2 minute read

Praga OC-1 Filters

PRAGA FILTERS WITH OC-1 FILTRATION MEDIA

Description:

Bobbin wound fibreglass commercial filters with diameters from 1050mm to 2000mm. All Praga OC-1 Filters are supplied pre-loaded with OC-1 Filtration media.

OC-1 Filtration Media - The future of swimming pool filtration

OC-1 is an open cell media that has very low resistance to allow more water to be turned over in a pool. It has a huge capacity to store debris and matches the filtration quality of sand and glass filter media. However unlike all other media, the flow rate will not slow down once a small amount of dirt is caught, therefore optimising your filtration system and resulting in healthier water for you and your clients.

Light Weight - Unlike sand, gravel and glass, OC-1 is incredibly lightweight so is easy to handle and transport.

Save Power - It can reduce variable speed pumps by around 20% to achieve the same water flow through the filter without compromise, producing impressive energy savings.

Save Water - The huge debris retention results in less back washing frequency. On new installations a smaller pump can be specified to produce the same flow – saving running costs and initial outlay.

Save Time - Due to its constant flow rate and huge debris capacity, OC-1 only needs to be backwashed once every 3 months.

Warranty:

Refer to www.astralpool.com.au for all warranty details.

Model

Product Code PRAGA OC-1 FILTER 1050 10033 PRAGA OC-1 FILTER 1200 10035 PRAGA OC-1 FILTER 1400 10036 PRAGA OC-1 FILTER 1600 10037 PRAGA OC-1 FILTER 1800 10038 PRAGA OC-1 FILTER 2000 10039 Connections 80MM 80MM 100MM 100MM 100MM 150MM Rating 2.5 BAR 2.5 BAR 2.5 BAR 2.5 BAR 2.5 BAR 2.5 BAR

SUPPLIED WITH OC-1 MEDIA

COMMERCIAL POOLS

OC-1 media really excels in the commercial sector.

Potential savings in running costs come from the ability to reduce pumps speed or use smaller pumps, reduced backwashing and water consumption.

HIGH QUALITY FILTRATION

The debris capacity of OC-1 is more than 20 times that of sand or glass.

OC-1 removes 81% of 10 micron particles in a single pass and can even remove particles as small as 1 micron without flocculation or coagulation. The OC-1 filter range covers all applications from small domestic to the largest commercial installations.

It is simple to convert an existing sand filter for use with OC-1.

This article is from: