www.hyundaisolar.com
Hyundai Solar Module | MG-Series | �Multi-crystalline Type HiS-M223MG | HiS-M225MG | HiS-M228MG | HiS-M230MG HiS-M233MG | HiS-M235MG | HiS-M238MG
�Mono-crystalline Type HiS-S235MG | HiS-S238MG | HiS-S240MG | HiS-S243 MG HiS-S245MG | HiS-S248MG | HiS-S250MG
Mechanical Characteristics Dimensions Weight
983 mm (38.7″ ) (W) × 1645 mm (64.76″ ) (L) × 35 mm ″ 19.0 kg (41.9 Ibs) Approx.
Solar cells
60 cells in series (6×10 matrix)
Output cables
4 mm2 (12AWG) cables with polarized weatherproof connectors, IEC certified, Length 1.0 m (39.4″ )
Junction box
IP65, weatherproof, IEC certified
Bypass diodes
3 bypass diodes to prevent power decrease by partial shade
Construction
Front : High transmission low-iron tempered glass, 3.2 mm (0.126″ )
Frame
Clear anodized aluminum alloy type 6063
High Quality
Fast and Inexpensive Mounting
�IEC 61215(Ed.2) and IEC 61730 by TÜV Rheinland �Output power tolerance +3/-0% �ISO 9001:2000 and ISO 14001:2004 Certified �Advanced Mechanical Test (5,400 Pa) Passed (IEC)
�Delivered ready for connection �Pre-confectioned cables �IEC certified and weatherproof connectors �Integrated bypass diodes
Limited Warranty �5 years for product defect �10 years for 90% of warranted min. power �25 years for 80% of warranted min. power
�Qualified, IEC 61215 IEC 61730 �Periodic inspection
※ Important otice on Warranty The warranties apply only to the PV modules with Hyundai Heavy Industries Co., Ltd.'s logo (shown below) and product serial number on it.
Electrical Characteristics | Multi-crystalline Type | 223
225
228
HiS-M ��� MG 230
233
235
Nominal output (Pmpp)
W
223
225
228
230
233
235
238 238
Voltage at Pmax (Vmpp) Current at Pmax (Impp)
V A
30.0 7.4
30.0 7.5
30.0 7.6
30.1 7.7
30.3 7.7
30.3 7.8
30.4 7.8
Open circuit voltage (Voc)
V
36.8
37.1
37.1
37.1
37.3
37.4
37.4
Short circuit current (Isc) Output tolerance
A %
8.0
8.2
8.2
8.2 +3/-0
8.2
8.3
8.3
No. of cells & connections
pcs
Cell type Module efficiency Temperature coefficient of Pmpp
% %/K
14.5 -0.43
14.7 -0.43
Temperature coefficient of Voc
%/K
-0.32
-0.32
-0.32
-0.32
-0.32
-0.32
-0.32
Temperature coefficient of Isc
%/K
0.056
0.056
0.056
0.056
0.056
0.056
0.056
250
60 in series 6” Multi-crystalline silicon 13.8 -0.43
13.9 -0.43
14.1 -0.43
14.2 -0.43
14.4 -0.43
※ All data at STC (Standard Test Conditions). Above data may be changed without prior notice.
| Mono-crystalline Type | 235
238
240
HiS-S ��� MG 243
245
248
Nominal output (Pmpp)
W
235
238
240
243
245
248
250
Voltage at Pmax (Vmpp)
V
29.8
29.8
30.1
30.1
30.3
30.3
30.5
Current at Pmax (Impp) Open circuit voltage (Voc)
A V
7.9 37.0
8.0 37.0
8.0 37.3
8.1 37.3
8.1 37.4
8.2 37.5
8.2 37.5
Short circuit current (Isc) Output tolerance
A %
8.4
8.5
8.5
8.6 +3/-0
8.6
8.7
8.7
No. of cells & connections
pcs
Cell type Module efficiency
%
14.5
14.7
14.8
15.0
15.2
15.3
15.5
Temperature coefficient of Pmpp Temperature coefficient of Voc
%/K %/K
-0.44 -0.34
-0.44 -0.34
-0.44 -0.34
-0.44 -0.34
-0.44 -0.34
-0.44 -0.34
-0.44 -0.34
Temperature coefficient of Isc
%/K
0.052
0.052
0.052
0.052
0.052
0.052
0.052
60 in series 6” Mono-crystalline silicon
※ All data at STC (Standard Test Conditions). Above data may be changed without prior notice.
| Module Diagram |
(unit : mm, inch)
| I-V Curves |
19.5(0.77″)
Current [A] 10 9 8
B ( ‐) 1,000mm(39.37″), 4mm2 CABLE & CONNECTOR
8.5(0.33″)
( +) 1,000mm(39.37″), 4mm2 CABLE & CONNECTOR
1 0
C A DRAIN HOLES
C’
Operating Cell Temp = 65 ºC 5
Incid. Incid. Incid. Incid. Incid.
8 7
10(0.39″)
10
15
20
25
30
35
40
30
35
40
Current [A] 9
DETAIL B
6
Irrad Irrad Irrad Irrad Irrad
= 1100 W/m2 = 1000 W/m2 = 900 W/m2 = 800 W/m2 = 700 W/m2
5
35(1.38″)
272.5(10.73″) 150(5.91″)
8‐L11(0.43″) X ø7(0.28″) HOLES
983(38.70″)
8(0.31″)
400(15.75″)
2 X ø4.0(0.16″) GROUND HOLE
Incid. Irrad = 1000 W/m2 Operating Cell Temp = 5 ºC Operating Cell Temp = 25 ºC
4
ø7(0.28″)‐L11(0.43″)
GROUND MARK
1645(64.76″)
5
DETAIL A
4 3
30(1.18″)
1.8(0.07″)
2 1 0
SECTION C‐C’
Cell temp. = 25 ºC 5
10
15
20
25
Voltage [V]
| Installation Safety Guide | Only qualified personnel should install or perform maintenance. Be aware of dangerous high DC voltage. Do not damage or scratch the rear surface of the module. Do not handle or install modules when they are wet.
Sales & Marketing 140-2, Gye-dong, Jongno-gu, Seoul, Korea
Nominal Operating Cell Temperature
46 ℃ ± 2
Operating Temperature Maximum System Voltage Maximum Reverse Current
-40 - 85 ℃ DC 1,000 V (IEC) 15 A
Tel: 82-2-746-7563, 8405, 8406
Fax: 82-2-746-7675 Latest Update: November 2010