Home about us Products services contact us
FMENGINEERS
>> Industrial Brake
INDUSTRIAL BRAKE Industrial Brakes are used to stop the motion of Drive or Driven in Power Transmission. We have various Industrial Brakes like D.C. Fail Safe Brake, A.C. Fail Safe Brake, Normally Off Type Brakes, Pneumatic Brakes, A.C. Disc Brakes, A.C. Shoe Brakes & Electro Hydraulic Thruster Brakes. D.C.FAIL SAFE BRAKE (USB/UMB) D.C. Fail Safe Brakes are operating on D.C. Supply and used to stop motion where emergency stop is required. The Brake is normally in ON Condition ( In Braking Condition) and when D.C. Supply is given to the coil, the Armature Plate attracts towards the Brake Stator against the springs. When the supply is cut off, the brake will engage by means of spring pressure. SPECIFICATIONS: •Torque: 2 Nm to 1600 Nm •Voltage: 24 / 96 / 105 / 190 / 205 VDC •Other Voltages on Request APPLICATIONS: •Brake Motors •Cranes , Hoists, Lifts & Material Handling Equipments. •Textile Machinery •Printing Machines •Marble / Granite Machinery •Steel, Cement & Paper Plants •Industrial Presses •Industrial Robotics •Wind Mills
converted by W eb2PDFConvert.com
FLANGE MOUNTED BRAKE (NORMALLY OFF) TYPE : UFB Electromagnetic D.C. Flange Mounted Brakes are Normally Off type Brakes. These Brakes are applied after disconnecting the supply to the Drive or Driven. External D.C. Voltage will be given to the brake stator (coil) which attracts the Armature and thus the brake is applied. SPECIFICATIONS : Torque: 8 Nm to 2550 Nm ( Higher Torques on Request) Design: 202 / 204 / 206 Voltage: 24 / 96 / 105 / 190 / 205 VDC ( Other Voltages on Request ) APPLICATIONS : •Textile Machines & Looms •Printing & Packaging Machines •Pick & Place Robots •Machine Tools •Brake Motors for Textile Looms •Coil Winding Machines •Wire Drawing Machines •Special Purpose Machines.
A.C.FAIL SAFE BRAKE (TYPE :SSB & SMB) A.C. Fail Safe Brakes are operating on A.C. Supply (440 VAC) and used to stop motion where emergency stop is required. The Brake is normally in ON Condition ( In Braking Condition) and when A.C. Supply is given to the coil, the Armature Plate attracts towards the Brake Stator against the springs. When the supply is cut off, the brake will engage by means of spring pressure. SPECIFICATIONS : Torque: 5 Nm to 90 Nm Voltage: 440 VAC APPLICATIONS : •Brake Motors •Cranes , Hoists & Lifts •Printing Machines •Gate Drives •Steel, Cement & Paper Plants •Wire Drawing Machines •Construction Machinery
converted by W eb2PDFConvert.com
WIND MILL BRAKE Wind Mill Brakes are D.C. Fail Safe Brakes, specially designed for Pole Motor & Yaw Motor of Wind Turbines. These brakes are manufactured with IP 55 Protection with Class F Insulation. Thermisters are provided to safe guard the brakes due to over heat.
PNEUMATIC BRAKE (TYPE:UPNB) Pneumatic Brakes are Fail Safe in nature. When pneumatic pressure (air) is applied, the brake will be released and will allow the prime mover to run. When the pneumatic pressure is released, the brake will engage and stop the motion. SPECIFICATIONS : •Torque: 15 Nm to 100 Nm APPLICATIONS : •Textile Machines •Wire Drawing Machines •Converting Machines •Rubber Machinery •Film & Foil Tensioning Systems •LK 54 Comber Machine
converted by W eb2PDFConvert.com
ELECTRO HYDRAULIC THRUSTER BRAKE These Electro Hydraulic Thruster Brake (A.C. Thruster Brakes) are also known as Electro Hydraulic Fail Safe Brakes. The Brake Shoes are normally in engage condition with Brake Drum. When Electro Hydraulic Thruster is energized, it releases the brake shoes from brake drum and drum will be rotating freely. When De-energised the EH Thruster, the Brake is engaged. SPECIFICATIONS : •Torque 50 Nm to 1900 Nm •Drum diameter 100 / 150 / 200 / 250 / 300 / 400 / 500 (in mm) APPLICATIONS : •Cranes , Hoists & Lifts •Conveyors •Material handling Equipments •Steel Plants & Steel Rolling Mills •Cement Plants & Mining Equipments
AC DISC BRAKE (TYPE: SADB) AC Disc Brakes (Type: SADB) is Fail Safe Type Brake operates on AC Voltage. It is used where emergency stop is required. It works on Electro Mechanical Principle. When Power is applied, due to electromagnetic flux developed between solenoid mating part and get s attracted against spring force & allows the rotor to run. When power supply is withdrawn, due to spring force, armature returns back to original position & clamps the rotor and stops the motion. SPECIFICATIONS : Torque Range : 3 Nm Torque to 110 Nm Torque Coil Voltage : 440 VAC APPLICATIONS : •Cranes & Hoists •Brake Motors •Steel Rolling Mills •Sluice Gates
converted by W eb2PDFConvert.com
ELECTROMAGNETIC A.C. SHOE BRAKE - TYPE :SAC SYTCO A.C. Shoe Brakes are Normally On Type Brakes ( A.C. Fail Safe Brakes). The Brake is normally in On Condition & when A.C. Power supply is given to the coil, it will attract the Armature. The Lever fitted with the spring will be actuated and thus the brake opens and allow the prime mover to run freely. When power supply is withdrawn, due to spring pressure, the brake shoes go back to its own position and stop the motion. SPECIFICATIONS: Drum Diameter : 4” ( 14-21 Nm ) / 5.5” ( 35-50 Nm ) & 7” ( 70-102 Nm) Coil Voltage : 440 VAC APPLICATIONS : •Cranes & Hoists •Over Head Doors •Machine Tools •Conveyor Systems •Material Handling Equipments •Printing Machines •Steel Plants & Steel Rolling Mills •Wire Drawing Machines.
Electromagnetic brakes manufacturers in Coimbatore
Copyright2014@fmengineers.com
converted by W eb2PDFConvert.com