warning strips
P.12 3
ENTRANCE MATTING
ENTRY CLEAN
Robust - Robust Junior C-
SHORT MANUFA
>> CONSTRUCTION:
ME «ROBUST» and «ROBUST JUNIOR» entrance matting is TURING LEAD TI made of mill aluminium profiles fitted into each other, with glued-on dust barrier inserts. These profiles form 50 cm wide plates (walking direction), put side by side in the hollow, easy to remove for maintenance.
>> MAINTENANCE:
«ROBUST» and «ROBUST JUNIOR» entrance matting needs to be cleaned regularly with a vaccum cleaner. In heavy duty use, cleaning is also possible with a high pressure water-spray plate by plate.
>> AVAILABLE COLOURS ARPET DUST BARRIER C AND INSERTS, SCRAP ABSORB
PURPOSE: SCRAPES / ABSORBS (moisture). LOCATION: INDOORS TRAFFIC: FREQUENT NONSLIP / EXTREMELY STABLE STRUCTURE ALU CLOSED MADE TO MEASURE ANTHRACITE
Robust ROBUST
Thickness: 23 mm. Heavy traffic use
Simple 23
24
8515
15
Anthracite
Wide 23
78
8525
13
Anthracite
Robust Junior ROBUST JUNIOR
Thickness: 12 mm
Simple 12
38,6
8615
Anthracite
Wide 12 95
8625
4
Anthracite
ENTRANCE MATTING
ENTRY CLEAN
Romat CSHORT MANUFA E M TURING LEAD TI
>> CONSTRUCTION: ROMAT
matting is made of heavy duty polypropylene dust barrier textile strips, inserted in raw aluminium profiles sections. These sections are linked together with semi-rigid PVC strips underneath, deadening traffic noise and allowing rolling up of the mat.
>> MAINTENANCE:
Dirt passes between the profiles and falls into the mat well. The mat can easily be rolled up for vacuuming. PURPOSE: SCRAPES + ABSORBS MOISTURE LOCATION: INDOORS TRAFFIC: FREQUENT OPEN STRUCTURE: dust falls into the mat well ROLLS UP ATTRACTIVE AND DECORATIVE MADE TO MEASURE
Open structure
ROMAT 12 mm
Rollable
3 INSERTS
LOOP PILE
100% Polypropylene Available on 12 - 17 - 22 mm ROMAT mats FLUTED PVC Black 8950
W
!!
ROMAT 17 mm
FLUTED PVC Black 8951
NE W
LOOP PILE Anthracite 8910 Grey 8911 Blue grey 8912 Sisal shade 8913 Red 8914
!!
NE W
CARRERA Anthracite 8930 Blue 8931 Brown 8932 Red 8933
NE
LOOP PILE Anthracite 8900 Grey 8901 Blue grey 8902 Sisal shade 8903 Red 8904
!!
Red
Anthracite
Grey
Blue grey
Sisal shade ATTRACTIVE
CARRERA
100% Polypropylene Available only on 12 mm ROMAT mat
Anthracite
Blue
ROMAT 22 mm Red
FLUTED PVC FLUTED PVC Black 8952
NE W
LOOP PILE Anthracite 8920 Grey 8921 Blue grey 8922 Sisal shade 8923 Red 8924
Available on 12 - 17 - 22 mm ROMAT mats Black
!! 12 mm
5
ENTRANCE MATTING
ENTRY CLEAN
Design
3 INSERTS
>> CONSTRUCTION:
1 BRUSH
>> MAINTENANCE:
3 POLYAMID TUFTED CARPET
PURPOSE: SCRAPES “DESIGN” matting is made of heavy duty dust barrier textile LOCATION: INDOORS/ OUTDOORS strips, inserted in raw aluminium profiles sections. These POLYAMID 6.6 sections are linked together with soft PVC strips. 2 RUBBER The rubber strips laid under the profiles also deaden traffic noise. PURPOSE: SCRAPES - ANTI-SLIP LOCATION: INDOORS / OUTDOORS
Dirt passes between the profiles and falls into the mat well. The mat can easily be rolled up for vacuuming.
TRAFFIC: Frequent OPEN ALU STRUCTURE: Dirt falls into the mat well. ROLLS UP ATTRACTIVE AND DECORATIVE MADE TO MEASURE
PURPOSE: LOCATION: FLECKED
SCRAPES - ABSORBS INDOORS ABSORBES UP TO 6.5 L / M2
Grey/Brown
Grey/Blue
Grey/Light grey
Anthracite
Grey/Red
Carpet
DESIGN
8325
Anthracite 8327
Grey
Rubber
Other colours available on request
8305
Black Brush
8330
Black
8331
Grey Combined
8309
Let us know your specifications
(eg. 1 grey carpet insert + 1 black rubber insert) 30
4
NE W
Textile and Brush inserts
8323
!!
Anthracite
Other colours on request 19
DESIGN JUNIOR
30
4
8335
Carpet
Anthracite 8337
Grey / Light grey Rubber
Other colours on request 22,2
8345
12 40
Brush
4
Black
8355
Black
8356
Combined
Grey
8349
Let us know your specifications
6
(e.g. 2 anthracite carpet inserts + 1 black brush insert)
ENTRY CLEAN
Reversible HEAVY TRAFFIC
CSHORT MANUFA E M TI TURING LEAD
>> CONSTRUCTION:
«REVERSIBLE» matting is made of inserts fitted between two raw aluminium profiles. The whole matting is assembled with galvanized steel rods.
>> MAINTENANCE:
Dirt from shoes is removed by the profile edges and falls between the absorbent inserts, allowing thus easy cleaning by vacuuming. Being reversible, these mats can also be turned regularly.
3 INSERTS
Superior
Purpose Location Traffic
Cut
Single Grey
15
15
NE W
Single Thickness 12 mm 15
Double
Ref.
8000 8011 8012 8013 8014 8016
8002
12
Single Colour
OUTDOORS / INDOORS
COLOUR Grey Blue Burgundy Yellow Green Black
Thickness 18 mm 18
!!
Scrapes
CLOSED - Dirt withheld on profiles Coextruded ultra RubbER, buffed rigid PVC with heavy polyamide fibres FlutED rubber traffic carpet 100 % (carpet effect) nylon MADE TO MEASURE
Insert
Single
Fluted
INTENSIVE: including wheelchairs and trolleys
Structure
SUPERIOR INSERT
Pro-Active
SCRAPES, ABSOBS (damp from shoes) INDOORS AND COVERED SPACES
Grey
15
Thickness 18 mm
8005 18
Double Grey
Grey 30
Double
15
Thickness 12 mm
8007
12
30
15
Grey
PRO ACTIVE INSERT Single
Thickness 18 mm
8020
Grey Zebra
18
15
FLUTED INSERT
Single
15
Thickness 18 mm
8030
Black
18
15
Single
15
Thickness 12 mm
8031
12
Black 15
15
7
ENTRANCE MATTING
ENTRY CLEAN
Brush >> CONSTRUCTION:
PLAIN COLOURS
«BRUSH» mats are made of 15 X 15 mm PVC profiles with dust-trapping brush inserts (6.6 nylon fibres). The sections are linked together with stainless steel cable.
>> MAINTENANCE:
The dirt passes through the profiles and falls into the mat well. The entrance mat can easily be rolled up for vacuuming. Purpose: Location: Traffic: Open aluminium structure: Rolls up Attractive and decorative MADE to measure
Scrapes Indoors / Outdoors heavy traffic dirt falls into the mat well
Brush
8730
Ref.
8710 8711 8712 8713 8714 8715 8716 8717 8718 8719 8720 8721 8722
Black 9005 Dark grey 7043 Light grey 7040 Brown 8017 Yellow 1006 Beige 1002 Dark green 6005 Green 6029 Mint green 6027 Blue 5022 Dark red 3003 Red 3020 Orange Combined colours to precise
8725
Quote on request
BRUSH LOGO
Have your own logo (up to 5 colours + one background colour). Just send us an .eps file» and we’ll quote a price very quickly.
Thickness 22 mm
QUOTE ON REQUEST
22
15 15
4
Romustep tiles >> CONSTRUCTION:
«ROMUSTEP» is made from the radial structure of recycled lorry, bus and aircraft tyres. This consists of rubber reinforced by nylon fibres, surface-scraped to show a synthetic down. «ROMUSTEP» underneath is a glass fibre canvas layer, which helps it stick perfectly when glued. Weight: 9 kg / m2.
>> MAINTENANCE:
In heavy traffic areas, «ROMUSTEP» must be cleaned daily with a vacuum cleaner or hard brush. It may also be shampoo- cleaned by the brush/vacuum process.
ROMUSTEP TILES
PURPOSE: SCRAPES DIRT/ABSORBS DAMP LOCATION: INDOORS TRAFFIC: HEAVY TRAFFIC: Light vehicles, trolleys NONSLIP/ROT-PROOF
Thickness 10 mm 10
TILES TO STICK than adhesive
Use a polyure
8200
Tile 10
Dimensions: 30.5 x 30.5 cm.
Rubber gratings Th. 23 mm
Th. 11 mm
Thickness 23 mm PLATE 1.50 x 1 m 8755 Bracket 8756
8
Thickness 11 mm PLATE 1.50 x 1 m 8750
ENTRANCE MATTING
MATWELL FRAMES
To be sealed Metal profiles to be set into the floor. The single 17/23 model can be laid either way up, providing a frame for 17 mm or 23 mm thick brush mats.
MATWELL FRAME CUT TO MEASURE* Matwell profiles, cut to measure but unassembled, can be rapidly supplied. This allows installation to go ahead while waiting for delivery of the entrance mat. Supplied without corner angle and without fixing feet.
MATWELL FRAME 17 or 23 mm 6
LENGTH 4.00 m Alu silver
17
Brass
6100
*available only when also ordering ROMUS mats
6101
17-23 mm
13 mm
Alu silver
6105
6107
Brass
6106
6 23
16103
Feet To be set into the concrete floor. Pack of 8.
MATWELL FRAME 13 mm 6
16104
LENGTH 4.00 m 13
Alu silver
Corner angle
6113
To make the frame. Pack of 4.
15
On the floor 6115
BEVELLED ACCESS PROFILE
Thickness 20 mm
Especially suited when theres no recess. Ensures an attractive secured finish. To be mounted on perfectly flat surfaces.
Alu silver Length: 3.00 m.
16117
Corner angle Pack of 4. Matwell frame is assembled with Corner angles.
20
47
6114
Thickness 13 mm Alu silver Length: 4.00 m.
16119
Corner angle
12
Pack of 4. Drilled
60
15
9
ENTRANCE MATTING
USE THIS ORDER FORM
PHOTOCOPY ORE DOCUMENT BEF COMPLETING IT
A
Entry Clean
Date:............................................................................................. COMPANY:.................................................................................... Contact person:............................................................................. Address:........................................................................................ .....................................................................................................
or ask To place an order for a quote:
the «PURCHASE ORDER» or «QUOTE» box at 1 Tick the top of this page, then give the reference number and description of the carpet required.
measuring, make sure that: 2 Before - the floor is flat
- the matwell frame is already installed
..................................................................................................... .....................................................................................................
DV IC E
a drawing of the shape of the carpet in 3 Make the box below. La
Telephone:..................................................................................... Email............................................................................................. P
PURCHASE ORDER (checkbox)
QUOTE
P D1
D2
La
WHICH MAT? Reference n°
Description
sketch must contain the following dimensions: 4 Your • both widths (La),
METAL FRAME Reference n°
• both lengths (P), • one diagonal, very important as the recess or mat may not be square • the walking direction (so as to determine the direction of the strips) • specify the exact position of the door.
Description whether you have already subtracted 5 •theSpecify gap at each side of the frame. • Specify the width and position of the door. This will help if we are to manufacture the mat in three parts
MAT MEASUREMENTS
PLEASE INDICATE IF THE DIMENSIONS ARE: (Check box)
mm
DIMENSIONS INSIDE THE MATWELL FRAME
La
dimension
NET ENTRANCE MATTING DIMENSIONS P
P
D1
mm
mm
DOOR WIDTH
Indicate door position by drawing on the dotted lines
mm
DOOR POSITION
to draw on the dotted lines
La Door position
10
mm
FLOOR PROTECTION MATS PREPARING MEASUREMENT AND YOUR QUOTE
SPECIAL SHAPES 1 • For special shapes, please provide a made of flexible
material (rolled up), indicating which is the upper side when unrolled, as well as the walking direction.
ENTRY CLEAN mats are generally made in one piece. However, in the case of mats exceeding: - 2 m in width (ROMAT ROBUST ROBUST JUNIOR) or - 2.30 m in width (REVERSIBLE - DESIGN - BRUSH) - 40 kg in weight
we manufacture them in several parts.
In this way we avoid putting a joint in the middle of the mat, just where traffic is heaviest (it also doesn’t look so good).
2 • FOR ANY SIZE:
- NON RIGHT-ANGLED – SPECIFIC SHAPES
THE AREA QUOTED/INVOICED WILL BE THE AREA OF THE RECTANGLE CONTAINING THE MAT’S SHAPE.
Examples of manufactured mat widths.
10% EXTRA WILL BE CHARGED
3 • Please contact us if you need any additional information, or would like a quote for a non-rectangular shape
OK
NOT OK
That is why it is important to let us know the door width
Polycarbonat Chairmats On hard floor
On textile flooring
GUARANTEE 5 YEARS DOES NOT GO YELLOW
FLAT
Rectangular shape with rounded corners
For parquet, PVC…
SPIKED
For carpets…
94800
94810
90 x 120 cm
90 x 120 cm
94802
150 x 120 cm
To protect floors from wear and tear caused by office chairs and armchairs. Made in Polycarbonate, robust, yellowing and UV resistant. Containing no PVC, 100 recyclable, suitable for heated floors. Nonslip, perfect grip on flooring. Thickness: 1.7 mm for smooth mats. 2 mm for spiked mats.
94812
150 x 120 cm
11
DANGER WARNING STRIPS THE LAW: A REMINDER 1 2 3
SOLUTIONS VIGILINE WARNING STRIPS 10 cm ADHESIVE TAPE STAIR-NOSINGS
When placed at the top of a flight of stairs, 0.5 m from the first step, this floor covering alerts people by means of a tactile change underfoot as well as a visual contrast. First and last steps must be provided with a visually differentiated 10 cm riser. The stair-nosing must meet the following requirements: it must contrast visually with the rest of the stairs, be nonslip, and not overhang the riser by too much
see p. 33, 34, 35
Warning Strips 800 mm
COMPLIES WITH98351 STANDARD NFP
VIGILINE
420 mm
5m 800 mm
2 mm 20 mm 3 mm
420 mm 5 mm
Romus tactile tiles warn people that a flight of stairs, a road crossing or some other hazard is ahead. The small humps arranged in a diagonal grid pattern give a warning to stop in front of the obstacle. These tiles have been specially developed to make it safer for the blind and partially sighted to move around.
TECHNICAL DATA
ECOLOGICAL INFORMATION
- Rot-proof and resistant to damp, fungus and microbial attack. - Nonslip, hard-wearing and easy to install. - Wide choice of colours, to provide visual contrast for the old or partially sighted, and to fit in with the décor. - White sticks make a dull sound on this material, contrasting with the sound of the rest of the flooring. - Bevel-edged strips. - Fire class M2 – Marine class - Suitable for heated floors - Weight 1.5 Kg
GREEN PRODUCT
- VIGILINE products are recyclable and will not harm the environment. - The manufacturing process is guaranteed by the DRIRE to meet the most stringent European environmental standards. - Made without CFCs, dioxins, solvents or phthalates. HQE process. - Pollution potential: v. low. - Resistance to natural breakdown: very high; v. slow biodegradability.
2 mm
to stick
7 mm thick Dim. 80x42 cm NATURAL RUBBER
White
4250
Light grey
4251
Dark grey
4252
INSTRUCTIONS FOR APPLICATION Before laying, make sure that the floor is clean and dry. Sustainable fixing: with bi-componant polyurethane adhesive.
RAL COLOURS . AVAILABLE MIN 6 PIECES
Strip to assist in orientation
ADHESIVE TAPE 10 cm
Polyurethane adhesive strips on rot-proof non-woven polyester. Width 100 mm. Thickness 1 mm Standard EN14041 (LNE) BF1 S1
12
To stick. Made of 2.5 mm thick anti-slip rubber
THE LAW: A REMINDER
The pathway must offer a visual and tactile contrast (70% difference between the pathway and the background)
NE W
GUIDELINE
RUBBER
Dim 175 cm x 11 cm
Light grey
4255
Anthracite grey
4256
!!
Highly resistant to ageing, UV and solvents. Stick down and smooth onto a dry, dust- and grease-free surface.
Dimension
BLACK
WHITE
YELLOW
10 cm x 10 m
6447
6445
6446
COVERSTRIPS
Quality
P.14
Invisifix
P.15
Coverstrips
P.16
Edges
P.18
Adaptation Profile
P.19
Miscellaneous profiles
P.20
13
COVERSTRIPS
QUALITY
Profile >> MATERIAL Alu silver Alu gold Alu bronze
>> OVERLAY High quality alloy like 6060-T5 – N755-2 heat-treated for higher hardness. Anodisation 15 microns. Colours are those defined by «R.A.L.» European norms. When not anodised, the profile is not polished.
Raw alu Stainless steel
Brass
Stainless steel manufactured by the best specialists. We use a type Z8C17 annealed «mirror finish» steel for all profiles except for self-adhesive corner profiles which are of type 304.
Made of 67 % of copper and 33 % of zinc.
Special exclusive veneer on aluminium profiles (like STARCLIC® and INVISIFIX® coverstrips). Same as laminate overlay 1 - Perfect match to your floor 2 - Very high resistance to abrasion and scratching 3 - High resistance to cleaning chemical products, to heat and to cold 4 - Does not get dirty; sunlight does not damage colours. «Overlay» protection: very high protection to abrasion Wood decorative melamine Aluminium profile
Bimetal Metallic base coated with a polished 30 microns brass sheet. High quality.
5 colours available.
>> ADHESIVES «VERITACK» Excellent adhesion on many types of support. Good resistance to temperature changes. High quality adhesive. Light amber appearance. Does not stain the floor or wall covering.
Rounded coverstrip Width: 30/35/40 mm
Alu oak
Alu beech
Alu cherry
>> DISPLAY PACKED PROFILES
Alu maple
Alu merbau
>> PACKAGING - PROTECTION SHEATHS All technical profiles are wrapped in a soft plastic protection sheath (stairnosings, corner profiles, edge profiles, expansion profiles...) until installation.
Compact heatshrink sheath. Coverstrips are supplied in cardboards.
European Width: 35 mm - ADHESIVE FILMS Protect all drilled coverstrips from scratching and oxidation.
Edge profiles
- CARTONS WITH PLASTIC SEPARATORS Compact. Profiles are spaced out by plastic separators. Good protection during transport.
Carpet edges
Stair-nosings
Heavy duty rubber mastic made of strong adhesion agents. Designed and used for many years. It has a strong adhesive power. Its main advantages being long term flexibility allowing expansion absorptions. Its elasticity withstands intensive wear and tear. This is the reason why we recommend this adhesive above technical profiles.
NE W
«BUTYL ROMUS» !!
>> DRILLING
Holes are drilled and countersunk. COVERSTRIPS End holes at 65 mm from end
Corner profiles
Expansion joints
14
Length 0.63 m 0.73 m 0.83 m 0.93 m 1.66 m 2.70 m 3.35 m
Holes 4 4 5 5 8 14 20
STAIR-NOSINGS End holes at 83 mm from end Length 2.60 m 3.00 m 4.00 m Plugs and screws: see p. 51
Holes 14 18 22
COVERSTRIPS
PROFILES WITH INVISIBLE FIXING
Invisifix® profiles INVISIBLE FIXING
ADVICE
1 - Before laying the flooring, trace a line on the floor and then drill 6 mm diam. holes (5 / metre).
Profile with invisible fixing by winged plugs: • Used to ensure simple and attractive fitting of various profiles • Ideal for transition to laminates as its flexibility of fitting always allows coverings to expand • In use the plug never marks the profile. Can be removed if necessary.
3 - With the flooring fitted adjust the position of the plugs in line with the holes and firmly push in.
IMPORTANT Where holes are not perfectly aligned, the off-centre body of the plug means that it can be rotated so that it is opposite the hole.
FT
SO ALSO IDEAL FOR FLOORS 0.93 m:
2 - Insert the corresponding plugs into the rail and slide them into place.
PLUGS TO BE ORDERED SEPARATELY!*
IN DISPLAY PREPACKED SHEATH with plugs
2.80 m: LOOSE IN PROTECTED SHEATH without plugs
94156
PLUGS Length 42 mm. Special polyamide.
ofiles. r 2.80 m long pr
* Fo
7 COLOURS AVAILABLE
20 plugs bag Drill ø: 6 mm. Approx. 5 plugs per meter.
Smooth finish
Fluted finish
Alu silver
Alu gold
Alu oak
Alu beech
INVISIFIX 30 mm
Alu maple
Alu merbau
LAMINATE PLATED ON ALUMINIUM
ANODISED ALUMINIUM
®
Alu cherry
INVISIFIX® 42 mm
INVISIFIX® 38 mm
42
38
30
INVISIFIX® 52 mm
52
5
5 4 - 11 mm
For junctions between similar levels. LENGTH
2.80 m 0.93 m Loose Sheath
10 - 20 mm
For junctions between levels which differ by up to 11 mm. LENGTH
2.80 m 0.93 m Loose Sheath
For junctions between similar levels. LENGTH
2.80 m 0.93 m Loose Sheath
For junctions between levels which differ by up to 20 mm. LENGTH
2.80 m 0.93 m Loose Sheath
Alu silver
1070 301070
Alu silver
1084 301084
Alu silver
1077 301077
Alu silver
1092 301092
Alu gold
1071 301071
Alu gold
1085 301085
Alu gold
1078 301078
Alu gold
1093 301093
Alu oak
1073 301073
Alu oak
1087 301087
Alu oak
1080 301080
Alu oak
1096 301096
Alu beech
1074 301074
Alu beech
1088 301088
Alu beech
1081 301081
Alu beech
1097 301097
Alu cherry
1075 301075
Alu cherry
1089 301089
Alu cherry
1082 301082
Alu cherry
1098 301098
Alu maple
1076 301076
Alu maple
1091 301091
Alu maple
1083 301083
Alu maple
1099 301099
Alu merbau
3721 303721
Alu merbau
3723 303723
Alu merbau
3722 303722
Alu merbau
3724 303724
* Available also as self-adhesive (see p. 16)
* Available also as self-adhesive (see p. 19)
* Available also as self-adhesive (see p. 16)
15
COVERSTRIPS
ROUNDED COVERSTRIPS
Self-adhesive rounded coverstrips
LOOSE 30 mm
IN DISPLAY PREPACKED SHEATH 30 mm
30 LENGTH TH. (mm) 0.63 m 0.73 m 0.83 m 0.93 m 1.66 m 2.70 m 3.35 m
Stainless steel Brushed stainless steel
TH. (mm)
2000 2001 2002 2003 2004 2008 2006
1
2060
1
ALU WOOD
ALU GOLD
ALU SILVER
BRASS
STAINLESS STEEL BRUSHED
0.63 m
0.73 m
30 LENGTH 0.83 m
0.93 m
1
301100 301101 301102 301103
Brass
1.2
301104 301105 301106 301107
Brass
1.2
2010 2011 2012 2013 2014 2018 2016
Alu silver
1.7
301110
Alu silver
1.7
2043
2048 2046
Alu gold
1.7
301114
Alu gold
1.7
2053
2058 2056
35 mm
40 mm
35
Brass
1
2021 2022 2023
2028 2026
1.5
2031 2032 2033
2038 2036
40 mm
35 TH.
TH. 0.63 m 0.73 m 0.83 m 0.93 m 1.66 m 2.70 m 3.35 m Stainless steel
0.63 m
0.73 m
2248 2246
Alu gold
2.4
2548 2546
5
Brass
2.4
301174 301175
HESIVE «VERITACK» AD THE DOES NOT STAIN G FLOOR COVERIN Light amber appearance. Good resistance to temperature changes. High quality adhesive. 42
30 5
5,6 LENGTH 2.80 m
5,6 LENGTH 0.93 m
LENGTH 2.80 m
LENGTH 0.93 m
Alu oak
2080
Alu oak
2203
Alu oak
302080
Alu oak
302203
Alu beech
2081
Alu beech
2204
Alu beech
302081
Alu beech
302204
Alu cherry
2082
Alu cherry
2205
Alu cherry
302082
Alu cherry
302205
Alu maple
2083
Alu maple
2206
Alu maple
302083
Alu maple
302206
Alu merbau
2084
Alu merbau
2207
Alu merbau
302084
Alu merbau
302207
European EUROPEAN
Supplied in display prepacked sheath
Supplied loose LENGTH 2.70 m 3.35 m 35 Drilled - countersunk
35 HEAVY DUTY
LENGTH 0.93 m
Alu silver
1568
1566
Alu silver
301064
Alu gold
1578
1576
Alu gold
301068
Alu silver
2568
2566
Alu silver
301146
Alu gold
2578
2576
Alu gold
301150
Heavy traffic.
16
1.66 m
2.4
42
30
0.93 m
301172 301173
TH. 0.63 m 0.73 m 0.83 m 0.93 m 1.66 m 2.70 m 3.35 m 2.4
0.83 m
Stainless steel
40
Alu silver
1.66 m
Stainless steel
«Veritack» adhesive
COVERSTRIPS
ROUNDED COVERSTRIPS
Drilled rounded coverstrips
STAINLESS STEEL
BRASS
LOOSE 30 mm
30 LENGTH TH. (mm) 0.63 m 0.73 m 0.83 m 0.93 m 1.66 m 2.70 m 3.35 m
Stainless 1 steel Stainless 1.2 steel Brushed stainless steel 1
ALU SILVER
ALU GOLD
1000 1001 1002 1003 1004 1008 1006
1181 1182 1183 1184 1188 1186 1060
IN DISPLAY PREPACKED SHEATH 30 mm Stainless steel Stainless steel
TH. (mm) 0.63 m 1
Brass
1.2
1.2
1010 1011 1012 1013 1014 1018 1016
Alu silver
1.7
Alu silver
1.7
1043
1048 1046
Alu gold
1.7
1.7
1053
1058 1056
35 mm Stainless steel
50 mm 35 LENGTH TH. (mm) 0.63 m 0.73 m 0.83 m 0.93 m 1.66 m 2.70 m 3.35 m
Brass
40 mm Brushed stainless steel
1
1021 1022 1023
1028 1026
1.5
1031 1032 1033
1038 1036
Brass
1
1248 1246
Alu gold
2.4
1548 1546
301005 301006 301007 301008 301009
50 TH. (mm) 0.63 m
LENGTH 0.73 m 0.83 m 0.93 m
301010 301011
1.8
301012 301013
50 LENGTH TH. (mm) 0.63 m 0.73 m 0.83 m 0.93 m 1.66 m 2.70 m 3.35 m
Stainless 1.2 steel Brushed 1.2 stainless steel
1218 1216 1064
1.8
1228 1226
Drilled - coun- 1.8 tersunk brass
1238 1236
Brass
Number of holes HOLES LENGTH 0.63 m 4 0.73 m 4 0.83 m 5 0.93 m 5 1.66 m 8 2.70 m 14 3.35 m 20
All our drilled coverstrips are protected by an adhesive film. Drilling: for Ø 3.5 mm raised countersunk head screw.
Accessories 93405
1.66 m
1.2
Holes Ø 5 mm. through Allows drilling . the coverstrip
1063
2.4
1.66 m
301000 301001 301002 301003 301004
Drilled - coun- 1.8 tersunk brass
40 LENGTH TH. (mm) 0.63 m 0.73 m 0.83 m 0.93 m 1.66 m 2.70 m 3.35 m
Alu silver
50 mm
Stainless steel
30
LENGTH 0.73 m 0.83 m 0.93 m
1.2
Brass
Alu gold
SUPPLIED WITH S SCREWS AND PLUG
93400
AVIATION SNIPS
COVERSTRIP SHEARS
Special notched blade. For cutting 10/10e stainless steel, 12/10e brass and 17/10e aluminium coverstrips.
Vanadium chromium plated steel. For cutting the following widths: 17/10e aluminium, 15/10e steel sheet metal, 18/10e brass, 10/10e stainless steel.
TO BE ORDERED SEPARATELY!
Screw
Plugs Drills See page 51
17
COVERSTRIPS
EDGES
Bendable profiles MANUALLY BENDABLE
For a decorative effect with soft or resin floor coverings. Can easily be bent by hand. Can be screwed, nailed down or inset. Minimum Radius 270 mm.
BENDABLE STRAIGHT
ing * or with bend page 26). machine (see
Minimum Radius 270 mm LENGTH: 2.70 m H = 3 mm H = 6 mm H = 8 mm H = 10 mm H 23
BENDABLE BEVELLED
Raw alu
3520
3522
3524
3526
Brass
3530
3532
3534
3536
Drilled
3,5
H 18
Minimum Radius 200 mm LENGTH 2.50 mm H = 2.5 mm H = 5 mm Alu silver
3540
3542 PVC Fix profile, see page 24
LINO EDGE
Miscellaneous profiles
For lino & PVC finishing (maximum thickness: 3.5 mm).
LENGTH: 2.70 m
30 3,5 Drilled - countersunk
Alu silver
1908
Alu gold
1918 LENGTH: 2.70 m
30 3,5
ADHESIVE CARPET EDGE
Alu silver
2908
Alu or
2918
MATERIAL
LENGTH: 2.70 m
«Butyl» adhesive
Once the carpet edge and the floor covering are correctly installed, just squeeze the upper jaw of the profile with a wood wedge and a mallet.
13,5
25
Alu silver
2068
Alu gold
2078
«Butyl» adhesive
FLAT EDGE
For edging PVC, linoleum or rubber floorings.
LENGTH: 4m
40 3
Raw alu
1930
Drilled
3 MM REDUCER
NE W
For edging PVC or linoleum floors without joints making it easier to move trolleys or chairs with casters.
!! LENGTH: 2.70 m 38
Drilled
18
3
Alu silver
1931
Aluminium stainless steel
1932
COVERSTRIPS Self-adhesive reducers
ADAPTATION PROFILES
Reducer profiles Supplied in display prepacked sheath
Supplied loose
For sizeable differences of level. Especially suitable for wooden and ceramic floors. «VÉRITACK» adhesive.
LENGTH: 3.00 m Height made up for
LENGTH 0.73 m 0.83 m 0.93 m 1.66 m
Stainless 2610 steel 4 / 9 mm Brass 2611 coated
301176 301177 301178 301179
30
Stainless steel Brass coated
6 / 12 mm
2614
301220 301221 301222 301223
40
2615
301230 301231 301232 301233
8 / 14 mm
2612
301184 301185 301186 301187
50
Stainless steel Brass coated
2613
301188 301189 301190 301191
Width mm
30
40
50
301180 301181 301182 301183
Drilled reducers To compensate sizeable differences of level. Staggered holes. Thickness 1.5 mm. Length 2.50 m
Width Brushed stainless steel
70 mm
Drilled
2085
Length 2.50 m
Width Drilled
2086
85 mm stainless steel
Reducer profile
Ramp for finishing a parquet, laminate or ceramic floor. Thickness 1.5 mm.
Length 2.50 m Brushed stainless steel
Drilled
LAY LAMINATE OVER LENGTH
38 4 - 11 mm «Veritack» adhesive
2.80 m Loose
Press to adjust the profile.
0.93 m Sheath
Alu oak
2112 302112
Alu beech
2113 302113
Alu cherry
2114 302114
2110 302110
Alu maple
2115 302115
Alu gold
2111 302111
Alu merbau
2116 302116
LENGTH
7
8,5 24
2.80 m Loose
Alu silver
28
«Z» PROFILE
0.93 m Sheath
LENGTH
14
BULK 2.70 m
BLISTER 0.90 m
Alu silver
2288
2286
Alu gold
2289
2287
NE W
REDUCER PROFILE
Available also in «INVISIFIX®» Invisible fixing with plugs. (See page 15)
1928
!!
0.90 m
Drilled
Adjustable heights 0 mm - 10 mm
0 mm - 5 mm
12 mm - 2 mm
19
COVERSTRIPS NE W
SHOWER PROFILE
MISCELLANEOUS PROFILES !! 75 mm
9,5 3 105 mm To stick
To ensure a water tight seal between the bedroom and shower PVC flooring, in retirement homes and elsewhere. Hot welding recommended.
PVC
LENGTH: 3.30 m
Grey
2490
SWISS PROFILE
12
For draught proofing and waterproofing at main entrance.
15
60
Drilled
6108
Supplied :
Rubber joint
LENGTH
Length: 4.00 m.
Alu silver
loose in display prewithout packed sheath joint with joint 4,00 m 0,93 m
6114
306118
DRAUGHT-PROOFING PROFILE
16
18
NE W
8
Aluminium channel (to be screwed on the door) with rubber seal insert. Draughtproof doors up to 45 mm thick underneath.
!!
28
Length: 2.50 m RAW ALU + RUBBER
Drilled
NE W
CABLE DUCT
6122
!!
a
16 / 32
b
c
75 / 135
To stick
75 mm
75 mm x 16 mm Cable max ø COLOUR LENGTH: 2.50 m 4245 (a) - 2 x 8 mm BLACK/GREY (b) - 1 x 10 mm
125 mm x 32 mm Cable max ø (a) - 2 x 20 mm (b) - 1 x 22 mm
135 mm
20
TAKES HEAVY TRAFFIC
Cable duct consists of two parts: - the channel for the wiring. - a cover which clips onto the channel. Made from tough elastomer. Lay or glue. M2 Fire classification rating.
COLOUR GREY/ YELLOW
LENGTH: 2.50 m
4246
FINISHING PROFILES
Laminate and Parquet Profiles
P.22
Stairnosings
P.29
Nonslip stairnosings
P.32
Stair rods – Stretched carpet
P.39
Wall Protection
P.40
Expansion profiles
P.46
Ceramic profiles
P.50
Accessories
P.51
21
NE W
FINISHING PROFILES !!
PARQUET AND LAMINATE PROFILES
«PPS - Magic» profiles Highly ingenious system of strips. Supplied in individual display prepacked sheath containing: • 1 drilled aluminium base to be fixed to the floor • drilled flag type coverstrip, to be screwed on base profile drilled cover to be screwed to the base, with tilting flap mechanism covering an invisible duct for electrical wiring. • screws and plugs
S - HIDDEN SCREW FILE O PR T C U - CABLE D
Position the base, allowing 10 mm for expansion
Screw on the cover, insert cables as needed
Close the flap
REDUCER PROFILE MAGIC
70
Th. 7 to 16 mm 0.90 m 2.70 m Alu silver
1341
1342
Alu gold
1343
1344
TRANSITION PROFILE MAGIC 55
TH. 7 to 16 mm 0.90 m 2.70 m Alu silver
1351
1352
Alu gold
1353
1354
«PPS - Champion Flex» profiles ADJUSTABLE HEIGHT AND INCLINE
REDUCER PROFILE FLEX
Each profile is supplied in an individual sheath containing: - a pre-drilled aluminium base for fixing to floor, into which a pivoting aluminium channel is fitted. - a pre-drilled threshold cover, to be screwed onto the aluminium channel. Cover can then be tilted to accommodate the change of level. - screws and plugs.
ONLY ONE PROFILE FOR 7 to 23 mm THICKNESS : 7 to 23 mm 0.90 m 2.70 m
Alu silver
3280
3285
Alu gold
3281
3286
TRANSITION PROFILE FLEX THICKNESS: 7 to 23 mm 0.90 m 2.70 m
22
Alu silver
3290
3295
Alu gold
3291
3296
When upright: min 7 mm, max 17 mm. When sloping: min 3 mm on one side and 13 mm on the other Max 11 mm on one side and 22 mm on the other.
PARQUET AND LAMINATE PROFILES
RACTI
CA
P
«PPS» profiles L
supplied in an Each profile is th containing: individual shea to be screwed • a drilled base to the floor, shold cover • a drilled thre into the base, ed w to be scre plugs. • screws and
Screw the base in the subfloor.
Fit the parquet or laminate (keep the expansion joint).
NE W
3 COLOURS AVAILABLE Alu silver
Alu gold
Screw the profile to the base. Adjust the height difference by hitting slightly the upper profile. Tighten the screw.
!!
Remove the protection film in case you use a wood effect foil.
S FOR WIDE NEW THICKNES m MODEL: 7 to 18 m
Alu bronze
REDUCER PROFILE «PPS» 44 Standard
Standard THICKNESS : 7 to 16 mm 0.90 m 2.70 m
7 - 16 Wide
Suitable for 7 - 18 junctions between parquet/wooden floors and thinner floor coverings (carpet, PVC, linoleum...).
Wide THICKNESS : 7 to 18 mm 0.90 m 2.70 m
1250
1264
Alu silver
1251
1267
1260
1265
Alu gold
1252
1268
1262
Alu bronze
55,5
1272
TRANSITION PROFILE «PPS» 33,7 Standard THICKNESS: 7 to 16 mm 0.90 m 2.70 m
Standard
7 - 16 44 Suitable for junctions between parquet/wooden floor and floor coverings of similar thickness (maximum height difference: 3 mm).
7 - 18
Wide THICKNESS: 7 to 18 mm 0.90 m 2.70 m
1256
1274
Alu silver
1257
1277
1270
1275
Alu gold
1258
1278
1281
Alu bronze
Wide
1282
EDGE PROFILE «PPS» 21,7
Standard THICKNESS: 7 to 16 mm 0.90 m 2.70 m
7 - 16 Standard
33 For neat edging of parquet / wooden floors close to walls, skirting or French windows, or framing a mat/carpet.
Wide THICKNESS: 7 to 18 mm 0.90 m 2.70 m
1294
1284
Alu silver
1297
1287
1280
1285
Alu gold
1298
1288
1295
Alu bronze
7 - 18
1296
Wide
«PPS» Accessories 6599
LEVER
!
C
Kit of 6 height-spacers
7-18, For both PPS pion and PPS Cham Flex.
6 mm long plastic height spacer to be screwed on the profile base (screws supplied) to make the cover that is screwed onto it up to 5 mm higher. (6 height spacers per meter).
Spare screws Blister pack containing: - 6 screws 7 to 12 mm - 6 screws 12 to 15 mm - plugs and screws for base PPS 6-10 / 7-15 and Champion Flex.
6597
alu silver
6598
alu gold
23
FINISHING PROFILES
PARQUET AND LAMINATE PROFILES
Fix Wood range 5 colours available
14 500 tr / Taber FILM PROTECTION
RESIDENTIAL USE
MELAMINE VENEER
OAK
MOISTUREPROOF MDF SUPPORT
REDUCER
7 -11 mm
3600
3610
Maple
Beech
3601
3611
Merbau
Cherry
3602
3612
LENGTH 0.90 m 2.70 m
7 -11 mm
3603
3613 3614
LENGTH 0.90 m 2.70 m
Oak
3620
3630
Maple
Beech
3621
3631
Merbau
Cherry
3622
3632
3623
3633 3634
Thickness 7 to 11 mm LENGTH 0.90 m 2.70 m
LENGTH 0.90 m 2.70 m 32
7 -11 mm
STAIR-NOSING
Oak
Thickness 7 to 11 mm
44
EDGE
MERBAU
LENGTH 0.90 m 2.70 m
LENGTH 0.90 m 2.70 m 44
TRANSITION
CHERRY
BEECH
Each profile is supplied in an individual sheath containing: • a drilled PVC rail to be screwed to the floor, • a cover to be clipped on the rail, MAPLE • screws and plugs.
Oak
3640
3650
Maple
Beech
3641
3651
Merbau
Cherry
3642
3652
3643
3654
Thickness 7 to 11 mm LENGTH 2.70 m
65
7-11 mm
18
LENGTH 2.70 m
Oak
3660
Maple
3663
Beech
3661
Merbau
3664
Cherry
3662
Thickness 7 to 11 mm
RESIDENTIAL USE
PVC FIX Bendable Profile FOR FLOOR
HOW IT WORKS
Don’t use a heat gun to soften.
38
FOR WALL
To be used as reducer 0-12 mm or transition profile 4-10 mm (min. bending diam. 60 cm)
Easily bendable. Put the PVC cover profile in warm water for approx. 15 min.
COVER PROFILE LENGTH 3.00 m Alu silver
3730
Maple
3738
Alu gold
3731
Merbau
3739
Oak
3732
Black
3735
Beech
3733
Grey
3736
Cherry
3734
White
3737
Priorly, cut the PVC rail to measure and screw it down. Then, force the warm flexible cover profile in the base.
24
Can be installed e.g. around a column. Min Ø 30 cm.
LENGTH 3.00 m
r Rail and cove d re de or be to separately.
RAIL USE
LENGTH 2.70 m
for floors
3725
for skirtings
3726
FINISHING PROFILES
PARQUET AND LAMINATE PROFILES
Starclic profiles 1 Easy click
«Starclic®» profile is made of 2 parts: a drilled raw aluminium base to be screwed or glued to the floor and a cover to be clipped to the base.
7 COLOURS AVAILABLE
2 Rotation adjustment
3 Floor expansion
OVERLAY Special exclusive overlay on aluminium profiles (like STARCLIC® and INVISIFIX® coverstrips). Same as laminate overlay 1 - Perfect match to your floor 2 - Very high resistance to abrasion and scratching 3 - High resistance to cleaning chemical products, to heat and to cold 4 - Does not get dirty; sunlight does not damage colours. «Overlay» protection: very high protection to abrasion Wood decorative melamine Aluminium profile
Anodised aluminium
Alu silver
Laminate plated on aluminium
Alu gold
Alu oak
0.93 m:
Alu cherry
Alu beech
Alu maple
Alu merbau
IN DISPLAY PREPACKED SHEATH with screws and plugs
2.80 m: LOOSE IN PROTECTION SHEATH without screws and plugs
STANDARD COVER ADJUSTABLE FROM 7 TO 12 mm TRANSITION PROFILE STANDARD COVER 0.93 m 2.80 m
REDUCER PROFILE STANDARD COVER 0.93 m 2.80 m
Alu silver
3100
3107
Alu gold
3101
3108
Alu oak
3102
3109
Alu beech
3103
3110
Alu cherry
3104
3111
Alu maple
3105
3112 7 - 12
Alu merbau
3106
3113
Transition 7-12 mm
Reducer 7-12 mm 37
41
7 - 12 Drilled
Drilled
Alu silver
3150
3157
Alu gold
3151
3158
Alu oak
3152
3159
Alu beech
3153
3160
Alu cherry
3154
3161
Alu maple
3155
3162
Alu merbau
3156
3163
WIDE COVER ADJUSTABLE FROM 9 TO 17 mm TRANSITION PROFILE LARGE COVER 0.93 m 2.80 m Alu silver
3128
3135
Alu gold
3129
3136
Alu oak
3130
3137
Alu beech
3131
3138
Alu cherry
3132
3139
Alu maple
3133
3140
Alu merbau
3134
3141
REDUCER PROFILE LARGE COVER 0.93 m 2.80 m
Transition 9-17 mm
Reducer 9-17 mm 46
52
9 -17
9 -17 Drilled
Drilled
Alu silver
3178
3185
Alu gold
3179
3186
Alu oak
3180
3187
Alu beech
3181
3188
Alu cherry
3182
3189
Alu maple
3183
3190
Alu merbau
3184
3191
25
FINISHING PROFILES
PARQUET AND LAMINATE PROFILES
Edges BENDABLE «U» PROFILE
BENDABLE REDUCER PROFILE 93778
BENDING MACHINE
LENGTH: 2.70 m HEIGHT «H» 9 mm 11 mm 15 mm Radius mini 400 mm 490 mm 650 mm
15 H Drilled
Alu silver
3550
3551
3552
Alu gold
3555
3556
3557
7
Radius may vary and is given for information only, without any commitment.
Radius mini H
LENGTH: 2.70 m HEIGHT «H» 8 mm 10 mm 680 mm
3560
Alu silver
Drilled
PARQUET EDGE
8 mm REDUCER
Attractive finishing of parquet and laminate edges along walls, picture windows and tiling.
Especially suited for access with trolleys (supermarkets) or for delimiting different areas in shops.
Raw alu LENGTH 3.00 m
LENGTH: 2.80 m 2,70 m THICKNESS (A) 7.5 mm 8.5 mm 10.5 mm 15 mm
A Alu silver To stick
Alu gold
1960 1961
1970 1971
1980 1981
8
1990 62
1991
10
Drilled
2650
Undrilled
2651
REDUCER PROFILES
15 MM REDUCER
For parquets (14 mm) and laminate (8 mm).
Ease of access for pallet trucks, trolleys and wheelchairs. Extremely robust
8 mm Drilled
Drilled
LENGTH: 2.70 m
39
Adhesive Veritack
Adhesive Veritack
Alu silver
1920
1921 Alu gold
8
NE W
8
LENGTH: 2.70 m Alu silver
2920
2921 Alu gold
39
!!
80 8.5 to 15
Drilled
14 mm Drilled 14 Drilled
45
14 Adhesive Veritack
45
26
3561
LENGTH: 2.70 m
Adhesive Veritack LENGTH: LENGTH: 2.70 m 2.70 m
Alu silver
1925
Alu gold
1926
Alu silver
2925
Alu gold
2926 Fitted flat, for floors from 8.5 to 13 mm (withstands heavy loads)
Slightly raised for floors from 10.5 to 15 mm (for lighter loads)
Alu silver
2624
Alu gold
2622
Alu bronze
2623
Alu silver (10.5 to 15 mm)
2621
FINISHING PROFILES
PARQUET AND LAMINATE PROFILES
SKIRTING COVER
MDF skirting with hard wearing overlay cover providing a finish without having to remove existing skirtings. Overall height 13 cm
NE W
Skirting profile
No need to remove old skirtings
!!
Precut to required height
120 mm
Max.
20 mm 20 mm 20 mm
Create a cable duct.
15 mm
Over skirtings On wooden skirtings ceramic flooring
Mini
60 mm
Colour Length 2.20 m White to be pain2550 ted on application Raw oak veneer
2551
8 mm
to stick
CLIP-ON SKIRTING
Integrated cable duct
MDF skirtings to be glued on or clipped on, easy to remove allowing for cleaning or wiring. Hard wearing paper cover.
NE W
Supplied without holding clips, to be ordered separately.
!!
H. 120 mm Colour Length 2.40 m White to be pain2540 ted on application
Screw 1 clip about every 50 cm.
2545
H. 75 mm
H: 120 mm with cable duct
Pack of 30 clips
Colour Length 2.40 m White to be pain2560 ted on application
The clips are made out of PVC. Supplied drilled with screws and plugs.
Provides a frame covering expansion gap in a room, along windows or old wooden skirtings.
VERY ATTRACTIVE
!!
20
15
SKIRTING 20 x 15
NE W
Skirting
2
Due to its shape this profile allows furniture to be replaced against walls (impossible with quarter circles)
Adhesive
LENGTH: 2.70 m
LENGTH: 2.70 m Alu silver
2438
Alu oak
2449
Alu gold
2439
White laquered
2448
For other colours, please contact us
27
FINISHING PROFILES
PARQUET AND LAMINATE PROFILES
Door stoppers - Pipe collars PIPE COLLARS FOR RADIATORS
DOOR STOPPERS for laminate
For a nice finish around pipes. Solid wood diameter 50 mm. Thickness: 20 mm.
Patented system allowing the door stopper to be fixed in the laminate, not in the concrete. Allows wood or laminate expansion. Ideal for heated floors.
3700
22 mm
3710
18 mm
3701
22 mm
3711
18 mm
3702
22 mm
3712
18 mm
3703
Beech
Cherry
Maple
REF. St. steel 6380 Alu silver Alu gold
39 x 42 mm
20 7-11 mm
24,5
22 mm
Dim. Ø x H
WOOD
18 mm Oak
METAL
int. Ø
3713
52,5
1- Drill Ø 8 mm and install the plug
2,2
34 x 35 mm
6381 6382
Oak
6390
Beech
6391
Cherry 6392
2- Screw the door stopper
Maple
6393
Stair-nosings «PPS» PARQUET
Drilled nonslip fluted profiles. Possibility of height adjustment for parquet. Each profile is supplied in an individual plastic sheath with screws and plugs.
22
20 11-16 mm
7-11 mm
29,2
24,5 2,2
52,5
52,5
2,2
THICKNESS: 7 to 11 mm L.: 2.70 m
THICKNESS: 11 to 16 mm L.: 2.70 m Alu silver
1490
Alu silver
1480
Alu gold
1492
Alu gold
1482
22
STAIR-NOSINGS for laminate
11-16 mm
Supplied in prepacked sheath, without screws and plugs. 29,2
A
2,2
52,5
LENGTH: 2.60 m THICKNESS (A) 7.5 mm 8.5 mm 10.5 mm
A 27
Alu silver
1471
1472
1473
Alu gold
1475
1476
1477
Drilled
CORNER PROFILE For marking out edges of flooring, fitted carpet or laminate fitted to treads of steps PVC Colour range
to stick
28
Lenght 2.75 m
Oak
2791
Beech
2792
Cherry
2793
Maple
2794
FINISHING PROFILES
STAIR-NOSINGS
«Decoration» range DOUBLE EDGE 38 2,5
LENGTH 2.60 m 4.00 m
16 Alu silver
Drilled
1610
1611
For PVC and linoleum. Maximum thickness: 2.5 mm. 48
FOR PVC
2,5
LENGTH 2.60 m
28
Drilled
Alu silver
1620
Alu gold
1622
For PVC and linoleum. Maximum thickness: 2.5 mm.
LINO
LENGTH 2.60 m 4.00 m
25 3,5 12
Alu silver
1630
1631
Alu gold
1632
1633
Drilled
For smooth and clean finishing of PVC and linoleum floorings.
45 x 22
45 4 22 Drilled
LENGTH 2.60 m 4.00 m Alu silver
1386
1388
Alu gold
1396
1398
For 4 mm thickness floor coverings.
45 x 32
45 7,35 LENGTH 2.60 m 4.00 m
32 Alu silver
1416
1418
Alu gold
1426
1428
Drilled
For 8 mm thickness floor coverings.
37
STAIR EDGE 8
LENGTH 3.00 m
24 15 To screw or stick.
Beige-grey powder coated alu
1690
For masking tread edges on the open side of a stairway. To be screwed or stuck.
29
FINISHING PROFILES
STAIR-NOSINGS
«Fluted top» range MAXI FLUTED
60
MAXI SKIRT
44
LENGTH 2.60 m 4.00 m Alu silver Maxi-skirt.
MEGA FLUTED 77
1555
1556
Drilled 70
NE W
3
!!
55 LENGTH: 2.50 m Alu silver
LARGE FLUTED TOP
1560
Drilled 100
36 LENGTH 2.60 m 4.00 m Alu silver
Drilled
1540
1541
LARGE FLUTED ROUNDED 80
34 R 17,8
LENGTH 2.60 m 4.00 m Alu silver
1550
1551
Drilled
HEAVY DUTY ANTI-SLIP STAINLESS STEEL 50
INDOORS / OUTDOORS
Fitting to bare steps. Stainless steel profile with angular stainless steel particles attached which make stair-nosings highly nonslip (both indoors and outdoors) even in areas with heavy traffic. Drilled every 50 cm
30
LENGTH: 2.00 m Drilled
30
St. steel 304 L
1770
FINISHING PROFILES
STAIR-NOSINGS
«Fluted top» range CORNER ANGLE To be fixed on thin coverings or alongside platforms such as stands and podiums.
FOR STANDS AND PODIUMS
NE W
25 10
!!
25
Alu silver
1316
1314
Alu gold
1317
1315
Drilled
20
LENGTH 2.60 m 4.00 m
25 x 20 Drilled
40 40 25
Alu silver
1510
1511
Alu gold
1512
1513
Alu bronze 2.50 m
1519 LENGTH 2.60 m 4.00 m
40 x 25 25
MINI FLUTED
LENGTH: 2.50 m adhesive Drilled
25 x 10
Alu silver / gold Alu bronze
Alu silver
1505
1506
Alu gold
1507
1508
Alu bronze 2.50 m
1509
41
LENGTH 2.60 m 4.00 m Alu silver
17
In display prepacked sheath
Drilled
RENOVATION
1514
1515
LENGTH 1.00 m Alu silver
1517
To embellish and protect the floor covering. 43
20
LENGTH 2.60 m 4.00 m Alu silver
1530
1531
Alu gold
1532
1533
Brass
1536
1538
Drilled
FLUTED WIDE SKIRT Special long skirt.
48
34
SPECIAL LONG SKIRT
LENGTH 2.60 m 4.00 m Alu silver
1500
1501
Drilled
ROUNDED Fitting to bare steps in conjunction with a min. 3 mm thick floor covering. LENGTH 2.60 m 4.00 m
39
14
Alu silver
1520
1521
Alu gold
1522
1523
Brass
1526
1528
Drilled
31
FINISHING PROFILES
NONSLIP STAIR-NOSINGS
«Tecniromus» range For all public places or areas of heavy traffic (offices, schools, hospitals, underground, stores etc.).
«TEC 1» TYPE
72
Nonslip insert
26
«TEC 2» TYPE
COLOUR
2.77 m
Black
1700
56 2,5
Nonslip insert 32
• Mill aluminium base profile. • Moulded-in nonslip texture PVC inserts, pressure adhesion assembled in our factory. • Drilled and countersunk profiles. Drilling: every 26 cm with matching capping plugs (supplied) to hide screw heads. • Fixing with raised head countersunk screws 3.5 x 25 mm.
«TEC 4» TYPE
COLOUR
2.77 m
Black
1710
60 5
Nonslip insert 32
Other insert colours available within short manufacturing lead time on request with a minimum quantity of 30 lengths.
47 Yellow
48 Blue
43 Grey
20 Brown
COLOUR
2.77 m
Black
1730
30 Red
01 White
«Polyrom» paint-on coating KIT POLYROM 0.5 L
Liquid polyurethane coating of very high adhesion which contains particles of rubber easy to apply by roller to concrete, wood or persute surfaces. Slip-resistant, highly resistant to abrasion. Dry in 12 hrs. Supplied with 1/2 litre can, 2 rollers, 1 50 mm honeycomb (special) frame, 1 stirrer, 1 can opener.
Application techniques POLYROM
6950
Indoors Direct
Black Polyrom
Apply 2 coats - for 18 m x 40 mm.
6951
Stairs
ANTI-SLIP
Transparent Polyrom
Primer for outdoor wood
NE W
Single coat - for 32 m x 40 mm.
6956
Ramps
!!
Before application on outdoor wood (gateways) 250 ml
Emergency exits
6955
Standard primer
For all supports. Before application on tiling, metal, marble, stainless steel, aluminium, glass... 250 ml
32
Concrete Soft Raw wood Ceramic Painted floors except waxed Reconstituted wood Tiles Steel surfaces except wood Aluminium linoleum
Gateways
Direct
Std primer
Direct
Direct
Out Direct: Black Direct: Black Primer Wood: Primer Wood: -doors Transparent Transparent
Std primer
Direct
Direct
Indoors Direct
Std primer
Direct
Direct
Out Direct: Black Direct: Black Primer Wood: Primer Wood: -doors Transparent Transparent
Direct
Std primer
Direct
Direct
Indoors Direct
Std primer
Direct
Direct
Out Direct: Black Direct: Black Primer Wood: Primer Wood: -doors Transparent Transparent
Direct
Std primer
Direct
Direct
Indoors Direct
Std primer
Direct
Direct
Std primer
Direct
Direct
Direct
Out Direct: Black Direct: Black Primer Wood: Primer Wood: -doors Transparent Transparent
FINISHING PROFILES
NONSLIP STAIR-NOSINGS
«G.T.» range RDERED INSERT TO BE O SEPARATELY
Thickness: 2 mm
Polyurethane insert Specified for heavy traffic Antislip
A
1st hole at 30 mm
DV
G.T.
ICE
inserts, After sticking with a steel em smooth th r. or rubber rolle . 9) 10 ge (See pa
G.T. Bevelled edge
To be used with 1 insert 48 mm x 2 mm.
68
48 67,50 33 48
Drilled
LENGTH 2.60 m 4.00 m
45 Raw alu
1300
1301
LENGTH: 4 m
Nonslip inserts 48 mm / G.T.
48 mm x 2 mm polyurethane adhesive strips on rot-proof non-woven polyester. Standard EN14041 (LNE) BF1 S1 Black
LENGTH
Brown
Red
Drilled
G.T. Straight edge
6460
6461
6462
6463
4.00 m
6470
6471
6472
6473
1308
63
Green
2.60 m
Raw alu
2,5
48 LENGTH 2.60 m 4.00 m
33 Raw alu
G.T. WIDE
1302
1303
Drilled
Two 40mm x 2mm inserts to be stuck on the profile.
G.T. Wide bevelled edge 101
40
40
33
LENGTH 2.60 m 4.00 m Raw alu
1304
1305
Drilled
G.T. Wide straight edge 96
Nonslip inserts 40 mm / G.T. Wide
40 mm x 2mm polyurethane adhesive strips on rot-proof non-woven polyester. Standard EN14041 (LNE) BF1 S1 Black
Brown
Red
Green
5.20 m
6480
6481
6482
6483
8.00 m
6490
6491
6492
6493
LENGTH
2,5
40
40 LENGTH 2.60 m 4.00 m
33 Raw alu
1306
1307
Drilled
33
FINISHING PROFILES
NONSLIP STAIR-NOSINGS
«Carborundum insert» range DOUBLE CARBORUNDUM INSERT - 19 mm 75
Adhesive carborundum insert, supplied non stuck. 33
LENGTH 2.60 m 4.00 m
Supplied with black 19 mm insert
Alu silver
1355
1358
Drilled
To be fixed on thin coverings or alongside platforms such as stands and podiums.
66
DOUBLE CARBORUNDUM INSERT - 12 mm
Adhesive carborundum insert, supplied non stuck. Supplied with black 12 mm insert
36
LENGTH 3.00 m Alu silver
1360
Drilled
BEVELLED EDGE - 50 mm
68
Adhesive carborundum insert, supplied non stuck. Supplied with black 50 mm insert
43
Without insert
Extra wide skirt. Wide carborundum insert for better security.
LENGTH 2.60 m 4.00 m Alu silver
1345
Alu silver
1347
1346
Drilled e.g. with photoluminescent insert.
ROUNDED ANTI-SLIP - 50 mm Adhesive carborundum insert, supplied non stuck.
INSERT ON ROUNDED EDGE
NONSLIP CARBORUNDUM INSERT Self-adhesive. Upper face is made of silicium carbide. Thickness: 1 mm.
Supplied with black 50 mm insert Anti-slip insert covering the angle for better security.
Alu Silver
1380
Drilled
INSERT CARBORUNDUM TO BE ORDERED SEPARATELY! Width
Length
19 mm 25 mm
18.30 m
12 mm
Black
Brown
6971
6975
6972 6973
50 mm
34
LENGTH 3m
50 m
97130
Yellow Transparent Photoluminescent
6979 6980 6982
FINISHING PROFILES
«Carborundum insert» range Fitting to bare steps. Can be used also as coverstrip. 19 mm x 1 mm inserts are to be ordered separately.
A
FLAT - 19 mm
NONSLIP STAIR-NOSINGS DV
ICE rs: - on metal stai ings better. os r-n ai drilled st tyl: osings with bu r-n - adhesive stai . er im pr y pl ap and dry clean, dust (see page 41) LENGTH 2.60 m 4.00 m
3 30
MINI BEVELLED EDGE - 19 MM
Alu silver
Drilled - countersunk
40
18
1955
1958
Adhesive carborundum insert, supplied non stuck.
«Butyl» adhesive
Supplied with black 19 mm insert
LENGTH 4.00 m Alu silver
2371
53
BEVELLED EDGE - 19 mm To be installed on different kinds of supports such as: painted stairs, ceramic tiles, PVC floorings or stuck wooden-floors. Carborundum insert - thickness 1 mm, width 19 mm.
LENGTH 2.60 m 4.00 m
PACKAGING 33
WITHOUT ANTI-SLIP INSERT
Drilled - countersunk
Alu silver
1365
1368
Alu gold
1363
1366
WITH BLACK INSERT Alu silver 1365-2 1368-2 (not fitted) 53 LENGTH 2.60 m 4.00 m
PACKAGING
33
STRAIGHT EDGE - 19 mm
WITHOUT ANTI-SLIP INSERT «Butyl» adhesive
Alu silver
2345
Alu gold
2343
WITH BLACK INSERT Alu silver 2345-2 2348-2 (fitted)
50
To be installed directly on stairs for butting up to a thin floor covering such as, thin carpet, PVC, floorings with a thickness under 4 mm. Carborundum insert thickness 1 mm, width 19 mm.
4
33
PACKAGING Drilled - countersunk
LENGTH 2.60 m 4.00 m
WITH BLACK INSERT Alu silver 1375-2 1378-2 (not fitted)
50 4
PACKAGING
33 «Butyl» adhesive
Locking knurl
LENGTH 2.60 m 4.00 m
WITH BLACK INSERT Alu silver 2355-2 2358-2 (fitted)
93242
TEMPLATE FOR STAIR-NOSINGS Extendable. Ideal for making and reporting templates of stairs on stair-nosings to be cut to measure. Min 720 mm. Max 1300 mm. Max with extension 1750 mm.
Swivelling
35
FINISHING PROFILES
NONSLIP STAIR-NOSINGS
«Double fluted PVC insert» range CL
ER EV !
easily inserts are FLUTED PVC air-nosing st the fitted into r back groove on thei thanks to the folding. allowing easy
To be laid on stairs covered with floor covering (carpets, PVC, glued down parquet, ceramic floors) or on painted stairs.
STRAIGHT DOUBLE FLUTED INSERT
66
Supplied with black 15 mm insert
40
LENGTH: 3.00 m Alu silver
1330
Drilled
80
ROUNDED DOUBLE FLUTED INSERT
Supplied with black 15 mm insert
R 22
38
LENGTH 3.00 m Alu silver
1340
Drilled
75
LONG SKIRT DOUBLE FLUTED INSERT Special long skirt Supplied with black 15 mm insert 70
Drilled
Accessories 93015
SPARE FLUTED PVC INSERTS
36
WIDTH
LENGTH
BLACK
15 mm
24 m
97131
44 mm
24 m
97132
20 mm
34 m
97134
CYANOACRYLATE ADHESIVE For instant fixing of carborundum and rubber inserts on metal stair-nosings. Dry and grips within 20 seconds. 20 g. tube.
LENGTH 3.00 m Alu silver
1350
FINISHING PROFILES
NONSLIP STAIR-NOSINGS
«Fluted PVC insert» range MINI FLUTED INSERT
40 Supplied with black 15 mm insert Alu silver
20
LENGTH 3.00 m
1460
Drilled
46
MEDIUM
Supplied with 20 mm insert Alu silver
31
LENGTH 3.40 m
1462
Drilled
46
COMPACT LINE
4
LENGTH 2.60 m 4.00 m
TO BE FLUTED INSERT ATELY ORDERED SEPAR
30
To be ordered
separately
Drilled
To be screwed directly to stairs butting up to floor coverings of 4 mm thickness.
Alu silver
1455
1458
Alu gold
1465
1468
Brass
1445
1448
LENGTH 2.60 m 4.00 m
30
Fluted PVC insert
Black PVC
To be inserted by simple pressure.
6700
6710
48
WIDE COMPACT LINE
5
40
Supplied with black 44 mm insert Alu silver
Fitting to bare steps in conjunction with a 5 mm thick floor covering.
LENGTH 3.00 m
1370
Drilled
Stair Repair Profile STAIR REPAIR PROFILES
42
Suitable for repairing worn wooden or concrete stair-nosings. To be nailed down or screwed before laying new levelling compound. Galvanised iron strip. 1.00 m long.
6201
H : 38 mm.
FOR WOODEN STAIRS 40 38
6200
H: 19 mm.
FOR WOODEN STAIRS
20
44
6202 20
H : 20 mm.
FOR CONCRETE STAIRS 37
NONSLIP STAIR-NOSINGS
Soft PVC High resistance to abrasion. 7 types of soft PVC stair-nosings available to suit every kind of stairs.
N 44/56 R with high riser 44
To stick. Caution! Do not stick the skirt to the riser.
N 45 P with claw 45
20
Recycled PVC green product
9
2,5
4,5 24
COLOUR
4.00 m
Black
3030
Grey
3032
Brown
3034
White
3036
COLOUR
4.00 m
Black
3040
Grey
3042
Brown
3044
COLOUR
4.00 m
Black
3050
Grey
3052
Brown
3054
White
3056
COLOUR
4.00 m
Black
3060
45 56
N 50 C rounded
50
COLOUR
4.00 m
Black
3010
Grey
3012
Brown
3014
N 40 C rounded 45
19 3
10 6-8
R18
25
N 35 D straight 40
53
N 50 D straight
47
COLOUR
4.00 m
Black
3070
Grey
3072
Brown
3074
18 2,5
35
20
N 35 BS bevelled edge
3
50
50
NC 42 D straight
COLOUR
4.00 m
Black
3020
Grey
3022
Grey
3062
Brown
3024
Brown
3064
COLOUR
4.00 m
Black
3090
39
Rubber Anti-slip.
65 3
NC 25 BS bevelled edge
5
50
COLOUR
4.00 m
Black
3080
Grey
3082
Brown
3084
42
38
25
STAIR RODS
Stair rods
100 % SOLID PREMIUM BRASS
fitted kit
STAIRROD WITH END STOPS AND STAIRROD EYES
- does not stain aspect, - always shiny no need to polish
ROD LENGTH 0.60 m 0.70 m 0.80 m 0.90 m 1.00 m Polished varnished brass (In individual prepacked sheath) Ø ROD
13 mm
6060
6070
6080
6090
6050
16 mm
6160
6170
6180
6190
6150
Chromium-plated brass, stainless steel effect (In individual prepacked sheath) Polished varnished brass
6071
13 mm
6081
loose Stairrod eyes - End stops - Stairrod clips to be ordered separately.
BRASS ROD
STAIRROD EYE
Polished varnished brass
To be screwed on the stair or riser. Visible length: 27 mm for Ø 13 mm, 30 mm for Ø 16 cm.
ROD LENGTH 0.60 m 0.70 m 0.80 m 0.90 m 1.00 m 2.50 m Polished varnished brass (Loose)
13 mm 6068 6078 6088 6098 6058 6048 16 mm 6168 6178 6188 6198 6158 6148
END STOPS
Ø 13 mm
6021
Ø 16 mm
6121
OPEN
CLOSED
Ø 13 mm
6025
Ø 13 mm
6026
Ø 16 mm
6125
Ø 16 mm
6126
WITH LOCKING Ø 16 mm
6128
Ø 13 mm
6035
Ø 16 mm
6135
STAIRROD CLIPS
Visible length: 12 mm for Ø 13 mm, 14 mm for Ø 16 mm.
Polished varnished brass
!!
NE W
Ø ROD
To be screwed on the stair and the riser. Vertical opening to facilitate the installing of the rod.
Polished varnished brass
CARPET TACKS (screw system)
CARPET TACKS (press system)
For friable materials like marble.
Polished brass. For wood stairs.
6145
6142
6140
Length 45 mm
Brass plug
Length 45 mm
Polished brass
(Supplied with plug) Drill Ø: 9 mm.
Length 20 mm. Drill Ø: 8 mm.
(Supplied without plug)
Carpet stretching CARPET GRIPPERS
NAPLOCK
Superior quality. Medium pins. Supplied in 1.524 m length. 45
22
93881
93884
Standard
Architectural
"A" 22
22
93882
Pre-nailed wood
93883
Pre-nailed concrete
«A»
LENGTH Polished 93914 alu 38 mm 2.70 m Brass-pla93918 ted alu 93913 36 mm Polished brass 2.50 m
39
FINISHING PROFILES
WALL PROTECTION
Acrovinyl Wall Protection • For protecting the bottoms of doors against kicks, central parts of doors against hand marks, walls against possible trolley impacts etc. • Very high resistance to abrasion, scratching, soiling and chemical products. Made of Acrovinyl.
Protection of walls in corridors
M1 FIRE N CLASSIFICATIO
Protection of doors
IN STOCK
Width 30 cm Colour Length 2.50 m
To stick thickness 2 mm
White
4110
Beige
4111
Grey
4112
PROTECTIVE PLATE CUT TO MEASURE
Plate cut to measure
NE W
4099
HEIGHT (mm)
70 35 50 01 10 15
60 19
90 10
White Light Grey Blue Beige green
!!
Price per unit per plate VAT excluded 100 200 300 400 500 600 700 800 900 1000 1200 1220
21
15
10
10
01
04
20
20
02
01 50
50
60
60
30
24
05
19
05
35
White Brown Grey Dark Light Dark Light Blue grey green green blue
Red Salmon Orange Beige yellow
20 cm and 30 cm wide plates are also available in 2 m lengths in all the above RAL colours within short manufacturing lead time, upon request.
LENGTH (mm)
Only 5 colours available
Colours:
Colours:
70
4102
25
Grey
RAL:
70
Beige
4101
80
4100
90
White
10
WIDTH 20 cm Colour LENGTH: 2.50 m
STANDARD PROTECTIVE PLATE
RAL:
Protection of walls in waiting rooms
500
600
700
800
900
AVERAGE LEAD TIME 15 DAYS 1000 1200 1500 2000 2500
Acrovinyl corner profiles PROTECTION CORNER PROFILE Same specifications as for PVC wall protection. Made of Acrovinyl. M1 Fire classification 50 x 50 mm COLOUR Length 3 m
40
White
4140
Beige
4141
Grey
4142
to stick th. 2 mm Also available within short manufacturing lead time, upon request.
FINISHING PROFILES
WALL PROTECTION
Metal corner profiles • Protection of wall corners from all kinds of knocks in hospitals, hotels, kitchens, public buildings etc. Stainless steel recommended. • For a nice finishing of wall corners.
METAL 20 x 10
A
Two main uses:
IVE FIXING ADHES LES FI O PR CORNER g on porous
ck and fixin For a better ta e «Grip» e you to use th walls, we advis ply it onto a surface Ap primer first. vered by the r than that co slightly smalle imer dries at Be sure th pr corner profile. t stick to finger. Then off and does no rner profile. stick the co
93014
PRIMER «GRIP» 0.90 L
30
METAL 30 x 30
20
C DVI E
«Butyl» adhesive
30 10
30 x 30 30 St. steel
2687
2688
30
Alu silver
2717
2718
Stainless steel
Alu gold
2727
«Butyl» adhesive 10 x 20
LENGTH 3.00 m
2647
Alu silver
LENGTH 3.00 m 2.00 m
Alu
50
METAL 20 x 20
METAL 50 x 50
20
50
20
«Butyl» adhesive 50 x 50
50
«Butyl» adhesive 20 x 20
LENGTH 3.00 m 2.00 m
Alu silver
2667
2668
Alu gold
2677
2678
50
LENGTH 3.00 m 2.00 m
St. steel
2737
2738
Alu silver
2767
2768
16110
Stainless steel Alu
CORNER CAP 50 x 50. (packet of 10)
Rigid PVC corner profiles PVC WOOD EFFECT
Also used for finishing parquet and laminate floors in open stair risers (see page 28) Dim 20x20 2.75 m
NE W
To stick.
Oak
2791
Beech
2792
Cherry
2793
Maple
2794
WHITE PVC
To protect wall angles in traffic areas. A
Thickness 1 mm
To stick White colour Dim. : A x A 2.75 m
!!
To cover imperfections and awkward joints around windows or door openings. Glued down application.
A
WHITE PVC MEPLATS Dim.
2.75 m
20 x 2 mm
2770
25 x 2 mm
2771
30 x 2 mm
2772
50 x 2 mm
2774
10 x 10 mm
2780
15 x 15 mm
2782
20 x 20 mm
2784
30 x 30 mm
2786
40 x 40 mm
2788
41
FINISHING PROFILES
WALL PROTECTION
PVC Bumper PVC BUMPER
PVC + ALUMINIUM PROFILE
Drilled
To protect corridor walls against possible impacts from trolleys, wheeled beds etc. Made of aluminium profile screwed to the wall with a rubber tube inserted in the middle. PVC profile which clips onto the aluminium profile. Supplied with screws and plugs.
Width 15 cm COLOUR Length 2.50 m White
4120
Beige
4121
Grey
4122
CONNECTING PIECE
4198
To be inserted in between two bars. The system absorbs impacts through the elasticity of the convex PVC profile and the interior rubber.
Made of Acrovinyl. M1 Fire classification.
All the RAL colours mentioned on page 40 are available on quote and within short manufacturing lead time.
ANTI-IMPACT CORNER PROFILE
PVC + ALUMINIUM PROFILE White
4130
Beige
4131
Grey
4132
55 x 55 mm COLOUR Length 3 m
For improved shock-absorbance this corner profile is made up of: - a screw-on aluminium profile - a PVC profile - a clip-on PVC profile
White
4160
Beige
4161
Grey
4162
End piece
Made of Acrovinyl. M1 Fire classification.
Made of Acrovinyl. M1 Fire classification.
White
4150
Beige
4151
Grey
4152
HALF-MOON SMOOTH
Vertical to protect walls against knocks from chairs, trolleys, tables etc... in corridors, restaurants etc... Halfmoon profile for better impact absorption capacity. Supplied with a drilled aluminium rail to secure the Halfmoon protector.
22
NE W
Elastomer bumper !!
ALUMINIUM + ELASTOMER PROFILE
8
40 18
COLOUR
LENGTH 2.50 m
BLACK
6123
Drilled
ALUMINIUM + ELASTOMER PROFILE
!!
COLOUR
LENGTH 2 m
YELLOW / BLACK
2799
60
Intended for protecting edges in factories, warehouses and car parks.
NE W
DIMPLED CORNER PROFILE
60
Drilled
42
Supplied with a drilled aluminium corner profile. M2 Fire classification rating.
FINISHING PROFILES
WALL PROTECTION
PVC skirtings Plain colours
SEMI-RIGID PVC
Wood shade Black
Brown
Green
Dark grey
Beige
Blue
Light grey
Cherry
Oak
Maple
Beech
DONT FORGET
In homogeneous expanded and extruded PVC.
Height: 60 mm COLOURS 3.00 m
60
11 14,6
Black
2180
Dark grey
2186
Light grey
2181
Brown
2182
Beige
2183
White
2185
Green
2187
Blue
2188
Oak
100
Skirting mitre tool 93780 (see page 52) Polymer sealant adhesive (see page 51)
NE W
3,5
Height: 80 mm COLOUR
3.00 m
2195
Black
2130
Beech
2196
Light grey
2131
Cherry
2197
Beige
2132
Maple
2198
White
2133
25 m rolls
!!
Height: 100 mm
SOFT PVC COVE BASED SKIRTING
SOFT PVC SIT-ON SKIRTING
Thick CONTACT adhesive tape 98260 (see p. 105)
COLOUR
3.00 m
Black
2120
Light grey
2121
Beige
2122
White
2123
ALU
Rigid profile to be stuck or screwed.
100
70
Roll 25 m. 50
70
Roll 25 m.
P 50 T
Roll 25 m.
P 70 T
P 100 T
Roll 25 m. P 70 G Black
2171
Black
2141
Black
2151
Black
2161
Grey
2173
Grey
2143
Grey
2153
Grey
2163
Brown
2175
Brown
2145
Brown
2155
Brown
2165
White
2176
11
11
14
LENGTH: 2.50 m Alu silver
2100
14
43
FINISHING PROFILES
WALL PROTECTION
PVC cap profiles
DONT FORGET
CAP SKIRTING Trimmer MOLOSS 95440 page 102
To be laid after coving the floor. If needed use «MOLOSS» trimmer (see page 102) for a clean cut. Rigid PVC and soft coextruded lip for covering PVC floor thickness. Other colours manufactured on request
Wall scriber 95430 page 102
LENGTH. 3m 15 3 13,5 To stick
White
2410
Black
2411
Grey
2412
Beige
2413
ALU CAPPING 5
Aluminium cap profile to be glued down before installing cove-cap skirting.
LENGTH: 2.70 m
2
3,6
22
Alu silver
2790
To stick
Opening 2.5 mm Adhesive foam
SELFADHESIVE CAPPING
LENGTH: 2.50 m Adhesive
Rigid PVC cap to be glued down before coving the floor. Other colours manufactured on request
NEW COLOURS
19
2,5
Adhesive
CLIP-ON CAPPING STRIP For junctions between PVC flooring and PVC wall covering. Composed of 2 parts: - Fix the base gluing it down - Apply the 2 coverings - Force the soft lip cover into place
2077
White
2091
Black
2092
Grey
2093
Beige
2094
LENGTH: 2.70 m
27
to stick
TILING / PVC FLOORING EDGE
Alu silver
White
2420
Grey
2422
1760
NE W
REDUCER WEDGE 15 m soft PVC reducer roll. Wall PVC covers perfectly the floor covering.
!!
2 LENGTH 2.44 m White PVC to stick
44
2425
to stick
25
FINISHING PROFILES
COVING SYSTEMS
PVC cove formers 2191
2192
COVE FORMER 20 x 20
COVE FORMER 32 x 32 Soft PVC. Length: 2.00 m. Radius: 35 mm.
Soft PVC. Length: 2.00 m. Radius: 25 mm.
32 20
20
32
To stick.
To stick
Cove cap skirtings COVE CAP SKIRTING RIGID PVC
COVE CAP SKIRTING - SOFT PVC One profile = cove former + cap profile. 4,5 To be stuck on the wall.
One profile = cove former + cap profile. To be stuck on the wall.
PROFILES 2 IN 1 100
LENGTH : 3 m
LENGTH: 2.50 m White
2457
White
2450
Grey
2458
Grey
2451
Light grey
2459
Beige
2452
Fits more easily to irregular walls.
30
Cap profiles Carpet edge Rigid PVC. For clean finishing of wall coverings around door frames, partitions, windows, etc... or when coving thin floor covering or carpet on the wall
4 mm
LENGTH: 2.10 m Foam adhesive Alu silver 7
19
4
LENGTH: 2.10 m Foam adhesive
2087
Alu gold
2097
Black
2147
White
8 mm
2157
11
19
8
Alu silver
2117
Alu gold
2127
Black
2167
White
2177
45
FINISHING PROFILES
EXPANSION PROFILES
For the floor BRUSHED STAINLESS STEEL
Veritack adhesive. Thickness 1.5 mm. HEAVY DUTY Side drilling available on request
2.50 m
Brushed stainless steel
2796
2.50 m
Brushed stainless steel
2797
2.50 m
Brushed stainless steel
2798
ALU SMOOTH «INVISIFIX®»
80 5
1 SIDE WITH «BUTYL» ADHESIVE To allow compression or expansion.
3.40 m
1 SIDE WITH PLUGS For a perfect fixing without visible screws.
Alu silver
2846
Supplied with 15 plugs
100 5
3.40 m
Alu silver
2848
Supplied with 15 plugs
ALU FLUTED WITH CLIP - HEAVY TRAFFIC 80 5
3.40 m
«Butyl» adhesive To be fixed with holding clips.
Alu silver
2826
120 5
6887
Holding clip Spring steel. On the floor: 1 clip every ± 30 cm. For joints from 20 to 35 mm wide. Min. joint depth 43 mm. Pack of 10. Price per piece.
46
2.50 m
Alu silver
2837
FINISHING PROFILES
EXPANSION PROFILES
For the floor 60
ALU SMOOTH SELFADHESIVE
4 «Butyl» adhesive on both edges 3.40 m
Alu silver
2806
Alu gold
2807
80 4 «Butyl» adhesive on both edges 3.40 m
Alu silver
2816
Alu gold
2817
100 3 «Butyl» adhesive on both edges 3.00 m
ALU SMOOTH DRILLED + ADHESIVE
Alu silver
2814
NE W
60
!!
4 1 Adhesive + 1 drilled 3.40 m Alu Silver
2801
80
A
4
DV
ICE
1 Adhesive + 1 drilled
affic, With heavy tr illed on one dr le prefer profi ery 22 cm) ev d lle ri side (d hesive coat ad and with an on the other.
3.40 m Alu Silver
2811
100 3 1 Adhesive + 1 drilled 3m
Alu silver
2815
ALU FLUTED ADHESIVE
120 5 «Butyl» adhesive
Side drilling, specific drilling, available on request.
2.50 m
Alu silver
2838
150 5 «Butyl» adhesive
3.00 m Alu Silver
2819
180 5
NE W
«Butyl» adhesive
!! 3.00 m
Alu silver
2841
47
FINISHING PROFILES
EXPANSION PROFILES
For the floor CJD-20
SOFT PVC JOINT (possible welding)
Linoleum / PVC floor INSERT
SOFT PVC INSERT
LEVELLING COMPOUND Intended for 20 mm initial opening joints. Admissible compression or expansion: 2 to 4 mm.
DOUBLE ALU PROFILE
fluted smooth
Joint cover strip composed of: • Two drilled lateral aluminium profiles. • Soft PVC insert as joint, can be clipped onto the lateral profiles. Supplied disassembled in rolls of 4 m.
Flat 3-5 mm
For PVC flooring, linoleum, carpet 96 20
3-5 2
COVERING THICKNESS
ALU PROFILE X 2 LENGTH: 4.00 m
3 mm
1810
BLACK 5/8 mm GREY 5/8 mm
1810
5 mm
PVC INSERT / ml SMOOTH FLUTED BLACK 3 6732 6731 mm GREY 3 6733 6730 mm
6752
6751
6753
6750
Angle profile on request
Flat 3-5 mm - Alu edge
For resine, PVC tiles...
NE W
3-5
COVERING THICKNESS
ALU PROFILE X 2 LENGTH: 4.00 m
3 mm
1840
BLACK 5/8 mm GREY 5/8 mm
!!
5 mm
PVC INSERT / ml SMOOTH FLUTED BLACK 3 6732 6731 mm GREY 3 6733 6730 mm
1841
6752
6751
6753
6750
Flat 8 mm 96
For ceramic or resin.
24 8 2
COVERING THICKNESS
ALU PROFILE X 2 LENGTH : 4.00 m
8 mm
1820
BRASS ROUNDED
PVC INSERT / ml SMOOTH FLUTED BLACK 6752 6751 5/8 mm GREY 6753 6750 5/8 mm
60 3
3.35 m
Brass
1801
80 4
Drilled. Off centre holes.
48
3.35 m
Brass
1802
FINISHING PROFILES
EXPANSION PROFILES
For the wall ANGLE
ROUNDED
FLAT
80 70 40
60
40
4
FOR OUTDOOR USE
2877
2897
«Butyl» Adhesive. ALU SILVER. Length: 2.70 m. To be fixed with holding clips (not supplied). (see p. 46).
6
5
7
2867
80 mm
Without adhesive. ALU SILVER. Length: 3 m. To be fixed with holding clips (not supplied, see p. 46). We advise use of MS polymer adhesive (see p. 41).
2857
60 mm «Butyl» Adhesive. ALU SILVER. Length: 2.70 m. To be fixed with holding clips. (not supplied, see p. 46).
Leakproofing system for façades LEAKPROOFING ELEMENTS
All-inclusive system allowing the removal of draining water off façades, bricks / blocks edges and balconies. It ensures the protection of paint layers, preventing any accumulation of impurities, as well as any unattractive leak marks. The system is completed by three prefab fittings (connecting piece, finishing angles and ends). Use of the fittings is essential for the proper operation of the system.
20
Example of use on balcony balustrade.
45
BEFORE
AFTER
Accessories
Profile LENGTH 3.00 m
CONNEC- EXTERNAL INTERNAL END PIECE TING PIECE ANGLE ANGLE Alu silver White powder coated alu 9010 Alu dyed beige 1015
1 2 3
4 5 6
2885
2888
2891
2894
2886
2889
2892
2895
2887
2890
2893
2896
Connecting piece Allows the required dilation clearance of 4-5 mm indispensable between 2 elements.
1 leakproofing profile 2 connecting profile 3 water drop 4 attachment hole diameter 5 mm 5 jointing filled with polyurethane sealant-adhesive. If necessary, complete by mechanical fixing. 6 balcony nosing
2880
Alu silver White powder coated alu 9010 Beige powder coated alu 1015
150
2881 2882
150
External angle
180
180 Internal angle End cap prevents unattractive leak marks.
49
FINISHING PROFILES
CERAMIC PROFILES
Tiling profile CORNER PROFILES
REDUCER PROFILE
!!
NE W
NE W
!!
Junction between a tile and a flexible floor aluminium
H
PVC aluminium
H
H=
6 mm
H
H
LENGTH 2.50 m 8 mm 10 mm 12.5 mm
LENGTH 2.50 m 8 mm 10 mm 12.5 mm
H=
Raw alu
3206
3207
3209
Alu silver
3440
3441
3442
Stainless steel
3251
3252
3253
Stainless steel
3450
3451
3452
3245
3246
NE W
QUARTER ROUND
!!
MOVEMENT PROFILE
NE W
White PVC
stainless steel
Straight edge stop profile
stainless steel
!!
Visible width 5 mm
STAINLESS H STEEL
H=
H
5 mm
PVC
For walls or bath angles.
LENGTH 2.50 m 6 mm 8 mm
White PVC
3330
3331
Stainless steel
3230
3231
H= Light grey PVC
LENGTH 2.50 m 12.5 mm
3480
3481
3482
H
94839
MOVEMENT JOINTS
4 MAGNET ACCESS PANNEL
9 mm
Set of 4 magnets/plates for making an access panel for a bathtub for instance.
50
!! H= Dark grey PVC
LENGTH 2.50 m 30 mm
3471
NE W
NE W
H
!!
FINISHING PROFILES
ACCESSORIES
Drills
Plugs
TUNGSTEN CARBIDE
Plugs
Ø (mm)
FOR STANDARD DRILLING MACHINES SUPER Tipped drill bit
Ø FOR ENGRAVING DRILLING MACHINES SDS (mm) LENGTH PLUS
5
94175
5
94185
110
6
94176
6
94186
110
16
94194
210
COLOUR Ø (mm)
Drill Ø (mm)
LENGTH 500 / BOX BLISTER 100 25 mm 35 mm 25 mm
PINK
3.5 - 4
5
194143
694143
RED
4 - 4.5
6
194144 194145 94154
YELLOW 2.5 - 3.50
5
BOX OF 100
500 / Box.
100 / Blister.
Screws SCREWS FOR STAIR-NOSINGS
ST. STEEL 94171
CROSS-THREADED FINISH 200 / BOX 100/BLISTER Ø x L mm 3.5 x 25 3.5 x 35 3.5 x 25 BRASS- 94124 94125 694124 PLATED NICKEL- 94134 94135 694134 PLATED ST. STEEL 94174
ZINCPLATED STEEL
CROSS-THREADED 200/BOX 3.5 x 25 3.5 x 35
ST. STEEL
94136
94137
94138
BREAKING PINS
SPECIFIED FOR
These pins can be broken at the required length.
PROFILE JOB SITE TYPE Brass-plated steel Brass Indoors Indoors Nickel-plated polished steel St. steel - Alu silver Stainless steel St. steel - Alu silver Outdoors / indoors MATERIAL
30 mm
POLYESTER CONTACT ADHESIVE BLISTER LOOSE
Polished brass
6310
106310
Chromiumplated brass
6311
106311
Polished brass
6312
106312
Chromiumplated brass
6313
106313
Doughy homogeneous mixture, fast drying, suitable for vertical application. Recommended for fixing metal or wooden tackless strips, fitted carpets, stair-nosings, wall drape profiles… Supplied in 500 ml can with hardener tube (+ - 1 m2 / can).
93015
CYANOACRYLATE ADHESIVE For instant fixing of carborundum and rubber inserts on metal stair-nosings. Dry and grips within 20 seconds. 20 g. tube.
Doors stoppers Fixing on wall Ø 25 mm
93014 LENGTH 60 mm
94160 94165
93010
Doors stoppers Fixing on floor Ø 28 mm 24 mm
LENGTH 25 mm 30 mm
Adhesive
Hidden screws. Rubber stops. Perfect finishing. Supplied in blister card or loose (box of 24 pieces).
Height
BOX OF 50 PACKS OF 100 UNITS
100 / Blister.
200 / Box.
Door stoppers
Special doors stop for laminate (see page 28).
FINISH
Flat countersunk head
STANDARD HEAD FINISH 200 / BOX 100/BLISTER Ø x L mm 3.5 x 25 3.5 x 35 3.5 x 25 BRASS- 94121 94122 694121 PLATED NICKEL- 94131 94132 694131 PLATED
Raised countersunk head
Raised countersunk head
SCREWS FOR COVERSTRIPS
BLISTER LOOSE Polished brass
6314
106314
Chromiumplated brass
6315
106315
PRIMER «GRIP» 0.9 L
Contents: 0.90 litre (See page 41)
93020
MS POLYMER SEALANT-ADHESIVE To stick all types of aluminium, semi-rigid PVC, stainless steel, brass and wood profiles, whatever the support is, even porous (concrete, plaster), even outdoors. No solvent emanation. Supported temperature - 40° à +90°. Fitting temperature: +1° to 30°. Grey colour. 290 ml cartridge. For 10 to 12 m (Ø 5 mm).
51
FINISHING PROFILES
ACCESSORIES
US
Shears E
ned to cut Especially desig verstrips co d de un easily ro ing them. without bend
93400
93405
AVIATION SNIPS
COVERSTRIP SHEARS
Special notched blade. For cutting 10/10e stainless steel, 12/10e brass and 17/10e aluminium coverstrips.
Vanadium chromium plated steel. For cutting the following widths: 17/10e aluminium, 15/10e steel sheet metal, 18/10e brass, 10/10e stainless steel.
93410
93415
RIGHT SHEARS US
MITRE SHEARS E
den For cutting woo s grippers profile for les and PVC profi apes. dr l al w or tiling
Manual tracing 93701
MITRE BOX
18 cm. For mitre cutting at 45 ° of mouldings and cornices of all shapes and widths. Supplied with support (disassembled). Dimensions: 17 x 54 x 29 cm.
93711
SPECIAL SAW
For mitre box 93701. Fine teeth. Length: 50 cm.
93242
TEMPLATE FOR STAIR-NOSINGS
Extendible. Ideal for making and reporting templates of stairs on stair-nosings to be cut to measure.
Min 720 mm. Max 1300 mm. Max with extension 1750 mm.
95430
HEIGHT MARKING TOOL
93780
SKIRTING MITRE TOOL For grooving semi-rigid pvc skirting boards up to 100 mm high
External angle
For drawing along the wall using a pencil (not included). Ideal for coving PVC or linoleum or installing skirtings or edge profiles. Length: 21 cm. Maximum height of drawing: 20 cm.
95440
«MOLOSS» SKIRTING TRIMMER FOR PVC SKIRTING
52
Internal angle
For easy scribing and trimming at the required height when coving the vinyl on the wall. Adjustment each cm between 7 and 13 cm.
Draw with a pencil
Cut the PVC floor on site
SUBFLOOR PREPARATION
Floor stripping
P.54
Wall stripping
P.60
Screeding
P.64
Sanding and finishing
P.68
Fine dust vacuum cleaners
P.73
Moisture treatment
P.75
Heating
P.76
Air treatments
P.77
Moisture control measurement
P.78
Outside Insulation System
P.80
Installation of plasterboards
P.82 53
SUBFLOOR PREPARATION HOW TO CHOOSE A STRIPPER ? Output Machine BS5 Scirocco Rapido Furio Bronco
Carpets
Soft PVC
Rigid PVC
Linoleum
* Up to 35m2/h *** Up to 70m2/h *** Up to 70m2/h **** Up to 100m2/h **** Up to 300m2/h
* Up to 25m2h ** Up to 50m2/h *** Up to 70m2/h **** Up to 100m2/h **** Up to 300m2/h
* Up to 20m2/h ** Up to 35m2/h *** Up to 70m2/h **** Up to 100m2/h **** Up to 300m2/h
* Up to 20m2/h ** Up to 35m2/h *** Up to 70m2/h **** Up to 100m2/h **** Up to 300m2/h
Rubber Glued down textured and parquet sport floors
Ceramic floor
Technical data Weight SelfPower unladen propelled / total
-
-
-
20/20 Kg
no
Electric
-
-
-
55/110 Kg
yes
Electric Electric
-
-
-
77/107 Kg
yes
**** Up to 100m2/h **** Up to 300m2/h
*** Up to 30m2/h **** Up to 100m2/h
*** Up to 30m2/h **** Up to 100m2/h
(-)/157 Kg
yes
Electric
335/565 Kg
yes
Fuel gas
«Bronco» Ride-on stripper ED MUST BE INSUR AS ANY VEHICLE
94635
«BRONCO» RIDE ON STRIPPER
AL HIGH SPEED REMOV TLING IDEAL FOR DISMAN NTS NE PO BUILDING COM SELECTIVELY
Bronco: The most efficient way to remove even the hardest floor coverings, including ceramic tiles. This propane powered machine uses 13 Kg propane tank. It has the best weight / speed ratio available on the market. With a zero turn radius and the mechanically actuated controls it is easier to manoeuvre in tight spaces (no hydraulic servo controls). The Broncos patented suspension system enables it to remove flooring at faster rates with less weight requirement. The smaller size and lighter weight also make it practical for residential floor removal jobs. DEFLECTOR PROTECTS LEGS AGAINST PROJECTIONS SHOCK-ABSORBERS
«Bronco» can remove: vinyl, vinyl tiles, linoleum,......... carpet, sport floor,...................
ceramic floor, parquet,............. resin, residual glue, ................. paint and other floor coatings...
REMOVABLE LEG PROTECTION BARS (IF TOO CLOSE TO WALL)
BALLAST CAN BE REMOVED
Power: Torque: Maxi speed: Noise: CO2 emission: Dim. (cm): Weight: Complete protection for operator
255 x 77 x 2.1 mm
94627
180 x 77 x 2.1 mm 54
Propane powered: one 13 Kg propane tank=8 hours work. Supplied with P-13 standard connector.
«U» BLADES FOR SOFT FLOOR 94636
305 x 77 x 2.1 mm
94634
175 x 77 x 2.1 mm
up to 70m2/h
SEE VIDEO and INSTRUCTION FOR USE
11 KW 40 Nm / 3000 rpm 10 Km/h +- 85 dB 0.01 ppm L 122 x W 74 x H 112 335 Kg unladen, 565 Kg
Front wheel for easy manoeuvring
BLADES FOR HOMOGENEOUS PVC / RUBBER FLOOR 94626
PROPANE P-13 POWERED
up to 200m2/h
BLADES FOR CERAMIC AND WOOD 94638
100 x 100 x 3.2 mm
94639
Width: 25 mm
Bumpers overdimensionned for tank and exhaust pipe protection.
BLADES FOR RIGID PVC / RESIN / RESIDUES 94624
175 x 100 x 3.2 mm
94623
250 x 100 x 3.2 mm
SUBFLOOR PREPARATION
FLOOR STRIPPING
«Rapido» Floor stripper 94645
Selfpropelled «Rapido» stripper
For stripping PVC, linoleum and carpet on medium size job sites, up to 150 m2 / hour. Easy transport. Adjustable handle. Very good weight balance for the best efficiency. Clutch out system for stopping self-propelled when reaching the wall. Power: Blade movement: Speed: Stripping capacity: Total weight:
1650 W 300 rpm 2.5 - 16 m / mn 30 - 70 m2/ H 107 kg
silent 83 DB(A)
Supplied with 3 blades 250 x 60 x 0.7 mm - 1 mm - 1.5 mm, 2 U shape blades 250 x 60 mm.
94644
Flat blade
250 x 60 x 1.5
94643
«U» shape blade 250 x 60 mm
«Furio» Floor stripper 94649 The master power!
Selfpropelled «Furio» stripper
For removing all types of floorings, including wood floor, rubber, sport floors. Additional weight and handle removable for easier transportation. Stopping system when reaching the wall by hydraulic clutching system.
Power:
2600 W with motor soft starter Nb of strikes: 5000 strike/min Speed: 12 m/min Stripping capacity: about 60 - 100 m2/hour Total weight: 157 kg
Supplied with 3 blades 350 x 60 x 1 mm - 1.5 mm, 1 blade 200 x 60 x 1.5 mm, 1 blade 150 x 60 1.5 mm and 2 «U» blades 350 x 60 mm.
94654
Flat blade
350 x 60 x 1.5 mm
94653
«U» shape blade 350 x 60 mm
55
SUBFLOOR PREPARATION
SCIROCCO stripper
94515
FORWARD MOVEMENT CONTROL
SELF-PROPELLED «SCIROCCO» STRIPPER
This self propelled, electric powered, floor covering stripper machine is ideal for removal of a wide range for floor covering materials. Commercial jobs that require efficient and reliable floor removal, special rubber high traction wheels make stripping of very hard stuck vinyl or rubber very efficient. Weight 110 kg.
NE W
FLOOR STRIPPING
SWITCH FOR THE 2 ENGINES
ADJUSTABLE HANDLE HEIGHT
!!
The modular design allows the removal of the weights for easy transportation to and from job sites. Reduced weight is 55 kg.
TECHNICAL DATAS
Length (with handle): Width: Height (with handle): Weight unladen / total:
91 cm 43 cm 84 cm 55 Kg / 110 Kg front: 20 Kg top: 22 Kg base: 13 Kg 1/4 cv 220 V - 2.5 A 550 W 3/4 cv 220 V - 3.2 A 840 W 6.5 m/mn
Additional weight: Advance motor:
Blade hit motor:
TRANSPORT WHEELS
VIEW FROM REAR
Advance speed, unladen:
94536
«U» shape 94538 rubber carpet
Supplied with • 2 blades 20 cm for PVC, linoleum and rubber (1 straight and 1 «U» blade). • 1 straight blade 40 cm for carpet. • 1 blade 15 cm for rigid PVC tiles.
TRACTION WHEELS FORWARD + BACK BLADE ACTION
Soft PVC linoleum
Flat 20 cm 20 cm
94537
Carpet
Flat 40 cm
94534 Flat 15 cm
Rigid PVC tiles
Pneumatic stripper 94690
90425
PNEUMATIC STRIPPER «SCRAPAIR»
COMPRESSOR RP 300 - 2 «V» CYLINDERS 300 L/mn
- 85 cm handle - 6 to 8 bar pressure - Air flow 250m/min - Weight 3.9 Kg - Striking capacity: 3500 strikes/min
HEAVY DUTY HIT ACTION
Powerful compressor, can be used simultaneously for several staplers or for hammer 94690. Supplied without hose Voltage: 240 V. Air inflow: 300 l / min. Max pressure: 10 bars. Tank capacity: 20 L. Power: 3 HP. Weight: 36 kg.
90426
AIR KIT
N UE
Pneumatic stripper for removing PVC tiles, ceramic tiles, old screeds, stuck down parquets, carpets... Special anti-vibration system (80 % less) and lubricator in the handle.
V O !!
Comprising of: - 1 inflation gun - 1 nozzle – 1 x 5 m length of flexible Rilsan tubing and 3 adaptors Soft floor blade + chisel.
Ceramic floor removal
56
Soft floor stripping
Supplied with one 8 cm wide blade, one 4 cm chisel blade, one 12.5 m air hose in a PVC holster.
Spare chisels Chisel 4 cm
94693
Chisel 8 cm
94694
Soft floor blade + chisel Spare soft floor blade
94696 94697
FLOOR STRIPPING
BS «Black Strip» stripper FOR STRIPPING
RUBBER CUSHION For higher comfort
• thermoplastic tiles (with acrylic, neoprene etc. glue) • carpet tiles (with bituminous glue) • thin carpet, homogeneous PVC, linoleum • Backed floor coverings (foam, honeycombed, felt fibres) on concrete base • foam and glue residues • levelling compound residue
ROBUST «T» HANDLE Easier pushing action
FOAM HANDLE More comfortable. Less vibration
ANTIVIBRATION HANDLE
94563
NEW ON/OFF SWITCH ON THE HANDLE For better security
On carpet and PVC, cut the floor covering in strips in widths slightly less than that of the machine blade.
BS-5 STRIPPER
Anti-vibration handle, rubber cushion, ON/OFF switch located on the handle and carrying wheels. Supplied with 2 polished tempered blades (hardness 170 Kg/mm2), a 10 m extension cable and ear muffs.
NEW ADJUSTABLE TELESCOPIC HANDLE
TECHNICAL DATAS
Push continuously but not roughly. (Do not use the machine as a scraper). Keep the blade at a 30° angle.
Power Speed Blade Weight
New locking system
2200 W – 230 V 6500 rpm 210 x 60 mm 20 Kg
«BS» strippers can be used without handle in small areas (on stairs, in WC…).
94562 94561
«BS BASIC» STRIPPER
Cost effective version Same specification as «BS-4» stripper but without extension lead and on/off switch on the handle. Weight: 15.50 kg.
BS-4 STRIPPER
Same specification as «BS-5» stripper, but without carrying wheels, rubber cushion and anti-vibration handle. Weight: 16.80 Kg.
STANDING POSITION
HEAVY DUTY BALL BEARINGS Reliability
New transport wheels. Standing position.
New «U» blade available.
cost effective version
Spare blades 94541
Thickness 1.8 mm
For ordinary jobs and high speed.
94542
Thickness 1 mm
For smoother finishing.
94543
U shape blade 2 mm thick.
For stripping and side cutting at same time.
85065
Carrying case
Metal carrying case with handle.
57
SUBFLOOR PREPARATION
FLOOR STRIPPING
Floor strippers M-SIZED IDEAL FOR MEDIU THAN SS SURFACES OF LE 2 100 m
FOAM HANDLE More comfortable. Less vibration.
PRACTICAL HANDLE Ergonomic and comfortable.
Removing PVC*
PROVEN EFFICIENCY
ENGINE 900 W More resistance More power. Removing carpet* and residual foam
94525
FLOOR STRIPPER For removing all kinds of soft floor coverings. Supplied in cardboard with 1 key for locking the blade.
Power: Speed: Length: Weight:
900 W 10 000 rpm 42 cm 3.5 KG
BLADE: polished tempered steel, width 20 cm. To be sharpened approx. every 50 m2 with a carborundum stone or an oilstone.
94527
Spare blades
94500
CARPET STRIPPER To strip soft floor coverings, especially adapted to remove foam back carpet and PVC.
silent
Supplied in metal box with 1 key, 2 polished tempered steel blades (1 mounted blade 12 cm, 1 blade 20 cm).
Power: Speed:
350 W 10 000 rpm Double insulation 4kg
Weight:
Tempered steel blade Width: 12 cm For PVC flooring
Spare blades 94510
Width: 12 cm. Tempered steel blade 20 cm For carpet and residual foam
For PVC floors.
94511
Width: 20 cm. 58
SUBFLOOR PREPARATION
FLOOR STRIPPING
Long Scrapers 94342
MEGA-SCRAPERS
Aluminium body at an angle with regard to the tube. Telescopic handle. Automatic locking system by turning the handle round a quarter at the required length. Blade width: 20 cm. Spare blades 92530.
94320
SUPER SCRAPER
Mutt scraper
Length: 1.20 m. Spare blades 92520 and 92515. Weight: 550 g.
Heavy duty scraper. Sharpened blade. Length: 1.70 m. Blade width: 18 cm. Resharpable blade. Weight: 3 kg.
94300
FLOOR SCRAPER To remove residues on screeds and old floorings. Beech handle. Length: 1.10 m.
94370
Extendible from 50 to 75 cm. Weight: 1.280 kg.
94380
Extendible from 99 to 175 cm. Weight: 2.060 kg.
94375
Fixed
Length: 1.20 m. Weight: 1.8 Kg. Without telescopic system.
TURN THE HANDLE ROUND A QUARTER TO LOCK IT
94301
Spare blades Extra hard tempered steel. Thickness: 1 mm. Width: 300 mm.
ALUMINIUM BODY
94530
CARPET CLAW 20 cm BLADE
Aluminium alloy. Jaw width: 8 cm.
59
SUBFLOOR PREPARATION
FLOOR STRIPPING
Scraper blades 10 blades / dispenser.
FOR SCRAPER Length 102 mm. Width 14 mm. Thickness 0.45 mm.
Length 102 mm. Width 18 mm. Thickness 0.65 mm.
Length 102 mm. Width 14 mm. Thickness 0.45 mm.
Standard 10 blades carded 100 blades per box
92520
5 blades carded
92560 1-92560
10 blades carded 100 blades per box
Loose packed
92515 1-92515
Length 150 mm. Width 18 mm. Thickness 1 mm.
10 blades carded
COMBINED RIFFLER
92510 1-92510
Length 200 mm. Width 19 mm. Thickness 0.90 mm.
5 blades carded
Width 75 mm
AMERICAN SCRAPER
94265
For scraping paints, laquers... on wood surfaces.
AUTOMATIC WINDOW SCRAPER
Can be used with a hammer.
Fast blade changing system thanks to an automatic tightening and releasing device. Spare blades 92525.
94270
Length: 27 cm.
Blade width: 40 mm.
94271
Comfortable anti-slip handle.
Length: 32 cm.
Blade width: 60 mm.
Spare blades 94275
Width: 40 mm.
1.8 mm stainless steel blade
94276
Width: 60 mm.
SCRAP LACANET
«T» handle. To remove roughcasts and façades. Blade width: 150 mm.
94260
SECURITY WINDOW SCRAPER Retractable blade. Width: 60 mm. Spare blades 92116 to be ordered separately.
94620
Length: 36 cm. 92554
Card with 10 blades. 60
92554
For «MEGA SCRAPERS»
Miscellaneous scrapers 94238
92540
Length 127 mm. Width 19 mm. Thickness 0.90 mm.
For «SCRAP LACANET»
Rounded angles 10 blades carded 100 blades per box
92525
Length 102 mm. Width 18 mm. Thickness 0.30 mm.
For «BIG-SCRAPER»
With notches Length 100 mm. Width 14 mm. Thickness 0.45 mm.
10 blades carded
1-92520
Standard heavy duty 10 blades carded 100 blades per box
Pack of 5 blades.
For WINDOW SCRAPERS
94240
RIFFLER
Blade width: 7 cm.
94605
AMERICAN RIFFLER STAINLESS STEEL BLADE. Mirror finishing with protecting lacquer. Nailing in brass. Allows draining of paint rollers.
92530
SUBFLOOR PREPARATION
FLOOR STRIPPING
Universal scrapers 94315
94305
94310
STANDARD SCRAPER
AUTOMATIC SCRAPER
D.I.Y SCRAPER
Spare blades 92515, 92520 and 92560. Automatic locking system by turning the handle round a quarter. Length: 33 cm. Weight: 320 g.
Length: 30 cm. Spare blades 92520 and 92515. Weight: 230 g.
Reinforced at the junction between head and tube. Length: 30 cm. Spare blades 92515, 92520 and 92560. Weight: 210 g.
Heavy duty scrapers 94340
SOLID STEEL
HIT’S SCRAPER To remove floor coverings glued with neoprene adhesive, using a mallet. Length: 31 cm. Weight: 490 g.
94345
94325
HEAVY BALL SCRAPER
BIG-SCRAPER Length: 42 cm. Weight: 360 g. Tube Ø: 22 mm. Spare blades 92540.
Tube in steel. Body in zamak. Length: 30 cm. Blade width: 10 cm. Spare blades 92515, 92520 and 92560. Weight: 800 g.
For better grip and less blisters
FOAM HANDLE
ELASTOMER HANDLE (More comfortable)
N
CHROMIUM STEEL TUBE
EW!!
92545
Spare blades
Rectangular, sharpened on both sides. Width: 10 cm.
REINFORCED JUNCTION
94346
automatic heavy duty scraper Quick blades locking-unlocking system. Made of zamack. Length: 30 cm. Reinforced junction. Large and thick spare blades 92560. Weight: 400 gr.
Locking system Blade 127 mm
61
SUBFLOOR PREPARATION
WALL STRIPPING GREEN PRODUCT Steam
Wallpaper strippers «MASTER» WALLPAPER STRIPPER
STEPS You can safely reach the top of the walls without step ladder (max weight: 130 Kg).
94555
2200 W / 10 A CAST ALUMINIUM TANK Resists high temperatures.
94556
2900 W / 16 A
Faster steam-up time.
SPOOLS To store the hose.
TANK WITH VISIBLE WATER LEVEL Capacity: 7 l.
AUTOMATIC STOP IN CASE OF SUPERHEATING
Stripper: 94555 94556 Power (W): 2200 2900 Steam-up time (min): 15 10 Operating time (min): 130 100 Steam hose (m): 5 5 Electric cable (m): 5 5 Unladen weight (Kg): 8.7 8.7 Dimensions: H 41 x L 46 x l 40 cm
POWERFUL STEAM Equitable balance of the steam over the steamplate (3 outlets).
94560
WALL COVERING PERFORATOR To strip vinyl wallpapers or those with a metallic finish by permitting steam circulation. Length: 50 cm.
N
Do not add any chemicals
EW!!
94590
Facade treatment 94595
«PULSAR» ELECTRIC SPRAY Efficient and cost effective moto-pump accepting all products even chlorine and acid. Suitable for roof, walls and façade treatments. Polypropylene pump body and viton seal heads. Supplied on transporter.
EVEN ALL PRODUCTS ACID D AN E IN R CHLO Power Adjustable pressure Outflow Range
94594
Coiling drum 94597
440W - 220 V 0 to 15 bars 0 to 640 l/h 6m + wand 25 m hose complete with 60 cm wand
«VITON» ULTRA T RESISTANT JOIN
5 L. SOLVENT SPRAY
Suitable for: removing wall paper, wood and framework treatment, solvent solutions, extermination products, coal tar removing products, façades damp-proofing. Graduated polyethylene tank. Polypropylene pump and valve, «Viton» joints. Complete tube made of glass fibre thickness 4 mm. Supplied with nozzle for flat spray 110°. Capacity: 5 l. Weight: 1.94 Kg.
Hose extension 25 m
Permanent agitation tube ensuring perfect homogeneity through stirring.
Vacuum hose getting into the canister. With valve and strainer
94596
Giant telescopic wand 2.40 m
Same specifications as hose supplied with 94595 Solvent Spray. Adjustable length from 1.5 m to 2.40 m. Spray height: about 5.00 m. Wall damp prooWeight: 0.900 kg.
62
fing application with spray 94595.
SUBFLOOR PREPARATION
WALL STRIPPING
Paint Removers 94550
«LEISTER - SCRAP» PAINT REMOVER
HEAT PROTECTOR.
Powerful: 3400 W - 230V. Temperature: 20° to 650° continuously adjusted. Manual air outflow regulation up to 500 l / mn. Noise: 65 dB. Weight: 1.5 Kg. Electrical cable: 3.00 m.
97007
FOR INTENSIVE USE
Special blade on nozzle for one hand stripping.
Spare resistance
94670
94548
LEISTER «GHIBLI» PAINT REMOVER Power 2000 W. Medium works (3 to 4 hrs). Temperature: 20° to 600°, continuously adjusted. Air outflow: 300 -> 350 L/m Electrical cable: 3.00 m. Noise: 70 dB. Supplied in cardbox. Weight: 1.2 Kg.
DOUBLE FLAME GRINDER
Low temperature thermic grinder for façade products type RPE, resin base or other. Works only with propane gas (medium consumption: 13 Kg/30m2). No risk of thermic shock to the wall. The first flame softens the RPE layer, the second flame removes efficiently. Supplied with a blade, 1 regulator, 1 rubber tubing 25 meters.
94545
FOR FACADE
«WELDY» PAINT REMOVER
For small works (1 to 2 hrs). Power 1800 W - 230 V. Adjustable temperature from 100° to 550°C. Electronic temperature adjustment. Air outflow: 2 positions: 250 - 550 l / mn. Weight: 570 g. Supplied with 3 nozzles (one large). PVC case.
94671
Spare blades
Pack of 5 blades. 3 sharpened sides, width 8 cm. Fixed with auto-lock (1 blade for ± 30 m2).
Miscellanous
d Manufacture » TER EIS by «L
SCRAP LACANET
«T» handle. To remove roughcasts and façades. Blade width: 150 mm.
94620
Length: 36 cm. 92554
Card with 10 blades.
63
SUBFLOOR PREPARATION
SCREEDING
Mixing pump NE W
94100
MIXING PUMP «PUMP 14»
!!
HIGH OUTFLOW
Efficiently mixing and laying levelling compounds on mid/large sites. With 2 rubber 10 m x 25 mm hoses. • 25 m cable - 3 x 2.5 mm2 • 2 sponge balls for hose cleaning • 1 water hose connector • 2 water hose 19-21 mm collars • 1 GEKA 3/4» FI threaded tap connector
45 L hopper «PUMP 14» is a small, light, handy and compact pump. Modular design (3 parts), very easy to transport.
Water hose not supplied. Int. Ø 19 mm hose necessary.
and Ask for VIDEO R USE FO N O INSTRUCTI
Pumping distance - Horizontal: 30 to 40 m - Vertical: 15 to 20 m + 15 to 20 m horizontal
Pump engine: 1300W - 10A Variable speed: 175 to 650 rpm 86 kg Weight (19 + 40 + 27 kg) : 2.5 Bars Minimum water pressure: Output: 4 to 14 L/mn 75 x 60 x 134 cm Dimensions:
New position of bag cutter and filling height, making for a practical, clean and cost effective bag opening.
Mix pressure manometer
Accessories 94113
GEKA 3/4» FI tap connector
94109
94101
94103
Hose 10 m x 25 mm
75 l hopper
raiser over the 45 l hopper
94116
3/4» bushing GEKA
To be set at water hose ends.
94111
Booster To be placed
before water inlet of the machine. To be used if water pressure is under 2.5 bar
Blending booster
System to be placed after the output in the case of levelling compounds containing fibers or lumps
94102
Bag of 20 cleaning balls
Stirrers FOR PAINT
ROUND SHAFT
For drilling machine / mixer with chuck
REACHES THE ANGLES OF THE BUCKET
ZINC PLATED. DOES NOT RUST
FOR ADHESIVE
FOR LEVELLING COMPOUNDS
WITH NOZZLE 1/2“
M14 THREADING For mixers.
TYPE: NOZZLE / THREADING MODEL Ø mm : LENGTH: Ø SHAFT:
64
«C» ROUND SHAFT
M14
94430 94431 94432 94433 94435 94434 60 400 8
80 400 8
100 600 10
120 600 10
120 600 14
160 600 14
«B» ROUND SHAFT
M14
ROUND ROUND SHAFT
POLYGONAL M14 ROUND SHAFT 1/2“
94410 94411 94414
94421
94422
94424
94400
85 500 8
120 600 10
160 600 14
150 600 13
150 600 13
150 600 13
155 600 14
SUBFLOOR PREPARATION
SCREEDING
ROMIX Mixers 94011
«ROMIX ON BATTERY» 24 V MIXER
NE W
Compact and very lightweight wireless mixer. For mixing products liquid to slightly thick (paints, glues) up to 25 litres. Electronic speed control. Supplied in cardbox with a stirrer for paint M10 diam. 100 mm, a 1 hour quick charger and 2 batteries.
!!
cordless WORLD EXCLUSIVE
«ROMIX 1000« MIXER
Protection bars
For mixing products liquid to relatively thick (paint, levelling compound etc.) up to 80 litres of paint and 40 litres of levelling compound. Supplied in cardbox with 1 stirrer for paint and 1 for levelling compounds M14 Ø120 mm • Engine position locking knob. • Progressive start • Fall protection bars
!!
NE W
94013
ES MEDIUM VOLUM SE PO R MULTIPU
Ideal para lugares sin corriente
Speed: Battery: Insulation: Weight:
0 - 550 rpm 24 a IP20 2.9KG
94009
24 V spare battery
Para pequeños volúmenes de hasta 25 litros.
94412
94029
M14 «QUICK FIX» ADAPTER
NE W
Paint stirrer M10
Power: Speed: Weight: Plugging:
1100 W - 230 V 0 - 500 rpm 3 Kg M14
!!
Double accessory for quick no key dirty stirrer removal.
94012 To be screwed upon the stirrer
94028
GRADUATED BUCKET 30 L. PVC. Metal handle. Graduation inside the bucket.
graduated inside
94031
Powerful mixer for all products, even thick types. Up to 70 l of levelling compound. Supplied in cardbox with 1 94414 type stirrer. • Engine position locking knob • Progressive start • Fall protection bars.
Power: Speed: Weight: Insulation: Plugging:
NE W
To be screwed onto the mixer
Protection bars
«ROMIX 1300« MIXER
!!
or LARGE VOLUMES S ED RE SC Y AV HE
1300 W - 230 V 0 - 580 rpm 5.3 KG IP. 20 M14
75 l rubber can
With 2 metal handles
65
SUBFLOOR PREPARATION
SCREEDING
NE W
«i-Tools» - Standing position 95760
S - LESS TIREDNES - SAFE KNEES CTIVITY - BETTER PRODU
95705
I.T. TELESCOPIC HANDLE
Easy and regular spread with ball and socket system on handle - slightly move wrist for left -right tool rotation
Extendible from 1 m to 1.90 m
!!
RAKE 2 spikes I.T.
For applying levelling compounds at the required thickness. Adjustable from 0 to 40 mm. Length 60 cm. Handle to be ordered separately.
95761
Pair of spikes
i.t. levelling compound rake For applying levelling compounds. Width 600 mm - teeth 5 x 5 mm. Handle to be ordered separately.
I.TOOLS adhesive spatula
28 mm spare teeth blades to be ordered separately. See page 107, 94898 to 94909.
95710
Without handle 95712
95715
With handle
Without handle 95716
With handle
95711
Spare blade
5 x 5 x 3 mm
95720
95725
Mini mixing trolley ITOOLS
I.T. Mixing station
For applying adhesive, levelling compounds... Easy and effortless spreading (blocking and break system). Supplied with a bucket 30 L.
For levelling compounds and adhesives. Supplied with a multipurpose fixing system valid for any type of mixers, a 75 litres bucket and a special M14 threaded stirrer.
95721
Spare bucket 30 L.
95726
Bucket 75 L. 95727
I.T. stirrer
Spiked rollers • To apply levelling compounds and eliminate air bubbles.
Monobloc spiked roller
SUPPLIED WITH PROTECTOR Spikes 11 mm Width 500 mm
Supplied with metal frame and protector (for 11 mm).
94241 94242 94239 94248 94246
Spike thickness (mm)
Roller With or without width protector 250 mm included 500 mm included 750 mm included 500 mm no protect. 250 mm no protect.
Independent discs spiked roller Special for circular movements without damaging the levelling compound. No protector.
94247
250 mm no protect.
SPIKED SHOES Ideal for walking on wet screeds or levelling compounds.
94255 Spikes 11 mm Width 250 mm
66
See handle page 65
Spikes 31 mm Width 250 mm
Spikes 40 mm 94256
Spikes 25 mm
SUBFLOOR PREPARATION
SCREEDING
Trowels FLEMISH TROWEL
94280
Aluminium. Non bevelled blade. Pointed end for smoothing in angles.
RAKE FOR SELF-LEVELLING COMPOUNDS
To apply self-levelling compounds, resin epoxy at the required thickness. Supplied with 2 adjustable skates (from 6 to 30 mm). These skates can also be removed for standard use. Blade: L. 80 mm x W. 100 mm x Th. 0.6 mm.
94200
Tempered steel blade 94201 Stainless steel blade
94202
Tempered steel blade 94199 Stainless steel blade Dim. 70 x 12 cm.
Dim. 45 x 12 cm.
Dim. 70 x 12 cm
ITALIAN TROWEL
N
Dim. 45 x 12 cm.
EW!!
94285
Spare blade 93665
94286
Spare skates
Wooden handle
Length: 1.50 m. Ø 3 cm.
Set of 2.
Aluminium. Dimensions: 28 x 12 cm.
SPIKED RAKE FOR LEVELLING COMPOUNDS
Easy accurate levelling at a required thickness. Adjustable spikes from 0 to 10 mm. Can be used even on uneven floors.
94235
Stainless steel blade 94230 Tempered steel blade 94580
94295 8 spikes
FINISHING TROWEL
spikes 94297 6Width: 58 cm.
For perfect and easy smoothing of levelling compound. Tempered steel blade, L. 4300 mm x W. 60 mm x Th. 0.6 mm.
«TRIO» ROLLER
Spare spikes 10 / pack.
94290
LEVELLING COMPOUND TROWEL WITH INTERCHANGEABLE BLADES N
94599
94299
Width: 80 cm.
EW!!
For applying self-levelling compounds, resin epoxy at 1.5 or 5 mm thickness (depending on mounted discs). Width 510 mm.
For spreading levelling compounds. Two square-toothed blades (4 x 4 or 6 x 6) of 28 cm, to be ordered separately. Length: 560 mm.
94294
Supplied with 16 discs: 4 x 1.5 mm, 4 x 2 mm, 4 x 3 mm, 4 x 4 mm and 4 x 5 mm.
94296
Spare blades 4 x 4 mm
teeth (2 pieces to be ordered)
Spare blades 6 x 6 mm
teeth (2 pieces to be ordered)
Carborundum stones 94330
RECTANGULAR GRINDING STONE 2 different sanding grits. Dimensions: 35 x 90 x 135 mm.
94350
RECTANGULAR GRINDING STONE WITH HANDLE Dimensions: 35 x 100 x 200 mm.
94360
CIRCULAR GRINDING STONE
To sand screeds in a comfortable way in standing position. Cast-iron body: heavy and robust. Ball pivot. Broomstick to be ordered separately. Height: 40 mm. Ø 180 mm.
94365
Spare circular stone
ALVEOLUS Each alveolus means an additional sanding edge. The dust stays in the holes.
94351
Spare rectangular stone 67
SUBFLOOR PREPARATION
SANDING AND FINISHING
Sanding levelling compounds 94452
94770
DISC WITH 5 CARBORUNDUM STONES
DRIVING DISCS FOR SANDING DISCS Rigid disc with central screw fixing system for sanding discs diam. 420 mm.
For grinding concrete, hard levelling compounds. Cone-shaped grinding stones. Grit 16.
94464
Spare cone-shaped stone
DOUBLE SIDED SANDING DISCS
TUNGSTEN CARBIDE DISCS
Central hole for easy fastening
For grinding concrete and levelling compounds. Very longlasting discs Ø 420 mm. Exists also in Gr 6, 14, and 24 (see p. 70).
Made of silicium carbide Ø 420 mm 94453
Grit 16
94456
Grit 60
94454
Grit 24
94457
Grit 80
94455
Grit 40
94458 Grit 100
94922
Grit 36
94923
Grit 60
To be fastened on felt disc 94749 and then on driving disc 94452.
To be fixed on driving disc 94452.
Also available in Ø 400 mm
Maintenance 94471
94468
DETERGENT BIN
DRIVING DISC FOR PADS
Disc with rigid PVC spikes for fastening maintenance pads. Ø: 420 mm.
Especially suited for cleaning. Lever switch located on the handle for controlling spray of liquid. Capacity: 10 l. Supplied with fastenings.
MAINTENANCE PADS.
94779
Disc Ø 430 mm.
94472
PADS FOR CARPET AND RUG MAINTENANCE
94473
Green
Black
For wet maintenance of carpet. Ø 430 mm to be fastened on disc 94471.
To clean wet floors.
To scrub old wax.
94470
SCOURING BRUSH DISC
94475
94474
White hard nylon fibres brush to scour tile flooring, marble and stone floors.
Beige
Red
For polishing.
For maintaining Vinyl and linoleum.
94469
SHAMPOO BRUSH DISC
Blue and white soft nylon fibres brush to shampoo carpets.
Vacuum kits 94774
VACUUM SKIRT
Allows most of the fine sanding dust to be properly vacuumed. Ext. tube diameter 30 mm.
fits on all discs p. 68 and 70
R NOT SUITABLE FO FINE DUST
94460
VACUUM KIT
To suck up all dust when sanding wood. Includes: 1 PVC tank vacuum (for dust). Power: 1000 W. Sucking up: 190 m3 /h. Capacity: 9 L. Weight: 6 Kg. Supplied with: 1 filter for fine dust, 1 vacuum skirt + hose, 1 fastening system.
94461
Dust collecting bag / 10 94462
Filter for fine dust 68
Example of skirt fixed on a fine dust VACROM vacuum cleaner 93975 (see p.71).
FOR WOOD
SUBFLOOR PREPARATION
SANDING AND FINISHING
«SANDY» Sanding machines This heavy duty sanding machine will sand and grind concrete and levelling compounds, sand parquets... Also dedicated for the maintenance of PVC flooring, carpets, ceramic floors, marble, stone-floors... Bayonet fastening system for easy disc and accessory change. Engine block and handle packed separately. Discs and accessories to be ordered separately.
SECURITY SWITCH (Unlocking)
SWITCH LEVERS
HANDLE HEIGHT ADJUSTMENT LEVER
FLOOR SANDING MACHINE
3 MODELS
CONTROL LEVER FOR LIQUID SPRAY (when using detergent bin)
Speed: 154 rpm. Electrical cable: 12 m. Ø 420 mm disc.
94451
1500 W - 230 V Weight: 45 kg. Multipurpose.
METAL HANDLE (Adjustable height)
SLIDING SUPPORT (For fastening vacuum cleaner or detergent bin)
94476
1850 W
- 230 V Weight: 45 kg. Heavy duty.
94487
1850 W - 110 V 94480
94489
Add. weight 10 kg
2400 W - 230 V Weight: 46 kg. The Max Power. FASTENING OF DISCS Turn the machine upside down, and lay it down gently flat on the handle. Place the disc inside of the bayonet catch. Lock it by turning it anti-clockwise.
3 ADVANTAGES for using Ø 420 mm ROMUS Sandy and Ø 420 mm Discs ! - Up to 25 % more sanded surface, - Up to 20 % more efficiency compared with machines Ø 375 and 400 mm - Sanding up to the edge of the wall
RUBBER WHEELS
RUBBER BELT (To protect skirtings) Sanding floor
SPECIFICATIONS Sanding levelling compounds
SANDING
MAINTENANCE
PARQUET
Stripping rest of adhesives, foams and old flooring (e.g. carpet & vinyl) Sanding rest of adhesives, epoxy paints, dirty grease on industrial floors
- 5 carborundum stones disc (94770 + vacuum skirt (97474) + fine dust vacuum cl. - 5 Carbide milling cutters disc (94465) + vacuum skirt (97474) + fine dust vacuum cl. - Wire brush disc (94467) - 5 Carbide milling cutters disc (94465) + Tungsten carbide disc Gr 14 - Tungsten carbide disc Gr 14 (94751) - 5 Carbide milling cutters disc (94465)
Maintenance of Vinyls
- Driving disc / pads (94471) + dry maintenance pads beige or red + spray
Maintenance of carpets
- Shampoo brush disc (94469) + detergent bin (94468) - Driving disc / pads (94471) + Pad for maintenance of carpets and rugs + light spray
Maintenance of ceramic, marble, stone floors
- Driving disc / pads (94471) + green pad for wet maintanance. - Scouring brush disc (94470) + detergent bin (94468)
Sanding parquets
- Satellite disc (94794) + sanding discs Ø 225 mm felt back - Driving disc / sanding discs (94452) + felt pad (94749) + metal mesh disc Gr 60 to 150
Maintenance of parquets
Sanding marble
- Driving disc / pads (94471) + black pad (for scrubbing old wax or varnish) or + green pad (after applying pore filler) or + beige pad (for lustring). - Driving disc / pads (94471) + beige pad (after applying varnish, wax or oil) - Driving disc / pads (94471) + felt disc for pads (94910) + 5 diamond pads Gr 30 to 800 + wet floor
Polishing marble
- Driving disc / pads (94471) + natural fibre pad + crystal powder + wet floor
Sanding and smoothing concrete screeds
Varnishing / waxing / oiling of parquets
MARBLE
- Driving disc / sanding discs (94452) + disc 420 Gr 16 - 24 - 40 + vacuum skirt (97474) + fine dust vacuum cl. - 5 carborundum stones disc (94770) + Vacuum kit (94460) - Driving disc (94452) + Tungsten carbide disc (94751)
69
SUBFLOOR PREPARATION
SANDING AND FINISHING
Surfacing TUNGSTEN CARBIDE DISC 94920
Grit 10
94751
Grit 14
94921
Grit 24
94922
Grit 36
94923
Grit 60
94465
5 CARBIDE MILLING CUTTERS DISC
Ø: 420 mm. Double sided disc. To be fastened on driving disc 94452. To rough surfaces for better paint adhesion, remove felt, concrete cement grout.
To remove residues such as foam, grease, lacquers, adhesive, epoxy resins, paint … 8 edges for each milling cutter.
94466
Spare grooving blade 94761
DISC FOR CERAMIC FLOORS
94479
CARBIDE RING DISC
5 rubber rakes for filling ceramic ceramic floor joints.
Grit 10
94762
For roughing surfaces (better adhesion, e.g.: floor paints, resin epoxy) and removing residual adhesive, foam, felt... Weight: 11 kg. To be fastened directly to the sander.
Spare rake
94777
94467
5 TUNGSTEN CARBIDE WHEEL PLATE
WIRE BRUSH DISC
Heads with 6 wheels to remove all types of adhesive, foam, felt and damaged levelling compounds.
To remove all kinds of soft materials and other residual, such as foam, fibres (carpet & vinyl) …
94478
Spare carbide wheel
94497
94873
HELICOPTER DISC
3 DIAMOND DISC
For smoothing concrete screeds 6-7 hours after pouring, when they have started firming up. 54 cm diameter. 4 finishing blades.
For removing concrete glazed finish (for better adherence).
94874
Diamond disc
Sanding parquet 94749
94794
FELT DISC
SATELLITE DISC
Ø 420 mm. For mesh discs. To be fastened on driving disc 94452 (see page 68)
Made of 5 independent rotative discs for sanding parquets without marks. Auto-grip system.
METAL MESH DISCS
SINGLE SIDED SANDING DISC
Ø 420 mm.
94756
Grit 60
94757
Grit 80
94758 Grit 120 94759 Grit 150
Ø 125 mm. Felt back. To be fastened on felt disc 94749 and then on driving disc 94452.
Grit 24
94795
Grit 40
94796
To be fastened on satellite disc 94794. Grit 60
94797
Grit 80
94798
Grit 100
94799
Marble polishing and maintenance procedures Dirty marble
Rough and uneven marble
In good condition -> CRYSTALLIZATION.
94763
NATURAL FIBRE PAD
70
To be applied with wet crystal powder. It may be used for smoothing slightly scratched PVC flooring. Diameter 430 mm.
94764
CRYSTAL POWDER Can of 5 kg. For crystallising calcareous flooring. Consumption ±50 m2/kg.
In poor condition -> SANDING.
PADS FOR MARBLE
For wet polishing of marble. Auto-grip. Fasten 5 pads per felt disc.
94910
94911
FELT DISC for pads
94912
To be fastened onto the driving disc for pads Ø 420 mm. Pads to be ordered separately.
94913 94914 94915 94916
Grit 30 brown Grit 60 green Grit 120 black Grit 220 brick red Grit 400 ochre Grit 800 cream
SUBFLOOR PREPARATION
SANDING AND FINISHING
Sanding parquet Ø 330 mm PADS Beige Red
94655
94656
Ø 330 mm PARQUET POLISHING BUFFER KIT
Ø 330 mm spiked DRIVING PLATE
94657 94658
kit for - light sanding - parquet polishing
94659
Ø 330 mm «SHEEPSKIN» DISK
Ø 330 mm MESH ABRASIVE DISCS Grit 80 Grit 120
Includes all that is necessary for light sanding and polishing of parquet after application of oil or wax. That is: - 560W floor cleaner/buffer - 1 Ø 330 mm driving disc with spikes - 2 Ø 330 mm pads (1 white - 1 beige - 1 red) - 4 mesh abrasive discs (2 gr 80 - 2 gr 120) - 1 Ø 330 mm «sheepskin» disc Power: Speed: Weight: Diam:
94468
DETERGENT BIN
94651 94652
560 W 199 rpm 25 Kg 330 mm
Especially suited for cleaning. Lever switch located on the handle for controlling spray of liquid. Capacity: 10 l. Supplied with fastenings.
Grinding TED HYPER VENTILA ENGINE
94630
«RABOTEX 2» GRINDER
94540
GRINDING MACHINE BEF 203
For preparing medium-sized concrete, asphalt, steel, stone supports. Removes old levelling compounds, paint, concrete, residual adhesive, grease, rust, grinds concrete (for better paint adhesion). Continuous depth adjustment. Adjustable handle. Suction slot for fine dust vacuum cleaner. Working width 200 mm
Power: Performance - mm screed: In one go: Milling drum speed: Dimensions: Weight:
Ideal for industrial floors, concrete or plaster wall. Makes a rough surface. • 6 mm on 1 m2 removed in less than 2 minutes • Two very stable rotation discs • Vacuum slot for plugging vacuum cleaner • Safety lock system • High ventilated cooling system • Adjustment of grinding depth • Very precise depth adjustment
2200 Watts 35 m2/h - 1mm 1 to 2 mm 1735 rpm 50 x 36 x 122 cm 49 Kg
94506
Kit 70 spare Tungsten wheels
For roughing the surface
Supplied in metal carrying case with key set and 2 axes with 16 carbide wheels. Power: Torque: Speed: Working width: Depth: Weight:
800 Watts 10 Nm 1100 rpm 190 mm up to 6 mm 4.8 Kg
To be used as a supplement to a VACROM vacuum cleaner, see page 74
94632
Set of 16 spare wheels
Supplied with a milling drum with 70 tungsten milling wheels.
71
SUBFLOOR PREPARATION
SANDING AND FINISHING
Grinders ALL ROUNDER GRINDER!
94547
«SU-100» UNIVERSAL GRINDER
Power: Speed: Diamond disc: Weight:
NE W
Versatile machine for blastering levelling compounds, resins, roughcasts, adhesive - cement residues, etc... - Exceptional stripping power. - Monobloc diamond disc. - Dust protection cover with brush. - Locking knob - Slot for vacuum extract, can be connected to VACROM vacuum.
!!
94615
CARBIDE GRINDER
Power: Speed: Weight: Dim:
OFF CENTER AXLE FOR BETTER ACCESS ALONG SKIRTINGS
For removing residual adhesive, ceramic, cement, plasterboard on middle size surfaces. Off-centre tungsten carbide disc, for working along the skirting. Special carter with slot Ø 32 mm for vacuum. Supplied in cardboard with 1 disc grit 14.
1500 W 6000 rpm Ø 100 mm 3.9 KG
94546
900 W 10 000 rpm 2.8 kg 400 x 200 x 150 mm
Ø 125 mm Tungsten carbide discs 94616
Grit 14
94617
Grit 24
94618
Grit 30
Diamond disc SU 100
Carbide sanding solutions 94355
94354
CARBIDE HAND GRINDER
«ABRARAP» SANDER - GR.80
For aggressive roughing of floors, even along skirtings. Can also grind plasterboards, remove foam residues, adhesives… Wooden handle. Grit 24. L x W: 17.5 x 10 cm. Return: 2.2 cm.
For manual, easy and aggressive sanding. To be used with tungsten carbide sanding plates. • Heavy duty: Steel plate with tungsten carbide, 160 times more resistant and longlasting than standard sanding paper! • Easy cleaning with a wire brush. Ideal for polishing dry or wet wall or floor supports.
Supplied with Gr 80 sanding plate. Dim. 100 x 60 mm.
TUNGSTEN CARBIDE DISCS
- For removing residual adhesive, paint, lacquers, foam. - For grinding anhydrous screeds, evening up concrete floors and levelling compounds.
Spare Sanding Discs 94356
Gr 36 fine, concrete.
Flat shape 94616
72
94357
Gr 80 very fine, plaster,
Grit 14
94617
Grit 24
94618
Grit 30
celullar concrete. To be used on sanders and grinders.
94358
Gr 120 super fine, plaster 94359
G 240
Utra fine, wood finish, car industry, metals.
SUBFLOOR PREPARATION
SANDING AND FINISHING
Wall sanders
Rapid connection to vacuum cleaner Handle switch and speed regulator
Engine close to the head. Better handiness.
95965
«W-3000» SENIOR WALL SANDER Sander for walls and ceilings. Light weight and well balanced. Very manoeuvrable.
Multi-directional articulated head
Plate with light suction cup effect, if used with a vacuum cleaner Vacrom.
Power: Speed: Length: Sanding disc diameter: Weight:
550 W 650-1300 rpm 1.52 m 225 mm 3.6 KG
Supplied in transporting sheath with 4 m vacuum hose.
95959
Sanding ceiling
Sanding wall
Left part removable for sanding in angles.
Auto-grip plate for sanding discs diam. 225 mm
Spare foam 95955
«W-1000» JUNIOR WALL SANDER For easy, effortless and precise sanding.
HIGH OUTPUT
Foldaway part for sanding in angles
Very manoeuvrable
ABRASIVES Ø 225 mm
97838
Aluminium oxide. Felt back
Flexible suction hose, 4 m
Direct connexion with VACROM Power: Speed: Sanding disc diameter: Weight:
1200 W 650 - 1300 rpm 225 mm 3.1 kg
Supplied in PVC carrying case without vacuum hose
Grit Grit 40 Grit 60 Grit 80 Grit 120 Grit 220
Fine dust vacuum cleaners ER CLEANING AUTOMATIC FILT WITHOUT BAGS
93975
VACUUM CLEANER «VACROM»
Industrial vacuum cleaner for collecting: - very fine dust when grinding plaster, cement, concrete - liquids. SPEED CONTROL
Ref.
95795 95796 95797 95798 95799
93976
Set of 2 spare filters - Dust class M
- Holds back 99,93 to 99,99 %
2 CASSETTE FILTERS SURFACE 8600 CM2 Electromagnetic pulse filter cleaning system. The automatic vibrator uses work breaks for automatic cleaning.
ON/OFF SWITCH WITH SLOW START
93977 ELECTRICAL APPLIANCE SOCKET WITH AUTOMATIC ON/OFF SWITCH CONTAINER 25 L (WITHOUT BAG)
2 stage motor: Max airflow: Max vacuum: Tank capacity: Dimensions H x L x W: Weight: Cable:
1400 W max 61 l / s 248 mbar 15 l 560 x 400 x 400 mm 12.7 Kg 8m
Paper bag (pack of 5)
Although cleans without a bag, provides for a more practical removal of collected debris.
Accessories 35 mm Ø - 1 flexible suction hose, 5 m - 1 stainless steel tube handle - 2 stainless steel suction tubes 50 cm each - 1 professional universal nozzle - 1 crevice nozzle - 1 rubber nozzle 23 cm.
73
SUBFLOOR PREPARATION
VACUUM CLEANERS
Fine dust vacuum cleaners DOUBLE FILTER
93985
RONDA VACUUM CLEANER 1 ENGINE ®
To be used with sanding machines or grinders (e.g. RABOTEX)...
93986
Industrial vacuum cleaners designed to collect fine dust from sanding: - plaster, cement, concrete... - lead paint...
RONDA® VACUUM CLEANER 2 ENGINES
To be used with machines producing huge quantities of dust (eg. grinding machine BEF201 / 203).
MULTI-TUBE FILTER AND FILTER CLEANING
Coupling starter for sanding machine
Start Stop
Pressure valve for multi-tube filter cleaning
a
b
The multi-tube filter is mounted directly in the container (a). Each Teflon-coated filter tube (b) ensures a self-cleaning effect. The filter is designed to retain particles larger than 5 microns. When the pointer of the manometer reaches the red section, the filter Socket for has to be cleaned up (c). plugging portable electrical equipment Manometer
c Not suitable for collection of liquids.
Bypass vacuum motor: Suction capacity: Air volume: Noise level at 1 m: Filter surface (multi-tube filter): Collection capacity: Dimensions H x L x W: Weight (without accessories): Max power of the connected tool: Cable:
93992
Spare multi-tube filter
d
To clean the filter: Pull out the pressure relief valve (d). Fresh air will float the opposite way. Dust will be released and fall in the container. The RONDA® vacuum cleaner meets the requirements of EN60335-2-69: 1998 Annex AA for collecting health-hazardous dust category «H». 1200 W / 230 V 2400 mm 60 l / second 69 dB (A) 8000 cm2 16 l 780 x 425 x 425 mm 15 Kg 1800 W 10 m
SYSTEM FOR FINE AND HEALTH-HAZARDOUS DUST CATEGORY «H» - HEPA filter (dust category «H»). - Retains 99.999 % of all particles larger than 0.3 microns. Dust collection: - Directly in the container or in a paper bag P10 for fine dust. - In a double bag, consisting of a paper bag P10 built into a plastic safety bag for dust category «H» (RONDA 1 motor only)
93993
Supplied accessories Ø 40 mm: 1 hose of 4 m, 3 extension tubes, 1 round brush, one 370 mm floor nozzle with brush and wheels, 1 crevice tool, 1 dusting brush with adapter.
Pack of 10 paper bags
93994
Bypass vacuum motor: Suction capacity : Air volume: Noise level at 1 m: Filter surface (multi-tube filter): Collection capacity: Dimensions H x L x W: Weight (without accessories): Max power of the connected tool: Cable:
93982
Spare multi-tube filter 93983
1 spare bag
Safety bag + paper bag
Dorsal vacuum cleaner DORSAL VACUUM CLEANER «T-1»
Ideal for narrow crammed and difficult working environment, like scaffoldings.
NE W
93988
Spare paper bag Polypropylene tank. Supplied with standard brush set. With 3 adjustable belts for max. comfort.
74
R NOT SUITABLE FO FINE DUST Can be connected to slow sander PBV 225 (94057) for external thermal insulation polystyrene plates
93989
Power Vacuum Air flow Noise level Tank capacity Dimension L x H x W Weight Cable
!!
1300 W 290 mbar 51 l/s 58 db(A) 5 litres 240 x 495 x 220 mm 4.5 kg 10 m
2400 W / 230 V 2400 mm 120 l / second 73 dB (A) 11000 cm2 58 l 1100 x 550 x 550 mm 31 Kg 1800 W 15 m
SUBFLOOR PREPARATION Dehumidifiers
KLY TO DRY UP QUIC STER, SUPPORTS (PLA SCREED ...)
DEHUMIDIFIER 108 L
Condensator
Wet air
Dry air
Collector bin or permanent draining connection
Compressor
POWERFUL AND ROBUST
94398
HOW IT WORKS: Ventilation
MOISTURE TREATMENT
- Metal structure. - Big and strong carrying wheels. - Display control indicating air moisture. Automatic stop when targeted moisture rate is obtained. - Electronic hygrostat.
Out slot: air comes out 2 to 3 degrees warmer
Permanent draining (no collecting tank)
BEST VALUE FOR MONEY
Extraction capacity at 30 °C and at 80 % of relative humidity: Max surface / volume range of use Air flow Operating temperature Power Dimensions (L x W x H) Weight
A
Continuous operation by removing the collecting tank + hose (supplied)
800 m2/2000m3 850 m3/h 5 to 35° 1790 W 59 x 44 x 1115 57 kg
94440
DEHUMIDIFIER 60 LITRES
• ABS belt • Transport wheels and handle • Automatic stop when collector bin is full
30°C 25° C 20° C Maximum surface / volume range of use Tank capacity Operating temperature Power Dimensions (L x D x H cm) Weight Extraction capacity at 80 % of relative humidity
Integrated trolley
108 L.
60 litres 45 litres 38 litres 500 m2/1200 m3 6 litres 7 to 35° C 880 W 34 x 52 x 72 28 Kg
94407
ICE DV
DEHUMIDIFIER 20 LITRES hance the In order to en ficiency, extraction ef ded to use: it is recommen ce vi - a heating de ) 76 (see page 77) a fan (see page
• Metal structure. • Wheels and handles enabling easy transport. • Automatic stop and warning diode signal indicating when collector bin is full. • Adjustable hygrostat. • Sound between 39 and 54 dB. 30° C 20 litres 25° C 15.5 litres 20° C 13 litres Maximum surface / volume range of use 200 m2/500 m3 Tank capacity 5 litres Operating temperature 7 to 35° C Power 350 W Dimensions (L x D x H cm) 33 x 30 x 58 Weight 22.5 Kg Extraction capacity at 80 % of relative humidity
75
SUBFLOOR PREPARATION
Warm air generator
KID-30 PROPANE - BUTANE
A
93450
DV
ICE ONLY FOR USE VENTILATED LOCATIONS
For rapid heating of buildings of up to 300 m2 using clean combustion. Output temperature about 250째 C. Suitable for installation of heatretractable ceilings. Piezo-electric ignition. Gas pressure regulator, over-heat thermostat and pipe-break safety system. Supplied with 1.50 m flexible hose and regulator. Can operate using a single 13 kg butane gas cylinder. Maximum operating time with a single 13 kg cylinder at maximum power: about 5 hours and with a 31 kg gas cylinder at max power: about 12 hours.
Power Kw / Kcal/hr: Gas consumption: Hot air flow : Max. volume / surface: Dimensions L x w x h: Weight:
HEATING DEVICES
IN
93445
GRYP-28 FUEL OIL
For heating rooms over long periods. Fixed output temperature approx. 250째 C. Chimney-less hot air generator with compressor. Stainless steel combustion chamber. Flame control by photoelectric cell. Reservoir operating time: approx 10 hrs. Ideal for drying when used with a dehumidifier. Operates on domestic fuel oil or diesel.
min 12.4 / 10682 max 31.2 / 26814 min 0.98 Kg/hr max 2.46 Kg/hr 750 m3/hr 900 m3 / 300 m2 53 x 28 x 40 cm 11.5 Kg
N
93436
Power: Tank capacity: Max. fuel consumption: Hot air flow: Max. volume / surface: Dimensions L x w x h: Weight (unladen):
93446 Adjustable power: Operating pressure:
GAS RADIATOR
For indoor and outdoor proximity heating. Operates on butane or propane without requiring adjustment and fits directly onto 13 to 35 kg cylinders. Operating safety ensured by thermocouple.
EW!!
Consumption:
INDOORS / OUTDOORS
28 Kw / 24100 Kcal/h 30 litres 2.7 litres/hr 500 m3/hr 900 m3 / 300 m2 86 x 48 x 53 cm 31 Kg
Operating time with 13 kg cylinder: Dimensions L x W x H: Weight:
from 2370 to 4170 W from 20 to 60 m bar 203 to 350 g / hour Propane or butane 42 hrs at 50 m bar 390 x 295 x 130 mm 2.5 Kg
Thermostat
Designed for temperature regulation of the GRYP-28 fuel oil. 10 m extension cable.
Electrical 93475
RED PLANET BLOWER
For gradual heating of rooms up to 30 m2. Oxidation resistant solid metal structure. Hot air pulse fan. Ambient thermostat. Safety sensor in case of overheating.
Power: Hot air flow: Voltage: Current: Noise level: Dimensions Lxwxh Weight:
1.65 to 3.3 kW 400m3/hr 220 V - 50 Hz 14.3 A 50 dB 250 x 250 x 420 mm 7.5 kg
93480
93470
MOBILE INFRARED
Highly efficient instantaneous halogen infrared heating (maximum power reached in 2 seconds) over a maximum area of 5 m x 5 m. The effect of this quartz infrared heating is comparable to that of the sun. No odours, no fumes, no oxygen consumed. Silent, no displacement of air. Steel body. Wheels and handles for easy transport and storage. Two rows of three lamps. Indoor and outdoor use.
LOTUS Ceramic radiator
Perfect for heating small areas (about 6 m2) which require rapid clean heating. 3 ceramic plates, 2 power switches. Protective grille, non-tip frame. Power 3 positions Voltage Dimensions LxWxh Weight
93481
76
Spare heating element
93471
Spare set of 3 lamps
800-1600-2400 W 230 V - 10.5 A 365 x 400 x 525 mm 6 Kg Power: Voltage: Dim: Lxwxh
1 lamp 1500W 2 lamps 3000W 220V / 13 A 460 x 460 x 890 mm
SUBFLOOR PREPARATION
AIR TREATMENTS
Air mixing 94404
93495
EX 360 AIR EXTRACTOR
FAN Ø 46 cm
For extraction of fumes, unpleasant odours and non-inflammable gas residues but also for ventilation of tunnels, chambers with underground hatches, drains and cellars. Reversible, can also be used to draw in fresh air or as a fan
Enables air flow circulation towards the dehumidifier and accelerates drying. Protective grille preventing entry of fingers. Power: 185 W. Efficiency: 550 m2. Weight: 2.1 Kg.
Supplied with extraction duct of 10 m length and 300 mm diameter. Steel structure, easy transport using its handle. Protective grille preventing entry of fingers.
93406
Extraction duct
x 30 cm
Power: Voltage: Dims LxwxH Weight Max air flow
10 m
520 W 220 V / 2.3 A 36.5x30x32 cm 14 Kg 3600 m3/h
Thermo-hygrometers
SPECIAL FOR FACADES
93222
93213
LASER CONTACT-FREE THERMOMETER «TL-50»
THERMO-HYGROMETER «BASIC»
For instantaneous temperature measurements using a laser beam and without any contact with the material being measured. Place the device at a maximum of 50 cm from the location to be measured, which is marked by a red luminous point. Push the button briefly and the temperature is displayed on the LCD screen. Temperature measurement range: from -30° to + 380°. Resolution: +/-1°. Dimensions: L x w x th 169 x 90 x 49 mm. Weight: 150 g. Supplied in blister-pack.
RATURE REMOTE TEMPE MEASUREMENT
Indicates: • Air temperature. • Relative humidity. Ideal recommended hygrometry: 50 % for standard quality air. Measuring range: 0 to 55 ° C. 10 to 99 % relative humidity. Supplied with 1 lithium battery. Dimensions: 57 x 53 x 20 mm. Weight: 50 g.
SENSOR WITH SLOTTED COVER
SPECIAL STEEL PROBE HEAD RESISTS BENDING AND IMPACTING
93221
THERMO-HYGROMETER «BC-15»
NE W
. Devices for measuring precisely - relative humidity - temperature in living quarters, offices, storage facilities. Backlight. Short response times. Simple one-hand handling.
!!
TEMPERATURE / RELATIVE HUMIDITY DISPLAY / BACKLIT DISPLAY
Supplied in carrying case with one 9V square battery. Air temperature
Air humidity Use conditions Dimension L x W x H Weight
Measuring range: Resolution Precision Measuring principle Measuring range: Resolution Precision
-20°c +60°c 0.1 °c 2°C Capacitive 0 - 100 % r.h. 0.1 % r.h. 3.5 % r.h. 0°C up to + 50 °C < 80 % r.h., no condensation 34 x 45 x 255 mm 200 g
77
SUBFLOOR PREPARATION
MOISTURE CONTROL MEASUREMENT
Moisture measurement 1- MEASURING BY HYGROMETRIC PROBE
VERY EASY
NEW METHOD DTU 83.2
HOW IT WORKS: 1 Drill Ø 16 mm and 50 mm deep in the support. 2 Insert immediately humidity sleeve and top. 3 24 hours later, take off the top and insert the probe plugged to the Hygromaster, or MMS. If the reading is below 85 %, the support is considered to be dry. HYGROSTICK PROBE
93215
THERMO-HYGROMETER «HYGROMASTER» Before laying covering, this item indicates: • relative humidity rate inside the sleeve - either using the hygrostick probe (supplied) - or using this probe mounted on the H probe extension device (option) fig. a. • room temperature from -10° to + 40°C • surrounding relative humidity rate (20 to 99 %) with the «Hygrostick» probe supplied with the device • temperature of the support on which the floor covering will be laid (surface temperature sensor to be ordered separately) fig. b. Supplied in plastic holster, including 1 Hygrostick probe and 2 LR6 batteries. Dimensions: 18 x 2.8 x 5 cm. Weight: 150 g.
93260
MULTIFUNCTIONAL MEASURING INSTRUMENT »MMS»
3 IN 1
Provides the combined functions of the following devices: • Protimeter Mini 93250, moisture indicator with pins (a) • Surveymaster 93285, moisture indicator with pins and radio frequency (b) • Hygromaster 93215 for ambient temperature measurements and for support temperature measurements (c), as well as for measuring the ambient moisture and the moisture of the support (d). SUITABLE FOR ANHYDROUS SCREEDS
HYGROSTICK PROBE
SUITABLE FOR ANHYDROUS SCREEDS
b: Temperature sensor
a: Pointed probe
b: Radio frequency
c: Temperature sensor
d: H probe
a: Hygrometric probe with extension
93214
«HYGROMASTER» KIT
93218 93219 94194 93217 93216 93209
Set of: • 1 HYGROMASTER 93215 • 1 drill Ø 16mm x 210 mm 94194 • 5 special sleeves • 1 H probe extension device 93217 • 1 User guide
2- MEASURING BY SAMPLING
Pack of 20 special sleaves Pack of 5 special sleeves SDS Plus drills Ø 6 mm x 210 mm H probe extension device Surface temperature captor Hygrostick probe
BALANCE
93265
CCM 2 TESTER KIT
WEIGHING POT
For precise measuring of humidity level. Supplied with plastic case and spring balance, sampling instruments, 4 steel balls, 20 vials with CYLINDRICAL calcium carbide, BRUSH 1 pressure vessel with manometer.
JOINTS
HYDRIDE SUITABLE FOR AN POUNDS LEVELLING COM
93263
RÉCIPIENT
Concrete Anhydrous screeds
78
MAX HUMIDITY RATE 4.50% 0.50%
For more information, see D.T.U. 53.2 - 51.2 - 53.1 - 54.1
HOW IT WORKS: The material to be measured will be sampled (recommendation: min. 50 g). Use the hammer and chisel. The sample will be ground and weighed. The steel balls, the sampled material and a calcium carbide vial will be introduced in the vessel. The vessel will be closed and shaken. The balls will break the vial and the calcium carbide will interact with the water within the sample. After ab. 20 minutes, the dial pointer will indicate the respective pressure. Pressure interpretation. Direct reading. E.g.: if 50 g weighed. The humidity level expressed in percentages will be read directly on the green scale.
HAMMER
CORE OF
Fully equipped with: 1 pointed probe, 1 electrode probe 18 cm, 1 Hygrostick probe, 1 H probe extension device, 1 surface temperature sensor. Supplied in plastic holster, including 2 LR6 batteries. Dimensions: 18 x 7 x 5 cm. Weight: 300 g.
10 water vials CHISEL CALCIUM CARBIDE VIALS
STEEL BALLS
93261
93259
20 calcium carbide vials 100 calcium carbide vials
SUBFLOOR PREPARATION
MOISTURE CONTROL MEASUREMENT
Moisture meters MEASUREMENT IN CONCRETE, PLASTER, LEVELLING COMPOUNDS,
93250
«PROTIMETER MINI» MOISTURE METER
READ COLOURED SCALE Interpretation of the colours
HOW IT WORKS: High performance; all you need to do is to insert the points into the material. A coloured LED indicates instantaneously on the graduated scale if laying is possible.
• Perfect ergonomic shape for better handling • Coloured diode display for easier reading • Skip-proof and shock-proof rubber belt
RED: MOISTURE Laying is not possible YELLOW: LIGHT MOISTURE ALMOST DRY Laying is risky GREEN: DRY Laying is possible
MEASUREMENT IN WOOD READ THE SCALE THAT PROVIDES PERCENTAGE MEASURENTS from 6 to 100 % Admissible humidity
93252
Supplied with alkaline battery 9 V • Protection holster • Extension lead with pins for access to difficult spots • Calibrating plate • 2 spare carbide pins • Automatic correction of measurement when batteries are wearing out. Dimensions: 180 x 49 x 28 mm. Weight: 150 g.
TIMBER SUPPORT: 18 to 22 % OUTDOOR CARPENTRY: 17 to 28 % INDOOR CARPENTRY: 14 % PARQUET: 14 % ARTWORK CARPENTRY: 6 to 12 %
Probe with electrodes
Length: 25 cm. Essential for an in-depth measurement or to probe a wall dissimulated by a double insulator (after drilling of holes for access).
WARNING! Not suitable for anhydrous screeds
93210
93285
«AQUANT» MOISTURE METER
«SURVEYMASTER» MOISTURE METER
Detects moisture up to 2 cm in depth by radio frequency, even through ceramic. Colour scale and digital screen. Supplied with a 9 V battery and protective holster. Not suitable for anhydrous screeds. Dimensions: 175 x 48 x 30 mm. Weight: 135 g.
2 in 1 device detecting moisture below the surface of building materials: 1 • With pins. Similar operation to Protimeter Mini 93250. 2 • With radio frequency. Similar operation to Aquant 93210.
E DOES NOT DAMAG E AC THE SURF
Supplied with a 9 V battery, protective holster, probes of 140 mm, extension lead with pins, calibrating plate, 2 spare pins. Not suitable for anhydrous screeds. Dimensions: 175 x 30 x 48 mm. Weight: 150 g.
93003
«TALKIE 4» MOISTURE METER
«DH» DIGITAL MOISTURE METER Provides an indicative percentage measurement of humidity. The device is placed backwards on the support to be measured. The device is able to detect through radio frequency up to 3 cm in depth, depending on the materials density. Liquid crystal display. Supplied with one 9 V battery and with protective holster. Never use it for anhydrous screeds. Dimensions: 150 x 80 x 30 mm. Weight: 190 g.
BY CONTACT
DETECTS UP TO 4 cm IN DEPTH
NE W
93255
Detects moisture up to 4 cm in depth by dielectric measurement, even through materials. Gives details in «DIGITS», unit calibrated for all materials. !! Audible alarm if digit is exceeded (programmable). Supplied with a 9V battery and protective holster. Dimensions: 195 x 48 x 25 mm. Weight: 150 g.
FOR ALL AGREGATES
Place the device vertically
WET ABOVE: - Wood 50 digits - Plaster - anhydrous screed – concrete screed 80 digits - Levelling compound
79
SUBFLOOR PREPARATION
EXTERNAL THERMAL INSULATION
SLOW SANDER PBV 225 FOR ITE
Special speed. Sanding of polystyrene plates without too much getting in or burning.
NE W
94057
NE W
Polystyrene sanding - Installing 96050
!!
!!
NON ABRASIVE SANDING BLOCK
Very wide injected plastic trowel. The surface of the trowel is perforated and the sanding happens due to the rings on the surface. Dim. 380 x 160 mm
LOW SPEED
NON ABRASIVE
Uses Ø 225 mm auto-grip abrasive discs
Power: Speed: Disc diameter: Weight:
906 W 250 to 350 rpm 225 mm 3.4 KG
Can be connected to a T1 dorsal (see page 74) or VACROM (see page 73) vacuum cleaner
ABRASIVES Ø 225 mm
ROLLING BUCKET CARRIER Fixes onto scaffolding. Allows a bucket of water to be placed and moved easily, due to the wheels on the facing. - Decorator avoids having to go up and down ladders constantly when wetting the walls – no bucket getting in the way on the floor. Supplied without bucket or extension.
Aluminium oxide. Felt back Ref.
95795 95796 95797 95798 95799
NE W
Grit Grit 40 Grit 60 Grit 80 Grit 120 Grit 220
96070
!!
96080
!!
MORE ROLL TRAILS NO ON THE FLOOR
80
RELIEF FOR THE BACK
96060
SWIVELLING SUPPORT PLATFORM
Fixes onto scaffolding. Allows the plasterboard to be placed and kept horizontal whilst it is stuck in place
NE W
Allows the reel to be unrolled on the scaffolding with a minimum of fuss - can be attached to the scaffolding – the cut is guided and carried out with a single cutter. Roll can be changed within 10 s. Max roll width: 1050 m Max diameter 280 mm Weight 6.7 kg
NE W
REEL UNROLLER
!!
SUBFLOOR PREPARATION
EXTERNAL THERMAL INSULATION
NE W
Polystyrene hot wire cutting 96040
!! 96000
STYROM «CORNICHE»
«QUICK CUT» HEAT GUN
Ready to cut in 10 – 20 seconds. Supplied in box with a 170 mm heating blade
NE W
Machine with a heated wire for cutting polystyrene cornices (not for use with polyurethane). Ideal for cutting corners (variable angle cutting guide). Heats up in 2 seconds
24V / 60 W 500° 500 x 300 x 320 mm
NE W
Power: Max. temperature: Dim.:
96020
!!
Power: Max. temperature: Weight: Cable:
96041
Spare wire
INSULATED FOR OUTDOOR USE
!! 96010
STYROM «BEST»
STYROM «BASIC»
Top of the range model. Cuts external thermal insulation boards up to 1.04 m thick. Cuts straight, diagonally or mitre. Supplied in cardbox with transportation wheels to move on scaffolding.
Simpler product than «BEST» to start installing External thermal insulation. Hot ready in 2 sec. Cuts straight, diagonally or mitre. Supplied in cardbox.
24V / 75 W L 1040 mm Th. 330 mm 13.6 KG 1400 x 330 x 180 mm
NE W
Power: Maximum cut : Weight : Dim. :
120W 500°C 1 Kg 5m
!!
96021
Spare wire
Power:
96022
Maximum cut :
Scaffolding fixings
Weight: Dim. :
96023
Carrying Case «BEST» 96024
Wheels for easy rolling
96011
96013
Heated wire
Carrying case
30V/150W W 1060 mm Th. 220 mm 3.7 KG 1420 x 300 x 90 mm
96022
Scaffolding fixings 81
SUBFLOOR PREPARATION
INSTALLATION OF PLASTERBOARDS
Plate lifter Adjustable mast head
95902
RAISE PLATE «ROMUS-PLAC 2«
Allows one person to position plasterboard quickly to the ceiling, alone, within 10 min. 3.20 m Maximum height (without extension): 3.98 m Maximum height (with extension): Min. height: 1.50 m Loading height: 0.84 m Height under reclining: 0.27 m Weight: 32 kg Max. load: 65 kg Wheelbase: 1.15 x 1.17 m
LU S I V
2 BRAKES: MORE SECURITY
E!!
EX C
Easy incline angle adjustment by locking
Telescopic mast with winch, equipped with 2 brakes and anti-return crank
Supplied not assembled, without extension
95903 For ceilings
Extension 50 cm
For sloping axis
3 swivelling wheels with brakes
Cutting rail profiles 95930
93729
CUTTING PLIER
PROFILCUT
To cut the rails profiles of maximum thickness: galvanised steel 1.2 mm, stainless steel 0.6 mm, PVC and aluminium 2 mm. Width: 275 mm. Weight: 460 g.
Guillotine for cutting plasterboard metal profiles (flat, rails, 48 mm profiles, corner profiles, T sustaining profiles). Length: 680 mm. Weight: 5.3 kg. Supplied with support.
FOR PLASTERBOARD METAL PROFILES
95931
Spare blade 6 cutting shapes available BLADE WITHOUT SHARP EDGE
95935
PLIER TO SET
Fast and effective one-hand setting of rails for the installation of the framework of the plasterboard. Length: 275 mm. Weight: 675 g.
82
SUBFLOOR PREPARATION
INSTALLATION OF PLASTERBOARDS
Plasterboard handling 95905
PLATE CONVEYOR 1 person Epoxy painting. Length: 60 cm. Weight: 560 g.
95910
PLATE LEVER
With stirrup to position the plate thanks to its rocking motion. Also used as a door lifter. Width: 300 mm. Weight: 860 g.
95915
PLATE WEDGE WITH LOCK
Allows to lift up, wedge and hold in position the plasterboard during its fixing on the framework. Working alone. Length: 80 cm. Weight: 1.66 Kg.
95925
DUO PLATE CARRIER For max. 2 plasterboards to be carried by 2 persons.
Cutting - Installing 95942
PLUG PLIER To expand standard metal plugs from diam. 4 to 8 mm. Length: 180 mm. Weight: 430 g.
95945
KEYHOLE SAW
To cut easily plasterboards. Sharp point. Length: 290 mm. Blade: 150 mm. Weight: 91 g.
95920
PLATER SPATULA 95940
ANGLE PLATER PLANE 22 AND 45° To chamfer the edges of the plate. Adjustable depth of cutting. Spare long straight blades 92136. Length: 300 mm. Weight: 740 g.
Stainless and extra-flexible 0.45 mm thick blade. Excellent strength with vien of reinforcement. Handle in lime. Width 25 cm.
91195
«HARD CUTTER»
Blade 25 mm (See page 90)
83
BLADES
QUALITY
CONTROLLED OCESS INDUSTRIAL PR
Quality W8 Tungsten+
THERMIC TREATMENTS Tempering carried out in gaseous environment so as to lengthen durability of the blades.
NEW PACKAGING Refined high grade carbon steel with high percentage of tungsten and chromium.
EAR EXCEPTIONAL W RESISTANCE Average cut results:
+ 80% + 65%
CUT
+ 100%
Packaging DISPENSER:
BLISTER:
10 dispensers of 10 blades
1 dispenser of 10 blades 9 mm
18 mm
SHARPENING AND EDGING
Done according to latest technique with specially calculated cutting angles. Strop application for razor-like cutting edge. STRAIGHT
HOOK
Quality X-CUT
CONTROL
Permanent at all production stages with tests carried out in the toughest conditions over periodical samples.
SHARP AND LONGLASTING Refined steel, combination of 1.25 % of carbon with chromium and manganese
Packaging DISPENSER:
10 dispensers of 10 blades
MOLECULAR QUALITY CONTROL
18 mm
9 mm
STRAIGHT
84
LABORATORY CUTTING TEST
HOOK
PACK:
18 dispensers of 50 blades = 900 blades
BLISTER:
1 dispenser of 10 blades
BLADES
Quality
P.84
Knife Blades
P.86
Cutter Blades
P.87
Scraper Blades
P.88
Industrial Blades
P.88
85
BLADES
KNIFE BLADES
Straight blades Straight 50 mm
QUALITY TYPE
Length 50 mm. Thickness 0.65 mm.
100 Blades Safety Dispenser
Card with 10 blades
LONG STRAIGHT 60 mm
Length 60 mm. Thickness 0.65 mm.
QUALITY TYPE 100 Blades Safety Dispenser PACK of 900 blades Card with 10 blades
Thickness 0.65 mm.
QUALITY TYPE 100 Blades Safety Dispenser Dispenser of 900 blades Card with 10 blades
LARGE HOOK
Thickness 0.65 mm.
QUALITY TYPE 100 Blades Safety Dispenser Card with 10 blades
SUPER HOOK
Thickness 0.65 mm.
692126
Thickness 0.65 mm.
QUALITY TYPE 100 Blades Safety Dispenser
QUALITY TYPE 100 Blades Safety Dispenser Card with 10 blades
For high-tech TRIMMER Thickness 0.65 mm
QUALITY TYPE 100 Blades Safety Dispenser Card with 10 blades
86
692129
LONG LIFE
STRAIGHT SPECIAL 60 mm 92136
92139
Length 60 mm. Thickness 0.65 mm.
92132
692136
92216
QUALITY TYPE 100 blades Safety Dispenser
92116
692139
92219
92212
692216
To rediscover
692219
CONCAVE
Thickness 0.65 mm.
92226
92229
692226
692229
92236
92239
QUALITY TYPE 100 Blades 92306 Safety Dispenser Card with 692306 10 blades
super hook TITANIUM
Ice hardened steel titanium coated. 3 times more longlasting. Ideal for natural floorings (sisal, coco).
692239
Card with 10 blades
For carpet & vinyl TRIMMER
92129
Hooked blades
LONG LIFE
Small hook
92126
92406
92409
692406
692409
92416
92419
692416
692419
L SPECIAL FOR SISA S ED RE SEA GRASS
QUALITY TYPE 100 Blades Safety Dispenser
TITANIUM 92250
BLADES
CUTTER BLADES
9 mm Cutter blades Standard 9 mm
LONG LIFE
Width 9 mm. Thickness 0.40 mm. 12 segments.
QUALITY TYPE 100 Blades 92600 Safety Dispenser Card with 692600 10 blades
92609 692609
18 mm Cutter blades Standard 18 mm
LONG LIFE
Width 18 mm. Thickness 0.50 mm. 7 segments.
TAJIMA 18 mm RAZAR BLACK
NE W
QUALITY TYPE 100 Blades 92700 Safety Dispenser Card with 692700 10 blades
92709 692709
!!
QUALITY RAZAR TYPE BLACK Card with 692706 10 blades
• More pointed sharpening angle for a better cutting finish. • Highly alloyed steel, best shelf life. Distributor of 10 blades. • Treatment of dark surface - for a better blade slide, - prevent glue adhesion - avoid oxidization.
18 mm
Width 18 mm. Thickness 0.50 mm. 14 segments. QUALITY TYPE 100 Blades Safety Dispenser
92750
COST EFFECTIVE
THICK 18 mm Width 18 mm. Thickness 0.65 mm. 7 segments.
QUALITY TYPE 100 Blades Safety Dispenser
92720
ICK FOR CUTTING TH COVERINGS
25 mm Cutter blades HARD CUTTER 25 mm
Width 25 mm. Thickness 0.70 mm. 6 segments.
QUALITY TYPE Pack of 5 blades
92809
FOR S PLASTERBOARD
87
BLADES
SCRAPER BLADES - INDUSTRIAL
Scraper blades Pack of 5 blades.
10 blades / dispenser.
FOR SCRAPER - Standard
FOR WINDOW SCRAPERS
Length 102 mm. Width 14 mm. Thickness 0.45 mm.
10 blades carded 100 Blades in Dispenser
92520 1-92520
FOR SCRAPER - Standard heavy duty
Length 102 mm. Width 18 mm. Thickness 0.65 mm.
Length 102 mm. Width 18 mm. Thickness 0.30 mm. 10 blades carded
FOR «BIG-SCRAPER»
10 blades carded 100 Blades in Dispenser
92560
Length 127 mm. Width 19 mm. Thickness 0.90 mm.
Length 102 mm. Width 14 mm. Thickness 0.45 mm.
FOR SCRAPER - with notches
10 blades carded 100 Blades in Dispenser
10 blades carded 100 Blades in Dispenser
Length 100 mm. Width 14 mm. Thickness 0.45 mm.
5 blades carded
92540
5 blades carded
92530
1-92560
FOR «MEGA SCRAPERS»
FOR SCRAPER - Rounded angles
92525
92515
Length 200 mm. Width 19 mm. Thickness 0.90 mm.
1-92515
92510 1-92510
FOR «SCRAP LACANET»
Length 150 mm. Width 18 mm. Thickness 1 mm.
Loose packed 10 blades 92554 carded
Safety industrial blades SQUARE ENDED RAZOR BLADES
single edge
Length 38 mm.
THICKNESS 100 per box
THIN
THICK
0.15 mm
0.30 mm
88
QUALITY 10 blades per pack
92000
50 per box
92010
50 per blister
692010
TRAPEZE Patented model
Length 38 mm. Thickness 0.30 mm.
Length 39 mm. Thickness 0.30 mm.
STRAIGHT SECURITY 70 mm
REF
92507
For 691045 safety knife
Length 70 mm. Thickness 0.50 mm. QUALITY 50 blades per pack
REF
92020
QUALITY TYPE Blister card 692050 (10 blades)
FLOORING TOOLS
Cutting cutter
P.90
Measuring - Scribing
P.98
Stapling
P.103
Adhesive Tapes and Tools
P.104
Smoothing - Pressing : Wall and Floor P.108 Handling
P.110
Personal Protection Equipment
P.112
Power Tools
P.114
Maintenance
P.118
89
FLOORING TOOLS
CUTTING
Autolock cutters AB - 18 mm
AB - 9 mm
Autolock cutter. Supplied with 2 extra quality spare blades in the handle. Blades snapper cap.
91075
Autolock cutter. Supplied with 2 extra quality spare blades in the handle. Blades snapper cap.
91185
HEAVY DUTY LOCKING SYSTEM.
Blister card
Blister card
18 mm «Classic» cutters AB METAL - 18 mm
RP 3000 - 18 mm
Autolock. Blades snapper cap. Supplied with 2 extra quality spare blades in the handle.
Autolock professional cutter in zinc alloy. Blades snapper cap. Supplied with 1 blade in handle.
BEST SELLER
91180
691180
Blister card
91280
Supplied loose
Blister card
25 mm Cutters 91195
«HARD CUTTER»
Locking system by turning the knurl. Length: 170 mm. Spare blades 92809 to be ordered separately. Supplied in blister card.
90
FOR S PLASTERBOARD
FLOORING TOOLS
CUTTING
9 mm «TAJIMA» cutters HEAVY DUTY CUTTERS 91060
91090
LC - 303
LC - 301
Universal cutter. Supplied with 2 spare blades in the handle. Blades snapper cap. Supplied in blister card.
Extra flat stainless steel cutter. Blades snapper cap. Supplied in blister card with 1 mounted blade.
EXTRA FLAT
18 mm «TAJIMA» cutters HEAVY DUTY CUTTERS
UP TO 25 KG PRESSURE
91190
91200
LC - 521
LC - 520
Strong blocking system by turning the knurl. Supplied with 2 spare blades in the handle. Supplied in blister card.
Double blocking system. Heavy duty purpose. Supplied with 2 spare blades in the handle. Supplied in blister card.
91285
91275
AC - 521
AC - 520
Strong blocking system by turning the knurl. Supplied in blister card.
Autolock. Supplied in blister card.
Screw driver
Opening painting pots
- WITH FIN DY - ALUMINIUM BO
Marking
91
FLOORING TOOLS
CUTTING
Automatic cutters AUTOMATIC BLADE CHANGING
A metal blades loading magazine is located inside the cutters body. This may hold 5 to 6 blades.
the worn out blade 1 Take from the front end of
the cursor all the way 2 Pull back to retrieve a new
the cutter.
the cursor and the new 3 Push blade is ready.
blade.
91220
91210
L 2000 P - 18 mm
A 1000 R - 9 mm
Autolock cutter. Aluminium body. Blades snapper cap. Supplied in blister card with 9 mm spare blades in the cartridge.
Locking system by turning the knurl. Blade s snapper supplied separetely. Supplied in blister card with 3 (18 mm) spare blades in the dispenser.
ALUMINIUM BODY
TAJIMA cutters with loader 91265
ACM-500 - 18 mm
Polished aluminium handle with elastomer anti-slip grip. Autolock. Supplied in blister card.
the nicest, the new trend
91255
Supplied with 5 blades in the cartridge.
LCM-500 - 18 mm Aluminium handle moulded with anti-slip elastomer. Shockproof and autolock. Supplied in blister card.
«Kicoupp» KICOUPP
Registered design. Made of fine polished aluminium. Supplied without blade. Uses blades 92000, 92010 and 92020.
691000
Blister card 91000
Supplied loose
92
691030
«KICOUPP» WITH PROTECTED SOLE To cut coverings without damaging the support. Increases blades life. Supplied without blade in blister card. Uses blades 92040 and 92010.
FLOORING TOOLS
CUTTING
Trimmers 91410
HIGH-TECH TRIMMER Patented model. Ideal tool for perfect and quick trimming of all kinds of floor coverings. The double adjustment of the cutter is achieved thanks to the double knurled knob: 1 - blades extraction, 2 - required tilt. It enables you to trim in both directions assuring a perfect cutting joint.
THICK FLOOR COVERING
INCLINE ANGLE ADJUSTMENT
OR THE THINER FLO E MORE TH COVERING IS TO BE E THE STOPS HAV INVERSELY EXTRACTED AND Angle adjustment by tilting, as shown on the pictures. As shown on the drawings, small angle «A» is required for a perfect cut of a thick floor covering and larger angle «B» is required for a thin one. Spare blades page 86. Supplied with 2 non mounted blades, in blister pack. 100 Spare blades : Ref 92416
BLADES IN - OUT
THIN FLOOR COVERING
91400
CARPET & VINYL TRIMMER
Registered design. To easily trim thin floor covering. Spare blades page 86. Supplied with 2 non mounted blades, in blister card. 100 Spare blades : Ref 92416
Tile cutters TILE CUTTER For rigid and soft PVC tiles, linoleum, rubber, etc. Aluminium structure.
93420
30 cm
Cutting width: 30 cm.
93426
61 cm
Cutting width: 61 cm.
93422
30 cm Spare base blade 93421
30 cm Spare upper blade
93428
61 cm Spare base blade 93427
61 cm Spare upper blade 93
FLOORING TOOLS
CUTTING
Knives PAINTED KNIFE
RETRACTABLE KNIFE
Injected aluminium. 4 cutting positions. Supplied assembled with 1 straight blade.
Red paint finish. Supplied without blade.
Made in zamak injected under pressure. High precision blades holding device with safety studs.
691101
Blister card
91101
691130
Blister card
Supplied loose
POLISHED KNIFE
91130
Supplied loose
91645
Shiny finish. Supplied without blade.
LINOLEUM KNIFE
Made of chromium-stainless steel. Ergonomic elastomer handle. Length: 22 cm.
691102
Blister card
91102
Supplied loose
91155
LONG KNIFE For cutting strips in standing position before floor covering removal with a stripper. Length: 1.30 m. Uses straight interchangeable blades 92116 and hooked trimmer blades 92400 and 92410.
Safety knives PLASTIC SAFETY RETRACTABLE KNIFE
Plastic handle, stainless steel body. Supplied with one extra quality mounted blade. Spare blades: 692050.
691045
Blister card
SAFETY RETRACTABLE KNIFE
Made of zamak, painted black. Supplied with a mounted long straight blade. Spare blades 92136 and 92139.
691140
Blister card 91140
94
Supplied loose
Automatic retractable blade device avoiding cutting risks when blade slips.
91035
Kit «Safety cut»
Includes: • 1 PVC safety knife 91045 • 1 metal safety knife 91140 • 50 blades 692050 • 50 long straight blades 92136 • 1 anticut glove 94896
FLOORING TOOLS
CUTTING
Automatic knives LADES CHANGE YOUR B NDS WITHIN 4 SECO
91115
«TAUREX®» KNIFE
• Body made of zamak. Rounded form and polymer grip making it extremely comfortable to use. Can withstand up to 60 000 openings. • Just turn rear segment clockwise, access to magnetic lug is made possible. Once the new blade has been replaced, close and lock the knife. The «TAUREX» knife is ready for use. • The blade can be changed or turned within PATENTED 4 seconds. • Locking pressure prevents any movement of the blade.
LOCKING PISTON OPENING
MAGNETIC LUG SECURING THE BLADE
91120
SPARE BLADES IN THE HOLSTER
NONSLIP GRIP
Spare Taurex Holster
91150
EASY OPENING
GENUINE DELPHIN KNIFE Made of cast aluminium. Supplied in blister. Fast opening.
KNURL
81150 Supplied loose 91146
91145
«Sprinter» strip cutter
Strip cutter for «Delphin»
Delphin knife blocking system mounted on a 1.50 m long handle. Ideal for standing working position. Supplied without knife.
Holster
Rigid PVC. For cutting strips from 30 to 100 mm large. Supplied without knife. To cut strips on the floor before using a stripping machine.
Specific knives 91653
91655
91650
CIRCULAR CUTTER
LOOP PILE CUTTER
CARPET KNIFE
Diameter from 4 to 16 cm. Supplied with 2 blades. For repairing burnt or worn areas.
For foam backed floor coverings. Supplied with 10 blades 92105.
For tufted carpets. Supplied with 10 blades 92040.
91652
92105
92040
Spare blades
Spare blades
Spare blades.
Pack of 2.
Pack of 10.
Pack of 10.
95
FLOORING TOOLS
CUTTING
CONVEX RULERS
Supplied without box. Thickness 0.5 cm.
NE W
Rulers LENGTH
Width 10 cm tempered steel
2.05 m* 4.05 m*
91525 91526
!! new width Width 8 cm STAINLESS STEEL
LENGTH
91536 91537 91538 Set of 1 x 0.60 m, 1 x 2.10 91539 0.60 m 1m 2.10 m
* Straight ends
m, 1 box
91500
Metal box
91571
Diam 20 cm
«T» SQUARE CONVEX STEEL RULER
For 90° storing and cut.
91512
FLAT RULER 10 cm
NE W
Tempered steel. Width 10 cm. Length 2.05 m.
Spring loaded stainless steel convex ruler of 4.05 m (Width 8 cm) + T-square 60 cm (Width 40 x 6 mm).
!!
91540
new width
STAINLESS STEEL CONVEX RULER WITH HANDLE
Stainless steel. Section: 70 x 0.5 mm. Length: 60 cm.
91580
HIGH-GRADE STEEL RULER
To guide the grooving tool when making grooves for PVC hot welding. Thickness: 4.00 mm. Dimensions: 800 x 60 x 4 mm. Raw alu.
91550
ADJUSTABLE STRAIGHT RULER WITH HANDLE
Extendible from 0.63 -> 1 m. Stainless steel. Width: 70 x 0.5 mm.
91590
BEVELLED RULER For smoothing fibre glass and other coverings, even in angles. Made of aluminium with handle. Length: 1.00 m. Width: 10 cm. Thickness: 1.8 cm.
91560
LEVEL RULER WITH HANDLE Stainless steel ruler. Section: 90 x 0.5 mm. Length: 2 m. Weight: 2.420 kg.
Can be used: - as plumb line - making perfect vertical joints - for horizontal cut.
93240
STAIR BEVEL
Enables you to template stairs easily and with a high precision. 2 legs of 60 cm, 2 of 80 cm and 2 of 100 cm slide around the axle fixed on the support-plate. The locking of the legs occur thanks to a milled knob. Supplied in case.
96
93325
GIANT SQUARE To cut glass. Stratified material. Heel: thickness 11 mm. Length: 360 mm. Ruler: thickness 4 mm. Length: 860 mm. Weight: 710 g.
FLOORING TOOLS
CUTTING
Shears for flooring C
SUPPLIED IN PV SHEATHS
93870
NAPPING SHEARS To cut off excess fibres. Length: 150 mm.
CARPET SHEARS High quality steel. Polished and chromium plated. «Nogent» quality. First quality product.
91320
Right handed
Length: 26 cm.
91350
OFFSET HANDLE SHEARS Suitable for cutting natural floor coverings. High grade steel. Polished and chromium plated. Length: 25 cm.
BENTHANDLE SHEARS Lacquered blades, chromium plated nib.
91340
Right handed
91395
Length: 28 cm.
THICK BLADES Stainless steel blades. Plastic rings. Length: 23 cm.
Shears for wallcovering 91365
91380
«TEFLON» SHEARS
STAINLESS STEEL SHEARS
Pointed tip. Highly glue resistant isolated rings. Length: 29 cm.
Stainless steel blades. Plastic rings. Length: 26 cm.
91370
PLURICOUP Polished stainless steel teeth blades 42 mm. Ergonomic handle. Length 165 mm. For cutting PVC profiles, underlay, cables diam. max. 10 mm...
multipurpose
91385
CONCAVE SHEARS
Stainless steel blades. Plastic rings. Length: 27 cm. Higher sharpness.
97
FLOORING TOOLS
MEASURING
Measuring tapes MAGNETIC ECO MEASURING TAPES
MAGNETIC
Unbreakable ABS body with rubber protections, locking system, holding clip and automatic return with brake. Yellow plated steel tape.
93291
93290
3 m x 16 mm Retract button
2 MAGNETS
Blister
93292
5 m x 25 mm
8 m x 25 mm
Blister
Blister
93293
10 m x 25 mm Blister
NE W
«TAJIMA» measuring tapes !! 93274
«G-LOCK» MEASURING TAPE
«G-5.0» MEASURING TAPE 5 m x 25 mm supplied on blister card
- Shock resistant measures - Hook with 3 rivets - Shock absorbent system - Heavy duty box
93283
Tape with hypercoat protective cover - no shiny reflection - better visibility - better durability
5 m x 25 mm On blister card
93284
8 m x 25 mm
Shockproof housing
On blister card
HIGH QUALITY
Shock absorbing system for the hook which absorbs some of the shock while rewinding
2 times stronger end hook
Miscellaneous Tapes 93224
93223
CRACK METER
SLOPE LEVEL
For determining the angle of slope of a floor or pitched ceiling. Dim: 250 x 125 mm. Weight: 395 g. Incline degree thumbwheel
Transparent instrument used to measure decreases or increases in crack sizes. Measurements made on flat surfaces. Dim. 128 x 31 x 2 mm
Magnetic aluminium square
BUBBLE LEVEL
98
Place the level on the surface whose Turn the thumbwheel until the bubble is in the centre of the oil incline angle is to be measured then read the incline degree
FLOORING TOOLS
MEASURING
NE W
Laser meter !!
• QUICK • SIMPLE • ACCURATE
Measurement type
93200
LASERMETER «TAJIMA F03» - Range up to 30 m – Measures distance, surface, volume - Continuous measurement - Measure of façade height (Pythagoras) - Addition /Subtraction of values - Permanent viewfinder
Measures from the front or the rear base. 2 line DIGITAL SCREEN: the last measure and result (eg. surface.)
Supplied in blister card
ADDITION / SUBTRACTION OF DIFFERENT MEASURES
COMFORTABLE RUBBER GRIP TO ENSURE A FIRM HOLD
RANGE UP TO 30 m
Simple or continuous measurement
Supplied in holster with belt holder and 2 batteries AAA
Sélection mesure à partir de l’avant ou de l’arrière de l’appareil
Selection: measure, surface, volume
Distance Measuring accuracy Smallest unit of measure Operating temperature Stocking temperature Laser class Laser type Batteries
30 m +- 15 mm to 3 mm 1 mm -10°C to 50°C -20°C to 70°C
Automatic stop after approx.
Pythagoras selection. Measuring height from a distant point (e.g. façade) measures 1 and 2 calculate the height A to B
Weight Dimensions
635 mm, 2 x 1,5V LR03 (AAA) 20 seconds (laser) 5 minutes (device) 0.175 kg 120 x 50 x 20 mm
Miscellaneous measuring 93245
93239
E
FOR CONDUCTIV FLOORS
3-in-1 DETECTOR
FLOOR RESISTIVITY METER
For detecting and identifying: • wood • metal (heated floors, metal structures etc.) • Electrical wiring (live cables). Dim.: 170 x 70 x 25 mm. Weight: 200 g. Graphic display and audible alarm for accurate location. Automatic calibration. Detection up to depth of 40 cm.
Used for testing the resistivity of conductive floor coverings (e.g. in clean rooms); that is, the ability of the floor to dissipate electrostatic charge. All measurements are made after the copper strip is fitted and adhesion of floor covering is complete.
Very simple to use. Place vertically on the floor. Press the central button and read the measurement on the diode, which must generally be less than or equal to 10 degrees (please refer to the flooring manufacturers data). Dim. 6 x 3.5 x 10 cm Weight 113 g Supplied with a 9V battery Carrying holster
99
FLOORING TOOLS
MEASURING - SCRIBING
Rotating lasers 93207
AUTO-LEVELLING LASER HV101 Fully automatic self-levelling in horizontal and vertical, visible beam. Sloping axis on manual mode, for the ceiling applications use the wall support to fix on the ceiling profile. The laser can be fixed on the tripod vertically and horizontally, for controlling plumb up and down of wall partitions. Designed for rugged performance, on site (rubber belt).
Laser: Accuracy: Range: Speed: Operating temperature: Dim LxWxH: Weight
Wall base
REMOTE CONTROL
Supplied in plastic case including: goggles, magnet target, metal wall support, receiver, remote contro, and 4 rechargeable batteries.
± 3 mm at 30 m 30 m / 300 m with receptor Rotation 50/200/600 rpm -5 ° -> 45 °C 216 x 171 x 152 mm 1.5 kg
RECEIVER
Laser accessories ALUMINIUM TRIPODS - Thread 5/8“ 93181
93268
3.50 m
93183
2.00 m
Tripod with retractable handle. Sliding distance gauge. Integrated level.
SHIFT FOR TRIPOD 3.40 m To be fixed into the tripod, for better stability
Hand-operated tripod.
Minimum height: 105 cm. Weight: 4 kg. Minimum height: 1.30 m. Weight: 7.35 kg.
93197 93202
Laser goggles
100
SHIFT 3.40 m LASER SUPPORT To be installed between ceiling and floor. The sliding support allows positioning laser at any height. Made of 5 metal elements. Threading 5/8“. Supplied in holster.
FLOORING TOOLS
MEASURING - SCRIBING
Horizontal - vertical lines IF ASHING ALARM AUDIBLE AND FL HORIZONTAL OT THE DEVICE IS N
93185
«GIZMO 3» LASER VISION +
NE W
Indoor self-levelling laser using magnetic field compensator. It generates 1 horizontal beam and 1 vertical beam (90°). Supplied complete with protection bag, support, batteries (15 hours operating time), laser goggles and magnetic target.
!!
93186
GIZMO 3 - KIT no. 1 Set including: - 1 Gizmo 3 93185 - 1 tripod 3.50 m 93181 - laser goggles
POWERFUL BEAM
93187
GIZMO 3 - KIT no. 2
Set including: - 1 Gizmo 3 93185 - 1 shift 3.40 m. 93197 - laser goggles
Minimum horizontal line height: 7 cm if placed on floor
93184
KIT 3 - GIZMO 3 Automatic compensation range Accuracy Max range Laser / Class Weight
Includes: - 1 Gizmo 3 93185 - 1 support 3.40 m 93183 - laser goggles
+/- 3.5° +/- 3 mm at 10m +/- 20 m* 635 nm / R 860 g
* depending on luminosity
SQUARE LASER
FOR FLOORS
Projects 2 visible perfectly square (at 90 degrees) laser beams on the floor. Ideal for carpet tiles, ceramic tiles etc. Includes 2 bubble levels and main angles graduation.
93176
SELF-LEVELLING GREEN «V-LINER» LASER
UNEQUAL LUMINOSITY
Indoor self-levelling laser using magnetic field compensator. One vertical beam of unequal luminosity, much more powerful than the red one. Possibility of blockage of self-levelling to make slanting beams by tilting the device. Supplied in complete set with 3 batteries AA 1.5 V
Spirit level Packaging spacer Accuracy +/- 3 mm at 10 m Range 10 m* Supplied in protective pack with two 1.5 V 635 nm / 2 batteries and magnetic target. Laser / Class
Automatic compensation range Accuracy Range Fan angle Laser / Class
NE W
93188
!!
+- 5° +/- 3 mm at 10 m 20 m 140° 532 nm / 3R
* depending on luminosity
101
FLOORING TOOLS
MEASURING - SCRIBING
Manual tracing 95440
95430
«MOLOSS» SKIRTING TRIMMER
HEIGHT MARKING TOOL
For easy scribing and trimming at the required height when coving the vinyl on the wall. Adjustment each cm between 7 and 13 cm.
93311
CHALK LINE 30 m In cast aluminium. Retractable crank with blocking device allowing use as plumb line.
For drawing along the wall using a pencil (not included). Ideal for coving PVC or linoleum or installing skirtings or edge profiles. Length: 21 cm. Maximum height of drawing: 20 cm.
MARKING POWDER
Soft plastic, with pouring tip. Contains 100 g.
93391
PENCIL
93315
Length: 250 mm. Section: 12 x 7 mm.
Blue 93317
Yellow
Specially designed for wall coverings.
93240
93242
STAIR BEVEL Enables you to template stairs easily and with a high precision. 2 legs of 60 cm, 2 of 80 cm and 2 of 100 cm slide around the axle fixed on the support-plate. The locking of the legs occur thanks to a milled knob. Supplied in case.
NE W
TEMPLATE FOR STAIR-NOSINGS Extendible. Ideal for making and reporting templates of stairs on stair-nosings to be cut to measure.
!!
Min 720 mm. Max 1300 mm. Max with extension 1750 mm.
93227
DOUBLE SQUARE FORMER SET
Fitted with metal needles. Supplied in plastic case containing 2 former sets of 20 cm each. Can also be fitted into each other to make a 40 cm former set or can be linked up with an adjustable angles former supplied, enabling you to position the former set to the required shape to be cut.
93366
DOUBLE SUCTION LIFTER DISCS Glass lifter, plastic lifter. Suction lifting force: 60 kg.
93226
METAL FORMER SET Fitted with metal needles. Length: 15 cm. Supplied in blister card.
93325
GIANT SQUARE To cut glass. Stratified material. Heel: thickness 11 mm. Length: 360 mm. Ruler: thickness 4 mm. Length: 860 mm. Weight: 710 g.
102
FLOORING TOOLS
STAPLING
Manual 90965
«MULTITAK» STAPLER 3 FUNCTIONS
90902
UNIVERSAL STAPLER
Robust plastic body. For staples, nails and cable staples. Adjustable hit power.
Metal body. Very powerful. Adjustable penetration depth. Special nozzle to work in angles. Fires staples and head nails.
STAPLES TYPE «53»
90126
90129
STAPLES TYPE «53» 8 mm
90131 10 mm 90133 12 mm
6 mm
90134 14 mm
90129
8 mm
90136 16 mm
90131
10 mm
90133
12 mm
90134
14 mm
5000 TH TIPS
90915 15 mm
15 mm
1700
4000
CABLE STAPLES
TH NAILS
90915
5000
90142 90144
12 mm 14 mm
90977
STAPLING HAMMER Staples
NE W
90978
90001
STAPLE REMOVER
!!
Long lever arm.
10 mm / 5000 pces.
Electrical 90235
STAPLES TYPE «53»
ELECTRIC NAILER «LKT 53»
90129
8 mm
90131 10 mm
For staples and TH nails. Elongated nozzle for angles. • Voltage: 220 V. • Power: 2300 W / 10 A. • Weight: 1.4 kg. Cable: 3.50 m. Supplied in cardbox. 30 hits /min.
90133 12 mm
5000
90134 14 mm 90139 18 mm
3000
TH NAILS
90919 20 mm
1500
Various staples for STANDARD NOZZLE STAPLER 90500
STAPLES TYPE «80»
90505 4 mm 20 000 90507 6 mm 20 000 90508 8 mm 10 000
for STAPLER FOR PLYWOOD
for NAILERS FOR BRADS 90601
90550
For needles from 10 to 12 mm
STAPLES TYPE «90»
90565 15 mm
5000
90572 20 mm
6000
90580 30 mm
5000
90600
For needles from 15 to 17 mm NEEDLES TYPE «MINI 6»
90620 10 mm 20 000
90510 10 mm 10 000
90622 12 mm 20 000
90512 12 mm 10 000
90625 15 mm 20 000
90514 14 mm 10 000
90627 17 mm 20 000
for ELECTRIC NAILER «MET 32» COMBI 90250 NARROW STAPLES TYPE «4»
90217 18 mm
5000
90228 30 mm
2200
103
FLOORING TOOLS
ADHESIVE TAPES - GLUEING
Masking - Packing POLYPROPYLENE MASKING TAPE
SMOOTH MASKING TAPE
To mask doors, windows, walls, etc.… before paint application or spraying. Static plastic film trim with a smooth adhesive masking tape of 15 mm. Supplied without reel.
Quality 80°. Solvent-based adhesive.
DIMENSIONS
98390
DIMENSIONS
550 mm x 33 m
98325 25 mm x 50 m
98396 1400 mm x 33 m
98350 50 mm x 50 m
98150
PACKING TAPE
93070
Polypropylene 36 microns. Dimensions: 50 mm x 100 m.
98165
REEL GUN
WRAPPING FILM
Dimensions : 100 mm x 150 m. To keep carpets, mats rolled without damaging the textile fibres. Supplied without reel.
98151
PACKING TAPE
branded with ROMUS logo
98162
SILENT
Reel
CONDUCTIVE COPPER TAPE
93239
98170
FLOOR RESISTIVITY METER
For easier dissipation of electrostatic charge in floor coverings.
ORANGE ADHESIVE TAPE
98290
Non adhesive
Roll of 50 m x 10 mm.
A
For floor marking or to facilitate item location. Dimensions: 33 m x 50 mm.
98292
DV
ICE
Adhesive
Set of 2 rolls of 20 m x 8 mm (40m).
the For checking resistivity of ors conductive flo 99 ge see pa
Luminescent safety indicator Autonomous persistent photoluminescent luminous indication system intended to facilitate a safe and fast evacuation of buildings in case of blackouts. Designed for public buildings, industrial areas, offices, production facilities, fire escapes, passages, garages, parking lots etc. Photo-luminescent bands or plates are photo sensitive to light and «recharge» within 15 minutes under normal lighting conditions (minimum 50 lux at the location where the plate or the band is to be mounted). Under such circumstances, the luminous indication effect lasts at least 10 hours.
104
PHOTOLUMINESCENT STRIPS
SPECIFIED FOR S. EMERGENCY EXIT COMPLIES WITH -080 STANDARD X08 E ROUTES CLASS C ESCAP For stair-nosings, floors, door frames, wall frames WIDTH
LONGUEUR 10 m
19 mm
4260
25 mm
4261
50 mm
6982
Nonslip insert on stair-nosing (See page 34)
FLOORING TOOLS
ADHESIVE - TAPES
Double sided tapes DOUBLE FACE ADHESIVE TAPE
Polypropylene DIMENSIONS
98000
50 mm x 5 m
98020 50 mm x 25 m 98040 100 mm x 25 m
CONTACT TAPE Standard
To stick skirting, carpets or soft PVC.
98220
50 mm x 50 m 98230
Cloth DIMENSIONS
98050
glueing • Super-fast ue residues gl no t, • Nea and odourless • Solvent freeer migration iz tic as pl • No y out • Does not dr
50 mm x 5 m
98070 50 mm x 25 m 98090 100 mm x 25 m
85 mm x 50 m
EN
REPLACES NEOPR ADHESIVE!
Heavy duty To stick rigid PVC skirtings or protection mats.
98260
98111
35 mm x 50 m
AUTO-GRIP ADHESIVE TAPE
98105
For fixing felt back carpet. Dimensions: 25 m x 50 mm.
FOR EXHIBITIONS
Facilitates carpet removal, avoids glue residue. Dimensions: 25 mm x 50 m.
Various adhesives 93010
93020
POLYESTER CONTACT ADHESIVE
MS POLYMER SEALANT-ADHESIVE
Doughy homogeneous mixture, fast drying, suitable for vertical application. Recommended for fixing metal or wooden tackless strips, fitted carpets, stair-nosings, wall drape profiles… Supplied in 500 ml can with hardener tube (+ - 1 m2 / can).
To stick all types of aluminium, semi-rigid PVC, stainless steel, brass and wood profiles, whatever the support is, even porous (concrete, plaster), even outdoors. No solvent emanation. Supported temperature - 40° à +90°. Fitting temperature: +1° to 30°. Grey colour. 290 ml cartridge. For 10 to 12 m (Ø 5 mm).
CYANOACRYLATE ADHESIVE For instant fixing of carborundum and rubber inserts on metal stair-nosings. Dry and grips within 20 seconds. 20 g. tube.
93014
PRIMER «GRIP» 0.9 L
To be applied before installing adhesive profiles with Butyl, such as corner profiles or stair-nosings.
NE W
93015
!!
93018
ANTI-FRAYING SPRAY To prevent textile fibres from separating when cutting fabrics or carpets. Rapid drying. Capacity 250 ml. Transparent.
105
FLOORING TOOLS
ADHESIVE - TOOLS
Tools 93058 NE W
CORDLESS CARTRIDGE GUN - 7.4 V BATTERY
For 310 ml cartridges and 400 ml packs. Supplied in a PVC case with 1 battery 7.4 V and one charger.
GLUE SYRINGES
!!
Used for glue injection.
Glueing area lighting
93059
Spare Battery Recess anti-leak system Voltage Dimensions (mm) Weight (Kg) Max strength (daN) Speed unladen (mm/min) Battery Battery consumption Full charge time
Disposable
Switch with variable speed
Contains 50 ml. Supplied with one Ø 2 mm needle. Skin-packed.
7.4 a 380x225x70 1.35 7.4 V Li-ion 20 cartridges 2 hours
Card of 3 spare needles
96913
Ø 2 mm Ø 2.5 mm
Polyamide
Contains 50 ml. Supplied with 3 assorted stainless steel needles. Skin-packed.
93052
96916 96917
96914 7.4 V Li-ion battery
For 96914.
96918
Ø 3 mm
93050
«Tajima» cartridge gun
MANUAL CARTRIDGE GUN
For 310 ml cartridges.
For 310 ml cartridges.
Recess anti-leak system
95720
Mini mixing trolley ITOOLS
I.TOOLS adhesive spatula
For applying adhesive, levelling compounds... Easy and effortless spreading (blocking and break system). Supplied with a bucket 30 L.
28 mm spare teeth blades to be ordered separately. See page 107, 94898 to 94909.
95715
Without handle
95721
Spare bucket 30 L.
95716
With handle ADVICE TKB teeth
Covering type
A1
Wall fabrics Fiberglass cloth Sponge coating Smooth foam PVC Homogeneous PVC Mineral tiles Plastic flooring Fabric - Wrong side smooth PVC PVC on PVC Integral steps Conductor PVC flooring
A2
Former no. 2
A3 A4 S1 106
HOW TO CHOSE YOUR ADHESIVE SPATULA : Qty of adhesive
TKB teeth
200 to 250 g/m2
B1
250 to 300 g/m2
Former no. 1
200 to 250 g/m2
B2
150 to 200 g/m2
B3 B12
Covering type Needle-punched Non woven carpets Action Bac carpet Relief foam PVC Linoleum Underlays Plug-in tiles Natural fibres wrong side latex Hard parquets Parquets
Qty of adhesive
300 to 350 g/m2
350 to 450 g/m2 500 to 600 g/m2 800 to 1000 g/m2
FLOORING TOOLS
ADHESIVE - TOOLS
Adhesive spreaders
T GENUINE CARPE : LAYER SPATULA H=15 cm
NEW EUROPEAN D T.K.B. STANDAR TEETH
15 cm
BLUE STEEL
ERGOROM
Wooden handle. Longlasting flexible blue steel blade, negligible use of teeth. Th. 0.6 mm
TKB TEETH
93040 To renew spreader teeth as required.
A2 B1 B2
94968
RUBBER SPREADER
B3
For primer, neoprene adhesive, ceramic tiles mortars...
LENGTH 180 mm 250 mm 180 mm 250 mm 180 mm 250 mm 180 mm 250 mm 180 mm 250 mm
A1
RE-NOTCHING TOOL
B12
User friendly PVC handle. Longlasting flexible blue steel blade, negligible use of teeth. Th. 0.6 mm
STEEL
93088 93089 93080 93081 93082 93083 93084 93085 93086 93087
BLUE
ERGOROM NE W
Wooden handle. Cold worked steel blade. Th. 0.6 mm.
250 mm 93079
!!
93028
93095
93032
93096
NE W
STEEL
!!
Spreaders with inserts SPARE BLADES
94888
Price per blade. 10 pcs / dispenser.
«aluquick» master spatula
Aluminium handle. Ergonomic shape. Width 28 cm. Supplied without blade.
ergonomic
TKB TEETH
SPREADER HANDLE
Wooden handle. Steel master blade.
WIDTH 210 mm 280 mm
A1
94897 94898
A2
94899 94900
A3
94901 94902
A4
94903 94904
S1
94891 94892
B1
94905 94906
B2
94907 94908
B3
94893 94909
Spare blade
Length 21 cm
94894
Length 28 cm
94895
107
FLOORING TOOLS
WALL SMOOTHING
Rollers 93105
93108
BEIGE PLASTIC SMOOTHER
TRANSPARENT PLASTIC SMOOTHER
Made in ABS, beige. Resistant. Length: 260 mm.
Made in transparent polypropylene. Length: 260 mm.
93150
STAINLESS STEEL SMOOTHER
For intensive smoothing of wall coverings. Wooden handle. Large stainless steel blade. Length: 340 mm.
Rigid spreaders 93100
93101
TRANSPARENT SPREADER
RIGID SPREADER
Length: 245 mm.
Resistant polystyrene. Rounded ending on one side to smooth and straight on the other side to be used as ruler. Length: 250 mm.
RIGID!
Smoothing rollers 93135
INTERNAL ANGLE ROLLER For «breaking» and smoothing the wall covering in internal angles.
95137
93138
PRESSURE ROLLER
DOUBLE ANGLE ROLLER
Made of rubber. Width: 40 mm. For PVC wall covering joints.
For smoothing internal and external angles. Wooden handle.
FOR GLASS CLOTH
108
FLOORING TOOLS
FLOOR SMOOTHING
Rollers LINOLEUM ROLLERS
Fitted with 2 transport wheels to facilitate transport. Zinc plated. Protected against rust.
EASY TRANSPORT
ON WHEELS! Exclusive fitting device of the handle into the stirrup enabling two people to carry easily.
Easy handle locking system.
93161
35 KG
Total width: 37 cm. 3 sections.
93165
CORK BROOM To smooth PVC and linoleum floor coverings without marking surface. To be used before using the linoleum roller. Cork plate with rounded angles. Length: 1.30 m. Width: 40 cm. Weight: 3 Kg.
93166
Replacement cork plate
93160
50 KG
Total width: Âą 52 cm. 4 sections.
93155
LIGHT WEIGHT RUBBER ROLLER To smooth all kinds of floors. Allows to smooth with the body weight (pressure from 8 to 80 kg). Total width: 45 cm. Weight: 5 kg.
93164
75 KG
Total width: 38 cm. 3 sections. Diameter: 180 mm.
93145
CORK PRESS To smooth PVC and linoleum floor coverings without marking surface. Dimensions: 300 x 120 x 25 mm.
93170
STEEL ROLLER
For butt joints of floor coverings. Does not damage the material, even fragile. Especially adapted to be used alongside skirtings. Width: 50 mm. Weight: 1 kg.
93140
PRESSING HAMMER Highly recommended for joining stuck down carpet.
93916
SEAM ROLLER For efficient smoothing of all joints. Wooden handle. Length: 110 mm.
109
FLOORING TOOLS
HANDLING
Handtrucks - Trolleys 93764
CYLINDRICAL LOADS ANDTRUCK
Curved apron especially designed for cylindrical loads. Multipurpose: for transporting PVC or carpet rolls, paint, adhesive barrels, levelling compounds. Robust steel structure with solid rubber wheels. Maximum load: 250 kg. Fixed plate: 400 x 185 mm. Apron height: 930 mm. Total height: 1200 mm. Weight: 12 kg.
93761
RADIATOR LIFT
For effortless lifting and removal of radiators before renovation of floors and walls. Very robust steel mounted on solid wheels. Max load: 150 kg Lift height: 370 mm Plate depth:195 mm Plate width 420 mm Total height 980 mm Weight: 30 kg
93775
CARPET ROLL TROLLEY
For carrying long rolls of carpet (to be used in pairs) or for carrying heavy rolls such as linoleum. 4 castors, two of which have a locking device, and 4 zinc coated iron tubes to facilitate unrolling. Tubes mounted on ball-bearings. Max. load: 400 kg. Dimensions: 65 x 50 x 33 cm.
110
93768
HIGH LOADS HANDTRUCK
Allows to pile boxes, cardboards or buckets till 1310 mm height. Slightly curved apron allowing stability of cylindrical loads. Very robust steel structure with flated pneumatic wheels (for the uneven grounds outdoors, pavements, gravels...). Max load: 250 kg. Fixed plate: 300 x 170 mm. Apron height: 1120 mm. Total height: 1310 mm. Weight: 12 kg.
93770
CARPET TROLLEY
For carrying rolls of carpet or PVC in lengths and of different dimensions. Very robust steel tube structure on inflated tyres. Maximum load: 300 kg. Dimensions: 175 x 45 cm. Weight: 23 kg.
93782
ROLL CARRYING HANDLES
For handling all types of floor covering rolls. Their design makes them lock automatically in the roll former when supported. Max. load 200 kg. Fork dimensions: 62 x 56 x 7 cm. Weight: 3.5 kg (a pair).
FLOORING TOOLS
HANDLING
Radiator lifter 93771 NE W
RADIATOR CARRIER
Pliable steel support, designed to sustain radiators while being painted. Mounted on solid wheels. Adjustable width and height to adapt to radiators of all sizes. Arms in galvanized steel. Dim folded: 1010 x 100 x 130 mm Dim. deployed: 1010 x 500 x 700 mm Weight: 10.5 kg Max load: 250 kg
!!
Assembled
Disassembled
Door lifters - Trolleys 93752
93750
FIXED HEAVY DUTY DOOR LIFTER Made of very robust cast aluminium. For removing heavy doors (fire-proof, safety doors, etc.). Swivel head for easy adjustment. Weight: 1 kg. Capacity: 200 kg. Lifting height: 75 mm.
FIXED DOOR LIFTER LIFT AND TURN TO RELEASE
Rubber socket to prevent damage to the floor. Weight: 0.750 kg. Lifting capacity: 75 kg. Lifting height: 70 mm.
For fixing, dismantling and installation of doors, windows, furnishings, partitions, etc. Rubber coated. Anti-slip.
93759
FOLDING HANDLE FLAT TRUCK
Steel folding-back trolley. Anti-skid mat and protective lip. Equipped with four 100 mm diam. rollers two of which swivel. Capacity: 150 kg Dimensions: Length: 740 mm Width: 400 mm Height with back open: 320 mm Height with back folded: 200 mm.
93757
SET OF 4 «TRIANGLE» SKATES
Dimensions: 17 x 17 x 22 mm. Height: 5 cm. 3 swivelling wheels per skate. Tested load: 450 kg per set of 4.
93769
SET OF 4 SKATES Easy to store away
Sliding (sheet, concrete, parquet, carpet) is performed with an effort divided by 12. Diameter: 155 mm. Weight: 1.2 kg. Thickness: 12 mm. Tested load: 600 kg per set of 4
HEAVY DUTY TROLLEY
Dimensions: 550 x 350 x 100 mm. 4 swivelling polyamide wheels. 4 anti-slip pads at ends. Tested load: 200 kg.
nE W
93758
!!
Rubber
EDGE STOP
TEFLON
111
FLOORING TOOLS
PROTECTION - PPE
ANTI-CUT GLOVE
UT
IO N
Protects the hand in case of blade slipping. «Spectra» seamless stitch. One size. Ambidextrous. Ultra-light, airy.
!
CA
Work protection CT DOES NOT PROTE ES OR D LA B FROM SAW G BLADE STITCHIN
94889 94890
Size 10
Size 10
94896 NE W
Size 9 Size 8
Resistant to many solvents, acids, alcohol… Non-suede model. Length: 320 mm. Very thick: 0.56 mm.
Size 9
94879
94878
PAIR OF GLOVES «NITRILE»
!!
91035
KIT «SAFETY CUT»
Includes: • 1 PVC safety knife 91045 • 1 metal safety knife 91140 • 50 blades 692050 • 50 long straight blades 92136 • 1 anticut glove 94896
SECURITY ! PROTECTS FROM BLADE CUTS
94885
EAR MUFFS 94880
DISPOSABLE DUST MASK Protects from dust and non-toxic particles size > 3 to 4 microns. Does not protect from fine dust and lead. Weight: 4 g. Supplied in box of 50.
Very good machine noise attenuation. Weight: 218 g. Complies with standard EN 352-1 EPI of Class 2
93385 94886
SAFETY GOGGLES
Protects eyes and glasses from paints projection, dust... Indirectly ventilated. Anti-mist screen.
ASBESTOS KIT Contains: • 1 overall • 1 pair of gloves «Éconohand» • 1 half mask FFP3S • 1 200 litres bag • 1 roll of adhesive (tape) • 1 pair of cover-boots
94886
Goggles mask (to be ordered separately) 94883
Half mask FFP3S 94881
SOLVENTS EMANATION PROTECTOR Extremely efficient against paint solvent emanations. With exhalation valve. No protection against lead. Weight: 220 g. Complies with standard EN 405 2002
94883
93387
200 l. Spare bag. Box of 20 bags.
200 LITER BAG WITH LOGO «ASBESTOS»
94884
Overall Tyvec protech With hood, Rubber band at waist and ankles PAIR OF GLOVES «ÉCONOHAND»
HALF MASK FFP3S
Dust mask with P3 class (highly toxic) particle filter. Protects also from asbestos and lead dust. Weight: 15 g Complies with standard EN 149 2001
112
94887
Pair of cover-boots in polyethylene L x h: 385 x 480 mm
FLOORING TOOLS
PROTECTION - PPE
Knee protection TROUSERS «HYGROVET»
SIZES
Especially intended for professionals normally working on their knees. This protective pair of trousers has been approved by the Minister of Health. Class II PPE protective clothing against risks of professional disease (knee hygroma). Trousers fitted with 2 pockets, 1 revolver pocket, 1 folding rule pocket and 2 pockets for the supplied foam knee pads.
38 94838
91665
40 94840
KNEE PADS
42 94842 44 94844
94834
46
94846
48
94848
S: ELASTIC STRAP LOOD DO NOT STOP B CIRCULATION rubber foam interior
Caps made of rigid polypropylene perfectly adapted for an intensive professional use. Waterproof, wear and abrasion resistant. Highly resistant covering cloth. Super-dense rubber foam stuffing. Adjustable auto-grip fastening straps.
ANTI-SLIP FLUTED DESIGN
94850 50
Spare foam knee pads
52 54
94852 94854
NE W
Colour: white only.
91670
SOFT SILICON KNEE PADS
91675
SILICON KNEE PADS
Inner silicon padding that surrounds the knee for better protection and comfort. Auto-grip fastening straps. Nonslip transparent polypropylene shells that do not mark the floor. !!
NE W
Ideal knee protection. Very comfortable. Auto-grip fastening straps.
!!
94967
RUBBER KNEE PADS Nonslip rubber outer surface. The inner side is lined with very comfortable 18 mm thick rubber foam. New elastic straps with holes for adjustment. Standard DIN 23311. For miners.
KNEELING MAT Preformed cushion in cellular rubber. Transport handles. Ideal knee protection without possible discomfort of knee pads. For hard floors. 370 x 250 mm.
NE W
91660
!!
NEW ELASTIC STRAPS
113
FLOORING TOOLS
POWER TOOLS
FEIN Multimaster
SAND
95971
95982
STANDARD PAD
CARBIDE PLATE
(set of 2)
Sanding of tiling adhesive, roughcast, paint on wood.
95988
95990
FLAT PAD
vacuum kit
Very fine. For slatted vents. Set of 2.
• 2 drilled pads, • 5 sanding discs grit 60, 80, 120, • 1 capping hose • 2 connectors for diam. 32 and 27 mm, 2 adaptators for vacuum cleaner.
NON PERFORATED TRIANGLE ABRASIVES
PERFORATED TRIANGLE ABRASIVES
Grips to both flat and standard pads.
Autofixing
95989
SET OF SANDING PROFILES Pack of 5 abrasives Grit Ref.
Includes: • 1 support, • 6 interchangeable profiles: 1 in V shape for angles of 90°, 1 in trapeze shape for joints with grooves and tongue, 1 for straight profiles, 1 in convex shape (large), 1 in concave shape and 1 in convex shape (small) • 5 abrasive sheets grit 80, 120 and 180.
Pack of 5 abrasives Grit Ref.
40
95973
40
95949
60
95974
60
95966
80
95975
80
95967
120
95976
120
95968
180
95977
150
95969
NE W
95690
SANDING PLATE SET
!!
Pack of 25 abrasives Grit Ref. 80
95991
120
95992
180
95993
The new sanding plate permits now sanding average and large surfaces with an efficiency superior to that of the vibrating sander.
Ø 115 mm perforated auto-grip sanding disks
Multimaster equipped with plate 95690.
16 disc card Grit Ref.
114
40
95691
60
95692
80
95693
120
95694
180
95695
L THAN MORE POWERFU NDER A VIBRATING SA Set composed of - 1 sanding plate Ø 115 mm – 6 sanding discs (2 in grit 60/80/180)
Surface sanding
Sanding doors and windows
FLOORING TOOLS
POWER TOOLS
FEIN Multimaster 95970
FEIN MULTIMASTER
MULTIPLE USES
Fast and easy changing of accessories (without key)
15 sanding discs grit 60, 80, 120 (5 of each)
Multipurpose device for all furnishing, renovation and repair work depending on the accessory that is fitted.
1 standard sanding pad
95972
Supplied in rigid plastic case
CUTTING
WIDE E-CUT BLADE
1 wide E-cut blade
Motor power: Flex: Oscillation: Weight:
1 universal E-cut blade
1 rigid spatula
250 W 5m 11000 - 2 000 rpm 1.1 kg
95978
UNIVERSAL E-CUT BLADE
For door frames, skirtings etc. Wood up to 50 mm thickness and plasterboard. width 65 mm.
Bimetal teeth for wood, plastics, sheet metal up to 2 mm, copper pipe, aluminium profiles up to 2 mm.
95987
95981
HSS SAW BLADE
BLADE FOR WOOD + DEPTH STOP
For removing strips of old mastic on windows.
For straight cuts to parquet, laminate and panelling.
95980
Spare blade for wood 95986
JOINT REMOVAL
3 mm JOINT CUTTER
JOINTS / SLOTS CARBIDE BLADE
For removing tiling joints, making slots in roughcast, concrete.
For removing «ships decking» type joints
95984
95983
SOFT FLOORS
95985
RIGID SPATULA
BLADE FOR SOFT FLOORS
For old paintwork, carpets, foam, rest of adhesives etc.
For cutting rigid PVC flooring, linoleum, rubber, loop pile carpets, card, leather etc.
115
FLOORING TOOLS
POWER TOOLS
Wall sanders 95965
«W-3000» SENIOR WALL SANDER
Rapid connection to vacuum cleaner
Engine close to the head. Better handiness.
Sander for walls and ceilings. Light weight and well balanced. Very manoeuvrable.
Plate with light suction cup effect, if used WITH A VACROM FINE DUST VACUUM CLEANER.
Power: Speed: Length: Sanding disc diameter: Weight:
Handle switch and speed regulator
Multi-directional articulated head
550 W 650-1300 rpm 1.52 m 225 mm 3.6 KG
95959
Sanding ceiling
Sanding wall
Left part removable for sanding in angles.
Auto-grip plate for sanding discs diam. 225 mm
Supplied in transporting sheath with 4 m vacuum hose.
Spare foam 95955
«W-1000» JUNIOR WALL SANDER
93975 High output
For easy, effortless and precise sanding.
Power: Speed: Sanding disc diameter: Weight:
VACUUM CLEANER «VACROM»
See page 73.
Connects easily to the 2 sanders
1200 W 650 - 1300 rpm 225 mm 3.1 kg
ABRASIVES Ø 225 mm
Aluminium oxide. Felt back
Supplied in PVC carrying case without vacuum hose Very manoeuvrable
97838
Flexible suction hose, 4 m
Foldaway part for sanding in angles
Grit
Ref.
Grit 40
95795
Grit 60
95796
Grit 80
95797
Grit 120
95798
Grit 220
95799
Direct connexion with VACROM
Various machines MIXERS Voir page 65
THERMIC GRINDER
See page 63
GRINDERS See page 72
CARTRIDGE GUN
See page 106
«EXAKT» 150 SAW
See page 125
LOW SPEED SANDER PBV FOR EXTERIOR THERMIC INSULATION See page 80
116
FLOORING TOOLS
POWER TOOLS
Door trimmers 93499
«START» DOOR TRIMMER
NE W
For easy and effortless cut of solid wood, laminate and MDF. - Progressive startup motor - Switch lock - Very fine plate allowing cutting up to 1.5 mm height with respect to the floor. - Slot for vacuum extract, can be connected to VACROM vacuum. Supplied in PVC box with one Ø150 mm 30 teeth mounted blade.
!!
Doors and door frames
SLOT FOR VACUUM EXTRACT
Power: Cutting depth: Min. cutting height: Max. cutting height: Speed: Weight:
1300 W - 220 V max 400 mm 1.5 mm 30 mm 1400 - 3000 rpm 3.9 KG
Skirting
93559
Spare blade for wood
Expansion joints
CUTTING HEIGHT ADJUSTMENT
CUTTING DEPTH ADJUSTMENT
93545
DOOR TRIMMER «PLUS»
UNIQUE CUT IN LE ANGLES POSSIB
2 knurls for cutting height adjustment. Cut in angles. Supplied in plastic carrying case including a 24 teeth blade for wood, a 3.50 m hose with conic slot for vacuum.
BOTH HANDLES can be adjusted vertically or horizontally for a more comfortable and better use of the machine.
93541
Spare blade for wood 93542
Spare blade for metal
Cut in angles
MORE POWERFUL ENGINE 1300 W
KNURL 2 FOR HEIGHT ADJUSTMENT
KNURL 1 FOR CUTTING HEIGHT ADJUSTMENT
Door frames
CUTTING HEIGHT DISPLAY
Skirtings
Power: Cutting depth: Min. cutting height: Max. cutting height: Rpm unladen: Continuous acoustic pressure «A»: Acoustic power: Weight:
1300 W - 230 V maxi 47 mm 8 mm 35 mm 5000 rpm
VACUUM SLOT (HOSE INCLUDED)
REMOVABLE CARTER FOR CUTTING IN ANGLES
94 dB (A) 105 dB (A) 5.6 Kg
Doors
117
FLOORING TOOLS
FLOOR CLEANING
Spray / Extraction 93680
SPRAY - EXTRACTION CLEANING MACHINE Very powerful multipurpose machine. Ideal for sites of approx. 200 m2. Can be used as dust vacuum cleaner. Supplied with hoses, without accessories. Made in France. Unbreakable casing. Water level safety float. Simple and quick to to use and to empty. Dimensions 45 x 44 x 56 cm. Weight: 14 kg. Voltage: 220V. Contents: 15 litres.
93694
HARD FLOOR BRUSH
93694
Width: 42 cm.
93693
93693
CARPET BRUSH Width: 22 cm.
93695
93695
EXTRACTION BRUSH
230V -1100W 2300 mm 166 m3/h 40 W 5 bars: 1.5 l /min 450 x 440 x 560 mm 14 kg 15 litres
CLEANING PRODUCTS
94592
DETERGENT.
Concentrated disinfectant. No harmful effect on colours. Leaves no residues. Pleasant smell. 5 litre can
Self propelled machine for cleaning hard floor (PVC, linoleum, tiles, concrete…). Well balanced, very simple commands, easy to use. The cleaning solution is sprayed to the floor and a rotating brush scrubs it. Equipped with a wide rake gathering and sucking up dirty liquids behind, leaving floor clean and dry. • Compact design. • Rotomolded polyethylene bins. • Adjustable handle height. • Easy maintenance
118
30 L 41 L 45 cm 30 kg 75 cm 1 100 m2/h Assisted brush/disc 750 W - 230 V 2 stages 158 kpa 25 m 65.5 kg 98 kg 110 x 54.5 x 97 cm
STAIN-REMOVER.
Used to remove fatty stains. 5 litre can
!!
AUTOCLEANER «CLEANET» 45 cm
Solution bin Collector bin Cleaning width Brush/disc diameter Brush/disc pressure Sucker width (Max) performance Drive system Brush motor Vacuuming motor Vacuum Supply cable Net weight (machine only) Operational weight Length x width x height
93699
93697
NE W
Vacuum / Power: Suction capacity: Air inflow: Injection / Power: Pressure: Dimensions: Weight: Capacity :
For carpet maintenance. Significant time saving and reduced operator fatigue. Continuous monitoring of the operation through transparent port-hole. Articulated «chevron»-form brush carries out continuous mechanical action. Brush dimensions: 34 x 26 x 13 cm. Weight: 11.5 kg. 220 V / 75 W. Rotation speed: 750 rpm.
D WITH FAST AMORTIZE ANING LE RESPECT TO A C ST O C Y N COMPA
SPECIAL EQUIPMENT
Laminate floor installation
P.120
Scribing and cutting PVC - lino
P.128
Cold welding PVC – lino
P.129
Hot welding PVC – lino
P.130
Strechted carpet
P.138
Ceramic installation
P.139
119
SPECIAL EQUIPMENT
LAMINATE AND PARQUET INSTALLATION
Miscellaneous tools 93227
93230
DOUBLE SQUARE FORMER SET
ADJUSTABLE ANGLES FORMER
Fitted with metal needles. Supplied in plastic case containing 2 former sets of 20 cm each. Can also be fitted into each other to make a 40 cm former set or can be linked up with an adjustable angles former supplied, enabling you to position the former set to the required shape to be cut.
Wooden handle. Length 18 cm.
94959
RUBBER MALLET
CLEVER!
Does not stain. Ø 60 mm.
93226
93366
METAL FORMER SET
DOUBLE SUCTION LIFTER DISCS
Fitted with metal needles. Length: 15 cm. Supplied in blister card.
For carrying and adjusting parquet strips. Traction up to 60 kg. Length: 32 cm. Suction pad Ø 11.8 cm.
Shears 93416
GUILLOTINE «CAMELEON CUT» Small guillotine. Blade 130 mm. For cutting traditional parquet, wooden profiles, skirtings, door frames, etc. Bevelling from 45° to 90°, up to 28 mm thickness. Handle length: 380 mm. Dimensions: 420 x 235 mm. Weight: 2.8 Kg.
93417
REMOVABLE ANGLE CUTTING PLATE FOR CUT AT 90°
Spare blade
MAX WIDTH 10 CM FOR FOR WOOD OF 1 CM WIDTH
120
MAX WIDTH 28 MM ONLY FOR STRIPS
SPECIAL EQUIPMENT
LAMINATE AND PARQUET INSTALLATION
Laminate guillotine «STRATICUT» -NO NOISE! -NO DUST! TOP LAYER! -NO DAMAGE TO -SEAMLESS CUT!
93725
«STRATICUT»
• For cutting laminate 7 to 11 mm thick, even with underlay. • Neat 90° cut without damaging the melamine overlay, no noise. 210 mm • Blade without sharp edge, very safe. • Cutting width: 210 mm. • Supplied with support for cutting long pieces and without shaving receiver. • Weight: 7 kg. • Length: 680 mm.
ERGONOMIC HANDLE 4 FELT PADS PROTECT FROM SCRATCHING
VER SHAVING RECEI INCLUDED
93726
Spare PVC shaving receiver. No dust!
DELIVERED COMPLETE INCLUDING SUPPORT SHAVING RECEIVER INCLUDED
93728
«MEGA STRATICUT»
210 mm
• Base equipped with 4 anti-scratch felts. • Neat seamless cut without damaging the melamine layer. • Cuts up to 15 mm thick laminates (even with felt or underlay). • Weight: 14 kg.
LONG HANDLE FOR LESS EFFORT
LESS EFFORT
SPACER
320 mm SUPPLIED WITH SUPPORT
SPACER TO BE REMOVED FOR CUTTING 320 mm PLANKS.
93732
SHAVING RECEIVER
HEAVY DUTY BLADE
LONGER HANDLE, LESS EFFORT
«STRATICUT VARIO» • For cutting laminate up to 15 mm thickness (even with felt or underlay) and up to 32 cm width. • No dust, neat cut. • For easy cut. • Cut in angle from 42° to 90° with positioning every 1°. • Weight: 18 kg
ANGLE ADJUSTMENT SHAVING RECEIVER INCLUDED
Supplied with: • 1 support. • 1 shaving receiver.
ANGLE ADJUSTER LOCKER
CUT IN ANGLE ° FROM 42° TO 90 SUPPORT
BASE TO BE DISMANTLED FOR EASIER TRANSPORT AND STORAGE
121
SPECIAL EQUIPMENT
LAMINATE AND PARQUET INSTALLATION
Laminate and engineered wood NE W
94703
LAMINATE KIT «PRO»
!!
WOODEN TAPPING BLOCK
Includes: 20 PVC wedges, 1 pulling iron, 1 PVC tapping block.
For shunting planks. Does not damage the edge of the plank.
NE W
NE W
BASIC KIT
94739
94742
94733
FLOOR WEDGES
!!
!!
94710
ADJUSTABLE SPACER
94725
94730
KIK «BACK»
Put alongside the wall and compress laminate. Sold by pair. Dim.: 21 x 18 cm. Plate width: 58 cm. Weight: 580 g / pce. Power 150 kg.
POWER SHUNTING DEVICE «LUKAS» For shunting parquet, laminate and all flooring/covering planks with a rubber mallet. A tapping block, a hammer and a pulling iron in 1 tool. Plate width: 10 cm for 94723 version and 12 cm for 94724.
BELT-BAND-CLAMP
HOW IT WORKS: Plan 1 band per meter. Length: 4.00 m. Supplied with clamp.
PULLING IRON
For shunting laminate planks with a rubber mallet.
94746
«PRO» 55 cm
Plate width: 14 cm. Special Nylon block
94723
122
Wedges with thicknesses from 7 to 14 mm. Easily removed when installation finished.
Put alongside the wall and against the plank. Width: 130 mm. Tightening up to 30 mm.
Can containing 100 PVC spacers. They can slide and adjust to 8 to 15 mm thicknesses. Easily removed by their handles, they can be reused.
31 cm
40 PVC WEDGES
94724
41 cm
94748
«PRO» 52 cm
Plate width: 11 cm
adjustable wedge
SPECIAL EQUIPMENT
LAMINATE AND PARQUET INSTALLATION
Coloured sealants COLOUR SEALANT
94729
Antifungal, waterproof, flexible, to be applied around all cutting. Content: 310 ml. For 10 to 12 meters (Ø 5 mm).
CLIC SEAL
Wood colours 94783
Maple
94780 Light oak -
To make laminate and parquet joints waterproof. For wet rooms. 125 ml tube.
Beech
94781 Oak - Light beech
for finishing repairing
94782 Pear - Cherry
or
94784
Merbau
Others colours 94994 Rust-coloured 94997
Black
94998 Concrete grey
93050
93058
MANUAL ADHESIVE GUN
CORDLESS ADHESIVE GUN - 7.4 V BATTERY
For 310 ml cartridges.
NE W
Adhesive guns !!
For 310 ml cartridges and 400 ml packs. Supplied in a PVC case with 1 battery 7.4 V and one charger. See page 106
Recess anti-leak system
93052
«Tajima» ADHESIVE gun
93059
spare battery
For 310 ml cartridges. High performance device, extra long, 360°, double transmission.
Recess anti-leak system
Door stoppers - Pipe collars DOOR STOPPERS for laminate
For a nice finish around pipes. Solid wood diameter 50 mm. Thickness: 20 mm.
Patented system allowing the door stopper to be fixed in the laminate, not in the concrete. Allows wood or laminate expansion. Ideal for heated floors.
18 mm
3700
22 mm
3710
18 mm
3701
22 mm
3711
18 mm
3702
22 mm
3712
18 mm
3703
22 mm
3713
Oak
Beech
Cherry
Maple
Dim. Ø x H
WOOD
int. Ø
METAL
PIPE COLLAR FOR RADIATORS
1- Drill Ø 8 mm and install the plug
2- Screw the door stopper
REF. St. steel
39 x 42 mm
34 x 35 mm
6380
Alu silver 6381 Alu gold 6382 Oak
6390
Beech
6391
Cherry
6392
Maple
6393
(more information page 28)
123
SPECIAL EQUIPMENT
LAMINATE AND PARQUET INSTALLATION
SPARE GLUE STICKS
94735
Dim 8 x 1.5 x 1.5 cm Weight 17 g. Supplied in individual plastic bags.
RESTORING CASE FOR PARQUET PLANKS
NE W
Repair !!
COLOUR REF. Medium 98745 walnut
Contains 20 wax sticks of different colours + 1 gas soldering iron.
Pine
98746
Light pine 98747 Grey/ White Cream
98749
Cherry
98750
Light walnut
94727
98748
98751
COLOUR REF. Transpa- 98735 rent yellow Yellow Rustic oak Beech Light pear Light beech Dark walnut
98753
Dark pine
98743
Birch
98754
Medium pine
Scrapers To clean the joints of the slats of parquets. Length: 165 mm. Integrated bottle-opener.
AMERICAN SCRAPER
For scraping paints, laquers... on wood surfaces.
94270 Length: 27 cm. Blade width: 40 mm.
94271 Length: 32 cm. Blade width: 60 mm.
Spare blades 94275
Width: 40 mm. 94276
Width: 60 mm. 124
98741
Light oak
Repair with wax before spraying lack. Shiny aspect.
parquet joint scraper
98740
98742
LACK FOR REPAIR 75 ml
Wooden handle. Blade width 6 cm.
98739
Maple
JUNIOR RESTORING CASE
PARQUET SCRAPER
98738
98752
94728
94711
98737
Limba
Contains 1 battery soldering iron (battery supplied) and 8 wax sticks (common colours). Supplied in plastic case.
94713
98736
98744
LAMINATE AND PARQUET INSTALLATION
«Exakt» saw MULTIPURPOSE SAW
93890
«EXAKT» 150 SAW
Slim and light, this saw is easy to use and can cut various materials. Supplied in metal case with one 18 teeth tungsten carbide blade and one 60 teeth steel blade. Power: 400 W - 230 V. Cutting depth: 14 mm. Blade speed: 3500 rpm. Blade Ø: 54 mm. Weight: 1.2 Kg.
AUTOMATIC BLADE RETRACTION
Cut in the wall for installing a ventilation or a switch…
Cutting tiled walls, joint repair...
Cutting laminate, parquet floors, linoleum and PVC security floors
Spare blades
CUTTING DEPTH ADJUSTMENT
93893
Tungsten carbide
18 teeth. Wood, parquet, laminate, linoleum, PVC safety floors... Supplied with suction port for vacuum Ø 36 mm.
93892
Steel
FOR CUTTING:
VACUUM SLOT GUIDE
60 teeth. Metal, soft steel, aluminium, plastics...
• Laminate up to 14 mm thickness • Metals: soft steel and aluminium up to 1.5/2 mm • Composites: MDF, plywood, particle board up to 14 mm thickness • Plastics: glass fibre, plexis... • Minerals: Ceramic (tile floors), slate up to 8 mm thickness.
93894
Diamond
Tile floors, minerals…
Other saws / door trimmers 93555
93545
SKIRTING SAW
• In horizontal position (1): For trimming skirtings on site before laying laminate. • In vertical position (2): For making an expansion joint in engineered wood or laminate. Supplied in a plastic case with a dust collecting bag and an external sucking port.
DOOR TRIMMER «PLUS» For cutting • doors • door frames, skirtings • expansion joints • angles (see page 117)
93499
«START» DOOR TRIMMER
NE W
For cutting • doors, skirtings and door frames • expansion joints (see page 117) !!
1 Power: Speed: Carbide blade: Cutting depth: Cutting height: Weight:
2 710 W - 230 V 10 000 rpm 100 x 22 x 4 mm 20 mm maxi 10 mm 4.5 Kg
95970 93557
spare blade
FEIN MULTIMASTER
Multipurpose device for all furnishing, renovation and repair work depending on the accessory that is fitted.
125
SPECIAL EQUIPMENT
LAMINATE AND PARQUET INSTALLATION
Cleaning 94655
«SANDY» SANDING MACHINES
Ø 330 mm PARQUET POLISHING BUFFER KIT
US
(see page 69)
Smaller and lighter machine for polishing after application of wax or oil on parquet, for light sanding or maintenance. (see page 71)
E! Light sanding of parquet: • Disc 94452 + double sided sanding discs • Disc 94452 + felt disc + mesh discs • Satellite disc 94794 + sanding disc Ø 125 mm.
Parquet maintenance: • Scrub old wax with disc 94471 + black pad. • After pore filler has been applied and dried, use disc 94471 + green pad. • After varnishing or new wax, disc 94471 + white pad.
94451
1500 W 94476
1850 W 94480
2400 W
Abrasives for parquet sanders SANDING DISC FOR «B-150» EDGE SANDER
SANDING BELT FOR «EX-200» EXPANSION SANDER
Silicium carbide belt 480 x 200 mm.
Silicium carbide single side sanding discs Ø 150 mm. Grit
480 x 200 mm
Grit 24
94582
Grit
Washer fastening
Auto-grip
94583
Grit 24
94425
95833
Grit 40
94584
Grit 40
94426
95834
Grit 60
94585
Grit 60
94427
95835
Grit 80
94586
Grit 80
94428
95836
Grit 120
95837
Grit 100
Aluminium oxide sanding paper 750 x 200 mm.
126
94429
Grit 120
SANDING BELT FOR «BDE-200» BELT SANDER
95838
SANDING ROLLS (to be cut)
Grit
750 x 200 mm
Grit 24
94492
Grit 40
94493
Grit
25 m x 200 mm
Grit 60
94494
Grit 24
94482
Grit 80
94495
Grit 40
94483
Grit 120
94496
Grit 60
94484
Grit 80
94485
Grit 120
94486
Silicium carbide sanding rolls.
SPECIAL EQUIPMENT
LAMINATE AND PARQUET INSTALLATION
Parquet sanders 94835 Tough and compact machine, simple to use and easy to handle. 2 part modular design. Easy insertion of abrasive sanding belt. Supplied with dust collecting bag. Excellent dust extraction (6800 rpm fan). Equipped with a single belt to control noise and vibrations.
NE W
«EX-200» EXPANSION SANDER
VIBRATION FREE
!!
Sanding belt is easily loaded on the drum. Centrifuge speed makes expand the drum and assure a perfect fixing of the sanding belt.
silent
94836
Spare dust collector Voltage: Power: Drum width: Drum speed: Drum diameter: Weight: Belt dimension:
50 Hz - 230 V 1500 W 200 mm 2700 rpm 150 mm 59 Kg 480 x 200 mm
59 KG Lever system to lower the cylinder
94845
«BDE – 200» BELT SANDER NE W
3 part modular design for easier transportation. Supplied with dust collecting bag. Excellent dust extraction (8000 rpm fan). 3 drum pressure levels in addition to lowering lever. Maintenance free motor and gears greased for life.
!! DRUM Easy belt fixing, automatic belt tensioning and tracking system.
94849
Spare dust collector Voltage: Power: Drum width: Drum speed: Drum diameter: Weight: Belt dimension:
50 Hz - 230 V 2200 W 200 mm 2000 rpm 150 mm 80 Kg 750 x 200 mm
80 KG
Unique belt system for easy starting and reducing vibration
94815 For sanding parquet, in addition to a drum or belt sander. Suitable for stairs and parquet floorings along the skirting boards, under heaters, etc... where drum and belt sanders cannot reach. Supplied with dust collector bag. Excellent dust extraction (9800 rpm fan). Swivelling handles
NE W
«B-150» EDGE SANDER !!
P
CS AND CLAM AUTO-GRIP DIS FITTED DISCS
94816
Spare dust collector Voltage: Power: Disc diameter: Disc speed: Weight:
50 Hz - 230 V 1500 W 150 mm 3600 rpm 15 Kg
15 KG
127
SPECIAL EQUIPMENT
SCRIBERS - CUTTING PVC
Scribing 93355
COMBI SCRIBER Turning lower guide rail allows use as standard or recess scriber. Length: 17 cm. Supplied with 10 needles and 3 blades.
95410
JOINT SCRIBER Length: 19 cm.
93341
Spare needles 95430 93356
Spare blades Pack of 6.
93357
Spare needles Pack of 25.
HEIGHT MARKING TOOL For drawing along the wall using a pencil (not included). Ideal for coving PVC or linoleum or installing skirtings or edge profiles. Length: 21 cm. Maximum height of drawing: 20 cm.
95400
MAXI BAR SCRIBER
Wheel passed over wall contour transfers to vinyl, linoleum floor covering or laminate. Transfer maximum of 38 cm. Spare needles 93357.
Cutting 95520
«LINOCUT» SEAM CUTTER For cutting PVC, linoleum... Adjustable cutting depth. Can be used in both directions.
95505
EDGE TRIMMER To make regular linoleum edges. To cut the damaged edge of a lino roll. Cutting width 1.5 cm.
95521
Spare blades
95503
Pack of 10.
Spare blades Pack of 5.
95440
«MOLOSS» SKIRTING TRIMMER
For easy scribing and trimming at the required height when coving the vinyl on the wall. Adjustment each cm between 7 and 13 cm.
95507
STRIP CUTTER 6 to 30 cm
To make PVC and linoleum skirtings.
95508
Set of spare blades 95510
«PROVINOL» EDGE TRIMMER
For PVC and linoleum. Supplied with a round blade Ø 40 mm. Seamless cut wall to wall from 2 to 27 mm.
95512
Set of 2 spare blades Ø 40 mm 128
TILE CUTTER
For rigid and soft PVC tiles, linoleum, rubber, etc. Aluminium structure.
93426
61 cm Cutting width: 61 cm.
93420
30 cm Cutting width: 30 cm.
SPECIAL EQUIPMENT
COLD WELDING PVC
Cold welding kits 95605
95600
COLD WELDING KIT
COLD WELDING KIT
Plastic carrying case containing: - 4 tubes with «A» nozzles 44 g - 1 tube with «C» nozzle 44 g - 2 masking tape rolls 50 mm x 50 m - 1 cutter 18 mm.
COLD WELDING
For PVC floor and wall-coverings and also PVC skirtings. To create a good cold weld, stick masking tape over the joint and cut a strip alongside the joint. Inject the cold welding liquid (it should overflow). Remove the masking tape immediately. Welded seams can be walked on within 10 minutes. Caution ! the welding seam takes one hour to harden completely.
Wooden carrying case containing: - 1 bottle with «A» nozzle, - 1 bottle with «C» nozzle, - 1 «C-special» nozzle, - 1 litre of «Seal» product, - 1 litre of «Seal-pate» product, - cleaning product for «A» nozzle.
A = for joints smaller than 1 mm 95610
95620
95670
EMPTY BOTTLE WITH APPLICATOR NOZZLE »A»
«SEAL» WELDING PRODUCT To fill into the «A» nozzle bottle. Capacity: 1 litre. For 300 m of joints.
TUBE WITH APPLICATOR NOZZLE - A 132 gr. With product for 65 m of joints.
95625
CLEANING PRODUCT FOR NOZZLE «A»
A
95650
TUBE WITH APPLICATOR NOZZLE - A 44 gr. With product for 20 m of joints.
C = for joints larger than 1 mm 95640
95630
«SEAL-PASTE» WELDING PRODUCT
95680
EMPTY BOTTLE WITH APPLICATOR NOZZLE »C»
To fill into the «C» or «C-special» nozzle bottle. Capacity: 1 litre. For 150 m of joints. Also for seaming loop pile carpets.
* Supplied also with a «C-special» nozzle.
TUBE WITH APPLICATOR NOZZLE - C 132 g* With product for 40 m of joints.
95660
C
TUBE WITH APPLICATOR NOZZLE - C 44 g* With product for 15 m of joints.
Junction PVC profile / PVC floor 95635
EMPTY BOTTLE WITH APPLICATOR NOZZLE «C-SPECIAL»
C
For «SEAL PATE» 95640. Example: for seaming PVC stair-nosing and vinyl flooring.
EXTRA FLAT
129
SPECIAL EQUIPMENT
HOT WELDING PVC – LINOLEUM
Hand grooving JOINT GROOVING
1
Means making a groove along a joint between two floor coverings glued side by side (less than 1 mm). Groove depth: • homogeneous coverings: 2/3 of the thickness. • non-homogeneous coverings: only the wear layer.
95100
WHEELED HAND-GROOVER
BLADE DEPTH ADJUSTMENT
To make a «U» groove without ruler, in a regular and uniform way. Frame with 4 castors and 3 wheels guiding in the groove.
95176
Spare blades Pack of 10.
Before grooving
THIN REAR GUIDE WHEEL
After grooving
A
1
95175
P-TYPE GROOVER
To make a «U» (round) groove. Universal groover. (Sommer, D.L.W, Forbo Sarlino…). Length: 24 cm.
2
3
RETRACTABLE Ø 3.3 mm GUIDE WHEEL
The groove starts from the wall. The two thin wheels (1 and 3) stay in the groove for accurate guiding.
THIN FRONT GUIDE WHEEL
BLADE
A B
3
2
1
Turn it and finish your grooving.
95105
GROOVER FOR SAFETY FLOORS
To make a «U» groove in very hard carborundum-based floor coverings (Type ALTRO, POLYSAFE, TARASAFE..). Supplied with a mounted two sided blade + guide.
95176
Spare blades Pack of 10.
95180
GROOVER WITH GUIDE
To make a «U» groove. Guide allowing constant depth and following of joint. Length: 19 cm.
95181
Spare blades
95106
Spare blade 95125
WALL GROOVER
To make a «U» groove in thin wall coverings (e.g.: shower system). Pre-adjusted unique blade depth.
ER SPECIAL SHOW C PV SYSTEM
Pack of 10.
95110
STANDARD GROOVING TOOL
To groove soft plastic materials. Supplied with 6 spare blades in the handle. Length: 19 cm.
95111
Spare blades Pack of 10.
95185
TRIANGULAR SCRAPER
To make a «V» groove. For TARAFLEX floor coverings. Wooden handle. Brass plated collar. Dimensions: 24 x 6 cm.
95126
Spare bar 91580
HIGH-GRADE STEEL RULER WITH HANDLE
For guiding grooving tools 95175, 95185 et 95125. Dimensions: 800 x 60 x 4 mm.
95186
Spare blade 95178
TRIANGULAR CARBIDE SCRAPER To make a «V» groove. Carbide blade.
95179
Spare blade 130
TEMPLATE FOR SKIRTING ANGLES For grooving in coved skirting angles.
95446
Flat
95445
90° square
SPECIAL EQUIPMENT
HOT WELDING PVC – LINOLEUM
Hand grooving
95120
«PICO» STANDARD
NE W
G SECURE GUIDIN SYSTEM
To make a «U» groove without ruler, in a regular and uniform way. New type of guiding system (no play) allowing more precision. Can be used in both directions.
95123
!!
E FOR EXTENDED GUID CE AN BETTER GUID Blade locking system
Depth adjustment
«PICO» SATEFY FLOOR
patent pending
BLADE
95122
«U» shape spare blade for 95120 95124 Spare bar for 95123
Push
Pull
«U» shape blade Ø 3.3 mm
Stainless steel guide depth 1 mm x thickness 0.3 mm
Grooving machines 95310
230 V
95311
110 V
GROOVING MACHINE «TERA»
For grooving PVC and linoleum flooring joints before hot welding. Automatic blade rising system. Makes grooves of 3.3 mm. Supplied in a metal carrying case (Ref. 95009) including 1 carbide blade, 1 tightening key and 1 dust bag.
ON PERFECT SUCTI S OF SHAVING Grooving depth graduation
LARGE rear guide wheel SET ON 4 WHEELS
Depth adjustment
Spare grooving blades for «TERA» SHAPE Elliptic
REF.
95009 95017
95090
230 V
ROD Ø 4 mm 5 mm 4 mm
95091
FLOORING Homogeneous PVC, heterogeneous PVC, sports floor, linoleum
TEETH 12 teeth tungsten carbide
PVC Safety floors
Diamond
THIN FRONT GUIDE WHEEL Optimal ventilation blades system
Voltage: Power: Revolution speed: Grooving depth: Blade Ø: Weight:
230 V 1200 W / 230 V 5.000 rpm 11 to 4 mm 125 mm 3.8 Kg
110 V
GROOVING MACHINE LEISTER «GROOVER» Set on 3 wheels. • Automatic blade rising system. • Blade depth adjustment from 0 to 4 mm. • Makes grooves of 3.5 mm. • Extra fan and dust bag for perfect vacuuming. • Power: 700 W. Revolution: 18 500 rpm. Weight: 6.7 kg. Supplied in cardbox with one 8 teeth carbide tungsten blade (Ref. 95013).
Shaving collector
DEPTH ADJUSTMENT LARGE REAR WHEEL
95098
PVC carrying case Spare grooving blades for «GROOVER» SHAPE REF. Rounded 95013
95019
ROD Ø 4-5 mm 4 mm
FLOORING TEETH Homogeneous PVC, 8 teeth heterogeneous PVC, carbide sports floor, linoleum tungsten PVC Safety floors
Diamond
Working direction THIN FRONT WHEEL
Supplied in moulded pvc carrying case
131
SPECIAL EQUIPMENT
HOT WELDING PVC – LINOLEUM
Hot air welding guns «Leister« 95080
ROD WELDING
2
230 V
95081
RAPID NOZZLES
110 V
HOT AIR WELDING GUN «TRIAC-S«
This method consists in sealing the groove with a welding rod by melting it with a hot air machine.
Hot air outflow up to 230 l/min. Continuously adjustable temperature from 20°C to 700°C. Heat protection. Electronic protection of the element. Power: 1600 W. Weight: 1.3 kg. Sound level: 65 dB. THE ESSENTIAL Supplied with a regular nozzle. INDOOR AND
(See page 134)
FOR OUTDOOR USE
95012
230 V
Spare element 97008 95082
230 V
95083
110 V
95074
110 V
HOT AIR WELDING GUN «HOT-JET S»
HOT AIR WELDING GUN «TRIAC-PID»
Light and compact, to be used as extra machine for wall welding, cove-cap welding and small finishings. For long jobs, prefer 95080 or 95074. Hot air outflow from 20 to 80 l/min. Continuously adjustable temperature from 20°C to 600°C. Power: 460 W. Weight: 0.580 kg. Supplied with a regular nozzle, in cardbox.
LCD display screen for temperature setting and viewing. Hot air outflow up to 230 l/min. Continuously adjustable temperature from 50°C to 600°C. Heat protection. Electronic element protection. Sound level: 65 dB. Power: 1600 W / 230 V. Weight: 1.4 Kg. Supplied with a regular nozzle, in cardbox.
WELDING WALL COVERINGS
TEMPERATURE DISPLAY
97182
Spare element 230 V
97774
Spare element 230 V
ELECTRONIC WELDING GUN «TRIAC-BT« LIGHTER 1 KG
NE W
Only available in the welding kits
95047
!!
95046
To warm up and soften vinyl flooring, skirtings, angles, stair-nosings. Adjustable hot air outflow up to 500 l/min. Power: 3400 W. Continuously adjustable temperature from 20 to 650 °C. Sound level: 65 dB. Weight: 1.5 Kg.
Filters New ergonomic handle with grip. Better grip
FOR INDOOR USE ONLY New engine
95008
Spare Element 132
Simple welded nozzle. Gets lost no more!
Power: Adjustable temperature: Weight:
110 V
HOT AIR BLOWER «ELECTRON»
New electronic plate
More accessible and visible temperature setting
230 V
1600 W 20 - 600° 1 Kg
97007
Spare element 230 V
HOT WELDING PVC – LINOLEUM
Floor welding kits 95085
230 V
95086
THE BASIC SET
110 V
NE W
«BASIC» FLOOR WELDING KIT
PVC case including: • 1 LEISTER TRIAC BT welding gun • 1 grooving tool 95175 • 1 quarter moon knife 95140 • 1 trimming guide 95150 • 1 spare element • 1 rapid nozzle 95024 • 1 anti-glaze rapid nozzle 95027 • 1 sharpening stone 95190 • 1 nozzle brush 95195 Dimensions: 500 x 190 x 115 mm.
!! NEW BOX
Also, do not forget ... 95120
95145
«PICO» GROOVER
95088
230 V
95089
DOUBLE BLADE TRIMMER
95100
WHEELED HANDGROOVER
Complete PVC : case including
110 V
«PRO» FLOOR WELDING KIT
NE W
Complete PVC case including: • 1 LEISTER TRIAC BT welding gun • 1 grooving tool 95175 • 10 groover spare blades 95176 • 1 quarter moon knife 95140 !! • 1 trimming guide 95150 • 1 leather pouch 95155 • 1 spare element • 1 rapid nozzle 95024 • 1 anti-glaze rapid nozzle 95027 • 1 angle finishing nozzle 95039 • 1 sharpening stone 95190 • 1 nozzle brush 95195 • 1 wire brush 95196 • 1 flat angle template 95446 • One 90° folded angle template 95445 • 1 trimming gouge 95160 • 2 spare blades 95163.
NEW BOX
Welding kit for shower systems 95079
230 V
95084
110 V
SHOWER SYSTEM SET
WALL WELDING KIT Metal case including: • 1 LEISTER HOT JET-S welding gun • 1 wall groover 95125 • 1 triangular carbide groover 95178 • 1 triangular rapid nozzle 95030 • 1 quarter moon knife 95140 • 1 trimming guide 95150 • 1 sharpening stone 95190 • 1 nozzle brush 95195 • 1 high-grade steel ruler with handle 91580 • 1 internal angle roller 93135 • 1 spare element
133
SPECIAL EQUIPMENT
HOT WELDING PVC – LINOLEUM
Turbo nozzles Push-fit directly on welding gun. Supplied with welding guns «LEISTER».
97980
97982
STANDARD TURBO NOZZLE
TURBO NOZZLE «HOT-JET S»
Fits on hot air welding guns «LEISTER TRIAC-S» and «TRIAC-PID» and equivalent. Made off stainless steel.
Fits on «LEISTER HOT-JET S» welding gun.
Push fit nozzles Push-fit in the turbo nozzle.
95030
95024
TRIANGULAR RAPID NOZZLE 4-5 mm
RAPID NOZZLE 4-5 mm For Ø 4 and 5 mm rods. For homogeneous PVC and linoleum floorings.
For welding PVC wall covering.
95039
95027
ANGLE FINISHING NOZZLE
ANTI-GLAZE RAPID NOZZLE 4-5 mm
For melting the rod in angles by pressure.
Narrow (0.9 mm) airflow directed right into the groove. For welding surface-treated PVC, it prevents groove edges from damage. Faster rod melting allows faster welding.
95044
SWAN NECK NOZZLE For finishing angles. For melting the rod in angles by pressure.
95040
95043
«COVING» RAPID NOZZLE 4-5 mm
RAPID NOZZLE FOR MUSHROOM SHAPED ROD
Suits for floor welding and especially for cove-cap welding.
Width: 7.5 mm. Also for PVC triangular strips.
Solder rollers
Wide-slot nozzles Push-fit directly on welding gun.
FOR ROUNDED RODS
95048
To be used with a welding gun equipped with a single nozzle. In brass, for PVC.
ANGLED NOZZLE
95131
Ø : 4 mm
95068
95135
Fits on a TRIAC-S 95080. For paint removal.
Ø : 4 mm
Accessories
95137
95197
PRESSURE ROLLER
BALL-PRESSURE SHAFT
For welding canvas by superposing the 2 sheets, up to 40 mm.
NOZZLE BRUSH To remove all melted rods residues. Length: 16 cm.
93135
INTERNAL ANGLE ROLLER 134
!!
ANGLED NOZZLE 60 CM
In Teflon, for linoleum.
95195
NE W
For welding of PVC canvas covers, in conjunction with a pressure roller 95137. Width: 20 mm.
For pressing the covering when welding in internal angles. Brass ball Ø 13 mm.
93138
DOUBLE ANGLE ROLLER For internal and external angles.
95196
WIRE BRUSH
To clean the metal parts of the welding gun. Length: 25 cm.
93139
ROLLER-SMOOTHER
For pressing coverings in angles; flat side for smoothing.
SPECIAL EQUIPMENT
HOT WELDING PVC – LINOLEUM
Self-propelled welding machine LEISTER «UNIFLOOR» WELDING MACHINE
WITH CABLE REEL SUPPORT
Self-propelled. To weld all types of PVC as well as linoleum. Electronic temperature, speed and air flow control system. Supplied in a moulded PVC carrying case.
AUTOMATIC STOPPING DEVICE WHEN TOUCHING THE WALL: • stopping of advance
Pre-heating and starting.
Advance Working direction
ROD WHEEL Does not store heat ROD GUIDE
Put the nozzle in alignment with the rod to be welded.
Power : Adjustable temperature: Adjustable speed Air flow: Noise level: Weight: Dimensions:
FRONT GUIDE WHEEL
FRONT GUIDING WHEEL
95253
UNIFLOOR ANTI-GLAZE NOZZLE
2300 W / 230 V from 20 to 620°C de 0.5 to 7.5 m/min maxi 300 l/min 67 Db 14 Kg 420 x 270 x 215 mm
95098
PVC carrying case
Fits onto automatic welder UNIFLOOR. The narrow hot airflow is directed right into the groove, preventing its edges from any damage. STANDARD NOZZLE FOR VINYL AND LINOLEUM SUPPLIED
95250
230 V
95251
110 V
«UNIFLOOR»
95252
«UNIFLOOR DIGITAL» MODEL N° 1
MODEL N° 2
Digital display indicating speed and temperature.
SPEED ADJUSTMENT
SPEED ADJUSTMENT
DIGITAL DISPLAY CONTROL FOR SPEED AND TEMPERATURE
ADVANCE SWITCH TEMPERATURE ADJUSTMENT
Supplied in a moulded PVC carrying case that can also contain the grooving machine GROOVER.
ADVANCE SWITCH
AIR FLOW ADJUSTMENT
TEMPERATURE ADJUSTMENT
135
SPECIAL EQUIPMENT
HOT WELDING PVC – LINOLEUM
Rod trimming ROD TRIMMING
3
In order to trim the excess of welded rod. Do not trim in one go. Pre-Trim first with the trimming guide. Then wait the rod to cool down. Then trim again without trimming guide.
95150
TRIMMING GUIDE Addition to the quarter moon knife, for pre-trimming the welding rod with coating protection.
QUARTER MOON KNIFE 95140
Straight blade
Pre-trimming
Final trimming
PRE-TRIMMING WITH THE TRIMMING GUIDE. Once the rod is cold, you will achieve smooth trimming with only the quarter moon knife.
95141
Angled blade (10°)
95155 95190
SHARPENING STONE
To sharpen the quarter moon knife, grooving tools… Dimensions: 100 x 50 x 12 mm.
LEATHER POUCH Safety holster and protector of the quarter moon knife.
95160
TRIMMING GOUGE
95192
STONE SHARPENING
Multipurpose groover, depending on inserted blade. To be used on cold rod only. Supplied with a rounded blade 95161.
Ideal for sharpening the quarter moon knives. Dimensions: 152 x 50 x 19 mm.
95161 95182
NARROW TRIMMER «TRIM»
For trimming welding rods in hard-to-reach areas. To be used on cold rod. Width: 10 mm. Reversible carbide blade.
Rounded blade
Ø 6 mm (Pack of 2) For trimming welding rods alongside skirtings or in cove-cap skirtings, stairs angles.
95163
Flat blade 95183
Spare blade 95172
NARROW TRIMMER
For trimming welding rods in hard-to-reach areas. To be used on cold rod. Width: 10 mm.
95191
File 136
To sharpen the narrow trimmer 95172.
For trimming rods alongside joints or in cove-cap skirtings. (Pack of 2)
95162
Rounded blade
Ø 12 mm. (Pack of 2) For trimming welding rods alongside skirtings or in cove-cap skirtings, stairs angles.
95164
Pointed blade For grooving. (Pack of 2)
95145
DOUBLE BLADE TRIMMER
2 blades slightly offset. The first one for pre-trimming and the second one for definitive trimming. Easy trimming. To be used on cold rod, following the arrow.
95146
Spare blades
SPECIAL EQUIPMENT
HOT WELDING PVC – LINOLEUM
Rod trimming 95130 Revolutionary tool that combines – trimming blade – trimming guide that easily retracts for final trim.
Supplied in a PVC box with 2 trimmer guides - 1 for PVC, th. 0.5 mm - 1 for linoleum, th. 0.7 mm Dim. 170 x 30 x 30 mm Weight: 165 g
NE W
MOZART «2 in 1» TRIMMING KNIFE
!!
NO RISK OF CUTTING INTO THE FLOORING Ergonomic handle
Pre-trimming with the guide
95129
Guide function
Card with 5 spare blades 95128
0.5 mm trimmer guide 95127
Retractable trimming guide for final trim
0.7 mm trimmer guide Final trim without guide
«I-TOOLS» - Standing position 95705
95765
I.T. TELESCOPIC HANDLE Extendible from 1 m to 1.90 m
For trimming in standing position with the MOZART 95130 trimmer. Supplied without handle and without MOZART trimmer
nE W
HANDLE TO BE ORDERED SEPARATELY
MOZART I.T. SUPPORT
95730
I.T. SCRIBER For scribing linoleum before cutting it with the knife. Supplied without handle.
95735
!!
95740
I.T. SUPPORT FOR WELDER For hot welding in standing position. Supplied without handle and without welding gun.
95745
I.T. HOOK BLADE CUTTER
I.T. ROD TRIMMER
For cutting all soft floors (carpet, PVC, linoleum). Ideal for after scribing on linoleum. Supplied without handle. Spare blade Large hook 92226
For trimming rods after hot welding. Do a pre-trimming with the guide 95150. Supplied without handle.
692136
Pack of 10 spare blades
137
SPECIAL EQUIPMENT
CARPET STRETCHING
Tools
93930
HEAT SEAMING IRON
HEAT SEAMING TAPES
Temperature control. Voltage: 230 V. Power: 750 W. Thermostat with 4 temperature selections. Supplied in a metal case with an iron base.
Silicon paper. Glass fibre base. (20 m x 9 cm roll).
93940
Standard
For Hessian or textile backed carpets.
93941
Super
Special adhesive formula. For all textile, foam or plastic backings and especially for «action-back».
93822
93800
MAGNETIC HAMMER
EXTENDABLE KNEE KICKER
Length: 275 mm.
From 44 to 52 cm. Supplied assembled with protective cap.
93820
SUPER TACK HAMMER
Forged steel. Nail claw. Length: 285 mm.
93950
93916
CARPET PINCHER
To hold or tighten up both sides of the carpet joint.
NE W
90977
STAPLING HAMMER
SEAM ROLLER
Wooden handle. Width 110 mm.
!!
90978
Staples
10 mm / 5000 pces.
93810
93860
POWER STRETCHER
CLAWBAR
Adjustment pin depth. Automatic locking system for operating in any direction. Wide non marking rubber tale block. Supplied in plastic carrying case including one 58 teeth head, 4 standard extension tubes to reach overall length of 7.50 m + 1 extension tube for precise length adjustment.
Very robust. Nickel-plated.
STAIR TOOL
Used to fix carpet behind the gripper after trimming. Polished chromium plated steel.
93840
Width: 7 cm 93841
Very sharp tip.
93570
93870
Plastic head pins
Needles Curved, 75 mm long. Pack of 25 needles.
93522 Curved, 90 mm long. Pack of 25 needles.
93531 Straight carpet needles, 65 mm long. Pack of 10 needles.
93522
93521
Length: 60 mm. Box of 100.
93580
Flax reel Glossy ecru n° 20. Reel of 100 g.
93531
93018
ANTI-FRAYING SPRAY See page 105
NE W
93521
138
AWL
Hedgehog set
Width: 9 cm
NAPPING SHEARS
93850
97898
!!
TILING PROFILE 0 STRIPS see p.5
NE W
SPECIAL EQUIPMENT !!
Cutting 94969
94843
94847
CARBIDE JOINT SCRAPER + KNURL
PARROT NIPPERS
TILE PINCERS
Length 200 mm Supplied on card
NE W
Length 200 mm Supplied on card
!!
Integrated knurl for tile cutting
Wooden handle. Steel blade 280 x 130 mm
Wooden handle. Steel blade width 250 mm
Ref.
94806
8 x 8 mm
94807
10 x 10 mm
94808
10 x 10 mm rounded
94809
Teeth
NE W
6 x 6 mm
94829
SPONGE FLOAT
Dim. 280 x 140 x 30 mm
94832
94959
RUBBER MALLET Does not stain. Ø 60 mm.
Spatulas ADHESIVE SPREADERS
ADHESIVE TROWELS
Teeth
CERAMIC TOOLS
94967
KNEELING MAT
In cellular rubber Dim. 370 x 250 mm
Ref.
6 x 6 mm
94814
8 x 8 mm
94818
10 x 10 mm
94819
!!
Joints
94823
«PRO» JOINTING TROWEL
Bevelled edge compact rubber for epoxy joints. 250 x 100 x 20 mm
94828
23 LITERS JOINT TROUGH
With 4 wheels, 2 drying rollers. Dim.: 490 x 40 x 240 mm Supplied with 1 sponge float
94825
HYDRO SPONGE
STANDARD JOINTING TROWEL
Dim. 165 x 110 x 65 mm
Rubber foam 280 x 140 mm
PVC TILE SPACERS Joints
Pack
Ref.
2 mm
250 units 94971
3 mm
250 units 94976
4 mm
250 units 94977
5 mm
200 units 94978
139